采薇平顶海山群底质类型分布研究

<正>富钴结壳主要生长在水深400~4000 m的中、西太平洋海山山顶边缘和斜坡位置,其中1000~3000m水深范围内最为富集。就具体海山而言,富钴结壳易生长于山顶周边平台和鞍部(Hein,et al.,2000)。海山钙质远洋沉积、碳酸盐岩沉积及重力作用引起的滑塌沉积是海山山顶和斜坡的主要沉积类型。本文利用中国大洋36航次最新获得的EM122多波束测深和回波强度资料,对采薇平顶海山群进行地形     

东营凹陷滑塌型重力流沉积分布特征及三角洲沉积对其影响

三角洲沉积为滑塌型重力流的形成提供了物质来源,它对前端滑塌型重力流的沉积分布特征具有重要影响.以东营凹陷洼陷带沙三中亚段三角洲-前端滑塌型重力流沉积为研究对象,综合利用钻井岩心、三维地震、测录井及分析测试等资料,总结不同类型滑塌型重力流沉积特征、识别标志和分布特征,分析三角洲作为物源对滑塌型重力流的形成、沉积类型、沉积特征和分布特征的影响.研究表明,研究区滑塌型重力流沉积主要发育滑动岩、滑塌岩、碎屑流沉积和浊积岩4种类型,不同类型其沉积构造、粒度特征、地球物理特征差异显著.研究区砂质碎屑流沉积最为发育,滑动滑塌沉积次之,浊流沉积和泥质碎屑流沉积少量发育.不同地区重力流沉积发育程度及常见垂向序列存在差异,博兴南坡与辛133区块重力流类型以砂质碎屑流沉积为主,常见多期次砂质碎屑流沉积相邻或相间垂向组合;牛庄南坡与中央隆起带地区类似,由近及远,重力流类型及垂向序列存在较大差异;营11区块以砂质碎屑流沉积和浊流沉积为主,浊流比例相对其他区块较高;丰14区块单井重力流类型整体较单一,为砂质碎屑流沉积或滑塌沉积.三角洲砂泥百分含量控制了滑塌型重力流的沉积类型和沉积特征;三角洲沉积物粒径控制原始前积角大小,前积角越大,滑塌型重力流越发育,但滑移距离相对越近;三角洲的坡折点控制下,滑动滑塌沉积主要分布在斜坡坡脚和同沉积断层附近,浊流沉积主要分布在深水平原,碎屑流沉积在斜坡坡脚-深水平原均有分布;三角洲高的堆积速率通过减小内摩擦力促使滑塌型重力流的形成,其堆积速率与构造沉降速率的差异对滑塌型重力流沉积的垂向叠置和侧向连续性也具有重要影响.      

莱恩海山链MP2海山富钴结壳Co元素的富集/亏损研究

富钴铁锰结壳(简称富钴结壳或海山结壳)是生长在大洋洋底地势较高处(如海山)硬质基岩上的富含铁、锰、钴、铂、稀土等金属元素的"壳状"沉积矿产.与其它深海铁锰沉积相比较,海山结壳的的最主要特征是富Co,其Co含量是大洋铁锰沉积中最高的.但是,同一富钴结壳样品的不同层位Co含量的差异是比较大的,到目前为止,人们并没有充分认识富钴结壳为什么"富钴",即Co发生富集/亏损的原因.本文通过对莱恩海山链MP2海山的一块典型富钴结壳样品电子探针原位化学成分数据的系统分析,对富钴结壳形成过程中Co富集/亏损的原因进行了系统研究,以揭示富钴结壳中的Co富集机制以及富钴结壳成矿作用是否具有时代的特殊性.     

异地碳酸盐岩块体与碳酸盐岩重力流沉积研究及展望

异地碳酸盐岩块体是指已固结或半固结的、经过一定距离搬运再沉积而产于正常沉积地层中规模 较大的碳酸盐岩块,它和碳酸盐岩重力流沉积均属于再沉积碳酸盐岩。文章分析了岩崩、岩屑崩坍、海底滑坡、 滑塌和碎屑流沉积的过程,讨论了异地碳酸盐岩块体的沉积机制;归纳了异地碳酸盐岩块体形成的主要地质背 景,认为异地碳酸盐岩块体可见于活动大陆边缘、被动大陆边缘、海山和前陆盆地等地质环境中;着重介绍了 异地碳酸盐岩块体和碳酸盐岩重力流沉积的研究进展,即线源式的碳酸盐岩裙沉积和点源式的碳酸盐岩海底扇 沉积;最后,阐释了滑来岩块、滑塌堆积和碎屑流沉积的区别与联系,总结了孤立碳酸盐岩块体的搬运沉积机 制,对比区分了碳酸盐岩裙沉积和碳酸盐岩海底扇的沉积特征,认为它们在斜坡环境、沉积物类型和沉积特征 等方面存在诸多不同。     

渤中25-1油田沙三段重力流沉积模式及油气地质意义

运用最新重力流沉积理论,以钻井岩芯、地震资料为基础,系统研究了渤海海域渤中25-1油田沙三段重力流沉积特征、类型、岩相组合、砂体空间展布特征以及沉积模式。结果表明,研究区主要发育滑塌重力流、砂质碎屑流、浊流3种重力流沉积类型,并构成5种典型的岩相组合,包括湖相细粒沉积与滑塌重力流组合（MS）、砂质碎屑流与滑塌重力流组合（DS）、砂质碎屑流与浊流组合（DT）、浊流与砂质碎屑流组合（TD）、湖相细粒沉积与浊流组合（MT）。研究区重力流沉积具有"源-坡-断-流"联控的"滑塌-砂质碎屑流-浊流"沉积过程与发育模式,其中砂质碎屑流砂体呈舌状体分布,浊流砂体则具有朵状体形态特征。储层综合评价表明,砂质碎屑流砂体粒度粗、宽厚比小、泥质含量低、物性好,是优质的重力流储层类型。对不同重力流类型沉积特征、展布形态以及储层性质的精细研究,对深水优质砂岩储层的预测具有重要的指导意义。     

鄂尔多斯盆地陇东地区延长组重力流沉积特征及其模式

利用岩心、测井资料和重力流沉积理论,系统研究了鄂尔多斯盆地陇东地区延长组重力流沉积特征及其沉积模式。该区重力流沉积物可分为浊积岩、砂质碎屑流沉积物、泥质碎屑流沉积物和滑塌岩。其中,浊积岩发育正粒序;砂质碎屑流沉积物以冻结块状沉积为特征;泥质碎屑流沉积物以泥质为主,内部含少量砂质颗粒和砂质团块;滑塌岩发育包卷层理等液化构造。不同重力流沉积物发育程度差异明显,浊积岩和砂质碎屑流沉积物的钻遇井数最多,泥质碎屑流沉积物最少。在重力流单期沉积厚度方面,砂质碎屑流沉积物单期沉积厚度平均为0.986m,明显高于其他类型;浊流沉积厚度最低,平均厚度为0.414m。本区重力流是由三角洲前缘沉积物失稳滑塌所致,砂质碎屑流沉积物和浊积岩是主要的重力流沉积类型,其次为滑塌岩和泥质碎屑流沉积物。砂质碎屑流沉积物主要发育于北东向曲流河三角洲前缘前方的深水区;浊积岩主要发育于西部、西南部和南部物源形成的辫状河三角洲前缘前方的深水区域;泥质碎屑流沉积物和富含泥砾砂质碎屑流沉积物在平面分布极少,且规律不明显。     

东营凹陷沙三中亚段三角洲前缘滑塌型重力流岩相类型及其分布特征

以东营凹陷沙三中亚段三角洲前缘滑塌型重力流砂体为研究对象,利用三维地震、钻井岩心、测录井和分析测试等资料,开展三角洲前缘滑塌型重力流砂体岩相和岩相组合类型划分及分布特征研究。根据泥质含量和沉积构造,划分出13种岩相类型,其中块状层理砂岩相在研究区最为发育。以泥岩、冲刷面或岩相转化面为界,划分出20种岩相组合类型,分为5大类,分别是保留原始沉积构造的岩相组合、变形构造发育的岩相组合、块状层理和碎屑发育的岩相组合、下部碎屑流和上部浊流沉积的岩相组合,以及不完整鲍马序列的岩相组合,反映重力驱动事件中的滑动、滑塌、碎屑流、碎屑流-浊流、浊流沉积作用。根据不同类型重力流的垂向组合和典型剖面岩相分布特征,认为从盆地斜坡到盆地平原,重力流呈现滑动-滑塌-碎屑流-浊流演化特征,滑塌近端主要发育滑动作用岩相组合和滑塌作用岩相组合,滑塌中部主要发育碎屑流岩相组合和碎屑流与浊流过渡转化岩相组合,滑塌远端主要发育浊流作用岩相组合。     

鄂尔多斯盆地南部三叠系延长组深水重力流沉积特征及其石油地质意义

通过大量岩心观察、钻测井资料分析及野外露头观察,对鄂尔多斯盆地南部延长组长6—长7深水重力流沉积特征、触发机制、沉积过程、沉积模式及石油地质意义进行了系统分析。研究结果表明:研究区共存在滑动岩体、滑塌沉积、砂质碎屑流沉积、浊流沉积及泥质碎屑流沉积5种类型的重力流沉积物,各类型的沉积物特征明显。不同类型重力流沉积物垂向组合可分为5类,研究区重力流的形成过程可分为5个阶段:三角洲前缘沉积阶段、滑动阶段、滑塌变形阶段、砂质碎屑流及泥质碎屑流形成阶段以及浊流形成阶段。滑动、滑塌砂体多呈孤立透镜体状,砂质碎屑流砂体多以扇沟道的形式展现出来,浊流砂体多分布在扇沟道的前端或侧翼,呈席状砂展布。深水重力流砂体垂向叠置厚度大,可形成规模大的油藏,大大扩展了深湖的勘探范围。研究区长6、长7油层组砂质碎屑流砂体储集层物性较好,含油性好,是重点勘探层位。     

“距离-坡度”变差函数及海山结壳Kriging估计

<正>由于海山富钴结壳分布受控于水深,传统基于"距离-方向"的变差函数无法表达其空间自相似性或各向异性。为了利用地质统计学方法估计海山富钴结壳资源,本文提出一种全新的适合海山富钴结壳空间分布特征的变差函数方法。该方法包括:初步定义以海山富钴结壳数据为模型的3D表面随机变量;提出基于"距离-坡度"或"距离-相对水深"的实验变差函数方法;给出与之相匹配的理论变差函数模拟方法。将该方法示范应用于某海山富钴结壳厚度的空间估计,估计效果表明:这种新变差函     

大洋富钴结壳资源调查与研究进展

富钴结壳是继多金属结核资源之后被发现的又一深海沉积固体矿产资源,在太平洋、大西洋和印度洋的海底均有分布。据估算,全球三大洋海山富钴结壳干结壳资源量为(1081.1661~2162.3322)×108t。世界各国对富钴结壳的调查始于20世纪80年代初,截至目前,已有日本、中国、俄罗斯和巴西等4个国家与国际海底管理局签订了富钴结壳勘探合同,而韩国的矿区申请也于2016年获得核准。富钴结壳按形态可分为板状结壳,砾状结壳和钴结核3种类型。富钴结壳内部结构构造在宏观上通常表现为三层构造,即底部亮煤层、中部疏松层和顶部较致密层;在微观下主要表现为柱状构造、叠层构造、斑块状构造、纹层状构造等多种类型。富钴结壳的矿物成分主要为自生的铁锰矿物,包括水羟锰矿、钡镁锰矿、羟铁矿、四方纤铁矿、六方纤铁矿、针铁矿等。富钴结壳富含Mn、Fe、Co、Ni、Cu、Pb、Zn等金属元素以及稀土元素和铂族元素,其中Co含量尤为显著。三大洋中,以太平洋富钴结壳的Co平均含量最高。富钴结壳的生长过程极其缓慢,平均仅几毫米每百万年。研究表明,西太平洋富钴结壳最早于始新世-早中新世开始生长。目前通常认为富钴结壳为水成成因,即Co、Fe、Mn等金属元素来源于海水。此外,有研究表明微生物在富钴结壳的形成过程中也起着非常重要的作用。富钴结壳的分布及特征受地形、水深、基岩类型、海水水文化学特征、经纬度等多种因素的影响,其主要分布于碳酸盐补偿深度以上、最低含氧带以下、水深800~2500 m的海山、岛屿斜坡和海底高地上,西、中太平洋海山区被认为是全球富钴结壳的最主要产出区。     

Distance-gradient-based variogram and Kriging to evaluate cobalt-rich crust deposits on seamounts

The spatial distribution of cobalt-rich crust thicknesses on seamounts is partly controlled by water depth and slope gradients. Conventional distance–direction-based variogram have not effectively expressed the spatial self-correlation or anisotropy of the thicknesses of cobalt-rich crusts. To estimate resources in cobalt-rich crusts on seamounts using geostatistics, we constructed a new variogram model to adapt to the spatial distribution of the thicknesses of the cobalt-rich crusts. In this model, we defined the data related to cobalt-rich crusts on seamounts as three-dimensional surface random variables, presented an experimental variogram process based on the distance–gradient or distance–“relative water depth,” and provided a theoretical variogram model that follows this process. This method was demonstrated by the spatial estimation of the thicknesses of cobalt-rich crusts on a seamount, and the results indicated that the new variogram model reflects the spatial self-correlation of the thicknesses of cobalt-rich crusts well. Substituted into the Kriging equation, the new variogram model successfully estimated the spatial thickness distribution of these cobalt-rich crusts.     

Distribution and Classification of Cobalt-Rich Crust

INTRODUTIONThe sea- floor metallic mineral resources are classified asmany types such as multi- m etallic nodules,metallic oozes,massive sulfide deposits and iron- manganese crusts.Before1980 s,China did not made any researches into metallic oozeand massive sulfide deposits;but China started to study m ul-ti- metallic nodules in the early1980 s,15 - 2 0 years later thanthe developed industry countries did.However,in the shortten years,we have caught up with the developed countries,and our…     

中太平洋海山多金属结壳的成矿特征

根据我国大洋多金属结壳的调查资料并结合其他相关的研究结果，对中太平洋海山区多金属结壳的类型，产状，成分，结构，分布等成矿特征进行了初步的研究，结果表明，中太平洋海山区富钴结壳广泛发育，但成矿特征较大地受地形，水溶，基岩类型等成矿环境因素的影响与制约。     

Assessment of acoustic backscatter intensity surveying on deep-sea ferromanganese crust: Constraints from Weijia Guyot,western Pacific Ocean

Near-bottom observation data from the manned deep submersible Jiaolong with high-precision underwater positioning data from Weijia Guyot, Magellan Seamounts in the Western Pacific Ocean are reported. Three substrate types were identified: Sediment, ferromanganese crust, and ferromanganese crust with a thin cover of sediment. The ferromanganese crusts show clear zoning and their continuity is usually disturbed by sediments on areas of the mountainside with relatively gentle slope gradients. The identified substrate spatial distributions correspond to acoustic backscatter intensity data, with regions of high intensity always including crust development and regions of low intensity always having sediment. Therefore, acoustic backscatter intensity surveying appears useful in the delineation and evaluation of crust resources, although further more work is needed to develop a practicable methodology.     

Distribution Characteristics of Cobalt-rich Ferromanganese Crust Resources on Submarine Seamounts in the Western Pacific

Based on the survey data of five submarine seamount provinces （chains） in the Western Pacific, the distribution characteristics of cobalt-rich ferromanganese crust resources have been researched in this paper by using the relative reference data and applying the theories of hotspot and seafloor spreading. The main research results obtained are as follows： The Co-rich crust thickness in the study area is gradually increasing from east to west and from south to north having a negative correlation （r = -0.59） with longitude and a positive correlation （r = 0.48） with latitude. The crust thickness varying along longitude and latitude is influenced by the hotspot and seafloor spreading. The oceanic crusts and seamounts in the northwest part of the study area are older, and the crust resources are superior to those in the southeast part. In the depth of 〈1500 m, 1500-2000 m, 2000-2500 m in the study area, the cobalt crust thickness is respectively 5.45 cm, 4.34 cm and 3.55 cm, and in the depth of 2500-3000 m and 3000-3500 m, it drops respectively to 2.84 cm and 3.37 cm. The Co-rich crust resources are mainly concentrated in the seamount summit margins and the upper flanks in the depth of 〈2500 m. There is a strong negative correlation （r = -0.67） between the cobalt crust abundance and the slope of the seamount, 75 kg/m^2 and 50 kg/mz at the slopes of 0°-20° and 20°-34° respectively. Cobalt crusts are mainly distributed in the parts whose slopes are less than 20°. It is consistent with the fractal result that the slope threshold of cobalt crust distribution is 19°, and slopes over 20° are not conducive to the crust growth. The cobalt crusts of high grade are mainly enriched in the region within 150°E-140°W and 30°S-30°N in the Pacific, where there are about 587 seamounts at the depth of 3500- 6000 m and over 30 Ma of the oceanic crusts. The perspective area rich in cobalt crust resources is about 41×104 km^2 and the resource quantity is approximately 27 billion tons.     

厚结壳的形成条件及控制因素分析

当前对于大洋厚结壳的研究较少,而厚结壳是未来开发利用的重点,同时它记录的地质历史长,控制和影响结壳生长发育的各种因素必然能在厚结壳上充分体现出来。因此,开展厚结壳的形成条件及控制因素的研究,具有重要的理论与现实意义。文章利用GIS空间分析技术与地质统计方法,对厚结壳的定义、结壳厚度与水深、结壳厚度与基岩、结壳生长与构造活动、结壳厚度与沉积速率、结壳厚度与经纬度、结壳厚度与主成矿元素之间的关系进行了分析,结果表明,结壳的厚度变化受控于水深、基岩、构造活动、沉积速率、经纬度等因素,同时结壳厚度与主成矿元素之间存在明显的相关性。     

An integrated method for the quantitative evaluation of mineral resources of cobalt-rich crusts on seamounts

Cobalt-rich crusts on seamounts potentially have the economic value of multiple metals. In the field of exploration, it is important to perform quantitative evaluations of mineral resources and delineate promising areas in survey regions for future mining. Accordingly, this study, based on prior knowledge, develops an integrated method to quantitatively evaluate mineral resources of cobalt-rich crusts on seamounts and gives an application example to demonstrate this method. The method includes four steps: first, defining units with certain areas and shapes on the target seamount (a 20 km² square block in the application example) and estimating characteristic values of the cobalt-rich crust for each unit with known geological survey data using a space interpolation method such as Kriging; second, presenting several model algorithms, i.e. Regional Coverage of Crusts, Suitable Slope Percentage for Mining and Fitting Area on Slopes, to extract the corresponding regional metallogenic factors for each unit by inputting regional surveying data (such as bathymetry data) into these models; third, considering both the features and regional metallogenic factors of cobalt-rich crusts in each unit to estimate their distribution of mineral resources on the entire seamount; and last, according to the distribution of the mineral resources and international social and economic requirements (such as the regulations of the International Seabed Authority), delineating a promising area for future mining.     

富钴结壳中贵金属元素的特征

对太平洋CL、CM海山调查时获取9个富钴结壳样品,采用化学处理及ICP-MS法进行分析。对贵金属元素含量分布特征、富集因子、标准化模式以及来源进行探讨和研究。结果表明：海山结壳中贵金属元素Ag、Au、Ru、Rh、Pd、Pt等的平均含量分别为： 1.05×10^-6、2.3×10^-6、15.6×10^-9、22.3×10^-9、2.39×10^-9和432×10^-9。与结核、洋壳及陆地矿石的Pd/（Pt+Pd）、Pt/（Pt+Pd）和Pd/Pt等贵金属元素的比值相比,大洋富钴结壳的 Pd/（Pt+Pd） 比值最低,为0.006;其次是结核,为0.06;洋壳为0.08;陆地矿石的Pd/（Pt+Pd）比值较大,为0.35～0.65。结壳的Pt/（Pt+Pd）比值最高,为0.99;其次是结核,为0.95;洋壳为0.93;陆地矿石的Pt/（Pt+Pd）比值相对较低,为0.33～0.65。统计分析显示了不同区域、不同环境中贵金属元素的特征参数变化,并且说明富钴结壳中富铂、金、钌、铑,而贫钯。贵金属元素标准化显示,海山富钴结壳均存在着Pt、Au正异常和Pd的负异常,其中Au异常幅度与结核的Au异常一致。     

Noble Gas Isotopic Compositions of Cobalt-rich Ferromanganese Crusts from the Western Pacific Ocean and Their Geological Implications

1 Introduction Submarine metallic mineral resources consist mainly of polymetallic nodules and cobalt-rich ferromanganese crusts. Despite being discovered much later than the former, the latter are becoming one of the most important submarine polymetallic ore resources, because they containmany valuable metallic elements such as Co, platinum group elements (PGE), rare earth elements (REE), Ni and Cu, besides high contents of Fe and Mn (He et al., 2001). The Co-rich crusts are widely distr…