Application of the BCR sequential extraction scheme to dredged pond sediments contaminated by Pb–Zn mining: A combined geochemical and mineralogical approach

The modified BCR sequential extraction procedure [Rauret, G., López-Sanchez, J., Sauquillo, A., Rubio, R., Davidson, C., Ure, A., Quevauviller, Ph., 1999. Improvement of the BCR three step sequential extraction procedure prior to certification of new soil and sediment reference materials. J. Environ. Monit. 1, 57–60.] was applied to 4 sediments from a mine tailing pond in La Calamine (East-Belgium). The results showed a very different behaviour of different samples towards the same extraction scheme. In samples with an elevated acid neutralizing capacity, a significant increase in the pH of the extracts was measured after the first two extraction steps. Other artefacts, such as readsorption of metals and precipitation could be deduced by comparing X-ray diffraction patterns after different extraction steps. For example, anglesite was effectively dissolved during the acid extraction step (step 1) but relatively low Pb concentrations were measured in the CH₃COOH extract because of the readsorption of Pb. Mineralogical analysis of the sediments after each extraction step also indicated the incomplete oxidation of sulphides by H₂O₂. Besides a mineralogical analysis, the monitoring of the pH of the extracts and the analysis of major elements (Fe, Ca, Al, Mn) can be helpful for the interpretation of the results of the sequential extraction.The combination of sequential extractions with mineralogical sample investigation provided information on the reactivity and solubility of minerals in the samples. This improved the interpretation, at least within the detection limits of the mineralogical analysis applied. Besides the improved interpretation of the results of the sequential extractions for sediments in which minerals are identified, the information concerning the reactivity of minerals is an important tool to evaluate the risk associated with contaminated sediments.     

Characteristics of distribution and chemical speciation of heavy metals in environmental mediums around Jinchang mining city,Northwest China

Heavy metal contamination was the main environmental problem around the Jinchang Ni–Cu mine area of Gansu, Northwest China. The concentration of heavy metals (Cr, Cu, Ni, Pb, and Zn) in various environmental mediums around the Jinchang Ni–Cu mine area were analyzed using atomic absorption spectrometry (AAS). The different chemical speciation of heavy metals was extracted using BCR (European Community Bureau of Reference) sequential extraction procedure, and the concentration of chemical speciation of each heavy metal was measured by inductively coupled plasma-atomic emission spectrometry. The results showed that Cu and Ni were the most important heavy metal pollutants in various mediums including cultivated soils, dust on slagheap surfaces, tailings, and sediments in waste water drains. In the tailings and sediments, the concentrations of Ni were obviously higher than those of Cu, whereas, in the soil and dust, the concentrations of Cu were higher than those of Ni. Analysis of chemical speciation indicated that Cr and Zn were mainly in residual fraction; Cu was mainly in oxidizable fraction; Ni was mainly in reducible fraction and acid soluble fraction; and Pb was mainly in reducible fraction and residual fraction. The extent of contamination of various environmental mediums was different because the heavy metals were derived from different sources. Furthermore, the mobility of various heavy metals was different because of the different distribution of chemical speciation.     

Sequential extraction and leaching characteristics of heavy metals in abandoned tungsten mine tailings sediments

The chemical speciation of potentially toxic elements (As, Cd, Cu, Pb, and Zn) in the contaminated soils and sulfides-rich tailings sediments of an abandoned tungsten mine in Korea was evaluated by conducting modified BCR sequential extraction tests. Kinetic and static batch leaching tests were also conducted to evaluate the potential release of As and other heavy metals by acidic rain water and the leaching behaviors of these heavy metals. The major sources of the elements were As-, Zn- and Pb-bearing sulfides, Pb carbonates (i.e., cerussite), and Pb sulfates (i.e., anglesite). The biggest pollutant fraction in these soil and tailing samples consists of metals bound to the oxidizable host phase, which can be released into the environment if conditions become oxidative, and/or to residual fractions. No significant difference in total element concentrations was observed between the tailings sediments and contaminated soils. For both sample types, almost no changes occurred in the mobility of As and the other heavy metals at 7 days, but the mobility increased afterwards until the end of the tests at 30 days, regardless of the initial pH. However, the mobility was approximately 5–10 times higher at initial pH 1.0 than at initial pHs of 3.0 and 5.0. The leached amounts of all the heavy metal contents were higher from tailings sediments than from contaminated soils at pH > 3.0, but were lower at pH < 3.0 except for As. Results of this study suggest that further dissolution of heavy metals from soil and tailing samples may occur during extended rainfall, resulting in a serious threat to surface and groundwater in the mine area.     

Mineralogy and trace element relative solubility patterns of shallow marine sediments affected by submarine tailings disposal and artisanal gold mining,Buyat-Ratototok district,North Sulawesi,Indonesia

Shallow marine sediments of the Buyat-Ratototok district of North Sulawesi, Indonesia, are affected by submarine disposal of industrial gold mine tailings and small-scale gold mining using mercury amalgamation. Industrial mine tailings contained 590–660 ppm arsenic, 490–580 ppm antimony, and 0.8–5.8 ppm mercury. Electron microprobe survey found both colloidal iron–arsenic-phases without sulphur and arsenian pyrite in tailings and sites to which tailings had dispersed, but only arsenopyrite in sediments affected by artisanal mining. Antimony in tailings was present as antimony oxides, colloidal iron–antimony phases, colloidal iron–antimony phases, and stibnite in sediments affected by both types of mining. A sequential extraction found that 2% of arsenic held in tailings and tailings-contaminated sediments was exchangeable, 20–30% was labile, including weakly adsorbed, carbonate- and arsenate bound, 20–30% was metastable, probably incorporated into iron or manganese oxyhydroxides, or strongly adsorbed to silicate minerals, and 40–48% was relatively insoluble, probably incorporated into sulphides or silicates. Arsenic in sediments affected by artisanal gold mining was 75–95% relatively insoluble. Antimony in all sediments was >90% relatively insoluble. Relative solubility patterns of most other metals did not differ between industrial tailings-affected, artisanal-mining affected areas, and fluvial sediments. Results suggest that submarine tailings disposal is not suitable for refractory Carlin-like gold deposits because ore processing converts arsenic to forms unstable in anoxic marine sediments. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Arsenic mobilization from mine tailings in the presence of a biosurfactant

Batch experiments were conducted to investigate As mobilization from mine tailings in the presence of a biosurfactant (JBR425, mixed rhamnolipids) and to evaluate the feasibility of using biosurfactant in remediating As contaminated mine tailings/soils. Introduction of the biosurfactant increased As mobilization greatly. When the mass ratio was 10 mg biosurfactant/g mine tailings at pH 11, As mobilization by the biosurfactant was greatest after 24 h, with a corresponding concentration ratio (the ratio of As mobilization by the biosurfactant to that by distilled water at same adjusted pH, wt/wt) of 21.6. Selective sequential extraction indicated that As was easily mobilized from the weakly bound and relatively more mobile fractions by washing with the biosurfactant. A mobilization isotherm was developed to predict As mobilization from the mine tailings in the presence of biosurfactant. It was shown that biosurfactant sorption to the mine tailings is essential for As mobilization. Arsenic mobilization was found to be positively correlated with the mobilization of Fe and other metals (i.e., Cu, Pb and Zn), which might further enhance As mobilization by helping incorporate it into soluble complexes or micelles. Capillary electrophoresis analyses indicated that As redox or methylation reactions had insignificant effect on As mobilization. Biosurfactants might be used potentially to remove bulk As from mine tailings or contaminated soils under alkaline conditions.     

Metal extractability in acidic and neutral mine tailings from the Cartagena-La Unión Mining District (SE Spain)

Mine tailings are ubiquitous in the landscapes of mined areas. Metal solubilities were compared in two chemically distinct mine tailings from the old Mining District of Cartagena-La Unión (SE Spain). One of the tailings was acidic (pH 3.0) with 5400 mg/kg Zn, 1900 mg/kg As and 7000 mg/kg Pb. The other was neutral (pH 7.4) with 9100 mg/kg Zn, 5200 mg/kg Pb and 350 mg/kg As. In samples from the acidic tailings, more than 15% of the Zn and 55% of the Cd were extractable with 0.1 M NaNO₃, and distilled water. In the neutral tailings, using the same reagents, less than 1% of the metals were extractable. A sequential extraction procedure revealed that the sum of the residual and the Fe oxide fractions of Cu, Zn and Pb comprised 80–95% in the acidic tailings and 70–90% in the neutral tailings. The acidic mine tailings had a higher metal solubility, resulting in more metal leaching in the short-term, but also a higher fraction of inert metal. In contrast, in the neutral tailings, the metals were evenly distributed between, oxides and the residual fraction. This implies lower metal mobility in the short-term, but that metal mobility may increase in the long-term. When applied to mine tailings, sequential extractions may provide misleading results because the strong cation exchange capacity of some extractants may induce pH changes and thereby significantly change metal solubility.     

Heavy metals pollution of aquatic ecosystems in the vicinity of a recently closed underground lead-zinc mine (Basque Country, Spain)

A presentation is made of the study of an underground polymetallic sulphide mine and the pollution caused by this in the adjoining aquatic ecosystems. Troya Mine is in the Basque Cantabrian region (northern Spain). The annual production of the ore deposit of over 3.7 million tons of Pb (0.9%), Zn (11.2%) and Cu (0.2%) was 300,000 t. It was open and producing from 1986-1993. The mineralization was made up of pyrite, marcasite, sphalerite, galena, chalcopyrite and arsenopyrite. Only the Zn and the Pb were mined. We studied the distribution and behaviour of the heavy metals Zn, Pb, Fe, Mn, Cu, Cr and Cd in the water column, dissolved and suspended fractions, and in the sediments of Estanda Stream and of Gezala Creek. Zn, Cd and Mn tend to be found in the water; Fe, Pb, Cu and Cr appear as an adsorbed fractionin the solid phases. Those of the second group are significantly linked to the fluvial sediments and present very high levels. The concentrations of the metals are conditioned by the waters from the mine galleries, by the leached waste, by the surface runoff, and by overflow from the spillway of the tailings pond. Our observations provide knowledge on the extent of the polluting power of the metals, the physico-chemical effects in play and the subsequent chances of recovering these highly affected environments.     

Mineralogical and geochemical behavior of mill tailing material produced from lead-zinc skarn mineralization,Hanover, Grant County,New Mexico,USA

Mineral extraction and processing, especially metal mining, produces crushed and milled waste; such material, exposed to weathering, poses the potential threat of environmental contamination. In this study, mill tailings from inactive Pb-Zn mines in New Mexico, southwest USA, have been examined for their potential environmental impacts by means of detailed mineralogical and geochemical characterization. The principal ore minerals remaining in the tailings material are sphalerite, chalcopyrite, and very minor galena, smithsonite, and cerrusite, accompanied by the gangue minerals pyrite, pyrrhotite, magnetite, hematite, garnet, pyroxene, quartz, and calcite. White precipitate occurring on tailings surfaces is composed of gypsum and hydrated magnesium sulfates. Pyrite is mostly unaltered or shows only micron-scale rims of oxidation (goethite/hematite) in some surface samples. This iron oxide rim on pyrite is the only indication of weathering-derived minerals found by microscopy. There are variations in element concentrations with depth that reflect primary variations through time as the tailings ponds were filled. Cadmium and Zn concentrations increase with depth and Ag and Pb are low for the uppermost core samples, while Cu, Ni, and Co concentrations are generally high for the uppermost core samples. These elemental distributions indicate that little or no leaching has taken place since emplacement of the tailings because no accumulation or enrichment of these metals is observed in Hanover tailings, even in reducing portions of tailings piles. Element concentrations of surface samples surrounding the tailings reflect underlying mineralized zones rather than tailings-derived soil contamination. We observed no successive decreasing metal concentrations in prevalent wind directions away from the tailings. Stream sediment samples from Hanover Creek have somewhat elevated Zn, Cd, and Pb concentrations in areas that receive sediments from erosion of the tailings. However, input from tributaries downstream of the ponds appears to be principal source of heavy metals in Hanover Creek. The results of this study indicate that there is low risk for groundwater heavy-metal contamination from Hanover tailings. Tailings material do not show significant geochemical oxidation/alteration or metal leaching with depth. Our studies indicate that neutralizing minerals present in the tailings are sufficient to keep the tailings material chemically stable. Geochemically, however, tailings materials are being eroded and may pose a threat to Hanover Creek via siltation.     

Environmental geochemistry of the derelict Webbs Consols mine,New South Wales,Australia

Small-scale mining and mineral processing at the Webbs Consols polymetallic PbZnAg deposit in northern New South Wales, Australia has caused a significant environmental impact on streams, soils and vegetation. Unconfined waste rock dumps and tailings dams are the source of the problems. The partly oxidised sulphidic mine wastes contain abundant sulphides (arsenopyrite, sphalerite, galena) and oxidation products (scorodite, anglesite, smectite, Fe-oxyhydroxides), and possess extreme As and Pb (wt% levels) and elevated Ag, Cd, Cu, Sb and Zn values. Contemporary sulphide oxidation, hardpan formation, crystallisation of mineral efflorescences and acid mine drainage generation occur within the waste repositories. Acid seepages (pH 1.9–6.0) from waste dumps, tailings dams and mine workings display extreme As, Pb and Zn and elevated Cd, Cu and Sb contents. Drainage from the area is by the strongly contaminated Webbs Consols Creek and although this stream joins and is diluted by the much larger Severn River, contamination of water and stream sediments in the latter is evident for 1–5 km, and 12 km respectively, downstream of the mine site. The pronounced contamination of local and regional soils and sediments, despite the relatively small scale of the former operation, is due to the high metal tenor of abandoned waste material and the scarcity of neutralising minerals. Any rehabilitation plan of the site should include the relocation of waste materials to higher ground and capping, with only partial neutralisation of the waste to pH 4–5 in order to limit potential dissolution of scorodite and mobilisation of As into seepages and stream waters.     

Geochemical characteristics of ores and surface waters for environmental risk assessment in the Pinpet iron deposit,southern Shan State,Myanmar

Mining operations in the Pinpet Fe deposit, which is the second‐largest Fe deposit in Myanmar, are currently suspended, in part because of possible contamination of heavy metals and hazardous elements (e.g., Fe, As, Cu, Zn, and U) into the surrounding aquatic environment and associated public concern. However, a scientific investigation of the source and degree of contamination in streams near the deposit has not yet been conducted. Therefore, we quantified heavy‐metal and hazardous‐element concentrations of stream waters and sediments in stream beds, and measured the speciation and concentration of these metals in deposit Fe ores using the sequential extraction method, to better understand the influence of mining activities on the surrounding environment. Geochemical results for Nan‐tank‐pauk stream and its tributaries indicate that the chemical compositions of their waters are controlled by carbonate bedrock and that no detectable contamination has occurred as a result of mining activity or hematite and limonite ore beneficiation processes in either the wet or dry seasons. All measured heavy‐metal and hazardous‐element concentrations were below the World Health Organization standards for drinking water and the proposed national drinking water quality standards in Myanmar. Bulk chemical compositions of stream‐bed and tailings dam sediments show that As, Zn, and Cu concentrations are similar to those in uncontaminated sediments. Results of bulk mineralogical and chemical analyses of ore samples reveal that some limonite ore samples contain substantial amounts of As (up to 2 wt%). However, sequential extraction results indicate that most (>90%) of the As in these As‐rich ores is hosted in insoluble fractions (e.g., crystalline Fe hydroxides and clays). Therefore, arsenic is unlikely to be released into the aquatic environment by interacting with water during ore beneficiation processes should the mine resume operations.     

改进BCR法在分析水系沉积物样品铅形态中的应用

研究了超声波水浴提 BCR顺序提取法在铅形态分析中的应用,优化了水系沉积物样品铅的各分步提取时间。与传统的BCR法相比,改进BCR法所用的提取时间由原来的几十小时缩短为几十分钟。氢化物 原子荧光法测定样品中3种形态铅含量的统计结果显示,改进BCR法分析精度好,各形态铅的提取效率高,是一种快速、定量铅形态分析方法。     

Acid production from sulfide minerals using hydrogen peroxide weathering

Sulfide mineral weathering is a major source of acid generation in mining environments. Oxidation and hydrolysis reactions in soil and geologic material under earth surface conditions causes weathering of reduced sulfide minerals resulting in liberation of weathering products including acid. Pyrite and marcasite are minerals common in mine environments that cause acid generation. Many other sulfide minerals are present in mining environments which may or may not form acid upon weathering. Characterization of complex mineral assemblages containing S compounds is therefore critically important to pre-mine planning and postmine waste characterization. Despite the importance of mineral weathering behavior, little is known about the acid generation characteristics of common sulfide and sulfate minerals. To assess the response of common sulfide and sulfate minerals to oxidizing conditions, 13 minerals were subjected to treatment with 10% H₂O₂. The resulting leachate was analyzed for pH, electrical conductivity, S and titratable acidity. The sulfide minerals arsenopyrite, pyrite, chalcopyrite, pyrrhotite, marcasite and sphalerite demonstrated significantly elevated levels of titratable acidity and are acid generating in contrast to galena, chalcocite and all the sulfates. The sulfate minerals barite, anhydrite, gypsum, anglesite and jarosite were included in experimentation and were found not to form acid under strongly oxidizing conditions. Remediation strategies for disturbed lands containing reduced S minerals must therefore consider not only the total quantity of sulfide minerals present, but the specific mineralogy of the S compounds.     

The behavior of arsenic and antimony at Pezinok mining site,southwestern part of the Slovak Republic

Arsenic and antimony contamination is found at the Pezinok mining site in the southwest of the Slovak Republic. Investigation of this site included sampling and analysis of water, mineralogical analyses, sequential extraction, in addition to flow and geochemical modeling. The highest dissolved arsenic concentrations correspond to mine tailings (up to 90,000 μg/L) and the arsenic is present predominately as As(V). The primary source of the arsenic is the dissolution of arsenopyrite. Concentration of antimony reaches 7,500 μg/L and its primary source is the dissolution of stibnite. Pore water in mine tailings is well-buffered by the dissolution of carbonates (pH values between 6.6 and 7.0) and arsenopyrite grains are surrounded by reaction rims composed of ferric iron minerals. Based on sequential extraction results, most solid phase arsenic is in the reducible fraction (i.e. ferric oxyhydroxides), sulfidic fraction, and residual fraction. Distribution of antimony in the solid phase is similar, but contents are lower. The principal attenuation mechanism for As(V) is adsorption to ferric oxide and hydroxides, but the adsorption seems to be limited by the competition with Sb(V) produced by the oxidation of stibnite for adsorption sites. Water in mine tailings is at equilibrium with gypsum and calcite, but far from equilibrium with any arsenic and antimony minerals. The concentrations of arsenic and antimony in the surrounding aquifer are much lower, with maximum values of 215 and 426 μg/L, respectively. Arsenic and antimony are transported by ground water flow towards the Blatina Creek, but their loading from ground water to the creek is much lower compared with the input from the mine adits. In the Blatina Creek, arsenic and antimony are attenuated by dilution and by adsorption on ferric iron minerals in stream sediments with resulting respective concentrations of 93 and 45 μg/L at the site boundary south of mine tailing ponds.     

矿山尾矿矿物学研究进展

矿山尾矿由于产生大量酸性排水和释放重金属，污染地下水和地表水，破坏生态环境而成为人们关注的焦点。尾矿引起的环境问题是地表条件下，水一气一矿物复杂反应的综合结果。近年来尾矿矿物学的研究已经揭示出尾矿中矿物分解和形成的规律，水一气一矿物反应的机制和影响因素，酸性排水和重金属迁移规律，为尾矿环境危险性评价和尾矿污染防治提供了基础资料和新的思路。     

Hydrogeochemistry and microbiology of mine drainage: An update

The extraction of mineral resources requires access through underground workings, or open pit operations, or through drillholes for solution mining. Additionally, mineral processing can generate large quantities of waste, including mill tailings, waste rock and refinery wastes, heap leach pads, and slag. Thus, through mining and mineral processing activities, large surface areas of sulfide minerals can be exposed to oxygen, water, and microbes, resulting in accelerated oxidation of sulfide and other minerals and the potential for the generation of low-quality drainage. The oxidation of sulfide minerals in mine wastes is accelerated by microbial catalysis of the oxidation of aqueous ferrous iron and sulfide. These reactions, particularly when combined with evaporation, can lead to extremely acidic drainage and very high concentrations of dissolved constituents. Although acid mine drainage is the most prevalent and damaging environmental concern associated with mining activities, generation of saline, basic and neutral drainage containing elevated concentrations of dissolved metals, non-metals, and metalloids has recently been recognized as a potential environmental concern. Acid neutralization reactions through the dissolution of carbonate, hydroxide, and silicate minerals and formation of secondary aluminum and ferric hydroxide phases can moderate the effects of acid generation and enhance the formation of secondary hydrated iron and aluminum minerals which may lessen the concentration of dissolved metals. Numerical models provide powerful tools for assessing impacts of these reactions on water quality.     

Transport and sediment–water partitioning of trace metals in acid mine drainage: an example from the abandoned Kwangyang Au–Ag mine area, South Korea

Transport and sediment–water partitioning of trace metals (Cr, Co, Fe, Pb, Cu, Ni, Zn, Cd) in acid mine drainage were studied in two creeks in the Kwangyang Au–Ag mine area, southern part of Korea. Chemical analysis of stream waters and the weak acid (0.1 N HCl) extraction, strong acid (HF–HNO₃–HClO₄) extraction, and sequential extraction of stream sediments were performed. Heavy metal pollution of sediments was higher in Chonam-ri creek than in Sagok-ri creek, because there is a larger source of base metal sulfides in the ores and waste dump upstream of Chonam-ri creek. The sediment–water distribution coefficients (K _d) for metals in both creeks were dependent on the water pH and decreased in the order Pb ≈ Al > Cu > Mn > Zn > Co > Ni ≈ Cd. K _d values for Al, Cu and Zn were very sensitive to changes in pH. The results of sequential extraction indicated that among non-residual fractions, Fe–Mn oxides are most important for retaining trace metals in the sediments. Therefore, the precipitation of Fe(–Mn) oxides due to pH increase in downstream sites plays an important role in regulating the concentrations of dissolved trace metals in both creeks. For Al, Co, Cu, Mn, Pb and Zn, the metal concentrations determined by 0.1 N HCl extraction (Korean Standard Method for Soil Pollution) were almost identical to the cumulative concentrations determined for the first three weakly-bound fractions (exchangeable + bound to carbonates + bound to Fe–Mn oxides) in the sequential extraction procedure. This suggests that 0.1 N HCl extraction can be effectively used to assess the environmentally available and/or bioavailable forms of trace metals in natural stream sediments.     

土壤和沉积物中元素的化学形态及其顺序提取法

介绍了形态分析的概念和化学形态分析方法，探讨了广泛应用于土壤、沉积物重金属形态分析中的Tessier和BCR顺序提取方案及其异同，综述了顺序提取方法在地球化学、环境科学、农业科学等方面的应用及中国相关标准物质的研制现状。     

铜陵矿山酸性排水及固体废弃物中的重金属元素

在调查中国铜陵凤凰山铜矿和新桥硫铁矿两种不同类型矿山固体废弃物特征的基础上,研究了矿山尾矿和废石产生酸性排水的可能性及其差异以及矿山固体废弃物中重金属元素的赋存形式。结果表明,凤凰山铜矿的尾矿基本不产生矿山酸性排水,而新桥硫铁矿采矿废石产生矿山酸性排水,并且凤凰山铜矿的尾矿和新桥硫铁矿采矿废石中重金属元素的赋存形式也有差异,前者重金属Cu、Pb、Zn、Cd、As、Hg主要赋存于硅酸盐态中,而后者在还原态中有较高的含量,这反映了在地表条件下尾矿中大量重金属元素已经发生了迁移,而采矿废石已经开始氧化,且酸性排水的存在更有利于废石中重金属元素的迁移和扩散,进而导致矿区周围环境的污染。     

Behavior of heavy metals in sulfide mine tailings and bottom sediment (Salair,Kemerovo region,Russia)

The given work focused on solving the problem of environmental geochemistry related to investigation of element speciation, their mobility, and migration in polluted areas. The purpose was to describe quantitatively migration, distribution, and redistribution of heavy metals by the example of the old tailings (Talmovaya sands) of the Lead Zinc Concentration Plant (Salair, Kemerovo region, Russia) and technogenic bottom sediments of the Malaya Talmovaya river. Contents of elements in the sulfide tailings range in the following limits: Zn: 1,100–27,000 ppm, Cd: 1.3–240 ppm, Pb: 0.01–0.81 ppm, Cu: 220–960 ppm, As: 15–970 ppm, Fe: 19,000–76,000 ppm, and Ba: 80,000–1,00,000 ppm. Element concentrations in the river sediment are proportional to the element contents in the sulfide tailings. Element speciations in the sulfide tailings and technogenic bottom sediments were investigated by the modified sequential extraction procedure. Chemical forms of heavy metals in pore water and surface water were calculated by WATEQ4F software. Principles of heavy metal migration in the sulfide tailings and technogenic bottom deposits were established. The obtained results about element species in the sulfide tailings and sediment explain the main principles of element migration and redeposition. In the mine waste and technogenic bottom deposits, there is vertical substance transformation with formation of geochemical barriers.     

缓冲期碳酸盐型尾矿重金属释放机制——柱淋滤实验研究

碳酸盐型尾矿在缓冲期/中性矿山废水(NMD)释放期的重金属污染问题易被忽视。本文以广西大厂锡石-硫化物尾矿作为研究对象,采用柱淋滤实验方法,探讨碳酸盐型尾矿在缓冲期重金属的释放机制,为此类型尾矿重金属污染的防治提供依据。实验结果表明,大厂尾矿在缓冲期(约7年,pH值为6. 6～8. 0)存在Sb、Zn、Cd、As(Pb)释放污染问题。在尾矿堆放初期(0. 5年,pH值由7. 6降至7. 2),Zn、Sb、Cd快速、大量释出;中期(0. 5～2. 5年,pH值由7. 2波动升高至8. 0),Sb较平稳释出;后期(2. 5～7年,pH值变化范围为8. 0～6. 6,呈降低趋势),受气温及pH值影响,As、Sb(Pb)呈波动或间歇振荡释出,即在夏季高温、pH值较高时,释出元素浓度较高,反之,在冬季低温、pH值较低时,释出元素浓度较低。重金属的释放与尾矿中硫化物的氧化程度高低及氧化先后顺序有关。这些矿物的氧化顺序大致为:闪锌矿(Zn、Cd)、辉锑锡铅矿(Sb)→脆硫锑铅矿(Sb)→毒砂(As)、方铅矿(Pb)。因此,对于(广西大厂)碳酸盐型尾矿在缓冲期的重金属污染应分阶段、季节(夏季),采取有针对性的防治措施;在缓冲期(7年)后应注意尾矿酸性矿山废水(AMD)+重金属(如As、Sb)复合污染的防治。