Analysis of the Wenchuan Ms8.0 Earthquake’s Co-seismic Stress and Displacement Change by Using the Finite Element Method

The variation of in situ stress before and after earthquakes is an issue studied by geologists. In this paper, on the basis of the fault slip dislocation model of Wenchuan Ms8.0 earthquake, the changes of co-seismic displacement and the distribution functions of stress tensor around the Longmen Shan fault zone are calculated. The results show that the co-seismic maximum surface displacement is 4.9 m in the horizontal direction and 6.5 m in the vertical direction, which is almost consistent with the on-site survey and GPS observations. The co-seismic maximum horizontal stress in the hanging wall and footwall decreased sharply as the distance from the Longmen Shan fault zone increased. However, the vertical stress and minimum horizontal stress increased in the footwall and in some areas of the hanging wall. The study of the co-seismic displacement and stress was mainly focused on the long and narrow region along the Longmen Shan fault zone, which coincides with the distribution of the earthquake aftershocks. Therefore, the co-seismic stress only affects the aftershocks, and does not affect distant faults and seismic activities. The results are almost consistent with in situ stress measurements at the two sites before and after Wenchuan Ms8.0 earthquake. Along the fault plane, the co-seismic shear stress in the dip direction is larger than that in the strike direction, which indicates that the faulting mechanism of the Longmen Shan fault zone is a dominant thrust with minor strike-slipping. The results can be used as a reference value for future studies of earthquake mechanisms.     

The Relationship between Fe Mineralization and Magnetic Basement Faults using Multifractal Modeling in the Esfordi and Behabad Areas (BMD), Central Iran

Multifractal modeling is a mathematical method for the separation of a high potential mineralized background from a non-mineralized background. The Concentration-Distance to Fault structures (C-DF) fractal model and the distribution of the known iron (Fe) deposits/mines seen in the Esfordi and Behabad 1:100,000 sheets from the Bafq region of central Iran are used to distinguish Fe mineralization based on their distance to magnetic basement structures and surface faults, separately, using airborne geophysical data and field surveys. Application of the C-DF fractal model for the classification of Fe mineralizations in the Esfordi and Behabad areas reveals that the main ones show a correlation with their distance from magnetic basement structures. Accordingly, the distances of Fe mineralizations with grades of Fe higher than 55% )43% < Fe ≤ 60%) are located at a distance of less than 1 km, whereas for surfacial faults with grades of 43% ≤ Fe ≤ 60%, the distances are 3162< DF ≤ 4365 m from the faults. Thus, there is a positive relationship between Fe mineralization and magnetic basement structures. Also, the proximity evidence of Precambrian high-grade Fe mineralization related to magnetic basement structures indicates syn-rifting tectonic events. Finally, this C-DF fractal model can be used for exploration of magmatic and hydrothermal ore deposits.     

Regional Stress Fields under Tibet from 3D Global Flow Simulation

Tibetan area is the most active continental collision zone on earth.Several major earth-quakes occurred around the boundaries of Tibetan plateau and caused massive damages and casualties.The dynamics of this area is not well understood due to the complex structure of Tibet and its sur-rounding area.In this study,a 3D global flow simulation with only viscous rheology is applied to studying the stress distribution in this area,and the interaction between Tibet and its surrounding areas is investigated.Finally...     

Nonlinear regression model for peak-failure strength of rockfill materials in general stress space

A nonlinear regression model for peak-failure strength prediction of rockfill materials is proposed. It is based on the relationship between the peak-failure stress ratio and the normalized confining pressure as well as the relationship between the normalized peak-failure stress ratio and the exponent function of the intermediate principal stress ratio. This model can well predict the variations of the peak-failure stress ratio with the initial confining pressure and the intermediate principal stress ratio for different rockfill materials under different general stress paths. Comparisons of the measured and predicted results show that the peak-failure strength under the constant-p' and constant-b path is larger than that under the constant-σ'_3 and constant-b path. The predictive capacity of the proposed model for the peakfailure stress ratio is better than that for the peak-failure friction angle.     

Preliminary Results of In‐situ Stress Measurements along the Longmenshan Fault Zone after the Wenchuan Ms 8.0 Earthquake

Abstract: Four months after the Wenchuan Ms 8 earthquake in western Sichuan, China, in situ stress measurements were carried out along the Longmenshan fault zone with the purpose of obtaining stress parameters for earthquake hazard assessment. In-situ stresses were measured in three new boreholes by using overcoring with the piezomagnetic stress gauges for shallow depths and hydraulic fracturing for lower depths. The maximum horizontal stress in shallow depths (~20 m) is about 4.3 MPa, oriented N19°E, in the epicenter area at Yingxiu Town, about 9.7 MPa, oriented N51°W, at Baoxing County in the southwestern Longmenshan range, and about 2.6 MPa, oriented N39°E, near Kangding in the southernmost zone of the Longmenshan range. Hydraulic fracturing at borehole depths from 100 to 400 m shows a tendency towards increasing stress with depth. A comparison with the results measured before the Wenchuan earthquake along the Longmenshan zone and in the Tibetan Plateau demonstrates that the stress level remains relatively high in the southwestern segment of the Longmenshan range, and is still moderate in the epicenter zone. These results provide a key appraisal for future assessment of earthquake hazards of the Longmenshan fault zone and the aftershock occurrences of the Wenchuan earthquake.     

Tectonic Stress State Changes Before and After the Wenchuan Ms 8.0 Earthquake in the Eastern Margin of the Tibetan Plateau

Crustal tectonic activities are essentially the consequences of the accumulation and release of in situ stress. Therefore, studying the stress state near active faults is important for understanding crustal dynamics and earthquake occurrences. In this paper, using in situ stress measurement results obtained by hydraulic fracturing in the vicinity of the Longmenshan fault zone before and after the Wenchuan Ms 8.0 earthquake and finite element modeling, the variation of stress state before and after the Wenchuan Ms 8.0 earthquake is investigated. The results show that the shear stress, which is proportional to the difference between principal stresses, increases with depth and distance from the active fault in the calm period or after the earthquakes, and tends to approach to the regional stress level outside the zone influenced by the fault. This distribution appears to gradually reverse with time and the change of fault properties such as frictional strength. With an increase in friction coefficient, low stress areas are reduced and areas with increased stress accumulation are more obvious near the fault. In sections of the fault with high frictional strengths, in situ stress clearly increases in the fault. Stress accumulates more rapidly in the fault zone relative to the surrounding areas, eventually leading to a stress field that peaks at the fault zone. Such a reversal in the stress field between the fault zone and surrounding areas in the magnitude of the stress field is a potential indicator for the occurrence of strong earthquakes.     

Stress Distribution in the Upper Shihezi Formation from 1D Mechanical Earth Model and 3D Heterogeneous Geomechanical Model,Linxing Region,Eastern Ordos Basin,Central China

The Upper Shihezi sedimentary rocks in the Linxing region has been estimated with a significant volume of tight sandstone gas.However,lateral distribution of the present-day stress magnitude is poorly understood,which limits further gas production.Hence,a one-dimensional mechanical earth model and a three-dimensional heterogeneous geomechanical model are built to address this issue.The results indicate that the strike-slip stress regime is dominant in the Upper Shihezi Formation.Relatively low stresses are mainly located around wells L-60,L-22,L-40,L-90,etc,and stress distributions exhibit the similarity in the Members H2 and H4.The differential stresses are relatively low in the Upper Shihezi Formation,suggesting that complex hydraulic fracture networks may be produced.Natural fractures in the Upper Shihezi Formation contribute little to the overall gas production in the Linxing region.In addition,the minimum principal stress gradient increases with Young’s modulus,suggesting that the stiffer rocks commonly convey higher stress magnitudes.There is a strong interplay between stress distribution and heterogeneity in rock mechanics.Overall,the relative error between the predicted and measured results is less than 10%,implying that the predicted stress distribution is reliable and can be used for subsequent analysis in the Linxing region.     

In Situ Stress Measurements in the Lhasa Terrane, Tibetan Plateau, China

Tectonic activities are frequent in the Lhasa terrane because of the ongoing collision between the India and Eurasia plates. Knowledge of the stress state is critical to evaluate the crustal stability and the design of underground excavations. Because of the limitations imposed by natural conditions,little research has been performed on the present crustal in situ stress in the Tibetan Plateau,and further study is imperative. In this study,hydraulic fracturing measurements were conducted in Nyching County(LZX) and Lang County(LX),Lhasa terrane to characterize the shallow crustal stress state. The results indicate that the stress state in the LZX borehole is markedly different from that in the LX borehole,in both magnitude and orientation. At the same measurement depths,the magnitudes of horizontal principal stresses in the LX borehole are 1.5–3.0 times larger than those in the LZX borehole. The stress regime in the LX borehole favors reverse faulting characterized by SHShSv,where SH,Sh,and Sv are maximum horizontal,minimum horizontal,and vertical principal stresses,respectively. The SH and Sh values are approximately three and two times greater than Sv. Fracture impression results reveal that SH in the LX borehole are predominantly N–S,while in the LZX borehole the maximum horizontal principal stress is mainly in the NNE-direction. The heterogeneity of the regional stress state might be a result of the population and distribution of local structures and seismic activities. The stress state in the LX borehole has exceeded the critical state of failure equilibrium,and there is an optimally orientated pre-existing fault near the borehole. It can be concluded that the optimally orientated fault is likely to be active when the stress has built up sufficiently to destroy the frictional equilibrium; it is suggested that research focus should be placed on this in future. The stress states in boreholes LZX and LX indicate uniformity of the regional stress field and diversity of the local stress fields resulting from the interactions among regional dynamic forces,tectonic stress field,and geological structures.     

Arsenic Distribution Pattern in Different Sources of Drinking Water and their Geological Background in Guanzhong Basin,Shaanxi, China

To study arsenic(As) content and distribution patterns as well as the genesis of different kinds of water, especially the different sources of drinking water in Guanzhong Basin, Shaanxi province, China, 139 water samples were collected at 62 sampling points from wells of different depths, from hot springs, and rivers. The As content of these samples was measured by the intermittent flowhydride generation atomic fluorescence spectrometry method(HG-AFS). The As concentrations in the drinking water in Guanzhong Basin vary greatly(0.00–68.08 μg/L), and the As concentration of groundwater in southern Guanzhong Basin is different from that in the northern Guanzhong Basin. Even within the same location in southern Guanzhong Basin, the As concentrations at different depths vary greatly. As concentration of groundwater from the shallow wells(50 m deep, 0.56–3.87 μg/L) is much lower than from deep wells(110–360 m deep, 19.34–62.91 μg/L), whereas As concentration in water of any depth in northern Guanzhong Basin is 10 μg/L. Southern Guanzhong Basin is a newly discovered high-As groundwater area in China. The high-As groundwater is mainly distributed in areas between the Qinling Mountains and Weihe River; it has only been found at depths ranging from 110 to 360 m in confined aquifers, which store water in the Lishi and Wucheng Loess(Lower and Middle Pleistocene) in the southern Guanzhong Basin. As concentration of hot spring water is 6.47–11.94 μg/L; that of geothermal water between 1000 and 1500 m deep is 43.68–68.08 μg/L. The high-As well water at depths from 110 to 360 m in southern Guanzhong Basin has a very low fluorine(F) value, which is generally 0.10 mg/L. Otherwise, the hot springs of Lintong and Tangyu and the geothermal water in southern Guanzhong Basin have very high F values(8.07–14.96 mg/L). The results indicate that highAs groundwater in depths from 110 to 360 m is unlikely to have a direct relationship with the geothermal water in the same area. As concentration of all reservoirs and rivers(both contaminated and uncontaminated) in the Guanzhong Basin is 10 μg/L. This shows that pollution in the surface water is not the source of the high-As in the southern Guanzhong Basin. The partition boundaries of the high- and low-As groundwater area corresponds to the partition boundaries of the tectonic units in the Guanzhong Basin. This probably indicates that the high-As groundwater areas can be correlated to their geological underpinning and structural framework. In southern Guanzhong Basin, the main sources of drinking water for villages and small towns today are wells between 110–360 m deep. All of their As contents exceed the limit of the Chinese National Standard and the International Standard(10 μg/L) and so local residents should use other sources of clean water that are 50 m deep, instead of deep groundwater(110 to 360 m) for their drinking water supply.     

Dynamic Field Division of Hydrocarbon Migration,Accumulation and Hydrocarbon Enrichment Rules in Sedimentary Basins

Hydrocarbon distribution rules in the deep and shallow parts of sedimentary basins are considerably different, particularly in the following four aspects. First, the critical porosity for hydrocarbon migration is much lower in the deep parts of basins: at a depth of 7000 m, hydrocarbons can accumulate only in rocks with porosity less than 5%. However, in the shallow parts of basins (i.e., depths of around 1000 m), hydrocarbon can accumulate in rocks only when porosity is over 20%. Second, hydrocarbon reservoirs tend to exhibit negative pressures after hydrocarbon accumulation at depth, with a pressure coefficient less than 0.7. However, hydrocarbon reservoirs at shallow depths tend to exhibit high pressure after hydrocarbon accumulation. Third, deep reservoirs tend to exhibit characteristics of oil (–gas)–water inversion, indicating that the oil (gas) accumulated under the water. However, the oil (gas) tends to accumulate over water in shallow reservoirs. Fourth, continuous unconventional tight hydrocarbon reservoirs are distributed widely in deep reservoirs, where the buoyancy force is not the primary dynamic force and the caprock is not involved during the process of hydrocarbon accumulation. Conversely, the majority of hydrocarbons in shallow regions accumulate in traps with complex structures. The results of this study indicate that two dynamic boundary conditions are primarily responsible for the above phenomena: a lower limit to the buoyancy force and the lower limit of hydrocarbon accumulation overall, corresponding to about 10%–12% porosity and irreducible water saturation of 100%, respectively.     

The origin and geological significance of lunar ridges

Lunar ridges are a kind of familiar linear structures developed on the lunar surface. The distribution pattern, formation mechanism and research significance of lunar ridges are discussed in this paper. Single lunar ridges are usually distributed in the form of broken lineation, and, as whole, lunar ridges are trapezoidal or annular in shape around the maria. As to the formation mechanism, only volcanism or tectonism was emphasized in the past, but the two processes are seldom taken into combined consideration. On the basis of detailed analyses, the authors thought that tectonism is a prerequisite for the formation of lunar ridges, while volcanism is the key factor controlling their particular shapes. Finally, the authors pointed out that it is very significant in the study of lunar ridges to link the course of lunar structure evolution with the stress state in the lunar crust.     

http://www.sciencedirect.com/science/article/pii/S1674987111001307

South China Sea(SCS) is the largest Western Pacific marginal sea.However,microbial studies have never been performed in the cold seep sediments in the SCS.In 2004."SONNE" 177 cruise found two cold seep areas with different water depth in the northern SCS.Haiyang 4 area,where the water depth is around 3000 m.has already been confirmed for active seeping on the seafloor.such as microbial mats,authigenic carbonate crusts and bivalves.We investigated microbial abundance and diversity in a 5.55-111 sediment core collected from this cold seep area.An integrated approach was employed including geochemistry and 16S rRNA gene phylogenetic analyses.Here,we show that microbial abundance and diversity along with geochemistry profiles of the sediment core revealed a coupled reaction between sulphate reduction and methane oxidation.Acridine orange direct count results showed that microbial abundance ranges from 10~5 to 10~6 cells/g sediment(wet weight).The depth-related variation of the abundance showed the same trend as the methane concentration profile.Phylogenetic analysis indicated the presence of sulphate-reducing bacteria and anaerobic methane-oxidizing archaea.The diversity was much higher at the surface,but decreased sharply with depth in response to changes in the geochemical conditions of the sediments,such as methane,sulphate concentration and total organic carbon.Marine Benthic Group B.Chloroflexi and JSl were predominant phylotypes of the archaeal and bacterial libraries,respectively.     

Effects of Pb^2＋, Cd^2＋ and Cu^2＋ on the Aqueous Zn^2＋ Sorption by Hydroxyapatite

In this paper, the behaviors of aqueous zinc sorption by hydroxyapatite in the co-existence of Pb^2＋, Cd^2＋ and Cu^2＋ are investigated, the effects of Pb^2＋, Cd^2＋ and Cu^2＋ on the sorption of Zn^2＋ are discussed, and the hydroxyapatite sorption capabilities for Pb^2＋, Cd^2＋, Cu^2＋ and Zn^2＋ are compared. The experimental results show that the Zn^2＋ removal efficiency decreases gradually with the increase of the Cd^2＋ concentration of the solution, and there is no sorption preference between Cd^2＋ and Zn^2＋. On the other hand, the Zn^2＋ removal efficiency rapidly decreases rapidly with the increase of the Cu^2＋ concentration of the solution, and there is a clear sorption preference between Cu^2＋ and Zn^2＋. It is noticed that the Zn^2＋ removal efficiency is hardly changed with the variance of Pb^2＋ concentration because the removal mechanisms for these two ions are totally different. It is concluded that the adsorption affinities of the heavy metals for the hydroxyapatite follows this sequence： pb^2＋〉 Cu^2＋〉 Cd^2＋〉 Zn^2＋.     

Environmental impacts of the abandoned mercury mine in Podljubelj, Slovenia

The Podljubelj mercury mine lies in the NW part of Slovenia. The ore is of hydrothermal-vein type. The ore deposit was exploited between the years 1557 and 1902. Total production of the mine was 110000 tons of ore （360 tons of Hg）. A smelter located close to the mine had been in operation since 1855. The waste material from the mine and the smelter was dumped in close vicinity of the mine. Total quantity of the waste has been estimated at 170000 tons. In order to establish environmental impacts, soil and stream sediment samples were investigated. Soil samples were collected at two different depths （horizons A and B） in a 100 m grid within an 88 ha area. In the vast area also 11 samples of stream sediments were considered. Heavy metals were determined by means of cold vapor atomic absorption spectrometry CV-AAS after aqua regia digestion. Based on the chemical analyses of samples, the estimated mercury mean for soils is 3.67 mg/kg （0.35-244 mg/kg） for horizon A and 1.39 mg/kg （0.17-71.7 mg/kg） for horizon B. The estimated mercury mean for stream sediments is 0.64 mg/kg （0.065-1.36 mg/kg）. The concentrations of mercury in soils generally decrease with depth and distance from the mine. The highest content of Hg was determined in a sample taken in the immediate vicinity of the smelter （719 mg/kg）. The results have shown that on the 9 ha of the study area, the contents of Hg in soils exceeded the officially set limit value for soils （10 mg/kg）. High contents of Hg in soil around the abandoned smelter are a consequence of former atmospheric emissions and technological losses. High contents of Hg were also found in the mine and smelter waste dump. At the edges of the study area and in the samples of stream sediments, Hg concentrations are low.     

滇西中生代花岗岩岩石化学与某些地球化学特征

The pulsational characteristics of magmatic activity are discussed in terms of potyeyelcs, polyphases and polystagcs for Mesozoic granites from Ⅰ,Ⅱ, Ⅲ areas.Based on 141 rock analyses, 80 semiquantitative spectrographic analyses for the granites and 50 chemical analyses for beryllium, niobium and tantalum, the authors present pertinent diagrams and petrochemical-geoehemical parameters which bring out the periodic variations in the bulk chemical composition of the rocks as wen as the periodicity of rare metal mineralization during the differentiation and evolution of Mesozoic granitic magmas. It is noted that the mineralization of lithium, beryllium, niobium and tantalum took place principally at later stages of each magmatic cycle. A camparison of the petrochemical-geochemical characteristics between granites east and west of the L-R Fault has led to the recognition of two different granite areas and two geochemical provinces for beryllium.     

A Study of the Accompanying Relationships between Uranium and Oil

It is not occasional that uranium deposits and oil accumulation occur in the same depression in the Erlian basin, Inner Mongolia. Some evidences show certain relations between uranium and oil in origin. This paper discusses and analyses the evidence for the relations between uranium deposits and oil and gas accumulation in terms of spatial distribution, geology, hydrochemistry and geochemistry. The paper also deals with the mechanism of the formation of uranium deposits and points out that it is of significance to use uranium as an indicator to search for oil and vice versa.     

澳大利亚造山型金矿和侵入岩有关金矿系统流体包裹体资料和矿化过程的比较

We have examined the fluid inclusion data and fluid chemistry of Australian orogenic and intrusion-related gold deposits to determine if similar mineralization processes apply to both styles of deposits.The fluid inclusion data from the Yilgarn craton,the western subprovince of the Lachlan orogen,the Tanami,Tennant Creek and Pine Creek regions,and the Telfer gold mine show that mineralization involved fluids with broadly similar major chemical components(i.e.H_2O NaCl CO_2±CH_4±N_2).These deposits formed over a wide range of temperature-pressure conditions(<200 to>500℃,<100～400MPa).Low salinity, CO_2-bearing inclusions and low salinity aqueous inclusions occur in both systems but the main difference between these two types of deposits is that most intrusion-related gold deposits also contain at least one population of high-salinity aqueous brine.Oxygen and hydrogen isotope data for both styles of deposit usually cannot distinguish between a magmatic or metamorphic source for the ore-bearing fluids.However,sulfur and lead isotope data for the intrusion-related gold deposits generally indicate either a magmatic source or mixing between magmatic and sedimentary sources of fluid.The metamorphic geothermal gradients associated with intrusion-related gold deposits are characterized by low pressure,high temperature metamorphism and high crustal geothermal gradients of>30/km.Where amphibole breakdown occurs in a granite source region,the spatially related deposits are more commonly associated with Cu-Au deposits rather than Au-only deposits that are associated with lower temperature granites.The dominant processes thought to cause gold precipitation in both types of deposits are fluid-rock interaction(e.g.desulfidation)or phase separation.Consideration of the physical and chemical properties of the H_2O-NaCl-CO_2 system on the nature of gold precipitation mechanisms at different crustal levels infers different roles of chemical(fluid-rock interaction)versus rheological(phase separation and/or fluid mixing)host-rock controls on gold deposition.This also implies that at the site of deposition,similar precipitation mechanisms operate at similar crustal levels for both orogenic and intrusion-related gold deposits.     

The impact of crustal rheology on natural seismicity: Campi Flegrei caldera case study

We analyze the crustal rheology beneath the active resurgent Campi Flegrei caldera(CFc) in Southern Italy by modelling the 3 D brittle-ductile(B/D) transition, based on available thermal, geological and geophysical data. Firstly, the thermal field in the conductive physical regime is modeled using a finite element method; based on an optimization tool, this method is applied to evaluate the location and dimensions of the deep thermal source beneath the caldera. A horizontally-extended thermal anomaly located at about 5000 m depth below sea level is identified beneath Pozzuoli Bay, a part of the CFc. The same isotherm is located at a depth of 20,000 m beyond the caldera. This indicates a higher horizontal temperature gradient in the caldera with respect to the surrounding area. Next, we utilize this thermal model to image the 3D rheological stratification of the shallow crust below the caldera with two different values of strain rates. Within the caldera, the B/D transitions with ε equal to 10^-12 s^-1 and 10^-8 s^-1 are located at 3000 m and 5000 m depths, respectively. Outside the caldera, the transition is very deep(15,000-20,000 m), seemingly uninfluenced by the thermal state of the CFc volcanism. Finally, we compare these results with the spatial distribution of earthquake hypocenters, Benioff strain release and b-value distribution to investigate the relationship between crustal rheology and seismicity characteristics. Our analysis reveals that the image of the B/D transition is in agreement with the distribution of earthquake hypocenters, constraining the potential seismogenic volume of the region. Our study demonstrates that knowledge of the rheological state of a volcanic system is an important element to interpret its dynamic, forecast future activity and improve evaluation of the associated seismic hazard.     

JUNCTION BETWEEN GANJIANG FAULT AND TANLU FAULT AND ITS SIGNIFICANCE TO MINERALIZATION

The concept of fault junction is proposed to describe the relationship between the two faults by the authors. The junction relationship between Ganjiang and Tanlu faults is analyzed in this paper, and this has been elucidated through numerical simulation about the tectonic stress field analysis. Numerical simulation of the tectonic stress field conducted for the major mineralization stage of the Jiujiang-Ruichang junction area reveals that the stress Feld of the junction structure at the major mineralization stage shows a relatively close relationship with the formation of the ore deposits (occurrences).     

Production Characteristics and the Control Factors of Surface Wells for Relieved Methane Drainage in the Huainan Mining Area

Based on the production data of a large number of surface drainage wells in the Huainan mining area, the present study shows that four types of typical production characteristics for relieved methane wells are recognized, of which the stable type for production and gas concentration is the most dominate, as determined by a comprehensive study on the volume and concentration of drained gases, as well as the stress changes of rocks influenced by mining. Some influence factors for the productive differences of the drainage wells were also been discussed. The results indicate that protective coal-seam mining has a significant effect on overlying strata, which promotes the development of pores and fractures of coal reservoirs for methane desorption and migration; however, the production and the stability of drainage wells are affected by deformation and damage of the overlying strata. The second distribution of strata stress is caused by mining engineering, and if the stress load is larger than the carrying capacity of the extraction well, the gas production would be influenced by the drainage well that has been damaged by rock movement. Furthermore, the case damage occurs first in the weak, lithologic interface by its special mechanical properties. The stability of drainage wells and the production status are also influenced by the different drilling techniques, uneven distribution of gas concentration, and combination of gob gas and methane from the protected layer.