西藏多龙矿集区发现浅成低温热液型铜(金银)矿床

根据2013年最新勘查成果、详细的地质编录,对西藏多龙铜金矿集区铁格龙南(荣那)铜(金银)矿床地质特征、矿床类型进行了初步研究,认为该矿床是斑岩-浅成低温热液成矿系统的产物,是典型的高硫型浅成低温热液矿床。矿床规模巨大,矿石中发育条带状、层纹状、皮壳状、致密块状明矾石、地开石,深部发育黄铁绢英岩化,黄铁矿的含量为3%~35%,矿石矿物由铜蓝、蓝辉铜矿、硫砷铜矿、斯硫铜矿、雅硫铜矿、久辉铜矿、斜方蓝辉铜矿、斑铜矿、黝铜矿、黄铜矿等组成。综合研究表明,推断浅部或外围发育独立的高硫型浅成低温热液型金矿,深部存在斑岩型铜(金银)矿体。该矿体的发现结束了西藏至今没有发现典型浅成低温热液矿床的历史,对区域找矿具有极其重要的指导意义。     

紫金山金铜矿床深部成矿作用研究和找矿前景评价的关键

紫金山铜金矿床是典型的高硫化浅成低温热液矿床, 发育巨厚的热液蚀变帽, 多孔状石英和高级泥化蚀变带等标志性特征; 特别是在金矿体之下出现垂直厚度超过1000米的巨大铜矿体, 属于蓝辉铜矿－铜蓝－硫砷铜矿－明矾石矿物组合的高硫化型浅成低温热液铜矿床类型, 铜硫化物的矿物学研究预示着深部可能变为斑岩型铜矿床。     

铜同位素组成在铜矿床中的变化规律

多接收杯电感耦合等离子体质谱仪(MC-ICP-MS)实现了对Cu同位素组成(δ65Cu)的精确测定,推动了Cu同位素在矿床研究中的发展和应用。在收集铜同位素近年来研究进展的基础上,系统归纳了不同铜矿床类型(岩浆熔离铜镍硫化物型矿床、接触交代型铜矿床、斑岩型铜矿床、热液型铜矿床、火山气液型铜矿床、沉积型铜矿床等)以及主要矿物(黄铜矿、辉铜矿、黄铁矿等)的Cu同位素组成特征及变化规律。研究表明,不同类型铜矿床和矿物Cu同位素组成差异较大,岩浆熔离铜镍硫化物型矿床、热液型铜矿床、沉积型铜矿床相对富集轻铜同位素,接触交代型铜矿床、斑岩型铜矿床、火山气液型铜矿床相对富集重铜同位素;黄铜矿、斑铜矿、铜蓝、硫砷铜矿、硅孔雀石等矿物相对富集重铜同位素,辉铜矿、黝铜矿、砷黝铜矿、孔雀石等矿物相对富集轻铜同位素;接触交代型铜矿床、火山气液型铜矿床中的黄铜矿相对富集重铜同位素,岩浆熔离铜镍硫化物矿床、斑岩型铜矿床、热液型铜矿床、沉积型铜矿床中的黄铜矿相对富集轻铜同位素;斑岩型铜矿床中的辉铜矿相对富集重铜同位素,热液型铜矿床、沉积型铜矿床中的辉铜矿相对富集轻铜同位素;接触交代型铜矿床中的黄铁矿相对富集重铜同位素;铜的硫化物和氧化物均相对富集轻铜同位素。     

紫金山铜金矿床铜蓝垂向变化特征探讨

<正>1研究背景及意义福建省上杭县的紫金山铜金矿床是我国大陆发现的首例高硫化型浅成低温热液矿床,具有"上金下铜"的垂直矿化分带特征,铜矿体主要分布在+928~-400 m,铜金属量丰富,大于300万t。该矿床目前已发现Cu-S体系8种矿物[1],硫砷铜矿、块硫砷铜矿、斑铜矿、黄铜矿等21种铜矿物。铜矿物中蓝辉铜矿、铜蓝、块硫砷铜矿、硫砷铜矿占99%以上。前人对铜蓝-蓝辉铜矿的矿物成分和矿物组合分布特征有较深     

福建省紫金山矿田东南矿段铜钼矿床蚀变与矿化特征

紫金山矿田东南矿段铜钼矿床地处紫金山浅成低温热液型铜金矿床和罗卜岭斑岩型铜钼矿床之间。利用近红外光谱技术测试蚀变矿物特征,并结合地质填图、钻孔编录和岩矿鉴定等工作,划分出钾化带、绿泥石绢英岩化带、黄铁绢英岩化带、地开石硅化带、明矾石地开石硅化带等5个蚀变带。钻孔编录和镜下观察发现,金属矿物分为2个期次,生成顺序为磁铁矿-黄铁矿（第1期）→赤铁矿→辉钼矿-黄铜矿-斑铜矿-黄铁矿（第2期）→硫砷铜矿-蓝辉铜矿-铜篮。矿化类型与蚀变分带关系密切：以黄铜矿+斑铜矿+辉钼矿为主的Ⅱ号矿体产出于绿泥石绢英岩化带,与罗卜岭铜钼矿的蚀变矿化特征相似;以蓝辉铜矿+铜蓝交代黄铜矿+斑铜矿为主的Ⅳ号主矿体主要产出于地开石硅化带和明矾石地开石硅化带底部;以蓝辉铜矿+铜蓝+硫砷铜矿为主的Ⅴ号矿体产出于明矾石地开石硅化带,与紫金山铜金矿的蚀变矿化特征相似。明矾石温度分带显示具有罗卜岭斑岩和紫金山火山机构2个高温中心,中、低温混合明矾石化与Ⅳ号主矿体空间上呈显耦合关系。另外,Ⅳ号主矿体的云母矿物Al-OH吸收峰小于2205 nm。初步认为Ⅳ号主矿体是紫金山浅成低温热液叠加罗卜岭斑岩矿床外带所形成。     

紫金山金铜矿二元铜硫化物成分特点的初步研究

文章在电子显微成分分析的基础上,结合XRD、振动光谱等研究手段,对高硫型浅成热液形成的紫金山金铜矿床中铜硫化物的成分、物相特点进行了研究.首次在该区找到了久辉铜矿(Cu1.97S)、雅硫铜矿(Cu1.25S)等铜硫二元组分系列矿物,并发现了铜蓝被蓝辉铜矿明显交代的现象,进而推断它们基本上是同期形成的,但其所处的氧化-还...     

福建紫金山矿田金、银赋存状态及黄铁矿标型研究

福建紫金山铜金矿床、悦洋银多金属矿床和罗卜岭斑岩型矿床同属于与陆相火山岩相关的斑岩-浅成低温热液成矿系统。通过显微镜观察、电子探针成分分析、场发射扫描电子显微镜观测和矿石元素含量分析等综合研究方法,认为紫金山铜金矿床金的赋存状态除金矿石中自然金矿物外,金还赋存于铜矿石中硫砷铜矿、蓝辉铜矿、久辉铜矿和黄铁矿中,硫砷铜矿含金性最好,金含量最高达370 μg/g;悦洋银多金属矿床银的赋存状态包括独立银矿物、亚显微银矿物和类质同象银,银的载体矿物有方铅矿、黄铁矿、黄铜矿等;黄铁矿是紫金山铜金矿床和悦洋银多金属矿床中共同存在的矿物,黄铁矿成分标型特征表明两处矿床的形成均与热液有关,与前人的研究结果一致。     

福建省紫金山铜金矿床成矿物理化学条件的研究

紫金山高硫浅成低温热液型铜金矿床以一套独具特色的由地开石、明矾石组成的高级泥质蚀变和由硫砷铜矿、蓝辉铜矿、铜蓝组成的铜矿物组合为特征。本文根据矿床的蚀变矿物和矿石矿物组合及矿物的相互关系，着重应用热力学的原理与方法研究矿床形成的物理化学条件。认为形成这一类型矿床的流体是一种高氧逸度、高硫逸度的中低温酸性流体。     

西藏铁格隆南斑岩-高硫型浅成低温热液矿床主要矿石矿物特征

铁格隆南矿床位于班公湖—怒江成矿带西段多龙矿集区,是青藏高原发现的首例具有典型高硫型浅成低温热液矿化特征的超大型Cu(Au、Ag)矿床。本文通过大量的钻孔岩矿心地质编录,结合矿相学及电子探针分析,查明铁格隆南矿床的矿石矿物以原生硫化物为主,主要是斑铜矿、黄铜矿等Cu-Fe-S体系矿物、硫砷铜矿、砷黝铜矿等Cu-As-S体系矿物和以铜蓝和蓝辉铜矿为代表的Cu-S二元体系矿物,以及少量辉钼矿、方铅矿、闪锌矿,微量硫锡砷铜矿等。从矿石矿物组合特征可看出,铁格隆南矿床是高硫型矿化叠加于斑岩型矿化之上复合成矿的典型实例,矿床深部具有进一步扩大斑岩铜矿规模的巨大潜力,是下一步获取更多资源量的重点勘查方向。     

福建紫金山铜金矿床铜矿物及其主要特征

<正>位于福建省上杭县的紫金山铜金矿床是我国大陆发现的首例高硫化型浅成低温热液矿床,具有"上金下铜"的垂直矿化分带特征。金矿体之下为垂直厚度超过1000米的巨大铜矿体,铜矿石以蓝辉铜矿-铜蓝-硫砷铜矿-明矾石矿物组合为主,铜矿物种类多样化。1铜矿物的种类在紫金山铜金矿区内铜矿物种类丰富,目前     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Regional distribution of Al,B, Ba,Ca, K,La, Mg,Mn, Na,P, Rb,Si, Sr,Th, U and Y in terrestrial moss within a 188,000 km2 area of the central Barents region: influence of geology,seaspray and human activity

Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km² area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).     

NEW SET OF LOW CONCENTRATION STANDARDS FOR LA, CE, SM, YB, LU, Y, SC, V, NB AND TA IN SILICATES

We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al₂O₃-SiO₂ ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses.