The relation between Cu/Au ratio and formation depth of porphyry-style Cu–Au ± Mo deposits

Constraints on gold and copper ore grades in porphyry-style Cu–Au ± Mo deposits are re-examined, with particular emphasis on published fluid pressure and formation depth as indicated by fluid inclusion data and geological reconstruction. Defining an arbitrary subdivision at a molar Cu/Au ratio of 4.0 × 10⁴, copper–gold deposits have a shallower average depth of formation (2.1 km) compared with the average depth of copper–molybdenum deposits (3.7 km), based on assumed lithostatic fluid pressure from microthermometry. The correlation of Cu/Au ratio with depth is primarily influenced by the variations of total Au grade. Despite local mineralogical controls within some ore deposits, the overall Cu/Au ratio of the deposits does not show a significant correlation with the predominant type of Cu–Fe sulfide, i.e., chalcopyrite or bornite. Primary magma source probably contributes to metal endowment on the province scale and in some individual deposits, but does not explain the broad correlation of metal ratios with the pressure of ore formation. By comparison with published experimental and fluid analytical data, the observed correlation of the Cu/Au ratio with fluid pressure can be explained by dominant transport of Cu and Au in a buoyant S-rich vapor, coexisting with minor brine in two-phase magmatic hydrothermal systems. At relatively shallow depth (approximately <3 km), the solubility of both metals decreases rapidly with decreasing density of the ascending vapor plume, forcing both Cu and Au to be coprecipitated. In contrast, magmatic vapor cooling at deeper levels (approximately >3 km) and greater confining pressure is likely to precipitate copper ± molybdenum only, while sulfur-complexed gold remains dissolved in the relatively dense vapor. Upon cooling, this vapor may ultimately contract to a low-salinity epithermal liquid, which can contribute to the formation of epithermal gold deposits several kilometers above the Au-poor porphyry Cu–(Mo) deposit. These findings and interpretations imply that petrographic inspection of fluid inclusion density may be used as an exploration indicator. Low-pressure brine + vapor systems are favorable for coprecipitation of both metals, leading to Au-rich porphyry–copper–gold deposits. Epithermal gold deposits may be associated with such shallow systems, but are likely to derive their ore-forming components from a deeper source, which may include a deeply hidden porphyry–copper ± molybdenum deposit. Exposed high-pressure brine + vapor systems, or stockwork veins containing a single type of intermediate-density inclusions, are more likely to be prospective for porphyry–copper ± molybdenum deposits.     

Genesis of the Au–Bi–Cu–As, Cu–Mo ± W, and base–metal Au–Ag mineralization at the Mountain Freegold (Yukon, Canada): constraints from Ar–Ar and Re–Os geochronology and Pb and stable isotope compositions

The genesis of mineralized systems across the Mountain Freegold area, in the Dawson Range Cu–Au?±?Mo Belt of the Tintina Au province was constrained using Pb and stable isotope compositions and Ar–Ar and Re–Os geochronology. Pb isotope compositions of sulfides span a wide compositional range (²⁰⁶Pb/²⁰⁴Pb, 18.669–19.861; ²⁰⁸Pb/²⁰⁴Pb, 38.400–39.238) that overlaps the compositions of the spatially associated igneous rocks, thus indicating a magmatic origin for Pb and probably the other metals. Sulfur isotopic compositions of sulfide minerals are broadly similar and their δ³⁴S (Vienna-Canyon Diablo Troilite (V-CDT)) values range from ?1.4 to 3.6 ‰ consistent with the magmatic range, with the exception of stibnite from a Au–Sb–quartz vein, which has δ³⁴S values between ?8.1 and ?3.1 ‰. The δ³⁴S values of sulfates coexisting with sulfide are between 11.2 and 14.2 ‰; whereas, those from the weathering zone range from 3.7 to 4.3 ‰, indicating supergene sulfates derived from oxidation of hypogene sulfides. The δ¹³C (Vienna Peedee Belemnite (VPDB)) values of carbonate range from ?4.9 to 1.1 ‰ and are higher than magmatic values. The δ¹⁸O (V-SMOW) values of magmatic quartz phenocrysts and magmatic least-altered rocks vary between 6.2 and 10.1 ‰ and between 5.0 and 10.1 ‰, respectively, whereas altered magmatic rocks and hydrothermal minerals (quartz and magnetite) are relatively ¹⁸O-depleted (4.2 to 7.9 ‰ and ?6.3 to 1.5 ‰, respectively). Hydrogen isotope compositions of both least-altered and altered igneous rock samples are D-depleted (from ?133 to ?161 ‰ Vienna-Standard Mean Ocean Water (V-SMOW)), consistent with differential magma degassing and/or post-crystallization exchange between the rocks and meteoric ground water. Zircon from a chlorite-altered dike has a U–Pb crystallization age of 108.7?±?0.4 Ma; whereas, the same sample yielded a whole-rock Ar–Ar plateau age of 76.25?±?0.53 Ma. Likewise, molybdenite Re–Os model ages range from 75.8 to 78.2 Ma, indicating the mineralizing events are genetically related to Late Cretaceous volcano-plutonic intrusions in the area. The molybdenite Re–Os ages difference between the nearby Nucleus (75.9?±?0.3 to 76.2?±?0.3 Ma) and Revenue (77.9?±?0.3 to 78.2?±?0.3 Ma) mineral occurrences suggests an episodic mineralized system with two pulses of hydrothermal fluids separated by at least 2 Ma. This, in combination with geological features suggest the Nucleus deposit represents the apical and younger portion of the Revenue–Nucleus magmatic-hydrothermal system and may suggest an evolution from the porphyry to the epithermal environments.     

Mineralization and fluid evolution of the Jiyuan polymetallic Cu–Ag–Pb–Zn–Au deposit,eastern Tianshan,NW China

The newly discovered Jiyuan Cu–Ag–(Pb–Zn–Au) deposit is located in the southern section of the eastern Tianshan orogenic belt, Xinjiang, northwestern China. It is the first documented deposit in the large Aqikekuduke Ag–Cu–Au belt in the eastern Tianshan orogen. Detailed field observations, parageneses, and fluid inclusion studies suggest an epithermal ore genesis for the main Cu–Ag mineralization, accompanied by a complicated hydrothermal alteration history most likely associated with the multi-stage tectonic evolution of the eastern Tianshan. The Jiyuan Cu–Ag ore bodies are located along the EW-striking, south-dipping Aqikekuduke fault and are hosted by Precambrian marble and intercalated siliceous rocks. Early-stage skarn alteration occurred along the contact zone between the marble layers and Early Carboniferous diorite–granodiorite and monzogranite intrusions; the skarns are characterized by diopside–tremolite–andradite–pyrite–(magnetite) assemblages. Local REE-enriched synchysite–rutile–arsenopyrite–(clinochlorite–microcline–albite) assemblages are related to K–Na alteration associated with the monzogranite intrusions and formed under conditions of high temperature (310°C) and high salinity (19.9 wt.% NaCl). Subsequent hydrothermal alteration produced a series of quartz and calcite veins that precipitated from medium- to low-temperature saline fluids. These include early ‘smoky’ quartz veins (190°C; 3.0 wt.% NaCl) that are commonly barren, coarse-grained Cu–Ag mineralized quartz veins (210°C; 2.4 wt.% NaCl), and late-stage unmineralized calcite veins (140°C; 1.1 wt.% NaCl). Tremolite and Ca-rich scapolite veins formed at an interval between early and mineralized quartz veins, indicating a high-temperature, high-salinity (>500°C; 9.5 wt.% NaCl) Ca alteration stage. Fluid mixing may have played an important role during Cu–Ag mineralization and an external low-temperature Ca-rich fluid is inferred to have evolved in the ore-forming system. The Jiyuan auriferous quartz veins possess fluid characteristics distinct from those of the Cu–Ag mineralized quartz veins. CO₂-rich fluid inclusions, fluid boiling, and mixing all demonstrate that these auriferous quartz veins acted as hosts for the orogenic-type gold mineralization, a common feature in the Tianshan orogenic belt.     

Origin of epithermal Ag–Au–Cu–Pb–Zn mineralization in Guanajuato, Mexico

The Guanajuato epithermal district is one of the largest silver producers in Mexico. Mineralization occurs along three main vein systems trending dominantly northwest–southeast: the central Veta Madre, the La Luz system to the northwest, and the Sierra system to the east. Mineralization consists dominantly of silver sulfides and sulfosalts, base metal sulfides (mostly chalcopyrite, galena, sphalerite, and pyrite), and electrum. There is a broad zonation of metal distribution, with up to 10 % Cu+Pb+Zn in the deeper mines along the northern and central portions of the Veta Madre. Ore occurs in banded veins and breccias and as stockworks, with gangue composed dominantly of quartz and calcite. Host rocks are Mesozoic sedimentary and intrusive igneous rocks and Tertiary volcanic rocks. Most fluid inclusion homogenization temperatures are between 200 and 300 °C, with salinities below 4 wt.% NaCl equivalent. Fluid temperature and salinity decreased with time, from 290 to 240 °C and from 2.5 to 1.1 wt.% NaCl equivalent. Relatively constant fluid inclusion liquid-to-vapor ratios and a trend of decreasing salinity with decreasing temperature and with increasing time suggest dilution of the hydrothermal solutions. However, evidence of boiling (such as quartz and calcite textures and the presence of adularia) is noted along the Veta Madre, particularly at higher elevations. Fluid inclusion and mineralogical evidence for boiling of metal-bearing solutions is found in gold-rich portions of the eastern Sierra system; this part of the system is interpreted as the least eroded part of the district. Oxygen, carbon, and sulfur isotope analysis of host rocks, ore, and gangue minerals and fluid inclusion contents indicate a hydrothermal fluid, with an initial magmatic component that mixed over time with infiltrating meteoric water and underwent exchange with host rocks. Mineral deposition was a result of decreasing activities of sulfur and oxygen, decreasing temperature, increasing pH, and, in places, boiling.     

Petrogenesis and Mineralization of the Tongshan Skarn Cu–Au Deposit, Lower Yangtze Metallogenic Belt

Please refer to the attachment(s) for more details     

Alteration, zoning model, and mineralogical structure considering lithogeochemical investigation in Northern Dalli Cu–Au porphyry

Dalli Cu–Au porphyry deposit was occurred in the igneous diorite, quartz diorite porphyry (QDP), and volcanic rocks such as porphyritic amphibole andesite, andesite (AND), dacite, and pyroclastics during the late Miocene to Pliocene. Regolith investigations and Advanced Spaceborne Thermal Emission and Reflection Radiometer images were used to identify the anomalous areas. According to lithogeochemical survey (from boreholes and trenches) in Northern Dalli Cu–Au porphyry, the potassic, chlorite, sericite, propylitic, and argillic alterations have been found and mineralization was basically associated with potassic and quartz–sericite alterations. The alteration is dominantly moderate quartz chlorite?±?sericite magnetite with 1–10 mm wide quartz?±?magnetite veinlets. The elevated copper–gold values are correlated with density of stockworking and mineralization. The intensity of the mineralization is high in the contact of QDP and AND with increases in pyrite and chalcopyrite values. Malachite, native Cu, and bornite were used to identify supergene, transition, and hypogene zone. In addition, molybdenum increased near to the center of granodiorite intrusion. And besides, from depth to surface in DDH03 and wall rock to mineralization zones, a sequence of Mo→Cu (Au)→Au (Cu) was recorded and the mineralization temperature cooled down (from high to low). The alteration is characterized by specific pattern and structure in Dalli Cu–Au porphyry deposit. The alteration model was followed from the modified Lowell and Gilbert model. The porphyry is stockworked by quartz veins and by quartz magnetite veins. Vein distribution and ore mineralogy vary between the different alteration zones. Due to the formation of an iron cap in the supergene, especially in the southern hills, supergene grade was higher than hypogene zone. Also, hematite, as a dominant Fe oxide in DDH03 borehole with minor limonite, jarosite, and goethite created thickness about 150–270 m in supergene zone; finally, this finding show a possibility of an extensive mineralization.     

Platinum Mineralization in Multimetal Gold–Polymetallic,Au–Bi,Cu–Mo Porphyry,Cu–Ni,Titanomagnetite, and Copper–Sulfide Ore Deposits and Occurrences of the Upper Amur Region (Far East,Russia)

New data on platinum mineralization in ores, metasomatic rocks, concentrates, and tailings and wastes of some gold–polymetallic, Au–Bi, Cu–Mo porphyry, Cu–Ni, and titanomagnetite ore deposits and occurrences of the Upper Amur Region are presented. The contents of platinoids, Au and Ag in multimetal ores of gold-polymetallic, Au–Bi, Cu–Mo porphyry, Cu–Ni, and titanomagnetite ore deposits and ore occurrences are given. In addition, recommendations on the necessity of continuing scientific studies, revision, and resampling works in the search for platinoids in other complex ores of deposits and occurrences of the Upper Amur Region are given.     

Re–Os and U–Pb geochronology of the Duobaoshan porphyry Cu–Mo–(Au) deposit,northeast China,and its geological significance

The large-scale Duobaoshan porphyry Cu–Mo–(Au) deposit is located at the north segment of the Da Hinggan Mountains, northeast China. Six molybdenite samples from the Duobaoshan deposit were selected for Re–Os isotope measurement to define the mineralization age of the deposit, yieldings a Re–Os isochron age of 475.9 ± 7.9 Ma (2σ), which is accordant with the Re–Os model ages of 476.6 ± 6.9–480.2 ± 6.9 Ma. This age is consistent with the age of the related granodiorite porphyry, which was dated as 477.2 ± 4 Ma by zircon U–Pb analysis using LA-ICP-MS. These ages disagree with the previous K–Ar age determinations that suggest a correlation of intrusive rocks of the Duobaoshan area with the Hercynian intrusive rocks of Carboniferous–Permian age. These ages demonstrate that the Duobaoshan granodiorite porphyry and related Cu–Mo deposit occurred in the Early Ordovician. The rhenium content of molybdenite varies from 290.9 to 728.2 μg/g, with an average content of 634.8 μg/g. The high rhenium content in molybdenite of the Duobaoshan deposit suggests that the ore-forming materials may be mainly of mantle source.     

Geological characteristics and genesis of the Laoshankou Fe–Cu–Au deposit in Junggar,Xinjiang, Central Asian Orogenic Belt

The Laoshankou Fe–Cu–Au deposit is located at the northern margin of Junggar Terrane, Xinjiang, China. This deposit is hosted in Middle Devonian andesitic volcanic breccias, basalts, and conglomerate-bearing basaltic volcanic breccias of the Beitashan Formation. Veined and lenticular Fe–Cu–Au orebodies are spatially and temporally related to diorite porphyries in the ore district. Wall–rock alteration is dominated by skarn (epidote, chlorite, garnet, diopside, actinolite, and tremolite), with K–feldspar, carbonate, albite, sericite, and minor quartz. On the basis of field evidence and petrographic observations, three stages of mineralization can be distinguished: (1) a prograde skarn stage; (2) a retrograde stage associated with the development of Fe mineralization; and (3) a quartz–sulfide–carbonate stage associated with Cu–Au mineralization. Electron microprobe analysis shows that garnets and pyroxenes are andradite and diopside-dominated, respectively. Fluid inclusions in garnet yield homogenization temperatures (T_h) of 205–588 °C, and salinities of 8.95–17.96 wt.% NaCl equiv. In comparison, fluid inclusions in epidote and calcite yield T_h of 212–498 and 150–380 °C, and salinities of 7.02–27.04 and 13.4–18.47 wt.% NaCl equiv., respectively. Garnets yield values of 6.4‰ to 8.9‰ δ¹⁸O_fluid, whereas calcites yield values of − 2.4‰ and 4.2‰ δ¹⁸O_fluid, and − 0.9‰ to 2.4‰ δ¹³C_PDB, indicating that the ore-forming fluids were dominantly magmatic fluids in the early stage and meteoric water in the late stage. The δ³⁴S values of sulfides range from − 2.6‰ to 5.4‰, indicating that the sulfur in the deposit was probably derived from deep-seated magmas. The diorite porphyry yields LA–MC–ICP–MS zircon U–Pb age of 379.7 ± 3.0 Ma, whereas molybdenites give Re–Os weighted mean age of 383.2 ± 4.5 Ma (MSWD = 0.06). These ages suggest that the mineralization-related diorite porphyry was emplaced during the Late Devonian, coincident with the timing of mineralization within the Laoshankou Fe–Cu–Au deposit. The geological and geochemical evidence presented here suggest that the Laoshankou Fe–Cu–Au deposit is a skarn deposit.     

Formation of the Vysoká–Zlatno Cu–Au skarn–porphyry deposit, Slovakia

The central zone of the Miocene Štiavnica stratovolcano hosts several occurrences of Cu–Au skarn–porphyry mineralisation, related to granodiorite/quartz–diorite porphyry dyke clusters and stocks. Vysoká–Zlatno is the largest deposit (13.4 Mt at 0.52% Cu), with mineralised Mg–Ca exo- and endoskarns, developed at the prevolcanic basement level. The alteration pattern includes an internal K- and Na–Ca silicate zone, surrounded by phyllic and argillic zones, laterally grading into a propylitic zone. Fluid inclusions in quartz veinlets in the internal zone contain mostly saline brines with 31–70 wt.% NaCl eq. and temperatures of liquid–vapour homogenization (Th) of 186–575°C, indicating fluid heterogenisation. Garnet contains inclusions of variable salinity with 1–31 wt.% NaCl eq. and Th of 320–360°C. Quartz–chalcopyrite veinlets host mostly low-salinity fluid inclusions with 0–3 wt.% NaCl eq. and Th of 323–364°C. Data from sphalerite from the margin of the system indicate mixing with dilute and cooler fluids. The isotopic composition of fluids in equilibrium with K-alteration and most skarn minerals (both prograde and retrograde) indicates predominantly a magmatic origin (δ¹⁸O_fluid 2.5–12.3‰) with a minor meteoric component. Corresponding low δD_fluid values are probably related to isotopic fractionation during exsolution of the fluid from crystallising magma in an open system. The data suggest the general pattern of a distant source of magmatic fluids that ascended above a zone of hydraulic fracturing below the temperature of ductile–brittle transition. The magma chamber at ∼5–6 km depth exsolved single-phase fluids, whose properties were controlled by changing PT conditions along their fluid paths. During early stages, ascending fluids display liquid–vapour immiscibility, followed by physical separation of both phases. Low-salinity liquid associated with ore veinlets probably represents a single-phase magmatic fluid/magmatic vapour which contracted into liquid upon its ascent.     

Petrogenesis and metallogenic setting of porphyries of the Duobuza porphyry Cu–Au deposit,central Tibet,China

Given that the Duobuza deposit was the first porphyry Cu–Au deposit discovered in central Tibet, the mineralization and mineralized porphyry in this area have been the focus of intensive research, yet the overall porphyry sequence associated with the deposit remains poorly understood. New geological mapping, logging, and sampling of an early granodiorite porphyry, an inter-mineralization porphyry, and a late-mineralization diorite porphyry were complemented by LA–ICP–MS zircon dating, whole-rock geochemical and Sr–Nd isotopic analyses, and in situ Hf isotopic analyses for both inter- and late-mineralization porphyry intrusions. All of the porphyry intrusions are high-K and calc-alkaline, and were emplaced at ca. 120 Ma. The geochemistry of these intrusions is indicative of arc magmatism, as all three porphyry phases are enriched in light rare earth elements and large ion lithophile elements, and depleted in heavy rare earth elements and high field strength elements. These similar characteristics of the intrusions, when combined with the relatively high (⁸⁷Sr/⁸⁶Sr)_i, negative ε_Nd(t), and positive ε_Hf(t) values, suggest that the magmas that formed the porphyries were derived from a common source region and shared a single magma chamber. The magmas were generated by the mixing of upwelling metasomatized mantle-wedge-derived mafic magmas and magmas generated by partial melting of amphibolite within the lower crust.The inter-mineralization porphyry has the lowest ε_Nd(t) and highest (⁸⁷Sr/⁸⁶Sr)_i values, suggesting that a large amount of lower-crust-derived material was incorporated into the melt and that metals such as Cu and Au from the enriched lower crust were scavenged by the parental magma. The relative mafic late-mineralization diorite porphyry phase was formed by the residual magma in the magma chamber mixing with upwelling mafic melt derived from metasomatized mantle. The magmatic–hydrothermal evolution of the magma in the chamber released ore-forming fluid that was transported mainly by the inter-mineralization porphyry phase during the mineralization stage, which ultimately formed the Duobuza porphyry Cu–Au deposit.These porphyritic intrusions of the Duobuza deposit have high Mg^# and low (La/Yb)_N values, and show some high LILE/HFSE ratios, indicating the magma source was enriched by interaction with slab-derived fluids. Combined with age constraints on the regional tectonic evolution, these dating and geochemical results suggest that the Duobuza porphyry Cu–Au deposit formed in a subduction setting during the final stages of the northward subduction of the Neo-Tethyan Ocean.     

Geological,fluid inclusion and isotopic studies of the Yinshan Cu–Au–Pb–Zn–Ag deposit,South China: Implications for ore genesis and exploration

The Yinshan Cu–Au–Pb–Zn–Ag deposit is located in Dexing, South China. Ore bodies are primarily hosted in low-grade phyllite of the Neoproterozoic Shuangqiaoshan Group along EW- and NNW-striking fault zones. Pb–Zn–Ag mineralization is dictated by Jurassic rhyolitic quartz porphyries (ca. 172 Ma), whereas Cu–Au mineralization is associated with Jurassic dacite porphyries (ca. 170 Ma). The main ore minerals are pyrite, chalcopyrite, galena, sphalerite, tetrahedrite–tennatite, gold, silver, and silver sulphosalt, and the principal gangue minerals are quartz, sericite, calcite, and chlorite. Two-phase liquid-rich (type I), two-phase vapor-rich (type II), and halite-bearing (type III) fluid inclusions can be observed in the hydrothermal quartz-sulfides veins. Type I inclusions are widespread and have homogenization temperatures of 187–303 °C and salinities of 4.2–9.5 wt.% NaCl equivalent in the Pb–Zn–Ag mineralization, and homogenization temperatures of 196–362 °C and salinities of 3.5–9.9 wt.% NaCl equivalent in the Cu–Au mineralization. The pervasive occurrence of type I fluid inclusions with low-moderate temperatures and salinities implies that the mineralizing fluids formed in epithermal environments. The type II and coexisting type III inclusions, from deeper levels below the Cu–Au ore bodies, share similar homogenization temperatures of 317–448 °C and contrasting salinities of 0.2–4.2 and 30.9–36.8 wt.% NaCl equivalent, respectively, which indicates that boiling processes occurred. The sulfur isotopic compositions of sulfides (δ³⁴S = −1.7‰ to +3.2‰) suggest a homogeneous magmatic sulfur source. The lead isotopes of sulfides (²⁰⁶Pb/²⁰⁴Pb = 18.01–18.07; ²⁰⁷Pb/²⁰⁴Pb = 15.55–15.57; and ²⁰⁸Pb/²⁰⁴Pb = 38.03–38.12) are consistent with those of volcanic–subvolcanic rocks (²⁰⁶Pb/²⁰⁴Pb = 18.03–18.10; ²⁰⁷Pb/²⁰⁴Pb = 15.56–15.57; and ²⁰⁸Pb/²⁰⁴Pb = 38.02–38.21), indicating a magmatic origin for lead in the ore. The oxygen and hydrogen isotope compositions (δ¹⁸O = +7.8‰ to +10.5‰, δD = −66‰ to −42‰) of inclusion water in quartz imply that ore-forming fluids were mainly derived from magmatic sources. The local boiling process beneath the epithermal Cu–Au ore-forming system indicates the possibility that porphyry-style ore bodies may exist at even deeper zones.     

Contrasting fluids and reservoirs in the contiguous Marcona and Mina Justa iron oxide–Cu (–Ag–Au) deposits,south-central Perú

The Marcona–Mina Justa deposit cluster, hosted by Lower Paleozoic metaclastic rocks and Middle Jurassic shallow marine andesites, incorporates the most important known magnetite mineralization in the Andes at Marcona (1.9 Gt at 55.4% Fe and 0.12% Cu) and one of the few major iron oxide–copper–gold (IOCG) deposits with economic Cu grades (346.6 Mt at 0.71% Cu, 3.8 g/t Ag and 0.03 g/t Au) at Mina Justa. The Middle Jurassic Marcona deposit is centred in Ica Department, Perú, and the Lower Cretaceous Mina Justa Cu (Ag, Au) prospect is located 3–4 km to the northeast. New fluid inclusion studies, including laser ablation time-of-flight inductively coupled plasma mass spectrometry (LA-TOF-ICPMS) analysis, integrated with sulphur, oxygen, hydrogen and carbon isotope analyses of minerals with well-defined paragenetic relationships, clarify the nature and origin of the hydrothermal fluid responsible for these contiguous but genetically contrasted deposits. At Marcona, early, sulphide-free stage M-III magnetite–biotite–calcic amphibole assemblages are inferred to have crystallized from a 700–800°C Fe oxide melt with a δ¹⁸O value from +5.2‰ to +7.7‰. Stage M-IV magnetite–phlogopite–calcic amphibole–sulphide assemblages were subsequently precipitated from 430–600°C aqueous fluids with dominantly magmatic isotopic compositions (δ³⁴S = +0.8‰ to +5.9‰; δ¹⁸O = +9.6‰ to +12.2‰; δD = −73‰ to −43‰; and δ¹³C = −3.3‰). Stages M-III and M-IV account for over 95% of the magnetite mineralization at Marcona. Subsequent non-economic, lower temperature sulphide–calcite–amphibole assemblages (stage M-V) were deposited from fluids with similar δ³⁴S (+1.8‰ to +5.0‰), δ¹⁸O (+10.1‰ to +12.5‰) and δ¹³C (−3.4‰), but higher δD values (average −8‰). Several groups of lower (<200°C, with a mode at 120°C) and higher temperature (>200°C) fluids can be recognized in the main polymetallic (Cu, Zn, Pb) sulphide stage M-V and may record the involvement of modified seawater. At Mina Justa, early magnetite–pyrite assemblages precipitated from a magmatic fluid (δ³⁴S = +0.8‰ to +3.9‰; δ¹⁸O = +9.5‰ to +11.5‰) at 540–600°C, whereas ensuing chalcopyrite–bornite–digenite–chalcocite–hematite–calcite mineralization was the product of non-magmatic, probably evaporite-sourced, brines with δ³⁴S ≥ +29‰, δ¹⁸O = 0.1‰ and δ¹³C = −8.3‰. Two groups of fluids were involved in the Cu mineralization stage: (1) Ca-rich, low-temperature (approx. 140°C) and high-salinity, plausibly a basinal brine and (2) Na (–K)-dominant with a low-temperature (approx. 140°C) and low-salinity probably meteoric water. LA-TOF-ICPMS analyses show that fluids at the magnetite–pyrite stage were Cu-barren, but that those associated with external fluids in later stages were enriched in Cu and Zn, suggesting such fluids could have been critical for the economic Cu mineralization in Andean IOCG deposits.     

Magmatic and structural controls on porphyry-style Cu–Au–Mo mineralization at Kemess South,Toodoggone District of British Columbia,Canada

Kemess South is the only Cu–Au–Mo mine in the Toodoggone district and a major Cu and Au producer in British Columbia. Porphyry-style Cu–Au–Mo mineralization is mainly hosted by the tabular, SW-plunging, 199.6 ± 0.6-Ma Maple Leaf granodiorite, which intrudes tightly folded, SW-dipping, Permian Asitka Group siltstone and limestone and homogeneous Triassic Takla Group basalt. Southwest-dipping 194.0 ± 0.4-Ma Toodoggone Formation conglomerate, volcaniclastic, and epiclastic rocks overlie the granodiorite and Asitka Group rocks. Minor Cu–Au–Mo mineralization is hosted by the immediate Takla Group basalt country rock, whereas low-tonnage high-grade Cu zones occur beneath a 30-m-thick leached capping in supergene-altered granodiorite and in exotic positions in overlying Toodoggone Formation conglomerate. Granodiorite has an intrusive contact with mineralized and altered Takla Group basalt but displays a sheared contact with unmineralized and less altered Asitka Group siltstone. The North Block fault is a deposit-scale, E-striking, steeply S-dipping normal fault that juxtaposes the granodiorite/basalt ore body against unmineralized Asitka Group rocks. Younger NW- and NE-striking normal–dextral faults cut all rock types, orebodies, and the North Block fault with displacements of up to 100 m and result in the graben-and-horst-style block faulting of the stratigraphy and ore body. Both basalt and granodiorite host comparable vein sequence and alteration histories, with minor variations in hydrothermal mineral assemblages caused by differing protolith chemistry. Early potassic alteration (and associated early-stage Cu ± Au ± Mo mineralization) is partly replaced by phyllic and intermediate argillic alteration associated with main-stage Cu–Au–Mo mineralization. Two main-stage veins have Re–Os molybdenite ages of 201.3 ± 1.2 and 201.1 ± 1.2 Ma. These mineralization ages overlap the 199.6 ± 0.6-Ma U–Pb zircon crystallization age for the Maple Leaf granodiorite. Late-stage pyrite-rich stringer veins and related phyllic alteration assemblages are cut by anhydrite-rich, carbonate-rich, and chlorite veins. Fluids and metals associated with early-, main-, and late-stage veins were probably derived principally from the same deep magma chamber as the Maple Leaf granodiorite. These magmatic-derived fluids interacted with Asitka and Takla Group country rocks and possibly with meteoric and metamorphic fluids prior to mineralization.     

Geology,mineralogy, and geochemistry of fault-controlled hydrothermal Cu–Au mineralization in the Shanmen Volcanic Basin,SE China

The Yukeng–Banling deposit is a typical fault-controlled hydrothermal Cu–Au deposit in the Shanmen Volcanic Basin (SVB), SE China. Ore bodies commonly occur as lodes, lenses and disconnected pods dipping SW with vertical zonation of ore minerals. Ore-related hydrothermal alteration is well developed on both sides of the veins, dominated by silicification, sericitization, chloritization and argillation with a banded alteration zonation. The mineralization can be divided into three stages (stages I, II and III). Native gold is present as veinlets in fractures of fine-grained pyrite from stage II.Zircon U–Pb and Rb–Sr isochron ages indicate that the Cu–Au mineralization is coeval with the Caomen alkaline granite and Xiaokeng quartz-diorite, both emplaced at ca. 102 Ma. Microthermometric measurements of fluid inclusions in quartz and sphalerite from stage II veins indicate that the Yukeng–Banling deposit is an epithermal deposit. Six ore-related quartz grains have δD_H2O values of − 69 to − 43‰, and δ¹⁸O_H2O values calculated using total homogenization temperatures that range from − 2.0 to 0.7‰. All samples plot in an area between the magmatic field and the meteoric line, suggesting that the ore-forming fluids are derived from a mixed source of magmatic and meteoric waters. δ³⁴S values for eight pyrite separates range from − 2.1 to + 4.1‰ with an average of + 1.7‰, and δ³⁴S values for galena and sphalerite are 2.3‰ and 2.2‰, similar to magmatic sulfur. Four alkaline granite samples have Pb isotopic ratios (²⁰⁶Pb/²⁰⁴Pb)_t = 18.175–18.411, (²⁰⁷Pb/²⁰⁴Pb)_t = 15.652–15.672 and (²⁰⁸Pb/²⁰⁴Pb)_t = 38.343–38.800. Three quartz-diorite samples have ratios (²⁰⁶Pb/²⁰⁴Pb)_t, (²⁰⁷Pb/²⁰⁴Pb)_t and (²⁰⁸Pb/²⁰⁴Pb)_t of 18.277–18.451, 15.654–15.693 and 38.673–38.846, respectively. These age-calculated lead isotopic data for alkaline granite are similar to those for the analyzed sulfides. Co/Ni ratios for stage II pyrites range from 1.42 to 5.10, indicating that the Yukeng–Banling deposit records the past involvement of magmatic hydrothermal fluids. The isotope data, together with geological, mineralogical and geochronological evidence, favor a primary magmatic source for sulfur and metals in the ore fluids. Mixing of the Cu- and Au-rich fluids with meteoric water led to precipitation of the Cu–Au veins along NW-trending faults.The Yukeng–Banling deposit, the contemporaneous Caomen alkaline granite and Xiaokeng quartz-diorite in the SVB formed under an extensional setting, due to high-angle subduction of the paleo-Pacific plate. The extensional setting facilitated the formation of Cu- and Au-rich magmas which was derived from enriched mantle and lower crust.     

Geochronology,geochemistry, Sr–Nd–Hf isotopic compositions,and petrogenetic and tectonic implications of Early Cretaceous intrusions associated with the Duolong porphyry–epithermal Cu–Au deposit,central Tibet

This article reports new zircon laser ablation-multicollector-inductively coupled plasma-mass spectrometry U–Pb and Hf isotope, whole-rock major and trace element, and Sr–Nd isotope data for mineralized and barren intrusions associated with the Duolong porphyry–epithermal copper–(gold) deposit (DPCD, a mining camp containing several individual deposits) in the western Qiangtang Terrane (QT), central Tibet. These data are used to further our understanding of the geological evolution of this region. The mineralized and barren DPCD intrusions are typical I-type granitoids that were synchronously emplaced at ca. 112.6–125.9 Ma. These igneous rocks show arc affinities that are characterized by enrichments in the light rare earth elements (La_N/Yb_N = 4.08–15.23) and the light ion lithophile elements (Rb, Th, U, K, and Pb), and depletions in the high field strength elements (Nb, Ta, and Ti). They have ⁸⁷Sr/⁸⁶Sr_(i) values of 0.7046–0.7079, _Nd(t) values of –6.0 to +1.1, and two-stage Nd model ages of ca. 823–1410 Ma. Zircons from these intrusive rocks have variable but generally positive ε_Hf(t) values (–2.7 to +13.7) and relatively young zircon Hf crustal model ages of 335–1351 Ma. Combining these data with geochemical data reported in recent studies, we infer that the mineralized and barren DPCD intrusions formed in a continental marginal arc setting and likely originated from a common parental magma that was result of magma mixing of juvenile crust-derived basaltic melts and old lower crust-derived melts. The formation of the DPCD intrusions indicates that the Bangongco–Nujiang oceanic lithosphere was still undergoing northward subduction beneath the western QT at ca. 112.6–125.9 Ma, suggesting in turn that the oceanic basin have not closed completely during the Early Cretaceous. These new data also indicate that the processes that occur during the subduction of oceanic crust in continental marginal arc settings produce and preserve juvenile crustal material, leading to net continental crust vertical growth and thickening.     

Sulfur isotope and fluid inclusion geochemistry of metamorphic Cu–Au vein deposits,central Cobar area,NSW, Australia

Vein-type, structurally controlled Cu–Au mineralisation hosted by turbidites of late Silurian to earliest Devonian age, forms an important resource close to the eastern margin of the Cobar Basin. Here we report 103 new sulfur isotope analyses, together with homogenisation temperatures and salinity data for 545 primary two-phase fluid inclusions for the mineralised zones from the central area of the Cobar mining district. A range in δ³⁴S values from 3.8 to 11.2‰ (average 7.9‰) is present. Sulfur is likely to have been derived from rock sulfur/sulfide in basin and basement rocks, but there may be an additional connate-derived component. Homogenisation temperatures (T_h) for inclusion fluids trapped in quartz and minor calcite veins range from near 150°C to 397°C. Fluid inclusions are characterised by a low CO₂ content and low, but variable salinities (2.1–9.1 wt% NaCl equivalent). Generations of inclusion fluids correspond to six paragenetic stages of vein quartz deposition and recrystallisation at the Chesney mine. Primary fluid inclusions in the first two stages were subjected to re-equilibration resulting from increased confining pressure. Their T_h range (151–317°C) is considered a minimum for the temperature of these fluids. Sulfide and gold deposition at Chesney appears to be related to fluids of moderately high T_h (range 270–397°C) associated with the final paragenetic stage. T_h for the ore-related fluids may be close to the solvus of the H₂O–NaCl–CO₂ system and hence near trapping temperatures. Late-stage entry of a hot, moderately saline ore-forming fluid is implicated as the origin of the Cu–Au mineralisation. However, comparison with geochemical data for the vein-style Zn–Pb–Ag deposits at Cobar demonstrates that differences in metal content for individual zones cannot be attributed to major differences in fluid temperature or salinity. Rather, these differences are probably due to variations in source-rock reservoirs and structural pathways along which the ore-forming fluids moved.     

Late Cretaceous porphyry Cu and epithermal Cu–Au association in the Southern Panagyurishte District,Bulgaria: the paired Vlaykov Vruh and Elshitsa deposits

Vlaykov Vruh–Elshitsa represents the best example of paired porphyry Cu and epithermal Cu–Au deposits within the Late Cretaceous Apuseni–Banat–Timok–Srednogorie magmatic and metallogenic belt of Eastern Europe. The two deposits are part of the NW trending Panagyurishte magmato-tectonic corridor of central Bulgaria. The deposits were formed along the SW flank of the Elshitsa volcano-intrusive complex and are spatially associated with N110-120-trending hypabyssal and subvolcanic bodies of granodioritic composition. At Elshitsa, more than ten lenticular to columnar massive ore bodies are discordant with respect to the host rock and are structurally controlled. A particular feature of the mineralization is the overprinting of an early stage high-sulfidation mineral assemblage (pyrite ± enargite ± covellite ± goldfieldite) by an intermediate-sulfidation paragenesis with a characteristic Cu–Bi–Te–Pb–Zn signature forming the main economic parts of the ore bodies. The two stages of mineralization produced two compositionally different types of ores—massive pyrite and copper–pyrite bodies. Vlaykov Vruh shares features with typical porphyry Cu systems. Their common geological and structural setting, ore-forming processes, and paragenesis, as well as the observed alteration and geochemical lateral and vertical zonation, allow us to interpret the Elshitsa and Vlaykov Vruh deposits as the deep part of a high-sulfidation epithermal system and its spatially and genetically related porphyry Cu counterpart, respectively. The magmatic–hydrothermal system at Vlaykov Vruh–Elshitsa produced much smaller deposits than similar complexes in the northern part of the Panagyurishte district (Chelopech, Elatsite, Assarel). Magma chemistry and isotopic signature are some of the main differences between the northern and southern parts of the district. Major and trace element geochemistry of the Elshitsa magmatic complex are indicative for the medium- to high-K calc-alkaline character of the magmas. ⁸⁷Sr/⁸⁶Sr_(i) ratios of igneous rocks in the range of 0.70464 to 0.70612 and ¹⁴³Nd/¹⁴⁴Nd_(i) ratios in the range of 0.51241 to 0.51255 indicate mixed crustal–mantle components of the magmas dominated by mantellic signatures. The epsilon Hf composition of magmatic zircons (+6.2 to +9.6) also suggests mixed mantellic–crustal sources of the magmas. However, Pb isotopic signatures of whole rocks (²⁰⁶Pb/²⁰⁴Pb = 18.13–18.64, ²⁰⁷Pb/²⁰⁴Pb = 15.58–15.64, and ²⁰⁸Pb/²⁰⁴Pb = 37.69–38.56) along with common inheritance component detected in magmatic zircons also imply assimilation processes of pre-Variscan and Variscan basement at various scales. U–Pb zircon and rutile dating allowed determination of the timing of porphyry ore formation at Vlaykov Vruh (85.6 ± 0.9 Ma), which immediately followed the crystallization of the subvolcanic dacitic bodies at Elshitsa (86.11 ± 0.23 Ma) and the Elshitsa granite (86.62 ± 0.02 Ma). Strontium isotope analyses of hydrothermal sulfates and carbonates (⁸⁷Sr/⁸⁶Sr = 0.70581–0.70729) suggest large-scale interaction between mineralizing fluids and basement lithologies at Elshitsa–Vlaykov Vruh. Lead isotope compositions of hydrothermal sulfides (²⁰⁶Pb/²⁰⁴Pb = 18.432–18.534, ²⁰⁷Pb/²⁰⁴Pb = 15.608–15.647, and ²⁰⁸Pb/²⁰⁴Pb = 37.497–38.630) allow attribution of ore-formation in the porphyry and epithermal deposits in the Southern Panagyurishte district to a single metallogenic event with a common source of metals.