Thermodynamic properties of andradite and application to skarn with coexisting andradite and hedenbergite

The enthalpy of formation of andradite (Ca₃Fe₂Si₃O₁₂) has been estimated as-5,769.700 (±5) kJ/mol from a consideration of the calorimetric data on entropy (316.4 J/mol K) and of the experimental phaseequilibrium data on the reactions: 1 $$\begin{gathered} 9/2 CaFeSi_2 O_6 + O_2 = 3/2 Ca_3 Fe_2 Si_3 O_{12} + 1/2 Fe_3 O_4 + 9/2 SiO_2 (a) \hfill \\ Hedenbergite andradite magnetite quartz \hfill \\ \end{gathered} $$ 1 $$\begin{gathered} 4 CaFeSi_2 O_6 + 2 CaSiO_3 + O_2 = 2 Ca_3 Fe_2 Si_3 O_{12} + 4 SiO_2 (b) \hfill \\ Hedenbergite wollastonite andradite quartz \hfill \\ \end{gathered} $$ 1 $$\begin{gathered} 18 CaSiO_3 + 4 Fe_3 O_4 + O_2 = 6Ca_3 Fe_2 Si_3 O_{12} (c) \hfill \\ Wollastonite magnetite andradite \hfill \\ \end{gathered} $$ 1 $$\begin{gathered} Ca_3 Fe_2 Si_3 O_{12} = 3 CaSiO_3 + Fe_2 O_3 . (d) \hfill \\ Andradite pseudowollastonite hematite \hfill \\ \end{gathered} $$ and $$log f_{O_2 } = E + A + B/T + D(P - 1)/T + C log f_{O_2 } .$$ Oxygen-barometric scales are presented as follows: $$\begin{gathered} E = 12.51; D = 0.078; \hfill \\ A = 3 log X_{Ad} - 4.5 log X_{Hd} ; C = 0; \hfill \\ B = - 27,576 - 1,007(1 - X_{Ad} )^2 - 1,476(1 - X_{Hd} )^2 . \hfill \\ \end{gathered} $$ For the assemblage andradite (Ad)-hedenbergite (Hd)-magnetite-quartz: $$\begin{gathered} E = 13.98; D = 0.0081; \hfill \\ A = 4 log(X_{Ad} / X_{Hd} ); C = 0; \hfill \\ B = - 29,161 - 1,342.8(1 - X_{Ad} )^2 - 1,312(1 - X_{Hd} )^2 . \hfill \\ \end{gathered} $$ For the assemblage andradite-hedenbergite-wollastonite-quartz: 1 $$\begin{gathered} E = 13.98;{\text{ }}D = 0.0081; \hfill \\ A = 4\log (X_{Ad} /X_{Hd} );{\text{ C = 0;}} \hfill \\ B = - 29,161 - 1,342.8(1 - X_{Ad} )^2 - 1,312(1 - X_{Hd} )^2 . \hfill \\ \end{gathered} $$ For the assemblage andradite-hedenbergite-calcitequartz: 1 $$\begin{gathered} E = - 1.69;{\text{ }}D = - 0.199; \hfill \\ A = 4\log (X_{Ad} /X_{Hd} );{\text{ C = 2;}} \hfill \\ B = - 20,441 - 1,342.8(1 - X_{Ad} )^2 - 1,312(1 - X_{Hd} )^2 . \hfill \\ \end{gathered} $$ For the assemblage andradite-hedenbergite-wollastonite-calcite: 1 $$\begin{gathered} E = - 17.36;{\text{ }}D = - 0.403; \hfill \\ A = 4\log (X_{Ad} /X_{Hd} );{\text{ C = 4;}} \hfill \\ B = - 11,720 - 1,342.8(1 - X_{Ad} )^2 - 1,312(1 - X_{Hd} )^2 \hfill \\ \end{gathered} $$ The oxygen fugacity of formation of those skarns where andradite and hedenbergite assemblage is typical can be calculated by using the above equations. The oxygen fugacity of formation of this kind of skarn ranges between carbon dioxide/graphite and hematite/magnetite buffers. It increases from the inside zones to the outside zones, and appears to decrease with the ore-types in the order Cu, Pb?Zn, Fe, Mo, W(Sn) ore deposits.     

High temperature calorimetry of sulfide systems

The standard enthalpies of formation of FeS (troilite), FeS₂ (pyrite), Co_0.9342S, Co₃S₄ (linnaeite), Co₉S₈ (cobalt pentlandite), CoS₂ (cattierite), CuS (covellite), and Cu₂S (chalcocite) have been determined by high temperature direct reaction calorimetry at temperatures between 700 K and 1021 K. The following results are reported: $$\Delta {\rm H}_{f,FeS}^{tr} = - 102.59 \pm 0.20kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,FeS}^{py} = - 171.64 \pm 0.93kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Co_{0.934} S} = - 99.42 \pm 1.52kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Co_9 S_8 }^{ptl} = - 885.66 \pm 16.83kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Co_3 S_4 }^{In} = - 347.47 \pm 7.27kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,CoS_2 }^{ct} = - 150.94 \pm 4.85kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Cu_2 S}^{cc} = - 80.21 \pm 1.51kJ mol^{ - 1} ,$$ and $$\Delta {\rm H}_{f,CuS}^{cv} = - 53.14 \pm 2.28kJ mol^{ - 1} ,$$ The enthalpy of formation of CuFeS₂ (chalcopyrite) from (CuS+FeS) and from (Cu+FeS₂) was determined by solution calorimetry in a liquid Ni_0.60S_0.40 melt at 1100 K. The results of these measurements were combined with the standard enthalpies of formation of CuS, FeS, and FeS₂, to calculate the standard enthalpy of formation of CuFeS₂. We found \(\Delta {\rm H}_{f,CuFeS_2 }^{ccp} = - 194.93 \pm 4.84kJ mol^{ - 1}\) . Our results are compared with earlier data given in the literature; generally the agreement is good and our values agree with previous estimates within the uncertainties present in both.     

Thermal expansion and spontaneous strain associated with the normal-incommensurate phase transition in melilites

The linear thermal expansions of åkermanite (Ca₂MgSi₂O₇) and hardystonite (Ca₂ZnSi₂O₇) have been measured across the normal-incommensurate phase transition for both materials. Least-squares fitting of the high temperature (normal phase) data yields expressions linear in T for the coefficients of instantaneous linear thermal expansion, $$\alpha _1 = \frac{1}{l}\frac{{dl}}{{dT}}$$ for åkermanite: $$\begin{gathered} \alpha _{[100]} = 6.901(2) \times 10^{ - 6} + 1.834(2) \times 10^{ - 8} T \hfill \\ \alpha _{[100]} = - 2.856(1) \times 10^{ - 6} + 11.280(1) \times 10^{ - 8} T \hfill \\ \end{gathered} $$ for hardystonite: $$\begin{gathered} \alpha _{[100]} = 15.562(5) \times 10^{ - 6} - 1.478(3) \times 10^{ - 8} T \hfill \\ \alpha _{[100]} = - 11.115(5) \times 10^{ - 6} + 11.326(3) \times 10^{ - 8} T \hfill \\ \end{gathered} $$ Although there is considerable strain for temperatures within 10° C of the phase transition, suggestive of a high-order phase transition, there appears to be a finite ΔV of transition, and the phase transition is classed as “weakly first order”.     

The concept of geochemical potential field exemplified by ore formation field

Geochemical potential field is defined as the scope within the earth’s space where a given component in a certain phase of a certain material system is acted upon by a diffusion force, depending on its spatial coordinatesX, Y andZ. The three coordinates follow the relations: $$NF_{ix} = - \frac{{\partial \mu }}{{\partial x}}, NF_{iy} = - \frac{{\partial \mu }}{{\partial y}}, NF_{iz} = - \frac{{\partial \mu }}{{\partial z}}$$ The characteristics of such a field can be summarized as: (1) The summation of geochemical potentials related to the coordinatesX, Y, Z, or pseudo-velocity head, pseudo-pressure head and pseudo-potential head of a certain component in the earth is a constant as given by $$\mu _x + \mu _y + \mu _z = c$$ or $$\mu _{x2} + \mu _{y2} + \mu _{z2} = \mu _{x1} + \mu _{y1} + \mu _{z1} $$ Derived from these relations is the principle of geochemical potential conservation. The following relations have the same physical significance: $$\mu _k + \mu _u + \mu _p = c$$ or $$\mu _{k2} + \mu _{u2} + \mu _{p2} = \mu _{k1} + \mu _{u1} + \mu _{p1} $$ (2) Geochemical potential field is a vector field quantified by geochemical field intensity which is defined as the diffusion force applied to one molecular volume (or one atomic volume) of a certain component moving from its higher concentration phase to lower concentration phase. The geochemical potential field intensity is given by $$\begin{gathered} E = - grad\mu \hfill \\ E = \frac{{RT}}{x}i + \frac{{RT}}{y}j + \frac{{RT}}{z}K \hfill \\ \end{gathered} $$ The present theory has been inferred to interpret the mechanism of formation of some tungsten ore deposits in China.     

WASP-121b Secondary Eclipses Revisited Using TESS Observation

Astronomy Reports - We present the detection and characterization of the ultrahot Jupiter WASP-121b ( $${{R}_{p}} \simeq 1.865{\kern 1pt} {{R}_{J}}$$ , $${{M}_{p}} \simeq 1.184{\kern 1pt}...     

Multi-Brid DBI Inflation

Astronomy Reports - It is shown that it is possible to extend the application of $$\delta \mathcal{N}$$ formalism to some special separable non-canonic cases. In this work, we extended the...     

The experimental investigation of the reactions MnCO3+SiO2=MnSiO37#x002B;CO2 and MnSiO3+MnCO3=Mn2SiO4+CO2 in CO2/H2O gasmixtures at a total pressure of 500 bars

The equilibrium constants for the reaction (2) Rhodochrosite + Quartz=Pyroxmangite+CO₂ obtained are:logK(₂)(bars)= $$\begin{gathered}{\text{log}}f_{co_2 } = - \frac{{(9862 \pm 102)}}{T} \hfill \\+ (15.887 \pm 0.220) + (0.1037 \pm 0.0020)\frac{{P - 1}}{T} \hfill \\\end{gathered} $$ and for the reaction (3) Rhodochrosite+Pyroxmangite=Tephroite+CO₂: logK(₃)(bars)= $$\begin{gathered}{\text{log}}f_{co_2 } = - \frac{{(6782 \pm 205)}}{T} \hfill \\+ (11.296 \pm 0.304) + (0.0835 \pm 0.0030)\frac{{P - 1}}{T} \hfill \\\end{gathered} $$ The present data lie within reasonable limits of error of the values calculated from previous experimental results at P _tot = 2000 bars.     

Norm of the Position Shift of a Celestial Body in a Dynamical Astronomy Problem

The averaging method is widely used in celestial mechanics, in which a mean orbit is introduced and slightly deviates from an osculating one, as long as disturbing forces are small. The difference $$\delta {\mathbf{r}}$$ in the celestial body positions in the mean and osculating orbits is a quasi-periodic function of time. Estimating the norm $$\left\| {\delta {\mathbf{r}}} \right\|$$ for deviation is interesting to note. Earlier, the exact expression of the mean-square norm for one problem of celestial mechanics was obtained: a zero-mass point moves under the gravitation of a central body and a small perturbing acceleration $${\mathbf{F}}$$. The vector $${\mathbf{F}}$$ is taken to be constant in a co-moving coordinate system with axes directed along the radius vector, the transversal, and the angular momentum vector. Here, we solved a similar problem, assuming the vector $${\mathbf{F}}$$ to be constant in the reference frame with axes directed along the tangent, the principal normal, and the angular momentum vector. It turned out that $${{\left\| {\delta {\mathbf{r}}} \right\|}^{2}}$$ is proportional to $${{a}^{6}}$$, where $$a$$ is the semi-major axis. The value $${{\left\| {\delta {\mathbf{r}}} \right\|}^{2}}{{a}^{{ - 6}}}$$ is the weighted sum of the component squares of $${\mathbf{F}}$$. The quadratic form coefficients depend only on the eccentricity and are represented by the Maclaurin series in even powers of $$e$$ that converge, at least for $$e < 1$$. The series coefficients are calculated up to $${{e}^{4}}$$ inclusive, so that the correction terms are of order $${{e}^{6}}$$.     

Dislocation-assisted diffusion of oxygen in albite

Oxygen diffusion in albite has been determined by the integrating (bulk ¹⁸O) method between 750° and 450° C, for a P _H2O of 2 kb. The original material has a low dislocation density (<10⁶ cm^?2), and its lattice diffusion coefficient (D ₁), given below, agrees well with previous determinations. A sample was deformed at high temperature and pressure to produce a uniform dislocation density of 5 × 10⁹ cm^?2. The diffusion coefficient (D _a) for this deformed material, given below, is about 0.5 and 0.7 orders of magnitude larger than D ₁ at 700° and 450° C, respectively. This enhancement is believed due to faster diffusion along the cores of dislocations. Assuming a dislocation core radius of 4 Å, the calculated pipe diffusion coefficient (D _p), given below, is about 5 orders of magnitude larger than D ₁. These results suggest that volume diffusion at metamorphic conditions may be only slightly enhanced by the presence of dislocations. $$\begin{gathered} D_1 = 9.8 \pm 6.9 \times 10^{ - 6} (cm^2 /\sec ) \hfill \\ {\text{ }} \cdot \exp [ - 33.4 \pm 0.6(kcal/mole)/RT] \hfill \\ \end{gathered} $$ $$\begin{gathered} D_a = 7.6 \pm 4.0 \times 10^{ - 6} (cm^2 /\sec ) \hfill \\ {\text{ }} \cdot \exp [ - 30.9 \pm 1.1(kcal/mole)/RT] \hfill \\ \end{gathered} $$ $$\begin{gathered} D_p \approx 1.2 \times 10^{ - 1} (cm^2 /\sec ) \hfill \\ {\text{ }} \cdot \exp [ - 29.8(kcal/mole)/RT]. \hfill \\ \end{gathered} $$      

Thermodynamic properties of glaucophane new data from calorimetric and spectroscopic measurements

New data concerning glaucophane are presented. New high temperature drop calorimetry data from 400 to 800 K are used to constrain the heat capacity at high temperature. Unpublished low temperature calorimetric data are used to estimate entropy up to 900 K. These data, corrected for composition, are fitted for C _p and S to the polynomial expressions (J · mol^?1 · K^?2) for T> 298.15 K: $$\begin{gathered} C_p = 11.4209 * 10^2 - 40.3212 * 10^2 /T^{{1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-\nulldelimiterspace} 2}} - 41.00068 * 10^6 /T^2 \hfill \\ + 52.1113 * 10^8 /T^3 \hfill \\ \end{gathered} $$ $$\begin{gathered} S = 539 + 11.4209 * 10^2 * \left( {\ln T - \ln 298.15} \right) - 80.6424 * 10^2 \hfill \\ * \left( {T^{ - {1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-\nulldelimiterspace} 2}} - 1/\left( {298.15} \right)^{{1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-\nulldelimiterspace} 2}} } \right) + 20.50034 * 10^6 \hfill \\ * \left( {T^{ - 2} - 1/\left( {298.15} \right)^2 } \right) - 17.3704 * 10^8 * \left( {T^{ - 3} - \left( {1/298.15} \right)^3 } \right) \hfill \\ \end{gathered} $$ IR and Raman spectra from 50 to 3600 cm^?1 obtained on glaucophane crystals close to the end member composition are also presented. These spectroscopic data are used with other data (thermal expansion, acoustic velocities etc.) in vibrational modelling. This last method provides an independent way for the determination of the thermodynamic properties (C_p and entropy). The agreement between measured and calculated properties is excellent (less than 2% difference between 100 and 1000 K). It is therefore expected that vibrational modelling could be applied to other amphiboles for which spectroscopic data are available. Finally, the enthalpy of formation of glaucophane is calculated.     

Cosmological Constraints on a Temporal Variation of the Proton-to-electron Mass Ratio based on the Red-shifted Lines of Extragalactic Argonium

Astronomy Reports - The sensitivity coefficients of the argonium ground $${{X}^{1}}{{\Sigma }^{ + }}$$ -state rotational lines with respect to the reduced molecular mass $$\mu $$ are evaluated...     

Basal slip and texture development in calcite: new results from torsion experiments

The deformation behavior of calcite has been of longstanding interest. Through experiments on single crystals, deformation mechanisms were established such as mechanical twinning on in the positive sense and slip on and both in the negative sense. More recently it was observed that at higher temperatures slip in both senses becomes active and, based on slip line analysis, it was suggested that slip may occur. So far there had been no direct evidence for basal slip, which is the dominant system in dolomite. With new torsion experiments on calcite single crystals at 900 K and transmission electron microscopy, this study identifies slip unambiguously by direct imaging of dislocations and diffraction contrast analysis. Including this slip system in polycrystal plasticity simulations, enigmatic texture patterns observed in compression and torsion of calcite rocks at high temperature can now be explained, resolving a long-standing puzzle.     

Thermochemical and pressure-volume-temperature systematics of data on solids,examples: Tungsten and MgO

Data systematization using the constraints from the equation $$Cp = Cv + \alpha _P {}^2V_T K_T T$$ where C _p, C _v, α _p, K _T and V are respectively heat capacity at constant pressure, heat capacity at constant volume, isobaric thermal expansion, isothermal bulk modulus and molar volume, has been performed for tungsten and MgO. The data are $$K_T (W) = 1E - 5/(3.1575E - 12 + 1.6E - 16T + 3.1E - 20T^2 )$$ $$\alpha _P (W) = 9.386E - 6 + 5.51E - 9T$$ $$C_P (W) = 24.1 + 3.872E - 3T - 12.42E - 7T^2 + 63.96E - 11T^3 - 89000T^{ - 2} $$ $$K_T (MgO) = 1/(0.59506E - 6 + 0.82334E - 10T + 0.32639E - 13T^2 + 0.10179E - 17T^3 $$ $$\alpha _P (MgO) = 0.3754E - 4 + 0.7907E - 8T - 0.7836/T^2 + 0.9148/T^3 $$ $$C_P (MgO) = 43.65 + 0.54303E - 2T - 0.16692E7T^{ - 2} + 0.32903E4T^{ - 1} - 5.34791E - 8T^2 $$ For the calculation of pressure-volume-temperature relation, a high temperature form of the Birch-Murnaghan equation is proposed $$P = 3K_T (1 + 2f)^{5/2} (1 + 2\xi f)$$ Where $$K_T = 1/(b_0 + b_1 T + b_2 T^2 + b_3 T^3 )$$ $$f = (1/2)\{ [V(1,T)/V(P,T)]^{2/3} - 1\} $$ $$\xi = ({3 \mathord{\left/ {\vphantom {3 4}} \right. \kern-\nulldelimiterspace} 4})[K'_0 + K'_1 \ln ({T \mathord{\left/ {\vphantom {T {300}}} \right. \kern-\nulldelimiterspace} {300}}) - 4]$$ where in turn $$V(1,T) = V_0 [\exp (\int\limits_{300}^T {\alpha dT)]} $$ . The temperature dependence of the pressure derivative of the bulk modulus (K′₁) is estimated by using the shock-wave data. For tungsten the data are K′₀ = 3.5434, K′₁ = 0.032; for MgO K′₀ = 4.17 and K′₁ = 0.1667. For calculating the Gibbs free energy of a solid at high pressure and at temperatures beyond that of melting at 1 atmosphere, it is necessary to define a high-temperature reference state for the fictive solid.     

The reversed alumina contents of orthopyroxene in equilibrium with spinel and forsterite in the system MgO-Al2O3-SiO2

Equilibrium alumina contents of orthopyroxene coexisting with spinel and forsterite in the system MgO-Al₂O₃-SiO₂ have been reversed at 15 different P-T conditions, in the range 1,030–1,600° C and 10–28 kbar. The present data and three reversals of Danckwerth and Newton (1978) have been modeled assuming an ideal pyroxene solid solution with components Mg₂Si₂O₆ (En) and MgAl₂SiO₆ (MgTs), to yield the following equilibrium condition (J, bar, K): $$\begin{gathered} RT{\text{ln(}}X_{{\text{MgTs}}} {\text{/}}X_{{\text{En}}} {\text{) + 29,190}} - {\text{13}}{\text{.42 }}T + 0.18{\text{ }}T + 0.18{\text{ }}T^{1.5} \hfill \\ + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP = 0,} \hfill \\ \end{gathered} $$ where $$\begin{gathered} + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP} \hfill \\ = [0.013 + 3.34 \times 10^{ - 5} (T - 298) - 6.6 \times 10^{ - 7} P]P. \hfill \\ \end{gathered} $$ The data of Perkins et al. (1981) for the equilibrium of orthopyroxene with pyrope have been similarly fitted with the result: $$\begin{gathered} - RT{\text{ln(}}X_{{\text{MgTs}}} \cdot X_{{\text{En}}} {\text{) + 5,510}} - 88.91{\text{ }}T + 19{\text{ }}T^{1.2} \hfill \\ + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP = 0,} \hfill \\ \end{gathered} $$ where $$\begin{gathered} + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP} \hfill \\ = [ - 0.832 - 8.78{\text{ }} \times {\text{ 10}}^{ - {\text{5}}} (T - 298) + 16.6{\text{ }} \times {\text{ 10}}^{ - 7} P]{\text{ }}P. \hfill \\ \end{gathered} $$ The new parameters are in excellent agreement with measured thermochemical data and give the following properties of the Mg-Tschermak endmember: $$H_{f,970}^0 = - 4.77{\text{ kJ/mol, }}S_{298}^0 = 129.44{\text{ J/mol}} \cdot {\text{K,}}$$ and $$V_{298,1}^0 = 58.88{\text{ cm}}^{\text{3}} .$$ The assemblage orthopyroxene+spinel+olivine can be used as a geothermometer for spinel lherzolites, subject to a choice of thermodynamic mixing models for multicomponent orthopyroxene and spinel. An ideal two-site mixing model for pyroxene and Sack's (1982) expressions for spinel activities provide, with the present experimental calibration, a geothermometer which yields temperatures of 800° C to 1,350° C for various alpine peridotites and 850° C to 1,130° C for various volcanic inclusions of upper mantle origin.     

Crystal chemical controls on rare earth element partitioning between epidote-group minerals and melts: an experimental and theoretical study

We have experimentally determined the partitioning of REE (rare earth elements) between zoisite and hydrous silicate melt at 1,100 °C and 3 GPa. All REE behave moderately compatible in zoisite with respect to the melt and all show a smooth parabolic dependence on ionic radius. The partitioning parabola peaks at Nd , and the compatibility slightly decreases towards La and decreases by half an order of magnitude towards Yb . Application of the elastic strain model of Blundy and Wood (1994) to the available zoisite and allanite REE mineral/melt partitioning data and comparison with partitioning pattern calculated from a combination of structural and physical data (taken from the literature) with the elastic strain model suggest that in zoisite REE prefer the A1-site and that only La and Ce are incorporated into the A2-site in significant amounts. In contrast, in allanite, all REE are preferentially incorporated into the large and highly co-ordinated A2 site. As a result, zoisite fractionates the MREE effectively from the HREE and moderately from the LREE, while allanite fractionates the LREE very effectively from the MREE and HREE. Consequently, the presence of either zoisite or allanite during slab melting will lead to quite different REE pattern in the produced melt.Editorial responsibility: J. Hoefs     

Central Field Motion with Perturbing Acceleration Varying According to the Inverse Square Law in the Reference Frame Associated with the Radius Vector

Astronomy Reports - The motion of a point with zero mass under the action of attraction to the central body $$\mathcal{S}$$ and perturbing acceleration $${\mathbf{P}}{\kern 1pt} ' =...     

Oxygen isotope fractionation between rutile and water

Synthetic rutile-water fractionations (1000 ln α) at 775, 675, and 575° C were found to be ?2.8, ?3.5, and ?4.8, respectively. Partial exchange experiments with natural rutile at 575° C and with synthetic rutile at 475° C failed to yield reliable fractionations. Isotopic fractionation within the range 575–775° C may be expressed as follows: 1 $$1000\ln \alpha ({\rm T}i{\rm O}_{2 } - H_2 O) = - 4.1 \frac{{10^6 }}{{T_{k^2 } }} + 0.96$$ . Combined with previously determined quartz-water fractionations, the above data permit calibration of the quartz-rutile geothermometer: 1 $$1000\ln \alpha ({\text{S}}i{\rm O}_{2 } - Ti{\rm O}_{2 } ) = 6.6 \frac{{10^6 }}{{T_{k^2 } }} - 2.9$$ . When applied to B-type eclogites from Europe, as an example, the latter equation yields a mean equilibration temperature of 565° C.     

Central Field Motion with Variation of Perturbing Acceleration According to the Inverse Square Law in a Reference Frame Associated with the Velocity Vector

Astronomy Reports - A problem is considered in which a zero-mass point moves under the attraction of the central body&nbsp; $$\mathcal{S}$$ and perturbing acceleration $${\mathbf{P}}{\kern 1pt}...     

Young Stellar Complexes in the Giant Galaxy UGC 11973

We present results of the analysis of photometric and spectroscopic observations of the young stellar complexes in the late giant spiral galaxy UGC 11973. Photometric analysis in the $$UBVRI$$ bands have been carried out for the 13 largest complexes. For one of them, metallicity of the surrounding gas $$Z = 0.013 \pm 0.005$$ , the mass $$M = (4.6 \pm 1.6) \times {{10}^{6}}{\kern 1pt} {{M}_{ \odot }}$$ , and the age of the stellar complex $$t = (2.0 \pm 1.1) \times {{10}^{6}}$$ yr were evaluated, using spectroscopic data. It is shown that all complexes are massive ( $$M \geqslant 1.7 \times {{10}^{5}}{\kern 1pt} {{M}_{ \odot }}$$ ) stellar groups younger than $$3 \times {{10}^{8}}$$ yr.