Fluid Inclusions of Calcite and Sources of Ore-forming Fluids in the Huize Zn-Pb-(Ag-Ge) District, Yunnan, China

The Huize Zn-Pb- (Ag-Ge) district is a typical representative of the well-known medium-to large-sized carbonate-hosted Zn-Pb- (Ag-Ge) deposits, occurring in the Sichuan-Yunnan-Guizhou Pb-Zn Ore-forming Zone. Generally, fluid inclusions within calcite, one of the major gangue minerals, are dominated by two kinds of small (1-10 um) inclusions including pure-liquid and liquid. The inclusions exist in concentrated groups along the crystal planes of the calcite. The ore-forming fluids containing Pb and Zn, which belong to the Na+-K+-Ca2+-Cl--F--SO42- type, are characterized by temperatures of 164-221℃, medium salinity in 5-10.8 wt% NaCl, and medium pressure at 410×105 to 661×105 Pa. The contents of Na+-K+ and C1--F-, and ratios of Na+/K+-Cl-/F- in fluid inclusions present good linearity. The ratios of Na+/K+ (4.66-6.71) and Cl-/F- (18.21-31.04) in the fluid inclusions of calcite are relatively high, while those of Na+/K+ (0.29-5.69) and Cl-/F- (5.00-26.0) in the inclusions of sphalerite and pyrite are rela     

Geochemical Characteristics and Sources of Ore-forming Fluids of the Mayuan Pb-Zn Deposit, Nanzheng, Shaanxi, China

The Mayuan stratabound Pb-Zn deposit in Nanzheng,Shaanxi Province,is located in the northern margin of the Yangtze Plate,in the southern margin of the Beiba Arch.The orebodies are stratiform and hosted in breciated dolostone of the Sinian Dengying Formation.The ore minerals are primarily sphalerite and galena,and the gangue minerals comprise of dolomite,quartz,barite,calcite and solid bitumen.Fluid inclusions from ore-stage quartz and calcite have homogenization tempreatures from 98 to 337℃ and salinities from 7.7 wt%to 22.2 wt%(NaCl equiv.).The vapor phase of the inclusions is mainly composed of CH_4 with minor CO_2 and H_2S.The δD_(fluid) values of fluid inclusions in quartz and calcite display a range from-68‰ to-113‰(SMOW),and the δ~(18)O_(fluid)values calculated from δ~(18)O_(quartz) and δ~(18)O_(calcite) values range from 4.5‰ to 16.7‰(SMOW).These data suggest that the ore-forming fluids may have been derived from evaporitic sea water that had reacted with organic matter.The δ~(13)C_(CH4) values of CH_4 in fluid inclusions range from-37.2‰ to-21.0‰(PDB),suggesting that the CH_4 in the ore-forming fluids was mainly derived from organic matter.This,together with the abundance of solid bitumen in the ores,suggest that organic matter played an important role in mineralization,and that the thermochemical sulfate reduction(TSR) was the main mechanism of sulfide precipitation.The Mayuan Pb-Zn deposit is a carbonate-hosted epigenetic deposit that may be classified as a Mississippi Valley type(MVT) deposit.     

Indium Enrichment in the Meng'entaolegai Ag-Pb-Zn Deposit, Inner Mongolia, China

Abstract. The Meng'entaolegai In-rich Ag-Pb-Zn deposit is located in the eastern part of Inner Mongolia. It is one of the In-richest deposits in China. Large amounts of quartz and sulfide minerals constitute a hydrothermal quartz-sulfide vein deposit within a Hercynian acidic granite massif, which occupies an area of about 400 km². Thirty-six orebodies, controlled strictly by the E-W trend faults, are found in the orefield of 6 km in length from east to west and 200 to 1,000 m in width from south to north. The ore minerals are mainly galena, sphalerite and pyrite, and subordinate chalcopyrite, arsenopyrite, cassiterite and stannite with many Ag-minerals. The gangue minerals are mainly quartz, calcite, sericite and chlorite. Economic components of the deposit are dominated by Pb andZn (reserves of Pb and Zn are 0.17 Mt and 0.37 Mt, and their grades are 1 % and 2.3 %, respectively), with Ag, Sn, In and Cd (1,800 t Ag, >2,000 t Sn, >500 t In and 1,800 t Cd) as by-products. Indium is highly enriched in ores and its contents are 9 to 295 ppm in ores and 85 to 2,660 ppm in sphalerite. Analytical results show that the ore-forming fluid of this deposit contains 0.8–3.5 ppm In and 4–36 ppm Sn, and the two elements show a very good positive correlation with a correlation coefficient of 0.8672, while the correlation between In and Zn in the ore-forming fluids, with a correlation coefficient of 0.5723, is not as good as that between In and Sn. This indicates that indium has an affinity with tin in the ore-forming fluids. The authors think that this is probably the main reason why those In-rich deposits spread over the world are simultaneously enriched in tin.     

Noble Gas and Stable Isotopic Constraints on the Origin of the Ag–Cu Polymetallic Ore Deposits in the Baiyangping Area,Yunnan Province,SW China

The Lanping basin, Yunnan province, SW China, is located at the juncture of the Eurasian and Indian Plates in the eastern part of the Tibetan Plateau. The Lanping basin, in the Sanjiang Tethyan metallogenic province, is a significant Cu–Ag–Zn–Pb mineralized belt in China that includes the largest sandstone‐hosted Zn–Pb deposit in the world, the Jinding deposit, as well as several Ag–Cu deposits (the Baiyangping and Jinman deposits). These deposits, with total reserves of over 16.0 Mt Pb + Zn, 0.6 Mt Cu, and 7,000 t Ag, are mainly hosted in Meso‐Cenozoic clastic rocks and are dominantly controlled by two Cenozoic thrust systems developed in the western and eastern segments of the basin. The Baiyangping, Babaoshan, and Hetaoqing ore deposits are representative of the epithermal base metal deposits in the Lanping basin. The microthermometric data show that the ore‐forming fluids for these deposits were low temperature (110–180 °C) and had bimodal distribution of salinity at moderate and mid to high salinities (approximately 2–8 wt.% and 18–26 wt.% NaCl equivalent). The C and O isotope data indicate that the ore‐forming fluids were related to hot basin brines. We present new He and Ar isotope data on volatiles released from fluid inclusions contained in sulfides and in barite in these three deposits. ³He/⁴He ratios of the ore‐forming fluids are 0.01 to 0.14 R/Ra with a mean of 0.07 Ra (where R is the ³He/⁴He ratio and Ra is the ratio for atmospheric helium). This mean value is intermediate to typical ³He/⁴He ratios for the crust (R/Ra = 0.01 to 0.05) and the ratio for air‐saturated water (R/Ra = 1). The mean ratio is also significantly lower than the ratios found for mantle‐derived fluids (R/Ra = 6 to 9). The ⁴⁰Ar/³⁶Ar ratios of the ore‐forming fluids range from 298 to 382 with a mean of 323. This value is slightly higher than that for the air‐saturated water (295.5). The ³He/⁴He ratios of fluids from the fluid inclusions imply that the ore‐forming fluid for the Baiyangping, Babaoshan, and Hetaoqing deposits was derived from the crust and that any mantle‐derived He was negligible. The content of the radiogenic Ar ranges between 0.2 to 20.4%, and the proportion of air‐derived ⁴⁰Ar averages 94.1%. This indicates that atmospheric Ar was important in the formation of these deposits but that some radiogenic ⁴⁰Ar was derived from crustal rocks. Based on these observations coupled with other geochemical evidence, we suggest that the ore‐forming fluids responsible for the formation of the Ag–Cu–Pb–Zn polymetallic ore deposits in the Baiyangping area of the Lanping basin were mainly derived from crustal fluids. The fluids may have mixed with some amount of air‐saturated water, but there was no significant involvement of mantle‐derived fluids.     

REE and C-O Isotopic Geochemistry of Calcites from the World-class Huize Pb-Zn Deposits, Yunnan, China: Implications for the Ore Genesis

<正>The world-class Huize Pb-Zn deposits of Yunnan province,in southwestern China,located in the center of the Sichuan-Yunnan-Guizhou Pb-Zn polymetallic metallogenic province,has Pb+Zn reserves of more than 5 million tons at Pb+Zn grade of higher than 25%and contains abundant associated metals,such as Ag,Ge,Cd,and Ga.The deposits are hosted in the Lower Carboniferous carbonate strata and the Permian Emeishan basalts which distributed in the northern and southwestern parts of the orefield.Calcite is the only gangue mineral in the primary ores of the deposits and can be classified into three types,namely lumpy,patch and vein calcites in accordance with their occurrence.There is not intercalated contact between calcite and ore minerals and among the three types of calcite,indicating that they are the same ore-forming age with different stages and its forming sequence is from lumpy to patch to vein calcites. This paper presents the rare earth element(REE) and C-O isotopic compositions of calcites in the Huize Pb-Zn deposits.From lumpy to patch to vein calcites,REE contents decrease as LREE/ HREE ratios increase.The chondrite-normalized REE patterns of the three types of calcites are characterized by LREE-rich shaped,in which the lumpy calcite shows(La)_N(Ce)_N(Pr)_N≈(Nd)_N with Eu/Eu~*1,the patch calcite has(La)_N(Ce)_N(Pr)_N≈(Nd)_N with Eu/Eu~*1,and the vein calcite displays(La)_N(Ce)_N(Pr)_N(Nd)_N with Eu/Eu~*1.The REE geochemistry of the three types of calcite is different from those of the strata of various age and Permian Emeishan basalt exposed in the orefield.Theδ~(13) C_(PDb) andδ~(18)O_(Smow) values of the three types of calcites vary from-3.5‰to-2.1‰and 16.7‰to 18.6‰,respectively,falling within a small field between primary mantle and marine carbonate in theδ~(13)C_(PDb) vsδ~(18)O_(Smow) diagram. Various lines of evidence demonstrate that the three types of calcites in the deposits are produced from the same source with different stages.The ore-forming fluids of the deposits resulted from crustal -mantle mixing processes,in which the mantle-derived fluid components might be formed from degassing of mantle or/and magmatism of the Permian Emeishan basalts,and the crustal fluid was mainly provided by carbonate strata in the orefield.The ore-forming fluids in the deposits were homogenized before mineralization,and the ore-forming environment varied from relatively reducing to oxidizing.     

Fluid Inclusions,Stable Isotopes,and Geochronology of the Haobugao Lead‐Zinc Deposit,Inner Mongolia,China

The Haobugao deposit, located in the southern segment of the Great Xing'an Range, is a famous skarn‐related Pb‐Zn‐(Cu)‐(Fe) deposit in northern China. The results of our fluid inclusion research indicate that garnets of the early stage (I skarn stage) contain three types of fluid inclusions (consistent with the Mesozoic granites): vapor‐rich inclusions (type LV, with V_H2O/(V_H2O + L_H2O) < 50 vol %, and the majority are 5–25 vol %), liquid‐rich two‐phase aqueous inclusions (type VL, with V_H2O/(V_H2O + L_H2O) > 50 vol %, the majority are 60–80 vol %), and halite‐bearing multiphase inclusions (type SL). These different types of fluid inclusions are totally homogenized at similar temperatures (around 320–420°C), indicating that the ore‐forming fluids of the early mineralization stage may belong to a boiling fluid system. The hydrothermal fluids of the middle mineralization stage (II, magnetite‐quartz) are characterized by liquid‐rich two‐phase aqueous inclusions (type VL, homogenization temperatures of 309–439°C and salinities of 9.5–14.9 wt % NaCl eqv.) that coexist with vapor‐rich inclusions (type LV, homogenization temperatures of 284–365°C and salinities of 5.2–10.4 wt % NaCl eqv.). Minerals of the late mineralization stage (III sulfide‐quartz stage and IV sulfide‐calcite stage) only contain liquid‐rich aqueous inclusions (type VL). These inclusions are totally homogenized at temperatures of 145–240°C, and the calculated salinities range from 2.0 to 12.6 wt % NaCl eqv. Therefore, the ore‐forming fluids of the late stage are NaCl‐H₂O‐type hydrothermal solutions of low to medium temperature and low salinity. The δD values and calculated δ¹⁸O_SMOW values of ore‐forming fluids of the deposit are in the range of ?4.8 to 2.65‰ and ?127.3‰ to ?144.1‰, respectively, indicating that ore‐forming fluids of the Haobugao deposit originated from the mixing of magmatic fluid and meteoric water. The S‐Pb isotopic compositions of sulfides indicate that the ore‐forming materials are mainly derived from underlying magma. Zircon grains from the mineralization‐related granite in the mining area yield a weighted ²⁰⁶Pb/²³⁸U mean age of 144.8 ±0.8 Ma, which is consistent with a molybdenite Re‐Os model age (140.3 ±3.4 Ma). Therefore, the Haobugao deposit formed in the Early Cretaceous, and it is the product of a magmatic hydrothermal system.     

Geology and Isotope Geochemistry of the Dongzhongla Pb–Zn Deposit in Tibet: Implications for the Origin of the Ore‐Forming Fluids and Storage Condition of Certain Metals

As a newly discovered medium‐sized deposit (proven Pb + Zn resources of 0.23 Mt, 9.43% Pb and 8.73% Zn), the Dongzhongla skarn Pb–Zn deposit is located in the northern margin of the eastern Gangdese, central Lhasa block. Based on the geological conditions in this deposit of ore‐forming fluids, H, O, C, S, Pb, Sr, and noble gas isotopic compositions were analyzed. Results show that δ¹⁸O_SMOW of quartz and calcite ranged from −9.85 to 4.17‰, and δD_SMOW ranged from −124.7 to −99.6‰ (where SMOW is the standard mean ocean water), indicating magma fluids mixed with meteoric water in ore‐forming fluids. The δ¹³C_PDB and δ¹⁸O_SMOW values of calcite range from −1.4 to −1.1‰ and from 5.3 to 15.90‰, respectively, show compositions consistent with the carbonate limestone in the surrounding rocks, implying that the carbon was primarily sourced from the dissolution of carbonate strata in the Luobadui Formation. The ore δ³⁴S composition varied in a narrow range of 2.8 to 5.7‰, mostly between 4‰ and 5‰. The total sulfur isotopic value δ³⁴S was 4.7‰ with characteristics of magmatic sulfur. The ³He/⁴He values of pyrite and galena ranged from 0.101 to 5.7 Ra, lower than those of mantle‐derived fluids (6 ± 1 Ra), but higher than those of the crust (0.01–0.05 Ra), and therefore classified as a crust–mantle mixed source. The Pb isotopic composition for ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb values of the ores were in the ranges of 18.628–18.746, 15.698–15.802, and 39.077–39.430, respectively, consistent with the Pb isotopic composition of magmatic rocks in the deposit, classified as upper‐crust lead. The ore lead was likely sourced partially from the crustal basement of the Lhasa Terrane. The initial (⁸⁷Sr/⁸⁶Sr)_i value from five sulfide samples ranged from 0.71732 to 0.72767, and associated ore‐forming fluids were mainly sourced from the partial melting of the upper‐crust materials. Pb isotopic compositions of ore sulfides from the Dongzhongla deposit are similar to that of the Yuiguila and Mengya'a deposit, indicating that they have similar sources of metal‐rich ore‐forming solution. According to basic skarn mineralogy, the economic metals, and the origin of the ore‐forming fluids, the Dongzhongla deposit was classified as a skarn‐type Pb–Zn deposit.     

广西大厂锡矿铟的地球化学特征及成因机制初探

广西大厂锡矿位于江南古陆西南缘,桂西北海西-印支期被动陆缘裂谷盆地北部的断裂凹陷盆地中,是中国重要的、以锡为主的有色金属矿床。它主要由长坡-铜坑和高峰矿床、拉么矿床、大福楼矿床和亢马矿床等组成,其铟资源量约6 000 t。文章在对长坡-铜坑矿床、高峰矿床以及拉么矿床不同类型围岩（包括花岗岩质岩石）、矿石以及不同矿床类型中矿石矿物（硫化物和氧化物）中的In、Cu、Cd、Sn、Fe、Zn等微量元素分析的基础上,结合不同类型矿床、不同矿物组合中硫化物的微量元素电子探针测试以及硫同位素分析结果,初步认为大厂锡矿岩浆源区是富铟的,在正常的沉积岩中不存在铟的初始富集;In主要赋存于闪锌矿中,与层状和块状的矿体关系密切。在成矿作用过程中,In的分布和富集对矿物组合和矿石类型具有明显的选择性。大厂铟矿的形成是富铟的岩浆源区重融产生含铟岩浆,在岩浆侵位冷却过程中,由岩浆结晶所产生的流体携带In、Cu、Fe、Zn、Sn等成矿元素从岩浆中出溶,形成含In的成矿流体。水-岩反应以及在大气降水来源流体的参与下,导致In、Cu、Fe、Zn、Sn等从成矿流体中沉淀、富集成矿。     

Geological Characteristics and Genesis of the Jiamoshan MVT Pb–Zn Deposit in the Sanjiang belt, Tibetan Plateau

The carbonate-hosted Pb–Zn deposits in the Sanjiang metallogenic belt on the Tibetan Plateau are typical of MVT Pb–Zn deposits that form in thrust-fold belts. The Jiamoshan Pb–Zn deposit is located in the Changdu area in the middle part of the Sanjiang belt, and it represents a new style of MVT deposit that was controlled by karst structures in a thrust–fold system. Such a karst-controlled MVT Pb–Zn deposit in thrust settings has not previously been described in detail, and we therefore mapped the geology of the deposit and undertook a detailed study of its genesis. The karst structures that host the Jiamoshan deposit were formed in Triassic limestones along secondary reverse faults, and the orebodies have irregular tubular shapes. The main sulfide minerals are galena, sphalerite, and pyrite that occur in massive and lamellar form. The ore-forming fluids belonged to a Mg2+–Na+–K+–SO2-4–Cl-–F-–NO-3–H2 O system at low temperatures(120–130°C) but with high salinities(19–22% NaCl eq.). We have recognized basinal brine as the source of the ore-forming fluids on the basis of their H–O isotopic compositions(-145‰ to-93‰ for δDV-SMOW and-2.22‰ to 13.00‰ for δ18 Ofluid), the ratios of Cl/Br(14–1196) and Na/Br(16–586) in the hydrothermal fluids, and the C–O isotopic compositions of calcite(-5.0‰ to 3.7‰ for δ13 CV-PDB and 15.1‰ to 22.3‰ for δ18 OV-SMOW). These fluids may have been derived from evaporated seawater trapped in marine strata at depth or from Paleogene–Neogene basins on the surface. The δ34 S values are low in the galena(-3.2‰ to 0.6‰) but high in the barite(27.1‰), indicating that the reduced sulfur came from gypsum in the regional Cenozoic basins and from sulfates in trapped paleo-seawater by bacterial sulfate reduction. The Pb isotopic compositions of the galena samples(18.3270–18.3482 for 206 Pb/204 Pb, 15.6345–15.6390 for 207 Pb/204 Pb, and 38.5503–38.5582 for 208 Pb/204 Pb) are similar to those of the regional Triassic volcanic-arc rocks that formed during the closure of the Paleo-Tethys, indicating these arc rocks were the source of the metals in the deposit. Taking into account our new observations and data, as well as regional Pb–Zn metallogenic processes, we present here a new model for MVT deposits controlled by karst structures in thrust–fold systems.     

Geology and Isotope Geochemistry of the Yinchanggou-Qiluogou Pb-Zn Deposit, Sichuan Province, Southwest China

The Yinchanggou-Qiluogou Pb-Zn deposit,located in the western Yangtze Block,southwest China,is hosted by the Upper Sinian Dengying Formation dolostone.Ore bodies occur in the Qiluogou anticline and the NS-and NNW-trending faults.Sulfide ores mainly consist of sphalerite,pyrite,galena and calcite,with subordinate dolomite and quartz.Seventeen ore bodies have been discovered to date and they have a combined 1.0 million tons of sulfide ores with average grades of 2.27wt%Zn and 6.89wt%Pb.The δD_(H2O-SMOW) and δ~(18)O_(H2O-SMOW) values of fluid inclusions in quartz and calcite samples range from-68.9‰ to-48.7‰ and 7.3‰ to 15.9‰,respectively,suggesting that H_2O in the hydrothermal fluids sourced from metamorphic water.Calcite samples have δ~(13)C_(PDB) values ranging from-6.2‰ to-4.1‰ and δ~(18)O_(SMOW) values ranging from 15.1‰ to 17.4‰,indicating C and O in the hydrothermal fluids likely derived from a mixed source of metamorphic fluids and the host carbonates.The δ~(34)S_(CDT) values of sulfide minerals range from 5.5‰ to 20.3‰,suggesting that thermal chemical reduction of sulfate minerals in evaporates were the most probable source of S in the hydrothermal fluids.The ~(206)Pb/~(204)Pb,~(207)Pb/~(204)Pb and ~(208)Pb/~(204)Pb ratios of sulfide minerals fall in the range of 18.11 to 18.40,15.66 to 15.76 and 38.25 to 38.88,respectively.The Pb isotopic data of the studied deposit plot near the upper crust Pb evolution curve and overlap with the age-corrected Proterozoic basement rocks and the Upper Sinian Dengying Formation hosting dolostone.This indicates that the Pb originated from a mixed source of the basement metamorphic rocks and the ore-hosting carbonate rocks.The ore geology and C-H-O-S-Pb isotopic data suggest that the YinchanggouQiluogou deposit is an unusual carbonate-hosted,strata-bound and epigenetic deposit that derived ore-forming materials from a mixed source of the underlying Porterozoic basements and the Sinian hosting carbonates.     

Formation of the Dongmozhazhua Pb–Zn Deposit in the Thrust‐Fold Setting of the Tibetan Plateau,China: Evidence from Fluid Inclusion and Stable Isotope Data

The Dongmozhazhua deposit, the largest Pb–Zn deposit in south Qinghai, China, is stratabound, carbonate‐hosted and associated with epigenetic dolomitization and silicification of Lower–Middle Permian—Upper Triassic limestones in the hanging walls of a Cenozoic thrust fault system. The mineralization is localized in a Cenozoic thrust‐folded belt along the northeastern edge of the Tibetan plateau, which was formed due to the India–Asia plate collision during the early Tertiary. The deposit comprises 16 orebodies with variable thicknesses (1.5–26.3 m) and lengths (160–1820 m). The ores occur as dissemination, vein, and breccia cement. The main sulfide assemblage is sphalerite + galena + pyrite + marcasite ± chalcopyrite ± tetrahedrite, and gangue minerals consist mainly of calcite, dolomite, barite, and quartz. Samples of pre‐ to post‐ore stages calcite yielded δ¹³C and δ¹⁸O values that are, respectively, similar to and lower than those yielded by the host limestones, suggesting that the calcite formed from fluids derived from carbonate dissolution. Fluid inclusions in calcite and sphalerite in the polymetallic sulfidization stage mostly comprise liquid and gas phases at room temperature, with moderate homogenization temperatures (100–140°C) and high salinities (21–28 wt% NaCl eq.). Micro‐thermometric fluid inclusion data point to polysaline brines as ore‐forming fluids. The δD and δ¹⁸O values of ore fluids, cation compositions of fluid inclusions, and geological information suggest two main possible fluid sources, namely basinal brines and evaporated seawater. The fluid inclusion data and regional geology suggest that basinal brines derived from Tertiary basins located southeast of the Dongmozhazhua deposit migrated along deep detachment zones of the regional thrust system, leached substantial base metals from country rocks, and finally ascended along thrust faults at Dongmozhazhua. There, the base‐metal‐rich basinal brines mixed with bacterially‐reduced H₂S‐bearing fluids derived from evaporated seawater preserved in the Permo–Triassic carbonate strata. The mixing of the two fluids resulted in Pb–Zn mineralization. The Dongmozhazhua Pb–Zn deposit has many characteristics that are similar to MVT Pb–Zn deposits worldwide.     

Indium Mineralization in Copper–Tin Stratiform Skarn Ores at the Saishitang–Rilonggou Ore Field,Qinghai, Northwest China

The Saishitang–Rilonggou Ore Field (SROF), which includes the Saishitang, Tongyugou, and Rilonggou ore deposits as well as other scattered occurrences, is located in the Elashan region in Qinghai Province, and is a significant Cu–Sn ore field in NW China. These ores are hosted in stratiform skarn deposits with the main metals being Cu and Sn, as well as Zn, Pb, Au, Ag, and trace elements (e.g. Ga, Ge, Se, and In). Bulk‐rock geochemical analyses of 50 ore samples from the three deposits show that In contents in the Saishitang deposit range from 0.03 to 39 ppm (average 12.7 ppm, n = 19), with 1000 In/Zn values that vary from >0.01 to 29.83 (average 4.29). Indium contents in the Tongyugou deposit vary from 7.51 to 131 ppm (average 28.37 ppm, n = 13), with 1000 In/Zn values from 0.74 to 48 (average 17.55). Finally, indium contents in the Rilonggou deposit vary from 0.73 to 120 ppm (average 36.15 ppm, n = 18), with 1000 In/Zn values from 0.33 to 47 (average 8.52). Indium is hosted mainly in sphalerite, while some other In‐bearing minerals (e.g., roquesite, stannoidite, and stannite) are present locally within the ore field. Roquesite, which replace or fill bornite, occurs in bornite‐rich ores in the Saishitang deposit. This is the first reported Chinese locality of roquesite. Based on previously reported Zn resources, a total of 136 tons of In is calculated to be hosted in the SROF, with 30, 66, and 40 tons of In attributed to the Saishitang, Tongyugou, and Rilonggou deposits, respectively. The differences in indium contents among the deposits and their respective geological histories and characteristics suggest that the origin of indium relates to volcanogenic metallogenesis in an early Permian volcano‐sedimentary basin. Based on the evaluation of In resources, future mining operations should include the recovery of indium in the Tongyugou and Rilonggou deposits.     

Cu–Mo Differential Mineralization Mechanism of the Dabate Polymetallic Deposit in Western Tianshan,NW China: Evidence from Geology,Fluid Inclusions,and Oxygen Isotope Systematics

Classic porphyry Cu–Mo deposits are mostly characterized by close temporal and spatial relationships between Cu and Mo mineralization. The northern Dabate Cu–Mo deposit is a newly discovered porphyry Cu–Mo polymetallic deposit in western Tianshan, northwest China. The Cu mineralization postdates the Mo mineralization and is located in shallower levels in the deposit, which is different from most classic porphyry Cu–Mo deposits. Detailed field investigations, together with microthermometry, laser Raman spectroscopy, and O‐isotope studies of fluid inclusions, were conducted to investigate the origin and evolution of ore‐forming fluids from the main Mo to main Cu stage of mineralization in the deposit. The results show that the ore‐forming fluids of the main Mo stage belonged to an NaCl + H₂O system of medium to high temperatures (280–310°C) and low salinities (2–4 wt% NaCl equivalent (eq.)), whereas that of the main Cu stage belonged to an F‐rich NaCl + CO₂ + H₂O system of medium to high temperatures (230–260°C) and medium to low salinities (4–10 wt% NaCl eq.). The δ¹⁸O values of the ore‐forming fluids decrease from 3.7–7.8‰ in the main Mo stage to ?7.5 to ?2.9‰ in the main Cu stage. These data indicate that the separation of Cu and Mo was closely related to a large‐scale vapor–brine separation of the early ore‐forming fluids, which produced the Mo‐bearing and Cu‐bearing fluids. Subsequently, the relatively reducing (CH₄‐rich) Mo‐bearing, ore‐forming fluids, dominantly of magmatic origin, caused mineralization in the rhyolite porphyry due to fluid boiling, whereas the relatively oxidizing (CO₂‐rich) Cu‐bearing, ore‐forming fluids mixed with meteoric water and precipitated chalcopyrite within the crushed zone at the contact between rhyolite porphyry and wall rock. We suggest that the separation of Cu and Mo in the deposit may be attributed to differences in the chemical properties of Cu and Mo, large‐scale vapor–brine separation of early ore‐forming fluids, and changes in oxygen fugacity.     

40Ar/39Ar dating,fluid inclusions and S–Pb isotope systematics of the Shabaosi gold deposit,Heilongjiang Province,China

The Shabaosi deposit is the only large lode gold deposit in the northern Great Xing'an Range. The gold ore bodies are hosted by sandstone and siltstone of the Middle Jurassic Ershi'erzhan Formation, and are controlled by three N–S‐trending altered fracture zones. The gold ore bodies are composed of auriferous quartz veinlets and altered rocks. Fluid inclusion studies indicate that the ore‐forming fluids belong to a H₂O–NaCl–CO₂–CH₄ system, with salinities between 0.83 and 8.28 wt% NaCl eq., and homogenization temperatures ranging from 180 to 320 °C. The δ³⁴S values of sulphides show a large variation from −16.9‰ to 8.5‰. The Pb isotope compositions of sulphides are characterized by a narrow range of ratios: 18.289 to 18.517 for ²⁰⁶Pb/²⁰⁴Pb, 15.548 to 15.625 for ²⁰⁷Pb/²⁰⁴Pb, and 38.149 to 38.509 for ²⁰⁸Pb/²⁰⁴Pb. The μ values range from 9.36 to 9.51. These results suggest that the ore‐forming fluids/materials were mainly of magmatic hydrothermal origin, derived from magmas produced by partial melting of the lower crust. The ⁴⁰Ar/³⁹Ar age of auriferous quartz veinlets from the Shabaosi gold deposit is about 130 Ma. The Shabaosi gold deposit has counterparts in similar orogenic gold deposits, and was formed during the post‐collisional setting of the Mongolia–Okhotsk Orogen. Copyright © 2014 John Wiley & Sons, Ltd.     

内蒙古维拉斯托锡多金属矿流体包裹体特征

大兴安岭锡矿带是中国北方唯一成型的锡多金属成矿带。新近发现的内蒙古维拉斯托锡多金属矿床位于大兴安岭南段,隶属中亚造山带东段的兴蒙造山带。该矿床为一典型的大型斑岩型热液脉型锡多金属矿床,矿区内锡矿化主要赋存于石英斑岩体顶部及其上部的石英脉中。矿床成矿阶段包括石英斑岩体内的滴状锡锌矿化阶段、石英斑岩体上部石英脉中的辉钼矿矿化阶段、石英锡石黑钨矿阶段和石英多金属硫化物阶段。流体包裹体研究结果显示：流体包裹体类型主要为气液两相包裹体,尤其是富液相包裹体,其次为含子矿物的三相包裹体。斑岩体内矿化阶段流体包裹体均一温度为324~333 ℃,盐度为6.5%~7.5% NaCleqv,密度为0.73~0.74 g/cm3;石英脉型矿化阶段包裹体均一温度为201~324 ℃,盐度为3.4%~9.9% NaCleqv,密度为0.73~0.92 g/cm3。包裹体显微测温分析结果显示该矿区成矿流体具有中高温、低盐度、中密度的特征。激光拉曼光谱分析表明,气液两相包裹体液相成分主要为H2O,气相成分主要有H2O、CO2和CH4。氢氧同位素研究结果表明该矿床石英斑岩体上部石英脉矿化阶段的成矿流体为岩浆水和大气降水混合来源,以岩浆水为主。岩浆流体与大气降水的混合以及流体演化中的降温过程是该矿床矿石沉淀的主要机制。     

Geology and D-O-C Isotope Systematics of the Tieluping Silver Deposit,Henan, China: Implications for Ore Genesis

The Tieluping silver deposit, which is sited along NE-trending faults within the high-grade metamorphic basement of the Xiong‘er terrane, is part of an important Mesozoic orogenic-type Ag-Pb and Au belt recently discovered. Ore formation includes three stages: Early (E), Middle (M) and Late (L), which include quartz-pyrite (E),polymetallic sulfides (M) and carbonates (L), respectively. The E-stage fluids are characterized by δD=-90%c,δ^13CCO2=2.0‰ and δ^18O=9‰ at 373℃, and are deeply sourced; the L-stage fluids, with δD=-70‰, δ^13C CO2=-1.3%c and δ^18O=-2‰, are shallow-sourced meteoric water; whereas the M-stage fluids, with δD=-109‰, δ^13C CO2=0.1%c and δ^18O2‰, are a mix of deep-sourced and shallow-sourced fluids. Comparisons of the D-O-C isotopic systematics of the Estage ore-forming fluids with the fluids derived from Mesozoic granites, Archean-Paleoproterozoic metamorphic basement and Paleo-Mesoproterozoic Xiong‘er Group, show that these units cannot generate fluids with the measured isotopic composition (high δ^180 and δ^13C ratios and low δD ratios) characteristic of the ore-forming fluids. This suggests that the E-stage ore-forming fluids originated from metamorphic devolatilization of a carbonate-shale-chert lithological association, locally rich in organic matter, which could correspond to the Meso-Neoproterozoic Guandaokou and Luanchuan Groups, rather than to geologic units in the Xiong‘er terrane, the lower crust and the mantle. This supports the view that the rocks of the Guandaokou and Luanchuan Groups south of the Machaoying fault might be the favorable sources. A tectonic model that combines collisional orogeny, metallogeny and hydrothermal fluid flow is proposed to explain the formation of the Tieluping silver deposit. During the Mesozoic collision between the South and North China paleocontinents, a crustal slab containing a lithological association consisting of carbonate-shale-chert, locally rich in organic matter (carbonaceous shale) was thrust northwards beneath the Xiong‘er terrane along the Machaoying fault.Metamorphic devolatilization of this underthrust slab provided the ore-forming fluids to develop the Au-Ag-(Pb-Zn) ore belt, which includes the Tieluping silver deposit.     

Characteristic Features of Tin–iron–copper Mineralization in the Anle-Huanggangliang Mining Area, Inner Mongolia, China

Abstract: The Anle Sn‐Cu and Huanggangliang Fe‐Sn deposits have been exploited in the Linxi district, which is located 165 km northwest of Chifeng City in northern China. In this study the formation mechanisms of the tin deposits in the Anle and Huanggangliang mining area were investigated to understand the mechanisms of tin mineralization in northern China. The veins of the Anle deposit are divided into cassiterite–quartz–chlorite veins, chalcopyrite‐bearing quartz veins, cassi–terite–chalcopyrite–bearing quartz veins and sphalerite‐quartz veins. The sequence of mineralization is tin mineralization (stage I), copper mineralization (stage II), and lead‐zinc mineralization (stage III). The Huanggangliang tin deposit consists of magnetite skarn orebodies and many cassiterite‐bearing feldspar–fluorite veins and veinlets cutting the magnetite orebodies. The fluid inclusions in quartz and fluorite in ores from the Anle and Huanggangliang tin deposits are divided into two‐phase fluid inclusions, vapor‐rich fluid inclusions and poly‐phase fluid inclusions. The final homogenization temperatures of fluid inclusions of quartz in the ores of the Anle deposit and fluorite of tin‐bearing feldspar veins in the Huanggangliang tin deposit range from 195 to 425C and from 215 to 450C, respectively. The fluids responsible for the Anle and Huanggangliang tin deposits were of very high temperature and NaCl‐rich ones containing K, Ca, Al, Si, Ti, Fe and Cl in addition to ore metals such as Sn and Cu. The temperature and chemical composition of fluid in fluid inclusions of igneous rocks in the mining area are very similar to those of fluid in fluid inclusions in the ores of these deposits. The fluid for these ore deposits had a close relation with the fluid coexisting with melt of Late Jurassic granitic rocks in this mining area. Salinities of fluid inclusions from these ore deposits and granitic rocks in the mining area were estimated to range from 35 to 50 wt % NaCl equivalent. Based on arsenopy‐rite geothermometry and fluid inclusion studies, a fluid containing 40 wt% NaCl (eq.) could be formed by phase separation of fluid having 6 wt% NaCl (eq.) at a temperature of 420 to 500C and a pressure of 0.3 to 0.4 kb. The temperatures and pressures presented above indicate an NaCl‐rich magmatic fluid derived from granitic melt that had intruded into a shallow level of crust caused the Sn–Fe–Cu mineralization of the mining area. The geological relationship between these ore deposits and granitic bodies around the ore deposits, and the similarity of fluids forming these ore deposits and coexisting with granitic melt, suggest that these ore deposits were formed by the activity of fluid derived from granitic melt in Late Jurassic age.     

Magmatic‐Hydrothermal Mineralization Sequence in Xinlu Ore Field,Guangxi, South China: Constraints from Zircon U‐Pb,Molybdenite Re‐Os,and Muscovite Ar‐Ar Dating

The Xinlu Sn‐polymetallic ore field is located in the western Nanling Polymetallic Belt in northeastern Guangxi, South China, where a number of typical skarn‐, hydrothermal vein‐type tin deposits have developed. There are two types of Sn deposits: skarn‐type and sulfide‐quartz vein‐type. The tin mineralizations mainly occur on the south side of the Guposhan granitic complex pluton and within its outer contact zone. To constrain the Sn mineralization age and further understand its genetic links to the Guposhan granitic complex, a series of geochronological works has been conducted at the Liuheao deposit of the ore field using high‐precision zircon SHRIMP U‐Pb, molybdenite Re‐Os, and muscovite Ar‐Ar dating methods. The results show that the biotite‐monzogranite, which is part of the Xinlu intrusive unit of the Guposhan complex pluton, has a SHRIMP U‐Pb zircon age of 161.0 ± 1.5 Ma. The skarn‐type ore has a ⁴⁰Ar‐³⁹Ar muscovite plateau age of 160 ± 2 Ma (same as its isochron age), and the sulfide‐quartz vein‐type ore yields an Re‐Os molybdenite isochron age of 154.4 ± 3.5 Ma. The magmatic‐hydrothermal geochronological sequence demonstrated that the hydrothermal mineralization took place immediately following the emplacement of the monzogranite, with the skarn metasomatic mineralization stage predating the sulfide mineralization stage. Geochronologically, we have compared this ore field with 26 typical Sn deposits distributed along the Nanling Polymetallic Belt, leading to the suggestion of the magmatic‐metallogenic processes in the Xinlu ore field (ca. 161–154 Ma) as a component of the Early Yanshanian large‐scale Sn‐polymetallic mineralization event (peaked at 160–150 Ma) in the Nanling Range of South China. Petrogenesis of Sn‐producing granite and Sn‐polymetallic mineralization were probably caused by crust–mantle interaction as a result of significant lithospheric extension and thinning in South China in the Late Jurassic.     

Fluid Inclusions and Stable Isotopic Characteristics of the Yaoling Tungsten Deposit in South China: Metallogenetic Constraints

The Yaoling tungsten deposit is a typical wolframite quartz vein‐type tungsten deposit in the South China metallogenic province. The wolframite‐bearing quartz veins mainly occur in Cambrian to Ordovician host rocks or in Mesozoic granitic rocks and are controlled by the west‐north‐west trending extensional faults. The ore mineralization mainly comprises wolframite and variable amounts of molybdenite, chalcopyrite, pyrite, fluorite, and tourmaline. Hydrothermal alteration is well developed at the Yaoling tungsten deposit, including greisenization, silicification, fluoritization, and tourmalinization. Three types of primary/pseudosecondary fluid inclusions have been identified in vein quartz, which is intimately intergrown with wolframite. These include two‐phase liquid‐rich aqueous inclusions (type I), two‐ or three‐phase CO₂‐rich inclusions (type II), and type III daughter mineral‐bearing multiphase high‐salinity aqueous inclusions. Microthermometric measurements reveal consistent moderate homogenization temperatures (peak values from 200 to 280°C), and low to high salinities (1.3–39 wt % NaCl equiv.) for the type I, type II, and type III inclusions, where the CO₂‐rich type II inclusions display trace amounts of CH₄ and N₂. The ore‐forming fluids are far more saline than those of other tungsten deposits reported in South China. The estimated maximum trapping pressure of the ore‐forming fluids is about 1230–1760 bar, corresponding to a lithostatic depth of 4.0–5.8 km. The δD_H2O isotopic compositions of the inclusion fluid ranges from ?66.7 to ?47.8‰, with δ¹⁸O_H2O values between 1.63 and 4.17‰, δ¹³C values of ?6.5–0.8‰, and δ³⁴S values between ?1.98 and 1.92‰, with an average of ?0.07‰. The stable isotope data imply that the ore‐forming fluids of the Yaoling tungsten deposit were mainly derived from crustal magmatic fluids with some involvement of meteoric water. Fluid immiscibility and fluid–rock interaction are thought to have been the main mechanisms for tungsten precipitation at Yaoling.     

Metallogenic Epoch of Nonferrous Metallic and Silver Deposits in the Jiaodong Peninsula, China and its Geological Significance

As China's most important gold-producing district,the Jiaodong Peninsula also contains copper,lead-zinc,molybdenum(tungsten),and other nonferrous metal ore deposits,but the space-time and genetic relationships with gold deposits remain uncertain.To investigate the temporal relationship between these nonferrous metal and gold ore deposits,We collected the samples from a number of nonferrous metallic and silver deposits and metallogenetic rock bodies in the eastern Jiaodong Peninsula for isotopic dating.The results show that the Re-Os isotopic model ages of the Lengjia molybdenum deposit in Rongcheng range from 114.5± 1.8 Ma to 112.6± 1.5 Ma,with an average age of 113.6± 1.6Ma;the LA-ICP-MS ~(206)Pb/~(238)U ages of 33 zircons in the sericitization porphyritic monzogranite that hosts the Tongjiazhuang silver deposit in Rongcheng range between 122 Ma and 109 Ma,with a weighted mean age of 116.04± 0.95 Ma;the LA-ICP-MS ~(206)Pb/~(238)U ages of 31 zircons in the copper metallogenic pyroxene monzodiorite that hosts the Kuangbei copper deposit in Rongcheng range from126 Ma to 106 Ma,with a weighted mean age of 116.6± 1.7 Ma;and the LA-ICP-MS ~(206)Pb/~(238)U ages of19 zircons in the pyroxene monzodiorite surrounding the Dadengge gold and multimetal deposit in Weihai range from 113 Ma to 110 Ma,with a weighted mean age of 111.7± 0.6 Ma.All these results indicate that the metallogenic ages of the silver and nonferrous metallic deposits in the Jiaodong Peninsula are in a limited range from 118 Ma to 111 Ma.Previous studies have demonstrated that the isotopic ages of gold deposits in the Jiaodong Peninsula range from 123 Ma to 110 Ma,while Weideshanian magmatism occurred between 126 Ma to 108 Ma.Both these ranges are grossly consistent with the metallogenic ages of silver and nonferrous metallic deposits in this study,suggesting that the large-scale mineralization occurred in the Early Cretaceous when magmatic activities were strong.This epoch may be linked to the lithosphere thinning and the thermo-upwelling extension in eastern China at that time.In addition,field investigation also shows that gold and nonferrous metallic deposits are distributed nearby the Weideshanian granite,with the nonferrous metallic deposits lying within or surrounding the granite pluton and the gold deposits outside the granite pluton.We propose the following mineralization scenario:In the Early Cretaceous,an intensive lithospheric extension induced partial melting and degassing of the metasomatized lithospheric mantle,which resulted in the formation of mantle-derived fluids enriched in metal elements.During the rapid process of magma ascent and intrusion,crust-derived fluids were activated by the magmatic thermal dome and served to further extract ore-forming materials from the crust.These fluids may have mixed with the mantle-derived fluid to form a crust-mantle mixing-type ore-forming fluid.The high-temperature conditions in the center or in contact with the granitic magmatic thermal dome would have been favorable for the formation of porphyry-type,skarn-type,and hydrothermal-vein-type ores,thus forming a series of Mo(W),Cu,and Pb-Zn deposits in the mid-eastern Jiaodong Peninsula.In contrast,the medium-to low-temperature conditions in the periphery of the magmatic thermal dome would have favored the deposition of gold(silver) ores under the appropriate physiochemical and structural conditions.The metallogenic epoch of the molybdenum,copper,and silver deposits,and their spatio-temporal and genetic relations to the gold deposits,as demonstrated in this study,not only provide important insights to the study of regional metallogeny,our understanding of the metallogenesis of the Jiaodong type gold deposit,and the geodynamic background of the large-scale mineralization in the Jiaodong Peninsula,but also have practical value in guiding the mineral exploration.