Reworking of deep-seated gabbros and associated contact metamorphosed paragneisses in the southeastern part of the Seiland Igneous Province, northern Norway

The Seiland Igneous Province of the North Norwegian Caledonides consists of a suite of deep-seated rift-related magmatic rocks emplaced into paragneisses during late Precambrian to Ordovician time. In the south-eastern part of the province, contact metamorphism of the paragneisses and later reworking of intrusives and associated contact aureoles have resulted in the development of three successive metamorphic stages. The contact metamorphic assemblage (M1) Opx + Grt + Qtz + Pl + Kfs + Hc + Ilm ± Crd is preserved in xenolithic rafts of paragneiss within metagabbro. Geothermobarometric calculations yield 930-960d? C and 5-6.5 kbar for the contact metamorphism. M1 was followed by cooling, accompanied by strong shearing, formation of the gneiss foliation and recrystallization at intermediate-P granulite facies conditions (M2). Stable M2 phases are Cpx + Opx + Pl +Ilm ± Hbl in metagabbro and Grt ± Sil ± Opx + Kfs + Qtz + Pl ± Bt + Ilm in host paragneiss. The M2 conditions are estimated to 700-750d? C and 5-7 kbar. A subsequent pressure increase is recorded in the M3 episode, which is associated with recrystallization in narrow ductile shear zones and secondary growth on M2 minerals. M3 is defined by the assemblages Grt + Cpx ± Opx + Pl + Ru + Qtz in metagabbro, and Grt ± Ky + Qtz + Pl ± Kfs + Bt + Ru in host paragneiss. M3 conditions are estimated to 650-700d? C and 8-10 kbar. The substantial pressure increase related to the M2 → M3 transition is interpreted to be a result of (early?) Caledonian overthrusting. Chemical zoning in cordierite and biotite suggest rapid cooling following the M3 event. The proposed P-T-t evolution implies that the tectonic evolution of the Seiland Igneous Province was long (at least 330 Ma) and complex and involved initial rifting and extension followed by crustal thickening and compression.     

High-temperature 'clockwise'P-T paths and melting in the development of regional migmatites: an example from southern Brittany, France

The Southern Brittany Migmatite Belt (SBMB), which evolved through the metamorphic peak between c. 400 Ma and c. . 370 Ma ago, consists of a heterogeneous suite of high-grade gneisses and anatectic migmatites, both metatexites and diatexites. Rare garnet-cordierite gneiss layers record evidence of an early prograde P-T path. In these rocks, growth-zoned garnet cores and a sequence of included mineral assemblages in garnet, from core to rim, of Qtz + Ilm + Ky, Pl + Ky + St + Rt + Bt and Pl + Sil + St + Rt + Bt constrain a prograde evolution during which the reactions Ilm + Ky + Qtz→ Aim + Rt, Ms + Chl→ St + Bt + Qtz + V and St + Qtz→ Grt + Sil + V were crossed. Parts of this prograde evolution are preserved as inclusion assemblages in garnet in all other rock types. In all rock types, garnet has reverse zoned rims, and garnet replacement by cordierite and/or biotite and plagioclase suggests the following reactions have occurred: Grt + Sil + Qtz→ Crd → Hc ± Ilm, Bt + Sil + Qtz → Crd ± Hc → Ilm → Kfs + V and (Na + Ca + K + Ti) + Grt → Bt + Pl + Qtz. Microstructural analysis of reaction textures in conjunction with a petrogenetic grid has enabled the construction of a tightly constrained 'clockwise' P–T path for the SBMB. The high-temperature part of the path has a steep dT/dP slope characteristic of near isothermal decompression. It is proposed that the P-T path followed by the SBMB is the result of the inversion, by overthrusting, of a back-arc basin and that such a tectonic setting may be applicable to other high-temperature migmatite terranes. The near isothermal decompression is at least partly driven by the upward (diapiric) movement of the diatexite/anatectic granite core of the SBMB.     

Liquid compositions from low-pressure experimental melting of pelitic rock from Morton Pass, Wyoming, USA

Low‐pressure crystal‐liquid equilibria in pelitic compositions are important in the formation of low‐pressure, high‐temperature migmatites and in the crystallization of peraluminous leucogranites and S‐type granites and their volcanic equivalents. This paper provides data from vapour‐present melting of cordierite‐bearing pelitic assemblages and augments published data from vapour‐present and vapour‐absent melting of peraluminous compositions, much of which is at higher pressures. Starting material for the experiments was a pelitic rock from Morton Pass, Wyoming, with the major assemblage quartz‐K feldspar‐biotite‐cordierite, approximately in the system KFMASH. A greater range in starting materials was obtained by addition of quartz and sillimanite to aliquots of this rock. Sixty‐one experiments were carried out in cold‐seal apparatus at pressures of 1–3.5 kbar (particularly 2 kbar) and temperatures from 700 to 840 °C, with and without the addition of water. In the vapour‐present liquidus relations at 2 kbar near the beginning of melting, the sequence of reactions with increasing temperature is: Qtz + Kfs + Crd + Sil + Spl + V = L; Qtz + Kfs + Crd + Spl + Ilm + V = Bt + L; and Qtz + Bt + V = Crd + Opx + Ilm + L. Vapour‐absent melting starts at about 800 °C with a reaction of the form Qtz + Bt = Kfs + Crd + Opx + Ilm + L. Between approximately 1–3 kbar the congruent melting reaction is biotite‐absent, and biotite is produced by incongruent melting, in contrast to higher‐pressure equilibria. Low pressure melts from pelitic compositions are dominated by Qtz‐Kfs‐Crd. Glasses at 820–840 °C have calculated modes of approximately Qtz₄₂Kfs₄₆Crd₁₂. Granites or granitic leucosomes with more than 10–15% cordierite should be suspected of containing residual cordierite. The low‐pressure glasses are quite similar to the higher‐pressure glasses from the literature. However, X_Mg increases from about 0.1–0.3 with increasing pressure from 1 to 10 kbar, and the low‐temperature low‐pressure glasses are the most Fe‐rich of all the experimental glasses from pelitic compositions.     

Syn-deformational migmatites and magmatic-arc metamorphism in the Xolapa Complex, southern Mexico

The Xolapa Complex (XC) is the largest plutonic and metamorphic mid‐crustal basement unit in Mexico and represents an ancient continental magmatic‐arc. A complete range from metatexite to diatexite migmatitic structures has been produced during a single high‐grade metamorphic event. However, structural relics reveal the existence of early Cpx + Pl + Qtz ± Opx and Grt + Opx + Pl + Qtz ± Cpx pre‐migmatitic metamorphic assemblages. Field relationships and microstructural observations allow us to constrain five pre‐, syn‐ and post‐migmatitic deformational phases. It is argued that migmatitic structures and minor anatectic granites were developed during ductile recumbent folding and shear structures related to the D2–D3 phases. Late post‐migmatitic ductile‐brittle deformation is evidenced by the development of NNE trending transpressional thrusting (D4), and E–W left‐lateral mylonitic shear zones (D5). Biotite‐breakdown melting in felsic rocks and amphibole‐breakdown melting in mafic rocks, as well as geothermobarometric results, indicate that metamorphism took place at temperatures from 830 to 900 °C and pressures ranging from ≥6.3 to 9.5 kbar. Late migmatitic assemblages equilibrated in the highest temperature range along a clockwise P–T path. The relationships between the large diversity of migmatitic structures and the progressive production of melt suggest that feedback relations prevailed as a time‐marker during a contractional regime. Deformation, metamorphism, and plutonism of the XC show that this terrane evolved as a north‐east‐verging thrust system with synkinematic metamorphism and partial melting, during the Late Cretaceous – Palaeogene. The tectonothermal history of XC is analogous to a Cordilleran metamorphic magmatic‐arc formed in an accretionary tectonic framework. This new model provides constraints on the exhumation mechanism and thermal evolution of southern Mexico.     

P–T–fluid evolution in the Mahalapye Complex, Limpopo high-grade terrane, eastern Botswana

Metapelites, migmatites and granites from the c. 2 Ga Mahalapye Complex have been studied for determining the P–T–fluid influence on mineral assemblages and local equilibrium compositions in the rocks from the extreme southwestern part of the Central Zone of the Limpopo high‐grade terrane in Botswana. It was found that fluid infiltration played a leading role in the formation of the rocks. This conclusion is based on both well‐developed textures inferred to record metasomatic reactions, such as Bt ? And + Qtz + (K₂O) and Bt ± Qtz ? Sil + Kfs + Ms ± Pl, and zonation of Ms | Bt + Qtz | And + Qtz and Grt | Crd | Pl | Kfs + Qtz reflecting a perfect mobility (Korzhinskii terminology) of some chemical components. The conclusion is also supported by the results of a fluid inclusion study. CO₂ and H₂O ( = 0.6) are the major components of the fluid. The fluid has been trapped synchronously along the retrograde P–T path. The P–T path was derived using mineral thermobarometry and a combination of mineral thermometry and fluid inclusion density data. The Mahalapye Complex experienced low‐pressure granulite facies metamorphism with a retrograde evolution from 770 °C and 5.5 kbar to 560 °C and 2 kbar, presumably at c. 2 Ga.     

Ultra-high-temperature metamorphism and multistage decompressional evolution of sapphirine granulites from the Palni Hill Ranges, southern India

Sapphirine granulites from a new locality in the Palni Hill Ranges, southern India, occur in a small enclave of migmatitic, highly magnesian metapelites (mg=85–72) within massive enderbitic orthogneiss. They show a variety of multiphase reaction textures that partially overprint a coarse-grained high-pressure assemblage of Bt+Opx+Ky+Grt+Pl+Qtz. The sequence of reactions as deduced from the corona and symplectite assemblages, together with petrogenetic grid considerations, records a clockwise P–T evolution with four distinct stages. (1) Equilibration of the initial high-P assemblage in deep overthickened crust (12 kbar/800–900 °C) was followed by a stage of near-isobaric heating, presumably as a consequence of input of extra heat provided by the voluminous enderbitic intrusives. During heating, kyanite was converted to sillimanite, and biotite was involved in a series of vapour-phase-absent melting reactions, which resulted in the ultra-high-temperature assemblage Opx+Crd+Kfs+Spr±Sil, Grt, Qtz, Bt, coexisting with melt (equilibration at c. 950–1000° C/11–10 kbar). (2) Subsequently, as a result of decompression of the order of 4 kbar at ultra-high temperature, a sequence of symplectite assemblages (Opx+Sil+Spr/Spr+Crd→Opx+Spr+Crd→Opx+Crd→Opx+Crd+Spl/Crd+Spl) developed at the expense of garnet, orthopyroxene and sillimanite. This stage of near-isothermal decompression implies rapid ascent of the granulites into mid-crustal levels, possibly due to extensional collapse and erosion of the overthickened crust. (3) Development of late biotite through back-reaction of melt with residual garnet indicates a stage of near-isobaric cooling to c. 875 °C at 7–8 kbar, i.e. relaxation of the rapidly ascended crust to the stable geotherm. (4) A second period of near-isothermal exhumation up to c. 6–5 kbar/850 °C is indicated by the partial breakdown of late biotite through volatile phase-absent melting reactions. Available isotope data suggest that the early part of the evolutionary history (stages 1–3) is presumably coeval with the early Proterozoic metamorphism in the extended granulite terrane of the Nilgiri, Biligirirangan and Shevaroy Hills to the north, while the exhumation of the granulites from mid-crustal levels (stage 4) occurred only during the Pan-African thermotectonic event, which led to the accretion of the Kerala Khondalite Belt to the south.     

Genetic Mechanism of Mineral Inclusions in Zircons from the Khondalite Series, Southeastern Inner Mongolia

The early Precambrian khondalite series is widely distributed in the Jining-Zhuozi-Fengzhen-Liangcheng area, southeastern Inner Mongolia. The khondalite series mainly consists of sillimanite garnet potash feldspar (or two-feldspar) gneiss and garnet biotite plagioclase gneiss. These gneissic rocks have commonly experienced granulite-facies metamorphism. In zircons separated from sillimanite garnet potash feldspar gneisses, many mineral inclusions, including Sil, Grt, Ky, Kfs, Qtz and Ap, have been identified by the Laser Raman spectroscopy. Generally, prograde metamorphic mineral inclusion assemblages such as Ky + Kfs + Qtz + Ap and Ky + Grt + Kfs + Qtz are preserved in the core of zircon, while peak granulite-facies metamorphic minerals including Sil + Grt + Kfs + Qtz and Sil + Grt + Kfs + Qtz + Ap are identified in the mantle and rim of the same zircon. However, in some zircons are only preserved the peak metamorphic minerals such as Sil + Grt + Kfs + Qtz and Sil + Grt + Kfs + Qtz + Ap from core to ri     

Amphibolite to granulite transition in aluminous greywackes from the Sierra de Comechingones, Córdoba, Argentina

We discuss upper-amphibolite to granulite facies, early Palaeozoic metamorphism and partial melting of aluminous greywackes from the Sierra de Comechingones, SE Sierras Pampeanas of Central Argentina. Consistent P–T estimates, obtained from equilibria involving Al and Ti exchange components in biotite and from more traditional thermobarometric equilibria, suggest that peak metamorphism of the exposed section took place at an essentially constant pressure of 7–8 kbar, and at temperatures ranging from 650 to 950 °C. Mineral compositions record an initial decompression, after peak metamorphism, of c. 1.5 kbar, which was accompanied by a cooling of c. 100 °C. Upper-amphibolite facies gneisses consist of the assemblage Qtz+Pl+Bt+Grt+Rt/Ilm. The transition to the granulite facies is marked by the simultaneous appearance of the assemblage Kfs+Sil and of migmatitic structures, suggesting that the amphibolite to granulite transition in the Sierra de Comechingones corresponds to the beginning of melting. Rocks with structural and/or chemical manifestations of partial melting range from metatexites, to diatexites, to melt-depleted granulites, consisting of the assemblage Grt+Crd+Pl+Qtz+Ilm±Ath. The melting stage overlapped at least partially with decompression, as suggested by the occurrence of cordierite, in both the migmatites and the residual granulites, of two distinct textural types: idiomorphic porphyroblasts (probably representing peritectic cordierite) and garnet-rimming coronas. Metapelitic rocks are unknown in the Sierra de Comechingones. Therefore, it appears most likely that the Al-rich residual assemblages found in the migmatites and residual granulites were formed by partial melting of muscovite- and sillimanite-undersaturated metagreywackes. We propose a mechanism for this that relies on the sub-solidus stabilization of garnet and the ensuing changes in the octahedral Al content of biotite with pressure and temperature.     

滇西鲁甸金沙江结合带新发现退变榴辉岩

在滇西鲁甸地区金沙江结合带新发现退变榴辉岩,其在野外呈透镜体状产于石榴子石白云母石英片岩中.利用电子探针及激光拉曼分析发现石榴子石和锆石中残留绿辉石包体.石榴子石及基质中的白云母为多硅白云母(Si(p.f.u)=3.27~3.53),指示岩石经历了高压变质作用过程.石榴子石发育进变质生长成分环带.岩相学及矿物化学特征显示,退变榴辉岩大致经历了进变质角闪岩相、峰期榴辉岩相、早期退变质以及晚期强退变这4个世代矿物组合,各阶段典型的矿物组合依次为Grt+AmpI+Qtz、Grt+Omp+Rt+Qtz+Phe、Pl+Di+AmpⅡ+Ilm+Spn+Qtz、AmpⅢ+Pl+Czo+Ilm+Qtz.该新发现对金沙江结合带复杂的变质演化P-T-t轨迹样式及年代格架、以金沙江洋为代表的整个西南三江地区古特提斯洋-陆俯冲-碰撞-造山的复杂构造演化历史以及微陆块的拼贴机制等关键科学问题的解决提供了极为重要的素材和更多的约束,具有重要的科学意义.      

Partial transformation of gabbro to coesite-bearing eclogite from Yangkou, the Sulu terrane, eastern China

An ultra-high-pressure (UHP) metamorphic slab at Yangkou Beach near Qingdao in the Sulu region of China consists of blocks of eclogite facies metagabbro, metagranitoid, ultramafic rock and mylonitic orthogneisses enclosed in granitic gneiss. A gradational sequence from incipiently metamorphosed gabbro to completely recrystallized coesite eclogite formed at ultra-high-pressures was identified in a single 30 m block; metagabbro is preserved in the core whereas coesite eclogite occurs along the block margins. The metagabbro contains an igneous assemblage of Pl+Aug+Opx+Qtz+Bt+Ilm/Ti-Mag; it shows relict magmatic textures and reaction coronas. Fine-grained garnet developed along boundaries between plagioclase and other phases; primary plagioclase broke down to Ab+Ky+Ms+Zo±Grt±Amp. Augite is rimmed by sodic augite or omphacite, whereas orthopyroxene is rimmed by a corona of Cum±Act and Omp+Qtz layers or only Omp+Qtz. In transitional rocks, augite and orthopyroxene are totally replaced by omphacite, and the lower-pressure assemblage Ab+Ky+Phn+Zo+Grt coexists with domains of Omp (Jd_70–73)+Ky±Phn in pseudomorphs after plagioclase. Both massive and weakly deformed coesite-bearing eclogites contain Omp+Ky+Grt+Phn+Coe/Qtz+Rt, and preserve a faint gabbroic texture. Coesite inclusions in garnet and omphacite exhibit limited conversion to palisade quartz; some intergranular coesite and quartz pseudomorphs after coesite also occur. Assemblages of the coronal stage, transitional and UHP peak occurred at about 540±50 °C at c. 13 kbar, 600–800 °C at ≥15–25 kbar and 800–850 °C at >30 kbar, respectively. Garnet from the coronal- through the transitional- to the eclogite-stage rocks show a decrease in almandine and an increase in grossular±pyrope components; garnet in low-grade rocks contains higher MnO and lower pyrope components. The growth textures of garnet within pseudomorphs after plagioclase or along grain boundaries between plagioclase and other phases are complex; the application of garnet zoning to estimate P–T should be carried out with caution. Some garnet enclosing quartz aggregates as inclusions shows radial growth boundaries; these quartz aggregates, as well as other primary and low-P phases, persisted metastably at UHP conditions due to sluggish reactions resulting from the lack of fluid during prograde and retrograde P–T evolution.     

Petrology and metamorphism of khondalites from the Jining complex,North China craton

The basement of the North China craton (NCC) can be divided into eastern and western blocks separating the Trans-North China orogen on the basis of petrologic associations, structures, metamorphic processes, and isotopic ages. Aluminous gneiss khondalites occur in the western block, and record a clockwise metamorphic P–T history characterized by nearly isothermal decompression following peak metamorphism at ca. 1.3 GPa and 825°C. Four metamorphic stages are recognized based on mineral assemblages. The early prograde metamorphic assemblage contains Ky+Bt+Ms+Grt+Pl+Qtz. The peak metamorphic mineral assemblage is characterized by Grt+Sil+Bt+Kfs+Pl+Qtz and the formation of cordierite after garnet, leading to a retrograde assemblage of Grt+Sil+Crd+Pl+Kfs+Qtz. Garnet retrogrades to biotite and the formation of pervasive matrix muscovite define a final metamorphic stage, inferred at ca. < 0.6 GPa and 700°C. Quantified metamorphic stages and a related clockwise P–T path derived from pseudosection analysis in the KMASH system suggest collision of the north Yinshan block with the South Ordos block at 1.92 Ga, before final suturing of the entire NCC basement.     

Partial melting and the formation of granulite facies assemblages in Namaqualand, South Africa

Abstract Dehydration-melting reactions, in which water from a hydrous phase enters the melt, leaving an anhydrous solid assemblage, are the dominant mechanism of partial melting of high-grade rocks in the absence of externally derived vapour. Equilibria involving melt and solid phases are effective buffers of aH₂,o. The element-partitioning observed in natural rocks suggests that dehydration melting occurs over a temperature interval during which, for most cases, aH₂o is driven to lower values. The mass balance of dehydration melting in typical biotite gneiss and metapelite shows that the proportion of melt in the product assemblage at T± 850°C is relatively small (10–20%), and probably insufficient to mobilize a partially melted rock body. Granulite facies metapelite, biotite gneiss and metabasic gneiss in Namaqualand contain coarse-grained, discordant, unfoliated, anhydrous segregations, surrounded by a finer grained, foliated matrix that commonly includes hydrous minerals. The segregations have modes consistent with the hypothesis that they are the solid and liquid products of the dehydration-melting reactions: Bt + Sil + Qtz + PI = Grt ° Crd + Kfs + L (metapelite), Bt + Qtz + Pl = Opx + Kfs + L (biotite gneiss), and Hbl + Qtz = Opx + Cpx + Pl + L (metabasic gneiss). The size, shape, distribution and modes of segregations suggest only limited migration and extraction of melt. Growth of anhydrous poikiloblasts in matrix regions, development of anhydrous haloes around segregations and formation of dehydrated margins on metabasic layers enclosed in migmatitic metapelites all imply local gradients in water activity. Also, they suggest that individual segregations and bodies of partially melted rock acted as sinks for soluble volatiles. The preservation of anhydrous assemblages and the restricted distribution of late hydrous minerals suggest that retrograde reaction between hydrous melt and solids did not occur and that H₂O in the melt was released as vapour on crystallization. This model, combined with the natural observations, suggests that it is possible to form granulite facies assemblages without participation of external fluid and without major extraction of silicate melt.     

胶北南山口古元古代高压基性麻粒岩和钙硅酸盐岩的岩石地球化学特征探讨

胶北莱西古元古代的高压基性麻粒岩和钙硅酸盐岩的基本矿物组合分别为以铁铝榴石为主的石榴石-普通辉石-铁紫苏辉石和钙铝榴石-黝帘石-葡萄石-钠长石.矿物岩石学研究表明钙硅酸盐岩是由含石榴石高压基性麻粒岩经退变质和钙质交代作用形成.南山口高压基性麻粒岩记录了麻粒岩相变质作用前、麻粒岩相变质作用、退变质和钙硅酸盐岩化共同作用以及完全钙硅酸盐岩化的四个阶段的地质作用,其矿物组合分别为Cpx+ Pl+ Qtz(M1),Grt+ Cpx+ Rt+ Qtz(M2),Cpx+Pl+ Opx+ Ilm+ Mgt+ Ep(M3)和Grs+ Zo+ Prh+ Ab+ Cal(M4).微量元素研究表明,高压基性麻粒岩中大离子亲石元素Ba、Rb、K、Rb、Th富集,而高场强元素Nb、Zr、Ti、Y亏损,具有轻稀土富集的右倾型稀土配分曲线.稀土元素和微量元素配分图解显示了岛孤拉斑玄武岩的特征.主元素、微量元素的构造判别图解进一步分析表明高压基性麻粒岩及其钙硅酸盐岩的原岩形成于大陆边缘的岛弧环境.综合高压基性麻粒岩岩石学、元素地球化学特征认为,莱西高压基性麻粒岩的原岩是拉斑玄武岩质岩石,可能是形成于孤后扩张背景下基性的侵入岩或喷出岩.岩石形成以后,在胶-辽-吉带碰撞闭合过程中,经历了麻粒岩相变质作用,又在后来的抬升过程中经历退变质和钙硅酸盐岩化作用.     

Regional-scale Grenvillian-age UHT metamorphism in the Mollendo–Camana block (basement of the Peruvian Andes)

The Mollendo–Camana Block (MCB) is a 50 × 150 km Precambrian inlier of the Andean belt that outcrops along the Pacific coast of southern Peru. It consists of stromatic migmatites of Paleoproterozoic heritage intensely metamorphosed during the Grenville event (c. 1 Ga; U‐Pb and U‐Th‐Pb ages on zircon and monazite). In the migmatites, aluminous mesosomes (FMAS) and quartzofeldspathic leucosomes (KFMASH), contain various amounts of K‐feldspar (Kfs), orthopyroxene (X_Mg Opx = 0.86), plagioclase (Pl), sillimanite (Sil; exceptionally kyanite, Ky) ilmenite (Ilm), magnetite (Mag), quartz (Qtz), and minor amounts of garnet (X_Mg Grt = 0.60), sapphirine (X_Mg Spr = 0.87), cordierite (X_Mg Crd = 0.92) and biotite (X_Mg Bt = 0.83). The ubiquitous peak mineral assemblage is Opx‐Sil‐Kfs‐Qtz‐(± Grt) in most of the MCB, which, together with the high Al content of orthopyroxene (10% Al₂O₃) and the local coexistence of sapphirine‐quartz, attest to regional UHT metamorphism (> 900 °C) at pressures in excess of 1.0 GPa. Fluid‐absent melting of biotite is responsible for the massive production of orthopyroxene that proceeded until exhaustion of biotite (and most of the garnet) in the southern part of the MCB (Mollendo‐Cocachacra areas). In this area, a first stage of decompression from 1.1–1.2 to 0.8–0.9 GPa at temperatures in excess of 950 °C, is marked by the breakdown of Sil‐Opx to Spr‐Opx‐Crd assemblages according to several bivariant FMAS reactions. High‐T decompression is also shown by Mg‐rich garnet being replaced by Crd‐Spr‐ and Crd‐Opx‐bearing symplectites, and reacting with quartz to produce low‐Al‐Opx‐Sil symplectites in quartz‐rich migmatites. Neither osumilite nor spinel‐quartz assemblages being formed, isobaric cooling at about 0.9 GPa probably followed the initial decompression and proceeded with massive precipitation of melts towards the (Os) invariant point, as demonstrated by Bt‐Qtz‐(± pl) symplectites in quartz‐rich migmatites (melt + Opx + Sil = Bt + Grt + Kfs + Qtz). Finally, Opx rims around secondary biotite attest to late fluid‐absent melting, compatible with a second stage of decompression below 900 °C. The two stages of decompression are interpreted as due to rapid tectonic denudation whereas the regional extent of UHT metamorphism in the area, probably results from large‐scale penetration of hot asthenospheric mantle at the base of an over‐thickened crust.     

Eo-Alpine HP metamorphism in the Permian intrusives from the steep belt of the central Alps (Languard-Campo nappe and Tonale Series)

Abstract

Diorites and granitoids that intruded the Upper Austroalpine units of the central Alps during the Permian display map-pable tectonic imprints and metamorphic transformations that were acquired during the Alpine tectonometamorphic cycle. Superposed heterogeneous deformations interacted with metamorphic re-equilibration stages and created a range of textural types that reflect local deformation gradients: coronitic transformations textures, normally foliated S-tectonites and mylonitic foliations. The three textural types are distinguished on maps recording foliation trajectories of successive deformation phases, which are correlated to the evolution of metamorphic assemblages. Tectonic deformation of Alpine age is represented by three generations of ductile syn-metamorphic structures. The mineral assemblages stable during the first Alpine deformation phase (D1) are Amp_II + P1_II + white mica, + Zo/Czo + Grt + Qtz ± Mg-Ch1 ± Ilm in metadiorites and P1_II + white mica_I + Zo/Czo + Grt + Amp_II + Qtz ± Ilm/Ttn in metagranitoids; the successive foliations D2a and D2b are defined by greenschist facies minerals. Thermobarometric estimates allow T = 500–600 °C and P = 1.1 ± 0.2 GPa conditions to be determined during D1 and T ≤ 350 °C and P ≤ 0.5 GPa during D2. Relict igneous minerals in metadiorites allow to determine intrusive conditions of T = 879 ± 110 °C and P = 0.4–0.7 GPa. Radiometric ages and P/T ratio of Alpine P_maxT_Pmax suggest that the inferred P-T-d-t path may represent the thermal state of the initial Alpine subduction stages. © 2000 Éditions scientifiques et médicales Elsevier SAS     

青藏高原东南缘哀牢山构造带泥质高压麻粒岩的发现及其构造意义

哀牢山构造带泥质高压麻粒岩主要由石榴石、夕线石、钾长石和斜长石变斑晶及尖晶石、铁假蓝宝石、蓝晶石、石英、金红石和钛铁矿包裹体组成,为确定印支地块和华南地块的边界提供了关键性标志。石榴石-黑云母-斜长石-石英地质温压计(GBPQ)计算结果及标志性高温矿物组合(Spl+Qz)表明泥质高压麻粒岩的形成和演化经历了高压/高温进变质到中温/低压退变质的顺时针P-T演化过程。其中:1)高压/高温进变质阶段的矿物组合为Ky+Sil+Grt1+Kf1+Pl1+Spr+Ter(Kf+Pl)+Bt1+Spl+Qtz+Ilm1+Rut1,形成于850～919℃,≥10.4kbar;2)中温/低压退变质阶段的矿物组合为Grt2+Bt2+Pl2+Ms+Qtz+Ilm2+Rut2,早期和晚期的温压条件分别为664～754℃,4.9～6.5kbar和572～576℃,3.5～3.9kbar。反映陆壳物质在碰撞过程中俯冲到地下深处(≥30km)经高压高温变质后快速折返到中上地壳的动力学演变轨迹。     

Experimental study of phase relations involving osumilite in the system K2O-FeO-MgO-Al2O3-SiO2-H2O at high pressure and temperature

Abstract Phase relations and mineral chemistry for garnet (Grt), orthopyroxene (Opx), sapphirine (Spr), water-undersaturated cordierite (Crd), osumilite (Osu), sillimanite (Sil), K-feldspar (Kfs), quartz (Qtz) and a water-undersaturated liquid (Liq) have been determined experimentally in the system KFMASH (K₂O-FeO-MgO-Al₂O₃-SiO₂-H₂O) under low P_H2O and f_O2 conditions. Four compositions have been studied with 100 [Mg/(Mg + Fe)] ranging from 65.6 to 89.7. Based on our experimental data, a P-T grid is derived for the KFMASH system in the presence of quartz, orthopyroxene and liquid. Osumilite has been found in various mineral assemblages from 950 to 1100°C and 7.5 to 11 kbar. In the temperature range 1000-1100°C, the pair Os-Grt is stable over a pressure range of about 3kbar. The divariant reaction Os + Opx = Grt + Kfs + Qtz runs to the right with increasing pressure. Because osumilite is the most magnesian phase it is restricted to Mg-rich compositions at high pressure. The reaction defining the upper pressure stability limit of Os-Grt is located around 11 kbar with a nearly flat dP/dT slope over the temperature range 950–100°C. Over the entire temperature range investigated osumilite is not stable beyond 12 kbar. The data imply a restricted pressure range between 11 and 12 kbar for the stability of the assemblage Os-Opx-Sil-Kfs-Qtz. At 1050°C and above, osumilite occurs in various mineral assemblages together with the high-T pair Spr-Qtz. When coexisting with garnet, orthopyroxene or sapphirine, osumilite is always the most magnesian phase. At 1050 and 1100°C, liquid is invariably the most Fe-rich phase in the run product. Our data support a theoretical P-T grid for the KFMAS system in which osumilite is stable outside the field of the high-T assemblage Spr-Qtz. Moreover, our grid indicates that Os-Opx-Sil-Kfs-Qtz has a more restricted pressure and compositional stability domain than Os-Grt, in agreement with natural occurrences. Osumilite is stable over a large pressure range, such that in Mg-rich rocks, and at high temperature, it can occur at any depth in normal thickness continental crust.     

Mineral inclusions in zircons of para- and orthogneiss from pre-pilot drillhole CCSD-PP1, Chinese Continental Scientific Drilling Project

The pre-pilot drillhole CCSD-PP1, Chinese Continental Scientific Drilling Project (CCSD), with depth of 432 m, is located in the Donghai area in the southwestern Sulu terrane. The core samples are mainly comprised of paragneiss, orthogneiss and ultramafic rock with minor intercalated layers of eclogite and phengite-bearing kyanite quartzite. All analyzed paragneiss and orthogneiss samples were overprinted on amphibolite facies retrograde metamorphism. Coesite and coesite-bearing ultrahigh-pressure (UHP) mineral assemblages were identified by Raman spectroscopy and electron microprobe analysis as inclusions in zircons separated from paragneiss, eclogite and phengite-bearing kyanite quartzite samples. In the paragneiss samples, UHP mineral inclusion assemblages mainly consist of Coe+Omp+Grt+Phe, Coe+Jd+Phe+Ap preserved in the mantles (M) and rims (R) of zircons. These UHP mineral inclusion assemblages yield temperatures of 814–852 °C and pressures of ≥28 kbar, presenting the P–T condition of UHP peak metamorphism of these country rocks. According to the mineral inclusions and cathodoluminescence images of zircons, the orthogneisses can be divided into two types: UHP (OG1) and non-UHP (OG2). In OG1 orthogneisses, low-pressure mineral inclusion assemblage, mainly consisting of Qtz+Phe+Ab+Ksp+Ap, were identified in zircon cores (C), while coesite or coesite-bearing UHP mineral inclusions were identified in the mantles (M) and rims (R) of the same zircons. These features suggest that the OG1 orthogneisses, together with the paragneisses, phengite-bearing kyanite quartzite and eclogite experienced widespread UHP metamorphism in the Sulu terrane. However, in the zircons of OG2 orthogneiss samples, no UHP mineral inclusions were found. Inclusions mainly comprised Qtz+Phe+Ap and were identified in cores (C), mantles (M) and rims (R) of OG2 zircons; the cathdoluminescence images of all analyzed zircons showed clear zonings from cores to rims. These features indicate that the OG2 orthogneisses in pre-pilot drillhole CCSD-PP1 did not experience UHP metamorphism. Therefore, we should not rule out the possibility that some orthogneisses in Sulu terrane might represent relatively low-pressure granitic intrusives emplaced after the UHP event.     

Early Carboniferous blueschist facies metamorphism in metapelites of the West Sudetes (Northern Saxothuringian Domain,Bohemian Massif)

The metamorphic evolution of micaschists in the north‐eastern part of the Saxothuringian Domain in the Central European Variscides is characterized by the early high‐pressure M1 assemblage with chloritoid in cores of large garnet porphyroblasts and a Grt–Chl–Phe–Qtz ± Pg M2 assemblage in the matrix. Minerals of the M1–M2 stage were overprinted by the low‐pressure M3 assemblage Ab–Chl–Ms–Qtz ± Ep. Samples with the best‐preserved M1–M2 mineralogy mostly appear in domains dominated by the earlier D1 deformation phase and are only weakly affected by subsequent D2 overprint. Thermodynamic modelling suggests that mineral assemblages record peak‐pressure conditions of ≥18–19 kbar at 460–520 °C (M1) followed by isothermal decompression 10.5–13.5 kbar (M2) and final decompression to <8.5 kbar and <480 °C (M3). The calculated peak P–T conditions indicate a high‐pressure/low‐temperature apparent thermal gradient of ～7–7.5 °C km^?1. Laser ablation inductively coupled plasma mass spectrometry isotopic dating and electron microprobe chemical dating of monazite from the M1–M2 mineral assemblages give ages of 330 ± 10 and 328 ± 6 Ma, respectively, which are interpreted as the timing of a peak pressure to early decompression stage. The observed metamorphic record and timing of metamorphism in the studied metapelites show striking similarities with the evolution of the central and south‐western parts of the Saxothuringian Domain and suggest a common tectonic evolution along the entire eastern flank of the Saxothuringian Domain during the Devonian–Carboniferous periods.     

Contrasting styles of Taconian, Eastern Acadian and Western Acadian metamorphism, central and western New England

The two major Early to Middle Palaeozoic tectonic/metamorphic events in the northern Appalachians were the Taconian (Middle to Late Ordovician) in central to western areas and the Acadian (Late Silurian to early Middle Devonian) in eastern to west-central areas. This paper presents a model for the Acadian orogenic event which separates the Acadian metamorphic realm into eastern and western belts based on distinctively different styles. We propose that the Acadian metamorphism in the east was the delayed consequence of Taconian back-arc lithospheric modification. East of the Taconian island arc, thick accumulations of Late Ordovician and Silurian sediments, coupled with plutons rising along a magmatic arc, produced crustal thermal conditions appropriate for anomalously high-T, low-P metamorphism accompanied by major crustal anatexis. In this zone, upward melt migration was coupled with subsequent E-W crustal shortening (possibly due to outboard collision with the Avalon terrane) to produce mechanical conditions that favoured formation of fold and thrust nappes and resultant tectonic thickening to the west (and probably to the east as well). The basis for the distinction between the Eastern and Western Acadian events lies in the contrasting styles of metamorphism accompanying each. Evidence for contrasting metamorphic styles consists of (1) estimated metamorphic field gradients (MFGs) based on thermobarometric studies, and (2) petrological evidence for contrasting P–T trajectories. West of the Acadian metamorphic front, the Taconian zone has an MFG in which peak temperatures of 400-600° C were reached at pressures of about 4–6 kbar, with both P and T increasing to the east. Near its western edge, the Western Acadian metamorphic overprint has a similar MFG to the Taconian, and is mainly discriminated by ⁴⁰Ar/³⁹Ar dating and microtextural evidence. East of this narrow zone, the Western Acadian overprint is characterized by progressively higher temperatures (600–725° C) and pressures (6.5–10 kbar, or more) to the east, yielding an overall MFG that lies along, or slightly above, the kyanite–sillimanite boundary on a P–T diagram. There is little or no plutonism accompanying Western Acadian metamorphism. In contrast, thermobarometry in the Eastern Acadian, east of the Bronson Hill Belt, yields high-T, intermediate-P conditions for the highest grade rocks known in New England: T= 650–750° C, P= 4.5–6.5 kbar for granulite facies assemblages which apparently formed along an ‘anticlockwise’P–T path. The Bronson Hill Belt lies geographically between the Eastern and Western Acadian zones and shows transitional petrological behaviour: anomalously high temperatures at intermediate pressures, but a ‘clockwise’ path with decompression cooling. Radiometric dating indicates peak Taconian conditions may have been achieved as early as 475 Ma in the Taconian hinterland and as late as 445 Ma in the Taconian foreland (including the Taconic allochthons). Eastern Acadian magmatism may have started as early as 425 Ma, and most nappe-stage deformation and metamorphism in the Eastern Acadian zone appears to have ended by about 410 Ma. Tectonic thickening in the Western Acadian (including the western counterparts of the nappe-stage deformation documented in the Eastern Acadian) must pre-date attainment of peak metamorphic conditions dated at 395–385 Ma. Dome-stage deformation clearly post-dates peak metamorphism and deforms metamorphic isograds. The end of Western Acadian deformation is well constrained by 370-375 Ma radiometric ages of late pegmatites and granitoids which cross-cut all structures.