A hydrochemical study of the Hammam Righa geothermal waters in north-central Algeria

This study focuses on the hydrochemical characteristics of 47 water samples collected from thermal and cold springs that emerge from the Hammam Righa geothermal field, located in north-central Algeria. The aquifer that feeds these springs is mainly situated in the deeply fractured Jurassic limestone and dolomite of the Zaccar Mount. Measured discharge temperatures of the cold waters range from 16.0 to 26.5 °C and the hot waters from 32.1 to 68.2 °C. All waters exhibited a near-neutral pH of 6.0–7.6. The thermal waters had a high total dissolved solids (TDS) content of up to 2527 mg/l, while the TDS for cold waters was 659.0–852.0 mg/l. Chemical analyses suggest that two main types of water exist: hot waters in the upflow area of the Ca–Na–SO₄ type (Hammam Righa) and cold waters in the recharge zone of the Ca–Na–HCO₃ type (Zaccar Mount). Reservoir temperatures were estimated using silica geothermometers and fluid/mineral equilibria at 78, 92, and 95 °C for HR4, HR2, and HR1, respectively. Stable isotopic analyses of the δ¹⁸O and δD composition of the waters suggest that the thermal waters of Hammam Righa are of meteoric origin. We conclude that meteoric recharge infiltrates through the fractured dolomitic limestones of the Zaccar Mount and is conductively heated at a depth of 2.1–2.2 km. The hot waters then interact at depth with Triassic evaporites located in the hydrothermal conduit (fault), giving rise to the Ca–Na–SO₄ water type. As they ascend to the surface, the thermal waters mix with shallower Mg-rich groundwater, resulting in waters that plot in the immature water field in the Na–K–Mg diagram. The mixing trend between cold groundwaters from the recharge zone area (Zaccar Mount) and hot waters in the upflow area (Hammam Righa) is apparent via a chloride-enthalpy diagram that shows a mixing ratio of 22.6 < R < 29.2 %. We summarize these results with a geothermal conceptual model of the Hammam Righa geothermal field.     

Isotope–geochemical characterization and geothermometrical modeling of Uttarakhand geothermal field,India

Uttarakhand geothermal area, located in the central belt of the Himalayan geothermal province, is one of the important high temperature geothermal fields in India. In this study, the chemical characteristics of the thermal waters are investigated to identify the main geochemical processes affecting the composition of thermal waters during its ascent toward the surface as well as to determine the subsurface temperature of the feeding reservoir. The thermal waters are mainly Ca–Mg–HCO₃ type with moderate silica and TDS concentrations. Mineral saturation states calculated from PHREEQC geochemical code indicate that thermal waters are supersaturated with respect to calcite, dolomite, aragonite, chalcedony, quartz (SI > 0), and undersaturated with respect to gypsum, anhydrite, and amorphous silica (SI < 0). XRD study of the spring deposit samples fairly corroborates the predicted mineral saturation state of the thermal waters. Stable isotopes (δ¹⁸O, δ²H) data confirm the meteoric origin of the thermal waters with no oxygen-18 shift. The mixing phenomenon between thermal water with shallow ground water is substantiated using tritium (³H) and chemical data. The extent of dilution is quantified using tritium content of thermal springs and non-thermal waters. Classical geothermometers, mixing model, and multicomponent fluid geothermometry modeling (GeoT) have been applied to estimate the subsurface reservoir temperature. Among different classical geothermometers, only quartz geothermometer provide somewhat reliable estimation (96–140 °C) of the reservoir temperature. GeoT modeling results suggest that thermal waters have attained simultaneous equilibrium with respect to minerals like calcite, quartz, chalcedony, brucite, tridymite, cristobalite, talc, at the temperature 130 ± 5 °C which is in good agreement with the result obtained from the mixing model.     

Hydrochemical and isotopic properties of Heybeli geothermal area (Afyon,Turkey)

The thermal waters at the Heybeli (K?z?lkirse) low-temperature geothermal field located in the Afyonkarahisar Province (western Turkey) are discharged from Paleozoic recrystallized limestone. The temperature, specific electrical conductivity, and pH values of the thermal waters are within the range of 28.9 to 54.7 °C, 587 to 3580 μS/cm, and 6.32 to 7.37, respectively. The Heybeli geothermal system is fed by meteoric waters. The waters are heated at depth by high geothermal gradient caused by the neotectonic activity in the deep and ascend to the surface through fractures and faults by convection. The thermal waters are of Na-Ca-HCO₃-SO₄ type and their chemical composition of the waters is mainly controlled by water-rock interaction and mixing processes. The δ¹⁸O, δ²H and tritium compositions show that the thermal waters are of meteoric origin and the residence time at the reservoir is longer than 50 years. Isotope data (δ³⁴S and δ¹³C) indicate recrystallized limestones as origin of CO₂ and structural substitution of sulfate into marine carbonates (CAS) as origin of sulfur. Chemical, \( {\updelta}^{18}{\mathrm{O}}_{\left({\mathrm{SO}}_4-{\mathrm{H}}_2\mathrm{O}\right)} \) isotope geothermometers and mineral equilibrium diagrams applied to thermal waters gave reservoir temperatures between 62 and 115 °C. Saturation index calculations show that the most expected minerals causing scaling at outflow conditions during the production and utilization of Heybeli geothermal waters are calcite, aragonite, dolomite, quartz, and chalcedony.     

Hydrogeochemistry of thermal and mineralized waters in the Diyadin (Ağri) area,Eastern Turkey

The Diyadin Geothermal area, located in the eastern part of Anatolia (Turkey) where there has been recent volcanic activity, is favorable for the formation of geothermal systems. Indeed, the Diyadin geothermal system is located in an active geodynamic zone, where strike-slip faults and tensional cracks have developed due to N–S regional compression. The area is characterized by closely spaced thermal and mineralized springs, with temperatures in the range 30–64 °C, and flowrates 0.5–10 L/s. Thermal spring waters are mainly of Ca(Na)-HCO₃ and Ca(Mg)-SO₄ types, with high salinity, while cold groundwater is mostly of Ca(Na, Mg)-HCO₃ type, with lower salinity. High contents of some minor elements in thermal waters, such as F, B, Li, Rb, Sr and Cs probably derive from enhanced water–rock interaction.Thermal water samples collected from Diyadin are far from chemical equilibrium as the waters flow upward from reservoirs towards spring vents and possibly mix with cooler waters. The temperatures of the deep geothermal reservoirs are estimated to be between 92 and 156 °C in Diyadin field, based on quartz geothermometry, while slightly lower estimates are obtained using chalcedony geothermometers. The isotopic composition of thermal water (δ¹⁸O, δ²H, δ³H) indicates their deep-circulating meteoric origin. The waters are likely to have originated from the percolation of rainwater along fractures and faults to the deep hot reservoir. Subsequent heating by conduction due to the presence of an intrusive cupola associated with the Tendurek volcano, is followed by the ascent of deep waters to the surface along faults and fractures that act as hydrothermal conduits.Modeling of the geothermal fluids indicates that the fluid is oversaturated with calcite, aragonite and dolomite, which matches travertine precipitation in the discharge area. Likewise, the fluid is oversaturated with respect to quartz, and chalcedony indicating the possibility of siliceous precipitation near the discharge areas. A conceptual hydro-geochemical model of the Diyadin thermal waters based on the isotope and chemical analytical results, has been constructed.     

Geochemical and isotope hydrological characterisation of geothermal resources at Godavari valley,India

Thermal waters at the Godavari valley geothermal field are located in the Khammam district of the Telangana state, India. The study area consists of several thermal water manifestations having temperature in the range 36–76 °C scattered over an area of ~35 km². The thermal waters are Na–HCO₃ type with moderate silica and TDS concentrations. In the present study, detailed geochemical (major and trace elements) and isotope hydrological investigations are carried out to understand the hydrogeochemical evolution of these thermal waters. Correlation analysis and principal component analysis (PCA) are performed to classify the thermal waters and to identify the different geochemical processes controlling the thermal water geochemistry. From correlation matrix, it is seen that TDS and EC of the thermal springs are mainly controlled by HCO₃ and Na ions. In PCA, thermal waters are grouped into two distinct clusters. One cluster represents thermal waters from deeper aquifer and other one from shallow aquifer. Lithium and boron concentrations are found to be similar followed by rubidium and caesium concentrations. Different ternary plots reveal rock–water interaction to be the dominant mechanism for controlling trace element concentrations. Stable isotopes (δ¹⁸O, δ²H) data indicate the meteoric origin of the thermal waters with no appreciable oxygen-18 shift. The low tritium values of the samples originating from deeper aquifer reveal the long residence time (>50 years) of the recharging waters. XRD results of the drill core samples show that quartz constitutes the major mineral phase, whereas kaolinite, dolomite, microcline, calcite, mica, etc. are present as minor constituents. Quartz geothermometer suggests a reservoir temperature of 100 ± 20 °C which is in good agreement with the values obtained from K–Mg and Mg-corrected K–Mg–Ca geothermometers.     

Mixing processes in hydrothermal spring systems and implications for interpreting geochemical data: a case study in the Cappadocia region of Turkey

Mixing is a dominant hydrogeological process in the hydrothermal spring system in the Cappadocia region of Turkey. All springs emerge along faults, which have the potential to transmit waters rapidly from great depths. However, mixing with shallow meteoric waters within the flow system results in uncertainty in the interpretation of geochemical results. The chemical compositions of cold and warm springs and geothermal waters are varied, but overall there is a trend from Ca–HCO₃ dominated to Na–Cl dominated. There is little difference in the seasonal ionic compositions of the hot springs, suggesting the waters are sourced from a well-mixed reservoir. Based on δ¹⁸O and δ²H concentrations, all waters are of meteoric origin with evidence of temperature equilibration with carbonate rocks and evaporation. Seasonal isotopic variability indicates that only a small proportion of late spring and summer precipitation forms recharge and that fresh meteoric waters move rapidly into the flow system and mix with thermal waters at depth. ³H and percent modern carbon (pmC) values reflect progressively longer groundwater pathways from cold to geothermal waters; however, mixing processes and the very high dissolved inorganic carbon (DIC) of the water samples preclude the use of either isotope to gain any insight on actual groundwater ages.     

Hydrochemical and isotopic properties of the Mahmutlu and Bağdatoğlu mineralized thermal springs, Kırşehir, Turkey

The present study identifies the hydrochemical and isotopic properties of the Mahmutlu and Ba?dato?lu mineralized thermal springs in K?r?ehir province, a geothermal field in central Anatolia, Turkey. Based on these properties, a hydrogeological regime is proposed in order to explain the Mahmutlu–Ba?dato?lu geothermal system. The relation between the concentrations of the environmental stable isotopes deuterium and oxygen-18 in the water is similar to the relationship in global meteoric water, indicating that the water is of meteoric origin. Evaluation of the geochemical characteristics of the water reveals that these two thermal springs belong to the same hydrogeological system. The hydrogeological system comprises a fractured limestone member of the Çevirme Formation and the Kervansaray Formation as reservoir rocks, and the Delice?rmak Formation as an overlying aquitard. The waters of the Mahmutlu and Ba?dato?lu springs are mainly of the Na-Cl-SO4 type that originate from the Pohrenk evaporite. The thermal waters are undersaturated with respect to calcite, dolomite, halite, and gypsum. The δ 18O and δ 2H contents indicate a δ 18O shift in the Mahmutlu and Ba?dato?lu waters. The temperature range of the two reservoirs is estimated to be 98–158?°C, on the basis of Na+K+Ca and SiO2 geothermometers.     

Characteristics of the geothermal water in Changbai Mountain volcanic region,northeast of China

Geothermal water is plentiful in Changbai Mountain region, northeastern China, due to the volcanic activities and widespread faults. For the exploration of geothermal resources, this study uses quartz and cation geothermometer to estimate the temperatures of the geothermal reservoir and uses the tubular models to evaluate the thermal gradient. The hydrogeochemical characteristics of the geothermal resources were also evaluated by hydrogeochemical analysis. The results showed that the geothermal reservoir temperatures of the four major thermal springs in Changbai Mountain region range from 72 to 169 °C. The average geothermal reservoir temperatures of Jinjiang hot springs, Changbai hot springs I, Xianrenqiao hot springs, and Changbai hot springs II are 129.25, 169, 89, and 73.67 °C, respectively. The geothermal gradient values of the four major thermal springs have different characteristics. The geothermal gradient values of Jinjiang hot springs and Changbai hot springs I are 4.6 and 3.1 °C/100 m, respectively. The geothermal gradient values of Xianrenqiao thermal springs and Changbai thermal springs II are both lower than 1.5 °C/100 m, with the values of 1.1 and 1.4 °C/100 m. And the geothermal gradients are influenced by Changbai Mountain Tianchi volcano. In addition, the water chemical analyses showed that the geothermal water types are HCO₃-Na with higher concentrations of Na⁺, Cl^?, SO₄ ^2?, TDS, and HCO₃ ^? than the non-thermal waters, which suggested a deep and long water cycle of the thermal water, and therefore a sufficient water-rock interaction.     

Properties of geothermal resources in Kebilli region, Southwestern Tunisia

The Kebilli region is located in the Southwestern part of Tunisia, and is characterized by the presence of deep and shallow geothermal systems (continental intercalary and complex terminal). Chemical and isotopic contents are used to classify the type and determine the origin of thermal water. An evaluation of reservoir temperature and a possible geothermal fluid mixing are also carried out. Both continental intercalary-deep aquifer and complex terminal-shallow aquifer are of Na–(Ca)–Cl–(SO₄) mixed water type. The use of different geothermometers and the computation of saturation indexes for different solid phases suggests that the thermal reservoir temperature of the continental intercalary is between 92 and 105 °C, while the fluid temperature from the shallow complex terminal aquifer ranges from 50 to 75 °C. Also, the isotopic data indicates the old origin of all groundwater of Southwestern Tunisia. Mixing effects characterizing the continental intercalary and the complex terminal aquifers were identified using δ²H and δ¹⁸O relationship. It appears that the upward movement of thermal water from the deep aquifer to shallow ones is probably due to the abundant fractures in the research area.     

Hydrogeochemical and isotopic composition of a low-temperature geothermal source in northwest Turkey: case study of Kirkgecit geothermal area

Chemical and isotopic compositions of three hot springs and one cold spring in the Kirkgecit geothermal field, located 15 km southwest of Canakkale-Biga in the northwest of Turkey, were monitored five times during 2005 and 2007. The physico-chemical characteristics of the hot springs are average discharge 3–3.5 L/s, surface temperature 45–52°C, pH 8.9–9.3, and electrical conductivity (EC) 620–698 μS/cm. The cold spring has a temperature of 12–13°C, pH 7.5–8.3, and EC 653–675 μS/cm. The hot waters are Na-SO₄ type, whereas the cold water is Ca-HCO₃ type. Chemical geothermometers suggest that the reservoir temperature is around 80–100°C. The isotopic data (oxygen-18, deuterium and tritium) indicate that the thermal waters are formed by local recharge and deep circulation of meteoric waters.     

Geochemical patterns and origin of alkaline thermal waters in Central Greece (Platystomo and Smokovo areas)

This study investigates the origin and chemical composition of the thermal waters of Platystomo and Smokovo areas in Central Greece as well as any possible relationships of them to the neighboring geothermal fields located in the south-eastern part of Sperchios basin. The correlations between different dissolved salts and the temperature indicate that the chemical composition of thermal waters are controlled by, the mineral dissolution and the temperature, the reactions due to CO₂ that originates possibly by diffusion from the geothermal fields of Sperchios basin and the mixing of thermal waters with fresh groundwater from karst or shallow aquifers. Two major groups of waters are recognized on the basis of their chemistry: thermal waters of Na–HCO₃–Cl type and thermal waters mixed with fresh groundwater of Ca–Mg–Na–HCO₃ type. All thermal waters of the study area are considered as modified by water–rock interaction rainwater, heated in depth and mixed in some cases with fresh groundwater when arriving to the surface. Trace elements present low concentrations. Lithium content suggests discrimination between the above two groups of waters. Boron geochemistry confirms all the above remarks. Boron concentration ranges from 60 μg L^?1 to 10 mg L^?1, while all samples’ constant isotopic composition (δ¹¹B ≈ 10 ‰) indicates leaching from rocks. The positive correlation between the chemical elements and the temperature clearly indicates that much of the dissolved salts are derived from water–rock interactions. The application of geothermometers suggests that the reservoir temperature is around 100–110 °C. Chalcedony temperatures are similar to the emergent temperatures and this is typical of convective waters in fault systems in normal thermal gradient areas.     

A multi-isotope approach (O,H, C,S, B and Sr) to understand the source of water and solutes in some the thermal springs from West Coast geothermal area,India

The West Coast belt, consisting of nearly 60 thermal springs, is one of the most diversified geothermal fields in India. The present work describes the multi-isotopic (O, H, C, S, B and Sr) characterization of thermal waters carried out in the Tural-Rajwadi geothermal field, situated in southern sector of the west coast geothermal area. The aim of this study is to delineate the origin of thermal water as well as to ascertain the sources of carbon, sulphur, boron and strontium dissolved in those thermal springs. The stable isotopes (δ²H and δ¹⁸O) and tritium data indicate that these thermal springs are not recently recharged rain water rather, it contains very old component of water. Oxygen-18 shift is observed due to rock-water interaction over a long period of time. Carbon isotopic composition of DIC points out to the silicate weathering with soil CO₂ coming from C₃ type of plants whereas δ³⁴S of dissolved sulphate confirms the marine origin of sulphate. This marine signature is basically derived from paleo-seawater possibly entrapped within the flows. Boron isotopic data reveals that both the seawater and rock dissolution are the sources of boron in the thermal waters whereas high ⁸⁷Sr/⁸⁶Sr ratios (0.7220–0.7512) of the thermal waters conclusively establishes that archean granitic basement is the predominant rock source of strontium, not the Deccan flood basalts. In addition, like strontium, concentrations of lithium, rubidium and caesium are also governed by the rock-water interaction. Thus, the combined use of this multi-isotope technique coupled with trace element concentrations proves to be an effective tool to establish the sources of solutes in the thermal water.     

Evaluation of the solute geothermometry of thermal springs and drilled wells of La Primavera (Cerritos Colorados) geothermal field,Mexico: A geochemometrics approach

A detailed study on the solute geothermometry of thermal water (18 springs and 8 drilled wells) of La Primavera geothermal field (LPGF) in Mexico has been carried out by employing a geochemical database compiled from the literature and by applying all the available solute geothermometers. The performance of these geothermometers in predicting the reservoir temperatures has been evaluated by applying a geochemometrics (geochemical and statistical) method. The springs of the LPGF are of bicarbonate type and the majority have attained partial-equilibrium chemical conditions and the remaining have shown non-equilibrium conditions. In the case of geothermal wells, water is dominantly of chloride-type and, among the studied eight geothermal wells, four have shown full-equilibrium chemical conditions and another four have indicated partial-equilibrium conditions. All springs of HCO₃^−​ type water have provided unreliable reservoir temperatures, whereas the only one available spring of SO₄²⁻ type water has provided the reservoir temperature nearer to the average BHT of the wells. Contrary to the general expected behavior, spring water of non-equilibrium and geothermal well water of partial-equilibrium chemical conditions have indicated more reliable reservoir temperatures than those of partially-equilibrated and fully-equilibrated water, respectively. Among the chemical concentration data, Li and SiO₂ of two springs, SO₄²⁻ and Mg of four springs, and HCO₃ and Na concentrations of two geothermal wells were identified as outliers and this has been reflected in very low reservoir temperatures predicted by the geothermometers associated with them (Li–Mg, Na–Li, Na–K–Mg, SiO₂ etc.). Identification of the outlier data points may be useful in differentiating the chemical characteristics, lithology and the physico-chemical and geological processes at the sample locations of the study area.In general, the solute geothermometry of the spring waters of LPGF indicated a dominantly (94%) of underestimated deep reservoir temperatures, whereas in the case of the geothermal wells, many temperatures (54%) are underestimated, some are (43%) overestimated and a very small number (3%) are similar to an average bottom-hole temperatures (BHT) of the wells. 28 out of the total applied 29 geothermometers for spring waters have predicted the deep reservoir temperatures that are characterized by statistically significant large differences compared to the average BHTs of the geothermal wells. In the case of waters of the geothermal wells, 23 out of the total applied 28 geothermometers have predicted the reservoir temperatures similar (statistically no significant differences) to the BHTs of the corresponding geothermal wells.     

Mineral equilibria and geothermometry of the Dalaman–Köyceğiz thermal springs,southern Turkey

The Dalaman and Köyceğiz thermal springs are from karstic limestones belonging to Upper Cretaceous to Burdigalian Beydağları autochthon and Carboniferous to Lutetian Lycian nappes. They have measured temperatures of 24– 41 °C, specific electrical conductivities of 14,310–45,600 μS/cm, and are dominated by Na (1550–8500 mg/kg) and Cl (2725–15,320 mg/kg). The heat source of the geothermal systems of the area is tectonic related and the occurrence of the thermal springs is related to the young normal faults. Meteoric waters and seawaters recharge the reservoir rocks, are heated at depth with increasing geothermal gradient, and move up to the surface through the fractures and faults by convection trend and emerge as thermal springs. While thermal waters move up to the surface, they mix with different proportions of seawater and cold fresh waters. The seawater contribution to the thermal waters varies from 24% to 78%. Lake waters in the area are connected with thermal waters. Consequently, their chemical composition is influenced by the chemistry of thermal waters. Chemical equilibrium modelling based on measured outlet temperatures and measured pH shows that all the waters are oversaturated with respect to quartz and K-mica and undersaturated with respect to Al(OH)₃, anorthite, gypsum, siderite and SiO₂(a). Albite, alunite, aragonite, Ca-montmorillonite, calcite, chalcedony, chlorite, dolomite, Fe(OH)₃(a), fluorite, gypsum, illite, K-feldspar, kaolinite and sepiolite minerals are mostly oversaturated or undersaturated. Mineral saturation studies of the thermal springs indicate that dolomite, chalcedony and quartz are most likely to cause scaling at outlet conditions. Assessments from various chemical geothermometers, and Na–K–Mg ternary and mineral equilibrium diagrams suggest that the reservoir temperature is around 65–90 °C. The temperatures obtained from quartz, quartz-steam loss, Mg/Li geothermometers and mineral equilibrium diagrams give the most reasonable results.     

Geochemical constraint on origin and evolution of solutes in geothermal springs in western Yunnan,China

Geothermal resources are very rich in Yunnan, China. However, source of dissolved solutes in geothermal water and chemical evolution processes remain unclear. Geochemical and isotopic studies on geothermal springs and river waters were conducted in different petrological-tectonic units of western Yunnan, China. Geothermal waters contain Ca–HCO₃, Na–HCO₃, and Na (Ca)–SO₄ type, and demonstrate strong rock-related trace elemental distributions. Enhanced water–rock interaction increases the concentration of major and trace elements of geothermal waters. The chemical compositions of geothermal waters in the Rehai geothermal field are very complicated and different because of the magma chamber developed at the shallow depth in this area. In this geothermal field, neutral-alkaline geothermal waters with high Cl, B, Li, Rb Cs, As, Sb, and Tl contents and acid–sulfate waters with high Al, Mn, Fe, and Pb contents are both controlled by magma degassing and water–rock interaction. Geothermal waters from metamorphic, granite, and sedimentary regions (except in the Rehai area) exhibit varying B contents ranging from 3.31 mg/L to 4.49 mg/L, 0.23 mg/L to 1.24 mg/L, and <0.07 mg/L, respectively, and their corresponding δ¹¹B values range from −4.95‰ to −9.45‰, −2.57‰ to −8.85‰, and −4.02‰ to +0.06‰. The B contents of these geothermal waters are mainly controlled by leaching host rocks in the reservoir, and their δ¹¹B values usually decrease and achieve further equilibrium with its surrounding rocks, which can also be proven by the positive δ¹⁸O-shift. In addition to fluid–rock reactions, the geothermal waters from Rehai hot springs exhibit higher δ¹¹B values (−3.43‰ to +1.54‰) than those yielded from other areas because mixing with the magmatic fluids from the shallow magma. The highest δ¹¹B of steam–heated waters (pH 3.25) from the Zhenzhu spring in Rehai is caused by the fractionation induced by pH and the phase separation of coexisting steam and fluids. Given the strong water–rock interaction, some geothermal springs in western Yunnan show reservoir temperatures higher than 180 °C, which demonstrate potential for electricity generation and direct-use applications. The most potential geothermal field in western Yunnan is located in the Rehai area because of the heat transfer from the shallow magma chamber.     

Hydrogeochemical investigations of thermal waters in the northeastern part of Morocco

Northeastern Morocco is characterised by a large number of surface geothermal manifestations. Thermal waters are hosted within sedimentary rocks, and in particular the Liassic dolomitic limestones act as a reservoir. The presence of geothermal waters is closely related to important fault systems. Meteoric water infiltrates along those fractures and faults, gets heated, and then returns to the surface through hydrothermal conduits. Most of the thermal waters are of Na–Cl and Ca–Mg–HCO₃ types. In this paper different geochemical approaches were applied to infer the reservoir temperature. Na–K–Mg^1/2 ternary diagram points to temperatures ranging from 100 to 180 °C. Cation geothermometers suggest an average reservoir temperature of about 100 °C. Mineral solution equilibria analysis yields temperatures ranging from 50 to 185 °C. The silica enthalpy mixture model gives an average value (about 110 °C) higher than that inferred from cation geothermometers.     

Hydrochemical,isotopic, and reservoir characterization of the Pasinler (Erzurum) geothermal field,eastern Turkey

The reservoir temperature and conceptual model of the Pasinler geothermal area, which is one of the most important geothermal areas in Eastern Anatolia, are determined by considering its hydrogeochemical and isotope properties. The geothermal waters have a temperature of 51 °C in the geothermal wells and are of Na–Cl–HCO₃ type. The isotope contents of geothermal waters indicate that they are of meteoric origin and that they recharge on higher elevations than cold waters. The geothermal waters are of immature water class and their reservoir temperatures are calculated as 122–155 °C, and their cold water mixture rate is calculated as 32%. According to the δ¹³C_VPDB values, the carbon in the geothermal waters originated from the dissolved carbon in the groundwaters and mantle-based CO₂ gases. According to the δ³⁴S_CDT values, the sources of sulfur in the geothermal waters are volcanic sulfur, oil and coal, and limestones. The sources of the major ions (Na⁺, Ca²⁺, Mg²⁺, Cl^?, and HCO₃ ^?) in the geothermal waters are ion exchange and plagioclase and silicate weathering. It is determined that the volcanic rocks in the area have effects on the water chemistry and elements like Zn, Rb, Sr, and Ba originated from the rhyolite, rhyolitic tuff, and basalts. The rare earth element (REE) content of the geothermal waters is low, and according to the normalized REE diagrams, the light REE are getting depleted and heavy REE are getting enriched. The positive Eu and negative Ce anomalies of waters indicate oxygen-rich environments.     

Solute geothermometry of springs and wells of the Los Azufres and Las Tres Vírgenes geothermal fields,Mexico

Subsurface reservoir temperatures of two important Mexican geothermal systems (Los Azufres and Las Tres Vírgenes) were estimated by applying all available solute geothermometers for 88 and 56 chemical data measurements of the spring waters and fluids of the deep geothermal wells, respectively. Most of the chemical data for spring water of these two geothermal fields are for HCO₃ water, followed by SO₄ and Cl types. For the Los Azufres geothermal field (LAGF), the reservoir temperatures estimated by Na-K geothermometers for springs of HCO₃ and SO₄ waters, and by Na-Li and Li-Mg geothermometers for Cl water, are close to the average bottom-hole temperature (BHT) of the geothermal wells. However, all reservoir temperatures for spring waters from the Las Tres Vírgenes geothermal field (LTVGF) estimated by all solute geothermometers indicated significantly large differences (low temperatures) compared to the BHT. Evaluation of inferred reservoir temperatures for spring waters of the LAGF and LTVGF suggests that not all springs nor all solute geothermometers provide reliable estimation of the reservoir temperatures. Even though chemical equilibrium probably was not achieved in the water–rock system, Na-K geothermometers for HCO₃ water (peripheral water mainly of meteoric origin with little geothermal component) and SO₄ water (geothermal steam heated) and Na-Li and Li-Mg geothermometers for Cl-rich spring water (fully mature geothermal water) of the LAGF indicated reservoir temperatures close to the BHT. However, in comparison with the geothermometry of spring water of the LAGF and LTVGF, fluid measurements from geothermal wells of these two fields indicated reservoir temperatures in close agreement with their respective BHTs. For the best use of the solute geothermometry for spring water, it is advisable to: (1) chemically classify the springs based on water types; (2) identify and eliminate the discordant outlier observations by considering each water type as a separate sampled population; (3) apply all available solute geothermometers employing a suitable computer program such as SolGeo instead of using some specific, arbitrarily chosen geothermometers; and (4) evaluate the temperatures obtained for each solute geothermometer by considering the subsurface lithology, hydrological conditions, and BHTs or static formation temperatures whenever available.     

Geochemical and isotopic characteristics of fluids in the Niutuozhen geothermal field,North China

Niutuozhen geothermal field is located in the Jizhong graben, belonging to the northern part of Bohai Bay Basin in North China. Chemical and isotopic analyses were carried out on 14 samples of the geothermal fluids discharged from Neogene Minghuazhen (Nm), Guantao (Ng), and Jixianian Wumishan (Jxw) formations. The δ²H and δ¹⁸O in water, δ¹³C in CH₄, δ¹³C in CO₂, and ³He/⁴He ratio in the gases were analyzed in combination with chemical analyses on the fluids in the Niutuozhen geothermal field. The chemical and isotopic compositions indicate a meteoric origin of the thermal waters. The reservoir temperatures estimated by chemical geothermometry are in the range between 60 and 108 °C. The results show that the gases are made up mainly by N₂ (18.20–97.42 vol%), CH₄ (0.02–60.95 vol%), and CO₂ (0.17–25.14 vol%), with relatively high He composition (up to 0.52 vol%). The chemical and isotopic compositions of the gas samples suggest the meteoric origin of N₂, predominant crustal origins of CH₄, CO₂, and He. The mantle-derived He contributions are calculated to be from 5 to 8% based on a crust–mantle binary mixing model. The deep temperatures in the Jxw reservoir were evaluated based on gas isotope geothermometry to be in the range from 141 to 165 °C. The mantle-derived heat fraction in the surface heat flow is estimated to be in the range of 48–51% based on ³He/⁴He ratios.     

Environmental problems at the Nevşehir (Kozakli) geothermal field,central Turkey

The Kozakli–Nev?ehir geothermal field extends a long a NW–SE direction at SE of the Centrum of Kozakli. The area is not rugged and average elevation is 1,000 m. The Kozanözü Creek flows towards north of the area. In the Kozakli thermal Spa area, thermal waters are manifested along a valley with a length of 1.5 km and 200 m width. In this resort some hot waters are discharged with no use. The thermal water used in the area comes from wells drilled by MTA. In addition, these waters from wells are also utilized by hotels, baths and motels belonging to City Private Management, Municipality and private sector. The measured temperature of Kozakli waters ranges from 43–51°C in springs and 80–96°C in wells. Waters are issued in a wide swampy area as a small group of springs through buried faults. Electrical conductivity values of thermal spring and well waters are 1,650–3,595 μS/cm and pH values are 6.72–7.36. Kozakli cold water has an electrical conductivity value of 450 μS/cm and pH of 7.56. All thermal waters are dominated by Na⁺ and Cl–SO₄ while cold waters are dominated by Ca⁺² and HCO₃ ^?. The aim of this study was to investigate the environmental problems around the Kozakli geothermal field and explain the mechanisms of karstic depression which was formed by uncontrolled use of thermal waters in this area and bring up its possible environmental threats. At the Kozakli geothermal field a sinkhole with 30 m diameter and 15 m depth occurred in January, 17th 2007 at the recreation area located 20 m west of the geothermal well which belongs to the government of Nev?ehir province. The management of the geothermal wells should be controlled by a single official institution in order to avoid the creation of such karstic structures affecting the environment at the source area.