纤磷钙铝石类化合物:来自地球具工艺用途的材料(英文)

纤磷钙铝石类化合物系由自纤磷钙铝石CaAl3 (OH) 6(HPO4) (PO4)本身、经磷钙铝石CaAl3 (OH) 6(SO4) (PO4)到钾明矾石KAl3 (OH ) 6(SO4) 2 等的天然矿物族所组成的。它们表现出具有很大范围的阳离子置换系列 ,其中以Sr2 +和Ba2 +置换Ca2 +,REEs3 +置换Ca2 +和H+,As5 +置换P5 +,S6+/Se6+置换H+P5 +最为重要。随着置换的进行 ,其热动力学稳定性也逐渐增加。由此 ,纤磷钙铝石类化合物成为很能抗风化的矿物 ,在红土中尤其如此。厚的纤磷钙铝石层形成在闪长岩 (富Sr) ,碳酸盐岩 (富REEs)和含金石英脉 (富As)之上 ,从而保护整个磷酸盐红土 ,使之免受风化。以此方式 ,形成了桌状山脉或岛屿 ,他们具有未受覆盖的表面。这些“纤磷钙铝”石化合物为上述及其它元素形成一有效的地球化学障。“纤磷钙铝石”的这种天然地球化学固定作用可以用适当的母体或人工合成晶体来进行模拟 ,即通过金属阳离子交换或就地反应来模拟。这种固定作用还可用于处理天然和人造的放射性裂变产物、有毒的重金属元素、砷酸盐和硒酸盐、硫酸盐等。     

湖北竹山寒武纪碳硅质板岩中磷钙铝矾——纤磷钙铝石矿物的特征及研究意义

湖北竹山寒武纪碳硅质板岩层间破碎带内大量块状、结核状磷钙铝矾--纤磷钙铝石系列矿物,与绿松石伴生,是地表水淋滤作用形成的,化学成分分析显示,SO2-4浓度是磷钙铝矾--纤磷钙铝石系列矿物形成的决定因素.该系列矿物是一个复杂的多矿物组成的微晶集合体,主要矿物种属有磷铝矾、磷钙铝矾、纤磷钙铝石、沸水硅磷铝石等.该系列矿物磷和硫的含量高,能够吸附较丰富的多金属元素,并能聚集多种阴离子团,形成一道有效的地球化学障,对环境保护和生态学研究具有独特的意义.     

桂林某些岩溶洞穴矿物

洞穴矿物是在洞穴环境下由冷的地下水活动所产生的表生化学沉积作用产物。桂林地区(包括兴安—桂林—阳朔一带)岩溶洞穴中的次生矿物已发现有方解石、文石、石膏、氢氧磷灰石、磷铝石、磷铝钾石、磷钙铝石和半蛋白石等。文章中列举了这些矿物的偏光显微镜、化学分析、x光粉晶衍射、差热分析和扫描电镜等鉴定结果,并概要地探讨了其成因。      

电感耦合等离子体发射光谱法测定镍矿石中镍铝磷镁钙

样品用硝酸溶解,氢氟酸助溶,高氯酸冒烟除去氢氟酸,盐酸溶解盐类后,在选定的测量条件下用电感耦合等离子体发射光谱法( ICP - AES)测定镍矿中镍、铝、磷、镁、钙.选择Ni 221.6 nm、Al 396.1nm、P 178.2 nm、Mg 285.2 nm、Ca 393.3 nm分别作为镍、铝、磷、镁、钙的分析线;...     

浙江诸暨地开石矿中的磷铝锶石及其成因探讨

报道了赋存于上侏罗系蚀变凝灰岩型地开石矿床中的磷铝锶石矿物。它的含量不到３％。通过氢氟酸溶蚀，富集了磷铝锶石。用ＸＲＤ和ＩＲ研究了磷铝锶石的矿物学特征，并获得了良好ＩＲ图谱。     

浙江诸暨地开石矿床中的磷铝锶石及其成因探讨

报道了赋存于上侏罗系蚀变凝灰岩型地开石矿床中的磷铝锶石矿物。它的含量不到３％。通过氢氟酸溶蚀，富集了磷铝锶石。用ＸＲＤ和ＩＲ研究了磷铝锶石的矿物学特征，并获得了良好ＩＲ图谱。磷铝锶石矿物具有特征的３４７５ｃｍ－１和３０７０ｃｍ－１ＯＨ吸收峰可区别于其他同族矿物。这种磷铝锶石形成于成岩作用后期，晚于地开石。     

江西雅山富氟高磷花岗岩中的磷酸盐矿物及其成因意义

江西雅山黄玉锂云母花岗岩属典型的华南[富氟高磷花岗岩（P2O5＝0．15％－0．55％），表现为富氟（F＝1．07％－2．04％），强过铝性（A／NKC＝1．26－1．60），具有很高的Li,Rb,Cs,Be,Nb,Ta含量和很低的Y、REE含量.磷锂铝石是雅山黄玉锂云母花岗岩中的主要磷酸盐矿物，其产出与否同体的Li,Rb,Cs含量密切相关；磷锂铝石和长石矿物都是雅山黄玉锂云母花岗岩中磷的主要贮体，并且相互之间呈互补关系，当出现磷锂铝石时，磷锂铝石为全岩磷的主要贡献者，当无磷锂铝石晶出时，长石矿物为全岩磷的主要贡献者，体系的强过铝性以及很低的REE，Y，Ca含量使得磷灰石，独居石，磷钇矿都难以达到饱和结晶，磷灰石为少量出现，并且大部分为晚期形成；独居石和磷钇矿都为极少出现，反映出雅山岩体演化过程中具有独居石，磷钇矿等稀土磷酸盐矿物的结晶分离，铍磷酸盐矿物－羟磷铍钙石的出现反映了雅山黄玉锂云母花岗岩存在岩浆期后的含Be,Ca热液流体的作用。     

化学物相分析法测定瓮福磷尾矿中钙镁磷元素形态含量

用化学物相分析法测定瓮福磷尾矿中钙、镁、磷元素形态含量。结果表明,磷尾矿中钙主要以白云石的形式赋存,并有少量以方解石、磷酸盐形式存在;镁主要以白云石的形式赋存,并有少量以磷酸盐、硅酸盐形式存在;磷主要以磷灰石的形式赋存,并有少量以铁氧化物、独居石、磷钇矿形式存在。各元素形态加标回收率为97.6%~107.2%,相对标准偏差(RSD,n=12)为0.77%~4.85%。各元素形态分析结果表现出较好的稳定性,表明采用化学物相分析法测定瓮福磷尾矿中钙、镁、磷元素形态含量结果准确可靠。     

“美国苹果绿”的宝石学特征及矿物组成

近几年,珠宝市场上出现了一种＂美国苹果绿＂新玉石产品,其主要作为摆件和雕件销售,日益受到消费者的欢迎。＂美国苹果绿＂为苹果绿色,有的可见大小不同的白色斑点,折射率为1.560,密度为2.555g/cm3,与磷铝石的折射率（约1.560）和密度（2.500±0.080g/cm3）相近。通过常规宝石学检测、激光诱导离解光谱（LIBS）、红外吸收光谱和X射线粉末衍射等测试方法,确认该样品的主要矿物组成为磷铝石,含少量的磷钙铝石,白色斑点的主要矿物组成为隐晶质石英。初步断定,＂美国苹果绿＂应为产自美国的绿磷铝石。     

钙、铁、铝形态对岩溶石灰土磷有效性的影响

为揭示钙、铁、铝形态与岩溶地区土壤磷有效性关系,通过改进的BCR元素形态连续提取法获取石灰土不同发育阶段土壤矿质元素赋存形态,并分析与总磷及速效磷含量之间的相关关系。初步研究表明:石灰土壤中全磷和速效磷在石灰土发育过程呈降低趋势,从黑色石灰土到黄色石灰土,总磷降低了76.7%,速效磷减少了84.7%。石灰土总磷与速效磷同酸溶态、可还原态及残渣态钙,可氧化态铁、铝和可还原态铝显著正相关,而同总铁、总铝以及残渣态铝显著负相关,相关系数绝对值均达到0.9以上。随着石灰土发育进行,钙总量及其形态均降低,而铝、铁总量和形态呈增加趋势,可能导致岩溶地区石灰土磷及其有效性缺乏越发突出。      

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

电感耦合等离子体发射光谱法同时测定卤水中锂钠钾钙镁硼硫氯

建立了电感耦合等离子体发射光谱法(ICP-AES)同时测定碳酸盐型、硫酸盐型、氯化物型三种类型卤水中Li、Na、K、Ca、Mg、B、S、Cl等高低含量元素的分析方法。选择仪器最佳的工作条件为射频功率1400W,炬管位置位于-3,载气流量0.60 L/min。确定了各元素测定谱线,使用ICP-AES的双向观测模式、轴向观测模式测定Li、Ca、B、S、Cl以及低含量的K、Mg,径向观测模式测定高含量的Na、K、Mg,可确保卤水中不同含量的元素同时检出。Li、Na、K、Ca、Mg、B、S的检测下限为0.07～3.00 mg/L,Cl的测定下限为165mg/L。方法精密度(RSD,n=10)均小于5%,回收率为92.4%～109.7%。其中Na、K、Mg、S、Cl测定结果与传统方法测定结果基本吻合。     

Mass Fractions of S,Cu, Se,Mo, Ag,Cd, In,Te, Ba,Sm, W,Tl and Bi in Geological Reference Materials and Selected Carbonaceous Chondrites Determined by Isotope Dilution ICP‐MS

Mass fractions of S, Cu, Se, Mo, Ag, Cd, In, Te, Ba, Sm, W and Tl were determined by isotope dilution sector field ICP‐MS in the same sample aliquot of reference materials using HF‐HNO₃ digestion in PFA beakers in pressure bombs and glassy carbon vessels in a high‐pressure asher (HPA‐S) for comparison. Additionally, Bi was determined by internal standardisation relative to Tl. Because isobaric and oxide interferences pose problems for many of these elements, efficient chromatographic separation methods in combination with an Aridus desolvator were employed to minimise interference effects. Repeated digestion and measurement of geological reference materials (BHVO‐1, BHVO‐2, SCo‐1, MAG‐1, MRG‐1 and UB‐N) gave results with < 5% relative intermediate precision (1s) for most elements, except Bi. Replicates of NIST SRM 612 glass digested on a hot plate were analysed by the same methods, and the results agree with reference values mostly within 2% relative deviation. Data for the carbonaceous chondrites Allende, Murchison, Orgueil and Ivuna are also reported. Digestion in a HPA‐S was as efficient as in pressure bombs, but some elements displayed higher blank levels following HPA‐S treatment. Pressure bomb digestion yielded precise data for volatile S, Se and Te, but may result in high blanks for W.     

Slope hummock development, Fosheim Peninsula, Ellesmere Island, Nunavut, Canada

Slope hummocks, a type of nonsorted patterned ground, are composed of stratified, organic, silty sand, and develop through the interaction of niveo-eolian deposition, solifluction, slopewash, and vegetation growth. Fields of hummocks show consistent patterns: forms on convex slopes increase in height downslope until the channel is reached, whereas those on convexo-concave slopes increase on the upper convexity but are buried by niveo-eolian deposition downslope of the snowbank remnant. These trends can be reproduced using a simple numerical model based on measured slope and snow depth profiles, sediment concentrations in the snow and solifluction rates. The model indicates that hummocks transit slopes of 20-40 m in about 2-4 ka, a time-frame that is plausible given site emergence, measured rates of solifluction, and published dates for organic horizons within hummocks on northern Ellesmere Island. Sensitivity analyses show that long-term effect of climate warming on hummock heights may differ depending on whether it is accompanied by precipitation increase or decrease. The required combination of two-sided freezing to promote plug-like movement, incomplete vegetation cover and thin snow that enable eolian erosion during winter and spring, and vegetation growth in snow-bed sites to stabilize niveo-eolian deposits may explain why these forms are important regionally but apparently are not present throughout the Arctic.     

电感耦合等离子体发射光谱法测定钼矿石中钴铬铜钼镍铅锡钨钇锌

采用盐酸-硝酸-氢氟酸-高氯酸-柠檬酸处理样品,电感耦合等离子体发射光谱法同时测定钼矿中钴、铬、铜、钼、镍、铅、锡、钨、钇、锌10个元素,筛选了不同溶矿方法和仪器参数条件。测定的相对标准偏差(RSD,n=11)均小于3.0%,经国家一级钼矿标准物质分析验证,结果与推荐值吻合。