Uranium in supergene phosphorites

The distribution of uranium was studied in supergene phosphorites from the zones of the weathering of sedimentary and endogenous rocks, as well as in nonmarine coprolitic phosphorites and, to a lesser extent, phosphorites from ocean islands. These phosphorites show a diversity of the composition of their carbonate-apatite and structural characteristics. The uranium content ranges mostly from 5 to 100 ppm, with minimum and maximum values of 0.5 and 790 ppm. There is no correlation between the uranium content of a phosphorite and the type of rock with which it is connected. Lacustrine coprolitic phosphorites show elevated uranium contents (about 200 ppm). The maximum uranium content was detected in finely laminated phosphorite encrustations. The correlation analysis of the whole data set (63 samples) showed that uranium content is not correlated with any other component of phosphorites at a confidence level of 0.95. In contrast, there is a correlation between U and P₂O₅, CaO, and F for the combined set of samples from southern Siberian deposits. The significant correlation of U with Na₂O and CO₂ is variable both for southern Siberia on the whole and for particular deposits from this region.     

Uranium geochemistry and dating of Pacific island apatite

Uranium-series disequilibrium dating of island phosphate deposits is evaluated in terms of known associated coral ages, uranium geochemistry, and stratigraphic sequences as well as the concordance between the geochronometers ²³⁴U/²³⁸U, ²³⁰Th/²³⁴U and ²²⁶Ra/²³⁸U. U(VI) is the predominant oxidation state of uranium in island phosphorites and by analogy to the youngest surficial deposits, most of the uranium initially bound is in the form of U(VI) sorbed by surfaces from seawater. Insular deposits contain more organic matter than even very young ocean floor samples and this leads to a greater probability of reduction of available recoil uranium than occurs in marine deposits. As a consequence, R(VI) ? R(T) ? R(VI), where R represents the ²³⁴U/²³⁸U activity ratio. This situation is completely opposite from that observed for marine-origin phosphorites. We determined that a fraction of U(VI) in ancient insular phosphorites is very labile and lost to alkaline carbonate solutions with a uranium activity ratio even more depleted in ²³⁴U than the bulk R(VI).Most younger samples appear to have no more discordance between ²³⁴U/²³⁸U, ²³⁰Th/²³⁴U and ²²⁶Ra/²³⁸U than marine phosphorites of similar apparent age. Young, surficial atoll-rim apatite cements and unconsolidated phosphorites date in the range of 1500–8000 years B.P., consistent with the concept of partial submergence of low-lying coral islands prior to 2000 years B.P. Sub-surficial samples in the same environment date older at about 20,000 years B.P. Violation of the closed system assumption occurs in at least 6 out of 13 ancient (> 800,000 year) samples. Uranium-series disequilibrium dating of insular apatite shows some promise as a recorder of climatic/sea level events, but the assumptions necessary for valid ages must be carefully evaluated for each occurrence.     

Mineralogy and geochemistry of the Au-Ag ore deposits of the South Korean Peninsula

Pyrite and arsenopyrite are the predominant ore minerals in the Korean Au-Ag deposits of this study. The X _Ni ^py , X _Co ^py , X _Ni ^apy , and X _Co ^apy values range between 100 and 3,000 ppm, 200 and 6,000 ppm, 200 and 8,200 ppm, and 100 and 10,200 ppm, respectively. Most X _Ni ^py /X _Co ^py values fall in the field lower than values varying 0.16–1.30. Arsenopyrite also tends to prefer cobalt rather than nickel showing X _Ni ^apy /X _Co ^apy values between 0.20 and 1.40. The concentrations of minor elements in ores and gangue minerals vary 1–55 ppm Au and 1–1,120 ppm Ag for the former and 4–57 ppm Ni and 2–45 ppm Co for the latter. The Au/Ag ratio in ore has a good correlation to the Ni/Co ratio of arsenopyrite to gangue. The (Ni/Co)_py-(Ni/Co)_gangue and (Ni/Co)_apy-(Ni/Co)_gangue diagrams revealed that the values from the Korean Au-Ag deposits plot in the field lower than 900 °C which is the lowermost temperature determined by previous partitioning experiments.     

Mechanisms of uranium mineralization by the yeast Saccharomyces cerevisiae

We determined the association of uranium in yeast cells S. cerevisiae grown in medium containing high (1 g · L^-1) or low (0.2 g · L^-1) concentrations of phosphate after exposure for 96 h to a 4 × 10^-4 mol · L^-1 U(VI) solution at pH 3.2 or 4.7. The analysis was made using a field emission scanning electron microscope equipped with energy dispersive spectroscopy (FESEM-EDS), transmission electron microscopy (TEM), and visible diffuse reflectance spectrometry. Cells grown in the high-phosphate medium rapidly accumulated U(VI) from solution at pH 3.2 over the first 24 h, followed by a slow uptake until 96 h, whereas in cells grown in low-phosphate medium, U(VI) accumulation reached a steady state within 24 h. FESEM-EDS analyses revealed the formation of a U(VI)-bearing precipitate on the yeast cells grown in high-phosphate medium after only 48 h exposure; no precipitate was detected on cells grown in low-phosphate medium up to 96 h. These results suggest that sorption onto the cell surfaces was the dominant process initially. Analysis of the U(VI)-bearing precipitates by all three methods demonstrated the presence of H-autunite, HUO₂PO₄ · 4H₂O. Thermodynamic calculations suggest that the chemical compositions of the solutions containing yeast grown in high-phosphate medium were undersaturated with respect to H-autunite, but were supersaturated with ten times more U(VI) and P than were actually observed. Apparently, the sorbed U(VI) on the cell surfaces reacts with P released from the yeast to form H-autunite by local saturation. The U(VI) uptake by yeast cells grown in high phosphate medium at pH 4.7, along with the thermodynamic calculation, indicated that more H-autunite is precipitated in neutral pH solution than in acid solution. Thus, U(VI)-phosphate mineralization on the cells of microorganisms should be taken into account for predicting U(VI) mobility in the environment.     

The biogeochemical expression of deeply buried uranium mineralization in Saskatchewan, Canada

Ten kilometres from the eastern edge of the Athabasca Sandstone, near McClean Lake, uranium mineralization (locally up to 27% U₃O₈) lies 150 m beneath the surface at the unconformity between the Athabasca and crystalline basement.A biogeochemical survey of the area sampled A_H and B_F soil horizons, peat moss, and plant organs from the dominant species, viz. black spruce (Picea mariana), jack pine (Pinus banksiana), labrador tea (Ledum groenlandicum), and leather leaf (Chamaedaphne calyculata). Uranium concentrations in the ash of various media are surprisingly high: spruce twigs up to 154 ppm U; labrador tea and leather leaf stems around 100 ppm U. Conversely, labrador tea roots yield < 5 ppm U and spruce trunk wood usually < 1 ppm U. Soils give values of 1–3 ppm U. Contoured U values reveal that highest concentrations occur in plants growing above, but laterally displaced from the mineralization. Track-Etch data show a similar pattern. Upward migration of ions along steeply inclined fractures is invoked to explain the phenomenon. Other elements are present in varying concentrations, depending upon the plant species and the plant organ. High concentrations of several elements are recorded, most notably Cd and Ag in the conifers.     

The effect of calcium on aqueous uranium(VI) speciation and adsorption to ferrihydrite and quartz

Recent studies of uranium(VI) geochemistry have focused on the potentially important role of the aqueous species, CaUO₂(CO₃)₃²⁻ and Ca₂UO₂(CO₃)₃⁰(aq), on inhibition of microbial reduction and uranium(VI) aqueous speciation in contaminated groundwater. However, to our knowledge, there have been no direct studies of the effects of these species on U(VI) adsorption by mineral phases. The sorption of U(VI) on quartz and ferrihydrite was investigated in NaNO₃ solutions equilibrated with either ambient air (430 ppm CO₂) or 2% CO₂ in the presence of 0, 1.8, or 8.9 mM Ca²⁺. Under conditions where the Ca₂UO₂(CO₃)₃⁰(aq) species predominates U(VI) aqueous speciation, the presence of Ca in solution lowered U(VI) adsorption on quartz from 77% in the absence of Ca to 42% and 10% at Ca concentrations of 1.8 and 8.9 mM, respectively. U(VI) adsorption to ferrihydrite decreased from 83% in the absence of Ca to 57% in the presence of 1.8 mM Ca. Surface complexation model predictions that included the formation constant for aqueous Ca₂UO₂(CO₃)₃⁰(aq) accurately simulated the effect of Ca²⁺ on U(VI) sorption onto quartz and ferrihydrite within the thermodynamic uncertainty of the stability constant value. This study confirms that Ca²⁺ can have a significant impact on the aqueous speciation of U(VI), and consequently, on the sorption and mobility of U(VI) in aquifers.     

Approaches to surface complexation modeling of Uranium(VI) adsorption on aquifer sediments

Uranium(VI) adsorption onto aquifer sediments was studied in batch experiments as a function of pH and U(VI) and dissolved carbonate concentrations in artificial groundwater solutions. The sediments were collected from an alluvial aquifer at a location upgradient of contamination from a former uranium mill operation at Naturita, Colorado (USA). The ranges of aqueous chemical conditions used in the U(VI) adsorption experiments (pH 6.9 to 7.9; U(VI) concentration 2.5 · 10⁻⁸ to 1 · 10⁻⁵ M; partial pressure of carbon dioxide gas 0.05 to 6.8%) were based on the spatial variation in chemical conditions observed in 1999-2000 in the Naturita alluvial aquifer. The major minerals in the sediments were quartz, feldspars, and calcite, with minor amounts of magnetite and clay minerals. Quartz grains commonly exhibited coatings that were greater than 10 nm in thickness and composed of an illite-smectite clay with occluded ferrihydrite and goethite nanoparticles. Chemical extractions of quartz grains removed from the sediments were used to estimate the masses of iron and aluminum present in the coatings. Various surface complexation modeling approaches were compared in terms of the ability to describe the U(VI) experimental data and the data requirements for model application to the sediments. Published models for U(VI) adsorption on reference minerals were applied to predict U(VI) adsorption based on assumptions about the sediment surface composition and physical properties (e.g., surface area and electrical double layer). Predictions from these models were highly variable, with results overpredicting or underpredicting the experimental data, depending on the assumptions used to apply the model. Although the models for reference minerals are supported by detailed experimental studies (and in ideal cases, surface spectroscopy), the results suggest that errors are caused in applying the models directly to the sediments by uncertain knowledge of: 1) the proportion and types of surface functional groups available for adsorption in the surface coatings; 2) the electric field at the mineral-water interface; and 3) surface reactions of major ions in the aqueous phase, such as Ca²⁺, Mg²⁺, HCO₃⁻, SO₄²⁻, H₄SiO₄, and organic acids. In contrast, a semi-empirical surface complexation modeling approach can be used to describe the U(VI) experimental data more precisely as a function of aqueous chemical conditions. This approach is useful as a tool to describe the variation in U(VI) retardation as a function of chemical conditions in field-scale reactive transport simulations, and the approach can be used at other field sites. However, the semi-empirical approach is limited by the site-specific nature of the model parameters.     

U(VI) adsorption on natural iron-coated sands: comparison of approaches for modeling adsorption on heterogeneous environmental materials

Adsorption of U(VI) on 6 samples of natural Fe-rich sands from Oyster, VA was studied over a range of U(VI) concentrations (0.1–100 μM), pH values (3–7.6), and dithionite–citrate–bicarbonate (DCB) extractable amounts of Fe (3.1–12.3 μmol/g). Four modeling approaches were applied to represent the U(VI) adsorption data. Model I was a two-site, diffuse double layer, surface complexation model based on data for synthetic ferrihydrite [Geochim. Cosmochim. Acta 58 (1994) 5465–5478]. Considering the magnitude of approximations necessary for application of the laboratory-based model to natural sands, Model I was surprisingly accurate, as determined by the goodness of fit parameter, χ²/N of 53.1–22.2. Model II was based on the reactions and diffuse double layer treatment of Model I, but was calibrated to a portion of U(VI) adsorption data for each sand, and then used to predict adsorption data for the same sand under different experimental conditions. Model II did not increase the accuracy of the predictions made with Model I, χ²/N of 42.4–27.6. Models III and IV were four-site affinity spectrum models, without an explicit electric double layer model or explicit surface hydrolysis reactions. Model III was based on a discrete log K spectrum approach, and Model IV was obtained from adjusting all surface stability constants and site concentrations for all surface sites. Models III and IV represented the U(VI) adsorption data with the greatest accuracy, χ²/N ranged from 13.8 to 4.4. Model I provides evidence supporting the practice of using pure phase thermodynamic reaction constants for describing the adsorption characteristics of environmentally important sorbents in certain simple cases. Yet, affinity spectrum approaches (Models III and IV) become increasingly important as more accurate interpolation of adsorption data is necessary, the sorbent becomes increasingly complex, or the range of experimental conditions expands.     

The role of hydrogen bonding in the thermal expansion and dehydration of brushite,di-calcium phosphate dihydrate

The unit-cell and atomic parameters of perdeuterated brushite have been extracted from Rietveld analysis of neutron powder diffraction data within the temperature range 4.2 to 470 K. The thermal expansion of brushite is anisotropic, with the largest expansion along the b axis due principally to the effect of the O(1)···D(4) and O(3)···D(2) hydrogen bonds. Expansion along the c axis, influenced by the Ow1···D(5) interwater hydrogen bond, is also large. The high temperature limits for the expansion coefficients for the unit-cell edges a, b and c are 9.7(5) × 10^–6, 3.82(9) × 10^–5 and 5.54(5) × 10^–5 K^–1, respectively, and for the cell volume it is 9.7(1) × 10^–5 K^–1. The angle displays oscillatory variation, and empirical data analysis results in = 1.28(3) × 10^–6sin(0.0105 T) K^–1, within this temperature range. The evolution of the thermal expansion tensor of brushite has been calculated between 50 T 400 K. At 300 K the magnitudes of the principal axes are ₁₁ = 50(6) × 10^{–6 K–1}, ₂₂ = 26.7(7) × 10^–6 K^–1 and ₃₃ = 7.0(5) × 10^–6 K^–1. The intermediate axis, ₂₂, is parallel to b, and using IRE convention for the tensor orthonormal basis, the axes ₁₁ and ₃₃ have directions equal to (–0.228, 0, –0.974) and (–0.974, 0, 0.228) respectively. Under the conditions of these experiments, the onset of dehydration occurred at temperatures above 400 K. Bond valence analysis combined with assessments of the thermal evolution of the bonding within brushite suggests that dehydration is precipitated through instabilities in the chemical environment of the second water molecule.     

High-sensitive measurement of uranium LIII-edge X-ray absorption near-edge structure (XANES) for the determination of the oxidation states of uranium in crustal materials

The uranium L_III-edge XANES spectra for natural rocks at the concentration range of 0.96–124 mg kg⁻¹ were measured using a log spiral bent crystal Laue analyzer (BCLA) combined with a multi-element Ge detector. It was found that the quality of the XANES spectra using the BCLA was greatly improved due to a reduction of interfering fluorescence from major components such as Rb and Sr. The ratio of signal to background intensities in the U L_III-edge XANES spectra increased by a factor of 2.9–17 with the use of the BCLA, which greatly enhanced the detection limit for the speciation of the oxidation states of U or the U(IV)/U(VI) ratio of natural samples. In addition, it was demonstrated that the fluorescence XANES method coupled with the BCLA enable determination of the speciation of U for various natural samples such as acidic igneous rocks, ferromanganese nodules, sediments, and some sedimentary rocks such as shale and limestone.     

Late Triassic U-bearing and barren granites in the Miao'ershan batholith,South China: Petrogenetic discrimination and exploration significance

The Miao'ershan uranium ore district is one of the most important granite-hosted uranium producers in South China. There are several Triassic granite plutons in the Miao'ershan batholith, but uranium ore deposits mainly occur within the Douzhashan granitic body. Precise zircon U–Pb dating indicated that these Triassic granite plutons were emplaced during 204 to 215 Ma. The Douzhashan U-bearing granite lies in the central part of the Miao'ershan batholith, and has higher U contents (8.0 to 26.1 ppm, average 17.0 ppm) than the nearby Xiangcaoping granite (5.0 to 9.3 ppm, average 7.0 ppm) and the Yangqiaoling granite (6.4 to 18.3 ppm, average 11.5 ppm) in the south part of the batholith. The Douzhashan granite is composed of medium-grained two-mica granite, whereas the Xiangcaoping and Yangqiaoling granites are composed of porphyritic biotite granite. Both the Xiangcaoping and Douzhashan granites have high A/CNK ratios (> 1.10), high (⁸⁷Sr/⁸⁶Sr)_i ratios (> 0.720) and low ε_Nd(t) values (− 11.3 to − 10.4), suggesting that they belong to strongly peraluminous S-type granites. The Douzhashan granite has low CaO/Na₂O ratios, high Rb/Sr and Rb/Ba ratios, indicating a partial melting origin of clay-rich pelitic rocks. In contrast, the Xiangcaoping granite formed from clay-poor psammite-derived melt. The Yangqiaoling granite shows different geochemical characteristics with the Douzhashan and Xiangcaoping granites, indicating a different magma source. The Yangqiaoling granite has higher ε_Nd(t) of − 9.4 to − 8.3 and variable A/CNK values from 0.98 to 1.19, suggesting a mixture source of meta-sedimentary rocks and meta-igneous rocks. Crystallization fractionation is not the main mechanism for U enrichment in the Douzhashan granite. We suggest that U-rich pelitic rock sources may be the key factor to generate peraluminous U-bearing granites in South China. Searching for those granites which are reduced, strongly peraluminous and were derived from U-rich pelitic rocks, is the most effective way for exploring granite-hosted U deposits.     

Correlation of soil radon and uranium with indoor radon in the Albuquerque,New Mexico area

High indoor radon in approximately 30 percent of private dwellings in the Albuquerque, New Mexico area has been reported previously. The present study explains the areas of high indoor radon as a function of different soil and/or bedrock in the area. Soils were sampled during summer and winter periods using alpha track radon detectors. The values range from 40 to 890 pCi/I air at a depth of 38 cm. The gross mean average is 360 pCi/I for the area for summer readings and 200 pCi/I for winter readings; both values are well over the average U.S. soil radon values of approximately 100 pCi/I. Analyses of soil uranium show a range in values of 1–6 ppm, with a mean of 3.1 ppm. Thorium values range from 3.3 to 28.8 ppm, and Th/U ratios range from 2.9 to 4.6.These values for U, Th, and Th/U suggest that soil U and Th are close to the values reported for the Sandia granite, the source of most of the pediment on which Albuquerque is built. Soil infiltration rates range from ~6 × 10^–4 to 4.5 × 10^–3 cm/sec for the samples, and soil moisture content ranges from 1.4 to 7.2 percent. A fair correlation of summer soil radon with infiltration rate is noted. Correlation of soil radon with moisture content and/or with percent silt, silt + clay, clay size fraction material is not established by this study. Soil radon values do correlate with regions in the Albuquerque area where high indoor radon is common. A better correlation of high indoor radon values with soils developed immediately over bedrock is observed. Furthermore, all values of average soil and indoor radon increase significantly with proximity of the stations to the Sandia Mountains. Soil uranium also shows this trend. The data argue that regions of potentially high radon can thus be identified.     

Partition of cadmium and manganese between coexisting sphalerite and galena from some Japanese epithermal deposits

Sphalerites from Japanese epithermal Pb-Zn vein-type deposits, namely, Yatani, Oizumi and Hosokura, contain 2900–3400 ppm cadmium and 760–2100 ppm manganese. And galenas from the same deposits contain cadmium and manganese 19.2–26.9 ppm and 7.8–218.3 ppm, respectively. The temperatures, evaluated from the partition of cadmium between coexisting sphalerite and galena, are consistent within a total range of 150°C at maximum within an individual deposit. No systematic change with depth can be observed at the Shoko-hi vein, Hosokura mine and Hompi vein, Yatani mine. In several samples, the temperatures obtained from the partition of cadmium have been compared with those obtained from sulfur isotope fractionations. Iron content in sphalerite coexisting with pyrite indicates that the deposition of ore minerals at these deposits may have taken place from ore-forming solutions in which H₂S or HS^– was the predominant dissolved sulfur species, and the solutions may have been free from in situ oxidation or reduction.     

The effect of Si and Al concentrations on the removal of U(VI) in the alkaline conditions created by NH3 gas

Remediation of uranium in the deep unsaturated zone is a challenging task, especially in the presence of oxygenated, high-carbonate alkalinity soil and pore water composition typical for arid and semi-arid environments of the western regions of the U.S. This study evaluates the effect of various pore water constituencies on changes of uranium concentrations in alkaline conditions, created in the presence of reactive gases such as NH₃ to effectively mitigate uranium contamination in the vadose zone sediments. This contaminant is a potential source for groundwater pollution through slow infiltration of soluble and highly mobile uranium species towards the water table. The objective of this research was to evaluate uranium sequestration efficiencies in the alkaline synthetic pore water solutions prepared in a broad range of Si, Al, and bicarbonate concentrations typically present in field systems of the western U.S. regions and identify solid uranium-bearing phases that result from ammonia gas treatment. In previous studies (Szecsody et al. 2012; Zhong et al. 2015), although uranium mobility was greatly decreased, solid phases could not be identified at the low uranium concentrations in field-contaminated sediments. The chemical composition of the synthetic pore water used in the experiments varied for silica (5–250 mM), Al³⁺ (2.8 or 5 mM), HCO₃⁻ (0–100 mM) and U(VI) (0.0021–0.0084 mM) in the solution mixture. Experiment results suggested that solutions with Si concentrations higher than 50 mM exhibited greater removal efficiencies of U(VI). Solutions with higher concentrations of bicarbonate also exhibited greater removal efficiencies for Si, Al, and U(VI). Overall, the silica polymerization reaction leading to the formation of Si gel correlated with the removal of U(VI), Si, and Al from the solution. If no Si polymerization was observed, there was no U removal from the supernatant solution. Speciation modeling indicated that the dominant uranium species in the presence of bicarbonate were anionic uranyl carbonate complexes (UO₂(CO₃)₂⁻² and UO₂(CO₃)₃⁻⁴) and in the absence of bicarbonate in the solution, U(VI) major species appeared as uranyl-hydroxide (UO₂(OH)₃⁻ and UO₂(OH)₄⁻²) species. The model also predicted the formation of uranium solid phases. Uranyl carbonates as rutherfordine [UO₂CO₃], cejkaite [Na₄(UO2)(CO₃)₃] and hydrated uranyl silicate phases as Na-boltwoodite [Na(UO₂)(SiO₄)·1.5H₂O] were anticipated for most of the synthetic pore water compositions amended from medium (2.9 mM) to high (100 mM) bicarbonate concentrations.     

Mobile Pb-isotopes in Proterozoic sedimentary basins as guides for exploration of uranium deposits

Lead isotope ratios and associated trace element concentrations (U, Th and Pb) extracted by partial-leaching with 2% nitric acid from Proterozoic sandstones and basement rocks reveal much about the fluid evolution of sedimentary basins hosting unconformity-type uranium deposits. In addition, these techniques have great potential as a guide for exploration of uranium and other types of deposits in basins of any age. Isotope ratios of Pb in Proterozoic sandstones from basins known to contain high-grade uranium deposits are radiogenic at key geological localities and settings distal to known mineralization and particularly in altered zones proximal to mineralization. Sandstones completely cemented by quartz overgrowths typically have non-radiogenic Pb isotope ratios, indicating early closure of porosity and isolation of these rocks from later fluid events. Alternatively, the unconformity served as both a source of uranium and radiogenic Pb as well as an avenue for late-stage (<250–900 Ma) fluid flow. The mafic volcanic units, which are relatively reducing lithologies and therefore have removed uranium from basinal brines, have uranium-supported radiogenic Pb isotope ratios. Comparison of ²³⁸U/²⁰⁶Pb and ²⁰⁶Pb/²⁰⁴Pb ratios is useful in determining the timing and nature of U and Pb migration before, during and after mineralization in these basins. This comparison can be used to delineate the presence of radiogenic Pb isotope ratios that are not internally supported by uranium and thorium in rocks, eventually providing the explorationist with geochemical vectors that point toward sites of high potential for economic uranium mineralization.     

Speciation of naturally-accumulated uranium in an organic-rich soil of an alpine region (Switzerland)

Very high concentrations of uranium (up to 4000 ppm) were found in a natural soil in the Dischma valley, an alpine region in the Grisons canton in Switzerland. The goal of this study was to examine the redox state and the nature of uranium binding in the soil matrix in order to understand the accumulation mechanism. Pore water profiles collected from Dischma soil revealed the establishment of anoxic conditions with increasing soil depth. A combination of chemical extraction methods and spectroscopy was applied to characterize the redox state and binding environment of uranium in the soil. Bicarbonate extraction under anoxic conditions released most of the uranium indicating that uranium occurs predominantly in the hexavalent form. Surprisingly, the uranium redox state did not vary greatly as a function of depth. X-ray absorption near edge spectroscopy (XANES), confirmed that uranium was present as a mixture of U(VI) and U(IV) with U(VI) dominating. Sequential extractions of soil samples showed that the dissolution of solid organic matter resulted in the simultaneous release of the majority of the soil uranium content (>95%). Extended X-ray absorption fine structure (EXAFS) spectroscopy also revealed that soil-associated uranium in the soil matrix was mainly octahedrally coordinated, with an average of 1.7 axial (at about 1.76 Å) and 4.6 to 5.3 equatorial oxygen atoms (at about 2.36 Å) indicating the dominance of a uranyl-like (UO₂²⁺) structure presumably mixed with some U(IV). An additional EXAFS signal (at about 3.2 Å) identified in some spectra suggested that uranium was also bound (via an oxygen atom) to a light element such as carbon, phosphorus or silicon. Gamma spectrometric measurements of soil profiles failed to identify uranium long-life daughter products in the soil which is an indication that uranium originates elsewhere and was transported to its current location by water. Finally, it was found that the release of uranium from the soil was significantly promoted at very low pH values (pH 2) and increased with increasing pH values (between pH 5 and 9).     

Simultaneous determination of sulfide, polysulfides and thiosulfate as an aid to ore exploration

The interaction of water and sulfide minerals yields dissolved species which can be utilized to trace back the presence of sulfide minerals and associated minerals. Computer modeling and laboratory and field results show that the most characteristic dissolved species are hydrogen sulfide (H₂S, HS⁻), polysulfide ions (S_n²⁻) and thiosulfate (S₂O₃²⁻), derived from the hydrolysis of sulfide minerals. Typical concentration ranges are: 10⁻⁵ – 10⁻⁷ mole/l for hydrogen sulfide, 10⁻⁶ – 10⁻⁹ mole/l for polysulfides and 10⁻⁵ – 10⁻⁸ mole/l for thiosulfate. The chemical reactivity of these species at contact with air makes them difficult to assess unless determined immediately after sampling.These sulfur species can be determined rapidly and accurately in field conditions by simultaneous titration with mercuric chloride employing an Ag/Ag₂S electrode for the determination of the end points.The application to ore exploration is exemplified by the results of the research on roll-type uranium deposits in the southwest of France.     

Evidence of uranium biomineralization in sandstone-hosted roll-front uranium deposits, northwestern China

We show evidence that the primary uranium minerals, uraninite and coffinite, from high-grade ore samples (U₃O₈>0.3%) in the Wuyiyi, Wuyier, and Wuyisan sandstone-hosted roll-front uranium deposits, Xinjiang, northwestern China were biogenically precipitated and psuedomorphically replace fungi and bacteria. Uranium (VI), which was the sole electron acceptor, was likely to have been enzymically reduced. Post-mortem accumulation of uranium may have also occurred through physio-chemical interaction between uranium and negatively-charged cellular sites, and inorganic adsorption or precipitation reactions. These results suggest that microorganisms may have played a key role in formation of the sandstone- or roll-type uranium deposits, which are among the most economically significant uranium deposits in the world.     

Impact of phosphate on U(VI) immobilization in the presence of goethite

Past mining, processing, and waste disposal activities have left a legacy of uranium-contaminated soil and groundwater. Phosphate addition to subsurface environments can potentially immobilize U(VI) in-situ through interactions with uranium at mineral-water interfaces. Phosphate can induce the precipitation of low solubility U(VI)-phosphates, and it may enhance or inhibit U(VI) adsorption to iron(III) (oxy)hydroxide surfaces. Such surfaces may also facilitate the heterogeneous nucleation of U(VI)-phosphate precipitates. The interactions among phosphate, U(VI), and goethite (α-FeOOH) were investigated in a year-long series of experiments at pH 4. Reaction time, total U(VI), total phosphate, and the presence and absence of goethite were systematically varied to determine their effects on the extent of U(VI) uptake and the dominant uranium immobilization mechanism. Dissolved U(VI) and phosphate concentrations were interpreted within a reaction-based modeling framework that included dissolution-precipitation reactions and a surface complexation model to account for adsorption. The best available thermodynamic data and past surface complexation models were integrated to form an internally consistent framework. Additional evidence for the uptake mechanisms was obtained using scanning electron microscopy and X-ray diffraction. The formation and crystal growth of a U(VI)-phosphate phase, most likely chernikovite, UO₂HPO₄·4H₂O_(s), occurred rapidly for initially supersaturated suspensions both with and without goethite. Nucleation appears to occur homogeneously for almost all conditions, even in the presence of goethite, but heterogeneous nucleation was likely at one condition. The U(VI)-phosphate solids exhibited metastability depending on the TOTU:TOTP ratio. At the highest phosphate concentration studied (130 μM), U(VI) uptake was enhanced due to the likely formation of a ternary surface complex for low (∼1 μM) to intermediate (∼10 μM) TOTU concentrations and to U(VI)-phosphate precipitation for high TOTU (∼100 μM) concentrations. For conditions favoring precipitation, the goethite surface acted as a sink for dissolved phosphate that resulted in higher dissolved U(VI) concentrations relative to goethite-free conditions. Based on the total uranium and available sorption sites, a critical phosphate concentration between 15 μM and 130 μM was required for preferential precipitation of uranium phosphate over U(VI) adsorption.     

Petrology of Karoo volcanic rocks in the southern Lebombo monocline, Mozambique

The Karoo volcanic sequence in the southern Lebombo monocline in Mozambique contains different silicic units in the form of pyroclastic rocks, and two different basalt types. The silicic units in the lower part of the Lebombo sequence are formed by a lower unit of dacites and rhyolites (67–80 wt.% SiO₂) with high Ba (990–2500 ppm), Zr (800–1100 ppm) and Y (130–240 ppm), which are part of the Jozini–Mbuluzi Formation, followed by a second unit, interlayered with the Movene basalts, of high-SiO₂ rhyolites (76–78 wt.%; the Sica Beds Formation), with low Sr (19–54 ppm), Zr (340–480 ppm) and Ba (330–850 ppm) plus rare quartz-trachytes (64–66 wt.% SiO₂), with high Nb and Rb contents (240–250 and 370–381 ppm, respectively), and relatively low Zr (450–460 ppm). The mafic rocks found at the top of the sequence are basalts and ferrobasalts belonging to the Movene Formation. The basalts have roughly flat mantle-normalized incompatible element patterns, with abundances of the most incompatible elements not higher than 25 times primitive mantle. The ferrobasalt has TiO₂  4.7 wt.%, Fe₂O_3t = 16 wt.%, and high Y (100 ppm), Zr (420 ppm) and Ba (1000 ppm). The Movene basalts have initial (at 180 Ma) ⁸⁷Sr/⁸⁶Sr = 0.7052–0.7054 and ¹⁴³Nd/¹⁴⁴Nd = 0.51232, and the Movene ferrobasalt has even lower ⁸⁷Sr/⁸⁶Sr (0.70377) and higher ¹⁴³Nd/¹⁴⁴Nd (0.51259). The silicic rocks show a modest range of initial Sr-(⁸⁷Sr/⁸⁶Sr = 0.70470–0.70648) and Nd-(¹⁴³Nd/¹⁴⁴Nd = 0.51223–0.51243) isotope ratios. The less evolved dacites could have been formed after crystal fractionation of oxide-rich gabbroic cumulates from mafic parental magmas, whereas the most silica-rich rhyolites could have been formed after fractional crystallization of feldspars, pyroxenes, oxides, zircon and apatite from a parental dacite magma. The composition of the Movene basalts imply different feeding systems from those of the underlying Sabie River basalts.