Modelling cover deformation and decoupling during inversion,using the Mid-Polish Trough as a case study

Seismic sections across the NW part of the Polish Basin show that thrust faults developed in the sedimentary units above the Zechstein evaporite layer during basin inversion. These cover thrust faults have formed above the basement footwall. Based on the evolution of the basin, a series of scaled analogue models was carried out to study interaction between a basement fault and cover sediments during basin extension and inversion. During model extension, a set of normal faults originated in the sand cover above the basement fault area. The distribution and geometry of these faults were dependent on the thickness of a ductile layer and pre-extension sand layer, synkinematic deposition, the amount of model extension, as well as on the presence of a ductile layer between the cover and basement. Footwall cover was faulted away from the basement only in cases where a large amount of model extension and hanging-wall subsidence were not balanced by synkinematic deposition. Model inversion reactivated major cover faults located above the basement fault tip as reverse faults, whereas other extensional faults were either rotated or activated only in their upper segments, evolving into sub-horizontal thrusts. New normal or reverse faults originated in the footwall cover in models which contained a very thin pre-extension sand layer above the ductile layer. This was also the case in the highly extended and shortened model in which synkinematic hanging-wall subsidence was not balanced by sand deposition during model extension. Model results show that inversion along the basement fault results in shortening of the cover units and formation of thrust faults. This scenario happens only when the cover units are decoupled from the basement by a ductile layer. Given this, we argue that the thrusts in the sedimentary infill of the Polish Basin, which are decoupled from the basement tectonics by Zechstein evaporites, developed due to the inversion of the basement faults during the Late Cretaceous-Early Tertiary.     

Inversion of two-phase extensional basin systems during subduction of the Paleo-Pacific Plate in the SW Korean Peninsula:Implication for the Mesozoic “Laramide-style” orogeny along East Asian continental margin

During subduction, continental margins experience shortening along with inversion of extensional sedimentary basins. Here we explore a tectonic scenario for the inversion of two-phase extensional basin systems, where the Early-Middle Jurassic intra-arc volcano-sedimentary Oseosan Volcanic Complex was developed on top of the Late Triassic-Early Jurassic post-collisional sequences, namely the Chungnam Basin. The basin shortening was accommodated mostly by contractional faults and related folds. In the basement, regional high-angle reverse faults as well as low-angle thrusts accommodate the overall shortening, and are compatible with those preserved in the cover. This suggests that their spatial and temporal development is strongly dependent on the initial basin geometry and inherited structures.Changes in transport direction observed along the basement-sedimentary cover interface is a characteristic structural feature, reflecting sequential kinematic evolution during basin inversion. Propagation of basement faults also enhanced shortening of the overlying sedimentary cover sequences. We constrain timing of the Late Jurassic-Early Cretaceous(ca. 158-110 Ma) inversion from altered K-feldspar 40 Ar/39 Ar ages in stacked thrust sheets and K-Ar illite ages of fault gouges, along with previously reported geochronological data from the area. This "non-magmatic phase" of the Daebo Orogeny is contemporaneous with the timing of magmatic quiescence across the Korean Peninsula. We propose the role of flat/low-angle subduction of the Paleo-Pacific Plate for the development of the "Laramide-style" basement-involved orogenic event along East Asian continental margin.     

渤海湾盆地基岩地质图及其所包含的构造运动信息

利用油气勘探资料编制的渤海湾盆地基岩地质图 ,分析了基岩露头分布及其反映的中、新生代构造运动特征。基岩地质图显示渤海湾盆地基底岩层受印支运动和燕山运动影响发育有一系列近EW向、NNE—NE向的褶皱和逆断层等挤压构造变形。基岩露头展布表明渤海湾盆地西部、北部在侏罗纪之前的剥蚀作用明显强于东部和南部地区。基岩地层形成的区域褶皱轴向及各亚构造层之间的不整合面接触关系反映出在下—中三叠统沉积之后至下—中侏罗统沉积之前的某个“关键时刻”渤海湾地区发生了一次重要的构造变革 ,导致早期的近EW向构造被NNE—NE向构造替代。而从区域应力体制来看 ,下—中侏罗统沉积之后渤海湾地区的区域构造环境发生了重要变化 ,从中生代早期的挤压构造环境变为以裂陷作用为主的构造演化时期     

Different modes of the Late Cretaceous–Early Tertiary inversion in the North German and Polish basins

Several selected seismic lines are used to show and compare the modes of Late-Cretaceous–Early Tertiary inversion within the North German and Polish basins. These seismic data illustrate an important difference in the allocation of major zones of basement (thick-skinned) deformation and maximum uplift within both basins. The most important inversion-related uplift of the Polish Basin was localised in its axial part, the Mid-Polish Trough, whereas the basement in the axial part of the North German Basin remained virtually flat. The latter was uplifted along the SW and to a smaller degree the NE margins of the North German Basin, presently defined by the Elbe Fault System and the Grimmen High, respectively. The different location of the basement inversion and uplift within the North German and Polish basins is interpreted to reflect the position of major zones of crustal weakness represented by the WNW-ESE trending Elbe Fault System and by the NW-SE striking Teisseyre-Tornquist Zone, the latter underlying the Mid-Polish Trough. Therefore, the inversion of the Polish and North German basins demonstrates the significance of an inherited basement structure regardless of its relationship to the position of the basin axis. The inversion of the Mid-Polish Trough was connected with the reactivation of normal basement fault zones responsible for its Permo-Mesozoic subsidence. These faults zones, inverted as reverse faults, facilitated the uplift of the Mid-Polish Trough in the order of 1–3 km. In contrast, inversion of the North German Basin rarely re-used structures active during its subsidence. Basement inversion and uplift, in the range of 3–4 km, was focused at the Elbe Fault System which has remained quiescent in the Triassic and Jurassic but reproduced the direction of an earlier Variscan structural grain. In contrast, N-S oriented Mesozoic grabens and troughs in the central part of the North German Basin avoided significant inversion as they were oriented parallel to the direction of the inferred Late Cretaceous–Early Tertiary compression. The comparison of the North German and Polish basins shows that inversion structures can follow an earlier subsidence pattern only under a favourable orientation of the stress field. A thick Zechstein salt layer in the central parts of the North German Basin and the Mid-Polish Trough caused mechanical decoupling between the sub-salt basement and the supra-salt sedimentary cover. Resultant thin-skinned inversion was manifested by the formation of various structures developed entirely in the supra-salt Mesozoic–Cenozoic succession. The Zechstein salt provided a mechanical buffer accommodating compressional stress and responding to the inversion through salt mobilisation and redistribution. Only in parts of the NGB and MPT characterised by either thin or missing Zechstein evaporites, thick-skinned inversion directly controlled inversion-related deformations of the sedimentary cover. Inversion of the Permo-Mesozoic fill within the Mid-Polish Trough was achieved by a regional elevation above uplifted basement blocks. Conversely, in the North German Basin, horizontal stress must have been transferred into the salt cover across the basin from its SW margin towards the basins centre. This must be the case since compressional deformations are concentrated mostly above the salt and no significant inversion-related basement faults are seismically detected apart from the basin margins. This strain decoupling in the interior of the North German Basin was enhanced by the presence of the Elbe Fault System which allowed strain localization in the basin floor due to its orientation perpendicular to the inferred Late Cretaceous–Early Tertiary far-field compression.     

Structures along the Orobic thrust, Central Orobic Alps, Italy

A series of regional deformation phases is described for the metamorphic basement and the Permian cover in an area in the central Orobic Alps, northern Italy. In the basement deformation under low-grade amphibolite metamorphic conditions is followed by a second phase during retrograde greenschist conditions. These two phases predate the deposition of the Permian cover and are of probable Variscan age. An extensional basin formed on the eroded basement during the Late Carboniferous, filled with fan conglomerates and sandstones, and rhyolitic volcanic rocks. Well-preserved brittle extensional faults bound these basins. Further extension deformed basement and cover before the onset of Alpine compressional tectonics. Cover and basement were deformed together during two phases of compressional deformation of post-Triassic age, the first giving rise to tectonic inversion of the older extensional faults, the second to new thrust faults, both associated with south-directed nappe emplacement and regional folding. Foliations develop in the cover only during the first phase of deformation as part of the activity on “shortening faults”. Main activity on the Orobic thrust actually postdates the first phase of thrusting and foliation development in the cover.     

Polyphase structural evolution of the southwestern Argentine Precordillera

The western and southwestern parts of the Argentine Precordillera display complex geometries which are not consistent with those of a typical high-level fold-and-thrust belt. They are the result of a polyphase structural evolution which spans the Early Paleozoic to Late Tertiary period. After an Early Paleozoic folding and shearing event under a greenschist facies metamorphism, uplift, erosion, and deposition of Late Carboniferous to Early Permian clastics were accompanied by extensional faulting. This was followed by a Permian folding and faulting event which led to a partial inversion of the Late Carboniferous-Early Permian graben fill. Permian to Triassic crustal extension was combined with block faulting and the deposition of a thick volcanic sequence. The subsequent Late Tertiary crustal shortening partly reactivated older fault lines. Excluding folds, a few thrusts, and reverse faults, the crustal shortening within the older blocks was accommodated by a dominant sinistral strike-slip faulting under a W-E compressive regime. Above a major décollement, the entire sequence of faulted and folded blocks was carried from west to east towards its present position. The regional situation indicates that this southern part of the orogen was transferred further to the east with respect to the central thin-skinned parts. The movements are interpreted to be related to an important thrust fault which obliquely cuts through the fold-and-thrust belt.     

山东鲁西地块断裂构造分布型式与中生代沉积—岩浆—构造演化序列

鲁西地块的断裂构造有两类不同分布型式:一类呈放射状分布, 由陡倾、基底右行韧性剪切带和盖层内复杂力学性质的断裂组成; 另一类呈环绕地块基底核部同心环状分布, 由3个主要盖层伸展拆离带组成, 主滑脱面分别位于古生界盖层与基底间的不整合面、石炭系与奥陶系之间的平行不整合面和中新生代断陷-沉积岩系与新生代火山-沉积物之间的断层。中生代构造变形样式可以分为3个层次:印支期褶皱-逆冲推覆构造、燕山中期NNE轴向的隔槽式箱状褶皱和燕山晚期NW、NNE向共轭正断-走滑断裂。相应地鲁西地块经历了3个成盆期, 即早-中侏罗世、早白垩世和晚白垩世, 这些中生代盆地在空间上的叠置导致了地块内部复杂的盆-山耦合关系。鲁西地块中生代有两个岩浆活动集中时期, 即早侏罗世(约190Ma)和早白垩世(132~110Ma)。综合沉积记录、岩浆活动和构造变形过程, 将鲁西地块中生代构造演化历史划分为6个阶段:晚三叠世挤压变形, 早、中侏罗世弱伸展作用, 中、晚侏罗世挤压变形与地壳增厚作用, 早白垩世大陆裂谷与地壳伸展作用, 早白垩世末期挤压变形与盆地反转事件和晚白垩世区域隆升。这些构造演化阶段和构造事件对研究和理解中生代构造体制和深部岩石圈动力学转换过程具有重要意义。      

Neogene–Quaternary structures in the border zone between Alps, Dinarides and Pannonian Basin (Hrvatsko zagorje and Karlovac Basins, Croatia)

Analysis of Neogene-Quaternary structures from seismic lines, surface measurements and geological-mapping is presented from the border zone between the Alps, Dinarides and Pannonian Basin. First, Early Miocene extension was possibly characterised by ENE directed extension. It was partly synchronous with NW-SE shortening. Second, Middle Miocene extension was possibly characterised by NW-SE to WNW-ESE directed extension. Again, this event was followed by a new generation of thrusts related to end-Sarmatian shortening. The last, Late Miocene E-W to WNW-ESE directed extension was followed by a final shortening that created major, map-scale folds, basement pop-ups and inverted former basins. Geometry, onlap and thickness patterns of the youngest syn-tectonic basin fill indicate that this last, N-S to NW-SE directed shortening started in Late Pontian and continued up to the present time. When taking into account the wider surrounding area, it seems that the structures related to this latest shortening are arranged in often perpendicular directions, centred at the eastern end of the Periadriatic lineament. To explain this fan-like pattern of synchronous shortenings a kinematic model is proposed combining counter-clockwise rotation with north- or northwestward shift of the Dinaridic block with respect to the more stable Alpine buttress.     

The effects of pre-existing normal faults on thrust ramp development: An example from the northern Apennines,Italy

The Umbria-Marche foreland fold-and-thrust belt in the northern Apennines of Italy provides excellent evidence to test the hypothesis of synsedimentary-structural control on thrust ramp development. This orogenic belt consists of platform and pelagic carbonates, Late Triassic to Miocene in age, whose deposition was controlled by significant synsedimentary extension. Normal faulting, mainly active from Jurassic through Late Cretaceous-Paleogene time, resulted in significant lateral thickness variability within the related stratigraphic sequences. By Late Miocene time the sedimentary cover was detached from the underlying basement and was deformed by east-verging folds and west-dipping thrusts. Two restored balanced cross sections through the southernmost part of the belt show a coincidence between the early synsedimentary normal faults and the late thrust fault ramps. These evidences suggest that synsedimentary tectonic structures, such as faults and the related lithological lateral changes, can be regarded as mechanically important controlling factors in the process of thrust ramp development during positive tectonic inversion processes.     

Ancient synsedimentary structural control on thrust ramp development: an example from the Northern Apennines, Italy

The Umbria-Marche-Sabina foreland fold and thrust belt (Northern Apennines, Italy) provides excellent test-cases for the hypothesis of ancient syndepositional structural features controlling thrust ramp development. The sedimentary cover, Late Triassic to Miocene in age, is made of platform and pelagic carbonates, whose deposition was controlled by significant synsedimentary extension. Normal faulting, mainly during the Jurassic and the Late Cretaceous-Palaeogene, determined sensible lateral thickness variations within the relative sequences. By late Miocene the sedimentary cover was detached from its basement along a mainly evaporitic horizon, and was deformed by means of eastward-verging folds and thrusts.
In order to locate the points where thrust ramps branch-off the basal detachment, both line-length and equal-area techniques were used in the construction of a balanced cross-section through three major fault-related folds in southeastern Umbria. The nucleation of thrust ramps was controlled by the occurrence of Jurassic and Cretaceous-Palaeogene synsedimentary normal faults. These interrupted the lateral continuity of the evaporitic unit (the Late Triassic Anidriti di Burano Fm.) at the base of the sedimentary cover, and acted as obstacles to the eastward propagation of the thrust system, giving rise to major folds which originated from tip-line folding processes.
Therefore, the inferred relationships between ancient normal faults and late thrusts indicate that synsedimentary tectonic structures and the related lateral stratigraphic variations can be envisaged as mechanically important perturbations, which effectively control the nucleation and development of thrust ramps.     

Déformations néogènes et quaternaires de la bordure nord haut atlasique (Maroc): rôle du socle et consequences structurales

According to major discontinuities, continental deposits in the Cenozoic Atlas basins are subdivided into three groups (pre-, syn- and post-tectonic). Progressive unconformities are the main characteristic of the syntectonic formations, implying that the Atlas tectonic episode is synchronous with Neogene and Quaternary sedimentation. This tectonic episode is responsible for the inversion of Early Mesozoic extensional structures within the basement, which were reactivated into symmetrical thrusts or transpressional faults. Shortening of the basement induced the detachment of the cover. Deformation of the cover is expressed by thrust faults (with southern and northern vergences), folds and flexures linked to blind thrusts. Kinematic data show that the main regional compression was directed N150 ± 10° during the Neogene and north-south during the Quaternary. The involvement of the upper crust, in the Alpine Atlasic Belt, contributed to create areas of high relief. The High Atlas can be interpreted as resulting from large Cenozoic thrusts, and compared with the Pyrenean Axial Zone, although their pre-Cenozoic histories can differ markedly.     

Structural controls on the evolution of the Kutai Basin,East Kalimantan

The Kutai Basin formed in the middle Eocene as a result of extension linked to the opening of the Makassar Straits and Philippine Sea. Seismic profiles across the northern margin of the Kutai Basin show inverted middle Eocene half-graben oriented NNE–SSW and N–S. Field observations, geophysical data and computer modelling elucidate the evolution of one such inversion fold. NW–SE and NE–SW trending fractures and vein sets in the Cretaceous basement have been reactivated during the Tertiary. Offset of middle Eocene carbonate horizons and rapid syn-tectonic thickening of Upper Oligocene sediments on seismic sections indicate Late Oligocene extension on NW–SE trending en-echelon extensional faults. Early middle Miocene (N7–N8) inversion was concentrated on east-facing half-graben and asymmetric inversion anticlines are found on both northern and southern margins of the basin. Slicken-fibre measurements indicate a shortening direction oriented 290°–310°. NE–SW faults were reactivated with a dominantly dextral transpressional sense of displacement. Faults oriented NW–SE were reactivated with both sinistral and dextral senses of movement, leading to the offset of fold axes above basement faults. The presence of dominantly WNW vergent thrusts indicates likely compression from the ESE. Initial extension during the middle Eocene was accommodated on NNE–SSW, N–S and NE–SW trending faults. Renewed extension on NW–SE trending faults during the late Oligocene occurred under a different kinematic regime, indicating a rotation of the extension direction by between 45° and 90°. Miocene collisions with the margins of northern and eastern Sundaland triggered the punctuated inversion of the basin. Inversion was concentrated in the weak continental crust underlying both the Kutai Basin and various Tertiary basins in Sulawesi whereas the stronger oceanic crust, or attenuated continental crust, underlying the Makassar Straits, acted as a passive conduit for compressional stresses.     

Basin inversion by distributed deformation: the southern margin of the Bristol Channel Basin, England

Several models of basin inversion described in the literature are tested in a study of Triassic and Early Jurassic strata exposed along the southern margin of the Bristol Channel Basin in Somerset, England that has been exhumed by <3 km. Two key features of the superbly exposed normal faults are that they formed at several times during basin evolution—not during Triassic to Early Jurassic growth, but during Late Jurassic rifting, and during and after inversion; and that >95% of them are still in net extension, despite widespread kinematic evidence for reverse reactivation. When coupled with the general absence of thin-skinned thrusts and the widespread occurrence of regional contractional folds, it appears that none of three main inversion models—the fault-reactivation model, the thin-skinned model and the buttress model—are by themselves applicable. We erect a new model of basin inversion, the distributed deformation model, which consists of three stages of basin inversion. Stage one involved early partial reactivation of large-displacement steep normal faults. Stage two was dominated by folding, wherein fault blocks underwent oblique (non-coaxial) shortening by map scale folding, accompanied by formation of outer arc normal faults, minor cleavage and neoformed thrusts. Stage three involved reverse reactivation of outer arc normal faults and activation of oblique and strike-slip faults that partitioned deformation into compartments.     

Structural analysis of the Gachsar sub-zone in central Alborz range; constrain for inversion tectonics followed by the range transverse faulting

Analysis of the Gachsar structural sub-zone has been carried out to constrain structural evolution of the central Alborz range situated in the central Alpine Himalayan orogenic system. The sub-zone bounded by the northward-dipping Kandovan Fault to the north and the southward-dipping Taleghan Fault to the south is transversely cut by several sinistral faults. The Kandovan Fault that controls development of the Eocene rocks in its footwall from the Paleozoic–Mesozoic units in the fault hanging wall is interpreted as an inverted basin-bounding fault. Structural evidences include the presence of a thin-skinned imbricate thrust system propagated from a detachment zone that acts as a footwall shortcut thrust, development of large synclines in the fault footwall as well as back thrusts and pop-up structures on the fault hanging wall. Kinematics of the inverted Kandovan Fault and its accompanying structures constrain the N–S shortening direction proposed for the Alborz range until Late Miocene. The transverse sinistral faults that are in acute angle of 15° to a major magnetic lineament, which represents a basement fault, are interpreted to develop as synthetic Riedel shears on the cover sequences during reactivation of the basement fault. This overprinting of the transverse faults on the earlier inverted extensional fault occurs since the Late Miocene when the south Caspian basin block attained a SSW movement relative to the central Iran. Therefore, recent deformation in the range is a result of the basement transverse-fault reactivation.     

Jurassic extension and Cenozoic inversion tectonics in the Asturian Basin,NW Iberian Peninsula: 3D structural model and kinematic evolution

We constructed a geological map, a 3D model and cross-sections, carried out a structural analysis, determined the stress fields and tectonic transport vectors, restored a cross section and performed a subsidence analysis to unravel the kinematic evolution of the NE emerged portion of the Asturian Basin (NW Iberian Peninsula), where Jurassic rocks crop out. The major folds run NW-SE, normal faults exhibit three dominant orientations: NW-SE, NE-SW and E-W, and thrusts display E-W strikes. After Upper Triassic-Lower Jurassic thermal subsidence, Middle Jurassic doming occurred, accompanied by normal faulting, high heat flow and basin uplift, followed by Upper Jurassic high-rate basin subsidence. Another extensional event, possibly during Late Jurassic-Early Cretaceous, caused an increment in the normal faults displacement. A contractional event, probably of Cenozoic age, led to selective and irregularly distributed buttressing and fault reactivation as reverse or strike-slip faults, and folding and/or offset of some previous faults by new generation folds and thrusts. The Middle Jurassic event could be a precursor of the Bay of Biscay and North Atlantic opening that occurred from Late Jurassic to Early Cretaceous, whereas the Cenozoic event would be responsible for the Pyrenean and Cantabrian ranges and the partial closure of the Bay of Biscay.     

合肥盆地断层活动特征及其控制因素

利用断层活动速率法定量分析了合肥盆地主要近东西向断层的活动规律,并分析了它们形成与演化的控制因素。研究表明,盆地前侏罗系基底主要发育了近东西向、南倾的逆冲断层,属于印支期前陆变形的产物。这些断层的逆冲速率向南有规律的增加,指示其动力来自南部大别造山带的碰撞造山。盆地在侏罗纪期间接受大量沉积时,并没有发生明显的断裂活动,指示属于前陆拗陷型盆地,其对应着大别造山带的快速隆升。盆地在早白垩世至古近纪期间演变为断陷盆地,印支期基底的逆断层转变为正断层活动。这些盆地内主要的近东西向正断层的伸展活动在早白垩世呈现北强南弱,而随后转变为南强北弱的变化趋势。     

Structural inversion and its controls : examples from the Alpine foreland and the French Alps

Abstract

Positive structural inversion involves the uplift of rocks on the hanging-walls of faults, by dip slip or oblique slip movements. Controlling factors include the strike and dip of the earlier normal faults, the type of normal faults — whether they were listric or rotated blocks, the time lapsed since extension and the amount of contraction relative to extension. Steeply dipping faults are difficult to invert by dip slip movements; they form buttresses to displacement on both cover detachments and on deeper level but gently inclined basement faults. The decrease in displacement on the hanging-walls of such steep buttresses leads to the generation of layer parallel shortening, gentle to tight folds — depending on the amount of contractional displacement, back-folds and back-thrust systems, and short-cut thrust geometries — where the contractional fault slices across the footwall of the earlier normal fault to enclose a “floating horse”. However, early steeply dipping normal faults readily form oblique to strike slip inversion structures and often tramline the subsequent shortening into particular directions.

Examples are given from the strongly inverted structures of the western Alps and the weakly inverted structures of the Alpine foreland. Extensional faulting developed during the Triassic to Jurassic, during the initial opening of the central Atlantic, while the main phases of inversion date from the end Cretaceous when spreading began in the north Atlantic and there was a change of relative motion between Europe and Africa. During the mid-Tertiary well over 100 km of Alpine shortening took place; Alpine thrusts, often detached along, or close to, the basement-cover interface, stacking the late Jurassic to Cretaceous sediments of the post-extensional subsidence phase. These high level detachments were joined and breached by lower level faults in the basement which, in the external zones of the western Alps, generally reactivated and rotated the earlier east dipping half-graben bounding faults. The external massifs are essentially uplifted half-graben blocks. There was more reactivation and stacking of basement sheets in the eastern part of this external zone, where the faults had been rotated into more gentle dips above a shallower extensional detachment than on the steeper faults to the west.

There is no direct relationship between the weaker inversion of the Alpine foreland and the major orogenic contraction of the western Alps; the inversion structures of southern Britain and the Channel were separated from the Alps by a zone of rifting from late Eocene to Miocene which affected the Rhone, Bresse and Rhine regions. Though they relate to the same plate movements which formed the Alps, the weaker inversion structures must have been generated by within plate stresses, or from those emanating from the Atlantic rather than the Tethyan margin.     

Oblique tectonic inversion and basement thrusting in the Cameros Massif (Northern Spain)

Abstract

We present the structural study of the Cameros Massif (NW Iberian Chain, Spain), taking into account data from surface geology, deep boreholes and seismic reflection profiles. The main structural feature is a single, I50km-long thrust with a 20-30 km horizontal displacement towards the N-NNW. In the hangingwall the up to 5.000m. thick Mesozoic (Jurassic-Cretaceous) cover forms the Cameros Massif and the Variscan basement constitutes the Sierra de la Demanda to the west of the Cameros Massif. The foreland is the western sector of the Ebro Basin filled with continental Tertiary deposits that reach a maximum thickness of 4.000-5.000m. An important detachment level is constituted by the Keuper marls and gypsum. The age of compression ranges from the Oligocene to the lower part of the Upper Miocene. The Tertiary compressive structures fit into a large-scale process of tectonic inversion : a) An extensional stage with a NE-SW extension direction took place during the Upper Jurassic-Lower Cretaceous, giving rise to the development of the strongly subsiding half-graben Cameros Basin, b) The Tertiary N-S compression brought about a crustal shortening and the transport of the Cameros block towards the Ebro Basin. The NW-SE striking main normal faults that controlled the deposition in the Mesozoic basin during the extensional stage were reactivated as oblique ramps during the Tertiary compressive stage.     

Salt redistribution during extension and inversion inferred from 3D backstripping

A 3D backstripping approach considering salt flow as a consequence of spatially changing overburden load distribution, isostatic rebound and sedimentary compaction for each backstripping step is used to reconstruct the subsidence history in the Northeast German Basin. The method allows to determine basin subsidence and the salt-related deformation during Late Cretaceous–Early Cenozoic inversion and during Late Triassic–Jurassic extension. In the Northeast German Basin, the deformation is thin-skinned in the basinal part, but thick-skinned at the basin margins. The salt cover is deformed due to Late Triassic–Jurassic extension and Late Cretaceous–Early Cenozoic inversion whereas the salt basement remained largely stable in the basin area. In contrast, the basin margins suffered strong deformation especially during Late Cretaceous–Early Cenozoic inversion. As a main question, we address the role of salt during the thin-skinned extension and inversion of the basin. In our modelling approach, we assume that the salt behaves like a viscous fluid on the geological time-scale, that salt and overburden are in hydrostatical near-equilibrium at all times, and that the volume of salt is constant. Because the basement of the salt is not deformed due to decoupling in the basin area, we consider the base of the salt as a reference surface, where the load pressure must be equilibrated. Our results indicate that major salt movements took place during Late Triassic to Jurassic E–W directed extension and during Late Cretaceous–Early Cenozoic NNE–SSW directed compression. Moreover, the study outcome suggests that horizontal strain propagation in the salt cover could have triggered passive salt movements which balanced the cover deformation by viscous flow. In the Late Triassic, strain transfer from the large graben systems in West Central Europe to the east could have caused the subsidence of the Rheinsberg Trough above the salt layer. In this context, the effective regional stress did not exceed the yield strength of the basement below the Rheinsberg Trough, but was high enough to provoke deformation of the viscous salt layer and its cover. During the Late Cretaceous–Early Cenozoic phase of inversion, horizontal strain propagation from the southern basin margin into the basin can explain the intensive thin-skinned compressive deformation of the salt cover in the basin. The thick-skinned compressive deformation along the southern basin margin may have propagated into the salt cover of the basin where the resulting folding again was balanced by viscous salt flow into the anticlines of folds. The huge vertical offset of the pre-Zechstein basement along the southern basin margin and the amount of shortening in the folded salt cover of the basin indicate that the tectonic forces responsible for this inversion event have been of a considerable magnitude.     

Salt tectonics in pull-apart basins with application to the Dead Sea Basin

The Dead Sea Basin displays a broad range of salt-related structures that developed in a sinistral strike-slip tectonic environment: en échelon salt ridges, large salt diapirs, transverse oblique normal faults, salt walls and rollovers. Laboratory experiments are used to investigate the mechanics of salt tectonics in pull-apart systems. The results show that in an elongated pull-apart basin the basin fill, although decoupled from the underlying basement by a salt layer, remains frictionally coupled to the boundary. The basin fill, therefore, undergoes a strike-slip shear couple that simultaneously generates en échelon fold trains and oblique normal faults, trending mutually perpendicular. According to the orientation of basin boundaries, sedimentary cover deformation can be dominantly contractional or extensional, at the extremities of pull-apart basins forming either folds and thrusts or normal faults, respectively. These guidelines, applied to the analysis of the Dead Sea Basin, show that the various salt-related structures form a coherent set in the frame of a sinistral strike-slip shearing deformation of the sedimentary basin fill.