我国的第一批含金刚石金云火山岩──为贵州已知的含金刚石岩石正名

重新研究贵州已知的含金刚石岩石表明，无论是其岩石学、矿物学和地球化学特征还是其产出的大地构造背景都与典型的金伯利岩不符，但却具有某些金云火山岩的典型特征，如：所含的大量镁铝榴石都不是金伯利岩特有的Ｇ１０，而是Ｇ９；岩石中含有属于金云火山岩所特有的白榴石、碱镁闪石及金伯利岩所不应有的长石类矿物；岩石不具金伯利岩所特有的圆斑结构等；贵州的大地构造背景与金伯利岩产出的典型背景不符，不是Ａ型克拉通，而是古老的环克拉通活动带（Ｔ型克拉通），与西澳含金刚石金云火山岩产出的背景相似。为此，笔者指出：贵州已知的含金刚石岩石应正名为金云火山岩；贵州具备金云火山岩型金刚石原生矿的成矿条件。进一步分析表明，贵州的某些地段在金刚石成矿后，还在一定程度上具备保存条件，这就给我省今后的金刚石找矿工作提供了前提。本文还进一步指出：有利的找矿部位是东西向的超壳断裂带，尤其是其中加里东期古地面上的后加里东盖层已遭剥蚀但该古地面所受剥蚀程度又不深的地段。     

鲁西蒙阴地区含金刚石金伯利岩的岩浆侵入序列及成矿模式

鲁西蒙阴地区是我国金刚石原生矿重要产地之一,其含金刚石金伯利岩命名为常马庄单元。本文对该区金伯利岩地质特征进行了梳理,按岩石命名原则对该地区含金刚石金伯利岩不同岩石类型进行了重新划分和命名,共划分了细斑微粒金伯利玢岩类、粗斑细微粒金伯利玢岩类和含碎屑细斑或中细斑微粒金伯利玢岩类3个岩石类型和13个亚类型,同时首次从早至晚划分了细斑微粒金伯利玢岩类→含围岩角砾中细斑微粒金伯利玢岩类→粗斑细微粒金伯利玢岩类的侵入序列。通过对前人研究资料的综合分析并结合野外实地考察认为:以前套用南非金伯利岩型金刚石原生矿中心式火山喷发型成矿模式作为蒙阴地区含金刚石金伯利岩的成矿模式不符合该区实际地质特征。提出了该区金刚石金伯利岩新的成矿模式为中心式—裂隙式复合潜火山隐爆岩浆序次侵入充填型岩浆侵入角砾岩筒及其伴生的岩脉、岩床模型。     

辽南斑状金伯利岩岩相学特征及其成因研究

辽南金伯利岩岩区是我国最大的原生金刚石矿产区,该区金刚石主要寄主岩石类型为斑状金伯利岩。橄榄石是金伯利岩中最重要的造岩矿物,根据其结构特征可以分为橄榄石粗晶、橄榄石斑晶以及基质中微细粒三个世代。本文将岩相学特征和前人研究成果相结合,构建辽南斑状金伯利岩岩浆起源、上升、喷发和成岩模型,探讨各世代矿物的形成过程。具体包括：深部交代地幔部分熔融,形成初始碳酸盐岩浆;初始岩浆上升过程中捕获的岩石圈地幔橄榄岩不断溶解(形成橄榄石粗晶),岩浆成分发生改变,成为金伯利岩岩浆;金伯利岩岩浆迅速上升侵位,至地表处爆破喷发,最后冷却固结形成包含粗晶及其他两个世代橄榄石的斑状金伯利岩。     

麻江隆昌地区金云火山岩含金刚石性浅析

麻江隆昌金云火山岩（下称岩体）的基本化学组分、微量元素含量及岩石稀土元素富集程度分馏特征等方面与一般金云火山岩（钾镁煌斑岩）、金伯利岩有相似之处，但却存在本质区别。岩体中铬尖晶石的主元素二元相关图与超基性角砾岩或超基性煌斑岩相同，说明岩体岩石属性既不是金伯利岩，也不是典型的金云火山岩。岩石中缺乏与金刚石共生的Ｓ１、Ｓ２组铬尖晶石，因此岩体应属含金刚石性差或不含金刚石的金云火山岩。     

山东金伯利岩同位素地球化学特征的初步研究

本文对山东省蒙阴地区金伯利岩及金刚石,分别就sm-Nd、Rb-sr、C、O等同位素特征进行了初步研究。提出山东金伯利岩与世界其它地区一些金伯利岩中产出的金刚石,其δ~(13)C值完全一致,并认为金刚石的碳来源于上地幔,金刚石的的生长是不连续的。通过对金伯利岩Sm、Nd、Rb、Sr等的研究认为,山东金伯利岩来源于富集型上地幔,且有向亏损型上地幔转换的趋势;山东金伯利岩的岩石类型复杂多样,除金伯利岩自身原因外,另一原因是金伯利岩在上侵过程中与壳层岩石发生了同位素的强烈交代混染作用。     

辽宁瓦房店金刚石矿床50号岩管地质特征及找矿预测

以辽宁瓦房店金刚石矿床50号岩管为例,系统分析了该矿床的地质特征。通过对斑状富金云母金伯利岩、含围岩角砾斑状金伯利岩和金伯利凝灰角砾岩进行岩石地球化学分析发现: 碳酸盐化金伯利凝灰角砾岩超基性成分较少,滑石化、蛇纹石化及碳酸盐化混合金伯利凝灰角砾岩超基性成分较多; 铬、镍、钛在金伯利凝灰角砾岩中的含量较低,在含围岩角砾斑状金云母金伯利岩中的含量略高,在斑状富金云母金伯利岩和斑状金伯利岩中的含量最高。该矿床主要为含围岩角砾斑状金伯利岩和斑状富金云母金伯利岩,其次为金伯利凝灰角砾岩、含围岩角砾斑状金云母金伯利岩和含金伯利物质角砾岩。含铬镁铝榴石、铬铁矿和碳硅石是金刚石的伴生矿物。水平方向上,金伯利岩含矿品位西部较富,东部较贫; 垂直方向上,金伯利岩含矿品位变化较小。通过三维建模,推测50号岩管不是根部相,而是受EW向推覆构造作用影响发生的断层错位,在其东侧600 m深处存在50-1号金伯利岩体。     

金伯利质岩管的认识及其找矿意义

金伯利岩是世界上分布较少和较难寻找的岩石。因其含有金刚石, 具经济价值,含有地幔捕虏体,给科学界带来地壳深部和上地幔信息,一直为地学界所关注。金伯利岩多呈管状产出,岩管中含有来自上地幔的同源包体以及上升通道周边各种岩石的捕虏体,火山爆发所形成的火山碎屑的复杂性造成其岩石命名有多种不同的认识,有关术语及其用法非常多。在研究国内外关于金伯利岩成果的基础之上,本文将术语用法和岩石命名原则进行分析和总结,解剖三种类型金伯利质岩管在纵向上的变化,分析在中国所发现的含金刚石的金伯利质岩管的特征和分析可能存在的金刚石砂矿。     

辽宁永宁地区含金刚石闪长质岩石显微特征及金刚石来源探讨

辽宁永宁地区发育一套闪长质火山岩，该岩石中曾选获金刚石及其指示矿物，因此成为辽宁省金刚石第Ⅳ成矿带。通过对该岩石矿物组成及其显微结构构造特征研究，表明：(1)闪长质岩石中的斑晶斜长石具有环带结构；(2)橄榄石及金云母具有多世代性，且目估橄榄石+金云母含量在10%以上，局部更为富集；(3)出现“橄榄石+金云母+石榴石”与“斜长石+辉石+角闪石”不平衡的矿物组合；(4)发现橄榄石有碎斑结构和金伯利岩角砾。初步认为，永宁地区的闪长质岩浆在上升过程中捕获了早先已形成的金伯利岩并与之发生熔融混合作用，金刚石来自于深部的金伯利岩。这一认识对该地区寻找金刚石原生矿具有启示意义。     

我国金伯利岩型金刚石矿床的若干地质特征及其找矿标志

金伯利岩型金刚石矿床是世界上重要的金刚石矿床类型:也是我国迄今所发现的唯一的金刚石原生矿床类型。本文阐述了我国金伯利岩分布的构造部位、时代、产状、与暗色岩类的关系、围岩及其蚀变特征、岩管的岩相特征、岩石类型及岩石化学特征,并指出了该类矿床的找矿标志。     

山东金刚石原生矿成矿规律研究

山东金刚石矿主要分布于蒙阴地区与郯城地区。根据2009年矿产资源利用现状调查资料,山东省有金刚石矿产地9处,其中金伯利岩型原生矿4处,砂矿5处。截止2015年底,山东省保有资源储量为1357万ct,其中常马金刚石原生矿资源量为326万ct,西峪金刚石原生矿资源量为1031万ct。虽然含金刚石的岩石类型很多,但到目前为止,仅有金伯利岩和钾镁煌斑岩（橄榄金云火山岩）可以形成具有工业意义的金刚石原生矿。在山东境内,目前仅有金伯利岩可形成具有工业意义的金刚石原生矿。由于山东金刚石原生矿皆赋存在金伯利岩中,因此研究与寻找金伯利岩是寻找金刚石原生矿的前提条件。鉴于此,对金伯利岩的赋存规律的研究,对金刚石进行成矿预测与指导找矿,都具有极为重要的意义。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

Regional distribution of Al,B, Ba,Ca, K,La, Mg,Mn, Na,P, Rb,Si, Sr,Th, U and Y in terrestrial moss within a 188,000 km2 area of the central Barents region: influence of geology,seaspray and human activity

Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km² area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).     

NEW SET OF LOW CONCENTRATION STANDARDS FOR LA, CE, SM, YB, LU, Y, SC, V, NB AND TA IN SILICATES

We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al₂O₃-SiO₂ ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses.     

Mountains,nations, parks,and conservation

Between 1985 and 1991, two new mountain protected areas (MTNPA) covering more than 35,000 km² and based on participatory management models — the Makalu-Barun National Park and Conservation Area, Nepal, and Qomolangma Nature Preserve, Tibet Autonomous Region — were successfully established through the collaborative efforts of Woodlands Mountain Institute and conservationists in China and Nepal. Characteristics common to both projects include the importance of establishing (1) effective rationales, (2) local support constituencies, (3) a senior advisory group, (4) a task force, (5) linkages between conservation and development, and (6) fund raising mechanisms. The lessons derived from the experiences of Woodlands Mountain Institute are of significant value to others in preserving MTNPA. Increased collaboration and communication between all interested in conservation, however, will remain a critical component for expanding mountain protected area coverage to throughout the world.