桐柏-大别山区高压变质相的构造配置

作为华北和扬子陆块间的碰撞造山带桐柏大别山区以发育高压、超高压变质带为特征,从南到北变质相从低级到高级,代表俯冲带深度不同的变质产物,整体形成高压变质相系列。不过现今各变质相岩石的分布极受后期地壳规模的伸展构造控制,大别杂岩的穹隆作用更使高压变质相带的空间分布复杂化。超高压变质岩今日多呈大小不等的块体嵌布于相对低压的大别杂岩之内,造山带根部物质的热软化,使许多深层地幔物质得以像挤牙膏一样挤出于大别杂岩内。它们之中广泛发育着减压退变质的显微结构,与大别杂岩内一些麻粒岩相表壳岩所保存的减压退变质证迹一样,同是挤出作用和碰撞后隆升的构造证迹。高压相系的发育使南桐柏山和大别山迥然不同于桐商（ 商丹） 断裂以北的北秦岭北淮阳变质带。新近发表的同位素年代学（４０Ａｒ ３９ Ａｒ） 资料：３１６ ～４３４ Ｍａ ,已证明北秦岭是古生代变质带,它与桐柏－ 大别印支期碰撞造山带差异甚大。这两个变质地温梯度差异甚大的变质地体的拼合,说明华北和扬子陆块碰撞的主缝合带是商丹－ 桐商断裂带     

中国桐柏大别构造带变质演化的岩石学证迹

桐柏大别构造带是秦岭造山带的东延部分，经历过多期次不同体制的构造运动，现今的桐柏大别山区是由一系列变质地体拼合而成，地体与地体之间为断层或韧性剪切带所围限各地体有自身变质变形史和PTt轨迹，但却有着碰撞造山带所共有的后造山抬升过程。本文揭示了随县群、红安岩群及大别杂岩中柯石英榴辉石、蓝晶铝直闪石片岩及紫苏石榴黑云母片麻岩的退变质再平衡结构特点。报道了大别山麻粒岩相变质年龄为1699Ma。各类岩石减压退变质再平衡结构，标志着后造山的隆升过程及其对桐柏大别构造带变质演化的启示。     

大别山超高压变质岩的退变质赤微构造：折返过程的启示

大别山超高压变质岩中发现了一系列退变质显微构造,其主要类型有：①由于出溶而产生的定一包裹物;②由于多型转变而产生的假像替代;③固→固反应产生的冠状体;④涉及流体的退变质反应产生的冠状体或后成合晶。借助显微构造关系,可以建立超高压变质岩的退变质演化阶段,从而构筑其ＰＴ演化趋势、识别出碰撞造山和超高压变质峰期之后的两阶段隆升历史;早期为“挤出”作用诱发的近等温减压退变质;晚期则是地壳伸展体制下的退变质     

大别山区深部地壳的变质岩石学证迹：罗田惠兰山一带的麻粒岩研究

大别杂岩中新太古代或古元古代麻粒岩相岩石分布具一定的区域规模。罗田黄土岭、惠兰山一带出露中性和基性麻粒岩，其矿物组合分别为；１．Ｇｒｔ＋Ｏｐｘ１＋Ｂｉ＋Ｋｆｓ＋Ｐｌ（Ａｎ２０）（中性），２．Ｇｒｔ＋Ｈｂ１＋Ｏｐｘ＋Ｃｐｘ＋Ｐｌ（Ａｎ４Ｏ）＋Ｉｌｍ（基性），它们的高峰变质条件分别为ＰＯ．８９～１．０４Ｇｐａ、Ｔ７５０～８５０℃（中性）以及Ｐ０．９～１．２９ＧＰａ、Ｔ６８２～８８０℃，平均７７１±５３℃（基性），说明其形成深度在３０ｋｍ以上。在中性麻粒岩中发现堇青石＋石英和堇青石＋黑云母的后成合晶，分别位于Ｇｒｔ与Ｏｐｘ１之间或穿插于Ｇｒｔ晶内，退变质反应条件为Ｐ为０．４１～０．５５ＧＰａ，Ｔ＝７１０℃，属减压退变质性质；后成合晶的形态与区域面理无关，说明减压退变质反映了碰撞造山带后期的近绝热隆升。区域花岗岩或地幔热流可能是绝热隆升的热源，现今出露的深源麻粒岩有过长期居留下地壳的历史，它们的抬升剥露是后期构造事件所致。     

大别地区的变质作用及与碰撞造山过程的关系

大别造山带从南到北可分为５个变质构造单元：扬子北缘蓝片岩带、突松变质杂岩带、南大虽碰撞杂岩带、北大别变质杂岩带和北淮阳变质带。各个变质构造单元中不同岩石的变质作用可划分为３种类型：（１）超高压型。以含柯石英（及金刚石）的榴辉岩为代表,仅见于南大别碰撞杂岩带中,这类岩石的ＰＴ轨迹反映洋壳Ｂ型俯冲的特点。（２）高压型。见于大别山南部的蓝片岩带、宿松变质杂岩带和南大别杂岩中的变质沉积岩及部分片麻岩中,与     

中国中央造山带内两个超高压变质带关系

中国中央造山带内至少发育两个超高压变质带,一个是南阿尔金-柴北缘-北秦岭超高压变质带,超高压峰期变质年龄为早古生代(500～400 Ma),代表扬子与中朝克拉通间的深俯冲和碰撞带;另一个是研究程度较高的大别-苏鲁超高压和高压变质带,峰期变质年龄主体是三叠纪(250～220 Ma),代表扬子克拉通内部的陆内大陆深俯冲和碰撞带。对东秦岭看丰沟及香坊沟的变质岩片详细岩石学和构造学研究以及先期造山带尺度的构造、岩石和年代学研究资料分析证明,南阿尔金-柴北缘-北秦岭超高压变质带,向东不能与大别-苏鲁超高压和高压变质带的任一部分相连,包括南大别和西北大别超高压及高压变质岩石。相反,大别-苏鲁超高压及高压变质带,向西经桐柏山,横过南襄盆地延伸到南秦岭的西峡及商南一带。仅在东秦岭-大别山范围内,两个超高压变质带分别位于南丹断裂系南北两侧,沿造山带近平行延展,之间被一系列以断裂或剪切带为边界的岩石构造岩片相隔,不能构成横贯中国中部统一的巨型超高压变质带。任何有关中国中央造山带构造格架及构造演化模型的建立,均应考虑其内部发育两个时代和功能不同的超高压变质带。     

大陆造山带中的隆－滑构造──一种前造山期伸展构造形式

大陆造山带中局部隆起－分层滑脱构造系（简称隆－滑构造）是对造山带的深入研究后提出的一种新的构造形式。它是在前造山期伸展构造作用体制下形成的，其结构由内核、外壳及接合面三部分组成。由于它与后造山期形成的变质核杂岩构造有着形貌相似的特点，因而很容易误将其归属为变质核杂岩构造。由于隆－滑构造有其特定的形成时间和独特的组合样式及构造特征，在造山带构造变形演化序列中应占有重要的地位，因而，这类构造的识别和确立对造山带研究有重要意义。由于隆－滑构造形成后又受到造山期收缩作用的挤压改造，它的原始形象已不甚明确，但一般常可以在复背斜构造中首先发现前造山期隆－滑构造的存在。由于隆－滑构造的特殊性，它对于造山带的构造学、地层学、变质作用以及成矿作用等的研究都很有意义。     

喜马拉雅造山带的变质作用与部分熔融

喜马拉雅造山带的核心由高级变质岩系和淡色花岗岩构成,是研究碰撞造山作用和板块构造的天然实验室。本文评述了喜马拉雅造山带变质作用和部分熔融研究取得的新进展和存在的争议,主要内容包括:(1)造山带核部具有"三明治"结构,高级变质和部分熔融的高喜马拉雅系列(GHS)夹持在较低级变质的特提斯喜马拉雅系列(THS)和低喜马拉雅系列(LHS)之中,GHS的变质作用程度具有向上和向下部构造层位降低的特征。高喜马拉雅系列主要由高压麻粒岩相到榴辉岩相的变质岩组成,具有1.2~1.6GPa和700~800℃峰期变质条件,顺时针型变质作用P-T轨迹,其进变质以增温增压为特征,退变质早期为近等温或增温降压过程,晚期为降温降压和近等压降温过程;(2)在造山带西段,紧邻缝合带产出的超高压变质岩具有4.4~4.8GPa和560~760℃的峰期变质条件和顺时针型P-T轨迹,并在退变质中期出现加热过程;(3)尽管造山带的高压和超高压变质岩形成在中、高温条件下,但岩石中的石榴石都保存有明显的主量和微量元素生长成分环带特征;(4)造山带变质核下部发育反转的中、高压型变质序列;(5)在造山带核部,变泥质和长英质麻粒岩的强烈部分熔融主要是增压、增温进变质过程中的白云母和黑云母脱水熔融,和近等温或增温降压过程中的黑云母脱水熔融,可以形成花岗质和英云闪长质熔体。加厚下地壳的高变质温度足以使各种成分岩石(包括基性岩)发生深熔,而不需要外来热源;(6)造山带变质核经历了长期的变质演化过程,其进变质始于~47Ma,峰期变质发生在~25Ma,退变质持续到~15Ma。这些岩石也记录了持续的(超过20Myr)高温变质和部分熔融过程。在造山带西段的超高压变质岩具有~46Ma的峰期变质年龄和~40Ma的退变质年龄,所以经历了一个快速俯冲与折返过程;(7)印度大陆西缘与岛弧的碰撞(造山带西段)和印度大陆东缘与大陆弧的碰撞时间一致,为~50Ma;(8)在造山带西段,印度大陆的深和陡俯冲形成了超高压变质岩;而在造山带中段,印度大陆的平缓俯冲形成了中高压变质岩;(9)构造变质不连续在变质核中广泛存在。多重有序逆冲和无序逆冲导致的岩片叠置控制着造山带的地壳结构;(10)现有的构造模型,包括楔形挤出、隧道流、临界楔和构造楔模型,都不能全面合理地解释造山带变质核部的折返机制。     

大磊山变质核杂岩基本特征及成在探讨

变质核杂岩是伸展构造的主要类型之一。本文从宏，微观结构研究入手，将大别造山带的大磊山变质核杂岩自下而上划分深变质核体，韧性剪切带，脆－韧性剪切带和流变滑脱盖层４个基本构造部分，并分别论述了各构造部分的变形，变质特征。结合区域构造背景，认为该变质核杂岩是大别造山带在晋宁期造山过程中，南北，淮阳地区早期裂解，晚期碰撞拼合形成的古变质核杂岩构造。     

大洋板块拖曳窄条陆壳俯冲——大规模超高压变质形成的构造条件

超高压变质岩生成问题中解决低密度大陆地壳深俯冲力学机制是一个关键问题。虽然俯冲地幔岩石可以裹携十几千米乃至几十千米尺度的陆壳块体到超高压变质深度，大规模的陆壳深俯冲需要特殊的构造条件。新西兰南岛北端研究表明，俯冲大洋板块能携带宽度达150km左右的窄条陆壳克服浮力达到超高压变质深度，而大陆板块碰撞的主体则浮在岩石圈上形成走滑断层。苏鲁-大别可能曾存在类似的构造条件：苏鲁西侧俯冲海洋板片首先拖曳苏鲁陆壳俯冲到超高压变质深度；随后大别以西俯冲大洋板片拖曳大别至超高压变质深度，而陆壳浮力导致苏鲁陆壳停止俯冲，飘浮的陆壳被北推而形成郯庐断裂；秦岭陆陆碰撞造山后大别超高压陆壳也折返；秦岭作为典型造山带，虽然不排除零星超高压变质的可能，但不具备大规模超高压变质的条件。     

Retrogressive Microstructures:A Key to Post Collisional Uplift and Extension Tectonics of Ultrahigh-Pressure Metamorphic Rocks from Dabie Orogenic Belt,China

ThereisanunanimousunderstandingthattheUHPmetamorphisminDabie-SuluareaswasformedduringtheTri-assiccollisioneventbetweentheYangtzeandNorthChinacratons(Congetal.,l994$Zhouetal-,l996;Liouetal.,l994)-Eclogiteisthemostimportantrocktypeamongtheul-trahigh-pressure(UHP)metamorphicrocks.Accordingtotheiroccurrencethereare3typesofeclogites:typeIisen-clavesinultramaficintrusionsandasmembersinthelayeredmafic-ultramaficcomplex(Jahnl998);typeIispodsorlay-ersinthehighlymetamorphicsupracrustals(mainlying…     

On Continent-Continent Point-Collision and Ultrahigh-Pressure Metamorphism

Up to now it is known that almost all ultrahigh-pressure (UHP) metamorphism of non-impact origin occurred in continent-continent collisional orogenic belt, as has been evidenced by many outcrops in the eastern hemisphere. UHP metamorphic rocks are represented by coesite- and diamond-bearing eclogites and eclogite facies metamorphic rocks formed at 650-800℃ and 2.6-3.5 GPa, and most of the protoliths of UHP rocks are volcanic-sedimentary sequences of continental crust. From these it may be deduced that deep subduction of continental crust may have occurred. However, UHP rocks are exposed on the surface or occur near the surface now, which implies that they have been exhumed from great depths. The mechanism of deep subduction of continental crust and subsequent exhumation has been a hot topic of the research on continental dynamics, but there are divergent views. The focus of the dispute is how deep continental crust is subducted so that UHP rocks can be formed and what mechanism causes it to be subducte     

Two Discrete UHP and HP Metamorphic Belts in the Central Orogenic Belt, China

INTRODUCTION Anew ultrahigh pressure ( UHP) metamorphicbelt ,the South Altun-North Qaidam-North QinlingUHP metamorphic belt ,has been recently discoveredand widely discussed by different workers (Yang J Set al .,2003 ,2002 ,2001 ,2000 ,1998 ;Zhang J Xetal .,2002 ,1999 ; Zhang G et al .,2001 ; Hu et al .,1996 ,1995 ,1994) . Detailed studies have also beencarried out onthe Dabie-Sulu UHP/ HP metamorphicbelt inthe central orogenic belt (COB) of China (Gaoet al .,2002 ;Sun et al …     

超高压变质岩的全球分布与地球演化节律

高压、超高压变质作用不是一个局部的孤立的地质现象，而是一个时空跨度大、范围广、影响构造观的重要科学问题。文中讨论了世界上三类（１３个）典型超高压变质地区的地质学岩石学特点，从全球构造的角度研讨了超高压变质的时空分布，从而得到下列认识：（１）所有高压、超高压变质岩均分布于全球活动带及其次级褶皱带内，超高压变质岩常常保存于多期变质和变形的基底片麻岩块体中，与深位壳型剪切带关系密切。（２）现有的年代学资料说明大部分超高压变质带出现于显生宙不同时代的褶皱带（造山带）内。（３）超高压变质演化的多阶段性，说明了地球从收缩到膨胀的节律现象。（４）从欧亚大陆范围看来，从北而南，从陆到洋超高压变质有逐渐变新的趋势，可能说明欧亚大陆从中生代以来，有从大陆向大洋方向增生的总趋势。     

Pb Isotope Mapping in the Tongbai-Dabie Orogenic Belt, Central China

Tongbai-Dabie orogenic belt in Central China is a part of the collisional belt between the Yangtze and North China cratons. It represents one of the most extensive ultrahigh-pressure （UHP） and high-pressure （HP） metamorphic rocks in the world. The Pb isotope mapping in this area is a significant method to constrain the crustal structure and tectonic evolution and to identify the tectonic boundaries within the vertical tectonic stack. Based on the Pb isotope compositions of the Dabie complex （DBC）, the Tongbai complex （TBC）, UHP and HP metamorphic rocks and associated foliated granites, the lower metamorphosed rocks from North Huaiyang （NHY） tectonic belt, and Cretaceous granites in the Tongbai-Dabie orogenic belt, we determined the Pb isotope geochemical map of the Tongbai-Dabie orogenic belt. The Pb isotope map shows that the Pb isotope compositions are similar within each geological body or lithotectonic unit, but the Pb isotope compositions of different lithotectonic units show systematic variations in the Tongbai-Dabie orogenic belt. The NHY tectonic belt contrasts strongly with the Tongbai-Dabie UHP.HP metamorphic belt in Pb isotope compositions. It is suggested that the line along the Xiaotian-Mozitan fault, the north limit of the Tongbai-Dabie UHP and HP metamorphic rocks, represents an important tectonic boundary. Within the Tongbai-Dabie HP -UHP metamorphic belt, to the south of Xiaotian-Mozitan fault, the vertical variations of Pb isotope compositions in different lithotectonic units and the spatial relationship among different major lithotectonic units have been constrained.     

The Dabie UHP unit, Central China: a Cretaceous extensional allochthon superposed on a Triassic orogen

Petrological, geochronological and structural data show that the eastern Dabie metamorphic complex resulted from two orogenic stages. Precursor rocks of the ultrahigh-pressure (UHP) and high-pressure (HP) units in the present hanging wall tectonic position were buried, penetratively deformed and subsequently exhumed by distributed, ESE-directed shearing during Triassic time. In contrast, rocks of the Dabie orthogneiss domes, now in a footwall tectonic position, were penetratively deformed during temperature-dominated, Early Cretaceous tectonic events, that are likely related to magmatic underplating. The Dabie orthogneiss domes and the UHP/HP units were juxtaposed during Early Cretaceous exhumation of Dabie orthogneiss domes by the formation of an ESE-directed low-angle ductile normal shear zone. Consequently, the UHP/HP units now represent an extensional allochthon in the hanging wall of the younger normal shear zone. The Cretaceous extensional structures are limited by boundary strike-slip faults. Consistent with the South China regional tectonic framework, ESE-directed lateral extrusion is considered to be the driving mechanism for extension and the present-day structure of the Dabie metamorphic complex.     

Triassic Collisional Structures and Post—Collisional Deformation of Bixiling UHP Rock Stack： Insights for Tectonic Evolution of UHP Metamorphic Belt in Dabie Massif, Central China

Detailed three-dimensional structural studies indicate that the Bixiling area,Dabie massif,central Chian shows the deepest exposed levels of the orogenic wedge formed during the Triassic Yangtze0Sino-Korean continental collision.New1:10000 scale structural mapping,combined with detailed petrological analysis in this area,has enabled us to accurately distinguish structures related to the Trias-sic continental collision from those related to post-collisional deformation in the ultrahigh pressure (UHP) metamorphic unit.The collisional or compressional structures include the massive eclogite with a weak foliation,foliated eclogite or UHP ductile shear zones,as well as upper amphibolite facies shear zones,whereas the post-collisional deformation is characterized by a regionally,flat-lying foliation con-taining stretching lineations and common reclined folds .The former is present exclusively in the eclogite lenses and their margins,representing orogenic thickening or syn-collisional events,while the latter was best occurred on variable scales under amphibolite facies conditions,showing sub-vertical,extreme short-ening and ductile thinning of the metamorphic rock stack.The eclogite facies tectonites that have a marked fabric discordance to the penetrative amphibolite facies extension flow fabric are common.It is emphasized that an extensional tectonic setting following the collision-orogenic thickening stage was,at least partly,responsible for exhumation of the UHP metamorphic rocks in the Dabie massif.A new tec-tionic evolution model is proposed for the UHP metamorphic belt on the scale of the Dabie massif.The Bixiling area thus provides a window,from which the dynamic processes concerning the formation and exhumation of the UHP rocks can be observed.Regional studies in the Dabie Mountains have confirmed this interpretation.