陕西八卦庙金矿床NE向黄铁矿-石英成矿期成矿物质来源和成矿机制探讨:原位硫同位素证据

八卦庙金矿床位于秦岭造山带凤太铅锌多金属矿田北部,是陕西省规模较大的金矿床之一,已探明金储量约106 t.赋矿围岩是上泥盆统星红铺组浅变质泥质碎屑岩和碳酸盐岩,其成矿过程可划分为3期,分别是①顺层磁黄铁矿-石英成矿期;②NE向黄铁矿-石英成矿期;③裂隙硫化物-方解石成矿期.目前关于NE向黄铁矿-石英成矿期成矿物质来源和成矿机制仍存在争议.本文通过矿相学观察,将NE向黄铁矿-石英成矿期划分为自形磁黄铁矿-黄铁矿-粗粒石英阶段(Ⅰ)、他形黄铁矿-银金矿-细粒石英阶段(Ⅱ)、他形磁黄铁矿-自然金-方解石阶段(Ⅲ)和黑云母阶段(IV),并在此基础上采用激光剥蚀-多接收等离子体质谱(LA-MC-ICP-MS)分析方法对千枚岩围岩中以及不同阶段形成的硫化物进行了原位S同位素测试,结果显示围岩中原生磁黄铁矿的δ34 S值集中于11.6‰～13.0‰之间,介于前人报道的原生黄铁矿δ34 S值变化范围(3.3‰～16.0‰);阶段I形成的黄铁矿的δ34 S值为8.4‰～10.1‰,磁黄铁矿为7.6‰～8.0‰;阶段II黄铁矿的δ34 S值相对较高,为14.0‰～15.9‰;阶段Ⅲ磁黄铁矿的δ34 S值介于6.4‰～8.3‰之间.八卦庙金矿NE向黄铁矿-石英成矿期总体相对富集重硫同位素、离散程度较大,各阶段硫化物的硫同位素值介于矿集区花岗岩和围岩硫之间,显示其具有岩浆硫与地层硫混合的特征.结合阶段I到阶段Ⅲ矿物组合的变化(黄铁矿+磁黄铁矿→黄铁矿→磁黄铁矿),推断阶段IIδ34 S值增高是水岩反应引起的硫化作用所致,而阶段Ⅲ硫同位素值降低可能与岩浆水的加入密切相关.结合成矿物理化学条件,推断该成矿期成矿热液中金主要以Au(HS)2-的形式迁移,阶段I到阶段Ⅱ由水岩反应引起的硫化作用是导致他形黄铁矿-银金矿-细粒石英阶段(Ⅱ)金矿化的主要原因,而岩浆水的混入可能是导致他形磁黄铁矿-自然金-方解石阶段(Ⅲ)金沉淀的主要机理.     

甘肃花牛山铅锌银矿床成因：来自原位S、Pb同位素及微量元素的约束

甘肃花牛山铅锌银矿床位于中亚造山带中段的甘肃北山地区。本文在详细的野外观察和室内鉴定的基础上,将花牛山铅锌银矿床成矿阶段划分为石英-毒砂-黄铁矿(第Ⅰ成矿阶段)和石英-多金属硫化物(第Ⅱ成矿阶段)两个阶段;进一步将黄铁矿划分为三种类型,分别为第一种类型的胶状黄铁矿(Py0)、第二种类型的热液叠加交代特征的黄铁矿(Py Ⅰ)及第三种类型的热液黄铁矿(PyⅡ)。黄铁矿、磁黄铁矿的原位硫同位素研究表明,成矿从早到晚硫化物δ~(34)S值呈递增的规律,具有逐渐向岩浆硫演化的趋势;胶状黄铁矿δ~(34)S值为-9.37‰～-8.10‰,具有沉积(生物成因)硫的特征;成矿第Ⅰ阶段硫化物δ~(34)S值为-9.03‰～-7.03‰,成矿第Ⅱ阶段硫化物δ~(34)S值为-5.77‰～-4.88‰,成矿阶段具有沉积硫与岩浆硫混合来源的特征。黄铁矿、磁黄铁矿的原位铅同位素研究表明,成矿期硫化物的~(206)Pb/~(204) Pb值、~(207)Pb/~(204) Pb值、~(208) Pb/~(204) Pb值以及μ、ω等铅同位素特征值组成范围较窄,铅源为与岩浆作用有关的壳幔混合来源,且与壳幔混合来源的晚三叠世花岗岩中长石铅及其控制的矽卡岩型金矿硫化物铅同位素组成类似。黄铁矿原位微量元素研究表明,胶状黄铁矿(Py0) Co/Ni和S/Se 比值分别为0.004～0.34和3.43 × 10~4～34.84 × 10~4,Se含量为1.558 × 10~(-6)～15.82 × 10~(-6),表现为沉积成因黄铁矿的特征。具有热液叠加交代特征Py Ⅰ的Co/Ni和S/Se 比值分别为0.05～3.38、0.05 ×10~4～5.38 ×10~4,Se含量为10.09 × 10~(-6)～1070 × 10~(-6),数值分布范围广,总体上有别于沉积成因黄铁矿,类似于热液成因黄铁矿的特征。热液黄铁矿(Py Ⅱ)的Co/Ni和S/Se 比值分别为0.60-68.88、1.46 × 10~4～9.15 × 10~4,Se含量为5.938 × 10~(-6)-35.91 × 10~(-6),表现为热液成因的特征。综上研究,认为花牛山矿床经历了南华纪-震旦纪沉积胶状黄铁矿形成期和晚三叠世岩浆热液成矿期,胶状黄铁矿在成矿过程中提供了部分硫,成矿金属物质主要来自晚三叠世岩浆成矿热液,并认为矿床成因为岩浆热液型矿床。     

胶西北新城金矿床硫同位素地球化学

新城金矿床是胶西北金矿集区中典型的破碎带蚀变岩型金矿床,其热液成矿作用可划分为四个阶段:黄铁矿-石英-绢云母阶段(I)、石英-黄铁矿阶段(II)、石英-多金属硫化物阶段(III)和石英-方解石阶段(IV),其中金主要赋存于II和III阶段的黄铁矿内。该矿床赋矿围岩为郭家岭岩体,岩性为石英二长岩和二长花岗岩,主要为胶东群变质基底经部分熔融形成。胶东群变粒岩硫同位素较为均一(δ34S值介于6.9‰~9.4‰,均值为8.0‰);郭家岭岩体的δ34S值介于6.0‰~16.0‰,均值为8.6‰,反映了其硫同位素组成总体上继承了变粒岩的硫同位素特征;长英质脉岩的δ34S值变化范围为0.8‰~8.5‰(均值为6.7‰),其中4件样品的δ34S值变化范围为7.4‰~8.5‰,反映了其硫主要源自于郭家岭岩体,变粒岩可能提供了部分硫源;而其中1件样品的δ34S值仅为0.8‰,符合岩浆硫来源特征,表明深部岩浆可能也提供了部分硫源。新城金矿床矿石中硫化物δ34S值变化范围较大(4.3‰~10.6‰,均值为8.3‰),表明矿石硫可能源于郭家岭岩体、变粒岩和长英质脉岩,最终主要来源于胶东群变质基底。I阶段黄铁矿颗粒较小(5~600μm),晶形主要为立方体,反映其处于温度较高(300~350℃)、成矿流体的过饱和度较低、低氧逸度和硫逸度、冷却快速、物质供应不足的成矿环境;黄铁矿δ34S值变化范围为8.4‰~10.6‰,均值为9.7‰,反映了矿石硫可能源自于δ34S值较高的郭家岭岩体和变粒岩。II和III阶段黄铁矿粒径变化较大(3μm~2.5mm),晶形主要为五角十二面体,反映其处于中-低温度(200~300℃)、成矿流体过饱和度高、高氧逸度和硫逸度、缓慢冷却同时物质供应充分的成矿环境。其中,II阶段黄铁矿δ34S值变化范围为7.7‰~9.7‰,均值为8.7‰,表明矿石硫源除郭家岭岩体和变粒岩外,δ34S值较低的长英质脉岩可能也提供了部分硫源。III阶段硫化物δ34S值变化范围较大(4.3‰~9.4‰,均值为7.1‰),闪锌矿-方铅矿硫同位素热力学平衡温度范围为180~282℃,氧逸度约为10-37.3~10-36.8,反映了矿石硫源自于郭家岭岩体、变粒岩和长英质脉岩,硫化物δ34S值变化范围较大可能是硫同位素分馏达到平衡的结果。IV阶段黄铁矿粒径最小(1~5μm),为晶形完好、表面光滑的立方体晶形,表明其处于较低温度(200℃),成矿流体的过饱和度较低、氧逸度和硫逸度较低、物质供应不足的成矿环境。     

内蒙狼山成矿带东升庙多金属硫化物矿床硫的来源及矿化过程

东升庙多金属硫化物矿床是狼山成矿带最大和最典型的铅锌多金属硫化物矿床,目前该矿床硫的来源及成矿过程仍存在争议。本文对矿区常见硫化物矿石和最重要的赋矿围岩——绢云石墨片岩中的硫化物分别进行硫同位素分析。结果显示东升庙矿床的硫化物普遍富集硫的重同位素,且矿石与围岩中的硫化物的硫同位素分布范围均较为集中。绢云石墨片岩中的黄铁矿的δ~(34)S值在+19.4‰~+23.4‰之间,具有和当时海水硫酸盐相似的硫同位素组成,指示围岩中的不规则黄铁矿是孔隙水(海水)中的硫酸盐被完全还原后形成的。矿石硫化物的δ~(34)S值在+28.3‰~+31.3‰之间,相比围岩中的黄铁矿明显富集硫的重同位素,指示两者具有不同的硫源。矿石中的硫可能源自基底地层中蒸发岩的溶解,由此形成的硫酸盐占主导的热液流体可萃取大量铅、锌等金属,当遇到狼山群地层中富含有机质的沉积岩时发生热化学还原反应,从而造成硫化物的大量卸载,形成金属硫化物矿床。     

相山铀矿田黄铁矿微量元素、硫同位素特征及其地质意义

相山铀矿田位于江西省境内的相山火山盆地中,是中国目前最大的火山岩型铀矿田。文章利用电子探针(EPMA)和激光剥蚀多接收电感耦合等离子质谱仪(LA-MC-ICP-MS)技术对矿田内几个典型铀矿床(居隆庵、河元背和沙洲矿床)中矿前期热液蚀变阶段形成的黄铁矿分别进行了微量元素及S同位素组成特征研究。研究结果表明,矿田内铀矿床中黄铁矿的Co/Ni比值主要介于2.00～6.00,支持其为热液成因。黄铁矿的δ34S值总体变化于+0.1‰～+16.2‰,但西部与北部铀矿床之间黄铁矿δ34S值存在显著差异:西部铀矿床(居隆庵、河元背)中黄铁矿δ34S值为+0.1‰～+8.4‰,介于矿田内新元古代基底变质沉积岩δ34S值(+7.9‰～+9.4‰)与壳源岩浆δ34S值(-5.0‰～+5.0‰)之间,暗示S可能来自基底变质沉积岩硫与围岩(流纹英安岩和碎斑熔岩)中硫化物的硫的混合;北部沙洲铀矿床中黄铁矿的δ34S值为+7.5‰～+16.2‰,与蒸发硫酸盐δ34S值相接近,表明硫的来源可能主要与矿田西北侧红盆内硫酸盐的热化学还原(TSR)相关,围岩(花岗斑岩)中的Fe2+在还原过程中发挥了重要作用。同时,热化学还原产生的H2S与围岩中的Fe2+进一步结合形成黄铁矿。铀成矿期含铀热液中的六价U(Ⅵ)与铀成矿前期形成的上述黄铁矿发生氧化还原反应,导致铀沉淀成矿。     

新疆希勒库都克铜钼矿床硫同位素特征及成矿物质来源探讨

位于东准噶尔北缘的希勒库都克铜钼矿床是一个以钼为主的斑岩型矿床,形成于早石炭世。希勒库都克铜钼矿床硫化物δ34S值介于+0.4‰~+7.6‰之间,平均为+4.1‰,其中黄铁矿δ34S值为+0.4‰~+7.6‰(平均+4.2‰)、辉钼矿δ34S值为+3.2‰~+4.7‰(平均+4.2‰)、黄铜矿δ34S值为+1.6‰~+2.5‰(平均+2.1‰),均显示出岩浆硫的组成特征。硫化物稀土元素特征与含矿斑岩类似,暗示成矿物质可能来源于含矿斑岩;流体包裹体地球化学及H-O同位素特征也表明成矿流体主要来自岩浆热液。而含矿斑岩高的正εNd(t)值、低的87Sr/86Sr初始比值表明含矿岩浆可能主要来自于地幔源区。综合研究区硫化物硫同位素、稀土元素及流体包裹体地球化学特征等分析,本文认为希勒库都克铜钼矿床成矿物质主要来自地幔源区,且含矿岩浆可能经历了地壳深部壳幔物质混合均一化的过程。     

青海沱沱河地区多才玛铅锌矿床成因:原位S和Pb同位素证据

青海沱沱河地区多才玛铅锌矿床是西南三江特提斯北段新生代铅锌矿集区的典型矿床之一,本文首次应用飞秒激光剥蚀多接受器等离子体质谱法对多才玛铅锌矿床中金属硫化物的原位S和Pb同位素进行了测定。结果显示:黄铁矿、方铅矿和闪锌矿的原位S同位素的δ~(34)S_(V-CDT)值介于-26.34‰～4.24‰之间,均值-12.15‰(n=20),其中闪锌矿的δ~(34)S_(V-CDT)值介于-10.30‰～-3.52‰,均值-7.39‰(n=9);方铅矿的δ~(34)S_(V-CDT)值为-26.34‰～-11.74‰,均值-20.36‰(n=9);黄铁矿的δ~(34)S_(V-CDT)值分别为2.50‰,4.24‰。矿床δ~(34)S数据范围较宽,总体表现为富集负值硫的特征,说明有机质可能参与成矿。岩浆热液期发育的黄铁矿δ~(34)S值具有深源特征,沉积热液期发育的方铅矿和闪锌矿的δ~(34)S值表明成矿过程存在还原作用,指示盆地地层还原流体的混入,综上可认为多才玛铅锌矿床硫具有混合来源的特征。方铅矿原位Pb同位素结果为~(206)Pb/~(204)Pb=18.866～18.929,~(207)Pb/~(204)Pb=15.674～15.689,~(208)Pb/~(204)Pb=39.052～39.174。方铅矿与地层的Pb同位素组成一致,位于上地壳平均Pb演化线之上,具上地壳和地幔混合俯冲带铅的特征,表明其成矿物质的来源多样。结合矿床学、矿物学及同位素数据,本文认为多才玛铅锌矿床S元素主要来源于赋矿围岩,Pb金属元素主要来源于藏北钾质火山岩,侵入地层岩浆与盆地流体的混合是金属硫化物沉淀的重要机制。     

西天山智博铁矿床黄铁矿成分特征及硫同位素研究

智博大型磁铁矿床位于新疆西天山阿吾拉勒铁铜成矿带东段,主要矿石矿物为磁铁矿,主要共生金属矿物为黄铁矿。文章通过对黄铁矿进行矿物成因研究来推测矿床成因及特征。本次研究选择2个成矿期的矿石及围岩中的黄铁矿进行电子探针及硫同位素研究。电子探针数据显示岩浆期黄铁矿w(Co)平均为4703×10~(-6),大于热液期w(Co)(735.71×10~(-6)),Co/Ni比值(平均18.53)也大于热液期黄铁矿Co/Ni比值(平均0.96);S/Se比值多数集中于1000～8000之间。部分Co/Ni、Se/Te、S/Se比值落入热液成因范围内,暗示了热液流体参与成矿的可能性。而Co-Co/Ni图解显示岩浆期矿石和热液期矿石具有一定的继承性。黄铁矿中δ~(34)S值介于-1.2‰和0.3‰之间,表明硫主要来源于幔源硫。智博铁矿床矿石主要为岩浆成因,但岩浆期后热液及其他热液流体也参与了晚阶段的成矿作用。     

浙西北地区大桥坞铀矿床硫同位素特征研究

大桥坞矿床是赣杭构造-火山岩带中典型火山岩型铀矿床之一,文章旨在研究大桥坞矿床硫同位素特征及其物源示踪意义。研究表明,大桥坞矿床铀矿石δ34 SV-CDT值介于-2.18‰～-10.43‰,蚀变围岩中的δ34SV-CDT值介于6.67‰～8.63‰,两者硫同位素组成存在明显的差异。分析认为,造成铀矿石的δ34SV-CDT值一致为负,而蚀变围岩的δ34SV-CDT值一致为正的原因,可能是成矿流体本身产生的沸腾去气作用导致硫同位素分馏效应;大桥坞矿床成矿流体中的硫具有幔源属性。     

江西相山矿田硫铅同位素地球化学特征

为查明江西相山矿田内铅锌矿和铀矿床的成矿物质来源,对与铅锌矿、铀矿有关的矿石矿物进行了S、Pb同位素研究,结果显示,与铅锌矿有关的金属矿物δ34S值为1.3‰~4.7‰,同铀矿伴生的黄铁矿δ34S值为7.9‰~14.9‰;赋矿围岩、基底变质岩、铀矿床黄铁矿和铅锌矿硫化物的206Pb/204Pb、207Pb/204Pb及208Pb/204Pb比值整体上有逐渐降低的趋势,均表现出放射性成因铅的特征,不同岩石或矿石的样品铅同位素组成范围基本一致。结合前人研究,说明铅锌矿和铀矿并非来自同一次成矿事件;铅锌矿的成矿期次具有阶段性,硫源具有均一性,主要以深部硫源为主,在其向上迁移的过程中有少量基底变质岩中的硫加入,按照硫化物共生矿物对计算出铅锌矿的成矿温度:早阶段为424~382℃,晚阶段为331~290℃,属中高温热液矿床;铀矿的硫源具有地层硫特征,主要来自于基底变质沉积岩。铀矿床伴生的黄铁矿铅同位素组成比铅锌矿硫化矿的铅同位素组成更具放射性成因铅,铅锌矿的铅源主要与上地壳基底变质岩有关,铀矿的铅源主要以相山火山-侵入杂岩体为主,但是可能还具有少量幔源铅参与。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。