Adsorption and surface complexation modeling of palladium,rhodium and platinum in surficial semi-arid soils and sediment

Sorption isotherms, time-dependent adsorption and surface complexation modeling studies were used to investigate the post-depositional mobility of three of the platinum group-elements (Pd, Rh, and Pt) in semi-arid soil and sediment samples with varying surface properties. The acidity constants (Log K_a1 and Log K_a2), optimized from batch titration data, ranged from 4.69 to 5.34 for Log K_a1 and from −6.51 to −7.61 for Log K_a2, suggesting the occurrence of both protonation and deprotonation reactions on the solid surfaces. Partition coefficients and removal rates of the metals had a general trend of Pd > Pt > Rh. The sediment sample, with the highest clay content and exchangeable cation concentrations, also had the highest affinity for the metals. The times required for sediment to adsorb 63% of the metals were 2.63 h, 4.08 h and 10.64 h for Pd, Pt and Rh, respectively. The FITEQL program successfully optimized the conditional binding constants of the metals on the solids from batch adsorption data. The constants decreased in the order of Pd > Rh > Pt, which was consistent with the observed high affinity of the solids for Pd. The modeling results also showed that aqueous Pd was the least sensitive to pH followed by Rh and Pt. However, metal adsorption below the points of zero net proton charges (ca. pH 6.7) is attributable to the involvement of permanent negatively charged binding sites in the adsorption process. Notably, partition coefficients, removal rates and conditional binding constants all showed a high affinity of Pd for the solids. A similarity between the model outputs and the batch adsorption data indicates the suitability of the model for describing the mobility and retention of the three metals in semi-arid soils and sediments.     

Modeling on adsorption–desorption of trace metals to suspended particle matter in the Changjiang Estuary

The uptake and release of trace metals (Cu, Ni, Zn, Cd, and Co) in estuaries are studied using river and sea end-member waters and suspended particulate matter (SPM) collected from the Changjiang Estuary, China. The kinetics of adsorption and desorption were studied in terms of environmental factors (pH, SPM loading, and salinity) and metal concentrations. The uptake of the metals studied onto SPM occurred mostly within 10 h and reached an asymptotic value within 40 h in the Changjiang Estuary. As low pH river water flows into the high pH seawater and the water become more alkaline as it approaches to the seaside of estuary, metals adsorb more on SPM in higher pH water, thus, particulate phase transport of metal become increasingly important in the seaward side of the estuary. The percentage of adsorption recovery and the distribution coefficients for trace metals remained to be relatively invariable and a significant reduction only occurred in very high concentrations of metals (>0.1 mg L⁻¹). The general effect of salinity on metal behavior was to decrease the degree of adsorption of Cu, Zn, Cd, Co, and Ni onto SPM but to increase their adsorption equilibrium pH. The adsorption–desorption kinetics of trace metals were further investigated using Kurbatov adsorption model. The model appears to be most useful for the metals showing the conservative behavior during mixing of river and seawater in the estuary. Our work demonstrates that dissolved concentration of trace metals in estuary can be modeled based on the metal concentration in SPM, pH and salinity using a Kurbatov adsorption model assuming the natural SPM as a simple surfaced molecule.     

Competitive heavy metals adsorption on natural bed sediments of Jajrood River,Iran

The presence of heavy metal concentrations was examined in natural sediments from four sites along the Jajrood river in northeast of Tehran, the capital of Iran. Besides determination of elemental concentrations (Pb, Cu, Zn, Cd, Ni and Cr), X-ray fluorescence and X-ray diffraction tests were carried out to determine other chemical components in these adsorbents. Also the ability of sediments to adsorb these heavy metal ions from aqueous solutions was investigated. Results show that the extent of adsorption increases with increase in adsorbent concentration. The amount of adsorbed Pb, Cu and Zn in sediments was much greater than that of the other metals, and Cr was adsorbed much less than others. The adsorbabilities of sediments to heavy metals increased in the order of Pb > Cu > Zn > Cd > Ni > Cr. Based on the adsorption data, equilibrium isotherms were determined at selected areas to characterize the adsorption process. The adsorption data followed Freundlich and Langmuir isotherms in most cases. Correlation and cluster analysis was performed on heavy metals adsorption and sediment components at each site to evaluate main adsorbing compounds in sediments for each metal. Results demonstrated that heavy metals sorption is mostly related to load of organic matter in the Jajrood river sediments.     

Trace metals in oxic lake sediments: possible adsorption onto iron oxyhydroxides

Apparent overall equilibrium constants for the adsorption of Cd, Cu, Ni, Pb and Zn onto natural iron oxyhydroxides have been calculated from the partitioning of these trace metals in oxic lake sediments and the in situ measurement of trace metal concentrations in the associated pore waters. Such values obtained from lakes of various pH located on the Precambrian Shield, in the area of Sudbury, Ontario, are compared with equilibrium constants obtained for the adsorption of the trace metals onto iron oxyhydroxides in well-defined media.The field data are consistent with laboratory experiments reported in the literature and with theory. Both the influence of pH upon adsorption and the binding strength sequence observed for the field data agree with theory. At high sediment pH values, the partitioning of Cd, Ni and Zn between the pore waters and the natural iron oxyhydroxides is similar to those reported in the literature for the adsorption of these metals at low surface coverage onto amorphous iron oxyhydroxides in a NaNO₃ medium; deviation from this simple model is however observed for Cu and Pb, presumably due to the competitive action of dissolved ligands. At low sediment pH values, the adsorption is much higher than predicted by the simple model and can be explained by the formation of ternary complexes with the iron oxyhydroxide surface.     

Effect of multifactors interaction on competitive adsorption of Zn<Superscript>2+</Superscript> and Cd<Superscript>2+</Superscript> by response surface methodology

The problem associated with multi-metals contaminated soils has generated increasingly more attention. Thus, it is necessary within the field to study the mutual influence of environmental factors on competitive adsorption. The majority of studies carried out to date have concentrated on the variation of adsorption capacity or the removal efficiency, with only a single factor changed (including pH, ionic strength, and metal concentration). However, the interaction effect among various environmental factors was ignored in these studies. The purpose of this study was mainly aimed toward the investigation of the interaction of two influential factors, as well as the influential degree of each factor (such as the initial pH, ionic strength, initial metal concentration, and the competitive metal concentration) on competitive adsorption using the response surface method. These results demonstrated that the influential degree of each factor studied on the competitive adsorption of Zn²⁺ and Cd²⁺ followed the trend of having the initial concentration of the target metal?>?initial pH?>?concentration of competitive metal?>?ionic strength. When the metal concentration was held constant, we found that the competitive adsorption of Zn²⁺ initially increased, followed by a decrease with increasing initial pH. However, this was found to change minimally with increasing ionic strength. When the initial pH or ionic strength was held constant, the competitive ability was observed to increase with increasing Zn²⁺ concentration. However, with increasing Zn²⁺ or Cd²⁺ concentrations, the variation degree of the competitive adsorption was found to become smaller. These results provide novel information toward a better understanding of the effect of multifactors on the competitive adsorption of Zn²⁺ and Cd²⁺.     

Sorption of heavy metals from aqueous solution by dehydrated powders of aquatic plants

Ruppia maritima and Echinodorus amazonicus were prepared in a dehydrated powder form. The characteristics and mechanisms of adsorption of heavy metals were studied under various pH values, reaction times, and heavy metal ion concentrations. The results showed that under different pH and reaction time conditions, heavy metal adsorption was lead > cadmium > zinc > copper. The adsorption of lead increased linearly with the lead concentration. For cadmium, zinc and copper, the adsorption was saturated when metal ion concentration exceeded 200 mg/L. When a Freundlich model was applied, R ² values for the heavy metal adsorption by the aquatic plants mostly exceeded 0.9. The adsorption of heavy metal ions by these two aquatic plant powders was better explained by the Lagergren second-order equation than the first-order equation. From the Fourier Transform Infrared spectra, there was an adsorption peak at 2,115 cm^?1 for R. maritima. The peak shape did not change with metal affiliation except there was a shift of peak wavelength before adsorption. The results indicate that the mechanism of heavy metal adsorption by the two species is not simply on the mono-molecular layer level, and that intra-particulate dispersal is the dominant process. Heavy metal pollution does not affect the basic chemical components, and major substances involved in heavy metal adsorption including carbohydrates, cell wall pectin, and protein functional groups.     

Comparison of trace metal adsorption onto different solid materials and their chemical components in a natural aquatic environment

Solid materials such as suspended particulate matter (SPM), deposited sediment (DS) and natural surface coatings (NSC, composed of biofilms and associated minerals) are important sinks and potential sources of pollutants in natural aquatic environments. Although these materials can exist in the same water body, few studies have been conducted to compare their ability to adsorb trace metals. In this study, the adsorption of Pb, Cu and Cd by these solids, collected from an urban lake, was investigated. In addition, the metal adsorption properties of the main components of these solids, namely Mn and Fe oxides and organics, were also investigated using the method of selective extraction followed by metal adsorption. The solids that co-existed in water showed similarities and differences in their compositions. For each metal, adsorption to the solids occurred in the same order: NSC > SPM > DS. For Pb and Cd, Fe and Mn oxides and organics contributed to the adsorption by NSC and SPM, and the adsorption by DS was dominated by Fe oxides. For Cu, the organics were the main adsorptive phase. The specific adsorption capability of these components decreases in the following order: Mn oxides > Fe oxides > organics. Overall, the results presented herein indicate that different solids and their components played important roles in the adsorption of trace metals.     

A surface complexation and ion exchange model of Pb and Cd competitive sorption on natural soils

The bioavailability and fate of heavy metals in the environment are often controlled by sorption reactions on the reactive surfaces of soil minerals. We have developed a non-electrostatic equilibrium model (NEM) with both surface complexation and ion exchange reactions to describe the sorption of Pb and Cd in single- and binary-metal systems over a range of pH and metal concentration. Mineralogical and exchange properties of three different acidic soils were used to constrain surface reactions in the model and to estimate surface densities for sorption sites, rather than treating them as adjustable parameters. Soil heterogeneity was modeled with >FeOH and >SOH functional groups, representing Fe- and Al-oxyhydroxide minerals and phyllosilicate clay mineral edge sites, and two ion exchange sites (X⁻ and Y⁻), representing clay mineral exchange. An optimization process was carried out using the entire experimental sorption data set to determine the binding constants for Pb and Cd surface complexation and ion exchange reactions.Modeling results showed that the adsorption of Pb and Cd was distributed between ion exchange sites at low pH values and specific adsorption sites at higher pH values, mainly associated with >FeOH sites. Modeling results confirmed the greater tendency of Cd to be retained on exchange sites compared to Pb, which had a higher affinity than Cd for specific adsorption on >FeOH sites. Lead retention on >FeOH occurred at lower pH than for Cd, suggesting that Pb sorbs to surface hydroxyl groups at pH values at which Cd interacts only with exchange sites. The results from the binary system (both Pb and Cd present) showed that Cd retained in >FeOH sites decreased significantly in the presence of Pb, while the occupancy of Pb in these sites did not change in the presence of Cd. As a consequence of this competition, Cd was shifted to ion exchange sites, where it competes with Pb and possibly Ca (from the background electrolyte). Sorption on >SOH functional groups increased with increasing pH but was small compared to >FeOH sites, with little difference between single- and binary-metal systems. Model reactions and conditional sorption constants for Pb and Cd sorption were tested on a fourth soil that was not used for model optimization. The same reactions and constants were used successfully without adjustment by estimating surface site concentrations from soil mineralogy. The model formulation developed in this study is applicable to acidic mineral soils with low organic matter content. Extension of the model to soils of different composition may require selection of surface reactions that account for differences in clay and oxide mineral composition and organic matter content.     

Competitive adsorption of Cd,Cu, Pb and Zn by different soils of Eastern China

Simultaneous competitive adsorption behavior of Cd, Cu, Pb and Zn onto nine soils with a wide physical–chemical characteristics from Eastern China was measured in batch experiments to assess the mobility and retention of these metals in soils. In the competitive adsorption system, adsorption isotherms for these metals on the soils exhibited significant differences in shape and in the amount adsorbed. As the applied concentration increased, Cu and Pb adsorption increased, while Cd and Zn adsorption decreased. Competition among heavy metals is very strong in acid soils with lower capacity to adsorb metal cations. Distribution coefficients (K _dmedium) for each metal and soil were calculated. The highest K _dmedium value was found for Pb and followed by Cu. However, low K _dmedium values were shown for Zn and Cd. On the basis of the K _dmedium values, the selectivity sequence of the metal adsorption is Pb > Cu > Zn > Cd and Pb > Cu > Cd > Zn. The adsorption sequence of nine soils was deduced from the joint distribution coefficients (K _dΣmedium). This indicated that acid soils with low pH value had lower adsorption capacity for heavy metals, resulting in much higher risk of heavy metal pollution. The sum of adsorbed heavy metals on the soils could well described using the Langmuir equation. The maximum adsorption capacity (Q _m) of soils ranged from 32.57 to 90.09 mmol kg⁻¹. Highly significant positive correlations were found between the K _dΣmedium and Q _m of the metals and pH value and cation exchange capacity (CEC) of soil, suggesting that soil pH and CEC were key factors controlling the solubility and mobility of the metals in soils.     

Anthropogenic influences on toxic metals in water and sediment samples collected from industrially polluted Cuddalore coast,Southeast coast of India

The present study was carried out to investigate the impact of anthropogenic influences on Cuddalore coast, Southeast coast of India, with regard to physicochemical parameters and heavy metal concentration in the surface water and sediment samples of the study area. The samples were collected in different seasons of the year (January–December 2010) and analysed for physicochemical parameters (Temperature, pH, salinity, nitrate, nitrite, ammonia, phosphate and silicate) and heavy metals (Cd, Cu, Pb and Zn) using standard methods. Results showed that physicochemical characteristics and heavy metals concentration in the samples of the study area were varied seasonally and spatially. The concentrations of heavy metals in water and sediment samples of the study area were higher in the monsoon season compared with those of other seasons. The heavy metal concentration in collected samples was found to be above WHO standards. The order of heavy metals in water and sediment samples was Pb > Cu > Cd > Zn. The heavy metal data were analysed through widely using multivariate statistical methods including principle component analysis (PCA) and cluster analysis (CA). CA classified the sampling sites into three clusters based on contamination sources and season. The PCA revealed that the season has a huge impact on the levels, types and distribution of metals found in water and sediment samples. The study also shows the main basis of heavy metals pollution at Cuddalore coast is land based anthropogenic inputs as a result of discharging of waste from industries, municipal, agricultural activities and sewage into estuarine regions, which carries the wastes into coastal area during tidal action. Statistical analyses and experimental data revealed that the Cuddalore coast may cause health risk to the recreational users and fisher folk, ultimately warrants environmental quality management to control heavy metal contamination.     

Utilization of ochre as an adsorbent to remove Pb(II) and Cu(II) from contaminated aqueous media

The ability of ochre to remove Pb(II) and Cu(II) from aqueous media has been studied by batch sorption studies varying the contact time, initial metal concentration, initial solution pH and temperature to understand the adsorption behaviour of these metals through adsorption kinetics and isotherms. The pH of the solution and the temperature controlled the adsorption of metal ions by ochre and rapid uptake occurred in the first 30 min of reaction. The kinetics of adsorption followed a pseudo-second-order rate equation (R ² > 0.99) and the isotherms are well described by the Freundlich model. Adsorption of metals onto ochre is endothermic in nature. Between the two metals, Pb(II) showed more preference towards the exchangeable sites on ochre than Cu(II). This study indicates that ochre is a very effective adsorbent in removing Pb(II) and Cu(II) from the aqueous environment with an adsorptive capacity of 0.996 and 0.628 mg g^?1 and removal efficiency of 99.68 and 62.80 %, respectively.     

Role of riverine sediment and particulate matter in adsorption of heavy metals

Riverine sediments and suspended matters have been subjected to several bench scale tests for the evaluation of adsorption potential of heavy metals. For this purpose water, sediment and suspended particulate matters of Tadjan River (southern part of the Caspian Sea) were collected. In the vicinity of the river many polluting sources were recognized; for instance, pulp and paper mill, dairy factory and municipal sewage that can introduce various amounts of heavy metals into the river water. Bottom sediments and suspended particulate matters have been individually subjected to adsorption tests. The results of analysis showed that riverine bottom sediments have greater potential for adsorbing heavy metals than suspended matters. However the trend of adsorption in both sediments and suspended matters are similar. Maximum adsorption capacity of heavy metals (in terms of mg of metal per kg of sediments and suspended matters) by sediments and suspended matters are as: Sediments: Cu (2200)> Mn (2000)> Ni (1400)> Zn (320) Suspended matters: Cu (2100)> Ni (1500)> Mn (1200)> Zn (310) Further, results revealed that increasing concentration of metals would cause desorbing Cadmium from both sediments and suspended matters.     

Similar Adsorption Parameters for Trace Metals with Different Aquatic Particles

Conditional surface binding constants and complexation capacities for Zn, Pb, Cd, and Cu were determined from surface titration experiments of heterogeneous natural aquatic particulate matter of different origin and composition. Metals and particles were evaluated in naturally occurring concentration ranges in river water.The adsorption of trace metals can be adequately described with a single conditional binding constant over a wide range of metal : particle ratios. Binding constants for aquatic particles at pH 8.0 are remarkably independent from particle composition and are specific for each metal: log K^ads _Zn = 8.39, log K^ads _Pb = 9.67, log K^ads _Cd = 8.61, log ^ads _Cu = 9.84. From competition experiments with Ca and Pb we extracted a sorption coefficient for Ca of log K^ads _Ca = 2.5 (pH 8.0). Maximum surface binding capacities for all metal ions were found for particles containing high fractions of Mn-oxides which are associated with large specific surface areas. Generally, we found sorption capacities to decrease in the sequence Cu Pb, Zn > Cd.The experiments suggest that the conditional surface binding constants and complexation capacities are applicable to model trace metal adsorption in the concentration ranges of natural waters under conditions similar to the experiments. Results also imply that the chemical nature of particle surface sites is rather uniform in the intermediate concentration range or that the array of binding sites averages out differences in sorption strength over the prevailing concentration range of metal ions, respectively.     

Modeling the adsorption of Cd (II), Cu (II), Ni (II), Pb (II) and Zn (II) onto montmorillonite

The adsorption of five toxic metallic cations, Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II), onto montmorillonite was investigated as a function of pH and ionic strength and a two-site surface complexation model was used to predict the adsorption data. The results showed that in the lower pH range, 3∼6 for Cd, Cu, Ni and Zn, and 3∼4.5 for Pb, the adsorption was greatly affected by ionic strength, while in the higher pH range, the adsorption was not. In the lower pH range, the metallic cations were mainly bound through the formation of outer-sphere surface on the permanently charged basal surface sites (≡X⁻), while in the higher pH range the adsorption occurred mainly on the variably charged edge sites (≡SOH) through the formation of inner-sphere surface complexes. Acid-base surface constants and metal binding constants for the two sites were optimized using FITEQL. The adsorption affinity of the five metallic cations to the permanently charged sites of montmorillonite was Pb > Cu > Ni ≈ Zn ≈ Cd, while that to the variable charged sites was Pb ? Cu > Zn > Cd > Ni.     

Trace metal in beach sediments of Velanganni Coast,South India: application of autoclave leach method

The concentration of trace metals like Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn were studied in beach and estuarine sediments of the Velanganni Coast, South East coast of India to understand metal pollution due to urbanization/industrialization. This area was affected by the urbanization activity like untreated effluent discharge, transportation and incineration of solid waste, etc. In this context, quality of the sediments was evaluated based on the enrichment factor, geo-accumulation index (Igeo), pollution load index, and sediment quality guidelines. Furthermore, correlation matrix and principal compound analyses have been performed with SPSS 7.5 statistical software. The result illustrated that the metal enrichment is in the following order: Cd > Cr > Ni > Zn > Pb > Mn > Cu. The level of Igeo suggests that Cd has moderately polluted the sediment class. Similarly, principal component analysis showed that Cd and Pb accounted for the anthropogenic pollution, but Pb inferred as its tracers level. The results strongly indicate anthropogenic sources for moderate input of Cd contamination in to Velanganni coastal sediments.     

Laboratory measurements and modeling of metal-humic interactions under estuarine conditions

Equilibrium dialysis was used to measure Co- and Cu-binding by an isolated peat humic acid (PHA) in controlled laboratory experiments under simulated estuarine conditions: ionic strengths of 0.005 to 0.7 M in NaCl and mixed Na-Mg-Ca chloride solutions, with trace metal concentrations of ∼5 × 10⁻⁷ M, a PHA concentration of 10 mg/L, and at constant pH values of ∼7.8 (Co and Cu) and ∼4.6 (Cu only). Generally, Co- and Cu-humic binding decreased substantially with increasing ionic strength and, in the case of Cu, with decreasing pH. The presence of seawater concentrations of Ca and Mg had a relatively small effect on Co-humic binding and no measurable effect on that of Cu under the experimental conditions. The binding data were well-described by an equilibrium speciation code (the Windermere Humic Aqueous Model, WHAM) after optimising the fits by varying the metal-proton exchange constants for humic acid within justifiable limits (i.e., within 1 standard deviation of the mean exchange constants used in the WHAM database). The main factor producing the observed variations in metal-humic binding at constant pH was the electrostatic effect on the humic molecule. WHAM was used to predict Co- and Cu-humic binding in simulations of real estuaries. Co-humic binding is predicted to be relatively unimportant (generally <5% of total Co), whereas the Cu-humic complex is likely to be the dominant species throughout an estuary. The main factors producing changes in Co- and Cu-humic binding in the real-estuary simulations are the electrostatic effect on the humic molecule, ligand competition (mainly from carbonate species) for metals, and to a lesser extent Ca and Mg competition for humic binding sites. Variations in pH are significant only at the freshwater end of an estuary. WHAM simulations also indicated that competition effects between metals are more likely to occur in freshwaters than in seawater, due to enhanced electrostatic binding at low ionic strength.     

Heavy metals removal from synthetic wastewater by a novel nano-size composite adsorbent

The effects of varying operating conditions on metals removal from aqueous solution using a novel nano-size composite adsorbent are reported in this paper. Characterization of the composite adsorbent material showed successful production of carbon nanotubes on granular activated carbon using 1 % nickel as catalyst. In the laboratory adsorption experiment, initial mixed metals concentration of 2.0 mg/L Cu²⁺, 1.5 mg/L Pb²⁺ and 0.8 mg/L Ni²⁺ were synthesized based on metals concentration from samples collected from a semiconductor industry effluent. The effects of operation conditions on metals removal using composite adsorbent were investigated. Experimental conditions resulting in optimal metals adsorption were observed at pH 5, 1 g/L dosage and 60 min contact time. It was noted that the percentage of metals removal at the equilibrium condition varied for each metal, with lead recording 99 %, copper 61 % and nickel 20 %, giving metal affinity trend of Pb²⁺ > Cu²⁺ > Ni²⁺ on the adsorbent. Langmuir’s adsorption isotherm model gave a higher R² value of 0.93, 0.89 and 0.986 for copper, nickel and lead, respectively, over that of Freundlich model during the adsorption process of the three metals in matrix solution.     

Speciation and mobility of heavy metals in mud in coastal reclamation areas in Shenzhen,China

Coastal reclamation has been carried out along the coastal areas near Shenzhen, China in a large scale since 1980s by dumping fill materials over the marine mud at the sea bottom. Usually the area to be reclaimed is drained first and some of the mud is air-dried for a few weeks before it is buried by fill. After reclamation, the terrestrial groundwater, which is relatively acidic and with high dissolved oxygen, gradually displaces the seawater, which is alkaline with high salinity. The changes in the burial conditions of mud and the properties of the pore water in the mud may induce the release of some heavy metals into the mud. Field survey confirms that the pH and salinity of the groundwater in the reclamation site are much lower than the seawater. Chemical analyses of mud and groundwater samples collected from the reclamation sites reclaimed in different years indicate that most of the heavy metals in the mud decrease gradually with time, but the heavy metals in the groundwater are increased. The release of heavy metals into pore water due to reactivation of heavy metals in the mud is of environmental concern. To understand why some of the heavy metals can be released from the mud more easily than others, a sequential extraction method was used to study the operationally determined chemical forms of five heavy metals (Cu, Ni, Pb, Zn, and Cd) in the mud samples. Heavy metals can be presented in five chemical forms: exchangeable, carbonate, Fe–Mn oxide, organic, and residual. Ni and Pb were mainly associated with the Fe–Mn oxide fraction and carbonate fraction; Zn was mainly associated with organic fraction and Fe–Mn oxide fraction, while Cu and Cd were associated with organic fraction and carbonate fraction, respectively. If the residual fraction can be considered as an inert phase of the metal that cannot be mobilized, it is the other four forms of heavy metal that cause the noticeable changes in the concentration of heavy metals in the mud. On the basis of the speciation of heavy metals, the mobility of metals have the following order: Pb (36.63%) > Cu (31.11%) > Zn (20.49%) > Ni (18.37%) > Cd (13.46%). The measured metal mobility fits reasonably well with the degree of concentration reduction of the metals with time of burial observed in the reclamation site.     

Effect of Microbial Siderophore DFOB on Pb, Zn, and Cd Sorption Onto Zeolite

Recent studies suggest that siderophores form stable complexes with divalent metals and affect their mobility. In this work, effects of trihydroxamate microbial siderophores and desferrioxamine-B (DFOB) on Pb(II), Zn(II), and Cd(II) sorption by two kinds of synthesized zeolites (13X and Na?CY) as a function of pH were investigated. Results showed that 13X zeolite has a higher sorption affinity for studied metals than Na?CY. DFOB strongly affected metal sorption on both zeolites. Under slightly acidic to neutral condition, DFOB increased the metal sorption on zeolites due to the sorption of positively charged heavy metal?CDFOB complexes. Whereas by increasing pH (>7), the mobilizing effect of DFOB was observed for Pb, Zn, and Cd. DFOB drastically decreased (80?%) Zn sorption in alkaline condition. As a result, siderophores can weaken the treatment efficiency of zeolites and increase the bioavailability of metals in soils. Surface complexation modeling revealed that the effects of DFOB on metal sorption by 13X and Na?CY zeolites can be explained by the differences in their surface charge. In general, the result shows the influence of DFOB on metal sorption by zeolites over the pH range 4?C9 and decreasing in the sequence Zn?>?Pb?>?Cd.