共查询到20条相似文献,搜索用时 62 毫秒
1.
一个用于全球气候变化研究的海洋大气环流耦合模式Ⅰ.模式的形成及性能 总被引:2,自引:3,他引:2
本文初步建立了一个可用于模拟几十年到上百年气候变化的全球大气-海洋-海冰耦合的环流模式(CGCM).该模式采用“预估-校正”的月平均距平耦合方案,把一个两层大气环流模式(AGCM)和一个20层海洋环流模式(OGCM)耦合在一起;由于北冰洋尚未被包括在海洋模式内,因此我们在大气模式中嵌入了一个北冰洋薄层热力学海洋模式.130年的积分试验表明,尽管耦合模式的长时期积分中存在着明显的气候漂移现象,但模式模拟的全球气候的空间分布特征基本上是合理的.这为进一步利用该模式模拟全球增强温室效应提供了数值实验依据. 相似文献
2.
热带印度洋偶极子发生和演变机制的数值研究 总被引:5,自引:0,他引:5
对中国科学院大气物理研究所(IAP)大气科学和地球流体力学数值模拟国家重点实验室(LASG)发展的第三代海洋模式(L30T63 OGCM)进行了改进。分析了该模式1959年1月—1998年12月的40a积分结果,以此研究热带印度洋偶极子发生、发展和消亡的物理机制。对数值模拟结果的分析表明,赤道印度洋表面异常东风引起的异常环流结构是偶极子发生、发展的主要动力学原因,其表面异常东风转换为异常西风所引起的异常环流结构调整是偶极子消亡的主要动力学原因;海气界面热通量异常的交换对热带印度洋海表温度距平偶极子模态的形成和演变起着重要的作用;垂直输送作用是热带印度洋次表层海温偶极子模态发生和演变的主要物理机制。 相似文献
3.
4.
国家气候中心全球海洋资料四维同化系统在热带太平洋的结果初步分析 总被引:6,自引:0,他引:6
介绍了国家气候中心(NCC)“全球海洋资料四维同化系统”(简称NCC-GODAS).该系统包含观测资料预处理系统、插值分析系统和所应用的动力模式.插值分析系统采用四维同化技术方案,在时间上设置一个4周的窗口,将此窗口之内的观测资料以一定的权重插入插值分析系统,在空间上采用三维变分方案.海洋动力模式为“九五”期间LASG研制的L30T63OGCM 1 0版本.文中考察了该系统从1982年到2003年3月在热带太平洋的部分同化分析结果,并与NCEP的再分析资料和EMC/NCEP的太平洋区域海洋资料同化系统的结果进行了对比分析.结果显示,该系统的同化结果(如SST,SSTA,Nino指数,次表层海温变化等)与NCEP的同期同化结果具有很好的一致性.同时,该系统得出的海洋同化资料气候场与海洋模式气候场相比,有显著的改进.表明该系统具有较好的同化能力,其同化结果可为海-气耦合模式进行季节和跨季节的气候预测业务提供可信的海洋初始场资料,同时还可以为相关研究提供海洋分析场. 相似文献
5.
6.
根据应用服务的实际需求,对适用于海洋环境特点的时空分析模式和相关评价模型进行了探讨研究,对适用于系统建设的监测数据的时间分析和空间分析以及相关评价技术进行了应用分析研究,选用GIS技术作为系统基础,构建了基于GIS的海洋监测数据分析评价应用系统,实现了监测数据的自动分析与评价等功能. 相似文献
7.
8.
一个高分辨率的长江口台风风暴潮数值预报模式及其应用 总被引:13,自引:1,他引:13
利用河口海岸海洋模式(ECOM-Si)建立了一个适用于长江口区风暴潮的数值预报模式.该模式采用对岸线有较好拟合能力的自然正交水平坐标系统和能分辨较复杂海底地形的垂直σ坐标系统.模式考虑了长江口径流量对风暴潮的影响,部分地考虑了天文潮和风暴潮非线性相互作用对风暴增水的影响.风暴潮预报的大气强迫场用模型气压场和模型风场.利用所建立的模式对长江口区台风风暴潮进行了8个个例模拟,模拟增水与实测增水的峰值相比较,平均绝对误差不足10cm.利用本研究建立的模式,就气象因子对风暴潮位的敏感性进行了数值试验.试验结果表明,台风中心气压降低(升高)20hPa可导致约100cm的风暴潮位升高(或降低).台风最大风速半径误差对台风增水的变化影响也较显著.试验还表明,长江径流量增加1倍(减半),可以造成风暴潮的平均增加25cm(减小13cm).天文潮位相变化对风暴增水的影响数值试验表明,当台风暴潮与天文潮在不同位相相互作用,可使风暴潮位最大增加达70cm或减小90cm. 相似文献
9.
10.
中国近海环流数值模拟研究综述 总被引:1,自引:0,他引:1
按照研究时间由早期到现代,研究方法由简单到复杂的顺序,综述了近几十年来海洋数值模拟工作在中国近海所取得的研究成果.目前,通过数值模式已经能够基本合理地模拟中国近海的海洋环流,黑潮、台湾暖流、黄海暖流等的路径、流量,对马暖流源区等问题的特征在数值模拟结果中也逐渐清晰.通过分析已有的工作,认为还存在多项关键技术问题,并受对中国近海环流认知程度的限制,中国近海环流的数值模拟研究还需要进一步的发展和完善.在未来的数值模拟研究中,通过变网格或多重网格嵌套技术,实现中国近海高分辨率的数值模式;应用更加符合实际情况的海洋参数化方案,发展风-浪-流-潮耦合模式;结合资料同化技术,发展预报模式等都应是中国近海环流数值模拟研究的重点发展方向. 相似文献
11.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
12.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
13.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
14.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
15.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
16.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
17.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
18.
19.
20.
《海洋学报(英文版)》2014,(11):161-F0003
<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology, 相似文献