Mooring forces and motion responses of pontoon-type floating breakwaters

The experimental and theoretical investigations on the behaviour of pontoon-type floating breakwaters are presented. A two-dimensional finite element model is adopted to study the behaviour of pontoon-type floating breakwaters in beam waves. The stiffness coefficients of the slack mooring lines are idealized as the linear stiffness coefficients, which can be derived from the basic catenary equations of the cable. The theoretical model is supported by an experimental programme conducted in a wave flume. The motion responses and mooring forces are measured for three different mooring configurations, and the results are reported and discussed in detail in this paper. The wave attenuation characteristics are presented for the configurations studied.     

Dynamics of elastically moored floating objects

The two-dimensional problem of wave transformation by, and motions of, moored floating objects is solved numerically as a boundary value problem by direct use of Green's identity formula for a potential function. The cross-sectional shape of the floating object, the bottom configuration and the mooring arrangements may be all arbitrary. For a given incident wave, the three modes of body motion, the wave system and mooring forces are all solved at the same time. A laboratory experiment is conducted to verify the theory. Generally good agreements between the theory and experiments are obtained as long as the viscous damping due to flow separation is small. A numerical experiment indicates that a conventional sluck mooring is to worsen the wave attenuation by a floating breakwater and that a properly arranged elastic mooring can considerably improve the wave attenuation by a floating breakwater.     

双体波浪能装置运动及系泊系统特性研究

波浪能是一种清洁、可再生的新型能源,波浪能发电装置在海上作业时会受到变化的风、浪、流载荷作用,需要系泊系统保证其稳性和安全性。以适用于中国南海500 m水深的振荡双浮体式波浪能发电装置为研究对象,运用频域计算与时域计算结合的方法对双浮体及其系泊系统的运动响应和动力载荷进行计算,获取极端海况与工作海况下浮体运动和系泊缆索张力的时历数据。参照BV船级社NR-493规定的海上浮式结构物系泊安全系数规范,对3种系泊方案进行安全校核和对比分析。选定其中一种系泊方案,通过改变系泊系统以及能量转换器（PTO）的参数,探究参数变化对双体波浪能装置运动响应以及系泊系统特性的影响,为类似应用于深水的双体波浪能装置系泊系统的设计提供参考。     

波浪作用下锚链系泊浮式防波堤动力响应的数值模型研究

浮式防波堤充分利用波能在水深方向的分布特性,在满足工程消浪要求的同时对海域水沙交换影响较小,且能够快速布置,在某些实际工程有一定应用前景。为了深入了解波浪作用下浮式防波堤的动力响应,基于OpenFOAM标准求解器olaFlow,在刚体运动求解计算中植入锚链求解模块MOODY(mooring cable dynamics),实现了基于重叠网格方法的浮体运动与锚链受力耦合求解,建立了锚链系泊浮式防波堤动力响应的二维数值模型。利用该数值模型对锚链系泊单方箱浮式防波堤在波浪作用下的透射系数、运动响应、锚链张力进行了模拟,并和相关试验结果进行了比较。结果表明,模型能够准确模拟二维波浪和浮式防波堤的相互作用,并用于三维模型的改进。     

顺应式海洋平台慢漂运动物理模型试验研究

为研究顺应式海洋平台慢漂运动的影响因素,以截断圆柱和漂浮方箱为例进行了不规则波作用下的慢漂运动模型试验。测量了不同系泊刚度条件下的漂浮方箱以及相同系泊刚度条件下的截断圆柱和漂浮方箱在静水中自由衰减运动和在不规则波中的运动响应,并将运动响应分解成一阶波频运动响应和二阶低频运动响应,分析了系泊刚度和浮体形状对浮体运动的影响。通过物理模型试验发现了系泊刚度及浮体形状对顺应式系泊浮体一阶运动标准差和二阶低频运动平均漂移值和标准差的关系。结果表明由于顺应式浮体的固有周期远离波浪谱峰周期时,系泊刚度以及浮体形状对慢漂运动的一阶运动响应影响不大;二阶低频运动相对偏离平衡位置的平均值和标准差均随系泊刚度增大而减小,浮体形状同样对慢漂运动的二阶低频纵荡运动响应影响较大。试验结果为实际海洋工程的外形选择和系泊刚度选择提供数据支持。     

Stiffness of mooring lines and performance of floating breakwater in three dimensions

In the present paper, the performance of a moored floating breakwater under the action of normal incident waves is investigated in the frequency domain. A three-dimensional hydrodynamic model of the floating body is coupled with a static and dynamic model of the mooring lines, using an iterative procedure. The stiffness coefficients of the mooring lines in six degrees of freedom of the floating breakwater are derived based on the differential changes of mooring lines' tensions caused by the static motions of the floating body. The model of the moored floating system is compared with experimental and numerical results of other investigators. An extensive parametric study is performed to investigate the effect of different configurations (length of mooring lines and draft) on the performance of the moored floating breakwater. The draft of the floating breakwater is changed through the appropriate modification of mooring lines' length. Numerical results demonstrate the effects of the wave characteristics and mooring lines' conditions (slack-taut). The existence of ‘optimum’ configuration of the moored floating breakwater in terms of wave elevation coefficients and mooring lines' forces is clearly demonstrated, through a decision framework.     

Experimental investigation on the dynamic response of a moored wave energy device under regular sea waves

This paper attempts to provide a better understanding of the hydrodynamic behaviour of a floating multi-resonant oscillating column wave energy device which combines the concept of a floating breakwater and a wave energy device. Experiments were conducted on a 1:20 scale model of the floating wave energy device moored by six mooring lines to study the dynamics of the device under regular waves for various scopes. The effect of non-dimensionalized wave frequency parameter on the motion response and mooring force are reported and discussed in detail in this paper.     

多船旁靠系泊作业关键特性试验研究

旁靠带缆作业是实现海上补给、模块吊运、原油外输等运转的常用方式,针对浮式平台与两艘供应船以旁靠方式作业涉及的关键特征进行水池模型试验研究,阐述了旁靠带缆系统和护舷设备的属性和需遵循的规范衡准,深入分析旁靠系缆的张力、护舷的挤压力、船体之间的相对运动特征随有效波高和波浪入射角度等环境参数的变化规律,确定了适用于多船旁靠作业的海况条件。研究表明:波浪能量随有效波高的增大呈现非线性增大趋势,是影响旁靠作业窗口期的主要外部因素,而波浪入射角度对旁靠作业的影响程度与海况有较大关系;三船在纵荡、横荡以及艏摇方向具有明显的跟随性特点,运动响应的幅值和相位比较接近,浮式平台与供应船之间的相对运动较小,完全可满足作业要求。垂荡、横摇以及纵摇这三个波频方向,各船的运动并不同步,相对运动大,是影响多船旁靠作业窗口期的主要因素;有效波高为2.5 m的海况条件可满足多船旁靠要求。相关结论为实际的工程操作提供参考。     

新模块化单桩缓冲系泊浮式集成结构系统研究

为配合我国南海重要岛礁陆域拓展及海洋资源开发,提出了一种基于新型单桩缓冲系泊与波浪能装置(WEC)集成的具有潮汐自适应特性的模块化浮体结构系统。基于三维势流理论,综合考虑浮体模块与单桩缓冲结构的相对运动及相关波浪能装置的机械耦合机理,重点研究了新型单模块浮式结构系统在典型海况下的动力响应特征,获得了单桩缓冲系泊系统的初步优化设计参数,并对极端海况进行安全校核,提出了优化自存策略。数值结果表明,此带有波浪能装置的新型单桩缓冲系泊系统,不仅可以有效地降低浮体模块的运动响应幅值并改善平台舒适度,还可以获得可观的发电量,而且在极端海况下,可以通过调整阻尼装置系统来稳定浮体模块的运动。     

Impact Analysis of Air Gap Motion with Respect to Parameters of Mooring System for Floating Platform

In this paper, the impact analysis of air gap concerning the parameters of mooring system for the semi-submersible platform is conducted. It is challenging to simulate the wave, current and wind loads of a platform based on a model test simultaneously. Furthermore, the dynamic equivalence between the truncated and full-depth mooring system is still a tuff work. However, the wind and current loads can be tested accurately in wind tunnel model. Furthermore, the wave can be simulated accurately in wave tank test. The full-scale mooring system and the all environment loads can be simulated accurately by using the numerical model based on the model tests simultaneously. In this paper, the air gap response of a floating platform is calculated based on the results of tunnel test and wave tank. Meanwhile, full-scale mooring system, the wind, wave and current load can be considered simultaneously. In addition, a numerical model of the platform is tuned and validated by ANSYS AQWA according to the model test results. With the support of the tuned numerical model, seventeen simulation cases about the presented platform are considered to study the wave, wind, and current loads simultaneously. Then, the impact analysis studies of air gap motion regarding the length, elasticity, and type of the mooring line are performed in the time domain under the beam wave, head wave, and oblique wave conditions.     

波浪作用下方箱-水平板浮式防波堤时域水动力分析

在线性化势流理论范围内求解方箱-水平板浮式防波堤的波浪绕射和辐射问题,从时域角度分析了浮式防波堤的水动力特性.采用格林函数法将速度势定解问题的控制微分方程变换成边界上的积分方程进行数值求解,浮式防波堤的运动方程采用四阶Runge-Kutta方法求解.对不同层数水平板的浮式防波堤的波浪透射系数、运动响应和锚链受力进行了计算分析,结果表明方箱相对宽度对方箱-水平板浮式防波堤的波浪透射作用有重要的影响,透射系数随着方箱相对宽度的增加而减小.对于方箱加二层水平板的浮式防波堤,在本研究的计算条件下,当方箱相对宽度从0.110增加至0.295时,透射系数从0.88减小至0.30.水平板有利于增加浮式防波堤对波浪的衰减作用,但随着水平板层数从0增加至2,这种波浪衰减作用增加的程度趋弱.方箱-水平板的浮式防波堤的运动量小于单一方箱防波堤的运动量.与此对应,方箱-水平板防波堤的锚链受力小于单一方箱防波堤的锚链受力.     

风浪流中涡激共振对Spar型浮式风机运动响应的影响

以Spar型浮式风机为研究对象,研究涡激力对于浮式风机系统运动的影响。对多体动力学软件FAST进行二次开发,加入涡激力的计算接口,实现了在平台涡激、波激、空气动力载荷及系泊联合作用下的Spar浮式风机系统的运动响应的计算。计算了在风、浪、流联合作用下,频率锁定现象发生时,Spar基础的运动响应,分析了风浪下Spar风机运动响应的涡激运动特性,并研究了不同的入流角度的影响。结果表明:考虑涡激力后,Spar基础的横荡运动明显增大;风浪流同向时,风浪的存在会抑制流载荷引起的横荡在涡泄频率的运动;在流与风浪垂直时,会激发Spar基础的更大的纵荡运动响应。     

Experimental Study of Wave Attenuation in Trapezoidal Floating Breakwaters

A comprehensive experimental study was carried out on the regular wave attenuation with a trapezoidal pontoontype floating breakwater(FB) in deep water. The functionalities of two simple FB geometries consist of a rectangle and a trapezoid with the slope of 60° were investigated under the wave attack. A two-dimensional wave flume was used in the experiment; the incident, transmitted waves, mooring line forces and motion responses of the floating breakwaters were measured. Also the influence of the sea state conditions(incident wave height and wave period)and structural parameters(draught of the structure) were investigated using the trapezoidal FB. Our experimental results indicated that the trapezoidal FB significantly reduced the wave transmission and mooring line force when compared with rectangular FBs. A new formula was developed in order to predict the value of the transmission coefficient in trapezoidal FBs with the slope of 60°. Experimental data showed to be consistent with the results of the formula.     

内孤立波中半潜平台动力响应特性

基于内孤立波mKdV理论,采用时域有限位移运动方程,结合改进的Morison公式,研究了两层流体中内孤立波与带分段式悬链系泊约束半潜平台的相互作用问题。针对东沙群岛南部海域附近某实测内孤立波特征参数,计算分析了在该内孤立波作用下SEDCO-700型半潜平台的内孤立波载荷、运动响应及其系泊张力的变化特性。研究表明,内孤立波不仅会对半潜平台产生突发性冲击载荷作用,使其产生大幅度水平漂移运动,并导致其系泊张力显著增大,因此在半潜平台等深海平台的设计与应用中,内孤立波的影响是不可忽视的。     

Experimental and numerical investigations on the intact and damage survivability of a floating–moored oscillating water column device

This paper investigates the intact and damage survivability of a floating–moored Oscillating Water Column (OWC) device using physical model experiments and Computational Fluid Dynamics (CFD) simulations. Different extreme wave conditions have been tested using irregular and regular wave conditions. The device was moored to the tank floor via four vertical taut lines and the effect of the mooring line pre–tension on the device response was studied. It was found that the instantaneous position of the floating device was a key factor in the survivability analysis such that a certain irregular wave train that might not include the largest wave could induce the maximum response. Reducing the pre–tension minimized the maximum surge, but significantly increased the maximum tension due to mooring slack events causing snatch loads. A design regular wave with a period equal to the peak period and a height of 1.9–2.0 times the significant wave height could reasonably predict the same maximum line tension as the irregular sea state, but a smaller wave height was required to achieve the maximum surge. A single failure in the mooring system increased the maximum tension by 1.55 times the intact tension. For a damaged mooring system, using the same design regular wave condition derived from the survivability analysis with an intact mooring system could result in overestimating the maximum tension by more than 20% in comparison to the tension from the irregular sea state, but a smaller regular wave height or a different regular wave condition representing another sea state could lead to the same maximum tension. This highlighted the importance of investigating survival conditions with a damaged mooring system instead of simply using the same conditions derived for the intact mooring system.     

混合模块大型浮式结构系统耦合动力响应分析

针对具有天然岛礁庇护或人工庇护的温和海洋环境,提出了一种混合模块大型浮式结构系统,即水动力性能更优的半潜式模块作为内侧主模块,消波效果更优的箱式模块作为外侧浮式防波模块和波浪能发电模块.波浪能装置利用外侧箱式模块与内侧半潜式模块的相对纵摇运动进行发电.考虑模块间多体水动力耦合效应和连接器机械耦合效应,基于ANSYS-AQWA程序重点研究了典型海况下混合5模块串联浮式结构系统的动力响应特征.结果表明,外侧箱式模块和波浪能发电装置能有效减弱内侧半潜式主模块运动响应、连接器动力响应和系泊缆绳张力,并且提供一定的能源供给.所得研究成果可为模块化超大型浮式结构系统的防波—发电集成系统设计提供参考.     

一种新型Semi-Spar式海上风机平台系泊系统优化分析

参考英国的Kincardine风机采用的新式的Semi-Spar概念,结合spar式基础和半潜式基础的特点,提出了一种新式海上浮式风机平台模型,并基于三维势流理论,利用AQWA软件进行水动力计算,验证新式平台可靠性。分析了在风、浪、流荷载联合作用下,锚链竖向夹角、系缆数量对风机浮式平台运动性能和系泊张力的影响,对系泊系统进行优化,并验证极端工况下的可靠性。结果证明风机平台水平运动和纵摇运动幅值较小,但垂荡幅值略大,而通过减小锚链竖向夹角可以控制平台运动响应幅值,增加系缆数量可以同时减小系泊张力大小。计算结果证明了新型Semi-Spar式海上风机平台可行性,为浮式风机平台及系泊系统的设计提供参考。     

Hybrid Verification of A Deepwater Cell-Truss Spar

Hybrid model testing technique is widely used in verification of a deepwater floating structure and its mooring system,but the design of the truncated mooring systems which can reproduce both static and dynamic response same as the full-depth mooring system is still a big challenge,especially for the mooting systems with large truncation.A Cell-Tress Spar operated in 1500 m water depth is verified in a wave basin with 4 m water depth.A large truncation factor arises even though a small model scale 1:100 is adopted.Computer program modules for analyzing the static and frequency domain dynamic response of mooting line are combined with multi-objective genetic algorithm NSGA-II to optimize the truncared mooting system.Considering the asymmetry of layout of mooring hnes,two different truncated mooring systems are respectively designed for both directions in which the restoring forces of the.mooting system are quite,different.Not only the static characteristics of the mooting systems are calibrated,but also the dynamic responses of the single truncated mooting line are evaluated through time domain numerical simulation and model tests.The model test results of 100-year storm in the GOM are reconstructed and extrapolated to a full depth.It is found that the experimental and numerical resuits of Spar wave frequency motion agree well,and the dynamic responses of the full-depth mooring lines are better reproduced,but the low frequency surge motion is overestimated due to the smaller mooring-induced damping.It is a feasible method adopting different truncated mooring systems for different directions in which the restoring force characteristics are quite different and cannot be simulated by one truncated mooring system.Hybrid verification of a deepwater platform in wave basin with shallow water depth is still feasible if the truncated mooring systems are properly designed,and numerical extrapolation is necessary.     

Scattering of gravity waves by multiple surface-piercing floating membrane

Interaction of surface gravity waves with multiple vertically moored surface-piercing membrane breakwaters in finite water depth is analyzed based on the linearized theory of water waves. The study is carried out using least square approximation method to understand the effect of the vertical membrane as effective breakwater. Initially the problem is studied for a single membrane wave barrier but for the case of multiple membrane breakwaters the study is carried out using the method of wide-spacing approximation. In the present study, it is observed that the deflection of the membrane is reduced with the increase in the stiffness parameter of the mooring lines attached to the membrane. In the case of single surface-piercing membrane with moored and fixed edge conditions, the reflection and transmission coefficients are compared and analyzed in detail. The resonating pattern in the reflection coefficients are also observed for multiple floating membrane which can also be referred as Bragg's resonance. In the presence of the porosity constant the wave reflection is also observed to be decreasing and the change in the distance between the vertical floating breakwaters also helps in the attenuation of wave height. It is observed that the presence of multiple floating breakwater helps in the reduction of wave height in the transmitted region.     

偏航工况下海上浮式风力机基础运动响应及锚泊载荷影响分析

海上浮式风力机受风、浪、流等外部载荷影响,运营期间经常处于偏航工况,给风力机基础运动响应和锚泊载荷带来重要影响.基于经典叶素动量理论及势流理论,建立海上浮式风力机水—气动力耦合分析模型,对在非定常风、不规则波浪联合作用下,风力机偏航时基础运动响应及锚泊载荷等进行分析.研究发现,额定风速工况下,风力机偏航对平台纵荡和纵摇运动影响较大,偏航30°时纵荡和纵摇平均值比偏航0°时分别下降20.68％和37.36％,垂荡运动响应受风力机偏航影响较小;锚泊载荷变化趋势与平台运动及锚链布置有关,平台纵荡对锚泊载荷影响较大,偏航30°时锚链#1有效张力平均值比偏航0°时下降12.98％.