On the nonlinear hydrodynamic forces for a ship advancing in waves

In this paper, using a second-order steady-state approach and a three-dimensional (3D) pulsating source distribution method derives the nonlinear hydrodynamic forces on a ship advancing in waves. The nonlinear hydrodynamic forces considered here consist of the mean lateral drifting force and the added resistance, which can be expressed as products of the ship-motion responses, the radiation potential, diffraction potential and the incident-wave potential. All related velocity potentials applied in the calculations are in 3D form. The Series 60 and Marine ship hulls are used for numerical calculations and the results are compared with existing experimental data and two-dimensional (2D) solutions. The comparisons show that the results obtained in the paper generally agree with experimental data well. It is also found that the nonlinear hydrodynamic forces obtained based on the present 3D source distribution methods are indeed improved in some calculations compared with the 2D method, especially for the mean lateral drifting force.     

A parametric study of wave loads on trimaran ships traveling in waves

In this paper, we present a spectral analysis based on wave loads to select suitable side-hull arrangements for a trimaran ship traveling in waves. Neglecting the steady flow effect, the three-dimensional source-distribution method, using a pulsating source potential incorporating the panel method, is adopted to solve the corresponding hydrodynamic coefficients. The significant values for wave loads, including shear forces, bending moments, and torsion moments at different locations on the main hull and connected deck with respect to different staggers and clearances, are derived by the spectral analysis. Several ship speeds and wave headings are also considered for comparison. This study offers more information for selecting the side-hull arrangement from the viewpoint of wave loads on trimaran ships, which may be regarded as helpful references for seakeeping design of these types of ships.     

VLCC油船波浪增阻预报方法的实用修正

近年来随着船舶环保和营运性能要求更高,波浪增阻预报正变得越来越重要。由于存在假设和简化,势流理论方法的短波增阻预报精度差,而经验方法在不同船型中的适用性不强。以有航速VLCC船迎浪航行为例,考虑吃水和航速影响,对理论和半经验方法的波浪增阻结果进行验证和比较分析,并总结出适用特定船型的快速精确预报方法。理论方法基于水平线段移动脉动源的三维面元法求解速度势问题,进而采用三维船体辐射能量法得到船舶辐射增阻,基于二阶波浪力定常分量公式计算得到绕射增阻;经验方法采用ISO15016-2015推荐的STAWAVE2方法。通过分析辐射和绕射增阻占比,讨论了目前方法的适用范围,进而对半经验方法的修正系数进行了研究,给出了反映相似船型和航速特征的改进公式。     

海上风机稳桩施工平台吊装过程中的多船水动力干扰特性与动力响应分析

建立双臂起重船从运输船上起吊大型稳桩施工平台的吊装系统模型,其中,起重船与运输船呈T型布置。首先基于势流理论,采用专业水动力分析软件AQWA开展了双船系统的频域水动力分析,分析双船起吊系统的水动力干扰特性和遮蔽效应,并对双船间隙自由液面进行黏性修正从而提高频域多体水动力分析的精度。进一步采用频域—时域方法对起吊耦合系统进行参数分析,探究起吊速度、波浪周期等对吊索张力和起重船运动的影响规律。分析多个工况下运输船的遮蔽效应对起吊系统的影响。结果表明,对间隙流体施加阻尼自由液面边界条件可以一定程度提高计算模型的精度,在某些周期的迎浪条件下运输船对起重船的遮蔽效应可以降低吊装系统的响应;起吊速度对时域动力响应的影响较小;周期为8 s的规则波引起过大的动力响应。     

Seakeeping of two ships in close proximity

Underway replenishment is an essential component of long-term naval operations. During underway replenishment, two ships travel in close proximity at moderate forward speed. This paper examines the hydrodynamic interactions that can influence seakeeping during such operations. Presented numerical predictions include the influence of interaction effects on hydrodynamic forces for two ships in waves. A scarcity of validation material for numerical predictions prompted new towing tank experiments for two ships in waves. The experiments used semi-captive models, and the numerical code was modified to include restraining forces for specified modes. The numerical predictions and experiments show that the presence of a larger ship can significantly influence the motions of a smaller ship in close proximity.     

Nonlinear hydrodynamic pressures on structures during earthquakes

The nonlinear hydrodynamic pressures acting on the surface of rigid structures during earthquakes is examined analytically by a two-dimensional potential flow theory. The ground acceleration is assumed to be horizontal and harmonic. When the relative displacement, the ratio of horizontal displacement of structures to the undisturbed water depth, is small. A perturbation method, using the relative displacement as perturbation parameter, is adopted to analyze the nonlinear hydrodynamic pressures. The effect of surface waves on the hydrodynamic pressure distribution is included in this research. Numerical values are given for different wave effect parameters.     

Wave effects on ascending and descending motions of the autonomous underwater vehicle

In the paper, a hydrodynamic model including the characteristics of maneuvering and seakeeping is developed to simulate the six-degree of freedom motions of the underwater vehicle steering near the sea surface. The corresponding wave exciting forces on the underwater vehicle moving in waves are calculated by the strip theory, which is based on the source distribution method. With the hydrodynamic coefficients relevant to the maneuvering and seakeeping, the fourth-order Runge–Kutta numerical method is adopted to solve the equations of motions and six-degrees of freedom of the motions for the underwater vehicle steering near the free surface can be obtained. The wave effect on the corresponding motions of the underwater vehicle is investigated and some interesting phenomena with respect to different wave frequencies and headings are observed. The hydrodynamic numerical model developed here can be served as a valuable tool for analyzing the ascending and descending behaviors of the underwater vehicle near the sea surface.     

Radiation and scattering of surface waves by a group of submerged,horizontal, circular cylinders

One of the major methods available for investigating the interaction of water waves with arbitrarily shaped structures is based on the classical theory of Green's functions. For multiple bodies, however, this technique can become expensive in terms of both computer storage and execution time and it is desirable for special geometrics where possible, to seek simpler methods. In this paper, the radiation and scattering of surface waves by a group of parallel, horizontal, circular cylinders, submerged in deep water is studied using a method involving multipole potentials. The method is developed for any number of submerged, parallel, horizontal cylinders with arbitrary positions and radii. In particular, hydrodynamic coefficients are determined for various configurations of two and three cylinders and a comparison is made with results obtained for a cylinder in isolation.     

Wave characteristics past a flexible fishnet

The scattering of surface waves by a flexible fishnet is studied analytically. The fishnet is modelled as a porous flexible barrier displaced solely by hydrodynamic force like a catenary. The objective is to investigate how a flexible permeable barrier affects the passing waves in the way they are transmitted and reflected, as observed by the fact that the water inside a fishfarm surrounded by fishnets is significantly calmer than that outside. The boundary value problems are solved by defining the reflection coefficient in terms of velocity potential and then the full solutions are obtained by suitable application of the eigenfunction expansion method and the least squares approximation method. The variations of the reflection coefficient, hydrodynamic pressure, barrier deformation and surface wave elevation are determined with respect to the barrier length, porosity and stiffness. It is observed that as the fishnet gets more flexible, its deformation increases and the reflection coefficient decreases, whereas as the fishnet gets more porous, more water can pass through it and thus the reflection coefficient, barrier deformation and the hydrodynamic force are reduced. The flexibility of the barrier behaves like its porosity by allowing more wave energy to act on it through its deformation and hence reduce the reflection and hydrodynamic force of the incident waves acting on the barrier.     

Optimization Design of Minimum Total Resistance Hull Form Based on CFD Method

In order to reduce the resistance and improve the hydrodynamic performance of a ship, two hull form design methods are proposed based on the potential flow theory and viscous flow theory. The flow fields are meshed using body-fitted mesh and structured grids. The parameters of the hull modification function are the design variables. A three-dimensional modeling method is used to alter the geometry. The Non-Linear Programming (NLP) method is utilized to optimize a David Taylor Model Basin (DTMB) model 5415 ship under the constraints, including the displacement constraint. The optimization results show an effective reduction of the resistance. The two hull form design methods developed in this study can provide technical support and theoretical basis for designing green ships.     

铰接柱式波能转换装置的水动力分析

铰接柱式波能转换装置是一种新型的波能转换装置,本文为该装置提出了一个合理而又便于计算的水动力学模型,并采用三维源分布法对该装置进行了水动力分析,通过与该装置的模型试验结果的比较,显示出所得的计算结果是令人满意的。     

基于动态耦合的FPSO串靠外输所需拖力快速预报

以极浅水作业水深的FPSO串靠外输作业为背景,研究穿梭油轮尾部定位拖轮所需拖力大小,提出了基于动态耦合效应的拖轮拖力直接计算方法。基于三维势流理论,考虑浮式生产储油平台(FPSO)与穿梭油轮之间相互水动力干扰,进行动态耦合计算,根据力学平衡原理求得所需的拖轮拖力并分析其影响因素。结果表明:动态耦合模型算出的所需拖力值较之准动态模型更安全、经济;当FPSO与穿梭油轮距离为80 m时,既能保证外输安全性又能保证经济性;增大两船间距、增加穿梭油轮吃水、两船间采用双缆系泊,均能有效降低所需的拖轮拖力。研究结果可为FPSO串靠外输作业操作提供指导,具有一定的工程实用性。     

不规则波作用下的船舶撞击作用

随着波谱理论研究的发展,各种海工结构及船舶的荷载及其内力分析也日趋应用不规则波的计算方法。目前对于外海码头在波浪作用下的船舶撞击荷载还应用规则波的研究方法,对其应用不规则波分析方法的途径以及在考虑波谱作用后会有怎样的结果等问题目前还较少研究。本文试图对此问题进行初步的分析。     

Experimental and Numerical Investigations of Ship Parametric Rolling in Regular Head Waves

Parametric rolling is one of five types of the ship stability failure modes as proposed by IMO. The periodic change of the metacentric height is often considered as the internal cause of this phenomenon. Parametric rolling is a complex nonlinear hydrodynamic problem, often accompanied by large amplitude vertical motions of ships. In recent years,the Reynolds-averaged Navier–Stokes(RANS) equation simulations for viscous flows have made great progress in the field of ship seakeeping. In this paper, the parametric rolling for the C11 containership in regular waves is studied both experimentally and numerically. In the experiments, parametric rolling amplitudes at different drafts, forward speeds and wave steepnesses are analyzed. The differences in the steady amplitudes of parametric rolling are observed for two drafts. The effect of the incident wave steepness(or wave amplitude) is also studied, and this supports previous results obtained on limits of the stability for parametric rolling. In numerical simulations, the ship motions of parametric rolling are analyzed by use of the potential-flow and viscous-flow methods. In the viscousflow method, the Reynolds-averaged Navier–Stokes equations are solved using the overset grid method. The numerical accuracies of the two methods at different wave steepnesses are also discussed.     

Domain decomposition and matching for time-domain analysis of motions of ships advancing in head sea

A domain decomposition and matching method in the time-domain is outlined for simulating the motions of ships advancing in waves. The flow field is decomposed into inner and outer domains by an imaginary control surface, and the Rankine source method is applied to the inner domain while the transient Green function method is used in the outer domain. Two initial boundary value problems are matched on the control surface. The corresponding numerical codes are developed, and the added masses, wave exciting forces and ship motions advancing in head sea for Series 60 ship and S175 containership, are presented and verified. A good agreement has been obtained when the numerical results are compared with the experimental data and other references. It shows that the present method is more efficient because of the panel discretization only in the inner domain during the numerical calculation, and good numerical stability is proved to avoid divergence problem regarding ships with flare.     

Influence of structural flexibility and wave interference on dynamic behavior of idealized offshore platform

An approximate method is presented to estimate the hydrodynamic loading and structural response of an idealized offshore platform subjected to a regular train of linear surface waves. The platform is taken to consist of four bottom-mounted, flexible, circular cylinders supporting a rigid deck and is assumed to be aligned parallel to the incident wave direction. The response of each column is assumed to be one-dimensional and to be governed by linear beam theory. The solution technique for the fluid velocity potential involves replacing scattered waves by equivalent plane waves together with non-planar, first-correction terms, and can be shown to be a large spacing approximation.Numerical results are presented which show the effect of hydrodynamic interference and structural flexibility on the platform response.     

Diffraction–radiation of multiple floating structures in directional waves

The dynamics of multiple floating structures have been studied using the finite element method. The emphasis is on the hydrodynamic behaviour of multiple bodies under a multi-directional wave field. A two-dimensional numerical model has been adopted to evaluate hydrodynamic coefficients and forces in an oblique wave field. The responses in sway, heave and roll modes are reported. The linear filter technique is then used to extrapolate the responses under directional waves. The effect of mean wave direction and directional homogeneity on the hydrodynamic behaviour of the structure is studied. Based on the present study, it is found that the two-dimensional model is applicable to investigate the wave-structure interaction problems of the type herein considered.     

Slow drift oscillations of a ship in irregular waves

A procedure to calculate horizontal slow drift excitation forces on an infinitely long horizontal cylinder in irregular beam sea waves is presented. The hydrodynamic boundary-value problem is solved correctly to second order in wave amplitude. Results in the form of second order transfer functions are presented for different two-dimensional shapes. It is concluded that Newman's approximative method is a practical way to calculate slow drift excitation forces on a ship in beam sea and suggested that it may be used in a more general case. Applications of the results for moored ships are discussed.     

Prediction of design wave loads of the ocean structure by equivalent irregular wave approach

The present study is employing the equivalent irregular wave approach to predict the wave loads for a ship encountering the worst sea state with respect to the critical dynamic loading parameter. Two different hydrodynamic numerical models, i.e. 3D pulsating source technique and 3D translating pulsating source technique, are applied to calculate the corresponding RAO of the ship moving in waves. Incorporating the RAO of the related physical properties, we can calculate the extreme value for the corresponding ship loading factor, which can be regarded as the worst sea state in the service lifetime of the ship. With the time and period of the occurrence of the corresponding extreme value, we can simulate the time history of the wave load in this period, which is so-called equivalent irregular wave approach. Comparing with the results calculated by the traditional equivalent regular wave approach, we find that the equivalent irregular wave approach can simulate the corresponding wave load more realistic, especially for dynamic pressure. Using the equivalent irregular wave approach can offer the effective and practical base for the ship structural analysis.