水平循环荷载下海上风电楔形单桩土体变形研究

海上风电工程主要受到风、波浪及洋流等产生的水平循环荷载作用,本文研究楔形单桩基础在水平循环荷载作用下的变形规律,并探讨不同循环荷载对变形规律产生的影响,以确保风电设施正常运行。通过数值模拟建立海上风电单桩-海床模型,考虑土体超孔隙水压力的演变规律及土体致密规律,土体采用UBC3D-PLM本构模型。本文重点讨论并分析在不同水平循环荷载作用下楔形单桩基础与等截面单桩基础的桩周土体位移、塑性应变及桩基累计转角位移之间的差异。研究结果表明：楔形结构会降低桩周土体位移及塑性应变,使得楔形单桩基础旋转中心位置更低,产生倾覆的可能更小,当循环荷载比为0.7时,累计转角位移能减少41.86%;循环荷载越大,楔形单桩基础水平受荷特性越好,累计位移减少量的增长率越高。研究成果可为今后海上风电基础的选择与设计提供参考。     

Centrifuge modelling of lateral loading behaviour of a “semi-rigid” Mono-pile in soft clay

Abstract

Mono-pile foundations have been widely used for offshore wind turbines principally due to their convenient construction and cost-effective nature. So far, little attention has been paid to large diameter “semi-rigid” piles that have distinct behaviours from flexible or ideally rigid piles. This paper presents a series of centrifuge model tests to study the deforming and bearing characteristics of a 5.9 dia. semi-rigid pile under lateral loadings in kaolin clay. For monotonic loading, a modified p–y curve analysis model considering rotational soil flow near the rotation centre of pile was proposed, highlighting the limitation of classic plane-strain based plasticity models to evaluate the ultimate lateral pile-soil resistance. For cyclic loading, a strong correlation between the degree of soil degradation and cyclic load amplitude was identified. Besides, a degradation factor model, accounting for various cyclic stress levels and soil depths, was proposed, which can be used to assess the accumulative displacement of semi-rigid piles under cyclic loadings in soft clay.     

Scour effects on bearing capacity of composite bucket foundation for offshore wind turbines

Abstract

Composite bucket foundation (CBF) is a wide-shallow foundation for offshore wind turbines, which can be transported and installed with the turbine as one unit at a one-step operation. Compared with deep pile foundations, its structural stability is more sensitive to the scouring by waves and currents. In this paper, a three-dimensional finite element model with CBF and surrounding soil is established to estimate the failure mode at different given soil scour conditions. The loading on CBF for offshore wind turbines is characterized by relatively small vertical loading V, larger horizontal loading H, and bending moment M, and the effect of erosion on bearing capacity of CBF is determined by using the fixed displacement ratio method. In addition, the failure envelopes of the CBF applied in H–M and V–H–M loading modes are obtained. Results indicate that the bearing capacity of CBF under horizontal loading and bending moment will be significantly reduced by the decrease in the embedded depth of CBF due to the scouring depth and extent, as well as the H–M, and V–H–M failure envelopes. The structural stability safety factor of CBF under different scouring conditions can be obtained through the three-dimensional envelope surface with respect to scouring depth and extent.     

Behavior of Pile Group with Elevated Cap Subjected to Cyclic Lateral Loads

The pile group with elevated cap is widely used as foundation of offshore structures such as turbines, power transmission towers and bridge piers, and understanding its behavior under cyclic lateral loads induced by waves, tide water and winds, is of great importance to designing. A large-scale model test on 3×3 pile group with elevated cap subjected to cyclic lateral loads was performed in saturated silts. The preparation and implementation of the test is presented. Steel pipes with the outer diameter of 114 mm, thickness of 4.5 mm, and length of 6 m were employed as model piles. The pile group was cyclic loaded in a multi-stage sequence with the lateral displacement controlled. In addition, a single pile test was also conducted at the same site for comparison. The displacement of the pile cap, the internal forces of individual piles, and the horizontal stiffness of the pile group are presented and discussed in detail. The results indicate that the lateral cyclic loads have a greater impact on pile group than that on a single pile, and give rise to the significant plastic strain in the soil around piles. The lateral loads carried by each row of piles within the group would be redistributed with loading cycles. The lateral stiffness of the pile group decreases gradually with cycles and broadly presents three different degradation patterns in the test. Significant axial forces were measured out in some piles within the group, owing to the strong restraint provided by the cap, and finally lead to a large settlement of the pile group. These findings can be referred for foundation designing of offshore structures.     

Analysis and Design of Monopile Foundations for Offshore Wind-Turbine Structures

Offshore wind turbines (OWTs) are generally supported by large-diameter monopiles, with the combination of axial forces, lateral forces, bending moments, and torsional moments generated by the OWT structure and various environmental factors resisted by earth pressures mobilized in the soil foundation. The lateral loading on the monopile foundation is essentially cyclic in nature and typically of low amplitude. This state-of-the-art review paper presents details on the geometric design, nominal size, and structural and environmental loading for existing and planned OWT structures supported by monopile foundations. Pertinent ocean-environment loading conditions, including methods of calculation using site-specific data, are described along with wave particle kinematics, focusing on correlations between the loading frequency and natural vibration frequency of the OWT structure. Existing methods for modeling soil under cyclic loading are reviewed, focusing in particular on strain accumulation models that consider pile–soil interaction under cyclic lateral loading. Inherent limitations/shortcomings of these models for the analysis and design of existing and planned OWT monopile foundations are discussed. A design example of an OWT support structure having a monopile foundation system is presented. Target areas for further research by the wind-energy sector, which would facilitate the development of improved analyses/design methods for offshore monopiles, are identified.     

海上风机吸力式桶形基础承载特性研究综述

风机基础作为海上风机整体结构的重要组成部分,承受着上部风机所受到的风浪流荷载,并且对风机的安全性及可靠性至关重要。吸力式桶形基础由于其安装简单和可重复利用等优点,在海洋平台基础中得到了广泛应用,并逐步应用于海上风机基础中。但由于海上风机与海洋平台在海洋环境中的荷载工况有一定的差别,仍需要通过对其承载特性研究现状进行全面认识,以实现吸力式桶形基础在海上风机基础中的可靠应用。文中通过总结和评价现有研究对桶形基础在不同土体条件以及荷载条件下进行试验及数值模拟分析得到的研究结果,综述了静荷载和循环荷载作用下砂土和黏土中的吸力式桶形基础的承载特性研究现状,以及海上风机吸力式桶形基础的相关研究。文章展望了目前应用于海上风机基础的桶形基础仍缺乏的研究,为海上风机吸力式桶形基础的可靠应用及后续研究提供重要参考。     

海上风电楔形单桩基础竖向承载力特性分析

为提高基础利用率增加海上风电设施的可行性，对楔形单桩基础竖向承载力特性进行研究分析。采用PLAXIS 3D 有限元软件建立楔形单桩基础模型，从桩侧摩阻力、桩侧法应力及土体位移对比分析楔形单桩基础与等截面单桩竖向承载特性差异，并探讨内摩擦角、楔角及楔高对承载力的影响。研究表明：楔形单桩基础竖向承载力高于等截面单桩基础，且承载力随着楔角、楔高的增大而增大，提高率最大达24.786%。倾斜侧壁的引入改变了桩侧摩阻力的传递规律；倾斜侧壁挤密桩周土体，桩侧摩阻力与法向应力增大，从而有效提高单桩基础的竖向承载力。研究成果可为今后海上风电单桩基础截面型式的设计提供参考。     

Natural frequency of offshore wind turbines on rigid and flexible monopiles in cohesionless soils with linear stiffness distribution

A simplified method is introduced to obtain the fundamental frequency of offshore wind turbines supported by monopile foundations. Soil-pile interaction is modeled based on Winkler approach and concept of beam on elastic foundation. The soil is considered to have linearly varying modulus of subgrade reaction along depth which is a typical assumption for cohesionless soils. Rayleigh method which is based on conservation of total energy of the system is utilized. Firstly the natural frequency of the system with rigid pile is derived and then an innovative procedure is introduced to take pile flexural stiffness into consideration. Comparison between results of the present method with those of a numerical FE model for a typical 2 MW wind turbine structure shows excellent agreement for rigid pile and flexible pile with small value of slenderness ratio. The agreement is also good for flexible pile with higher slenderness ratios. A parametric study is carried out to investigate the effect of important parameters of foundation including pile slenderness ratio, pile aspect ratio and pile mass on the system natural frequency.     

桩-筒组合基础在单层黏土中水平承载性能分析

桩-筒组合基础是将单桩基础与筒型基础组合的一种新型海上风电基础形式,其受力模式不同于传统桩基基础,优点是可通过合理减小桩长、桩壁厚等途径提高承载性能。基于极限地基反力法,提出单层黏土中桩-筒组合基础受力模式及水平承载力的计算方法。利用力加载和位移加载两种控制方法进行数值分析,研究水平承载性能的影响因素。结果表明,在一定范围内,桩-筒组合基础水平承载性能随桩入土深度、桩壁厚、筒外径的增大而提高。基于实际工程,对等用钢量的单桩基础与组合基础进行比较计算,结果表明,桩-筒组合基础可有效降低基础倾斜度和位移,提高承载性能。     

离岸裙式吸力基础在砂土地基中沉贯性研究

吸力基础是海洋工程中新型的一种基础型式,广泛应用于海洋平台、海洋浮动式结构等,近年来,也被作为浅海离岸风力发电工程的基础。吸力基础易遭受较大的水平动力荷载和弯矩,从而可能产生较大水平位移和转角;同时,由于海床冲刷,会降低其承载能力。为克服这些不足,提出了一种新型吸力基础———裙式吸力基础,把分析传统吸力基础砂土中的沉贯方法,拓广到裙式吸力基础中,研究该基础型式在砂土中的可沉贯性以及所需的吸力;并与同情况下的传统吸力基础进行了比较,证明了所提出的裙式吸力基础具有较好的沉贯性能,具有工程实践推广价值。     

Degradation of lateral bearing capacity of piles in soft clay subjected to cyclic lateral loading

Abstract

In this article, the degradation of the lateral bearing capacity of piles in soft clay subjected to cyclic lateral loading is studied numerically. A modified kinematic hardening constitutive model is employed to simulate the degradation of soft clay after cyclic loading. The modified model is verified by comparing the numerical simulation results with the results of centrifuge model tests. Furthermore, the modified model is applied to numerical simulations for evaluating the lateral bearing capacity of piles in soft clay subjected to cyclic lateral loading. The degradation of the lateral bearing capacity of piles in soft clay after different cyclic displacement levels and different numbers of cycles is investigated. The study reveals that the modified kinematic hardening constitutive model can effectively estimate the cyclic degradation behavior of piles in soft clay subjected to cyclic lateral loading. The degradation of the ultimate lateral bearing capacity progresses slowly with increasing cyclic displacement level for fewer cycles, and the degradation develops significantly at higher levels of cyclic displacement after applying a larger number of cycles.     

Estimation of Undrained Bearing Capacity for Offshore Soft Foundations with Cyclic Load

The degradation strength of soils under cyclic loading is studied and a method for deter-mining the cyclic degradation strength with cyclic triaxial tests is given in the paper.Furthermore,a dum-my static method for estimating the undrained bearing capacity for offshore soft foundation under waveloads is developed.It can consider the effect of the difference of cyclic stress for different parts of the foun-dation on both the degradation strength of the foundation soil and the bearing capacity so that the esti-mated result can better reflect the real condition of foundation under cyclic loading.The method can be ap-plied to plane and space problem.     

Dynamic Analysis of A 5-MW Tripod Offshore Wind Turbine by Considering Fluid–Structure Interaction

Fixed offshore wind turbines usually have large underwater supporting structures.The fluid influences the dynamic characteristics of the structure system.The dynamic model of a 5-MW tripod offshore wind turbine considering the pile–soil system and fluid structure interaction(FSI) is established,and the structural modes in air and in water are obtained by use of ANSYS.By comparing low-order natural frequencies and mode shapes,the influence of sea water on the free vibration characteristics of offshore wind turbine is analyzed.On basis of the above work,seismic responses under excitation by El-Centro waves are calculated by the time-history analysis method.The results reveal that the dynamic responses such as the lateral displacement of the foundation and the section bending moment of the tubular piles increase substantially under the influence of the added-mass and hydrodynamic pressure of sea water.The method and conclusions presented in this paper can provide a theoretical reference for structure design and analysis of offshore wind turbines fixed in deep seawater.     

海床表层软土对宽浅式筒型基础承载特性影响研究

近海海床表层多为软黏土或淤泥质土,为探究海床表层软土对海上风电宽浅式筒型基础承载特性的影响,以中国广东某海域风电场为背景,通过有限元分析的方法,研究竖向、水平、弯矩荷载作用下软土层厚度和土体强度对基础极限承载力、破坏模式以及筒基土压力分布的影响。研究结果表明:当软土层厚度小于H/2(H为筒裙高度)时,单向荷载作用下宽浅式筒型基础极限承载力随软土层厚度的增加呈线性减小的趋势;当软土层厚度大于H/2后,承载力降低速率逐渐增大。表层软土的存在,使得塑性区范围缩小,软土层内土体塑性破坏更加明显。竖向荷载作用下,随软土层厚度的增大,筒顶承载先减小后增大,筒内侧摩阻力先增大后减小;水平荷载和弯矩作用下,筒侧被动土压力的降低是引起软土覆盖地基中基础承载能力降低的主要因素。     

Calculation and analysis of negative skin of monopile applied for offshore wind turbine

Monopiles are considered to be as a kind of viable foundation types for offshore wind turbines. The effect of negative skin friction on pile foundation is always an important problem. There are very important theoretical and practical significance to study the distribution law of negative skin friction and the calculation method. Based on the special stratum, the stress and strain of the monopile and soil are simplified, and the improved Kezdi’s double-broken-line model is adopted. The analytical solution of negative skin friction of monopile is deduced according to the degree of skin friction. An engineering case was analyzed by the method, and the calculated results agree well with the measured data. The calculation method proposed can accurately describe the range of the monopile skin frictional distribution and the position of the neutral point, and it is simple and convenient to calculate, that is also a feasible method for calculating the negative skin friction of monopile of offshore wind turbines in practical engineering.     

Centrifuge modeling of single pile response due to lateral cyclic loading in kaolin clay

In offshore engineering, pile foundations are commonly constructed in marine deposits to support various structures such as offshore platforms. These piles are subjected to lateral cyclic loading due to wind, wave action, and drag load from ships. In this paper, centrifuge model tests are conducted to investigate the response of the existing single piles due to lateral cyclic loading. The cyclic loading was simulated by a hydraulic actuator. It is found that the residual lateral movement and bending strain are induced in the existing pile after each loading–unloading cycle. This is because plastic deformation is induced in the soil surrounding the existing pile during each loading–unloading cycle. By increasing the applied loads during cyclic loading–unloading process, the lateral movements and bending strains induced in the pile head increase simultaneously. As the cyclic loading varies from 10 to 50 kN, the residual pile head movement increases from 40 to 154?mm, and the residual bending strain of the existing pile varies from 100 to 260 με. The ratio of residual to the maximum pile head movements varies from 0.17 to 0.22, while the ratio of residual to the maximum bending strains is in a range of 0.12–0.55.     

Bearing capacity of offshore umbrella suction anchor foundation in silty soil under varying loading modes

Considering the current disadvantages of present offshore wind turbine foundations, a novel anchor foundation with skirt and branches is proposed, called offshore umbrella suction anchor foundation (USAF). A series of experiments and numerical simulations were performed to explore the bearing capacity of the USAF under various kinds of loading modes. The bearing characteristics and the anchor–soil interactions are described in detail for horizontal static loading, horizontal cyclic loading, and an antidrawing (pullout) test in silty soil. In the static loading test, the load–deflection of the anchor under step loading was analyzed and the normalized curve of the load–deflection was obtained to determine the ultimate horizontal bearing capacity of the anchor under normal working conditions. Under horizontal cyclic loading, the relationship between the plastic cumulative deformation and cyclic number was determined. In addition, the responses of USAF were investigated for a low wave frequency and storm surges. In the drawing test, it was found that a “segmentation phenomenon” occurred during the test. Moreover, a method to identify the maximum antidrawing load of USAF was provided based on dynamic mechanics. The numerical results show that the use of anchor branches and skirt can enhance the bearing performance of USAF to a certain degree. However, the anchor branch has a slight positive influence on the bearing performance improvement. The USAF is not only similar to a stiff short pile, but a rotation occurs. The failure envelope under composite loading (V-M) was obtained and the changes associated with changes in the aspect ratio of the internal compartment were clarified.     

Evaluation of cyclic and monotonic loading behavior of bucket foundations used for offshore wind turbines

Suction caissons are considered as an alternative foundation solution for offshore wind turbines. In the present study, three-dimensional finite element (FE) analyses are performed to assess the behavior of a bucket foundation and soil supporting the bucket under cyclic and monotonic loading conditions. A parametric study is also performed for a wide range of bucket geometries and two different soil densities. The results indicate that bucket geometry and soil properties significantly affect the foundation response due to cyclic loading conditions. The bucket with the smallest geometry installed in medium dense soil exhibits the lowest stiffness in initial loading and then with the progress of cyclic loads experiences lower stiffness compared to the caissons with larger geometries. The sensitivity of the foundation response to the soil density is higher than its geometry. The bucket under the lowest vertical load experiences the lowest stiffness in both virgin loading and during the progress of cyclic loads. The highest soil displacement is observed near the lid at the interior of the bucket. Stresses caused by cyclic loading belong to certain ranges. Additionally, increases in the skirt length result in increases in the stress ranges and shift the range to the right side. With respect to the monotonic loading conditions, normalized diagrams are proposed that can be used for the preliminary design of suction bucket foundations.     

Drainage conditions around monopiles in sand

Large diameter monopiles are typical foundation solutions for offshore wind turbines. In design of the monopile foundations in sand, it is necessary to understand the drainage conditions of the foundation soil under the design loading conditions as the soil performance (strength and stiffness) is highly dependent on the drainage conditions. This paper presents a numerical investigation into this issue, with a purpose to develop a simple design criterion for assessing the soil drainage conditions around a monopile in sand. It is found that for typical monopile foundations in sand, the drainage condition during a single load cycle is generally expected to be undrained. However, the current state-of-practice uses p-y springs derived for drained soil responses for monopile design. The impact of this discrepancy on monopile foundation design was evaluated and found to be insignificant due to the relatively low level of loading as compared to the capacity of the soil.     

海上风机吸力基础的水平受荷研究综述

吸力基础具有施工速度快、安装过程中受海况天气影响小且易于回收重复利用等优点,被广泛应用于海洋工程。当吸力基础作为海上风电塔架的基础时,常常承受较大的水平荷载,因此其水平承载力是设计的主控因素。介绍了海上风机基础的设计要求,分析了影响基础水平承载性状的因素,总结了吸力基础受水平单调荷载、水平循环荷载和不同荷载组合三个方面的研究现状。讨论了水平荷载的大小、水平加载的高度(偏心率)、循环荷载的频率、循环荷载的次数、循环荷载的幅值、循环荷载的方向性、竖向荷载对吸力基础水平承载性状的影响,考虑了水平荷载的非共线性,指出了目前研究的不足,明确了吸力基础水平承载性状进一步研究的方向,提出了供工程实践参考的建议。