浅海海底管线检测艇操纵性和运动仿真研究

研究了用于维护和检修中国渤海海域输油管道的浅海管道检测艇的操纵性和运动仿真,提出了浅海海底管道检测艇的水动力学方程。为了更好地了解在配置上与一般潜器不同的浅海海底管线检测艇的动力学性能,通过水动力系数分析,研究了浅海海底管线检测艇的操纵性。最后根据运动方程建立了仿真系统,并通过仿真试验结果验证了仿真试验平台的可行性和可靠性。     

Motion Analysis and Trials of the Deep Sea Hybrid Underwater Glider Petrel-II

A hybrid underwater glider Petrel-II has been developed and field tested. It is equipped with an active buoyancy unit and a compact propeller unit. Its working modes have been expanded to buoyancy driven gliding and propeller driven level-flight, which can make the glider work in strong currents, as well as many other complicated ocean environments. Its maximal gliding speed reaches 1 knot and the propelling speed is up to 3 knots. In this paper, a 3D dynamic model of Petrel-II is derived using linear momentum and angular momentum equations. According to the dynamic model, the spiral motion in the underwater space is simulated for the gliding mode. Similarly the cycle motion on water surface and the depth-keeping motion underwater are simulated for the level-flight mode. These simulations are important to the performance analysis and parameter optimization for the Petrel-II underwater glider. The simulation results show a good agreement with field trials.     

Dynamic modeling and motion simulation for a winged hybrid-driven underwater glider

PETREL,a winged hybrid-driven underwater glider is a novel and practical marine survey platform which combines the features of legacy underwater glider and conventional AUV (autonomous underwater vehicle).It can be treated as a multi-rigid-body system with a floating base and a particular hydrodynamic profile.In this paper,theorems on linear and angular momentum are used to establish the dynamic equations of motion of each rigid body and the effect of translational and rotational motion of internal masses on the attitude control are taken into consideration.In addition,due to the unique external shape with fixed wings and deflectable rudders and the dual-drive operation in thrust and glide modes,the approaches of building dynamic model of conventional AUV and hydrodynamic model of submarine are introduced,and the tailored dynamic equations of the hybrid glider are formulated.Moreover,the behaviors of motion in glide and thrust operation are analyzed based on the simulation and the feasibility of the dynamic model is validated by data from lake field trials.     

Dynamic Modeling and Three-Dimensional Motion Analysis of Underwater Gliders

For Cconsideration ofing both the eccentric rotatable rigid body and the translational rigid body, the dynamic model of the underwater glider is derived. Dynamical behaviors are also studied based on the model and can be used as the guidance to underwater gliders design. Gibbs function of the underwater glider system is derived first, and then the nonlinear dynamic model is obtained by use of Apell Equations. The relationships between dynamical behaviors and design parameters are studied by solving the dynamic model. The spiral motion, swerving motion in three dimensions and the saw-tooth motion of the underwater glider in vertical plane are studied. Lake trials are carried out to validate the dynamic model.     

Motion Analysis and Trials of the Deep Sea Hybrid Underwater Glider Petrel-Ⅱ

A hybrid underwater glider Petrel-II has been developed and field tested. It is equipped with an active buoyancy unit and a compact propeller unit. Its working modes have been expanded to buoyancy driven gliding and propeller driven level-flight, which can make the glider work in strong currents, as well as many other complicated ocean environments. Its maximal gliding speed reaches 1 knot and the propelling speed is up to 3 knots. In this paper, a 3D dynamic model of Petrel-II is derived using linear momentum and angular momentum equations. According to the dynamic model, the spiral motion in the underwater space is simulated for the gliding mode. Similarly the cycle motion on water surface and the depth-keeping motion underwater are simulated for the level-flight mode. These simulations are important to the performance analysis and parameter optimization for the Petrel-II underwater glider.The simulation results show a good agreement with field trials.     

海底管线检修潜水器垂直面控制及自航模试验

论述了纵倾控制律设计及自航模试验。首先选择一系列深度,对同一深度采用频域校正法单独设计控制律,使之对不同的速度和漂角具有足够的稳态精度和抗干扰性,这些控制律被集成统一为纵倾控制器,并根据潜深变化进行切换,对于其它深度采用同样的方法设计。控制器首先通过计算机仿真,然后进行自航模试验验证。设计的纵倾控制系统同时在其他试验项目中(水下管线跟踪和动力定位)发挥了重要的作用。     

Numerical simulation of PMM tests for a ship in close proximity to sidewall and maneuvering stability analysis

As the maneuverability of a ship navigating close to a bank is influenced by the sidewall, the assessment of ship maneuvering stability is important. The hydrodynamic derivatives measured by the planar motion mechanism (PMM) test provide a way to predict the change of ship maneuverability. This paper presents a numerical simulation of PMM model tests with variant distances to a vertical bank by using unsteady RANS equations. A hybrid dynamic mesh technique is developed to realize the mesh configuration and remeshing of dynamic PMM tests when the ship is close to the bank. The proposed method is validated by comparing numerical results with results of PMM tests in a circulating water channel. The first-order hydrodynamic derivatives of the ship are analyzed from the time history of lateral force and yaw moment according to the multiple-run simulating procedure and the variations of hydrodynamic derivatives with the ship-sidewall distance are given. The straight line stability and directional stability are also discussed and stable or unstable zone of proportional-derivative (PD) controller parameters for directional stability is shown, which can be a reference for course keeping operation when sailing near a bank.     

A hydrodynamic model of a two-part underwater towed system

A three-dimensional model of a two-part underwater towed system is studied. In the model, the governing equations of cables are established based on the Ablow and Schechter method. The boundary conditions for the two-part underwater towed system are derived. The six-degrees-of-freedom equations of motion for submarine simulations are adopted to predict the hydrodynamic performance of a towed vehicle. The established governing equations for the system are then solved using a central finite difference method. In this paper several algorithms are used to solve this special form of finite difference equations. The results in this paper indicate that the two-part underwater towed system improves the dynamic behavior of the towed vehicle and is an easy way to decouple the towing ship motion from the towed vehicle. Because the model uses an implicit time integration, it is stable for large time steps and is an effective algorithm for simulation of a large-scale underwater towed system.     

主动式声纳列阵拖曳系统姿态数值计算

主动式声纳列阵拖曳系统是用于探测潜艇的新型声纳系统，为了准确探测潜艇的位置，必须首先预报声纳列阵的瓷态，本文通过对其三维力学模型的分析，得到该系统的运动微分方程，其中缆索的力学方程是基于Ablow和Milinazzo的模型，而对于拖体则运用六自由度空间运动方程模拟，结合边界条件，用有限差分法求解，通过对拖船的不同运动状态如匀速，变速和回转的计算，证明本文的方法对于预报声纳列阵的姿态是有效的。     

水下仿生扑翼机器人的发展现状综述

参照蝠鲼等鱼类游动方式所研制的水下仿生扑翼机器人具有效率高、机动性强、负载能力大等多方面优势。由于其广阔的应用前景,水下仿生扑翼机器人已逐步成为水下航行器领域的研究热点。本文系统地将蝠鲼的生物学特性、机器人的结构设计、动力学模型、单体运动控制、集群运动控制以及实验研究等方面的国内外研究进展进行了总结和梳理。已有的研究表明：水下仿生扑翼机器人正在朝着软体化、集群化、 高机动等方向发展,新兴的水下仿生扑翼机器人及仿生集群能够更加精确的模拟真实生物的游动姿态,并开展相关任务。当下的研究为水下仿生扑翼机器人性能的进一步优化与提升奠定了坚实的理论与实践基础。     

深海垂直吊放缆索系统固有频率和母船临界运动幅值快速计算方法

探索一种可描述缆索系统垂向吊放动力学行为的解析模型.给出它的自封闭方程、固有频率和简谐运动表达式,确定了母船和中际站之间的运动和张力传递函数,模拟结果能很好地符合实验估计值.导出沿着缆索的张力表达式,可用来预测缆索松驰和突变载荷的发生.     

Hydrodynamic and dynamic analysis to determine the directional stability of an underwater vehicle near a free surface

A theoretical methodology to determine the open-loop directional stability of a near-surface underwater vehicle is presented. It involves a solution of coupled sway and yaw equations of motion in a manner similar to that carried out for surface ships. The stability derivatives are obtained numerically through simulation of motions corresponding to planar motion mechanism (PMM) model tests. For the numerical simulation, a boundary-integral method based on the mixed Lagrangian-Eulerian formulation is developed. The free-surface effect on the vehicle stability is determined by comparing the results with that obtained for vehicle motion in infinite fluid. The methodology was used to determine the stability of the Florida Atlantic University’s Ocean EXplorer (OEX) AUV. The presence of the free surface, through radiation damping, is found to suppress unsteady oscillations and thereby enhance the directional stability of the vehicle. With effects of free surface, forward speed, location and geometry of rudders, location of the center of gravity etc. all being significant factors affecting stability, a general conclusion cannot be drawn on their combined effect on the vehicle stability. The present computational methodology is therefore a useful tool to determine an underwater vehicle’s stability for a given configuration and thus the viability of an intended mission a priori.     

Dynamic Modeling and Investigation of Maneuver Characteristics of A Deep-Sea Manned Submarine Vehicle

A deep-sea Manned Submarine Vehicle (MSV) is usually required to move at a low forward speed and a low rotational speed when it executes investigation tasks. In this condition, the motion is in large drift angles, and the maneuverability hydrodynamic forces cannot be expressed properly in the conventional mathematical model of submersible motion. In this paper, firstly, a general equation of MSV with six-freedom motion is presented, and the numerical simulation of descent/ascent motion and helix motion is c...     

基于多体分析的浅水FPSO和水下软钢臂系泊系统运动特性研究

基于多体动力分析方法进行FPSO和水下软钢臂系泊系统的运动特性研究。相较于非线性弹簧模拟软钢臂系泊系统或者其他近似模拟方法,多体分析方法可以充分考虑系泊系统具体结构形式及其动力项对FPSO运动性能的影响,更好的预报系统运动响应和系泊力。本文将FPSO和水下钢臂结构模拟成2个具有6自由度的独立结构,两者用系泊链组进行连接。基于三维势流理论应用汇源分布法,首先在频域内进行FPSO的水动力参数分析,进而在时域内对系统进行耦合动力分析。本文重点讨论系泊系统黏性力和二阶波浪力对系统响应的影响,计算结果发现系泊系统黏性力对系泊力有一定影响,而在浅水条件下二阶波浪力的计算对准确预报系统运动及系泊力非常重要。     

水下非均匀拖缆稳态动力学分析

水下拖缆物理参数不均匀会影响拖缆的动力特性,研究非均匀拖缆的参数变化对拖缆动力特性的影响有一定的工程实际意义。建立了拖曳系统运动的三维数学模型,推导出了水下非均匀拖缆的稳态运动控制方程,在首尾两端加上相应的定解条件,直接求得或使用嵌套二分法求得非均匀拖缆在端点的初始值,进而求解稳态动力学方程。借助文献中的拖缆—海底拖车系统算例,通过计算结果的对比,验证了数学模型及计算方法的正确性。通过四阶龙格库塔法进行数值仿真计算,得到了稳态解,分析了非均匀拖缆自身物理参数变化对缆绳系统稳态运动的影响。结果表明,非均匀拖缆的切向阻力系数、法向阻力系数、直径和密度变化会影响稳态缆形和张力分布,影响的程度各不相同。最后给出了两个尾拖船系统非均匀拖缆的稳态运动算例。     

Control performance in the horizontal plane of a fish robot withmechanical pectoral fins

The mechanism of locomotion of aquatic animals can provide us with new insight into the maneuverability and stabilization of underwater robots. This paper focuses on biomimesis in the maneuvering performance of aquatic animals to develop a new device for maneuvering underwater robots. In this paper, guidance and control in the horizontal plane of a fish robot equipped with a pair of two-motor-driven mechanical pectoral fins on both sides of the robot in water currents is presented. The fish robot demonstrates high performance in terms of maneuverability in such activities as lateral swimming. The use of fuzzy control enables the fish robot to perform rendezvous and docking with an underwater post in water currents     

Evaluation and reduction of the dynamic coupling between amanipulator and an underwater vehicle

The formulation of the dynamic coupling between a manipulator and an underwater vehicle is presented. Results from a simulation of a particular manipulator-vehicle configuration illustrate the nature and extent of the dynamic coupling. The modeling processes for the underwater vehicle and the manipulator are described with an evaluation of the simple hydrodynamic effects that can be incorporated in the dynamic equations of the manipulator. The equations are formulated for the combination of a 6-degrees-of-freedom vehicle and a 3-degrees-of-freedom manipulator. The effect of the manipulator motion, assuming perfect manipulator joint angle tracking, on the vehicle's position/orientation and consequently the manipulator end-effector position is investigated assuming no vehicle control. Slotine's sliding mode approach has been used to reduce the effect of the manipulator disturbances. This technique allows the expressions developed for the manipulator disturbances to be incorporated in the control law. Control of the vehicle's yaw angle, in this particular manipulator-vehicle configuration, has been determined to be the single most important factor in reducing the end-effector error variation. This is shown to be beneficial in the regulation of the vehicle's yaw angle and offers improved performance compared to a sliding mode controller that does not incorporate the manipulator disturbances. This technique also demonstrates superior performance and insensitivity to parameter variations compared to a fixed-gain controller     

Experimental investigation on a two-part underwater towed system

An experimental set-up is developed and proved to be effective for laboratory study of an underwater towed system. The experimental technique gives a practical method for monitoring the kinematic and dynamic performance of an underwater towed system in a ship towing tank. Both the theoretical and experimental results in the investigation indicate that the hydrodynamic response of a towed vehicle to the wave induced motion of a towing ship can be significantly reduced by applying a two-part tow method. A comparison of the numerical and experimental results in the investigation demonstrates that the numerical simulation results are close to the experimental data, overall agreement between experimental and theoretical results is satisfactory. The results qualitatively verify the mathematical model of a two-part underwater towed system proposed by Wu and Chwang [Wu, J., Chwang, A.T., 2000. A hydrodynamic model of a two-part underwater towed system. Ocean Engineering 27 (5), 455–472].     

Mine avoidance techniques for underwater vehicles

It is shown that by implementing certain mine avoidance techniques, an underwater vehicle equipped with an obstacle avoidance sonar (OAS) and a navigation system can safely navigate an unknown minefield. The mine avoidance techniques take into account the physical limitations of the sonar and the navigation system, the maneuverability constraints on the underwater vehicle, and the required safe standoff distance from all mines. Extensive computer simulations have verified the mine avoidance capability in more than 50 different minefields. In all 50 simulations the vehicle reached a predetermined end point and maintained at least the specified, minimum safe standoff distance from each mine. The simulation accurately models the major difficulties associated with the sonar, the navigation system, and the vehicle dynamics. The sonar model includes surface, bottom, and volume reverberation; thermal, ambient, and flow noises; actual receiver and projector beam patterns; and false alarms and missed detections. The navigation system model contains the effects of biases, random noises, and scale factor errors. The vehicle dynamic model simulates angular velocities and accelerations associated with underwater vehicles     

Study on Model Tests and Hydrodynamic Force Models for Free Spanning Submarine Pipelines Subjected to Earthquakes

A test rig is built to model the dynamic response of submarine pipelines with an underwater shaking table in the State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, China. Model tests are carried out to consider the effects of exciting wave directions and types. Based on the experimental results, two hydrodynamic force models derived from Morison equation and Wake model are presented respectively. By use of hydrodynamic force models suitable for free spanning submarine pipelines under earthquakes, discretized equations of motion are obtained and finite element models are established to analyze dynamic response of free spanning submarine pipeline subjected to multi-support seismic excitations. The comparison of numerical results with experimental results shows that the improved Morison and Wake hydrodynamic force models could satisfactorily predict dynamic response on the free spanning submarine pipelines subjected to earthquakes.