Geometry and structure of the Vitiaz Trench Lineament (SW Pacific)

Swath bathymetric, sonar imagery and seismic reflection data collected during the SOPACMAPS cruise Leg 3 over segments of the Vitiaz Trench Lineament and adjacent areas provide new insights on the geometry and the stuctural evolution of this seismically inactive lineament. The Vitiaz Trench Lineament, although largely unknown, is one of the most important tectonic feature in the SW Pacific because it separates the Cretaceous crust of the Pacific Plate to the north from the Cenozoic lithosphere of the North Fiji and Lau Basins to the south. The lineament is considered to be the convergent plate boundary between the Pacific and Australian Plates during midde to late Tertiary time when the Vitiaz Arc was a continuous east-facing are from the Tonga to the Solomon Islands before the development of the North Fiji and Lau Basins. Progressive reversal and cessation of subduction from west to east in the Late Miocene-Lower Plioene have been also proposed. However, precise structures and age of initiation and cessation of deformation along the Vitiaz Trench Lineament are unknown.The lineament consists of the Vitiaz Trench and three discontinuous and elongated troughs (Alexa, Rotuma and Horne Troughs) which connect the Vitiaz Trench to the northern end of the Tonga Trench. Our survey of the Alexa and Rotuma Troughs reveals that the lineament is composed of a series of WNW-ESE and ENE-WSW trending segments in front of large volcanic massifs belonging to the Melanesian Border Plateau, a WNW trending volcanic belt of seamounts and ridges on Pacific crust. The Plateau and Pacific plate lying immediately north of the lineament have been affected by intense normal faulting, collapse, and volcanism as evidenced by a series of tilted blocks, grabens, horsts and ridges trending N 120° to N100° and N60°–70°. This tectonism includes several normal faulting episodes, the latest being very recent and possibly still active. The trend of the fault scarps and volcanic ridges parallels the different segments of the Vitiaz Trench Lineament, suggesting that tectonics and volcanism are related to crustal motion along the lineament.Although the superficial observed features are mainly extensional, they are interpreted as the result of shortening along the Vitiaz Trench Lineament. The fabric north of the lineament would result from subduction-induced normal faulting on the outer wall of the trench and the zig-zag geometry of the Vitiaz Trench Lineament might be due to collision of large volcanic edifices of the Melanesian Border Plateau with the trench, provoking trench segmentation along left-lateral ENE-WSW trending transform zones. The newly acquired bathymetric and seismic data suggest that crustal motion (tectonism associated with volcanism) continued up to recent times along the Vitiaz Trench Lineament and was active during the development of the North Fiji Basin.     

Morphology and tectonics of the Yap Trench

We conducted swath bathymetry and gravity surveys the whole-length of the Yap Trench, lying on the southeastern boundary of the Philippine Sea Plate. These surveys provided a detailed morphology and substantial insight into the tectonics of this area subsequent the Caroline Ridge colliding with this trench. Horst and graben structures and other indications of normal faulting were observed in the sea-ward trench seafloor, suggesting bending of the subducting oceanic plate. Major two slope breaks were commonly observed in the arc-ward trench slope. The origin of these slope breaks is thought to be thrust faults and lithological boundaries. No flat lying layered sediments were found in the trench axis. These morphological characteristics suggest that the trench is tectonically active and that subduction is presently occurring. Negative peaks of Bouguer anomalies were observed over the arc-ward trench slope. This indicates that the crust is thickest beneath the arc-ward trench slope because the crustal layers on the convergent two plates overlap. Bouguer gravity anomalies over the northern portion of the Yap Arc are positive. These gravity signals show that the Yap Arc is uplifted by dynamic force, even though dense crustal layers underlie the arc. This overlying high density arc possibly forces the trench to have great water depths of nearly 9000 m. We propose a tectonic evolution of the trench. Subduction along the Yap Trench has continued with very slow rates of convergence, although the cessation of volcanism at the Yap Arc was contemporaneous with collision of the Caroline Ridge. The Yap Trench migrated westward with respect to the Philippine Sea Plate after collision, then consumption of the volcanic arc crust occurred, caused by tectonic erosion, and the distance between the arc and the trench consequently narrowed. Lower crustal sections of the Philippine Sea Plate were exposed on the arc-ward trench slope by overthrusting. Intense shearing caused deformation of the accumulated rocks, resulting in their metamorphism in the Yap Arc.     

A seismic reflection study of the External Calabrian Arc in the northern Ionian Sea (eastern Mediterranean)

The External Calabrian Arc is located off the convex side of the Calabro-Peloritanian Arc in the northern Ionian Sea. A systematic reflection seismic survey indicates that it is made of different structural elements whose characters seem consistent with an active accretionary margin. The main structures are the Crotone-Spartivento slope (comparable to an inner trench slope) and the intermediate depressions (comparable to a trench area). Internal to these elements, the Crotone-Spartivento basin may represent a fore-arc basin. This partly outcrops in Calabria and its structure suggests that the accretionary margin developed at least since middle-upper Miocene.Subduction processes do not affect a true oceanic crust, because of the great thickness of sediments covering the whole eastern Mediterranean. Hence some peculiar features occur in the system. as the cobblestone topography, or are lacking, as a typical and continuous trench zone.In the areas with cobblestone topography we distinguish a Calabrian Ridge sensu stricto from a Calabrian Ridge sensu lato. The former is a N-S trending swell, external to the supposed trench zone, interpreted as a sedimentary outer-arc ridge produced by rather surficial tectonic accumulation of sediments further chaoticized by gravitative mechanisms. The Ridge s.l. is a very wide area with low relief and little or no seismic penetration. Tectonization seems gentler than in the Ridge s.s. and structural axes seem to possess different orientations. These areas are interpreted as due to a widespread surficial chaoticization above presumed decollement layers occurring within the sedimentary column of the Ionian bathyal plain.The pattern of deformations of the Calabrian Ridge seems consistent with the Calabro-Peloritanian Arc actively overriding the eastern Mediterranean, with a resultant direction of movement essentially towards the East.     

Compressive tectonism along the eastern margin of Malaita Island (Solomon Islands)

New bathymetric and geophysical data were collected in the region east of the island of Malaita during the SOPACMAPS II cruise of the French research vessel L'ATALANTE. This region, part of the Malaita Anticlinorium was interpreted as a piece of oceanic crust from the Ontong Java Plateau obducted over the old Solomon Islands arc during collision between the Pacific and Australian plates. It has been generally accepted that convergent motion between the Australia and Pacific plates since the Late Miocene was absorbed exclusively along the San Cristobal trench, southwest of the Solomon Islands Arc.Bathymetry, imagery, and geophysical data (magnetism, gravity, seismic) acquired during the SOPACMAPS II survey allow us to classify the successive parallel ridges mapped within the region as being recent volcanic, oceanic crust, or deformed sedimentary ridges.Seismic profiling provides evidence of successive compressive events along the Malaita margin caused by the relative motion between the Solomon Islands and the Pacific plate. The main phase of convergence probably occurred during Oligocene-early Miocene time, but some relative motion between the two domains are still being absorbed along the East Malaita boundary. The existence of active faulting in the sedimentary cover throughout the region and the present-day deformation of the outer sedimentary ridge is a good illustration of this phenomenon.     

Petrogenesis and tectonic implication of lavas from the Yap Trench,western Pacific

We present major and trace element data of lava recovered from the northern Yap Trench in the western Pacific and discuss their petrogenesis and tectonic implications within the framework of interactions between the Caroline Ridge and Yap Trench. Rocks were collected from both landward and seaward trench slopes and exhibited geochemical characteristics similar to backarc basin basalt (BABB) and mid-ocean ridge basalt (MORB), including high Fe content, tholeiitic affinity, high TiO2 value at a given FeOT/MgO ratio, Ti/V ratio between 20 and 50, low Ba/Nb ratio and Th/Nb ratio, and trace element patterns commonly displayed by BABB and MORB, which are distinct from arc lava. These rocks seem to have been generated during mantle upwelling and decompression melting at a spreading center. However, compared with typical forearc lava produced by seafloor spreading in the Mariana forearc region, such as the early Eocene forearc basalts and late Neogene forearc lava in the southernmost Mariana Trench, the Yap Trench lava is derived from a more fertile mantle and feature a more minor subduction component; thus, they cannot be the products of forearc mantle decompression melting. We suggest that the landward slope lava represents backarc basin crust that was overthrust onto the forearc lithosphere during the collision of the Caroline Ridge with the Yap Trench (20–25 Ma), which played a key role in the evolution of the Yap subduction system. Moreover, the seaward slope lava represents the subduction plate crust that accreted onto the deep trench during the collision. This collision event resulted in the cessation of Yap Arc magmatism; thus, the Yap Trench volcanic rocks (<25 Ma) previously suggested to be arc magma products may actually represent the nascent island arc lava with a lower subduction component than in the mature Mariana Arc lava.     

Tectonic control over topography and channel sedimentation across the forearc slope of the southern Kurile Trench

A high-resolution seismic survey covering more than 2,000 km² has revealed the processes responsible for the slope morphology and channel sedimentation across the forearc slope-basin of the Kurile Arc–NE Japan Arc collision zone, offshore from Tokachi (Hokkaido, Japan). The dominant slope contours parallel the trench but, in the middle and lower reaches of the southern slope, contours are convex-shaped with an offshore trend. This sector of the slope is traversed diagonally by the Hiroo submarine channel. The offshore-trending convex contours and the channel course have developed through the interplay of tectonic and sedimentary processes, including the development of anticlines, anticline-induced lobe sedimentation and channel avulsion. In its upper reaches, the channel is restricted by a topographic low associated with NNW–SSE-trending anticlines which developed within the upper and middle slope sectors during late Miocene uplift. The uplift timing and trend of these anticlines indicate that they resulted from collision, the channel sedimentology and slope morphology of the middle and lower slopes having been influenced by Pliocene uplift of NE–SW-trending anticlines. The trends of these anticlines parallel those of the Kurile Trench. The Pliocene and early Pleistocene strata of the middle and lower slopes consist of ponded lobe sediments deposited along the palaeo-Hiroo submarine channel on the landward side of the anticlines. As a lobe pile accumulated, the channel thalweg shifted to the north of the stack, allowing the channel to bypass the topographic high formed by the growing stack. Thick levee deposits built up along the channel course during the late Pleistocene and Holocene. These levees, along with the Pliocene and early Pleistocene lobes, are reflected in the present-day sigmoid-shaped, convex offshore-trending contours. Thus, the interplay of subduction- and collision-related anticlines, tectonic-related channel ponding, and avulsion has contributed to the slope morphology of the southern Kurile Trench.     

Okinawa Trough genesis: structure and evolution of a backarc basin developed in a continent

The Okinawa marginal basin was opened by crustal extension into the Asian continent, north of the Taiwan collision zone. It is located behind the Ryukyu Trench subduction zone and the Ryukyu active volcanic arc. If we except the Andaman Sea, the Okinawa Trough is the only example of marginal backarc basin type, opened into a continent at an early stage of evolution. Active rifting and spreading can be observed. Synthesis of siesmic reflection, seismic refraction, drilling, dredging and geological field data has resulted in interpretative geological cross sections and a structural map of the Ryukyu-Okinawa area. The main conclusions of the reconstruction of this backarc basin/volcanic arc evolution are. (1) Backarc rifting was initiated in the volcanic arc and propagated along it during the Neogene. It is still active at both ends of the basin. Remnants of volcanic arc are found on the continental side of the basin. (2) There was synchronism between opening and subsidence of the Okinawa Trough and tilting and subsidence of the forearc terrace. The late Miocene erosional surface is now 4000 m below sea-level in the forearc terrace, above the trench slope. Retreat and subsidence of the Ryukyu trench line relative to the Asian continental plate, could be one of the causes of tilting of the forearc and extension in the backarc area. (3) A major phase of crustal spreading occurred in Pliocene times 1.9 My ago in the south and central Okinawa Trough. (4) En échelon rifting and spreading structures of the central axes of the Okinawa Trough are oblique to the general trend of the arc and trench. The Ryukyu arc sub-plate cannot be considered as a rigid plate. Rotation of 45° to 50° of the southern Ryukyu arc, since the late Miocene, is inferred. The timing and kinematic evolution of the Taiwan collision and the south Okinawa Trough opening suggest a connection between these two events. The indentation process due to the collision of the north Luzon Arc with the China margin could have provoked: lateral extrusion; clockwise rotation (45° to 50° according to palaeomagnetic data) and buckling of the south Ryukyu non-volcanic arc; tension in the weak crustal zone constituted by the south Ryukyu volcanic arc and opening of the south Okinawa Trough. Similar lateral extrusions, rotations, buckling and tensional gaps have been observed in indentation experiments. Additional phenomena such as: thermal convection, retreating trench model or anchored slab model could maintain extension in the backarc basin. Such a hypothetical collision-lateral backarc opening model could explain the initiation of opening of backarc basins such as the Mariana Trough, Bonin Trough, Parece Vela — Shikoku Basin and Sea of Japan. A new late Cenozoic palaeogeographic evolution model of the Philippine Sea plate and surrounding areas is proposed.     

Structure of the Sunda Trench lower slope off sumatra from multichannel seismic reflection data

Multichannel seismic reflection profiles across the Sunda Trench slope off central Sumatra reveal details of subduction zone structure. Normal faults formed on the outer ridge of the trench offset deep strate and the oceanic crust, but die out upsection under the trench sediments. At the base of the inner trench slope, shallow reflectors are tilted seaward, while deeper reflectors dip landward parallel to the underlying oceanic crustal reflector. Intermediate depth reflectors can be traced landward through a seaward-dipping monocline. We interpret this fold as the shallow expression of a landward-dipping thrust fault at depth. Landward of this flexure, relatively undeformed strata have been stripped off the oceanic plate, uplifted 700 meters, and accreted to the base of the slope. The oceanic crust is not involved in the deformation at the toe of the slope, and it can be observed dipping landward about 25 km under the toe of the accretionary prism.The middle portion of the trench slope is underlain by deformed accreted strata. Shallow reflectors define anticlinal structures, but coherent deep reflectors are lacking. Reflectors 45 to 55 km landward of the base of the slope dip 4°-5° landward beneath a steep slope, suggesting structural imbrication.A significant sediment apron is absent from the trench slope. Instead, slope basins are developed in 375–1500 m water depths, with an especially large one at about 1500 m water depth that is filled with more than 1.1 seconds of relatively undeformed sediments. The seaward flank of the basin has recently been uplifted, as indicated by shallow landward-dipping reflectors. Earlier periods of uplift also appear to have coincided with sedimentation in this basin, as indicated by numerous angular unconformities in the basin strata.Contribution of the Scripps Institution of Oceanography, new series.     

Fault patterns at outer trench walls

Profiles across subduction-related trenches commonly show normal faulting of the outer trench wall. Such faulting is generally parallel or sub-parallel to the trench and is ascribed to tension in the upper part of the oceanic plate as it is bent into the subduction zone. A number of authors have noted that outer trench wall faulting may involve re-activation of the oceanic spreading fabric of the subducting plate, even when the trend of this fabric is noticeably oblique to the extensional stress direction. However, one previous review of outer trench wall fault patterns questioned the occurrence of a consistent link between fault orientation and such controlling factors. This latter study predated the widespread availability of swath bathymetry and longrange sidescan sonar data over trenches. Based only on profile data, it was unable to analyse fault patterns with the accuracy now possible. This paper therefore re-examines the relationship between outer trench wall faulting and the structure of the subduction zone and subducting plate using GLORIA and Seabeam swath mapping data from several locations around the Pacific and Indian Oceans. The principal conclusions is that the trend of outer trench wall faults is almost always controlled by either the subducting slab strike or by the inherited oceanic spreading fabric in the subducting plate. The latter control operates when the spreading fabric is oblique to the subducting slab strike by less than 25–30°; in all other cases the faults are parallel to slab strike (and parallel or sub-parallel to the trench). Where the angle between spreading fabric and slab strike is close to 30°, two fault trends may coexist; evidence from the Aleutian Trench indicates a gradual change from spreading fabric to slab strike control of fault trend as the angle between the two increases from 25 to 30°. The only observed exception to the above rule of fault control comes from the western Aleutian Trench, where outer trench wall faults are oblique to the slab strike, almost perpendicular to the spreading fabric, and parallel to the convergence direction. Re-orientation of the extensional stress direction due to right-lateral shear at this highly oblique plate boundary is the best explanation of this apparently anomalous observation.     

Rapid subsidence of the Kikai Seamount inferred from drowned Pleistocene coral limestone: Implication for subduction of the Amami Plateau,northern Philippine Sea

Carbonate rock cores drilled on the Kikai Seamount, northern Philippine Sea are examined for better understanding of tectonic history of the northern Philippine Sea. The Kikai Seamount, the summit of which is at 1960 m water depth, is an isolated high on the northwestern part of the Amami Plateau formed by subduction-related arc volcanism, and is situated close to the axis of the Ryukyu Trench in front of the Ryukyu Arc, SW Japan. The seamount is capped with shallow-water carbonates such as coral rudstone. Detailed examinations of lithology, larger foraminiferal assemblages, and Sr isotope composition reveal that the core material comprises Miocene carbonates unconformably overlain by Early Pleistocene carbonates. It indicates rapid subsidence of the Kikai Seamount since the Early Pleistocene. The most probable cause of rapid subsidence is collision and subduction of the Amami Plateau laden with the Kikai Seamount. The rapid subsidence may have started when the western corner of the plateau reached the Ryukyu Trench and began subduction beneath the Ryukyu Arc. The onset of the subsidence is likely to be controlled by a motion change in the Philippine Sea Plate. The latest change in subduction direction from north to northwestward into northwestward to west has been believed to have occurred at 1-2 Ma during latest Pliocene to Early Pleistocene time. The change of direction resulted in the shift from oblique into right-angle subduction of the plate beneath the Ryukyu Arc and also the onset of the collision and subduction of the Amami Plateau.     

The Trobriand Subduction System in the Western Solomon Sea

A south-dipping Subduction system which underlies the Trobriand Trough and 149° Embayment, on the southern margin of the Solomon Sea, is active or was recently active. Oceanic basement is overlain by 2.5 s, two-way travel time (TWTT), of sediment that shows at least two stages of deformation: early thrusts (inner wall) and normal faults (outer wall), and later normal faults that have elevated the outer trench margin. Thrust anticlines and slope basins are developed on the inner wall. The floor of the Solomon Sea Basin arches upward between the Trobriand Trough and the New Britain Trench to form isolated peaks and ridges in the east (152° Peaks) and an east-west Central Ridge in the west. Structures in the subduction system, and in the Solomon Sea Basin, plunge westward towards the point of collision with the New Britain Trench.     

沉积环境对雅浦海沟沉积颗粒物组成和分布的影响

通过对西太平洋雅浦海沟不同水深沉积物中总有机碳（TOC）、总氮（TN）、碳稳定同位素（δ13C）、粒度组成和比表面积（SSA）等参数的分析，探讨了雅浦海沟不同水深沉积颗粒物来源、分布及其影响因素的异同。结果表明，雅浦海沟沉积物TOC含量和δ13C平均值分别为（0.34%±0.14%）和（-20.8‰±0.7‰），其中海洋浮游植物、陆源土壤和维管植物来源有机碳（OC）的贡献分别为（70%±3%）、（22%±3%）和（8%±2%），且不同水深差异不大，海沟内沉积物的横向输运可能是深部沉积OC的重要输入途径。由于水深更深站位沉积颗粒物中具有更强的微生物活动和在水柱中更长的保留时间，导致其TOC和TN含量较低，但δ13C无明显差异。水深较浅站位TN含量、SSA、粒径组成和中值粒径等参数垂向变化波动较更深站位更为显著，表明海沟沟壁水深较浅处物源输入和沉积环境的不稳定。同时，由于低OC含量、低SSA以及高密度的海底火山喷出岩在海沟水深较浅的沟壁坡折处的广泛分布，导致该区域粒径组成与TOC含量无显著相关性，而较深站位中TOC含量与粉砂呈正相关，与砂和黏土含量呈负相关。整体而言，雅浦海沟沉积物中粉砂粒级颗粒物是OC的主要载体，而SSA是影响海沟沉积OC剖面分布的最重要因素。     

Submarine canyon development in the Izu-Bonin forearc: A SeaMARC II and seismic survey of Aoga Shima Canyon

SeaMARC II sidescan (imagery and bathymetry) and seismic data reveal the morphology, sedimentary processes, and structural controls on submarine canyon development in the central Izu-Bonin forearc, south of Japan. Canyons extend up to 150 km across the forearc from the trench-slope break to the active volcanic arc. The canyons are most deeply incised (1200–1700 m) into the gentle gradients (1–2°) upslope on the outer arc high (OAH) and lose bathymetric expression on the steep (6–18°) inner trench-slope. The drainage patterns indicate that canyons are formed by both headward erosion and downcutting. Headward erosion proceeds on two scales. Initially, pervasive small-scale mass wasting creates curvilinear channels and pinnate drainage patterns. Large-scale slumping, evidenced by abundant crescent-shaped scarps along the walls and tributaries of Aoga Shima Canyon, occurs only after a channel is present, and provides a mechanism for canyon branching. The largest slump has removed >16 km³ of sediment from an 85 km² area of seafloor bounded by scarps more than 200 m high and may be in the initial stages of forming a new canyon branch. The northern branch of Aoga Shima Canyon has eroded upslope to the flanks of the arc volcanoes allowing direct tapping of this volcaniclastic sediment source. Headward erosion of the southern branch is not as advanced but the canyon may capture sediments supplied by unconfined (non-channelized) mass flows.Oligocene forearc sedimentary processes were dominated by unconfined mass flows that created sub-parallel and continuous sedimentary sequences. Pervasive channel cut-and-fill is limited to the Neogene forearc sedimentary sequences which are characterized by migrating and unconformable seismic sequences. Extensive canyon formation permitting sediment bypassing of the forearc by canyon-confined mass flows began in the early Miocene after the basin was filled to the spill points of the OAH. Structural lows in the OAH determined the initial locus of canyon formation, and outcropping basement rocks have prevented canyon incision on the lower slope. A major jog in the canyon axis, linear tributaries, and a prominent sidescan lineament all trend NW-NNW, reflecting OAH basement influence on canyon morphology. This erosional fabric may reflect joint/fracture patterns in the sedimentary strata that follow the basement trends. Once the canyons have eroded down to more erosion-resistant levels, channel downcutting slows relative to lateral erosion of the canyon walls. This accounts for the change from a narrow canyon axis in the thickly sedimented forearc basin to a wider, more rugged canyon morphology near the OAH. About 9500 km³ of sediment has been eroded from the central, 200 km long, segment of the Izu-Bonin forearc by the formation of Aoga Shima, Myojin Sho and Sumisu Jima canyons. The volume of sediment presently residing in the adjacent trench, accretionary wedge, and lower slope terrace basin accounts for <25% of that eroded from the canyons alone. This implies that a large volume (>3500 km³ per 100 km of trench, ignoring sediments input via forearc bypassing) has been subducted beneath the toe of the trench slope and the small accretionary prism. Unless this sediment has been underplated beneath the forearc, it has recycled arc material into the mantle, possibly influencing the composition of arc volcanism.     

The Crustal Structure Character of East China Sea

This paper presents actuality of investigation and study of the crustal structure characters of East China Sea at home and abroad. Based on lots of investigation and study achievements and the difference of the crustal velocity structure from west to east, the East China Sea is divided into three parts - East China Sea shelf zone, Okinawa Trough zone and Ryukyu arc-trench zone. The East China Sea shelf zone mostly has three velocity layers, i.e., the sediment blanket layer （the velocity is 5.8-5.9 km/s）, the basement layer （the velocity is 6.0-6.3 km/s）, and the lower crustal layer （the velocity is 6.8-7.6 km/s）. So the East China Sea shelf zone belongs to the typical continental crust. The Okinawa Trough zone is located at the transitional belt between the continental crust and the oceanic crust. It still has the structural characters of the continental crust, and no formation of the oceanic crust, but the crust of the central trough has become to thinning down. The Ryukyu arc-trench zone belongs to the transitional type crust as a whole, but the ocean side of the trench already belongs to the oceanic crust. And the northwest Philippine Basin to the east of the Ryukyu Trench absolutely belongs to the typical oceanic crust.     

Controls on turbidite sand deposition during gravity-driven extension of a passive margin: examples from Miocene sediments in Block 4, Angola

In recent years, exploration of the Lower Congo Basin in Angola has focused on the Neogene turbidite sand play of the Malembo Formation. Gravity tectonics has played an important role during deposition of the Malembo Formation and has imparted a well-documented structural style to the post-rift sediments. An oceanward transition from thin-skinned extension through mobile salt and eventually to thin-skinned compressional structures characterises the post-rift sediments. There has been little discussion, however, regarding the influence of these structures on the deposition of the Malembo Formation turbidite sands. Block 4 lies at the southern margin of the Lower Congo Basin and is dominated by the thin-skinned extensional structural style. Using a multidisciplinary approach we trace the post-rift structural and stratigraphic evolution of this block to study the structural controls on Neogene turbidite sand deposition.In the Lower Congo Basin the transition from terrestrial rift basin to fully marine passive margin is recorded by late Aptian evaporites of the Loeme Formation. Extension of the overlying post-rift sequences has occurred where the Loeme Formation has been utilised as a detachment surface for extensional faults. Since the late Cretaceous, the passive margin sediments have moved down-slope on the Loeme detachment. This history of gravity-driven extension is recorded in the post-rift sediments of Block 4. Extension commenced in the Albian in the east of the block and migrated westwards with time. In the west, the extension occurred mainly in the Miocene and generated allochthonous fault blocks or “rafts”, separated by deep grabens. The Miocene extension occurred in two main phases with contrasting slip vectors; in the early Miocene the extension vector was to the west, switching to southwest-directed extension in the late Miocene. Early Miocene faults and half-grabens trend north–south whereas late Miocene structures trend northwest–southeast. The contrast in slip vectors between these two phases emphasises the differences in driving mechanisms: the early Miocene faulting was driven by basinward tilting of the passive margin, but gravity loading due to sedimentary progradation is considered the main driver for the late Miocene extension. The geological evolution of the late Miocene grabens is consistent with southwest-directed extension due to southwest progradation of the Congo fan.High-resolution biostratigraphic data identifies the turbidite sands in Block 4 as early Miocene (17.5–15.5 Ma) and late Miocene (10.5–5.5 Ma) in age. Deposition of these sands occurred during the two main phases of gravity-driven extension. Conditions of low sedimentation rates relative to high fault displacement rates were prevalent in the early Miocene. Seafloor depressions were generated in the hangingwalls of the main extensional faults, ultimately leading to capture of the turbidity currents. Lower Miocene turbidite sand bodies therefore trend north–south, parallel to the active faults. Cross-faults and relay ramps created local topographic highs capable of deflecting turbidite flows within the half grabens. Flow-stripping of turbidity currents across these features caused preferential deposition of sands across, and adjacent to, the highs. Turbidite sands deposited in the early part of the late Miocene were influenced by both the old north–south fault trends and by the new northwest–southeast fault trends. By latest Miocene times turbidite channels crosscut the active northwest–southeast-trending faults. These latest Miocene faults had limited potential to capture turbidity currents because the associated hangingwall grabens were rapidly filled as pro-delta sediments of the Congo fan prograded across the area from the northeast.     

Signs of continental rifting in the southwestern Japanese Island Arc

The southwestern margin of the Japan Arc evolved in the geodynamic regime of continental rifting during the Miocene–Pleistocene. This has been verified by broad manifestations of metasomatosis of mantle peridotites that underlie the lithosphere of the Japan Islands and by episodes of deep magmatism (kimberlites and melilitites) in the region. The high enrichment of deep melts in incompatible rare and rare earth elements is partially preserved in melts of regional basalts from smaller depths. In contrast, spreading basalts of the Sea of Japan and subduction basalts from the Nankai trench at the boundary with the Philippine Plate are extremely depleted in rare elements.     

Stratigraphy and formation conditions of the sedimentary cover in the Sea of Japan near the Bogorov Rise

The results of the complex study of the sedimentary cover (continuous seismic profiling and diatom analysis) in the northeastern part of the Sea of Japan, including the Bogorov Rise, the adjacent part of the Japan Basin, and the continental slope, are presented. Two varied-age complexes were distinguished in the sedimentary cover of Primorye’s continental slope, namely, the Middle Miocene and Late Miocene-Pleistocene; these complexes were formed in a stable tectonic environment with no significant vertical movements. The depression in the acoustic basement is located along the continental slope and it is divided from the Japan Basin by a group of volcanic structures, the most uplifted part of which forms the Bogorov Rise. The depression was formed, probably, before the Middle Miocene. In the Middle Miocene, the Bogorov Rise was already at the depths close to the modern ones. In the sedimentary cover near the Bogorov Rise, buried zones were found, which probably were channels for gas transportation in the pre-Pleistocene. Deformations of sediments that occurred in the beginning of the Pleistocene are established in the basin.     

Bathymetry of the Tonga Trench and Forearc: a map series

Four new bathymetric maps of the Tonga Trench and forearc between 14 °S and 27 °S display the important morphologic and structural features of this dynamic convergent margin. The maps document a number of important geologic features of the margin. Major normal faults and fault lineaments on the Tonga platform can be traced along and across the upper trench slope. Numerous submarine canyons incised in the landward slope of the trench mark the pathways of sediment transport from the platform to mid- and lower-slope basins. Discontinuities in the trench axis and changes in the morphology of the landward slope can be clearly documented and may be associated with the passage and subduction of the Louisville Ridge and other structures on the subducting Pacific Plate. Changes in the morphology of the forearc as convergence changes from normal in the south to highly-oblique in the north are clearly documented. The bathymetric compilations, gridded at 500- and 200-m resolutions and extending along 500 km of the landward trench slope and axis, provide complete coverage of the outer forearc from the latitude of the Louisville Ridge-Tonga Trench collision to the northern terminus of the Tonga Ridge. These maps should serve as a valuable reference for other sea-going programs in the region, particularly the Ocean Drilling Program (ODP) and the National Science Foundation MARGINS initiative.     

Seismic stratigraphy and structure of the Northland Plateau and the development of the Vening Meinesz transform margin,SW Pacific Ocean

The Northland Plateau and the Vening Meinesz “Fracture” Zone (VMFZ), separating southwest Pacific backarc basins from New Zealand Mesozoic crust, are investigated with new data. The 12–16 km thick Plateau comprises a volcanic outer plateau and an inner plateau sedimentary basin. The outer plateau has a positive magnetic anomaly like that of the Three Kings Ridge. A rift margin was found between the Three Kings Ridge and the South Fiji Basin. Beneath the inner plateau basin, is a thin body interpreted as allochthon and parautochthon, which probably includes basalt. The basin appears to have been created by Early Miocene mainly transtensive faulting, which closely followed obduction of the allochthon and was coeval with arc volcanism. VMFZ faulting was eventually concentrated along the edge of the continental shelf and upper slope. Consequently arc volcanoes in a chain dividing the inner and outer plateau are undeformed whereas volcanoes, in various stages of burial, within the basin and along the base of the upper slope are generally faulted. Deformed and flat-lying Lower Miocene volcanogenic sedimentary rocks are intimately associated with the volcanoes and the top of the allochthon; Middle Miocene to Recent units are, respectively, mildly deformed to flat-lying, calcareous and turbiditic. Many parts of the inner plateau basin were at or above sea level in the Early Miocene, apparently as isolated highs that later subsided differentially to 500–2,000 m below sea level. A mild, Middle Miocene compressive phase might correlate with events of the Reinga and Wanganella ridges to the west. Our results agree with both arc collision and arc unzipping regional kinematic models. We present a continental margin model that begins at the end of the obduction phase. Eastward rifting of the Norfolk Basin, orthogonal to the strike of the Norfolk and Three Kings ridges, caused the Northland Plateau to tear obliquely from the Reinga Ridge portion of the margin, initiating the inner plateau basin and the Cavalli core complex. Subsequent N115° extension and spreading parallel with the Cook Fracture Zone completed the southeastward translation of the Three Kings Ridge and Northland Plateau and further opened the inner plateau basin, leaving a complex dextral transform volcanic margin.     

北康盆地构造特征及其构造区划

北康盆地是位于南沙中部海城的新生代沉积盆地，新生代沉积盖层在盆地内广泛发育，根据地震反射特征及地震反射界面的区域对比，盆地基层可进一步划分为3个构造层。北康盆地西南边界发育延贾断裂，该断裂西起万安盆地，向东直于加里曼丹。从渐新世始，廷贾断裂先后经历了3次规模较大的构造活动。南沙海槽西北缘断裂位于北康盆地的东南边界，该断裂把北康盆地和南沙海槽盆地分隔开来。北康盆地内断裂主要有北东、北西和南北向三组，其中南北、北西向断层往往错断北东向断层。在详细讨论断层特征和沉积盖层布规律的基础上，对北康盆地的二级构造单元进行了划分。