THE RADIATIVE EFFECTS OF ANTHROPOGENIC AEROSOLS OVER CHINA AND THEIR SENSITIVITY TO SOURCE EMISSION

In this paper,the RIEMS 2.0 model,source emission in 2006 and 2010 are used to simulate the distributions and radiative effects of different anthropogenic aerosols over China.The comparison between the results forced by source emissions in 2006 and 2010 also reveals the sensitivity of the radiative effects to source emission.The results are shown as follows:(1) Compared with those in 2006,the annual average surface concentration of sulfate in 2010 decreased over central and eastern China with a range of-5 to 0 μg/m~3;the decrease of annual average aerosol optical depth of sulfate over East China varied from 0.04 to 0.08;the annual average surface concentrations of BC,OC and nitrate increased over central and eastern China with maximums of 10.90,11.52 and 12.50μg/m~3,respectively;the annual aerosol optical depths of BC,OC and nitrate increased over some areas of East China with extremes of 0.006,0.007 and 0.008,respectively.(2)For the regional average results in 2010,the radiative forcings of sulfate,BC,OC,nitrate and their total net radiative forcing at the top of the atmosphere over central and eastern China were-0.64,0.29,-0.41,-0.33 and-1.1 W/m~2,respectively.Compared with those in 2006,the radiative forcings of BC and OC in 2010 were both enhanced,while that of sulfate and the net radiative forcing were both weakened over East China mostly.(3)The reduction of the cooling effect of sulfate in 2010 produced a warmer surface air temperature over central and eastern China;the maximum value was 0.25 K.The cooling effect of nitrate was also slightly weakened.The warming effect of BC was enhanced over most of the areas in China,while the cooling effect of OC was enhanced over the similar area,particularly the area between Yangtze and Huanghe Rivers.The net radiative effect of the four anthropogenic aerosols generated the annual average reduction and the maximum reduction were-0.096 and-0.285 K,respectively,for the surface temperature in 2006,while in 2010 they were-0.063 and-0.256 K,respectively.In summary,the change in source emission lowered the cooling effect of anthropogenic aerosols,mainly because of the enhanced warming effect of BC and weakened cooling effect of scattering aerosols.     

Aerosol modulation of atmospheric and surface solar heating over the tropical Indian Ocean

The major finding of this study is that aerosols over the tropical Indian Ocean enhance clear sky atmospheric solar heating significantly and decrease the surface solar heating by even a larger amount. The results presented here are based on aerosol chemical, microphysical, and optical and radiometric data collected at the island of Kaashidhoo (4.97°N, 73.47°E) during February and March of 1998, as part of the first field phase of the Indian Ocean experiment (INDOEX). The aerosol optical properties were integrated with a multiple scattering Monte Carlo radiative transfer model which was validated at the surface with broadband flux measurements and at the top of the atmosphere (TOA) with the clouds and earth's radiant energy system (CERES) radiation budget measurements. We consider both externally and internally mixed aerosol models with very little difference between the two models in the estimated forcing. For the February–March period, the aerosols increase the monthly mean clear sky atmospheric solar heating by about 12 W/m²(about 15% of the total atmospheric solar heating) and decrease the sea surface clear sky solar heating by about 16 W/m² with a daily range from 5 to 23 W/m². The net aerosol forcing at the top of the atmosphere is about −4 W/m² with a daily range from −2 to −6 W/m². Although the soot contributes only about 10% to the aerosol optical thickness, it contributes more than 50% to the aerosol induced atmospheric solar heating. The fundamental conclusion of this study is that anthropogenic aerosols over the tropical Indian Ocean are altering the clear sky radiation budget of the atmosphere and surface in a major manner.     

Chemical composition of the background aerosol at two sites in southwestern and northwestern China: potential influences of regional transport

Concentrations of organic carbon (OC), elemental carbon (EC), selected trace elements and water-soluble (WS) ions were determined for samples collected from August 2004 to February 2005 to assess the aerosol background at two remote sites in China. The OC and EC concentrations in PM₁₀ from near the Tibetan Plateau at Zhuzhang (ZUZ) were comparable with other background sites, averaging 3.1 and 0.34 μg m⁻³, respectively, with no pronounced seasonality. At Akdala (AKD) on northern margin of the Zhungaer Basin, the average concentrations were similar (mean OC = 2.9 μg m⁻³ and EC = 0.35 μg m⁻³), but the concentrations were higher in winter. The aerosol mass at both sites was dominated by OC and SO₄²⁻, but a stronger contribution from soil dust was observed at AKD. At ZUZ, NO₃⁻ showed a unique weather-related fluctuation in PM₁₀ with a periodicity of ∼1 week. Anthropogenic sources in the Sichuan Basin and southeastern Yunnan Province evidently influence ZUZ in summer and autumn while pollutants from Russia and the China–Mongolia border affect AKD nearly all year. The identification of these upwind sources demonstrates that transboundary transport needs to be taken into account when assessing air quality in remote parts of China.     

Dissecting Future Aerosol Emissions: warming Tendencies and Mitigation Opportunities

Future global emissions of aerosols will play an important role in governing the nature and magnitude of future anthropogenic climate change. We present in this paper a number of future scenarios of emissions of black carbon (BC) and organic carbon (OC) by world region, which we combine with sulfate (SO₄) assessed in terms of the emissions of its precursor, SO₂. We find that aerosol emissions from the household and industrial sectors are likely to decline along almost all future pathways. Transportation emissions, however, are subject to complex interacting forces that can lead to either increases or decreases. Biomass burning declines in many scenarios, but the Amazon rainforests remain vulnerable if unsustainable economic growth persists. East Asia is the key region for primary aerosols, and trends in China will have a major bearing on the direction and magnitude of releases of BC (expected reductions in the range of 640–1290 Gg), OC (reductions of 520–1900 Gg), and SO₂ (ranging from an increase of 21 Tg to a reduction of 30 Tg). Analysis of joint BC, OC, and SO₂ emission changes identifies a number of key world regions and economic sectors that could be effectively targeted for aerosol reductions.     

不同污染条件下气溶胶对短波辐射通量影响的模拟研究

将高光谱分辨率的气溶胶光学参数化方案应用于高精度的辐射传输模式BCC_RAD（974带）中,研究不同污染状况下气溶胶在地表与近地层大气中造成的直接辐射强迫与辐射强迫效率。发现气溶胶在地表产生的直接辐射强迫为负,在近地层大气中产生的直接辐射强迫为正,且随气溶胶浓度的升高变大,说明大气气溶胶的含量越高,单位气溶胶光学厚度产生的直接辐射强迫越大。将短波划分为3个波段:紫外、可见光和近红外,发现在紫外、可见光和近红外波段中,不同污染状况下气溶胶在地表造成的直接辐射强迫范围分别为:-1.36—-13.66、-3.03—-32.41和-2.74—-28.62 W/m2,在近地层大气中产生的直接辐射强迫范围分别为0.44—4.26、0.99—9.80和0.93—8.87 W/m2。通过进一步对比自然和人为气溶胶的影响,发现人为气溶胶在地表和大气层顶产生的负直接辐射强迫以及对整层和近地面大气造成的正直接辐射强迫均大于自然气溶胶的影响,且上述两种排放源的气溶胶对整层大气辐射收支的影响主要集中在800 hPa高度以下的大气中。按照地表直接辐射强迫大小来分析不同种类气溶胶的影响,结果为硫酸盐>有机碳>黑碳>海盐>沙尘;按照近地层大气直接辐射强迫大小排序则为黑碳>有机碳>沙尘>海盐>硫酸盐。最后,通过分析散射型气溶胶与吸收型气溶胶对辐射通量的影响,还探究了大气中散射与吸收过程的异同。      

硫酸盐和烟尘气溶胶辐射特性及辐射强迫的模拟估算

利用已有的硫酸盐和烟尘气溶胶折射指数资料，精确计算了这两种气溶胶从太阳短波到红外谱段的辐射特性。然后，在LLNL化学输送模式(CTM)模拟的硫酸盐和烟尘气溶胶资料及改进的气溶胶参数化基础上，在国内首次用GCM估算了这两种气溶胶引起的全球辐射强迫。结果表明:(1)西欧是全球最大的硫酸盐辐射强迫中心，最大值出现在夏季，达-5.0W/m2；(2)烟尘强迫的最大中心出现在夏季的南美和非洲中南部，为4.0W/m2；(3)南半球大陆人为气溶胶的强迫不容忽视；(4)某些地区人为气溶胶的强迫在量值上可与CO2等温室气体引起的强迫相比拟。     

关于硝酸盐气溶胶光学特征和辐射强迫的研究进展

在过去的20多年里,中外对硫酸盐气溶胶做了大量的研究,对它在大气中的排放、含量、光学特征和辐射强迫有了深入的认识;由于硝酸盐气溶胶在大气中平均含量比硫酸盐低很多,因此过去人们对硝酸盐的研究没有给予重视。然而,近年来的研究表明,硝酸盐气溶胶的散射性质在某些波段甚至强于硫酸盐;同时,由于未来对人为硫酸盐前体物的减排,硫酸盐气溶胶排放会大幅度减少,而硝酸盐气溶胶的排放却增长迅速,其在人为气溶胶中所占的比重越来越高,将会导致其在未来造成的辐射强迫有可能超过硫酸盐,使得其在地区范围内和季节尺度上成为重要的辐射强迫和气候影响因子。中国是硝酸盐气溶胶排放量较大的地区,硝酸盐对未来中国气候和气候变化的影响显得越来越重要。因此,就近年来有关硝酸盐气溶胶的排放和在大气中的浓度变化、光学厚度分布特征及其辐射强迫的研究进展做了回顾和介绍,并对其未来的研究做了展望。     

东亚地区人为气溶胶直接辐射强迫及其气候效应的数值模拟

利用耦合化学过程的区域气候模式RegCM3,模拟研究3种主要人为排放气溶胶(硫酸盐、黑碳、有机碳)对东亚区域气候的影响.计算分析近20 a来3种气溶胶的时空分布、综合辐射强迫作用及其对地面气温和降水的影响.模拟结果表明:3种气溶胶冬夏季分布有所不同,冬季气溶胶大值区主要分布在南方地区,而夏季大值区北移;气溶胶短波辐射强迫在大气层顶和地面均为负值;气溶胶的加入对东亚地区地表气温有明显影响,冬季降温中心位于四川盆地,夏季降温大值区位于华北地区.气溶胶直接气候效应使得冬季东亚大部分地区降水减少,夏季东亚地区降水与中国南方地区夏季气溶胶浓度有较好的相关关系,中国东部雨带有南移趋势.     

Characteristics of Anthropogenic Sulfate and Carbonaceous Aerosols over East Asia： Regional Modeling and Observation

The authors present spatial and temporal characteristics of anthropogenic sulfate and carbonaceous aerosols over East Asia using a 3-D coupled regional climate-chemistry-aerosol model, and compare the simulation with the limited aerosol observations over the region. The aerosol module consists of SO2, SO4^2-, hydrophobic and hydrophilic black carbon （BC） and organic carbon compounds （OC）, including emission, advections, dry and wet deposition, and chemical production and conversion. The simulated patterns of SO2 are closely tied to its emission rate, with sharp gradients between the highly polluted regions and more rural areas. Chemical conversion （especially in the aqueous phase） and dry deposition remove 60% and 30% of the total SO2 emission, respectively. The SO4^2- shows less horizontal gradient and seasonality than SO2, with wet deposition （60%） and export （27%） being two major sinks. Carbonaceous aerosols are spatially smoother than sulfur species. The aging process transforms more than 80% of hydrophobic BC and OC to hydrophilic components, which are removed by wet deposition （60%） and export （30%）. The simulated spatial and seasonal SO4^2-, BC and OC aerosol concentrations and total aerosol optical depth are generally consistent with the observations in rural areas over East Asia, with lower bias in simulated OC aerosols, likely due to the underestimation of anthropogenic OC emissions and missing treatment of secondary organic carbon. The results suggest that our model is a useful tool for characterizing the anthropogenic aerosol cycle and for assessing its potential climatic and environmental effects in future studies.     

Short-wave aerosol radiative efficiency over the global oceans derived from satellite data

Using 5 yr (December 2000–November 2005) of satellite data from the clouds and the earths radiant energy system (CERES) and moderate resolution imaging spectroradiometer (MODIS), we examine the instantaneous short-wave radiative efficiency ( E_τ ) of aerosols during the morning Terra satellite overpass time over the global oceans (60°N–60°S). We calculate E_τ using two commonly used methods. The first method uses the MODIS aerosol optical thickness (AOT) at 0.55 μm with radiative transfer calculations, whereas the second method utilizes the same AOT values along with a new generation of aerosol angular distribution models to convert the CERES-measured broad-band radiances to fluxes. Over the 5 yr, the global mean instantaneous E_τ between the methods is remarkably consistent and within 5 W m⁻²τ⁻¹ with a mean value of –70 W m⁻²τ⁻¹. The largest differences between the methods occur in high-latitude regions, primarily in the Southern Hemisphere, where AOT is low. In dust dominated regions, there is an excellent agreement between the methods with differences of <3 W m⁻²τ⁻¹. These differences are largely due to assumptions in aerosol models and definition of clear sky backgrounds. Independent assessments of aerosol radiative effects from different satellite sensors and methods are extremely valuable and should be used to verify numerical modelling simulations.     

Direct Radiative Forcing of Anthropogenic Aerosols over Oceans from Satellite Observations

Anthropogenic aerosols play an important role in the atmospheric energy balance. Anthropogenic aerosol optical depth (AOD) and its accompanying shortwave radiative forcing (RF) are usually simulated by nu- merical models. Recently, with the development of space-borne instruments and sophisticated retrieval algorithms, it has become possible to estimate aerosol radiative forcing based on satellite observations. In this study, we have estimated shortwave direct radiative forcing due to anthropogenic aerosols over oceans in all-sky conditions by combining clouds and the Single Scanner Footprint data of the Clouds and Earth’s Radiant Energy System (CERES/SSF) experiment, which provide measurements of upward shortwave fluxes at the top of atmosphere, with Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol and cloud products. We found that globally averaged aerosol radiative forcing over oceans in the clear-sky conditions and all-sky conditions were -1.03±0.48 W m-2 and -0.34 ±0.16 W m-2, respectively. Direct radiative forcing by anthropogenic aerosols shows large regional and seasonal variations. In some regions and in particular seasons, the magnitude of direct forcing by anthropogenic aerosols can be comparable to the forcing of greenhouse gases. However, it shows that aerosols caused the cooling effect, rather than warming effect from global scale, which is different from greenhouse gases.     

中国地区气溶胶的辐射强迫及其气候响应试验

根据国内测定的排放因子数据和国家、部委及各省市统计年鉴公布的排放源数据,得到的中国大陆的1°×1°网格精度的SO2的排放分布,计算了中国地区人为扰动气溶胶的辐射强迫。应用近期开发的二维能量平衡模式计算了由该种气溶胶所引起的中国地区地面温度变化。模式结果表明,最大辐射强迫和最大地面温度变化都集中在中国的沿海和四川地区。最大辐射强迫达3 W/m2。     

Direct and semi-direct radiative effects of anthropogenic aerosols in the Western United States: Seasonal and geographical variations according to regional climate characteristics

The direct and semi-direct radiative effects of anthropogenic aerosols on the radiative transfer and cloud fields in the Western United States (WUS) according to seasonal aerosol optical depth (AOD) and regional climate are examined using a regional climate model (RCM) in conjunction with the aerosol fields from a GEOS-Chem chemical-transport model (CTM) simulation. The two radiative effects cannot be separated within the experimental design in this study, thus the combined direct- and semi-direct effects are called radiative effects hereafter. The CTM shows that the AOD associated with the anthropogenic aerosols is chiefly due to sulfates with minor contributions from black carbon (BC) and that the AOD of the anthropogenic aerosol varies according to local emissions and the seasonal low-level winds. The RCM-simulated anthropogenic aerosol radiative effects vary according to the characteristics of regional climate, in addition to the AOD. The effects on the top of the atmosphere (TOA) outgoing shortwave radiation (OSRT) range from ?0.2?Wm^?2 to ?1?Wm^?2. In Northwestern US (NWUS), the maximum and minimum impact of anthropogenic aerosols on OSRT occurs in summer and winter, respectively, following the seasonal AOD. In Arizona-New Mexico (AZNM), the effect of anthropogenic sulfates on OSRT shows a bimodal distribution with winter/summer minima and spring/fall maxima, while the effect of anthropogenic BC shows a single peak in summer. The anthropogenic aerosols affect surface insolation range from ?0.6?Wm^?2 to ?2.4?Wm^?2, with similar variations found for the effects on OSRT except that the radiative effects of anthropogenic BC over AZNM show a bimodal distribution with spring/fall maxima and summer/winter minima. The radiative effects of anthropogenic sulfates on TOA outgoing longwave radiation (OLR) and the surface downward longwave radiation (DLRS) are notable only in summer and are characterized by strong geographical contrasts; the summer OLR in NWUS (AZNM) is reduced (enhanced) by 0.52?Wm^?2 (1.14?Wm^?2). The anthropogenic sulfates enhance (reduce) summer DLRS by 0.2?Wm^?2 (0.65?Wm^?2) in NWUS (AZNM). The anthropogenic BC affect DLRS noticeably only in AZNM during summer. The anthropogenic aerosols affect the cloud water path (CWP) and the radiative transfer noticeably only in summer when convective clouds are dominant. Primarily shortwave-reflecting anthropogenic sulfates decrease and increase CWP in AZNM and NWUS, respectively, however, the shortwave-absorbing anthropogenic BC reduces CWP in both regions. Due to strong feedback via convective clouds, the radiative effects of anthropogenic aerosols on the summer radiation field are more closely correlated with the changes in CWP than the AOD. The radiative effect of the total anthropogenic aerosols is dominated by the anthropogenic sulfates that contribute more than 80% of the total AOD associated with the anthropogenic aerosols.     

Assessment of Individual Direct Radiative Effects of Major Aerosol Species in East Asia

To assess individual direct radiative effects of diverse aerosol species on a regional scale,the air quality modeling system RAMS-CMAQ(Regional Atmospheric Modeling System and Community Multiscale Air Quality) coupled with an aerosol optical properties/radiative transfer module was used to simulate the temporal and spatial distributions of their optical and radiative properties over East Asia throughout 2005.Annual and seasonal averaged aerosol direct radiative forcing(ADRF) of all important aerosols and individual components,such as sulfate,nitrate,ammonium,black carbon(BC),organic carbon(OC),and dust at top-of-atmosphere(TOA) in clear sky are analyzed.Analysis of the model results shows that the annual average ADRF of all important aerosols was in the range of 0 to-18 W m?2,with the maximum values mainly distributed over the Sichuan Basin.The direct radiative effects of sulfate,nitrate,and ammonium make up most of the total ADRF in East Asia,being concentrated mainly over North and Southeast China.The model domain is also divided into seven regions based on different administrative regions or countries to investigate detailed information about regional ADRF variations over East Asia.The model results show that the ADRFs of sulfate,ammonium,BC,and OC were stronger in summer and weaker in winter over most regions of East Asia,except over Southeast Asia.The seasonal variation in the ADRF of nitrate exhibited the opposite trend.A strong ADRF of dust mainly appeared in spring over Northwest China and Mongolia.     

Climatic effects of air pollutants over china: A review

Tropospheric ozone(O3) and aerosols are major air pollutants in the atmosphere. They have also made significant contributions to radiative forcing of climate since preindustrial times. With its rapid economic development, concentrations of air pollutants are relatively high in China; hence, quantifying the role of air pollutants in China in regional climate change is especially important. This review summarizes existing knowledge with regard to impacts of air pollutants on climate change in China and defines critical gaps needed to reduce the associated uncertainties. Measured monthly, seasonal, and annual mean surface-layer concentrations of O3 and aerosols over China are compiled in this work, with the aim to show the magnitude of concentrations of O3 and aerosols over China and to provide datasets for evaluation of model results in future studies. Ground-based and satellite measurements of O3 column burden and aerosol optical properties, as well as model estimates of radiative forcing by tropospheric O3 and aerosols are summarized. We also review regional and global modeling studies that have investigated climate change driven by tropospheric O3and/or aerosols in China; the predicted sign and magnitude of the responses in temperature and precipitation to O3/aerosol forcings are presented. Based on this review, key priorities for future research on the climatic effects of air pollutants in China are highlighted.     

Assessment of the first indirect radiative effect of ammonium-sulfate-nitrate aerosols in East Asia

A physically based cloud nucleation parameterization was introduced into an optical properties/radiative transfer module incorporated with the off-line air quality modeling system Regional Atmospheric Modeling System (RAMS)-Models-3 Community Multi Scale Air Quality (CMAQ) to investigate the distribution features of the first indirect radiative effects of sulfate, nitrate, and ammonium-sulfate-nitrate (ASN) over East Asia for the years of 2005, 2010, and 2013. The relationship between aerosol particles and cloud droplet number concentration could be properly described by this parameterization because the simulated cloud fraction and cloud liquid water path were generally reliable compared with Moderate Resolution Imaging Spectroradiometer (MODIS) retrieved data. Simulation results showed that the strong effect of indirect forcing was mainly concentrated in Southeast China, the East China Sea, the Yellow Sea, and the Sea of Japan. The highest indirect radiative forcing of ASN reached ?3.47 W m^?2 over Southeast China and was obviously larger than the global mean of the indirect forcing of all anthropogenic aerosols. In addition, sulfate provided about half of the contribution to the ASN indirect forcing effect. However, the effect caused by nitrate was weak because the mass burden of nitrate was very low during summer, whereas the cloud fraction was the highest. The analysis indicated that even though the interannual variation of indirect forcing magnitude generally followed the trend of aerosol mass burden from 2005 to 2013, the cloud fraction was an important factor that determined the distribution pattern of indirect forcing. The heaviest aerosol loading in North China did not cause a strong radiative effect because of the low cloud fraction over this region.     

Spectral surface albedo over Morocco and its impact on radiative forcing of Saharan dust

In May–June 2006, airborne and ground-based solar (0.3–2.2 μm) and thermal infrared (4–42 μm) radiation measurements have been performed in Morocco within the Saharan Mineral Dust Experiment (SAMUM). Upwelling and downwelling solar irradiances have been measured using the Spectral Modular Airborne Radiation Measurement System (SMART)-Albedometer. With these data, the areal spectral surface albedo for typical surface types in southeastern Morocco was derived from airborne measurements for the first time. The results are compared to the surface albedo retrieved from collocated satellite measurements, and partly considerable deviations are observed. Using measured surface and atmospheric properties, the spectral and broad-band dust radiative forcing at top-of-atmosphere (TOA) and at the surface has been estimated. The impact of the surface albedo on the solar radiative forcing of Saharan dust is quantified. In the SAMUM case of 19 May 2006, TOA solar radiative forcing varies by 12 W m⁻² per 0.1 surface-albedo change. For the thermal infrared component, values of up to +22 W m⁻² were derived. The net (solar plus thermal infrared) TOA radiative forcing varies between −19 and +24 W m⁻² for a broad-band solar surface albedo of 0.0 and 0.32, respectively. Over the bright surface of southeastern Morocco, the Saharan dust always has a net warming effect.     

Climate forcing by carbonaceous and sulfate aerosols

 An atmospheric general circulation model is coupled to an atmospheric chemistry model to calculate the radiative forcing by anthropogenic sulfate and carbonaceous aerosols. The latter aerosols result from biomass burning as well as fossil fuel burning. The black carbon associated with carbonaceous aerosols is absorbant and can decrease the amount of reflected radiation at the top-of-the-atmosphere. In contrast, sulfate aerosols are reflectant and the amount of reflected radiation depends nonlinearly on the relative humidity. We examine the importance of treating the range of optical properties associated with sulfate aerosol at high relative humidities and find that the direct forcing by anthropogenic sulfate aerosols can decrease from −0.81 W m^-2 to −0.55 Wm^-2 if grid box average relative humidity is not allowed to increase above 90%. The climate forcing associated with fossil fuel emissions of carbonaceous aerosols is calculated to range from +0.16 to +0.20 Wm^-2, depending on how much organic carbon is associated with the black carbon from fossil fuel burning. The direct forcing of carbonaceous aerosols associated with biomass burning is calculated to range from −0.23 to −0.16 Wm^-2. The pattern of forcing by carbonaceous aerosols depends on both the surface albedo and the presence of clouds. Multiple scattering associated with clouds and high surface albedos can change the forcing from negative to positive. Received: 29 September 1997 / Accepted: 10 June 1998     

Influences of the Internal Mixing of Anthropogenic Aerosols on Global Aridity Change

Influences of the mixing treatments of anthropogenic aerosols on their effective radiative forcing (ERF) and global aridity are evaluated by using the BCC_AGCM2.0_CUACE/Aero, an aerosol–climate online coupled model. Simulations show that the negative ERF due to external mixing (EM, a scheme in which all aerosol particles are treated as independent spheres formed by single substance) aerosols is largely reduced by the partial internal mixing (PIM, a scheme in which some of the aerosol particles are formed by one absorptive and one scattering substance) method. Compared to EM, PIM aerosols have much stronger absorptive ability and generally weaker hygroscopicity, which would lead to changes in radiative forcing, hence to climate. For the global mean values, the ERFs due to anthropogenic aerosols since the pre-industrial are–1.02 and–1.68 W m^–2 for PIM and EM schemes, respectively. The variables related to aridity such as global mean temperature, net radiation flux at the surface, and the potential evaporation capacity are all decreased by 2.18/1.61 K, 5.06/3.90 W m^–2, and 0.21/0.14 mm day^–1 since 1850 for EM and PIM schemes, respectively. According to the changes in aridity index, the anthropogenic aerosols have caused general humidification over central Asia, South America, Africa, and Australia, but great aridification over eastern China and the Tibetan Plateau since the pre-industrial in both mixing schemes. However, the aridification is considerably alleviated in China, but intensified in the Arabian Peninsula and East Africa in the PIM scheme.     

A Modeling Study of the Climate Effects of Sulfate and Carbonaceous Aerosols over China

In this paper, the RIEMS 2.0 model is used to simulate the distribution of sulfate, black carbon, and organic carbon aerosols over China (16.2°-44.1°N, 93.4°-132.4°E) in 1998. The climate effects of these three anthropogenic aerosols are also simulated. The results are summarized as follows: (1) The regional average column burdens of sulfate, BC, OC, and SOC were 5.9, 0.24, 2.4, and 0.49 mg m-2, with maxima of 33.9, 1.48, 7.3, and 1.1 mg m-2, respectively. The column burden and surface concentration of seco...