Surface Temperature and Surface-Layer Turbulence in a Convective Boundary Layer

Previous laboratory and atmospheric experiments have shown that turbulence influences the surface temperature in a convective boundary layer. The main objective of this study is to examine land-atmosphere coupled heat transport mechanism for different stability conditions. High frequency infrared imagery and sonic anemometer measurements were obtained during the boundary layer late afternoon and sunset turbulence (BLLAST) experimental campaign. Temporal turbulence data in the surface-layer are then analyzed jointly with spatial surface-temperature imagery. The surface-temperature structures (identified using surface-temperature fluctuations) are strongly linked to atmospheric turbulence as manifested in several findings. The surface-temperature coherent structures move at an advection speed similar to the upper surface-layer or mixed-layer wind speed, with a decreasing trend with increase in stability. Also, with increasing instability the streamwise surface-temperature structure size decreases and the structures become more circular. The sequencing of surface- and air-temperature patterns is further examined through conditional averaging. Surface heating causes the initiation of warm ejection events followed by cold sweep events that result in surface cooling. The ejection events occur about 25 % of the time, but account for 60–70 % of the total sensible heat flux and cause fluctuations of up to 30 % in the ground heat flux. Cross-correlation analysis between air and surface temperature confirms the validity of a scalar footprint model.     

A generalized scaling for convective shear flows

During the last two decades, different scalings for convective boundary layer (CBL) turbulence have been proposed. For the shear-free regime, Deardorff (1970) introduced convective velocity and temperature scales based on the surface potential temperature flux,Q _s , the buoyancy parameter, , and the time-dependent boundary-layer depth,h. Wyngaard (1983) has proposed decomposition of turbulence into two components, bottom-up (b) and top-down (t), the former characterized byQ _s , the latter, by the potential temperature flux due to entrainment,Q _h . Sorbjan (1988) has devised height-dependent velocity and temperature scales for both b- and t-components of turbulence.Incorporating velocity shear, the well known similarity theory of Monin and Obukhov (1954) has been developed for the atmospheric surface layer. Zilitinkevich (1971, 1973) and Betchov and Yaglom (1971) have elaborated this theory with the aid of directional dimensional analysis for a particular case when different statistical moments of turbulence can be alternatively attributed as being of either convective or mechanical origin.In the present paper, we attempt to create a bridge between the two approaches pointed out above. A new scaling is proposed on the basis of, first, decomposition of statistical moments of turbulence into convective (c), mechanical (m) and covariance (c&m) contributions using directional dimensional analysis and, second, decomposition of these contributions into bottom-up and top-down components using height-dependent velocity and temperature scales. In addition to the statistical problem, the scaling suggests a new approach of determination of mean temperature and velocity profiles with the aid of the budget equations for the mean square fluctuations.Notation ATL alternative turbulence layer - CBL convective boundary layer - CML convective and mechanical layer - FCL free convection layer - MTL mechanical turbulence layer     

Convective scaling of the average dissipation rate of temperature variance in the atmospheric surface layer

The flux of sensible heat from the land surface is related to the average rate of dissipation of temperature fluctuations in the atmospheric surface layer through the temperature variance budget equation. In many cases it is desirable to estimate the heat flux from measurement or inference of the dissipation rate. Here we study how the dissipation rate scales with atmospheric stability, using three inertial range methods to calculate the dissipation rate: power spectra, second order structure functions, and third order structure functions. Experimental data are analyzed from a pair of field experiments, during which turbulent fluctuations of velocity and temperature were measured over a broad range of neutral and unstable atmospheric flows. It is shown that the temperature dissipation rate scales with a single convective power law continuously from near-neutral to strongly unstable stratification. The dissipation scaling is found to nearly match production in the near-neutral region, but to be consistently lower than production in the more convective regimes. The convective scaling is shown to offer a simplified means of computing sensible heat flux from the dissipation rate of temperature variance.Also at Johns Hopkins University, Baltimore, MarylandAlso at Los Alamos National Laboratory, Los Alamos, New Mexico.     

Wind-Turbine Wakes in a Convective Boundary Layer: A Wind-Tunnel Study

Thermal stability changes the properties of the turbulent atmospheric boundary layer, and in turn affects the behaviour of wind-turbine wakes. To better understand the effects of thermal stability on the wind-turbine wake structure, wind-tunnel experiments were carried out with a simulated convective boundary layer (CBL) and a neutral boundary layer. The CBL was generated by cooling the airflow to 12–15 °C and heating up the test section floor to 73–75 °C. The freestream wind speed was set at about 2.5 m s^?1, resulting in a bulk Richardson number of ?0.13. The wake of a horizontal-axis 3-blade wind-turbine model, whose height was within the lowest one third of the boundary layer, was studied using stereoscopic particle image velocimetry (S-PIV) and triple-wire (x-wire/cold-wire) anemometry. Data acquired with the S-PIV were analyzed to characterize the highly three-dimensional turbulent flow in the near wake (0.2–3.2 rotor diameters) as well as to visualize the shedding of tip vortices. Profiles of the mean flow, turbulence intensity, and turbulent momentum and heat fluxes were measured with the triple-wire anemometer at downwind locations from 2–20 rotor diameters in the centre plane of the wake. In comparison with the wake of the same wind turbine in a neutral boundary layer, a smaller velocity deficit (about 15 % at the wake centre) is observed in the CBL, where an enhanced radial momentum transport leads to a more rapid momentum recovery, particularly in the lower part of the wake. The velocity deficit at the wake centre decays following a power law regardless of the thermal stability. While the peak turbulence intensity (and the maximum added turbulence) occurs at the top-tip height at a downwind distance of about three rotor diameters in both cases, the magnitude is about 20 % higher in the CBL than in the neutral boundary layer. Correspondingly, the turbulent heat flux is also enhanced by approximately 25 % in the lower part of the wake, compared to that in the undisturbed CBL inflow. This study represents the first controlled wind-tunnel experiment to study the effects of the CBL on wind-turbine wakes. The results on decreased velocity deficit and increased turbulence in wind-turbine wakes associated with atmospheric thermal stability are important to be taken into account in the design of wind farms, in order to reduce the impact of wakes on power output and fatigue loads on downwind wind turbines.     

Parameterization of Entrainment in a Sheared Convective Boundary Layer Using a First-order Jump Model

Basic entrainment equations applicable to the sheared convective boundary layer (CBL) are derived by assuming an inversion layer with a finite depth, i.e., the first-order jump model. Large-eddy simulation data are used to determine the constants involved in the parameterizations of the entrainment equations. Based on the integrated turbulent kinetic energy budget from surface to the top of the CBL, the resulting entrainment heat flux normalized by surface heat flux is a function of the inversion layer depth, the velocity jumps across the inversion layer, the friction velocity, and the convection velocity. The developed first-order jump model is tested against large-eddy simulation data of two independent cases with different inversion strengths. In both cases, the model reproduces quite reasonably the evolution of the CBL height, virtual potential temperature, and velocity components in the mixed layer and in the inversion layer.The part of this work was done when the first author visited at NCAR.     

Evidence of a Convective Boundary Layer Developingon the Antarctic Plateau during the Summer

Summary The development of a convective boundary layer over the Antarctic Plateau is documented by a Doppler minisodar data-set recorded during a 10 day campaign in January 1997. The vertical velocities associated with thermals do not exceed 1 m/s, while the depth of the convective layer, usually less than 200 m, never surpasses 300 m. Measurements of momentum flux, sensible heat flux, wind speed and radiation budget show characteristics that are typical of a convective boundary layer evolution. The diurnal behaviour of absolute humidity, however, exhibits features that are not expected, e.g. anticorrelation with incoming net radiation and air temperature. Received October 30, 1998 Revised May 26, 1999     

Vertical Structure Of Turbulence In Offshore Flow During Rasex

The adjustment of the boundary layer immediately downstream froma coastline is examined based on two levels of eddy correlation data collected on a mast at the shore and six levels of eddy correlation data and profiles of mean variables collected from a mast 2 km offshore during the Risø Air-Sea Experiment. The characteristics of offshore flow are studied in terms of case studies and inter-variable relationships for the entire one-month data set. A turbulent kinetic energy budget is constructed for each case study.The buoyancy generation of turbulence is small compared to shear generation and dissipation. However, weakly stable and weakly unstable cases exhibit completely different vertical structure. With flow of warm air from land over cooler water, modest buoyancy destruction of turbulence and reduced shear generation of turbulence over the less rough sea surface cause the turbulence to rapidly weaken downstream from the coast. The reduction of downward mixing of momentum by the stratification leads to smaller roughness lengths compared to the unstable case. Shear generation at higher levels and advection of stronger turbulence from land often lead to an increase of stress and turbulence energy with height and downward transport of turbulence energy toward the surface.With flow of cool air over a warmer sea surface, a convective internal boundary layer develops downstream from the coast. An overlying relatively thick layer of downward buoyancy flux (virtual temperature flux) is sometimes maintained by shear generation in the accelerating offshore flow.     

日间对流边界层中的非局地动量混合

日间对流边界层最显著的结构特征是在热力作用下所形成的组织化对流。与小尺度湍涡不同的是，组织化对流具有边界层尺度的垂直相干性，可实现垂直贯穿边界层的非局地物质和能量传输。本文针对对流边界层中的动量混合，探究组织化对流对动量输送的贡献。以高精度大涡模拟数据为研究资料，通过傅里叶变换、本征正交分解和经验模态分解3种滤波方法，分离组织化对流和背景湍涡，计算与两者相关的非局地和局地动量通量，发现与组织化对流相关的非局地动量通量是总通量的重要组成部分，并主导混合层中的垂直动量输送。而后，基于协谱和相位谱分析，探究组织化对流的空间结构对动量传输的影响，发现在热力主导的不稳定环境中，单体型环流结构对动量的传输效率较低。而在风切较强的近中性环境中，滚涡型组织化结构可使垂直和水平流向扰动速度的相位差减小，从而提升动量传输效率。研究结果表明，边界层方案需要包含非局地动量通量项，其参数化应考虑整体稳定度对传输效率的影响。     

Statistics of shallow convection on Mars based on large-eddy simulations. Part 1: shearless conditions

Results of large-eddy simulations of shallow, quasi-steady, shear-less convection in the Martian boundary layer are presented and discussed. In the considered three cases, turbulence is forced by the radiative flux divergence, prescribed as given functions of height, and the strength of the surface heat flux. It is constrained by the temperature inversion at the boundary-layer top. The resulting convective boundary layer exhibits horizontal cellular structures. The presence of radiative heating causes dimensionless statistics of turbulence to depend on the parameter F, defined in terms of the integrated radiative and turbulent heating rates in the boundary layer.     

PBL similarity profiles determined from a level-2 turbulence-closure model

A diagnostic model for the determination of similarity profiles of turbulence and mean-wind gradient in the planetary boundary layer is developed. Vertical profiles of a turbulence length scale and the flux Richardson number are formulated through the extension of the relationships for the constant flux layer. These profiles together with a turbulence energy equation and a similarity profile empirically determined for heat or momentum flux are used to compute the turbulence energy. Relationships previously derived from a turbulence closure model are used to compute second moments of turbulence.     

Turbulence Characteristics of the Shear-Free Convective Boundary Layer Driven by Heterogeneous Surface Heating

Large-eddy simulations (LESs) are employed to investigate the turbulence characteristics in the shear-free convective boundary layer (CBL) driven by heterogeneous surface heating. The patterns of surface heating are arranged as a chessboard with two different surface heat fluxes in the neighbouring patches, and the heterogeneity scale Λ in four different cases is taken as 1.2, 2.5, 5.0 and 10.0 km, respectively. The results are compared with those for the homogeneous case. The impact of the heterogeneity scale on the domain-averaged CBL characteristics, such as the profiles of the potential temperature and the heat flux, is not significant. However, different turbulence characteristics are induced by different heterogeneous surface heating. The greatest turbulent kinetic energy (TKE) is produced in the case with the largest heterogeneity scale, whilst the TKE in the other heterogeneous cases is close to that for the homogeneous case. This result indicates that the TKE is not enhanced unless the scale of the heterogeneous surface heating is large enough. The potential temperature variance is enhanced more significantly by a larger surface heterogeneity scale. But this effect diminishes with increasing CBL height, which implies that the turbulent eddy structures are changed during the CBL development. Analyses show that there are two types of organized turbulent eddies: one relates to the thermal circulations induced by the heterogeneous surface heating, whilst the other identifies with the inherent turbulent eddies (large eddies) induced by the free convection. At the early stage of the CBL development, the dominant scale of the organized turbulent eddies is controlled by the scale of the surface heterogeneity. With time increasing, the original pattern breaks up, and the vertical velocity eventually displays horizontal structures similar to those for the homogeneous heating case. It is found that after this transition, the values of λ/z _i (λ is the dominant horizontal scale of the turbulent eddies, z _i is the boundary-layer height) ≈1.6, which is just the aspect ratio of large eddies in the CBL.     

Large-Eddy Simulations of Vertical Vortex Formation in the Terrestrial and Martian Convective Boundary Layers

Large-eddy simulations (LES) of the Martian and terrestrial convective boundary layers (CBL) are performed to compare the physical characteristics of simulated convective vertical vortices to those of observed dust devils and vortices. Martian and terrestrial CBLs are outwardly found to have similar structures and turbulence statistics based on primary mechanisms for the transfer of energy from the insolated surface. Applying the heating effect of radiative flux divergence in the Martian atmosphere caused differences in atmospheric vertical profiles in the surface and mixed layers of Mars. In general, the Martian boundary layer is found to be roughly four times deeper than Earth’s, indicating that convection on Mars is more intense than that on Earth due to a lower atmospheric density. Performing fine-resolution simulations in quiescent atmospheres of the two planets, it is found that the general vorticity development in all cases is similar and that the Martian vorticity columns extend six times higher and are 10 times wider than those on Earth. The accuracy of the simulated vortices as compared with observed physical characteristics is discussed. This study is a necessary part of a larger effort for the Phoenix Mars mission and examines the possible formation and maintenance mechanisms for vertical vortices in the Martian convective boundary layer at the Phoenix lander site.     

Entrainment Processes in the Convective Boundary Layer with Varying Wind Shear

Large-eddy simulations (LES) are performed to investigate the entrainment andthe structure of the inversion layer of the convective boundary layer (CBL) withvarying wind shears. Three CBLs are generated with the constant surface kinematicheat flux of 0.05 K m s^-1 and varying geostrophic wind speeds from 5 to 15m s^-1. Heat flux profiles show that the maximum entrainment heat flux as afraction of the surface heat flux increases from 0.13 to 0.30 in magnitude withincreasing wind shear. The thickness of the entrainment layer, relative to the depthof the well-mixed layer, increases substantially from 0.36 to 0.73 with increasingwind shear. The identification of vortices and extensive flow visualizations nearthe entrainment layer show that concentrated vortices perpendicular to the meanboundary-layer wind direction are identified in the capping inversion layer for thecase of strong wind shear. These vortices are found to develop along the mean winddirections over strong updrafts, which are generated by convective rolls and to appearas large-scale wavy motions similar to billows generated by the Kelvin–Helmholtzinstability. Quadrant analysis of the heat flux shows that in the case of strong windshear, large fluctuations of temperature and vertical velocity generated by largeamplitude wavy motions result in greater heat flux at each quadrant than that inthe weak wind shear case.     

Large-Eddy Simulations of Surface Heterogeneity Effects on the Convective Boundary Layer During the LITFASS-2003 Experiment

We investigate the impact of observed surface heterogeneities during the LITFASS-2003 experiment on the convective boundary layer (CBL). Large-eddy simulations (LES), driven by observed near-surface sensible and latent heat fluxes, were performed for the diurnal cycle and compare well with observations. As in former studies of idealized one- and two-dimensional heterogeneities, secondary circulations developed that are superimposed on the turbulent field and that partly take over the vertical transport of heat and moisture. The secondary circulation patterns vary between local and roll-like structures, depending on the background wind conditions. For higher background wind speeds, the flow feels an effective surface heat-flux pattern that derives from the original pattern by streamwise averaging. This effective pattern generates a roll-like secondary circulation with roll axes along the mean boundary-layer wind direction. Mainly the upstream surface conditions control the secondary circulation pattern, where the fetch increases with increasing background wind speed. Unlike the entrainment flux that appears to be slightly decreased compared to the homogeneously-heated CBL, the vertical flux of sensible heat appears not to be modified in the mixed layer, while the vertical flux of latent heat shows different responses to secondary circulations. The study illustrates that sufficient time averaging and ensemble averaging is required to separate the heterogeneity-induced signals from the raw LES turbulence data. This might be an important reason why experiments over heterogeneous terrain in the past did not give any clear evidence of heterogeneity-induced effects.     

Laboratory and Numerical Studies of the Convective Boundary Layer Capped by a Strong Inversion

The convective boundary layer (CBL) with a wide range of stability is simulated experimentally using a thermally stratified wind tunnel, and numerically by direct numerical simulation (DNS). The turbulence structures and flow characteristics of various CBL flows, capped by a strong temperature inversion and affected by surface shear, are investigated. The various vertical profiles of turbulence statistics similar to those from the observed CBL in the field are successfully simulated in both the wind-tunnel experiment and in DNS. The comparison of the wind-tunnel data and DNS results with those of atmospheric observations and water-tank studies shows the crucial dependence of the turbulence statistics in the upper part of the layer on the strength of the inversion layer, as well as the modification of the CBL turbulence regime by the surface shear.     

Large-Eddy Simulation of Katabatic Flows

A large-eddy simulation model with rotated coordinates and an open boundary is used to simulate the characteristics of katabatic flows over simple terrain. Experiments examine the effects of cross winds on the development of the slope-flow boundary layer for a steep (20°) slope and the role of drainage winds in preventing turbulence collapse on a gentle slope (1°). For the steep flow cases, comparisons between model average boundary-layer velocity, temperature deficit, and turbulence kinetic energy budget terms and tower observations show reasonable agreement. Results for different cross slope winds show that as the cross slope winds increase, the slope flow deepens faster and behaves more like a weakly stratified, sheared boundary layer. Analysis of the momentum budget shows that near the surface the flow is maintained by a balance between downslope buoyancy forcing and vertical turbulence flux from surface drag. Above the downslope jet, the turbulence vertical momentum flux reverses sign and acceleration of the flow by buoyancy is controlled by horizontal advection of slower moving ambient air. The turbulence budget is dominated by a balance between shear production and eddy dissipation, however, buoyancy and pressure transport both are significant in reducing the strength of turbulence above the jet. Results from the gentle slope case show that even a slight terrain variation can lead to significant drainage winds. Comparison of the gentle slope case with a flat terrain simulation indicates that drainage winds can effectively prevent the formation of very stable boundary layers, at least near the top of sloping terrain.     

Interaction between Wind and Temperature Fields in the Planetary Boundary Layer for a Spatially Heterogeneous Surface Heat Flux

Interaction between wind and temperature fields in the planetary boundary layerfor a spatially heterogeneous surface heat flux has been investigated using large-eddysimulation. It is shown that a substantial difference exists in the wind and temperaturefields, depending on whether the directions of the background wind and the surfaceheat flux variation are parallel or perpendicular.When they are parallel to each other, two-dimensional plumes induced by theheterogeneous surface heat flux are easily destroyed by the background wind,and the velocity field is strongly modified by convective eddies compared tothe case when they are perpendicular to each other. This leads to a substantialdifference in the profiles of turbulent kinetic energy and its flux.It also results in a difference between the two cases in the bulk properties of theplanetary boundary layer, such as the entrainment at the top of the planetary boundarylayer and the drag at the bottom, which have important implications for boundary-layermodelling. The difference between the two cases exists even when the background windspeed is as large as 15.0 m s^-1. Meanwhile, the contrast between two cases is weakened by the Coriolis force.     

Turbulence structure in temperature inversions and in convection fields as observed by doppler sodar

The structure of turbulence in an inversion layer and in an homogeneous convective field of the planetary boundary layer is described. In the first part of the paper, we validate the sodar estimates of turbulent dissipation, by using measurements with an hot-wire anemometric system in situ. Limitations of an ε measurement technique using structure function calculations are given, taking account of atmospheric properties and acoustic Doppler instrumental effects. By comparison between isopleths of backscattering intensity and of turbulent dissipation rates, we observe that in the early morning, turbulence is advected by mechanical turbulence generated by wind shear. The same mechanism seems to be operating in the case of an inversion layer capping thermal instability, when the convective activity is not too greatly developed. A turbulent kinetic energy budget is examined using aircraft, sodar, and tower measurements. This indicates a constant turbulent dissipation profile through a deep convective layer.     

A Theoretical Model for the Study of Convective Turbulence Decay and Comparison with Large-Eddy Simulation Data

The development of a theoretical model fora decaying convective boundary layeris considered. The model relies on thedynamical energy spectrumequation in which the buoyancy andinertial transfer terms are retained,and a closure assumptionmade for both. The parameterization for thebuoyancy term is given providing a factorizationbetween the energy source termand its temporal decay. Regarding the inertialtransfer term a hypothesis ofsuperposition is used to describe theconvective energy source and time variationof velocity correlation separately.The solution of the budget equation for theturbulent kinetic energy spectrum is possible,given the three-dimensional initial energyspectrum. This is doneutilizing a version of the Kristensen et al.(see Boundary-Layer Meteorol. 47, 149–193)model valid for non-isotropic turbulence. During thedecay the locus of the spectralpeak remains at about the sameposition as the heat flux decreases.Comparison of the theoretical modelis performed against large-eddy simulationdata for a decaying convectiveboundary layer.