Joint inversion of GNSS and teleseismic data for the rupture process of the 2017 <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript>6.5 Jiuzhaigou,China, earthquake

The spatio-temporal slip distribution of the earthquake that occurred on 8 August 2017 in Jiuzhaigou, China, was estimated from the teleseismic body wave and near-field Global Navigation Satellite System (GNSS) data (coseismic displacements and high-rate GPS data) based on a finite fault model. Compared with the inversion results from the teleseismic body waves, the near-field GNSS data can better restrain the rupture area, the maximum slip, the source time function, and the surface rupture. The results show that the maximum slip of the earthquake approaches 1.4 m, the scalar seismic moment is ~ 8.0 × 10¹⁸ N·m (M_w?≈?6.5), and the centroid depth is ~ 15 km. The slip is mainly driven by the left-lateral strike-slip and it is initially inferred that the seismogenic fault occurs in the south branch of the Tazang fault or an undetectable fault, a NW-trending left-lateral strike-slip fault, and belongs to one of the tail structures at the easternmost end of the eastern Kunlun fault zone. The earthquake rupture is mainly concentrated at depths of 5–15 km, which results in the complete rupture of the seismic gap left by the previous four earthquakes with magnitudes >?6.0 in 1973 and 1976. Therefore, the possibility of a strong aftershock on the Huya fault is low. The source duration is ~ 30 s and there are two major ruptures. The main rupture occurs in the first 10 s, 4 s after the earthquake; the second rupture peak arrives in ~ 17 s. In addition, the Coulomb stress study shows that the epicenter of the earthquake is located in the area where the static Coulomb stress change increased because of the 12 May 2017 M_w7.9 Wenchuan, China, earthquake. Therefore, the Wenchuan earthquake promoted the occurrence of the 8 August 2017 Jiuzhaigou earthquake.     

Source Parameters of the Deadly M<Subscript>w</Subscript> 7.6 Kashmir Earthquake of 8 October, 2005

During the last six years, National Geophysical Research Institute, Hyderabad has established a semi-permanent seismological network of 5–8 broadband seismographs and 10–20 accelerographs in the Kachchh seismic zone, Gujarat with a prime objective to monitor the continued aftershock activity of the 2001 M_w 7.7 Bhuj mainshock. The reliable and accurate broadband data for the 8 October M_w 7.6 2005 Kashmir earthquake and its aftershocks from this network as well as Hyderabad Geoscope station enabled us to estimate the group velocity dispersion characteristics and one-dimensional regional shear velocity structure of the Peninsular India. Firstly, we measure Rayleigh-and Love-wave group velocity dispersion curves in the period range of 8 to 35 sec and invert these curves to estimate the crustal and upper mantle structure below the western part of Peninsular India. Our best model suggests a two-layered crust: The upper crust is 13.8 km thick with a shear velocity (Vs) of 3.2 km/s; the corresponding values for the lower crust are 24.9 km and 3.7 km/sec. The shear velocity for the upper mantle is found to be 4.65 km/sec. Based on this structure, we perform a moment tensor (MT) inversion of the bandpass (0.05–0.02 Hz) filtered seismograms of the Kashmir earthquake. The best fit is obtained for a source located at a depth of 30 km, with a seismic moment, Mo, of 1.6 × 10²⁷ dyne-cm, and a focal mechanism with strike 19.5°, dip 42°, and rake 167°. The long-period magnitude (M_A ~ M_w) of this earthquake is estimated to be 7.31. An analysis of well-developed sPn and sSn regional crustal phases from the bandpassed (0.02–0.25 Hz) seismograms of this earthquake at four stations in Kachchh suggests a focal depth of 30.8 km.     

Source Parameters of the 8 October, 2005 M<Subscript>w</Subscript>7.6 Kashmir Earthquake

During the last six years, the National Geophysical Research Institute, Hyderabad has established a semi-permanent seismological network of 5 broadband seismographs and 10 accelerographs in the Kachchh seismic zone, Gujarat, with the prime objective to monitor the continued aftershock activity of the 2001 M_w7.7 Bhuj mainshock. The reliable and accurate broadband data for the M_w 7.6 (8 Oct., 2005) Kashmir earthquake and its aftershocks from this network, as well as from the Hyderabad Geoscope station, enabled us to estimate the group velocity dispersion characteristics and the one-dimensional regional shear-velocity structure of peninsular India. Firstly, we measure Rayleigh- and Love-wave group velocity dispersion curves in the range of 8 to 35 sec and invert these curves to estimate the crustal and upper mantle structure below the western part of peninsular India. Our best model suggests a two-layered crust: The upper crust is 13.8-km thick with a shear velocity (Vs) of 3.2 km/s; the corresponding values for the lower crust are 24.9 km and 3.7 km/sec. The shear velocity for the upper mantle is found to be 4.65 km/sec. Based on this structure, we perform a moment tensor (MT) inversion of the bandpass (0.05–0.02 Hz) filtered seismograms of the Kashmir earthquake. The best fit is obtained for a source located at a depth of 30 km, with a seismic moment, Mo, of 1.6 × 10²⁷ dyne-cm, and a focal mechanism with strike 19.5°, dip 42°, and rake 167°. The long-period magnitude (M_A ~ M_w) of this earthquake is estimated to be 7.31. An analysis of well-developed sPn and sSn regional crustal phases from the bandpassed (0.02–0.25 Hz) seismograms of this earthquake at four stations in Kachchh suggests a focal depth of 30.8 km.     

2014年新疆于田MS7.3地震序列重定位及其发震构造初步研究

2014年2月12日在新疆于田县发生了M_S7.3地震,主震前一天在震区发生了M_S5.4前震,震后余震活动频繁,由于震区台站十分稀疏和不均匀、地壳速度结构复杂,台网常规定位结果精度有限,很难从中获得序列的空间分布特征和活动趋势的正确认识.本文首先利用位于震区附近的于田地震台5年记录的远震波形数据,采用接收函数方法研究了震区附近的地壳结构,建立了震源区的地壳速度模型.在此基础上,联合震相到时和方位角对2014年于田M_S7.3地震序列(从2014年02月11日-2014年04月30日,共计577次地震)进行了重新绝对定位.结果显示,(1) 重定位后的前震和主震震中位置明显向地表破裂带及其附近的阿尔金分支断裂(南肖尔库勒断裂和阿什库勒-肖尔库勒断裂)靠近,两者相距5.4 km,主震位置为36.076°N、82.576°E,震源深度为22 km, 前震位置为36.055°N、82.522°E,震源深度为19 km;(2) 本文重定位结果显示,余震序列沿NEE-SWW展布,优势分布长度约73 km、宽度约16 km,平均震源深度为14.8 km,其中77%的余震分布在地表破裂带的西南端,这部分余震中少数沿阿什库勒-肖尔库勒断裂分布,绝大多数沿北东东向的南肖尔库勒断裂分布,位于地表破裂带东北端的余震沿阿什库勒-肖尔库勒断裂分布,但发生在地表破裂带的余震极少;重定位后,位于地表破裂带西南侧的震中分布由台网目录的近南北向变为北东向,与地表破裂带、南肖尔库勒断裂和阿什库勒-肖尔库勒断裂走向一致;(3) 沿重定位剖面的地震分布,可推断位于地表破裂带西南段的南肖尔库勒断裂与位于北东段的阿什库勒-肖尔库勒断裂倾向反向,南肖尔库勒断裂的倾向为SE,阿什库勒-肖尔库勒断裂的倾向为NW,这与本次地震野外考察得到的断裂性质一致.综合重定位结果、地表破裂带分布、震源机制解、南肖尔库勒断裂和阿什库勒-肖尔库勒断裂的性质认为,2014年于田M_S7.3地震的发震构造为阿尔金断裂西南尾段的两条分支断裂——南肖尔库勒断裂和阿什库勒-肖尔库勒断裂.     

Moment tensor inversion and source rupture process of the September 27, 2003 <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>=7.9 earthquake occurred in the border area of China,Russia and Mongolia

We conducted moment tensor inversion and studied source rupture process for M _S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock distribution and the tectonic settings around the epicentral area, we propose that the M _S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of M _S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M ₀=0.97×10²⁰ N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the M _S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.     

基于区域地震波形的2017年新疆精河MS6.6地震破裂方向性及发震构造研究

2017年8月9日的新疆精河MS6.6地震是近年来天山北缘发生的最大地震,震中位于由多条逆冲断层组成的库松木契克断裂带内.由于震源较深、构造形变复杂、区域地震台站相对稀疏,仅根据震源机制解、余震分布和InSAR观测结果等难以直接判定发震构造.本文针对倾滑型地震发展了一种基于区域地震波形的破裂方向性测定方法,利用余震作为参考地震进行路径校正,根据主震和参考地震的波形时移差和Pn-Pg到时差分别确定主震在水平方向和深度方向的破裂尺度,进而推断同震破裂的延展方向和延伸尺度.本文在反演了主震的点源参数后,应用新发展的方法测定了地震的破裂方向性.点源反演结果显示,精河地震是一个发生在中地壳的高角度逆冲地震,矩震级约6.2,质心深度21km,震源持续时间5.5s,两个双力偶节面分别为102°/45°/106°(NP1)和259°/47°/74°(NP2).破裂方向性分析结果显示,地震的破裂面为南倾的NP1节面,地震沿着破裂起始点向西南方向、向下破裂,总破裂长度约11.5km,其中,沿深度的破裂范围约7km,沿水平的破裂范围约9km,平均破裂速度约2.1km·s-1.综合区域地质资料、卫星影像等判定本次地震的发震断层为精河南断层,地震可能只破裂了断层的下段(17~25km),并未破出地表.     

Source process of the 14 November 2001 western Kunlun Mountain <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>=8.1 earthquake

Based on digital teleseismic P-wave seismograms recorded by 28 long-period seismograph stations of the global seismic network, source process of the November 14, 2001 western Kunlun Mountain M _S=8.1 (M _W=7.8) earthquake is estimated by a new inversion method. The result shows that the earthquake is a very complex rupture event. The source rupture initiated at the hypocenter (35.95°N, 90.54°E, focal depth 10 km, by USGS NEIC), and propagated to the west at first. Then, in several minutes to a hundred minutes and over a large spatial range, several rupture growth points emerged in succession at the eastern end and in the central part of the finite fault. And then the source rupture propagated from these rupture growth points successively and, finally, stopped in the area within 50 km to the east of the centroid position (35.80°N, 92.91°E, focal depth 15 km, by Harvard CMT). The entire rupture lasted for 142 s, and the source process could be roughly separated into three stages: The first stage started at the 0 s and ended at the 52 s, lasting for 52 s and releasing approximately 24.4% of the total moment; The second stage started at the 55 s and ended at the 113 s, lasting for 58 s and releasing approximately 56.5% of the total moment; The third stage started at the 122 s and ended at the 142 s, lasting for 20 s and releasing approximately 19.1% of the total moment. The length of the ruptured fault plane is about 490 km. The maximum width of the ruptured fault plane is about 45 km. The rupture mainly occurred within 30 km in depth under the surface of the Earth. The average static slip in the underground rocky crust is about 1.2 m with the maximum static slip 3.6 m. The average static stress drop is about 5 MPa with the maximum static stress drop 18 MPa. The maximum static slip and the maximum stress drop occurred in an area within 50 km to the east of the centroid position.     

芦山MS7.0级地震余震序列重新定位及构造意义

利用四川省地震台网的震相数据和双差定位方法对芦山M_S7.0级地震及其余震序列进行了精确定位,根据余震分布确定了发震断层的位置和断层面的几何特征,并对余震活动进行了分析.结果显示,芦山M_S7.0级地震的震中位于30.28°N、102.99°E,震源深度为16.33 km.余震沿发震断层向主震两侧延伸,主要分布在长约32 km、宽约15~20 km、深度为5~24 km的范围内.地震破裂带朝西南方向扩展范围较大,东北方向略小,余震震级随时间迅速衰减.震源深度剖面清晰地显示出发震断层的逆冲破裂特征,推测发震断层为大川—双石断裂东侧约10 km的隐伏断层.该断层走向217°、倾向北西,倾角约45°,产状与大川—双石断裂相比略缓,它们同属龙门山前山断裂带的叠瓦状逆冲断层系.受发震断裂影响,部分余震沿大川—双石断裂分布,西北方向的余震延伸至宝兴杂岩体的东南缘,与汶川地震的破裂带之间存在50 km左右的地震空区,有可能成为未来发生强震的潜在危险区.     

近震全波形反演2017年九寨沟M7.0地震序列震源机制解

搜集了四川地震台网的波形资料,采用全波形反演2017年8月8日九寨沟M7.0地震序列震源机制解.反演结果显示,九寨沟主震矩震级为M_W6.36,震源深度为22 km,节面I走向为150°,倾角为80°,滑动角为-20°;节面Ⅱ走向为244°,倾角为70°,滑动角为-169°.余震主要分布在14~22 km深度范围内,震源机制以走滑型为主,其中正断型地震2个,逆冲型地震2个,走滑型地震24个,混合型地震8个.断层面优势方向为SSE向,与塔藏断裂和虎牙断裂走向基本一致,但与塔藏断裂最南段存在明显差异.倾角变化集中在60°~80°,滑动角主要分布在0°附近,表明九寨沟地震序列主要受SSE走向、近似直立的左旋走滑断层控制.P轴优势方位为SEE向,仰角主要分布在30°以内,与区域应力场基本一致.震源区的机制类型和应力状态均存在空间分段差异.本文推测此次九寨沟M7.0地震序列可能发生在虎牙断裂向北延伸的隐伏断裂上,但不排除地震引起了塔藏断裂南段和虎牙断裂以北隐伏断裂同时破裂的可能.     

STUDY ON SOURCE PARAMETERS OF THE 8 AUGUST 2017 M7.0 JIUZHAIGOU EARTHQUAKE AND ITS AFTERSHOCKS,NORTHERN SICHUAN

On August 8, 2017, a strong earthquake of M7.0 occurred in Jiuzhaigou County, Aba Prefecture, northern Sichuan. The earthquake occurred on a branch fault at the southern end of the eastern section of the East Kunlun fault zone. In the northwest of the aftershock area is the Maqu-Maqin seismic gap, which is in a locking state under high stress. Destructive earthquakes are frequent along the southeast direction of the aftershocks area. In Songpan-Pingwu area, only 50~80km away from the Jiuzhaigou earthquake, two M7.2 earthquakes and one M6.7 earthquake occurred from August 16 to 23, 1976. Therefore, the Jiuzhaigou earthquake was an earthquake that occurred at the transition part between the historical earthquake fracture gap and the neotectonic active area. Compared with other M7.0 earthquakes, there are few moderate-strong aftershocks following this Jiuzhaigou earthquake, and the maximum magnitude of aftershocks is much smaller than the main shock. There is no surface rupture zone discovered corresponding to the M7.0 earthquake. In order to understand the feature of source structure and the tectonic environment of the source region, we calculate the parameters of the initial earthquake catalogue by Loc3D based on the digital waveform data recorded by Sichuan seismic network and seismic phase data collected by the China Earthquake Networks Center. Smaller events in the sequence are relocated using double-difference algorithm; source mechanism solutions and centroid depths of 29 earthquakes with M_L≥3.4 are obtained by CAP method. Moreover, the source spectrum of 186 earthquakes with 2.0≤M_L≤5.5 is restored and the spatial distribution of source stress drop along faults is obtained. According to the relocations and focal mechanism results, the Jiuzhaigou M7.0 earthquake is a high-angle left-lateral strike-slip event. The earthquake sequence mainly extends along the NW-SE direction, with the dominant focal depth of 4~18km. There are few shallow earthquakes and few earthquakes with depth greater than 20km. The relocation results show that the distribution of aftershocks is bounded by the M7.0 main shock, which shows obvious segmental characteristics in space, and the aftershock area is divided into NW segment and SE segment. The NW segment is about 16km long and 12km wide, with scattered and less earthquakes, the dominant focal depth is 4~12km, the source stress drop is large, and the type of focal mechanism is complicated. The SE segment is about 20km long and 8km wide, with concentrated earthquakes, the dominant depth is 4~12km, most moderate-strong earthquakes occurred in the depth between 11~14km. Aftershock activity extends eastward from the start point of the M7.0 main earthquake. The middle-late-stage aftershocks are released intensively on this segment, most of them are strike-slip earthquakes. The stress drop of the aftershock sequence gradually decreases with time. Principal stress axis distribution also shows segmentation characteristics. On the NW segment, the dominant azimuth of P axis is about 91.39°, the average elevation angle is about 20.80°, the dominant azimuth of T axis is NE-SW, and the average elevation angle is about 58.44°. On the SE segment, the dominant azimuth of P axis is about 103.66°, the average elevation angle is about 19.03°, the dominant azimuth of T axis is NNE-SSW, and the average elevation angle is about 15.44°. According to the fault profile inferred from the focal mechanism solution, the main controlling structure in the source area is in NW-SE direction, which may be a concealed fault or the north extension of Huya Fault. The northwest end of the fault is limited to the horsetail structure at the east end of the East Kunlun Fault, and the SE extension requires clear seismic geological evidence. The dip angle of the NW segment of the seismogenic fault is about 65°, which may be a reverse fault striking NNW and dipping NE. According to the basic characteristics of inverse fault ruptures, the rupture often extends short along the strike, the rupture length is often disproportionate to the magnitude of the earthquake, and it is not easy to form a rupture zone on the surface. The dip angle of the SE segment of the seismogenic fault is about 82°, which may be a strike-slip fault that strikes NW and dips SW. The fault plane solution shows significant change on the north and south sides of the main earthquake, and turns gradually from compressional thrust to strike-slip movement, with a certain degree of rotation.     

Mapping three-dimensional co-seismic surface deformations associated with the 2015 <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript>7.2 Murghab earthquake based on InSAR and characteristics of crustal strain

Three-dimensional (3D) co-seismic surface deformations are of great importance to interpret the characteristics of coseismic deformations and to understand the geometries and dynamics of seismogenic faults. In this paper, we propose a method for mapping 3D co-seismic deformations based on InSAR observations and crustal strain characteristics. In addition, the search strategy of correlation points is optimized by adaptive correlation distance, which greatly improves the applicability of the proposed method in restoring deformations in decorrelation areas. Results of the simulation experiment reveal that the proposed method is superior to conventional methods in both the accuracy and completeness. The proposed method is then applied to map the 3D co-seismic surface deformations associated with the 2015 M_W7.2 Murghab earthquake using ascending and descending ALOS-2 PALSAR-2 images. The results show that the seismogenic fault is the Sarez-Karakul fault (SKF), which is dominated by NE-SW strike slips with an almost vertical dip angle. The north section and the south segment near the epicentre have obvious subsidence along with a southwestward motion in the northwest wall, and the southeast wall has northeast movement and surface uplift trend along the fault zone. The strain field of the earthquake is also obtained by the proposed method. It is found that the crustal block of the seismic area is obviously affected by dilatation and shear forces, which is in good agreement with the movement character of the sinistral slip.     

Focal mechanism and seismogenic structure of the Shiqu MS4.4 earthquake

The focal mechanism solution of the Shiqu M_S 4.4 earthquake occurred on May 16^th, 2017 in Sichuan Province is studied by the gCAP method using the waveform data from the regional seismic networks in Sichuan, Qinghai, Tibet and Gansu provinces. The strike/dip/dipping angle of the first nodal plane are 214°/80°/167° and those of the second nodal plane are 306°/77°/10°, the optimal centroid depth is 7.3 ​± ​0.6 ​km and the moment magnitude is M_W 4.5. Furthermore, the study investigates the robustness of the results against the error of crustal velocity structure, location, data quality and difference of seismic parameters, subsequently obtaining a stable resolved focal mechanism. According to the geological structure in the seismogenic area, spatial distribution of aftershock sequenceof the regional tectonic stress field, and the focal mechanism of the main shock, we suggest that the Shiqu earthquake is induced by a left-lateral strike-slip mechanism and the second nodal plane is inferred to be the seismogenic fault, consistent with the geometry of the Changshagongma fault which is the secondary fault of the northwest part of the Xianshuihe fault zone.     

九寨沟M_s7.0地震的InSAR观测及发震构造分析

2017年8月8日四川省九寨沟县发生M_s7.0地震.本文基于Sentinel-1 SAR影像,利用InSAR技术获取了此次地震的同震形变场,反演获得同震滑动分布,计算了同震位错对余震分布和周边断层的静态库仑应力变化,并对发震构造进行了分析讨论.结果表明:①InSAR同震形变场显示,九寨沟地震造成地表形变最大量级约为20 cm(雷达视线方向),同震形变存在非对称性分布特征.②同震位错以左旋走滑为主,主要发生在4~16 km深度,最大滑动量约为77 cm,位于9 km深处.反演得到的矩震级为Mw6.46.同震错动未破裂到地表.③大部分余震发生在库仑应力增加区.此次地震增加了震中周边地区一些断裂的库仑应力,如东昆仑断裂带东段、龙日坝断裂、虎牙断裂等.④东昆仑断裂东段的未来地震危险性值得关注.⑤九寨沟地震的发震断层为树正断裂,可能是虎牙断裂的北西延伸隐伏部分,此次地震是巴颜喀拉块体南东向运动受到华南块体的强烈阻挡过程中发生的一次典型构造事件.     

Coseismic Coulomb failure stress changes caused by the 2017 <Emphasis Type="Italic">M</Emphasis>7.0 Jiuzhaigou earthquake,and its relationship with the 2008 Wenchuan earthquake

On August 8, 2017, a M7.0 earthquake occurred in Jiuzhaigou County, Sichuan Province, China, resulting in significant casualties and property damage. Therefore, it is critical to identify the areas of potential aftershocks before reconstruction and re-settling people to avoid future disasters. Based on the elastic dislocation theory and a multi-layered lithospheric model, we calculate the Coulomb failure stress changes caused by the Wenchuan and Jiuzhaigou earthquakes, discuss the relationship between the M_w7.9 Wenchuan and M7.0 Jiuzhaigou earthquakes, and analyze the influence of the aftershock distribution and stress changes on the major faults in this region caused by the Jiuzhaigou earthquake. The co- and post-seismic stress changes caused by the Wenchuan earthquake significantly increased the stress accumulation at the hypocenter of the Jiuzhaigou earthquake. Therefore, the occurrence of the Jiuzhaigou earthquake was probably stimulated by the Wenchuan earthquake. The aftershock distribution is well explained by the co-seismic stress changes of the Jiuzhaigou earthquake. The stress accumulation and corresponding seismic hazard on the Maqu-Heye segment of the East Kunlun fault and the northern extremity of the Huya fault has been further increased by the Jiuzhaigou earthquake.     

High-resolution seismic tomography of the upper crust in the source region of the April 20, 2013 Lushan earthquake and its seismotectonic implications

Both P- and S-wave arrivals were collected for imaging upper crustal structures in the source region of the April 20, 2013 Lushan earthquake. High-resolution, three-dimensional P and S velocity models were constructed by travel-time tomography. Moreover, more than 3700 aftershocks of the Lushan earthquake were relocated via a grid search method. The P- and S-wave velocity images of the upper crust show largely similar characters, with high and low velocity anomalies, which mark the presence of significant lateral and vertical heterogeneity at the source region of the Lushan earthquake. The characteristics of the velocity anomalies also reflect the associated surface geological tectonics in this region. The distributions of high velocity anomalies of both P- and S-waves to 18 km depth are consistent with the distributions of relocated aftershocks, suggesting that most of the ruptures were localized inside the high velocity region. In contrast, low P and S velocities were found in the surrounding regions without aftershocks, especially in the region to the northeast of the Lushan earthquake. For the relocated aftershocks of the Lushan earthquake from this study, we found that most aftershocks were concentrated in a zone of about 40 km long and 20 km wide, and were located in the hanging wall of Dayi–Mingshan fault. The focal depths of aftershocks increase from the southeast to the northwest region in the direction perpendicular to the fault strike, suggesting that the fault ruptured at an approximate dip angle of 45°. The main depths of the aftershocks in the northwest of the main shock are significantly shallower than expected, revealing the different seismogenic conditions in the source region.     

Coseismic Coulomb failure stress changes caused by the 2017M7.0 Jiuzhaigou earthquake,and its relationship with the 2008Wenchuan earthquake

On August 8, 2017, a M7.0 earthquake occurred in Jiuzhaigou County, Sichuan Province, China, resulting in significant casualties and property damage. Therefore, it is critical to identify the areas of potential aftershocks before reconstruction and re-settling people to avoid future disasters. Based on the elastic dislocation theory and a multi-layered lithospheric model, we calculate the Coulomb failure stress changes caused by the Wenchuan and Jiuzhaigou earthquakes, discuss the relationship between the Mw7.9 Wenchuan and M7.0 Jiuzhaigou earthquakes, and analyze the influence of the aftershock distribution and stress changes on the major faults in this region caused by the Jiuzhaigou earthquake. The co-and post-seismic stress changes caused by the Wenchuan earthquake significantly increased the stress accumulation at the hypocenter of the Jiuzhaigou earthquake. Therefore,the occurrence of the Jiuzhaigou earthquake was probably stimulated by the Wenchuan earthquake. The aftershock distribution is well explained by the co-seismic stress changes of the Jiuzhaigou earthquake. The stress accumulation and corresponding seismic hazard on the Maqu-Heye segment of the East Kunlun fault and the northern extremity of the Huya fault has been further increased by the Jiuzhaigou earthquake.     

玉树MS7.1级地震部分余震重新定位及发震构造分析

综合利用玉树震区应急流动台站观测数据和青海地震台网固定台站观测数据,依据最新的人工地震宽角反射/折射剖面的速度模型,采用Hypo2000地震定位法,对2010年4月18日至4月29日期间玉树震区发生的部分余震进行了重新定位.重新定位后,震源位置的水平和垂直方向平均误差分别为1.35 km和4.68 km,走时残差为0.49 s.震源深度分布范围为1.48～19.85 km,平均震源深度为10.28 km.定位研究结果表明:玉树地震余震沿北西-南东向的甘孜-玉树断裂带的北支,即玉树-隆宝断裂分布,长约97 km.余震分布特征在主震(微观震中)两侧存在差异,可能反映了两侧构造特征存在差异.截止到4月29日,主震东南仍是应力的主要释放区域,余震强度大且活动密集的区域位于主震东南距主震约5 km、横向范围约20 km.主震破裂区的大部分应力在主震过程中得以释放,主震时应力未释放的区域成为主要的余震分布区.余震的连续发生可能已造成主震破裂区相互连通,且破裂范围向西北方向扩展.玉树主震及余震的发震构造为甘孜-玉树断裂的北支,即玉树-隆宝断裂段,断层性质为北东倾向的高角度左旋走滑断层.发震断层的倾角和宽度在帮洞两侧有所不同,帮洞以东发震断层宽度约为12 km,倾角约为83°;而帮洞以西发震断层宽度约为6.5 km,断层倾角约减缓为63°.     

2017年九寨沟7.0级地震断层破裂尺度初步研究

本文利用2017年九寨沟7.0级地震的余震序列数据,结合震源机制解确定的地震断层面,研究了地震断层的破裂尺度。基于余震序列在断层面上的投影,分析直接余震和间接余震以及不同起始震级条件下余震区的长度和震源深度分布,估算了地震断层破裂面的破裂长度和破裂深度,并探讨了地震断层破裂对地震烈度分布的影响。研究结果显示,九寨沟7.0级地震断层的破裂长度约33—35km,破裂深度约23—26km;地震断层破裂对Ⅷ度区分布有明显的控制作用,地震断层破裂长度接近Ⅷ度区的长度。     

Nemuro-Oki earthquake of June 17, 1973: A lithospheric rebound at the upper half of the interface

P-wave first motions, radiation patterns and amplitudes of long-period surface waves, relocated aftershock distributions, leveling and tsunami data indicate that the 1973 Nemuro-Oki earthquake is caused by a low-angle thrust-faulting, representing a rebound at the upper 50 km of the interface between the continental and oceanic lithospheres. Rebound, most likely aseismic, at depths below 50 km, is suggested to take place in the near future from a comparison of recent geologic crustal deformation with pre-seismic and co-seismic data. The estimated seismic moment is about $\text{1}\text{3}\text{–}\text{1}\text{4}$ of that for the neighboring great earthquakes. The macro-seismic data suggest that the 1973 earthquake is smaller than the 1894 Nemuro-Oki earthquake, the last great earthquake in this region.The 1973 earthquake had been predicted on the basis of a seismic gap. Although the prediction was successful as to the location and nature of the faulting and partly as to the occurrence time, it is smaller than the predicted one. A part of the seismic gap may still remain. The difference between the observed seismic slip (1.6 m) and that predicted on the basis of the pre-seismic crustal deformation (3.0 m) indicates either (1) the 1973 earthquake relieved only a part of the strain accumulated in the upper 50 km, or (2) a significant amount of aseismic slip took place on the seismic fault and completely relieved the accumulated strain in the focal region of the 1973 earthquake. If the former is the case, the remaining strain, not only in the focal region, but also in the remaining seismic gap adjoining it, may be relieved in a larger earthquake in the future.The source parameters obtained are as follows: fault plane, dip direction = N40°W, dip angle = 27°; seismic moment = 6.7 · 10²⁷ dyn cm; average slip dislocation, 1.6 m in N63°W direction; stress drop = 35 bars. In these calculations, the fault dimension and the rigidity are assumed to be 100 · 60 km² and 7.0 · 10¹¹ dyn/cm², respectively.     

2017年九寨沟MS7.0地震震源区速度结构与余震分布

采用九寨沟M_S7.0 （M_W6.5）地震的余震直达P波、S波走时数据,通过体波走时层析成像方法,获得了震源区及其邻区的P波和S波速度结构,并利用成像结果对余震进行了重定位。结果显示:余震主要集中分布于高、低速异常交界处偏低速异常一侧,呈走向NNW,倾向SW,倾角较高的分布特征;余震序列两侧的P波、S波速度结构揭示了发震断层两侧介质性质的差异,即上盘为刚性较强的高地震波速度区,下盘为刚性较弱的低地震波速度区。由余震分布特征和地震波速度结构推断:九寨沟地震发生在上地壳底部,发震断层具有上盘地震波速度高、下盘地震波速度低的特征;主震引起的后续破裂在上地壳内部的剧烈形变区内传播,破裂能量终止于25 km深度附近。