郯庐断裂带安徽明光段紫阳山探槽及其意义

郯庐断裂带安徽省内段落属于该断裂带的南段,断裂构造复杂,总体上断层活动性要弱于断裂带的山东、江苏段。近年来笔者多次在苏皖交界地区开展野外地质地貌调查,发现淮河南北两侧的地形地貌存在较大差异。本研究以淮河以南的郯庐断裂带东支断裂明光段为探查重点,在明光紫阳山北侧跨断层开挖地质探槽。探槽(Tc1)显示断层表现为逆冲、张裂等活动形式,且断层向上延伸错动晚第四纪地层;结合年代样品测试结果,表明该段断层晚第四纪以来有较强的活动,最新活动时代可达晚更新世-全新世早期;探槽揭露的断层表现出多种活动形式,显示了明光段断层活动的多期次性和区域构造应力场的复杂性。     

郯庐断裂带安徽紫阳山段发现全新世活动证据

安丘-莒县断裂(F_5)为郯庐断裂带中段东地堑内最新活动断裂。近年来,F_5江苏段研究成果丰硕,发现不同地段普遍存在全新世活动性,运动方式以右旋走滑兼挤压逆冲为主。以往研究未讨论过F_5在淮河以南安徽境内的延伸情况以及进一步的活动性问题。文中选取与F_5江苏段线性影像特征延伸一致的淮河南岸郯庐紫阳山段作为突破口,通过遥感影像解译、地质地貌调查和探槽开挖,初步得到以下认识:1)紫阳山段线性构造地貌特征清晰,断层发育于浮山至紫阳山一线的中生代红色砂岩隆起边缘缓坡,为安丘-莒县断裂(F_5)过淮河后的南延部分;2)朱刘探槽开挖揭示,该段错断了晚更新世晚期黏土层,晚更新世晚期—全新世早期黑色黏土层受断层活动影响沿断面灌入、填充,形成黑色断层条带及黑土充填楔,表明断层最新活动时代达全新世早期;3)朱刘探槽开挖揭示,该段第四纪以来存在至少3次古地震事件,第1次古地震事件推测年代为第四纪早、中期,第2次古地震事件年代为20.10~13.46ka BP,第3次古地震事件年代为(10.15±0.05)~(8.16±0.05)ka BP。上述研究成果弥补了对郯庐断裂带安徽段晚第四纪活动性认识的不足,为安徽省的地震监测和震害防御工作提供了基础数据。     

1976年龙陵地震区断裂活动性研究

研究了1976年龙陵7．3、7．4级地震震区内的龙陵-瑞丽断裂、怒江断裂和腾冲断裂的第四纪构造环境和断裂活动性，得出腾冲火山断裂带具有新生火山、断裂构造作用，并对龙陵-瑞丽断裂、怒江断裂等的活动性产生影响和改造。提出了这一活动构造带内小型北西-北北西向断裂是龙陵强震发震构造的观点。     

野马河—大雪山断裂肃北段晚第四纪活动特征研究

前人对野马河—大雪山断裂肃北段的晚第四纪活动特征研究相对薄弱,缺少有关断层最新活动的证据。本文在高分辨率遥感解译的基础上,对肃北断裂开展全段1∶5 000的地质地貌填图,通过探槽开挖、放射性碳(~(14)C)测年以及低空无人机摄影测量(small Unmanned Aerial Vehicles,简称sUAV)等工作,对该断裂晚第四纪活动性进行系统研究。发现肃北断裂为一条全新世的逆冲活动断裂,晚第四纪以来具有多期活动,西水沟探槽剖面揭示出2次古地震事件,古地震离逝时间为(4 192.5±97.5)a B.P.之后。     

郯庐断裂带淮河南到女山湖段晚第四纪以来的新活动

以郯庐断裂带淮河南到女山湖段晚第四纪以来是否具有新活动为主要研究目标,通过遥感影像资料解译及地表反复调查,选择构造地貌显著地段开挖探槽,识别和记录其变形形态,分析其活动习性,定向采集新活动变形物质,在保持原态基础上磨制定向薄片,并进行微观构造分析论证。研究表明,断裂沿线线状构造地貌清晰,横跨断裂带的3个探槽均揭示出晚第四纪以来活动痕迹,断裂最新错断了晚更新世-全新世地层;滑移方式多表现为粘滑,典型表现为断层陡坎、楔状堆积、断层和充填裂缝等,总体显示为脆性高速变形特征,属于史前地震遗迹。上述认识部分得到微观分析证实。文中还初步探讨了淮河南北郯庐断裂最新活动特征的异同点及其可能的原因。     

郯庐断裂带明光—定远池河镇段的新活动性

郯庐断裂带南段淮河至女山湖段落已被证实具有晚第四纪活动性,为进一步追踪断裂带在女山湖以南的活动情况,选取明光至定远池河镇段落进行遥感解译、地质地貌调查、探槽开挖及年代样品测试等工作。研究发现,该段断裂在卫星影像上显示线性特征较差,发育断裂主要为池河-太湖断裂;断裂新活动主要表现为控制池河河谷的发育及沿明南土山村、池河石塘岳、池河周王等地展布的线性岗状地貌;在上述岗地边缘开挖探槽揭示断裂在该段最新活动方式具挤压逆冲性质,最新活动时代为中更新世,晚更新世以来不活动。上述结果初步表明,该段与其北侧相邻的淮河至女山湖段在第四纪活动性上存在差异,可能为郯庐断裂带在女山湖附近存在分段导致。     

甘孜-玉树断裂带东南段晚第四纪活动性研究

以甘孜-玉树断裂带东南段的地质地貌为研究对象,在遥感解译的基础上,通过对典型地区的详细野外调查和探槽研究对该段晚第四纪活动性进行研究。在断裂沿线的生康乡、仁果乡、错阿乡、日阿乡进行了断错地貌分析和晚第四纪滑动速率计算, 生康区的水平滑动速率为(7.6±0.5)mm/a, 垂直滑动速率为(1.1±0.1)mm/a; 仁果区的水平滑动速率为(8.0±0.3)mm/a,垂直滑动速率为(1.1±0.1)mm/a; 错阿区的水平滑动速率为(10.3±0.4)mm/a; 日阿区的水平滑动速率为(10.8±0.8)mm/a, 垂直滑动速率为(1.1±0.1)mm/a。在仁果乡和错阿乡进行了探槽研究,两处探槽都揭示了多次古地震事件,虽然揭露的断层构造样式有所不同,但总体上都是以走滑为主兼有一定的逆冲分量。综合古地震事件和滑动速率分析表明,甘孜-玉树断裂带东南段晚第四纪尤其是全新世以来活动剧烈。     

青岛沧口断裂的地质构造特征与第四纪活动性研究

本文根据青岛市活断层探测与地震危险性评价项目初查阶段第四纪地层分析、遥感影像解译、地球化学探测、地质地貌调查与探槽开挖、浅层地震勘探与钻孔探测、地质年代测定等获得的丰富的第一手资料,对青岛沧口断裂的地质构造特征和第四纪活动性进行了详细分析与综合研究,结果表明:沧口断裂经历多期构造变动,是本区的重要断裂之一,它由多支断层组成,控制了中生代的火山活动、盆地沉积和岩浆侵入以及晚第四纪的盆地沉积、山体隆升和水系发育;第四纪以来,沧口断裂的主要活动发生于中更新世晚期至晚更新世早期,表现出中高角度向南东倾的逆冲活动特点,错断了上更新统底面1—6m,而最新活动时代为晚更新世中期,以走滑活动为主,垂直错距0.2—1.1m。     

青藏高原北缘三危山断裂晚更新世活动特征

三危山断裂位于青藏高原北缘,属于阿尔金断裂带向NW扩展的分支断裂,其最新的构造活动反映了青藏高原北部地区的构造演化及地震活动特征。文中通过遥感影像解译、野外实地调查和地质填图,对该断裂晚第四纪构造活动特征进行了研究。结果表明,三危山断裂发育于三危山西北麓,长约175km,断裂以左旋走滑为主,兼有逆断层性质,局部表现出正断层特征。其构造活动的地貌表现形式主要有:基岩陡坎、断层沟槽以及山包、冲沟左旋等。古地震探槽开挖揭示三危山断裂主要断错晚更新世地层,在距今(40.3±5.2)~(42.1±3.9)ka有过1次古地震活动,为1条晚更新世活动断裂。     

小江断裂带宜良盆地西缘断裂晚第四纪活动的地质地貌证据

据历史资料记载,云南宜良地区曾于公元1500年发生过一次M7地震,该地震发生在小江断裂带上,但对其具体发震断层及其地表破裂分布的确定,仍存有较大分歧。在高分辨率遥感影像解译基础上,沿宜良盆地西缘断裂进行了翔实的地质地貌调查,获得了该断裂晚第四纪活动的一些地质地貌证据。店房探槽和打挂村探槽组开挖结果揭示:宜良盆地西缘断裂断错了全新世地层,最新一次活动断错了(2 460±30)a BP的地层。结合断错地貌和地震破坏记录的分析,其最新事件可能对应于1500年宜良地震。     

龙陵-瑞丽断裂(南支)北段晚第四纪活动性特征

遥感影像解译和野外地质地貌调查表明,龙陵-瑞丽断裂(南支)北段是以左旋走滑为主兼张性正断的区域性活动断裂。根据一些断错地貌点的大比例尺填图、实地测量及其年代学分析,确定了该断裂为全新世活动断裂,断裂晚更新世以来的平均水平滑动速率为2.2mm/a,平均垂直滑动速率为0.6mm/a;全新世以来的平均水平滑动速率为1.8～3.0mm/a,平均垂直滑动速率为0.5mm/a。断裂晚更新世以来的滑动速率在不同的时间尺度上变化不大,反映了该断裂晚更新世以来的活动强度比较平稳     

畹町断裂晚第四纪活动与水系构造变形

畹町断裂位于滇西中缅交界地带,蚌冬以西走向近EW,以东走向NE,倾向N和NW,全长170km。最新考察发现,沿断裂新活动的断层地貌明显,表现为清晰的断层三角面、平直的断层槽地、断层陡崖、线性山脊、多级跌水等。断裂对第四纪盆地有着明显的控制作用,畹町、曼海等盆地呈串珠状沿断裂展布。龙镇大桥等地第四纪断层及高家寨洪积扇位错等揭示出畹町断裂切错了晚更新世堆积层,被错堆积层热释光年龄为(17.60±1.49)ka～(38.24±3.25)kaBP,表明断裂在晚第四纪有过明显活动。蚌冬一带怒江沿断裂展布,主河道被左旋位错了约9.5km并形成"发卡"型拐弯;公养河等6条河流及其支流均沿断裂发育,局部或整体河段受断裂控制明显,说明这些河段是在断裂新活动后沿断裂破碎带追踪侵蚀形成的。沿断裂多处可见水系同步左旋位错现象,如平子亭—公养河间有11条小溪同步左旋位错,中山—万马河一线有10余条水系表现出同步左旋位错。位错量可分为40～50m、90～100m、200～250m、300～400m和600～1100m5个量级;梳状水系发育。水系左旋位错、阶地及洪积扇等位错现象表明,断裂在晚第四纪以水平左旋走滑为主,滑动速率为1.7～2.2mm/a.。沿断裂曾发生多次中强地震,被认为是1976年龙陵7.3、7.4级地震的余震,但它们不是沿发震断层———龙陵-瑞丽断裂呈带状分布,而是集中于龙陵-瑞丽断裂与畹町断裂间南北长55km、东西宽32km的广阔区域。因此,推断这些余震的发生是龙陵-瑞丽断裂与畹町断裂相继活动所致。     

USING DEFORMED FLUVIALTERRACES OF THE QINGYIJIANG RIVER TO STUDY THE TECTONIC ACTIVITY OF THE SOUTHERN SEGMENT OF LONGMENSHAN FAULT ZONE

On 20 April 2013, a destructive earthquake, the Lushan M_S7.0 earthquake, occurred in the southern segment of the Longmenshan Fault zone, the eastern margin of the Tibetan plateau in Sichuan, China. This earthquake did not produce surface rupture zone, and its seismogenic structure is not clear. Due to the lack of Quaternary sediment in the southern segment of the Longmenshan fault zone and the fact that fault outcrops are not obvious, there is a shortage of data concerning the tectonic activity of this region. This paper takes the upper reaches of the Qingyijiang River as the research target, which runs through the Yanjing-Wulong Fault, Dachuan-Shuangshi Fault and Lushan Basin, with an attempt to improve the understanding of the tectonic activity of the southern segment of the Longmenshan fault zone and explore the seismogenic structure of Lushan earthquake. In the paper, the important morphological features and tectonic evolution of this area were reviewed. Then, field sites were selected to provide profiles of different parts of the Qingyijiang River terraces, and the longitudinal profile of the terraces of the Qingyijiang River in the south segment of the Longmenshan fault zone was reconstructed based on geological interpretation of high-resolution remote sensing images, continuous differential GPS surveying along the terrace surfaces, geomorphic field evidence, and correlation of the fluvial terraces. The deformed longitudinal profile reveals that the most active tectonics during the late Quaternary in the south segment of the Longmenshan Fault zone are the Yanjing-Wulong Fault and the Longmenshan range front anticline. The vertical thrust rate of the Yanjing-Wulong Fault is nearly 0.6~1.2mm/a in the late Quaternary. The tectonic activity of the Longmenshan range front anticline may be higher than the Yanjing-Wulong Fault. Combined with the relocations of aftershocks and other geophysical data about the Lushan earthquake, we found that the seismogenic structure of the Lushan earthquake is the range front blind thrust and the back thrust fault, and the pop-up structure between the two faults controls the surface deformation of the range front anticline.     

ANALYSIS OF EVOLUTION OF THE RIYUESHAN FAULT SINCE LATE PLEISTOCENE USING STRUCTURAL GEOMORPHOLOGY

The northeastern margin of Tibetan plateau is an active block controlled by the eastern Kunlun fault zone, the Qilian Shan-Haiyuan fault zone, and the Altyn Tagh fault zone. It is the frontier and the sensitive area of neotectonic activity since the Cenozoic. There are widespread folds, thrust faults and stike-slip faults in the northeastern Tibetan plateau produced by the intensive tectonic deformation, indicating that this area is suffering the crustal shortening, left-lateral shear and vertical uplift. The Riyueshan Fault is one of the major faults in the dextral strike-slip faults systems, which lies between the two major large-scale left-lateral strike-slip faults, the Qilian-Haiyuan Fault and the eastern Kunlun Fault. In the process of growing and expanding of the entire Tibetan plateau, the dextral strike-slip faults play an important role in regulating the deformation and transformation between the secondary blocks. In the early Quaternary, because of the northeastward expansion of the northeastern Tibetan plateau, tectonic deformations such as NE-direction extrusion shortening, clockwise rotation, and SEE-direction extrusion occurred in the northeastern margin of the Tibetan plateau, which lead to the left-lateral slip movement of the NWW-trending major regional boundary faults. As the result, the NNW-trending faults which lie between these NWW direction faults are developed. The main geomorphic units developed within the research area are controlled by the Riyueshan Fault, formed due to the northeastward motion of the Tibet block. These geomorphic units could be classified as:Qinghai Lake Basin, Haiyan Basin, Datonghe Basin, Dezhou Basin, and the mountains developed between the basins such as the Datongshan and the Riyueshan. Paleo basins, alluvial fans, multiple levels of terraces are developed at mountain fronts. The climate variation caused the formation of the geomorphic units during the expansion period of the lakes within the northeastern Tibetan plateau. There are two levels of alluvial fans and three levels of fluvial terrace developed in the study area, the sediments of the alluvial fans and fluvial terraces formed by different sources are developed in the same period. The Riyueshan Fault connects with the NNW-trending left-lateral strike-slip north marginal Tuoleshan fault in the north, and obliquely connects with the Lajishan thrust fault in the south. The fault extends for about 180km from north to south, passing through Datonghe, Reshui coal mine, Chaka River, Tuole, Ketu and Xicha, and connecting with the Lajishan thrusts near the Kesuer Basin. The Riyueshan Fault consists of five discontinuous right-step en-echelon sub-fault segments, with a spacing of 2~3km, and pull-apart basins are formed in the stepovers. The Riyueshan Fault is a secondary fault located in the Qaidam-Qilian active block which is controlled by the major boundary faults, such as the East Kunlun Fault and the Qilian-Haiyuan Fault. Its activity characteristics provide information of the outward expansion of the northeastern margin of Tibet. Tectonic landforms are developed along the Riyueshan Fault. Focusing on the distinct geomorphic deformation since late Pleistocene, the paper obtains the vertical displacement along the fault strike by RTK measurement method. Based on the fault growth-linkage theory, the evolution of the Riyueshan Fault and the related kinetic background are discussed. The following three conclusions are obtained:1)According to the characteristics of development of the three-stage 200km-long steep fault scarp developed in the landforms of the late Pleistocene alluvial fans and terraces, the Riyueshan Fault is divided into five segments, with the most important segment located in the third stepover(CD-3); 2)The three-stage displacement distribution pattern of the Riyueshan Fault reveals that the fault was formed by the growths and connections of multiple secondary faults and is in the second stage of fault growth and connection. With CD-3 as the boundary, the faults on the NW side continue to grow and connect; the fault activity time on the SE side is shorter, and the activity intensity is weaker; 3)The extreme value of the fault displacement distribution curve indicates the location of strain concentration and stress accumulation. With the stepover CD-3 as the boundary, the stress and strain on NW side are mainly concentrated in the middle and fault stepovers. The long-term accumulation range of stress on the SE side is relatively dispersed. The stress state may be related to the counterclockwise rotation inside the block under the compression of regional tectonic stress.     

鄂西北两郧断裂郧西段的第四纪活动与地震危险性

两郧断裂带是鄂西北地区规模最大、影响最强的断裂之一,位于秦岭断块隆起区,长约200 km,走滑运动性质,第四纪分段活动特征明显,曾于1964年发生过郧西4.9级地震。此前对该断裂郧西段的第四纪活动研究较少,直接影响着对鄂西北地区活动构造变形格局和强震危险性的整体认识和评估。本文基于遥感解译、野外地质调查和高密度电法勘探研究,发现断裂沿线发育有串珠状盆地、负向断层长谷、断层垭口和断层崖等构造地貌形态。两陨断裂在早第四纪活动明显,晚第四纪以来活动微弱,滑动速率低,未来中强地震的危险性不容低估。      

滇西北通甸-巍山断裂中段的晚第四纪滑动速率

通甸-巍山断裂属于红河断裂带的分支断裂,目前对该断裂中段的晚第四纪活动特征研究较少。野外地质地貌调查和年代学研究结果表明,通甸-巍山断裂中段是以右旋走滑运动为主,兼有张性正断的全新世活动断裂,其最新活动时代距今约2.2ka。晚更新世中晚期以来断裂中段平均水平滑动速率为1.25mm/a,全新世晚期以来垂直运动趋于增强。该研究不仅为该断裂的地震危险性评价工作提供了基础资料,而且有助于理解川滇菱形块体西南边界构造变形的空间分配特点     

EVIDENCE OF HOLOCENE ACTIVITY DISCOVERED IN ANHUI ZIYANGSHAN SEGMENT OF TANLU FAULT ZONE

Anqiu-Juxian Fault(F₅) is the latest active fault in the eastern graben of the middle segment of the Tanlu fault zone. In recent years, the research results of F₅ in Jiangsu Province are abundant, and it is found that Holocene activity is prevalent in different segments, and the movement pattern is dominated by dextral strike-slip and squeezing thrust. The Anhui segment and the Jiangsu segment of the Tan-Lu fault zone are bounded by the Huaihe River. Previous studies have not discussed the extension and activity of F₅ in the south of the Huaihe River in Anhui Province. This paper chooses the Ziyangshan segment of Tanlu fault zone in the south of the Huaihe River as the breakthrough point, which is consistent with the linear image feature of extension of F₅ in Jiangsu Province. Through the remote sensing image interpretation, geological and geomorphological investigation and trench excavation, we initially get the following understanding:(1)The linear structural features of the Ziyang segment are clear, and the fault is developed on the gentle slope of the Mesozoic red sandstone uplift along the Fushan-Ziyangshan, which is the southern extension of the Anqiu-Juxian Fault(F₅); (2)The excavation of the Zhuliu trench reveals that the late Pleistocene clastic layers are interrupted, and the late late Pleistocene to early Holocene black clay layers are filled along the fault to form black fault strips and black soil-filled wedges, indicating that the latest active age of the fault is early Holocene; (3)The excavation of Zhuliu trench reveals that there are at least 3 paleo-earthquake events since the Quaternary, the first paleo-seismic event is dated to the early and middle Quaternary, and the 2nd paleo-seismic event is 20.10~13.46ka BP, the age of the third paleo-seismic event is(10.15±0.05)~(8.16±0.05)ka BP. These results complement our understanding of the late Quaternary activity in the Anhui segment of the Tanlu fault zone, providing basic data for earthquake monitoring and seismic damage prevention in Anhui Province.     

LATE QUATERNARY ACTIVITY OF THE CENTRAL SEGMENT OF THE DARI FAULT AND RESTUDY OF THE SURFACE RUPTURE ZONE OF THE 1947 M73/4 DARI EARTHQUAKE,QINGHAI PROVINCE

Bayan Hara Block is one of the most representative active blocks resulting from the lateral extrusion of Tibet Plateau since the Cenozoic. Its southern and northern boundary faults are characterized by typical strike-slip shear deformation. Its eastern boundary is blocked by the Yangze block and its horizontal movement is transformed into the vertical movement of the Longmen Shan tectonic belt, leading to the uplift of the Longmen Shan Mountains and forming a grand geomorphic barrier on the eastern margin of the Tibet Plateau. A series of large earthquakes occurred along the boundary faults of the Bayan Hara Block in the past twenty years, which have attracted attention of many scholars. At present, the related studies of active tectonics on Bayan Hara Block are mainly concentrated on the boundary faults, such as Yushu-Ganzi-Xianshuihe Fault, East Kunlun Fault and Longmen Shan Fault. However, there are also some large faults inside the block, which not only have late Quaternary activity, but also have tectonic conditions to produce strong earthquake. These faults divide the Bayan Hara Block into some secondary blocks, and may play important roles in the kinematics and dynamics mechanism of the Bayan Hara Block, or even the eastern margin of the Tibet Plateau. The Dari Fault is one of the left-lateral strike-slip faults in the Bayan Hara Block. The Dari Fault starts at the eastern pass of the Kunlun Mountains, extends eastward through the south of Yalazela, Yeniugou and Keshoutan, the fault strike turns to NNE direction at Angcanggou, then turns to NE direction again at Moba town, Qinghai Province, and the fault ends near Nanmuda town, Sichuan Province, with a total length of more than 500km. The fault has been considered to be a late Quaternary active fault and the 1947 M73/4 Dari earthquake was produced by its middle segment. But studies on the late Quaternary activity of the Dari Fault are still weak. The previous research mainly focused on the investigation of the surface rupture and damages of the 1947 M73/4 Dari earthquake. However, there were different opinions about the scale of the M73/4 earthquake surface rupture zone. Dai Hua-guang(1983)thought that the surface rupture of the earthquake was about 150km long, but Qinghai Earthquake Agency(1984)believed that the length of surface rupture zone was only 58km. Based on interpretation of high-resolution images and field investigations, in this paper, we studied the late Quaternary activity of the Dari Fault and the surface rupture zone of the 1947 Dari earthquake. Late Quaternary activity in the central segment of the Dari Fault is particularly significant. A series of linear tectonic landforms, such as fault trough valley, fault scarps, fault springs and gully offsets, etc. are developed along the Dari Fault. And the surface rupture zone of the 1947 Dari earthquake is still relatively well preserved. We conducted a follow-up field investigation for the surface rupture zone of the 1947 Dari earthquake and found that the surface rupture related to the Dari earthquake starts at Longgen village in Moba town, and ends near the northwest of the Yilonggounao in Jianshe town, with a length of about 70km. The surface rupture is primarily characterized by scarps, compressional ridges, pull-apart basins, landslides, cleavage, and the coseismic offset is about 2~4m determined by a series of offset gullies. The surface rupture zone extends to the northwest of Yilonggounao and becomes ambiguous. It is mainly characterized by a series of linear fault springs along the surface rupture zone. Therefore, we suggest that the surface rupture zone of the 1947 Dari earthquake ends at the northwest of Yilonggounao. In summary, the central segment of the Dari Fault can be characterized by strong late Quaternary activity, and the surface rupture zone of the 1947 Dari earthquake is about 70km long.     

东昆仑断裂东段下热尔断裂活动特征初步研究

下热尔断裂位于巴颜喀拉块体东北边界变形带即东昆仑断裂带东段与迭部-白龙江断裂2条剪切断裂之间挤压变形带内,在空间上属于“玛曲空段”范围.经野外考察及遥感资料验证,确定下热尔断裂走向为310°,长度约为20km,运动学特征表现为左旋走滑为主兼少量倾滑分量,沿断裂发育大量断错地貌,水平位移主要分布在3.5～5m,而未发现垂向断错地貌;垂直断裂走向开挖2处探槽,揭示断层切穿晚第四纪地层,被地表沼泽相泥炭层覆盖,结合相关地层年龄资料,初步得出平均水平滑动速率约为6.3mm/a.该断裂在几何学与运动学方面与东昆仑断裂带具有较好的一致性,推测两者之间存在一定相关性,属于东昆仑断裂带走滑断裂体系内的一条次级断裂或过渡性断裂.