新丰江水库中上地壳P波三维速度结构特征及库水的渗透影响

利用震源位置和速度结构的联合反演得到2007年6月—2014年7月新丰江水库地区地震序列的震源位置及中上地壳P波三维速度结构模型,并进一步研究库区序列分布及速度结构特征.结果显示:库区中上地壳不同深度P波速度存在显著横向不均匀性,浅部库区速度高于周缘,在5~10 km上地壳从库坝下游白田至库尾锡场NW方向存在高速异常体以及2个低速间断区域,低速间断区分别位于人字石断裂与南山—坳头断裂交汇处以及1962年6.1级地震震源区,库水可能沿低速间断区的人字石断裂、石角—新港—白田断裂下渗至13~14 km的地壳.在10~14 km地壳以NE走向的大坪—岩前断裂为界,NW侧为最高速度6.2 km·s~(-1)的高速区域,SE侧从库区中部回龙至库坝下游白田为显著低速异常区域,是可能的库水渗透影响区域,亦是库区中强地震集中区.库区地震多发生在高速体内部、高低速过渡带或低速的渗水通道两侧.     

青藏高原北缘地区上地幔P波速度结构

本文利用长周期P波波形资料,通过拟合理论地震图的方法研究了青藏高原北缘东侧区和西侧区的上地幔P波速度结构。结果表明,在这两个区域的上地幔结构中均存在P波低速层,且盖层的厚度较薄,在405km和670km深处均有P波速度的一级间断面。在670km深处这两个地区的速度结构仍有差异。     

三峡水库坝址及邻区中上地壳P波速度结构

利用三峡地震台网的到时资料,采用地震层析成像技术重建了三峡水库坝址及邻区中上地壳P波三维速度图像,深部构造研究结果是：（1）黄陵背斜岩性均匀完整、固结程度高,高速异常到20km深度依然可见,形状随深度变化．（2）秭归盆地沉积厚度不均匀,最厚处约6km．（3）结晶基底顶面在0～7km、底面在14～16km．（4）黄陵背斜与秭归盆地之间及附近区域和培石附近区域深部存在上地幔部分熔融物质,现今构造发展与演化与上地幔熔融物质冷却固化过程密切相关．（5）九湾溪断裂东西两侧地区地壳深部构造的速度结构不同,是三峡地区重力梯度带成因需要考虑的因素．（6）库水渗透作用对地壳浅层速度结构产生影响．     

青藏高原中东部地壳和上地幔顶部P波层析成像

为获取青藏高原中东部地壳和上地幔顶部的精细结构,本文基于1万4 484条天然地震的P波（Pg和Pn）到时数据,对青藏高原中东部地壳和上地幔顶部进行P波三维速度结构层析成像,获取了该区域内地壳P波、上地幔顶部Pn波的速度结构和地壳厚度信息。层析成像结果显示,青藏高原中东部地壳P波速度范围为5.2—7.2 km/s,上地幔顶部Pn波速度范围为7.7—8.4 km/s,地壳厚度范围为48.0—68.6 km,地壳和上地幔顶部存在强烈的横向不均匀性,与地质块体分布有较好的对应关系。地壳P波速度结构显示,研究区中、下地壳分布有较大范围的低速区,上地壳与中下地壳P波分布存在明显的差异:羌塘地块和巴颜喀拉地块在上地壳主要表现为高速异常,随着深度增加逐渐表现为低速异常;而柴达木地块在上地壳主要表现为低速异常,下地壳则表现为高速异常;柴达木地块和拉萨地块在上地幔顶部表现为较高的Pn波速度,最高约为8.4 km/s,而在巴颜喀拉地块和羌塘地块东部,Pn波总体上表现为低速,最低约为7.7 km/s。研究区内地壳厚度的总体特征表现为南厚北薄,其中羌塘地块东部和拉萨地块的地壳较厚,而柴达木地块和巴颜喀拉地块东部的地壳相对较薄,羌塘地块西部存在局部的地壳变薄现象,反映了印度板块对欧亚板块北向俯冲作用下的岩石圈变形特征。      

新疆天山中段地壳和上地幔顶部P波速度结构研究

天山造山带一直以来是研究盆山耦合作用的理想场所,深入理解这一地区的壳幔结构对认识天山造山带深部动力学过程具有重要意义.本研究基于2009—2020年新疆区域数字地震台网固定台站、震后架设应急流动台站以及部分宽频带流动地震台站记录到的M_S≥1.5地震到时资料,采用双差地震层析成像方法反演获得了新疆天山中段精细的地壳和上地幔顶部三维P波速度结构和地震震源参数.结果显示：新疆天山中段具有复杂的深浅构造关系,地壳浅部及上地壳P波速度结构与地表地质构造密切相关,高速异常区对应于天山造山带,低速异常区对应于沉积盆地.研究区中东段中地壳和下地壳存在较大范围低速区,与两侧准噶尔盆地和塔里木盆地上地壳和中地壳低速区相连,且准噶尔盆地和塔里木盆地下地壳及上地幔顶部双向均向新疆天山中段下方倾斜.结合前人诸多研究成果推测,在南北向构造挤压作用下,塔里木盆地与准噶尔盆地双向向天山造山带壳幔岩石圈发生“层间插入与俯冲削减”.重定位后地震分布显示,地震震源深度优势范围为0～25 km,主要沿断裂带、盆山结合部以及不同块体接触部位分布,且与壳内低速体有较好的相关性.这些结果可能为研究新疆天山中段...     

四川芦山MS7.0地震震源区及其周边区域P波三维速度结构研究

利用四川数字地震台网和流动地震台站在芦山M_S7.0地震震后(2013年4月20日—6月23日)记录到的2026次区域地震事件的28188条P波到时资料,采用地震层析成像方法反演得到了芦山地震震源区及其周边区域中上地壳P波三维速度结构. 结果表明,浅部地壳的P波速度异常分布特征与地表地质构造、 地形和岩性密切相关,即成都断陷盆地表现出与第四纪沉积有关的低速异常区;犍为、 乐山一带的川中微升区和川青块体龙门山以西的邻近地带均表现为与构造抬升有关的高速异常;宝兴、 康定附近分布的基性火山岩及火山碎屑岩均呈局部高速异常分布. 芦山地震震源位于高低速异常分界线附近且偏向高速体一侧,其下方存在明显的低速异常分布,可能与流体的存在有关. 流体的作用导致中上地壳内部发震层的弱化,使孕震断层易于破裂,可能对芦山地震起到了触发作用. 芦山地震与汶川地震两次地震的余震密集区相距50 km,这50 km地震空区震源体的深度范围附近目前正处于高速异常区内,加之龙门山断裂带西南段又具有比较典型的断错地貌发育,使得该段地震空区(大邑—邛崃活动断裂破裂空段)现在所处的深浅部构造环境变得复杂,其潜在的地震危险性仍值得进一步关注.      

西藏高原地壳上地幔P波和S波速度结构

利用西藏高原及其邻区150个地震,西藏台网、四川台网、世界标准台网及在西藏布设的流动台网的 P 波和 S 波观测资料,得出了该地区的地壳和上地幔的 P 波以及 S 波的速度模型:(1)地壳平均厚度70km,可分为明显的两层.上层厚16km,P 波速度5.55km/s,S 波3.25km/s;下层厚54km,P 波速度6.52km/s,S 波3.76km/s;(2)上地幔顶层 P 波速度7.97m/s,S 波4.55km/s.140km 处出现低速层,层厚约55——62km.低速层下的正速度梯度与地幔顶部盖层相差无几.      

南北地震带岩石圈S波速度结构面波层析成像

本文利用天然地震面波记录和层析成像方法,研究了南北地震带及邻近区域的岩石圈S波速度结构和各向异性特征.结果表明南北地震带的东边界不但是地壳厚度剧变带,也是地壳速度的显著分界.其西侧中下地壳的S波速度显著低于东侧,强震大多发生在低速区内部和边界.青藏高原东缘中下地壳速度显著低于正常大陆地壳,在松潘甘孜地块和川滇地块西部大约25～45 km深度存在壳内低速层;这些低速特征与高原主体的低速区相连,有利于下地壳物质的侧向流动.地壳的各向异性图像与下地壳流动模式相符,即下地壳物质绕喜马拉雅东构造结运动,东向的运动遇到扬子坚硬地壳阻挡而变为向南和向北东的运动.面波层析成像结果支持青藏高原地壳运动的下地壳流动模型.南北地震带的岩石圈厚度与其东侧的扬子和鄂尔多斯地块相似但速度较低.川滇西部地块上地幔顶部(莫霍面至88 km左右)异常低速;松潘甘孜地块上地幔盖层中有低速夹层(约90～130 km深度).岩石圈上地幔的速度分布图像与地壳显著不同,在高原主体与川滇之间存在北北东向高速带,可能会阻挡地幔物质的东向运动.上地幔各向异性较弱且与地壳的分布图像显然不同.因此青藏高原岩石圈地幔的构造运动具有与地壳不同的模式,软弱的下地壳提供了壳幔运动解耦的条件.     

青藏高原东南缘地壳结构及云南鲁甸、景谷地震深部孕震环境

通过联合解释青藏高原东南缘地区Rayleigh波群速度频散和固定地震台站的远震接收函数,构建了青藏东南缘3维地壳剪切波速度模型。结果表明研究区地壳结构具有强烈的横向不均一性。该区地壳厚度变化强烈(30~65km),其总体趋势是东南浅、西北深。研究显示该区存在2个明显的壳内低速异常带,其中中地壳(15~20km)低速带主要分布在腾冲、川滇菱形块体内部;而25~40km深度范围的中、下地壳低速带主要出现在研究区的北部,而在四川盆地和研究区南部则普遍缺失。鲁甸地震所在地震带的上地壳表现为高速异常,中、下地壳范围内存在2个显著的壳内低速带。鲁甸地震主震及其多数余震分布在高速的上地壳之中。与之不同,景谷地震序列及其所在思茅-普洱地震带下方没有显著的壳内低速带的出现,但其上地壳则表现为S波低速异常,该上地壳低速异常可能与地壳强烈破碎及断层/微裂隙中的流体有关。     

利用远震P波接收函数研究漾濞MS6.4地震孕震环境

2021年5月21日我国云南省大理州漾濞县发生了MS6.4级破坏性地震,该地震的深部孕震环境研究对理解其成因极为重要.本文利用滇西北地区 68个密集地震台站记录的远震波形数据,提取 P波接收函数,采用两步反演法和Bootstrap重采样统计技术,获取了滇西北地区精细的地壳上地幔 80 km深度范围内的 S波速度结构.结合前期所得地壳厚度与泊松比分布情况分析认为:滇西北地区地壳 S波速度结构在横向上和垂向上都具有强烈的非均匀性,浅表约有4 km厚的低速沉积层,中上地壳呈高低速相间分布特征;20～40 km深度范围内存在低速层,分布在维西—乔后—巍山断裂与红河断裂两侧.从横向上看,漾濞地震发生在维西—乔后—巍山断裂西侧的高低速过渡地区和泊松比高梯度带上.从垂直剖面上看,漾濞地震发生在中下地壳具有明显低速层、而上覆为相对高速的脆性地壳中,震源区地壳内存在的低速体为此次漾濞地震提供了可能的孕震环境.滇西北地区的中下地壳低速层被断层限制在特定的区域内,且该地区存在莫霍面隆起中心、非常高的泊松比值(＞0.3)以及上地幔低速异常,考虑到高热流、地幔高导层隆起、温泉幔源特征等综合分析推测低速体可能与地幔热物质上涌有关.     

P wave velocity structure of upper and middle crust beneath the Three Gorges reservoir dam and adjacent regions

The three-dimensional P wave velocity structures of upper and middle crust beneath the Three Gorges reservoir dam and adjacent regions were reconstructed by means of the seismic tomography, using the absolute P-arrivals from the events observed by the Three Gorges seismic network. Our preliminary study of the deep structure shows: (1) the lithology of the Huangling anticline, integral and highly solidified, exhibits a uniformity. Down to a depth of 20 km, the Huangling anticline still shows high-velocity anomalies. Note that the characteristics of the velocity images with the different depths are not the same; (2) the depth of the sedimentary rocks beneath the entire Zigui basin is not constant, which is less than 6 km; (3) the top boundary of the crystalline basement varies from 0 to 7 km, whereas the bottom one between 14 and 16 km; (4) the partially molten substances of the upper mantle are located in the Badong-Zigui and its adjacent regions as well as nearby Peishi area. The development and evolution of the current tectonics are associated with the cooling and solidifying process of the molten substances within the upper mantle; (5) the different velocity structures of the deep crust in both east and west side of the Jiuwanxi fault are to be investigated in order to understand the origin of gravitational gradient zone in the Three Gorge areas; and (6) the velocities within the upper crust would be affected by reservoir water permeability. Supported by National Natural Science Foundation of China (Grant No. 40574039), National Key Technology R& D Program (Grant No. 2008BAC38B02)     

三峡水库坝址及邻区中上地壳S波速度结构

利用三峡数字地震台网记录的Sg波到时资料,采用地震层析成像技术,重建了三峡水库坝址及邻区中上地壳的三维速度图象,研究了地壳深部构造,主要结论是:①黄陵背斜的岩性具有固结程度高、岩体均匀完整、埋藏深度至少达14 km的特征;②秭归盆地与边缘构造由于岩层一致,而速度结构相同;构造变形的强度决定了秭归盆地及周缘区域沉积层的厚...     

利用背景噪声成像技术反演陕西及邻区地壳剪切波速度结构

利用地震背景噪声层析成像技术处理陕西及邻区所布设的257个宽频带台站的连续背景噪声数据,采用基于射线追踪的面波频散直接反演方法获得陕西及邻区地壳(6～39 km)高分辨率剪切波速度结构。成像结果显示:(1)渭河盆地顶部形成于新生代,厚的沉积层造成其浅部显著的低速异常,盆地中、上地壳为低速结构。渭河盆地与南北两侧地质构造单元交界区域的下方存在高速与低速结合带,以及在块体间相互运动的作用下,在块体内部,特别是界带深部可能存在着物质与能量的强烈交换,为渭河盆地及邻区的地震孕育发生提供深部环境。(2)南鄂尔多斯块体并不是一个均匀的整体,块体地壳浅层东薄西厚的低速异常结构,可能与鄂尔多斯自显生宙以来的整体掀斜,以及晚白垩纪以来差异性整体抬升和受强烈而不均匀的剥蚀有关。块体中地壳速度比上地壳和下地壳较高。壳内不存在显著的低速体,说明壳内低速体并没有贯穿整个鄂尔多斯地块。我们推测南鄂尔多斯块体仍保留着稳定克拉通的属性,其地壳结构可能反映了克拉通早期形成时的结构特征,至今还未遭受明显改造。(3)秦岭造山带东,西深部结构存在显著差异,具有分段分区的特征。造山带中地壳速度较高,可能因在板块碰撞和造山过程中,下地壳物质被抬升进入中地壳,从而造成中地壳速度偏高。     

A PRELIMINARY STUDY ON UPPER CRUSTAL VELOCITY STRUCTURE IN THE THREE GORGES RESERVOIR AREA

In this paper, using the double difference tomography method, the P wave and S wave velocity structures of the earth's crust beneath the Three Gorges Reservoir are inversed based on the high-resolution seismic data of seismological stations recorded from March 2009 to December 2010. According to the research results, the P wave and S wave crust velocity zones in the Three Gorges Reservoir area show a high V_P value area and a V_S value area with value low in the lower part and high in the upper part, distributing respectively at both sides of Shennongxi River to western Xietan in the north of Badong and near the outlet of the Xiangxi River at the northern section on Xiannvshan Fault. In the region from the two sides of Shennong River in the north of Badong to the western Xietan, microseisms are distributed in three zones in near east-west direction, with steep and north-dipping sections, spreading along the high-to-low velocity transition zone of the P and S wave. On the northern section of Xiannvshan Fault, small earthquakes are distributed along the NNW-trending Xiannvshan Fault, and the geological section reveals a steep and linear distribution along the transitional zone between the high V_P value area and the V_S value that is low in the upper and high in the lower part. Joint inversion results show a good consistency of the planes of the microseisms with the distribution of active faults.     

Shear Wave Velocity Structure of the Sinai Peninsula from Rayleigh Wave Analysis

The lithospheric structure of the Sinai Peninsula is shown by means of nine shear velocity profiles for depths ranging from zero to 50 km, determined from the Rayleigh wave analysis. The traces of 30 earthquakes, which occurred from 1992 to 1999 in and around the study area, have been used to obtain Rayleigh wave dispersion. These earthquakes were registered by a broadband station located in Egypt (KEG station). The dispersion curves were obtained for periods between 3 and 40 s, by digital filtering with a combination of MFT and TVF filtering techniques. After that, all seismic events were grouped in source zones to obtain a dispersion curve for each source-station path. These dispersion curves were inverted according to generalized inversion theory, to obtain shear wave velocity models for each source-station path, which is the main goal of this study. The shear velocity structure obtained for the Sinai Peninsula is shown through the shear velocity distributions with depth. These results agree well with the geology and other geophysical results, previously obtained from seismic and gravity data. The obtained velocity models suggest the existence of lateral and vertical heterogeneity. The shear velocity increases generally with depth for all paths analyzed in the study area. Nevertheless, in some paths a small low velocity channel in the upper or lower crust occurs. Along these profiles, it is found that the crustal structure of the Sinai Peninsula consists of three principal layers: upper crust with a sedimentary layer and lower crust. The upper crust has a sedimentary cover of 2 km thick with an average S-velocity of 2.53 km/s. This upper crust has a variable thickness ranging from 12 to 18 km, with S-wave velocity ranging from 3.24 to 3.69 km/s. The Moho discontinuity is located at a depth of 30 km, which is reflected by a sharp increase in the S-velocity values that jump from 3.70–4.12 to 4.33–4.61 km/s.     

腾冲火山区的地震层析成像及其构造意义

利用滇西南临时台网和固定台站的地震数据反演了腾冲及邻近地区的P波速度结构,着重分析了腾冲火山区和龙陵7级地震震源区的地壳结构特点.研究结果表明,腾冲火山区下方10～20 km深度范围存在明显的低速区,其横向尺度大约在20～30 km之间;推测这一低速区代表了仍处于活动状态的壳内岩浆源,热流通道有可能通过腾冲断裂延伸至地...     

Velocity structure and active fault of Yanyuan-Mabian seismic zone―The result of high-resolution seismic refraction experiment

The authors processed the seismic refraction Pg-wave travel time data with finite difference tomography method and revealed velocity structure of the upper crust on active block boundaries and deep features of the active faults in western Sichuan Province. The following are the results of our investigation. The upper crust of Yanyuan basin and the Houlong Mountains consists of the superficial low-velocity layer and the deep uniform high-velocity layer, and between the two layers, there is a distinct, and gently west-dipping structural plane. Between model coordinates 180-240 km, P-wave velocity distribution features steeply inclined strip-like structure with strongly non-uniform high and low velocities alternately. Xichang Mesozoic basin between 240 and 300 km consists of a thick low-velocity upper layer and a high-velocity lower layer, where lateral and vertical velocity variations are very strong and the interface between the two layers fluctuates a lot. The Daliang Mountains to the east of the 300 km coordinate is a non-uniform high-velocity zone, with a superficial velocity of approximately 5 km/s. From 130 to 150 km and from 280 to 310 km, there are extremely distinct deep anomalous high-velocity bodies, which are supposed to be related with Permian magmatic activity. The Yanyuan nappe structure is composed of the superficial low-velocity nappe, the gently west-dipping detachment surface and the deep high-velocity basement, with Jinhe-Qinghe fault zone as the nappe front. Mopanshan fault is a west-dipping low-velocity zone, which extends to the top surface of the basement. Anninghe fault and Zemuhe fault are east-dipping, tabular-like, and low-velocity zones, which extend deep into the base-ment. At a great depth, Daliangshan fault separates into two segments, which are represented by drastic variation of velocity structures in a narrow strip: the west segment dips westward and the east segment dips eastward, both stretching into the basement. The east margin fault of Xichang Mesozoic basin features a strong velocity gradient zone, dipping southwestward and stretching to the top surface of the basement. The west-dipping, tabular-like, and low-velocity zone at the easternmost segment of the profile is a branch of Mabian fault, but the reliability of the supposition still needs to be confirmed by further study. Anninghe, Zemuhe and Daliangshan faults are large active faults stretching deep into the basement, which dominate strong seismic activities of the area.     

Velocity structure and active fault of Yanyuan-Mabian seismic zone—The result of high-resolution seismic refraction experiment

The authors processed the seismic refraction Pg-wave travel time data with finite difference tomography method and revealed velocity structure of the upper crust on active block boundaries and deep features of the active faults in western Sichuan Province. The following are the results of our investigation. The upper crust of Yanyuan basin and the Houlong Mountains consists of the superficial low-velocity layer and the deep uniform high-velocity layer, and between the two layers, there is a distinct, and gently west-dipping structural plane. Between model coordinates 180–240 km, P-wave velocity distribution features steeply inclined strip-like structure with strongly non-uniform high and low velocities alternately. Xichang Mesozoic basin between 240 and 300 km consists of a thick low-velocity upper layer and a high-velocity lower layer, where lateral and vertical velocity variations are very strong and the interface between the two layers fluctuates a lot. The Daliang Mountains to the east of the 300 km coordinate is a non-uniform high-velocity zone, with a superficial velocity of approximately 5 km/s. From 130 to 150 km and from 280 to 310 km, there are extremely distinct deep anomalous high-velocity bodies, which are supposed to be related with Permian magmatic activity. The Yanyuan nappe structure is composed of the superficial low-velocity nappe, the gently west-dipping detachment surface and the deep high-velocity basement, with Jinhe-Qinghe fault zone as the nappe front. Mopanshan fault is a west-dipping low-velocity zone, which extends to the top surface of the basement. Anninghe fault and Zemuhe fault are east-dipping, tabular-like, and low-velocity zones, which extend deep into the basement. At a great depth, Daliangshan fault separates into two segments, which are represented by drastic variation of velocity structures in a narrow strip: the west segment dips westward and the east segment dips eastward, both stretching into the basement. The east margin fault of Xichang Mesozoic basin features a strong velocity gradient zone, dipping southwestward and stretching to the top surface of the basement. The west-dipping, tabular-like, and low-velocity zone at the easternmost segment of the profile is a branch of Mabian fault, but the reliability of the supposition still needs to be confirmed by further study. Anninghe, Zemuhe and Daliangshan faults are large active faults stretching deep into the basement, which dominate strong seismic activities of the area. Supported by the National Basic Research Program of China (Grant No. 2004CB428400)     

Tomographic inversion for the three-dimensional seismic velocity structure of the Aswan region,Egypt

The Thurber iterative simultaneous inversion program is used to determine the three-dimensionalP-wave velocity structure in the Aswan seismic region of Egypt. The tomographic inversion presented in this study is based on 1131P-phase observations at 13 stations from 89 local earthquakes, all of which occurred within the Kalabsha fault zone. The assumed initial velocity model is that deduced from local explosion experiments. The results indicate that the Aswan region is characterized by a heterogeneous crust, consisting of a shallow, low-velocity zone and a deeper high-velocity anomaly. Seismic velocity structure within the shallow part demonstrates that the inferred change in velocity exists primarily across the east-west trending Kalabsha fault scarp, whereas the high-velocity zone is located south of this fault. Two well-resolved, low-velocity zones appear within the upper 6 km of the crust. The first coincides with a graben structure located between the Kalabsha and Seiyal faults and the second exists between the N-S Kurkur fault and the main axis of Lake Aswan. Both low-velocity zones occupy an area of approximately 30×40 km, located along the western bank of the lake. The most significant result of this study is that the location of the deeper, high-velocity anomaly coincides with the concentration of seismic activity in the lower crustal layer.     

新丰江库区上地壳三维细结构层析成像

在新丰江库区布设一个范围约50 km×40 km、由50个地震临时台站组成的观测台阵,接收来自不同方位的人工震源产生的莫霍界面反射波;台阵中的20个台站和5个区域固定台还对2009年3月至2010年5月发生在库区的地方震进行了观测.本文联合利用人工地震莫霍面反射波走时和天然地震直达波走时,采用连续模型反演技术重建了库区上地壳P波、S波慢度扰动和V_p/V_s扰动分布图像.研究结果表明:新丰江库区东、西部地区上地壳结构存在明显的差异.库区东部地区构造复杂,多条断裂在该区呈交叉状分布.北西向的石角-新港-白田断裂带在库区段内具有复杂的岩性和构造特征,该断裂带在新港至双塘一线可能延伸至地下8 km左右;近北东向的断裂带切割地壳较深.峡谷区及大坝以东附近地区存在上、下贯通的波速比高值区,尤其是大坝以西的深水峡谷区,存在一条顺河走向的陡倾角断层裂隙带,为库水渗透提供了良好通道.库区西部地区为相对稳定构造区,完整坚硬的花岗岩体透水性能较差,受库水渗透影响很小.新丰江水库诱发地震的形成与深部构造环境密切相关.峡谷区及大坝以东附近地区上地壳介质性质呈现明显的横向不均匀性,微震分布在介质物性结构的特定部位,"软"、"硬"交错的介质环境是倾滑正断层型微小震产生的可能原因.