Estimating winter evaporation in boreal forests with operational snow course data

Snow course measurements from 11 sites located in eastern and northern Finland were used to estimate the total interception evaporation of a winter season for different forest categories. We categorized the sites based on forest density and tree species. Results showed that interception loss from gross precipitation increased with forest density and approached 30% for a forest with the highest density class. Interception loss for the most common forest density class was 11%. Interception losses were slightly larger in spruce forests than in pine, deciduous, or mixed forests. We provide suggestions as to how to design snow surveys to estimate wintertime interception evaporation better. Rough terrain and transition zones between forest and open areas should be avoided. Since evaporation fraction was strongly dependent on tree crown characteristics, snow course data should include direct estimates of canopy closure. Qualitative observations made by different observers should be given a reference frame to ensure comparability of records from different sites. Copyright © 2003 John Wiley & Sons, Ltd.     

Subgrid variability of snow water equivalent at operational snow stations in the western USA

The spatial distribution of snow water equivalent (SWE) is a key variable in many regional‐scale land surface models. Currently, the assimilation of point‐scale snow sensor data into these models is commonly performed without consideration of the spatial representativeness of the point data with respect to the model grid‐scale SWE. To improve the understanding of the relationship between point‐scale snow measurements and surrounding areas, we characterized the spatial distribution of snow depth and SWE within 1‐, 4‐ and 16‐km² grids surrounding 15 snow stations (snowpack telemetry and California snow sensors) in California, Colorado, Wyoming, Idaho and Oregon during the 2008 and 2009 snow seasons. More than 30 000 field observations of snowpack properties were used with binary regression tree models to relate SWE at the sensor site to the surrounding area SWE to evaluate the sensor representativeness of larger‐scale conditions. Unlike previous research, we did not find consistent high biases in snow sensor depth values as biases over all sites ranged from 74% overestimates to 77% underestimates. Of the 53 assessments, 27 surveys indicated snow station biases of less than 10% of the surrounding mean observed snow depth. Depth biases were largely dictated by the physiographic relationship between the snow sensor locations and the mean characteristics of the surrounding grid, in particular, elevation, solar radiation index and vegetation density. These scaling relationships may improve snow sensor data assimilation; an example application is illustrated for the National Operational Hydrologic Remote Sensing Center National Snow Analysis SWE product. The snow sensor bias information indicated that the assimilation of point data into the National Operational Hydrologic Remote Sensing Center model was often unnecessary and reduced model accuracy. Copyright © 2012 John Wiley & Sons, Ltd.     

Snow disappearance timing is dominated by forest effects on snow accumulation in warm winter climates of the Pacific Northwest,United States

Forests modify snow processes and affect snow water storage as well as snow disappearance timing. However, forest influences on snow accumulation and ablation vary with climate and topography and are therefore subject to temporal and spatial variability. We utilize multiple years of snow observations from across the Pacific Northwest, United States, to assess forest–snow interactions in the relatively warm winter conditions characteristic of maritime and transitional maritime–continental climates. We (a) quantify the difference in snow magnitude and disappearance timing between forests and open areas and (b) assess how forest modifications of snow accumulation and ablation combine to determine whether snow disappears later in the forest or in the open. We find that snow disappearance timing at 12 (out of 14) sites ranges from synchronous in the forest and open to snow persisting up to 13 weeks longer in the open relative to a forested area. By analyzing accumulation and ablation rates up to the day when snow first disappears from the forest, we find that the difference between accumulation rates in the open and forest is larger than the difference between ablation rates. Thus, canopy snow interception and subsequent loss, rather than ablation, set up longer snow duration in the open. However, at two relatively windy sites (hourly average wind speeds up to 8 and 17 m/s), differential snow disappearance timing is reversed: Snow persists 2–5 weeks longer in the forest. At the windiest sites, accumulation rates in the forest and open are similar. Ablation rates are higher in the open, but the difference between ablation rates in the forest and open at these sites is approximately equivalent to the difference at less windy sites. Thus, longer snow retention in the forest at the windiest sites is controlled by depositional differences rather than by reduced ablation rates. These findings suggest that improved quantification of forest effects on snow accumulation processes is needed to accurately predict the effect of forest management or natural disturbance on snow water resources.     

Comparison of Snow Data Assimilation System with GPS reflectometry snow depth in the Western United States

In this study, we compare gridded snow depth estimates from the Snow Data Assimilation System (SNODAS) with snow depth observations derived from GPS interferometric reflectometry (GPS‐IR) from roughly 100 Plate Boundary Observatory sites in the Western United States spanning four water‐years (2010–2013). Data from these sites are not assimilated by SNODAS; thus, GPS‐IR measurements provide an independent data set to evaluate SNODAS. Our results indicate that at 80% of the sites, SNODAS and GPS‐IR snow depth agree to better than 15‐cm root mean square error, with correlation coefficients greater than 0.6. Significant differences are found between GPS‐IR and SNODAS for sites that are distant from other point measurements, are located in complex terrain or are in areas with strong vegetation heterogeneities. GPS‐IR estimates of snow depth are shown to provide useful error characterization of SNODAS products across much of the Western United States and may have potential as an additional data assimilation source that could help improve SNODAS estimates. © 2014 The Authors. Hydrological Processes published by John Wiley & Sons Ltd.     

Potential of time‐lapse photography of snow for hydrological purposes at the small catchment scale

Time‐lapse photography provides an attractive source of information about snow cover characteristics, especially at the small catchment scale. The objective of this study was to design and test a monitoring system, which allows multi‐resolution observations of snow cover characteristics. The main aim was to simultaneously investigate the spatio‐temporal patterns of snow cover, snow depth and snowfall interception in the area very close to the camera, and the spatio‐temporal patterns of snow cover in the far range. The multi‐resolution design was tested at three sites in the eastern part of the Austrian Alps (Hochschwab‐Rax region). Digital photographs were taken at hourly time steps between 6:00 and 18:00 in the period November, 2004 to December, 2006. The results showed that the time‐lapse photography allows effective mapping of the snow depths at high temporal resolution in the region close to the digital camera at many snow stake locations. It is possible to process a large number of photos by using an automatic procedure for accurate snow depth readings. The digital photographs can also be used to infer the settling characteristics of the snow pack and snow interception during the day. Although it is not possible to directly estimate the snow interception mass, the photos may indeed give very useful information on the snow processes on and beneath the forest canopy. The main advantage of using time‐lapse photography in the far range of the digital camera is to observe the spatio‐temporal patterns of snow cover over different landscape configurations. The results illustrate that digital photographs can be very useful for parameterising processes such as sloughing on steep slopes, snow deposition in gullies and snow erosion on mountain ridges in a distributed snow model. Copyright © 2011 John Wiley & Sons, Ltd.     

Vegetation structure controls on snow and soil moisture in restored ponderosa pine forests

Thinning of semi-arid forests to reduce wildfire risk is believed to improve forest health by increasing soil moisture. Increased snowpack, reduced transpiration and reduced rainfall interception are frequently cited mechanisms by which reduced canopy density may increase soil moisture. However, the relative importance of these factors has not been rigorously evaluated in field studies. We measured snow depth, snow water equivalent (SWE) and the spatial and temporal variation in soil moisture at four experimental paired treatment-control thinning sites in high elevation ponderosa pine forest northern Arizona, USA. We compared snow and soil moisture measurements with forest structure metrics derived from aerial imagery and 3-dimensional lidar data to determine the relationship between vegetation structure, snow and soil moisture throughout the annual hydrologic cycle. Soil moisture was consistently and significantly higher in thinned forest plots, even though the treatments were performed 8–11 years before this study. However, we did not find evidence that SWE was higher in thinned forests across a range of snow conditions. Regression tree analysis of soil moisture and vegetation structure data provided some evidence that localized differences in transpiration and interception of precipitation influence the spatial pattern of soil moisture at points in the annual hydrologic cycle when the system is becoming increasingly water limited. However, vegetation structure explained a relatively low amount of the spatial variance (R² < 0.23) in soil moisture. Continuous measurements of soil moisture in depth profiles showed stronger attenuation of soil moisture peaks in thinned sites, suggesting differences in infiltration dynamics may explain the difference in soil moisture between treatments as opposed to overlying vegetation alone. Our results show limited support for commonly cited relationships between vegetation structure, snow and soil moisture and indicate that future research is needed to understand how reduction in tree density alters soil hydraulic properties.     

Modelling forest snow processes with a new version of WaSiM

ABSTRACT

We present a new model extension for the Water balance Simulation Model, WaSiM, which features (i) snow interception and (ii) modified meteorological conditions under coniferous forest canopies, complementing recently developed model extensions for particular mountain hydrological processes. Two study areas in Austria and Germany are considered in this study. To supplement and constrain the modelling experiments with on-site observations, a network of terrestrial time-lapse cameras was set up in one of these catchments. The spatiotemporal patterns of snow depth inside the forest and at the adjacent open field sites were recorded along with snow interception dynamics. Comparison of observed and modelled snow cover and canopy interception indicates that the new version of WaSiM reliably reconstructs the variability of snow accumulation for both the forest and the open field. The Nash-Sutcliffe efficiency computed for selected runoff events in spring increases from ?0.68 to 0.71 and 0.21 to 0.87, respectively.     

Estimation of winter leaf area index and sky view fraction for snow modelling in boreal coniferous forests: consequences on snow mass and energy balance

Leaf area index (LAI) and canopy coverage are important parameters when modelling snow process in coniferous forests, controlling interception and transmitting radiation. Estimates of LAI and sky view factor show large variability depending on the estimation method used, and it is not clear how this is reflected in the calculated snow processes beneath the canopy. In this study, the winter LAI and sky view fraction were estimated using different optical and biomass‐based approximations in several boreal coniferous forest stands in Fennoscandia with different stand density, age and site latitude. The biomass‐based estimate of LAI derived from forest inventory data was close to the values derived from the optical measurements at most sites, suggesting that forest inventory data can be used as input to snow hydrological modelling. Heterogeneity of tree species and site fertility, as well as edge effects between different forest compartments, caused differences in the LAI estimates at some sites. A snow energy and mass balance model (SNOWPACK) was applied to detect how the differences in the estimated values of the winter LAI and sky view fraction were reflected in simulated snow processes. In the simulations, an increase in LAI and a decrease in sky view fraction changed the snow surface energy balance by decreasing shortwave radiation input and increasing longwave radiation input. Changes in LAI and sky view fraction affected directly snow accumulation through altered throughfall fraction and indirectly snowmelt through the changed surface energy balance. Changes in LAI and sky view fraction had a greater impact on mean incoming radiation beneath the canopy than on other energy fluxes. Snowmelt was affected more than snow accumulation. The effect of canopy parameters on evaporation loss from intercepted snow was comparable with the effect of variation in governing meteorological variables such as precipitation intensity and air temperature. Copyright © 2012 John Wiley & Sons, Ltd.     

Observations of late winter Canadian tundra snow cover properties

Tundra snow cover is important to monitor as it influences local, regional, and global‐scale surface water balance, energy fluxes, as well as ecosystem and permafrost dynamics. Observations are already showing a decrease in spring snow cover duration at high latitudes, but the impact of changing winter season temperature and precipitation on variables such as snow water equivalent (SWE) is less clear. A multi‐year project was initiated in 2004 with the objective to quantify tundra snow cover properties over multiple years at a scale appropriate for comparison with satellite passive microwave remote sensing data and regional climate and hydrological models. Data collected over seven late winter field campaigns (2004 to 2010) show the patterns of snow depth and SWE are strongly influenced by terrain characteristics. Despite the spatial heterogeneity of snow cover, several inter‐annual consistencies were identified. A regional average density of 0.293 g/cm³ was derived and shown to have little difference with individual site densities when deriving SWE from snow depth measurements. The inter‐annual patterns of SWE show that despite variability in meteorological forcing, there were many consistent ratios between the SWE on flat tundra and the SWE on lakes, plateaus, and slopes. A summary of representative inter‐annual snow stratigraphy from different terrain categories is also presented. © 2013 Her Majesty the Queen in Right of Canada. Hydrological Processes. © 2013 John Wiley & Sons, Ltd.     

Influence of canopy density on snow distribution in a temperate mountain range

We analyse spatial variability and different evolution patterns of snowpack in a mixed beech–fir stand in the central Pyrenees. Snow depth and density were surveyed weekly along six transects of contrasting forest cover during a complete accumulation and melting season; we also surveyed a sector unaffected by canopy cover. Forest density was measured using the sky view factor (SVF) obtained from digital hemispherical photographs. During periods of snow accumulation and melting, noticeable differences in snow depth and density were found between the open site and those areas covered by forest canopy. Principal component analysis provided valuable information in explaining these observations. The results indicate a high variability in snow accumulation within forest areas related to differences in canopy density. Maximum snow water equivalent (SWE) was reduced by more than 50% beneath dense canopies compared with clearings, and this difference increased during the melting period. We also found significant temporal variations: when melting began in sectors with low SVF, most of the snow had already thawed in areas with high SVF. However, specific conditions occasionally produced a different response of SWE to forest cover, with lower melting rates observed beneath dense canopies. The high values of correlation coefficients for SWE and SVF (r > 0·9) indicate the reliability of predicting the spatial distribution of SWE in forests when only a moderate number of observations are available. Digital hemispherical photographs provide an appropriate tool for this type of analysis, especially for zenith angles in the range 35–55 . Copyright © 2007 John Wiley & Sons, Ltd.     

Relating snow dynamics and balsam fir stand characteristics,Montmorency Forest,Quebec

Snow water equivalent was measured during three springs on north‐ and south‐exposed sites representing a range of stand structure and development stages of Quebec's balsam fir forest. Maximum snow water equivalent of the season, mean seasonal snowmelt rate, snowmelt season duration and total snowmelt season degree‐day factor were related to canopy height, canopy density, light interception fraction and basal area of the stands using random coefficient models. Seasonal mean snowmelt rate was better explained by stand characteristics (R² from 0·41 to 0·61) than was maximum snow water equivalent (R² from 0·08 to 0·23). The best relationship was found with light interception, which explained 61% of snowmelt rate variability between stands. These relationships were not significantly affected by stand aspect (Pr ≥ S = 0·14 or higher), as snow dynamics seemed less dependent on aspect than on stand characteristics. Snowmelt recovery rates could be used by forest planners to establish an acceptable time step for the harvesting of different parts of a watershed in order to prevent peak flow augmentations. Copyright © 2005 John Wiley & Sons, Ltd.     

Estimating the snow water equivalent from snow depth measurements in the Swiss Alps

The snow water equivalent (SWE) characterizes the hydrological significance of snow cover. However, measuring SWE is time-consuming, thus alternative methods of determining SWE may be useful. SWE can be calculated from snow depth if the bulk snow density is known. Thus, a reliable estimation method of snow densities could (a) potentially save a lot of effort by, at least partly, sampling snow depth instead of SWE, and would (b) allow snow hydrological evaluations, when only snow depth data are available. To generate a useful parameterization of the bulk density a large dataset was analyzed covering snow densities and depths measured biweekly over five decades at 37 sites throughout the Swiss Alps. Four factors were identified to affect the bulk snow density: season, snow depth, site altitude, and site location. These factors constitute a convenient set of input variables for a snow density model developed in this study. The accuracy of estimating SWE using our model is shown to be equivalent to the variability of repeated SWE measurements at one site. The technique may therefore allow a more efficient but indirect sampling of the SWE without necessarily affecting the data quality.     

Long‐term investigations of the snow cover in a subalpine semi‐forested catchment

To improve spring runoff forecasts from subalpine catchments, detailed spatial simulations of the snow cover in this landscape is obligatory. For more than 30 years, the Swiss Federal Research Institute WSL has been conducting extensive snow cover observations in the subalpine watershed Alptal (central Switzerland). This paper summarizes the conclusions from past snow studies in the Alptal valley and presents an analysis of 14 snow courses located at different exposures and altitudes, partly in open areas and partly in forest. The long‐term performance of a physically based numerical snow–vegetation–atmosphere model (COUP) was tested with these snow‐course measurements. One single parameter set with meteorological input variables corrected to the prevailing local conditions resulted in a convincing snow water equivalent (SWE) simulation at most sites and for various winters with a wide range of snow conditions. The snow interception approach used in this study was able to explain the forest effect on the SWE as observed on paired snow courses. Finally, we demonstrated for a meadow and a forest site that a successful simulation of the snowpack yields appropriate melt rates. Copyright © 2006 John Wiley & Sons, Ltd.     

Charred forests accelerate snow albedo decay: parameterizing the post‐fire radiative forcing on snow for three years following fire

As large, high‐severity forest fires increase and snowpacks become more vulnerable to climate change across the western USA, it is important to understand post‐fire disturbance impacts on snow hydrology. Here, we examine, quantify, parameterize, model, and assess the post‐fire radiative forcing effects on snow to improve hydrologic modelling of snow‐dominated watersheds having experienced severe forest fires. Following a 2011 high‐severity forest fire in the Oregon Cascades, we measured snow albedo, monitored snow, and micrometeorological conditions, sampled snow surface debris, and modelled snowpack energy and mass balance in adjacent burned forest (BF) and unburned forest sites. For three winters following the fire, charred debris in the BF reduced snow albedo, accelerated snow albedo decay, and increased snowmelt rates thereby advancing the date of snow disappearance compared with the unburned forest. We demonstrate a new parameterization of post‐fire snow albedo as a function of days‐since‐snowfall and net snowpack energy balance using an empirically based exponential decay function. Incorporating our new post‐fire snow albedo decay parameterization in a spatially distributed energy and mass balance snow model, we show significantly improved predictions of snow cover duration and spatial variability of snow water equivalent across the BF, particularly during the late snowmelt period. Field measurements, snow model results, and remote sensing data demonstrate that charred forests increase the radiative forcing to snow and advance the timing of snow disappearance for several years following fire. Copyright © 2016 John Wiley & Sons, Ltd.     

Evaluating the utility of the EUMETSAT HSAF snow recognition product over mountainous areas of eastern Turkey

Abstract

Monitoring snow parameters (e.g. snow-cover area, snow water equivalent) is challenging work. Because of its natural physical properties, snow strongly affects the evolution of weather on a daily basis and climate on a longer time scale. In this paper, the snow recognition product generated from the MSG-SEVIRI images within the framework of the Hydrological Satellite Facility (HSAF) Project of EUMETSAT is presented. Validation of the snow recognition product H10 was done for the snow season (from 1 January to 31 March) of the water year 2009. The MOD10A1 and MOD10C2 snow products were also used in the validation studies. Ground truth of the products was obtained by using 1890 snow depth observations from 20 meteorological stations, which are mainly located in mountainous areas and are distributed across the eastern part of Turkey. The possibility of 37% cloud cover reduction was obtained by merging 15-min observations from MSG-SEVIRI as opposed to using only one daily observation from MODIS. The coarse spatial resolution of the H10 product gave higher commission errors compared to the MOD10A1 product. Snow depletion curves obtained from the HSAF snow recognition product were compared with those derived from the MODIS 8-day snow cover product. The preliminary results show that the HSAF snow recognition product, taking advantage of using high temporal frequency measurement with spectral information required for snow mapping, significantly improves the mapping of regional snow-cover extent over mountainous areas.

Citation Surer, S. and Akyurek, Z., 2012. Evaluating the utility of the EUMETSAT HSAF snow recognition product over mountainous areas of eastern Turkey. Hydrological Sciences Journal, 57 (8), 1–11.     

Representation of canopy snow interception,unloading and melt in a parsimonious snowmelt model

Recent improvements in the Utah Energy Balance (UEB) snowmelt model are focused on snow–vegetation–atmosphere interactions to understand how different types of vegetation affect snow processes in the mountains of Western USA. This work presents field work carried out in the Rocky Mountains of Northern Utah to evaluate new UEB model algorithms that represent the processes of canopy snow interception, sublimation, mass unloading and melt. Four years' continuous field observations showed generally smaller accumulations of snow beneath the forest canopies in comparison with open (sage and grass) areas, a difference that is attributed to interception and subsequent sublimation and redistribution of intercepted snow by wind, much of it into surrounding open areas. Accumulations beneath the denser forest (conifer) canopies were found to be less than the accumulation beneath the less dense forest (deciduous) canopies. The model was able to represent the accumulation of snow water equivalent in the open and beneath the deciduous forest quite well but without accounting for redistribution tended to overestimate the snow water equivalent beneath the conifer forest. Evidence of redistribution of the intercepted snow from the dense forest (i.e. conifer forest) to the adjacent area was inferred from observations. Including a simple representation of redistribution in the model gave satisfactory prediction of snow water equivalent beneath the coniferous forest. The simulated values of interception, sublimation and unloading were also compared with previous studies and found in agreement. Copyright © 2013 John Wiley & Sons, Ltd.     

Improvement of snow depth retrieval for FY3B-MWRI in China

The primary objective of this work is to develop an operational snow depth retrieval algorithm for the FengYun3B Microwave Radiation Imager(FY3B-MWRI)in China.Based on 7-year(2002–2009)observations of brightness temperature by the Advanced Microwave Scanning Radiometer-EOS(AMSR-E)and snow depth from Chinese meteorological stations,we develop a semi-empirical snow depth retrieval algorithm.When its land cover fraction is larger than 85%,we regard a pixel as pure at the satellite passive microwave remote-sensing scale.A 1-km resolution land use/land cover(LULC)map from the Data Center for Resources and Environmental Sciences,Chinese Academy of Sciences,is used to determine fractions of four main land cover types(grass,farmland,bare soil,and forest).Land cover sensitivity snow depth retrieval algorithms are initially developed using AMSR-E brightness temperature data.Each grid-cell snow depth was estimated as the sum of snow depths from each land cover algorithm weighted by percentages of land cover types within each grid cell.Through evaluation of this algorithm using station measurements from 2006,the root mean square error(RMSE)of snow depth retrieval is about 5.6 cm.In forest regions,snow depth is underestimated relative to ground observation,because stem volume and canopy closure are ignored in current algorithms.In addition,comparison between snow cover derived from AMSR-E and FY3B-MWRI with Moderate-resolution Imaging Spectroradiometer(MODIS)snow cover products(MYD10C1)in January 2010 showed that algorithm accuracy in snow cover monitoring can reach 84%.Finally,we compared snow water equivalence(SWE)derived using FY3B-MWRI with AMSR-E SWE products in the Northern Hemisphere.The results show that AMSR-E overestimated SWE in China,which agrees with other validations.     

Determination of snow water equivalent over the eastern part of Turkey using passive microwave data

Information on regional snow water equivalent (SWE) is required for the management of water generated from snowmelt. Modeling of SWE in the mountainous regions of eastern Turkey, one of the major headwaters of Euphrates–Tigris basin, has significant importance in forecasting snowmelt discharge, especially for optimum water usage. An assimilation process to produce daily SWE maps is developed based on Helsinki University of Technology (HUT) model and AMSR‐E passive microwave data. The characteristics of the HUT emission model are analyzed in depth and discussed with respect to the extinction coefficient function. A new extinction coefficient function for the HUT model is proposed to suit models for snow over mountainous areas. Performance of the modified model is checked against the original, other modified cases and ground truth data covering the 2003–2007 winter periods. A new approach to calculate grain size and density is integrated inside the developed data assimilation process. An extensive validation was successfully performed by means of snow data measured at ground stations during the 2008–2010 winter periods. The root mean square error of the data set for snow depth and SWE between January and March of the 2008–2010 periods compared with the respective AMSR‐E footprints indicated that errors for estimated snow depth and predicted SWE values were 16.92 cm and 40.91 mm, respectively, for the 3‐year period. Validation results were less satisfactory for SWE less than 75.0 mm and greater than 150.0 mm. An underestimation for SWE greater than 150 mm could not be resolved owing to the microwave signal saturation that is observed for dense snowpack. Copyright © 2012 John Wiley & Sons, Ltd.     

Modified treatment of intercepted snow improves the simulated forest albedo in the Canadian Land Surface Scheme

The Canadian Land Surface Scheme (CLASS) was modified to correct an underestimation of the winter albedo in evergreen needleleaf forests. Default values for the visible and near‐infrared albedo of a canopy with intercepted snow, α_VIS,cs and α_NIR,cs, respectively, were too small, and the fraction of the canopy covered with snow, f_snow, increased too slowly with interception, producing a damped albedo response. A new model for f_snow is based on z_I*, the effective depth of newly intercepted snow required to increase the canopy albedo to its maximum, which corresponds in the model with f_snow = 1. Snow unloading rates were extracted from visual assessments of photographs and modelled based on relationships with meteorological variables, replacing the time‐based method employed in CLASS. These parameterizations were tested in CLASS version 3.6 at boreal black spruce and jack pine forests in Saskatchewan, Canada, a subalpine Norway spruce and silver fir forest at Alptal, Switzerland, and a boreal maritime forest at Hitsujigaoka, Japan. Model configurations were assessed based on the index of agreement, d, relating simulated and observed daily albedo. The new model employs α_VIS,cs = 0.27, α_NIR,cs = 0.38 and z_I* = 3 cm. The best single‐variable snow unloading algorithm, determined by the average cross‐site d, was based on wind speed. Two model configurations employing ensemble averages of the unloading rate as a function of total incoming radiation and wind speed, and air temperature and wind speed, respectively, produced larger minimum cross‐site d values but a smaller average. The default configuration of CLASS 3.6 produced a cross‐site average d from October to April of 0.58. The best model employing a single parameter (wind speed at the canopy top) for modelling the unloading rate produced an average d of 0.86, while the two‐parameter ensemble‐average unloading models produced a minimum d of 0.81 and an average d of 0.84. © 2015 Her Majesty the Queen in Right of Canada. Hydrological Processes published by John Wiley & Sons, Ltd.     

Snowfall interception in a deciduous Nothofagus forest and implications for spatial snowpack distribution

Native Nothofagus forests in the midlatitude region of the Andes Cordillera are notorious biodiversity hot spots, uniquely situated in the Southern Hemisphere such that they develop in snow‐dominated reaches of this mountain range. Spanning a smaller surface area than similar ecosystems, where forests and snow coexist in the Northern Hemisphere, the interaction between vegetation and snow processes in this ecotone has received lesser attention. We present the first systematic study of snow–vegetation interactions in the Nothofagus forests of the Southern Andes, focusing on how the interplay between interception and climate determines patterns of snow water equivalent (SWE) variability. The Valle Hermoso experimental catchment, located in the Nevados de Chillán vicinity, was fitted with eight snow depth sensors that provided continuous measurements at varying elevations, aspect, and forest cover. Also, manual measurements of snow properties were obtained during snow surveys conducted during end of winter and spring seasons for 3 years, between 2015 and 2017. Each year was characterized by distinct climatological conditions, with 2016 representing one of the driest winters on record in this region. Distance to canopy, leaf area index, and total gap area were measured at each observational site. A regression model was built on the basis of statistical analysis of local parameters to model snow interception in this kind of forest. We find that interception implied a 23.2% reduction in snow accumulation in forested sites compared with clearings. The interception in these deciduous trees represents, on average, 23.6% of total annual snowfall, reaching a maximum measured interception value of 13.8‐mm SWE for all snowfall events analysed in this research.