Effects of soil compaction,rain exposure and their interaction on soil carbon dioxide emission

Soils release more carbon, primarily as carbon dioxide (CO₂), per annum than current global anthropogenic emissions. Soils emit CO₂ through mineralization and decomposition of organic matter and respiration of roots and soil organisms. Given this, the evaluation of the effects of abiotic factors on microbial activity is of major importance when considering the mitigation of greenhouse gases emissions. Previous studies demonstrate that soil CO₂ emission is significantly affected by temperature and soil water content. A limited number of studies have illustrated the importance of bulk density and soil surface characteristics as a result of exposure to rain on CO₂ emission, however, none examine their relative importance. Therefore, this study investigated the effects of soil compaction and exposure of the soil surface to rainfall and their interaction on CO₂ release. We conducted a factorial laboratory experiment with three soil types after sieving (clay, silt and sand soil), three different bulk densities (1·1 g cm^–3, 1·3 g cm^–3, 1·5 g cm^–3) and three different exposures to rainfall (no rain, 30 minutes and 90 minutes of rainfall). The results demonstrated CO₂ release varied significantly with bulk density, exposure to rain and time. The relationship between rain exposure and CO₂ is positive: CO₂ emission was 53% and 42% greater for the 90 minutes and 30 minutes rainfall exposure, respectively, compared to those not exposed to rain. Bulk density exhibited a negative relationship with CO₂ emission: soil compacted to a bulk density of 1·1 g cm^–3 emitted 32% more CO₂ than soil compacted to 1·5 g cm^–3. Furthermore we found that the magnitude of CO₂ effluxes depended on the interaction of these two abiotic factors. Given these results, understanding the influence of soil compaction and raindrop impact on CO₂ emission could lead to modified soil management practices which promote carbon sequestration. Copyright © 2012 John Wiley & Sons, Ltd.     

Characterizing infiltration and internal drainage of South African dryland soils

Surface infiltration and internal drainage properties of five soil types from arid drylands of South Africa were studied under double ring infiltrometer, rainfall simulation plots (1 m²) and instantaneous drainage plots (9 m²). Changes in soil water content during 40 minute rainfall simulation for a rainstorm with average intensity of 1.61 mm min^?1 and 30 day drainage period were measured at various depths by 1.5 m long capacitance soil water measuring (DFM) probe. Different (P < 0.05) mean surface steady infiltration rate ranged from 0.05 to 4.47 mm min^?1 and had a negative power relationship (R ² = 0.65) with horizon clay plus fine silt content. Power regression (R ² ≥ 86%) described rainstorm infiltration and obtained steady rates within an average time of 15 minutes. Mean total infiltrated soil water content was lowest (P < 0.05) from surface horizons with either 47.7% clay plus fine silt content or bulk density of 1.91 g cm^?3 and exchangeable sodium of not less than 44 mg kg^?1. Surface horizons with lower surface bulk density and total sand fraction of more than 72% had infiltrated depth and mean total infiltrated soil water content up to 40 cm deeper and 0.55 mm mm^?1 greater, respectively. Drainage rate at drained upper limit calculated from the Wilcox drainage model (R ² ≤ 0.97%) was 0.2 mm day^?1 or less were from underlying horizons with either clay plus fine silt of 45% or soft calcium carbonate. Higher drainage rate with accumulative drainage amount greater than 60 mm were from soil profile horizons with clay plus fine silt content of less than 20% and above unity steady infiltration rates. Rainstorm infiltration and drainage rates was shown to depend on permeability and coarseness of the respective soil surface and subsurface horizons; a phenomenon critical for harnessing rain and flood water to recharge groundwater. Copyright © 2016 John Wiley & Sons, Ltd.     

Changes of soil surface roughness under water erosion process

The objective of this study was to determine the changing characteristics of soil surface roughness under different rainfall intensities and examine the interaction between soil surface roughness and different water erosion processes. Four artificial management practices (raking cropland, artificial hoeing, artificial digging, and contour tillage) were used according to the local agriculture customs of the Loess Plateau of China to simulate different types of soil surface roughness, using an additional smooth slope for comparison purposes. A total of 20 rainfall simulation experiments were conducted in five 1 m by 2 m boxes under two rainfall intensities (0.68 and 1.50 mm min^?1) on a 15° slope. During splash erosion, soil surface roughness decreased in all treatments except raking cropland and smooth baseline under rainfall intensity of 0.68 mm min^?1, while increasing for all treatments except smooth baseline under rainfall intensity of 1.50 mm min^?1. During sheet erosion, soil surface roughness decreased for all treatments except hoeing cropland under rainfall intensity of 0.68 mm min^?1. However, soil surface roughness increased for the artificial hoeing and raking cropland under rainfall intensity of 1.50 mm min^?1. Soil surface roughness has a control effect on sheet erosion for different treatments under two rainfall intensities. For rill erosion, soil surface roughness increased for raking cropland and artificial hoeing treatments, and soil surface roughness decreased for artificial digging and the contour tillage treatments under two rainfall intensities. Under rainfall intensity of 0.68 mm min^?1, the critical soil surface roughness was 0.706 cm for the resistance control of runoff and sediment yield. Under rainfall intensity of 1.50 mm min^?1, the critical soil surface roughness was 1.633 cm for the resistance control of runoff, while the critical soil surface roughness was 0.706 cm for the resistance control of sediment yield. These findings have important implications for clarifying the erosive nature of soil surface roughness and harnessing sloped farmland. Copyright © 2013 John Wiley & Sons, Ltd.     

A statistically based runoff‐yield model coupling infiltration excess and saturation excess mechanisms

A statistically based runoff‐yield model is proposed in this paper. The model considers spatial heterogeneities of rainfall, soil infiltration capacity and soil water storage capacity that are main factors controlling runoff‐yield process. It assumes that the spatial variation of rainfall intensity at each time step can be characterized by a probability density function, which is estimated by matching the hyetograph through goodness‐of‐fit measure, whereas the spatial heterogeneities of soil infiltration capacity and soil water storage capacity are described by parabola‐type functions. Surface runoff is calculated according to infiltration excess mechanism; the statistical distribution of surface runoff rate can be deduced with the joint distribution of rainfall intensity and soil infiltration rate, thus obtaining a quasi‐analytical solution for surface runoff. Based on saturation excess mechanism, the groundwater flow (flows below the ground are collectively referred to as groundwater flow) is calculated by infiltration and the probability distribution of soil water storage capacity. Consequently, the total runoff is composed of infiltration excess and saturation excess runoff components. As an example, this model is applied to flood event simulation in Dongwan catchment, a semi‐humid region and a tributary of Yellow River in China. It indicates that the proposed runoff‐yield model could achieve acceptable accuracy. Copyright © 2011 John Wiley & Sons, Ltd.     

Runoff generation mechanisms in pastures of the Sand Mountain region of Alabama—a field investigation

Excessive application of poultry litter to pastures in the Sand Mountain region of north Alabama has resulted in phosphorus (P) contamination of surface water bodies and buildup of P in soils of this region. Since surface runoff is recognized as the primary mechanism of P transport, understanding surface runoff generation mechanisms are crucial for alleviating water quality problems in this region. Identification of surface runoff generation mechanisms is also important for delineation of hydrologically active areas (HAAs). Therefore, the specific objective of this study was to identify surface runoff generation mechanisms (infiltration excess versus saturation excess) using distributed surface and subsurface sensors and rain gauge. Results from three rainfall events (2·13–3·43 cm) of differing characteristics, and sensor data at four locations with differing soil hydraulic properties along the hillslope showed that the main surface runoff generation mechanism in this region is infiltration excess. Because of this, rainfall intensity and soil hydraulic conductivity were found to play dominant roles in surface runoff generation in this region. Further, only short periods of a few rainfall events during which the rainfall intensity is high produce surface runoff. This study indicates that perhaps subsurface flows and transport of P in subsurface flows need to be quantified to reduce P contamination of surface water bodies in this region. Current studies at this location are identifying spatial and temporal distribution of HAAs, quantifying rainfall characteristics that generate runoff, and estimating runoff volume that results from connected HAAs. Copyright © 2008 John Wiley & Sons, Ltd.     

Near-surface water fluxes and their controls in a sloping heterogeneously layered volcanic soil beneath a supra-wet tropical montane cloud forest (NW Costa Rica)

Tropical montane cloud forests (TMCF) receive additional (‘occult’) inputs of water from fog and wind-driven rain. Together with the concomitant reduction in evaporative losses, this typically leads to high soil moisture levels (often approaching saturation) that are likely to promote rapid subsurface flow via macropores. Although TMCF make up an estimated 6.6% of all remaining montane tropical forest and occur mostly in steep headwater areas that are protected in the expectation of reduced downstream flooding, TMCF hillslope hydrological functioning has rarely been studied. To better understand the hydrological response of a supra-wet TMCF (net precipitation up to 6535 mm y⁻¹) on heterogeneously layered volcanic ash soils (Andosols), we examined temporal and spatial soil moisture dynamics and their contribution to shallow subsurface runoff and stormflow for a year (1 July 2003–30 June 2004) in a small headwater catchment on the Atlantic (windward) slope near Monteverde, NW Costa Rica. Particular attention was paid to the partitioning of water fluxes into lateral subsurface flow and vertical percolation. The presence of a gravelly layer (C-horizon) at ~25 cm depth of very high hydraulic conductivity (geometric mean: 502 mm h⁻¹) intercalated between two layers of much lower conductivity (7.5 and 15.7 mm h⁻¹ above and below, respectively), controlled both surface infiltration and delayed vertical water movement deeper into the soil profile. Soil water fluxes during rainfall were dominated by rapid lateral flow in the gravelly layer, particularly at high soil moisture levels. In turn, this lateral subsurface flow controlled the magnitude and timing of stormflow from the catchment. Stormflow amount increased rapidly once topsoil moisture content exceeded a threshold value of ~0.58 cm³ cm⁻³. Responses were not affected appreciably by rainfall intensity because soil hydraulic conductivities across the profile largely exceeded prevailing rainfall intensities.     

Dynamics of stormflow generation—A hillslope‐scale field study in east‐central Pennsylvania,USA

A 40 m × 20 m mowed, grass hillslope adjacent to a headwater stream within a 26‐ha watershed in east‐central Pennsylvania, USA, was instrumented to identify and map the extent and dynamics of surface saturation (areas with the water table at the surface) and surface runoff source areas. Rainfall, stream flow and surface runoff from the hillslope were recorded at 5‐min intervals from 11 August to 22 November 1998, and 13 April to 12 November 1999. The dynamics of the water table (0 to 45 cm depth from the soil surface) and the occurrence of surface runoff source areas across the hillslope were recorded using specially designed subsurface saturation and surface runoff sensors, respectively. Detailed data analyses for two rainfall events that occurred in August (57·7 mm in 150 min) and September (83·6 mm in 1265 min) 1999, illustrated the spatial and temporal dynamics of surface saturation and surface runoff source areas. Temporal data analyses showed the necessity to measure the hillslope dynamics at time intervals comparable to that of rainfall measurements. Both infiltration excess surface runoff (runoff caused when rainfall intensity exceeds soil infiltration capacity) and saturation excess surface runoff (runoff caused when soil moisture storage capacity is exceeded) source areas were recorded during these rainfall events. The August rainfall event was primarily an infiltration excess surface runoff event, whereas the September rainfall event produced both infiltration excess and saturation excess surface runoff. Occurrence and disappearance of infiltration excess surface runoff source areas during the rainfall events appeared scattered across the hillslope. Analysis of surface saturation and surface runoff data showed that not all surface saturation areas produced surface runoff that reached the stream. Emergence of subsurface flow to the surface during the post‐rainfall periods appeared to be a major flow process dominating the hillslope after the August rainfall event. Copyright © 2002 John Wiley & Sons, Ltd.     

Impact of lithology and soil properties on abandoned dryland terraces during the early stages of soil erosion by water in south‐east Spain

Soil erosion by water in abandoned dry terraces is one of the most important environmental problems in semiarid areas, enhancing biological degradation and reducing possible resources that can be obtained. However, little is known about the effects of the types of lithology and soil properties on the early stages of soil erosion. Therefore, the main aim of this research was to assess the effect of different lithologies (marls, limestones, and metamorphic—phyllites, schists, and greywackes—materials) and soil properties on the early stages of soil erosion by water in abandoned dry terraces, compared with similar terraces still in agricultural use. Soil analyses (texture, aggregate stability, and bulk density) and 22 rainfall simulations were carried out under dry conditions. During the experiments, local inclination, vegetation and stone cover, total organic matter, and antecedent soil moisture were also quantified. The results showed that the highest soil loss (41.41 g/m² in cultivated plots and 17.05 g/m² in the abandoned plots) and runoff (3.79 L/m² in the abandoned plot) occurred on marl substrata. Marls also showed the shallowest infiltration front (9 cm) and lowest infiltration rate (4.3 cm/min). Limestones and, especially, metamorphic areas, showed a lower degree of soil erosion, higher infiltration rates, and deeper infiltration fronts.     

Modified passive capillary samplers for collecting samples of snowmelt infiltration for stable isotope analysis in remote,seasonally inaccessible watersheds 2: field evaluation

Twelve modified passive capillary samplers (M‐PCAPS) were installed in remote locations within a large, alpine watershed located in the southern Rocky Mountains of Colorado to collect samples of infiltration during the snowmelt and summer rainfall seasons. These samples were collected in order to provide better constraints on the isotopic composition of soil‐water endmembers in the watershed. The seasonally integrated stable isotope composition (δ¹⁸O and δ²H) of soil‐meltwater collected with M‐PCAPS installed at shallow soil depths < 10 cm was similar to the seasonally integrated isotopic composition of bulk snow taken at the soil surface. However, meltwater which infiltrated to depths > 20 cm evolved along an isotopic enrichment line similar to the trendline described by the evolution of fresh snow to surface runoff from snowmelt in the watershed. Coincident changes in geochemistry were also observed at depth suggesting that the isotopic and geochemical composition of deep infiltration may be very different from that obtained by surface and/or shallow‐subsurface measurements. The M‐PCAPS design was also used to estimate downward fluxes of meltwater during the snowmelt season. Shallow and deep infiltration averaged 8·4 and 4·7 cm of event water or 54 and 33% of the measured snow water equivalent (SWE), respectively. Finally, dominant shallow‐subsurface runoff processes occurring during snowmelt could be identified using geochemical data obtained with the M‐PCAPS design. One soil regime was dominated by a combination of slow matrix flow in the shallow soil profile and fast preferential flow at depth through a layer of platy, volcanic rocks. The other soil regime lacked the rock layer and was dominated by slow matrix flow. Based on these results, the M‐PCAPS design appears to be a useful, robust methodology to quantify soil‐water fluxes during the snowmelt season and to sample the stable isotopic and geochemical composition of soil‐meltwater endmembers in remote watersheds. Copyright © 2009 John Wiley & Sons, Ltd.     

Sediment and solute transport on soil slope under simultaneous influence of rainfall impact and scouring flow

Soil erosion and nutrient losses with surface runoff in the loess plateau in China cause severe soil quality degradation and water pollution. It is driven by both rainfall impact and runoff flow that usually take place simultaneously during a rainfall event. However, the interactive effect of these two processes on soil erosion has received limited attention. The objectives of this study were to better understand the mechanism of soil erosion, solute transport in runoff, and hydraulic characteristics of flow under the simultaneous influence of rainfall and shallow clear‐water flow scouring. Laboratory flume experiments with three rainfall intensities (0, 60, and 120 mm h⁻¹) and four scouring inflow rates (10, 20, 30, and 40 l min⁻¹) were conducted to evaluate their interactive effect on runoff. Results indicate that both rainfall intensity and scouring inflow rate play important roles on runoff formation, soil erosion, and solute transport in the surface runoff. A rainfall splash and water scouring interactive effect on the transport of sediment and solute in runoff were observed at the rainfall intensity of 60 mm h⁻¹ and scouring inflow rates of 20 l min⁻¹. Cumulative sediment mass loss (Ms) was found to be a linear function of cumulative runoff volume (Wr) for each treatment. Solute transport was also affected by both rainfall intensity and scouring inflow rate, and the decrease in bromide concentration in the runoff with time fitted to a power function well. Reynolds number (Re) was a key hydraulic parameter to determine erodability on loess slopes. The Darcy–Weisbach friction coefficients (f) decreased with the Reynolds numbers (Re), and the average soil and water loss rate (M_l) increased with the Reynolds numbers (Re) on loess slope for both scenarios with or without rainfall impact. Copyright © 2010 John Wiley & Sons, Ltd.     

Automated rainfall simulator for variable rainfall on urban green areas

Rainfall simulators can enhance our understanding of the hydrologic processes affecting the total runoff to urban drainage systems. This knowledge can be used to improve urban drainage designs. In this study, a rainfall simulator is developed to simulate rainfall on urban green surfaces. The rainfall simulator is controlled by a microcomputer programmed to replicate the temporal variations in rainfall intensity of both historical and synthetic rainfall events with constant rainfall intensity on an area of 1 m². The performance of the rainfall simulator is tested under laboratory conditions with regard to spatial uniformity of the rainfall, the kinetic energy of the raindrops, and the ability to replicate historical and synthetic rainfall events with temporally varying intensity. The rainfall simulator is applied in the field to evaluate its functionality under field conditions and the influence of wind on simulated rainfall. Finally, a field study is carried out on the relationship between runoff, soil volumetric water content, and surface slope. Performance and field tests show that the simulated rainfall has a uniform spatial distribution, whereas the kinetic energy of the raindrops is slightly higher than that of other comparable rainfall simulators. The rainfall simulator performs best in low wind speed conditions. The simulator performs well in replicating historical and synthetic rainfall events by matching both intensity variations and accumulated rainfall depth. The field study shows good correlation between rainfall, runoff, infiltration, soil water content, and surface slope.     

Runoff from soils under different management and simulated rainfall regimes in southern Brazil

Abstract

Surface runoff and drainage were evaluated for southern Brazilian soils subjected to different rainfall intensities and management practices. Soils received up to four applications of simulated rainfall in sequences with one application per day. Seven lysimeters, each of 1 m³ volume, were used to measure drainage volume, with measurement of initial and final water content, times at which surface runoff and lysimeter drainage began, and the volume rates of flow. At the end of the second test, soils were subjected to two levels of disturbance (denoted by low and high soil movement) by opening furrows. These cultivation treatments altered the times at which lysimeter surface runoff and drainage were initiated, the rates of surface runoff, the final infiltration and internal drainage, and the components of the water balance throughout the series of trials. Mean times at which surface runoff was initiated in lysimeters subjected to greater soil disturbance were longer than those with little soil disturbance. Final infiltration rates were greater in lysimeters with little soil disturbance. It was also found that lysimeter surface runoff generation was influenced by the state of development of maize grown in the lysimeter.

Editor D. Koutsoyiannis; Associate editor G. Mahé     

Fire‐induced changes in soil water repellency increased fingered flow and runoff rates following the 2004 Huelva wildfire

Water repellency (WR) from fire‐affected soils can affect infiltration processes and increase runoff rates. We investigated the effects of fire‐induced changes in soil WR and the related soil hydrological response after one of the largest wildfires in Spain in recent years. The vertical distribution of WR in soil profiles was studied under oak and pine forests and the wetting pattern was analysed after rainfall simulations (85 mm h^?1 during 60 min). After burning, the persistence of WR in soils under oaks increased in the upper 0–5 cm of soil in comparison with pre‐fire WR, but no significant changes were observed under pines. After a fire, WR was stronger and the thickness of the water‐repellent layer increased in soils under pines in the upper 0–16 cm of soil. The hydrophobic layer was thinner under oaks, where no strong to extremely water‐repellent samples were observed below 12 (in burnt soils) and 8 cm (in unburnt soils). Uniform wetting was observed through soil depth in burnt and unburnt soils under oaks, as a consequence of the prevailing matrix flux infiltration. Water was mostly stored in the upper few centimetres and soil became rapidly saturated, favouring a continuous rise in the runoff rate during the experiments. Moisture profiles under pines showed a heterogeneous wetting pattern, with highly irregular wetting fronts, as a result of wettable and water‐repellent three‐dimensional soil patches. In this case, runoff rates on burnt plots increased in relation to unburnt plots, but runoff generation reached a steady state after 25–30 min of simulated rainfall at an intensity of 85 mm h^?1. Rainfall water infiltrated over a small part of the ponded area, where the vertical pressure of the water column overcame the WR. Copyright © 2010 John Wiley & Sons, Ltd.     

Compaction and cover effects on runoff and erosion in post-fire salvage logged areas in the Valley Fire,California

Runoff and erosion processes can increase after wildfire and post-fire salvage logging, but little is known about the specific effects of soil compaction and surface cover after post-fire salvage logging activities on these processes. We carried out rainfall simulations after a high-severity wildfire and post-fire salvage logging to assess the effect of compaction (uncompacted or compacted by skid traffic during post-fire salvage logging) and surface cover (bare or covered with logging slash). Runoff after 71 mm of rainfall across two 30-min simulations was similar for the bare plots regardless of the compaction status (mean 33 mm). In comparison, runoff in the slash-covered plots averaged only 22 mm. Rainsplash in the downslope direction averaged 30 g for the bare plots across compaction levels and decreased significantly by 70% on the slash-covered plots. Sediment yield totalled 460 and 818 g m⁻² for the uncompacted and compacted bare plots, respectively, and slash significantly reduced these amounts by an average rate of 71%. Our results showed that soil erosion was still high two years after the high severity burning and the effect of soil compaction nearly doubled soil erosion via nonsignificant increases in runoff and sediment concentration. Antecedent soil moisture (dry or wet) was the dominant factor controlling runoff, while surface cover was the dominant factor for rainsplash and sediment yield. Saturated hydraulic conductivity and interrill erodibility calculated from these rainfall simulations confirmed previous laboratory research and will support hydrologic and erosion modelling efforts related to wildfire and post-fire salvage logging. Covering the soil with slash mitigated runoff and significantly reduced soil erosion, demonstrating the potential of this practise to reduce sediment yield and soil degradation from burned and logged areas.     

Infiltration and runoff generation processes in fire‐affected soils

Post‐wildfire runoff was investigated by combining field measurements and modelling of infiltration into fire‐affected soils to predict time‐to‐start of runoff and peak runoff rate at the plot scale (1 m²). Time series of soil‐water content, rainfall and runoff were measured on a hillslope burned by the 2010 Fourmile Canyon Fire west of Boulder, Colorado during cyclonic and convective rainstorms in the spring and summer of 2011. Some of the field measurements and measured soil physical properties were used to calibrate a one‐dimensional post‐wildfire numerical model, which was then used as a ‘virtual instrument’ to provide estimates of the saturated hydraulic conductivity and high‐resolution (1 mm) estimates of the soil‐water profile and water fluxes within the unsaturated zone. Field and model estimates of the wetting‐front depth indicated that post‐wildfire infiltration was on average confined to shallow depths less than 30 mm. Model estimates of the effective saturated hydraulic conductivity, K_s, near the soil surface ranged from 0.1 to 5.2 mm h^?1. Because of the relatively small values of K_s, the time‐to‐start of runoff (measured from the start of rainfall), t_p, was found to depend only on the initial soil‐water saturation deficit (predicted by the model) and a measured characteristic of the rainfall profile (referred to as the average rainfall acceleration, equal to the initial rate of change in rainfall intensity). An analytical model was developed from the combined results and explained 92–97% of the variance of t_p, and the numerical infiltration model explained 74–91% of the variance of the peak runoff rates. These results are from one burned site, but they strongly suggest that t_p in fire‐affected soils (which often have low values of K_s) is probably controlled more by the storm profile and the initial soil‐water saturation deficit than by soil hydraulic properties. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Measurement of surface water runoff from plots of two different sizes

Intensities and amounts of water infiltration and runoff on sloping land are governed by the rainfall pattern and soil hydraulic conductivity, as well as by the microtopography and soil surface conditions. These components are closely interrelated and occur simultaneously, and their particular contribution may change during a rainfall event, or their effects may vary at different field scales. The scale effect on the process of infiltration/runoff was studied under natural field and rainfall conditions for two plot sizes: small plots of 0·25 m² and large plots of 50 m². The measurements were carried out in the central region of Chile in a piedmont most recently used as natural pastureland. Three blocks, each having one large plot and five small plots, were established. Cumulative rainfall and runoff quantities were sampled every 5 min. Significant variations in runoff responses to rainfall rates were found for the two plot sizes. On average, large plots yielded only 40% of runoff quantities produced on small plots per unit area. This difference between plot sizes was observed even during periods of continuous runoff. Copyright © 2002 John Wiley & Sons, Ltd.     

Temporal and spatial variations of runoff and rainwash erosion on an agricultural field

This paper investigates the spatial and temporal variations of runoff, erosion and rate of sediment transport on an agricultural field submitted to natural rainfalls. The site, located in the Eastern Townships (Québec, Canada), is a corn field (10000 m²) where sheetwash erosion is active. Water (Q) and sediment (Qs) discharges were measured from June to October at eight locations on the field and for ten rainfall events. Analysis of the data was carried out on an aggregate data set and on the distributed measurements in time and space. The results showed that changes in vegetation, soil compaction and crusting are critical in determining temporal variations of runoff and erosion. Until August, the increase in soil compaction reduced infiltration capacity and depression storage and generated greater runoff for a given rainfall intensity (I). Sediment transport decreased as particle detachment is less likely to occur when vegetation breaks the drop impact and the soil surface is sealed. Later in the season, we observed an increase in sediment concentration associated with the presence of burrowing insects and harvest activity, providing loose sediments to the broken down surface. Intercepts and slopes of the relationship between Q and Qs also vary during the period of measurement. High sediment availability over the soil surface in June and October gives high intercept values. The slope of the relationship is more stable but difficult to estimate for extreme events (high values of I or low Q values) where the number of sampled points are small. During a rainfall, the response of the field is dominated by the topography and drainage area. The largest amount of runoff and erosion occurred on straight and steep slopes with small drainage areas, and on converging gentle slopes with large drainage areas. Although aggregate runoff and erosion values are decreasing with drainage area, parameters of the Qs-Q relationship for different locations on the field are not statistically different. These results bear important consequences for models of sheetwash erosion on agricultural fields.     

Tracer and hydrometric study of preferential flow in large undisturbed soil cores from the Georgia Piedmont,USA

We studied the temporal patterns of tracer throughput in the outflow of large (30 cm diameter by 38 cm long) undisturbed cores from the Panola Mountain Research Watershed, Georgia. Tracer breakthrough was affected by soil structure and rainfall intensity. Two rainfall intensities (20 and 40 mm hr⁻¹) for separate Cl⁻ and Br⁻ amended solutions were applied to two cores (one extracted from a hillslope soil and one extracted from a residual clay soil on the ridge). For both low and high rainfall intensity experiments, preferential flow occurred in the clay core, but not in the hillslope core. The preferential flow is attributed to well‐developed interpedal macrochannels that are commonly found in structured clay soils, characteristic of the ridge site. However, each rainfall intensity exceeded the matrix infiltration capacity at the top of the hillslope core, but did not exceed the matrix infiltration capacity at the middle and bottom of the hillslope core and at all levels in the clay core. Localized zones of saturation created when rainfall intensity exceeds the matrix infiltration capacity may cause water and tracer to overflow from the matrix into macrochannels, where preferential flow occurs to depth in otherwise unsaturated soil. Copyright © 1999 John Wiley & Sons, Ltd.     

An approach to analysing plot scale infiltration and runoff responses to rainfall of fluctuating intensity

Simulated rainfall of fluctuating intensity was applied to runoff plots on bare dryland soils in order to explore a new method for analysing the non‐steady‐state responses of infiltration and overland flow. The rainfall events all averaged 10 mm/h but included intensity bursts of up to 70 mm/h and lasting 5–15 min, as well as periods of low intensity and intermittency of up to 25 min. Results were compared with traditional steady‐state estimates of infiltrability made under simulated rainfall sustained at a fixed intensity of 10 mm/h. Mean event infiltration rate averaged 13.6% higher under fluctuating intensities, while runoff ratios averaged only 63% of those seen under constant intensity. In order to understand the changing soil infiltrability, up to three affine Horton infiltration equations were fitted to segments of each experiment. All equations had the same final infiltrability f_c, but adjusted values for coefficients f₀ (initial infiltrability) and K_f (exponential decay constant) were fitted for periods of rainfall that followed significant hiatuses in rainfall, during which subsurface redistribution allowed near‐surface soil suction to recover. According to the fitted Horton equations, soil infiltrability recovered by up 10–24 mm/h during intra‐event rainfall hiatuses of 15 to 20‐min duration, contributing to higher overall event infiltration rates and to reduced runoff ratios. The recovery of infiltrability also reduced the size of runoff peaks following periods of low intensity rainfall, compared with the predictions based on single Horton infiltration equations, and in some cases, no runoff at all was recorded from late intensity peaks. The principal finding of this study is that, using a set of affine equations, the intra‐event time variation of soil infiltrability can be tracked through multiple intensity bursts and hiatuses, despite the lack of steady‐state conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

Characterizing the climatic water balance dynamics and different runoff components in a poorly gauged tropical forested catchment,Nicaragua

ABSTRACT

The water balance dynamics and runoff components of a tropical forested catchment (46?km²) on the southwestern Pacific coast of Nicaragua were studied combining hydrometry, geological characterization and hydrochemical and isotopic tracers (three-component hydrograph separation). The climatic water balance was estimated for 2010/11, 2011/12 and 2012/13 with net values of 811?mm year^-1, 782?mm year^-1 and –447?mm year^-1, respectively. Runoff components were studied at different spatial and temporal scales, demonstrating that different sources and temporal contributions are controlled by dominant landscape elements and antecedent rainfall. In forested sub-catchments, permeable soils, stratigraphy and steep slopes favour subsurface stormflow generation contributing 50% and 53% to total discharge. At catchment scale, landscape elements such as smooth slopes, wide valleys, deeper soils and water table allow groundwater recharge during rainfall events. Groundwater dominates the hydrograph (50% of total discharge) under dry prior conditions. However, low soil infiltration capacity generates a larger surface runoff component (42%) under wet prior conditions which dominates total discharge. Our results show that forested areas are important to reduce surface runoff and thus soil degradation, which is relevant for the design of water management plans.

Editor D. Koutsoyiannis Associate editor D. Gerten