一致概率谱与规范谱ht

在重大工程的地震安全性评价工作中，根据概率法地震危险性分析得到的一致概率反应谱，与建筑抗震设计规范给出的设计反应谱常常不一致，有时甚至会有较大的差异．一致概率反应谱低于相应的规范反应谱时，可能会产生重大工程抗震设防标准低于一般工业与民用建筑抗震设防标准的问题．本文利用理想简化的潜在震源，对一致概率谱与规范设计反应谱之间的关系进行了讨论．分析结果表明，对于较为普遍的主要受直下型地震和近震潜源影响的地区，在长周期部分，一致概率谱总体小于规范谱．规范谱长周期部分值得深入研究，且应尽可能与区划工作的概率法相结合．由于地震安全性评价工作存在较大的不确定性，故重大工程的抗震设防标准，据地震安全性评价结果将长周期部分降至规范谱（一般工民建）之下宜慎重．      

Characteristics of response spectra for long-periods of main-shock recordings of the Chi-Chi earthquake

Current practice uses predictive models to extrapolate long-period response spectra based on far-field recordings in moderate and weak earthquakes. However, the spectra are not long enough and the data are often not reliable, which means that the seismic design code cannot accurately define seismic design requirements for long-period structures. The near-field recordings in the main-shock of the Chi-Chi earthquake have a large signal-to-noise ratio (SNR), which makes them suitable for studying the long-period acceleration response spectrum up to 20 sec. The acceleration response spectra from 246 stations within 120 km of the causative fault are statistically analyzed in this paper. The influence of distance and site conditions on long-period response spectrum is discussed, and the shapes of the amplification spectra are compared with the standard spectra specified in the seismic design code of China. Finally, suggestions for future revisions to the code are proposed.     

近断层竖向与水平向加速度反应谱比值特征

显著的竖向地震动是近断层地震动区别于远场地震动的重要特征之一,为更合理地确定竖向地震动作用,研究了近断层区域竖向地震动的反应谱特征及其与水平向反应谱比值的影响因素.首先,选取1952—1999年世界范围内震级在M5.4—7.6之间的18次地震的地震动记录,研究竖向地震加速度反应谱及其与水平向加速度反应谱比值特征;然后统计分析了断层距、场地条件、震级以及断层机制对竖向与水平向加速度反应谱比的影响.结果表明,一般情况下竖向加速度具有更丰富的短周期分量,并且竖向加速度反应谱衰减较慢;断层距在20km以内的近断层区域、软弱土层场地、中等震级地震和逆断层大震级中长周期范围等条件下,具有较大的竖向与水平向加速度反应谱比值;在近断层区域的结构抗震设计中应充分考虑竖向地震动的影响.     

长周期地震波的研究进展

长周期地震波的研究对自振周期较长的大型结构的抗震设计具有重要意义。目前国内外主要的长周期地震波分析方法大致可分为两类:经验统计方法和地震学中的震源模型方法,通过对这两类方法的研究现状和适用范围的分析,提出了在地震动长周期的研究和应用中有待解决的关键问题。为了将长周期分析方法应用于大跨结构的抗震设计,还介绍了我国现有的抗震设计规范谱中对长周期部分的修正方法。     

Consecutive combined response spectrum

Appropriate estimates of earthquake response spectrum are essential for design of new structures, or seismic safety evaluation of existing structures. This paper presents an alternative procedure to construct design spectrum from a combined normalized response spectrum(NRSC) which is obtained from pseudo-velocity spectrum with the ordinate scaled by different peak ground amplitudes(PGA, PGV, PGD) in different period regions. And a consecutive function f(T) used to normalize the ordinates is defined. Based on a comprehensive study of 220 strong ground motions recorded during recent eleven large worldwide earthquakes, the features of the NRSC are discussed and compared with the traditional normalized acceleration, velocity and displacement response spectra(NRSA, NRSV, NRSD). And the relationships between ground amplitudes are evaluated by using a weighted mean method instead of the arithmetic mean. Then the NRSC is used to define the design spectrum with given peak ground amplitudes. At last, the smooth spectrum is compared with those derived by the former approaches, and the accuracy of the proposed spectrum is tested through an analysis of the dispersion of ground motion response spectra.     

中外抗震规范设计反应谱的规定及研究建议

抗震设计规范中的场地设计反应谱是一般工程抗震设计的依据,各国的抗震设计规范对场地设计反应谱的规定不尽相同。主要表现在反应谱的形状和谱参数的差异。本文收集了若干国家的抗震设计规范;在总结各国抗震设计规范中关于场地设计反应谱规定的基础上,对中国、美国、日本、欧洲、土耳其和智利等有代表性的国家和地区的抗震设计规范进行分析和对比研究;总结了我国抗震设计规范场地设计反应谱的演化历史和发展过程;提出了进一步开展这一领域研究工作的若干建议,本文的工作对从事场地设计反应谱研究的科技人员有重要的参考价值。     

Comparison of DSHA-based response spectrum with design response spectrum of building code of Pakistan (BCP-SP-2007) for a site in Muzaffargarh area,Pakistan

The building code of any country is considered to be a basic technical guidance document for the seismic design of structures. However, building codes are typically developed for the whole country, without considering site specific models that incorporate detailed site-specific data. Therefore, the adequacy of the design spectrum for building codes may sometimes be questionable. To study the sufficiency of the building codes of Pakistan (BCP-SP-2007), a deterministic seismic hazard analysis (DSHA) based spectrum was developed for a site in the Muzaffargarh area, Pakistan, using an updated earthquake catalogue, seismic source model, and a next generation attenuation model (NGA-WEST-2). Further, an International Building Code (IBC-2000) spectrum was developed for the study area to compare the results. The DSHA-based response spectrum resulted in a peak ground acceleration (PGA) value of 0.21 g for the Chaudwan fault. The evaluation of BCP-SP-2007 and IBC-2000 spectra provided a critical assessment for analyzing the associated margins. A comparison with the DSHA-based response spectrum showed that the BCP-SP-2007 design spectrum mostly overlapped with the DSHA spectrum unlike IBC-2000. However, special attention is needed for designing buildings in the study area when considering earthquake periods longer than 1 s, and the BCP-SP-2007 spectrum can be enhanced when considering a period range of 0.12–0.64 s. Finally, BCP-SP-2007 is based on a probabilistic approach and its comparison with deterministic results showed the significance of both methods in terms of design.     

Characteristics of near-fault ground motion containing velocity pulses

There are many reports about the research on near-fault velocity pulses, which focus on the generation of velocity pulse and simplify the velocity pulse so as to be used in the seismic design of structure, However few researches have put emphasis on the characteristics of near-fault ground motions containing velocity pulses, especially the characteristics relevant with the design response spectrum prescribed by the code. Through collection of a large number of near-fault records containing velocity pulses, the response spectra and the characteristic periods of records containing no pulses are compared with those of records containing pulses. Response spectra of near-fault records are compared with standard spectra given by code; furthermore, the response spectra and the characteristic periods of each earthquake are compared with that given by code. The result shows that at long periods （longer than 1.5 s）, the response spectrum of pulse-containing records is bigger than the response spectrum of no-pulse-containing records; when the characteristic period of near-fault records is calculated, the method that does not fix frequency is more reasonable because the T1 and T2 have a lagging tendency; regardless of the site Ⅰ and site Ⅱ, the characteristic period of pulse-containing records is over twice bigger than the characteristic period given by the code,     

A comparison of IBC with 1997 UBC for modal response spectrum analysis in standard-occupancy buildings

This paper presents a comparison of the seismic forces generated from a Modal Response Spectrum Analysis (MRSA) by applying the provisions of two building codes, the 1997 Uniform Building Code (UBC) and the 2000-2009 International Building Code (IBC), to the most common ordinary residential buildings of standard occupancy. Considering IBC as the state of the art benchmark code, the primary concern is the safety of buildings designed using the UBC as compared to those designed using the IBC. A sample of four buildings with different layouts and heights was used for this comparison. Each of these buildings was assumed to be located at four different geographical sample locations arbitrarily selected to represent various earthquake zones on a seismic map of the USA, and was subjected to code-compliant response spectrum analyses for all sample locations and for five different soil types at each location. Response spectrum analysis was performed using the ETABS software package. For all the cases investigated, the UBC was found to be significantly more conservative than the IBC. The UBC design response spectra have higher spectral accelerations, and as a result, the response spectrum analysis provided a much higher base shear and moment in the structural members as compared to the IBC. The conclusion is that ordinary office and residential buildings designed using UBC 1997 are considered to be overdesigned, and therefore they are quite safe even according to the IBC provisions.     

Attenuation relations for horizontal peak ground acceleration and response spectrum in northeastern Tibetan Plateau region

Introduction Developing local attenuation relations of ground motion is one of the key steps in seismic hazard assessment. Because of inadequate strong ground motion records in China, the attenuation relations used in China are usually developed by using the transforming method (Hu, Zhang, 1983; HU, ZHANG, 1984). To use this method, we need to have both the attenuation relation of seismic intensity for the studied region and the attenuation relations of seismic intensity and ground mo-tion…     

基于模拟退火算法的设计反应谱标定方法

反应谱的标定是抗震设计的基础工作之一,模拟退火算法是基于模拟固体退火过程而提出的多参数优化组合方法。本文提出将模拟退火算法应用于设计反应谱的标定,并概述了模拟退火算法的基本原理及特点,介绍了运用MATLAB基于模拟退火算法对反应谱进行标定的过程。检验了将模拟退火算法应用于场地相关谱标定的可行性和合理性,给出了将其应用于工程场地地震安全性评价中设计反应谱标定实例。通过检验和实例分析可以看出,基于模拟退火算法的反应谱标定方法所给出的设计反应谱谱形真实地反映了原地震反应谱的特征,较客观的反映了场地相关反应谱的峰值和周期特征。     

Hazard-consistent response spectra in the Region of Murcia (Southeast Spain): comparison to earthquake-resistant provisions

Hazard-consistent ground-motion characterisations of three representative sites located in the Region of Murcia (southeast Spain) are presented. This is the area where the last three damaging events in Spain occurred and there is a significant amount of data for comparing them with seismic hazard estimates and earthquake-resistant provisions. Results of a probabilistic seismic hazard analysis are used to derive uniform hazard spectra (UHS) for the 475-year return period, on rock and soil conditions. Hazard deaggregation shows that the largest hazard contributions are due to small, local events for short-period target motions and to moderate, more distant events for long-period target motions. For each target motion and site considered, the associated specific response spectra (SRS) are obtained. It is shown that the combination of two SRS, for short- and long-period ground motions respectively, provides a good approximation to the UHS at each site. The UHS are compared to design response spectra contained in current Spanish and European seismic codes for the 475-year return period. For the three sites analysed, only the Eurocode 8 (EC8) type 2 spectrum captures the basic shape of the UHS (and not the EC8 type 1, as could be expected a priori). An alternative response spectrum, anchored at short- and long-period accelerations, is tested, providing a close match to the UHS spectra at the three sites. Results underline the important contribution of the frequent, low-to-moderate earthquakes that characterize the seismicity of this area to seismic hazard (at the 475-year return period).     

A response spectrum approach for seismic performance evaluation of actively controlled structures

To evaluate and measure the effectiveness of active control schemes in reducing the response of structures subjected to earthquake excitations, it is common to use recorded or artificially generated earthquakes as input motions. This paper introduces the response spectrum analysis to evaluate linear control systems for seismic inputs defined by code‐prescribed or site‐specific ground response spectra. Using such a method one can evaluate a control system in a single analysis for the ensemble of time histories that are represented by the input response spectra. The response spectrum analysis can also facilitate the implementation of comprehensive parametric studies. A generalized response spectrum method is used to analyse systems with non‐symmetrical matrices that are caused by the general nature of the control actions imposed on the structure. The application of the method is demonstrated on several numerical examples of a building structure where the control force is applied through an active tuned‐mass damper. Copyright © 2000 John Wiley & Sons, Ltd.     

抗震设计中多遇地震的问题和讨论

指出作为截面抗震验算标准的“小震”混淆了两种明显不同的概念:其一是对应于50年超越概率63％的地震动参数(以下简称“多遇小震”);其二是50年超越概率10％的地震动参数经过折算得到的参数(以下简称“折算小震”).上述混淆导致抗震设计中实际上执行着不同的标准.文中讨论了中、小地震动参数之间关系的复杂性,包括从地震危险性分...     

A new formulation for a code-based vertical design spectrum

Consideration of vertical seismic design loads is important for long-span structural systems, short-period structures, and for some nonstructural components in the buildings. To this end, seismic design codes utilize alternative approaches to define vertical design spectrum at different levels of complexity: either as a fraction of horizontal design spectrum or using a separate functional form having features different than the horizontal spectrum. In all cases, a consistency between the horizontal and vertical design spectral ordinates is sought. In this paper, we consider a set of modern seismic design codes, horizontal and vertical ground-motion datasets, as well as ground-motion predictive models (GMPMs) to assess the accuracy of code-based vertical design spectrum expressions. We compute horizontal and vertical spectra for different earthquake scenarios (magnitude-distance-soil condition combinations) from the selected horizontal and vertical GMPMs for comparisons with their code-based (idealized) counterparts. Besides that, we study the vertical spectrum behavior from observed ground-motion data. Our observations suggest that the vertical design spectrum formulations by current codes do not fully explain the actual vertical spectral acceleration trends. We discuss the possible reasons behind the misrepresentation of vertical spectrum by the current code approach and introduce our own expressions to compute horizontal spectrum consistent vertical design spectrum from a comprehensive simulated dataset of correlated vertical and horizontal spectral ordinates.     

北京盆地结构对长周期地震动反应谱的影响

建立了北京盆地含起伏地形的地下介质三维速度结构模型, 以有限差分方法对盆地内的3次地震动进行了数值模拟． 计算了地表加速度反应谱, 论证了反应谱的有效周期范围, 从而获得了盆地结构对长周期段反应谱的平均放大系数, 并对不同周期时反应谱的平均放大系数进行了分区, 为今后城市的合理规划和长周期建筑物的建设提供了抗震设防参考． 最后对反应谱平均放大系数与等效沉积物厚度之间的关系进行了回归, 得出了反应谱放大系数随沉积物厚度增大而增强, 以及随周期增大而减弱等结论．      

基于新《电力设施抗震设计规范》的地震动随机模型参数研究

根据新《电力设施抗震设计规范》(GB50260-2013)对随机地震动功率谱参数的取值进行分析。介绍新《电力设施抗震设计规范》中设计反应谱,推导设计谱到功率谱的转换过程。选取常用的Clough-Penzien修正过滤白噪声模型作为拟合函数,通过功率谱参数拟合,得到不同场地类别、不同抗震设防烈度下的地震动模型参数。该研究成果可为电力工程抗震设计分析提供参考。     

对上海市抗震设计反应谱及时程曲线的认识一答“关于上海市《建筑抗震设计规程》中长周期设计反应谱的讨论”

本文对上海市《建筑抗震设计规程(DGJ108-9-92)》中反应谱的研究工作作了介绍,就该反应谱的动力放大系数、特征周期、大于6秒周期反应谱的取值以及时程的合理性问题谈了个人看法,提出了一些改进意见。     

远场长周期地震下基于规范设计隔震结构的抗震性能研究

隔震结构具有较长自振周期,且容易受地震动长周期特性的影响,因此其在长周期地震动作用下的抗震性能值得研究。以某基于规范设计的基础隔震结构为例,通过对该结构在规范规定地震作用和远场长周期地震作用下的地震响应进行分析和对比,研究长周期地震动对结构地震响应的影响;通过对钢筋和混凝土的损伤状态进行定义和标识,探讨长周期地震作用下基础隔震结构的损伤分布规律。研究结果表明,长周期地震动作用下隔震结构发生破坏的概率远大于具有相同峰值地面加速度的普通地震动,其中长周期地震动反应谱的谱峰值"后移"被认为是造成这种情况的主要原因,且长周期地震动作用下隔震结构的损伤分布并不均匀,其主要集中在结构的底层。     

近场地震动特性及其弹性与塑性谱的研究

结构在近场地震动作用下的反应和远场地震动作用下的明显不同,这主要是由近场地震动高能量的速度脉冲等特征决定的。通过对110条近场地震动记录的分析．得到了相应的弹性反应谱,并通过对近场地震动和远场地震动作用下结构塑性分析进行对比．得到了以下结论：近场地震动作用下结构的弹性反应谱与规范谱明显不同,尤其在长周期阶段,表明规范谱值偏小;近场地震动作用对结构提出了更高的强度和变形需求。