波浪作用下可液化海床最大液化深度

较大的风浪会使海床发生液化,波浪引起的海床液化问题是海岸及近海工程必须考虑的关键问题之一.基于Biot固结理论,同时考虑了振荡孔隙水压力和残余孔隙水压力的液化准则,作者推出了波浪作用下可液化海床最大液化深度的解析表达式.同时分别采用解析表达式和FLAC数值模拟求解了相应的例子,两者得出的液化深度均和例子的基本相等.且从FLAC的结果可看出,加载波浪力时孔隙水压力开始累积,土体有效应力逐渐下降,当有效应力降到零时,海床土层液化,海床土颗粒重组后下沉压实,之后残余孔隙水压力开始消散,土层有效应力逐渐恢复.最后还就不同波高、波长和水深进行了解析解和数值解的对比,两者得出的结果比较吻合,并能较好地反映海床液化深度变化规律.     

波浪荷载作用下海底隧道-孔隙海床的动力分析

孔隙海床在波浪荷载作用下其有效应力减小、孔隙水压力增加,这将影响孔隙海床中隧道的稳定性,因此,研究在波浪荷载作用下孔隙海床与隧道的动力响应具有重要的工程意义。本文基于Biot的动力固结理论和弹性动力学理论建立波浪荷载作用下孔隙海床与海底隧道的动力分析模型,并同时考虑海底隧道与海床之间的接触效应、边界效应等对海底隧道内力的影响。最后通过变换海床的变形模量、渗透系数和海底隧道的半径、埋深等,观察其对海床土孔隙水压力和海底隧道内力的影响,为海底隧道的设计提供依据。     

水域隧道地震响应分析

本文基于Biot动力固结理论和弹性动力学理论,考虑海床（土壤）的两相性、黏弹性人工边界及流（水）-固耦合作用,建立了隧道-土-流体相互作用的力学模型,讨论了P波作用下有无水的情况以及水深、水域隧道埋深、海床土性质和地震波入射角等因素对隧道及其周围海床应力的影响。结果表明:隧道周围海床土的孔隙水压力和隧道内应力随着水深的增加而增加;地震波特性和海床土特性对隧道的内应力和海床土的孔隙水压力均有较大的影响;海床土的渗透性和隧道埋深对隧道的内应力影响较小,而对隧道周围海床土的孔隙水压力影响较大;地震动的入射角对隧道的内应力和隧道附近土层的孔隙水压力均有较大影响。      

地基液化导致沉箱码头破坏及地基加固方法的非线性数值分析

地震作用引发的地基液化,往往导致沉箱基础的破坏。本文基于Biot两相饱和多孔介质动力耦合理论,采用FE-FD耦合数值分析方法,对液化海床沉箱基础的地震反应进行非线性有效应力分析。在数值分析过程中,建立了以土骨架位移和超静孔隙水压力表达的us-pw动力固结方程和循环弹塑性本构模型,该方法能够很好地模拟地震作用下沉箱码头的动力特性及液化破坏的影响。通过数值模拟计算,分析了采用碎石桩进行置换砂区域的防液化加固方法,并就碎石桩处理区域的选择提出了建议。     

某核电站导流堤地基液化及地震永久变形分析

在地震反应分析中常采用总应力分析法,但总应力法没有考虑孔隙水压力的变化规律和液化随时间的发展过程。基于二维有效应力动力分析方法,结合Biot动力固结理论,采用自行开发的有效应力动力分析程序对某核电站导流堤地基进行液化分析,给出在地震作用下砂土层的液化范围,并计算出永久变形。所得结论可以给类似工程提供理论指导。     

沙土在孔隙水注入实验中渗透剪切破坏

前人曾指出液化后伴随着超孔隙水压重新分配的渗透会引起流体破坏的可能性。为了研究这一现象,利用实验室三轴试验将孔隙水注入土壤检测了土壤的渗透剪切破坏。该实验是在各项异性的固结作用后保持差应力,使用孔隙水控制装置在体积不变的应变控制条件下将孔隙水注入。实验中所用的材料是在1995年神户地震时被液化的常规洁净细砂和风化的花岗岩土壤。本文以实验结果为基础,讨论了由孔隙水注入引起的渗透剪切破坏判据和导致后液化行为的剪切应变发展特征。     

土坝地震孔隙水压力产生、扩散和消散的三维动力分析

本文将地震孔隙水压力与土坝(尾矿坝)的变形和固结紧结合起来,引用著名的皮奥(Biot)方程,用空间等参数有限单元法求解位移和残余孔隙水压力;提出了一种用于土坝动力分析的非线性三维有效应力分析力法。该法不仅可计算地震动应力、动应变、加速度,而且可以计算地震期间和地震后孔隙水压力的增长、扩散、消散、液化的发生和发展过程、土的残余变形及其随着时间的变化。文中用加权剩余值法详细推导了有限单元法的计算公式。文末举有算例。     

波浪作用下软土地基半圆型防波堤稳定性模型实验研究

在长456 m、宽5 m、深8~12 m的实验水槽建立了模型与原型比尺为1∶5的模拟波浪—半圆型防波堤结构—软土地基实际工作状态的物理模型实验系统,开展了设计高低水位、不同波高和波浪作用循环次数作用下半圆型防波堤结构稳定性实验研究。通过对实验测试数据分析,得出半圆型防波堤软土地基孔隙水压力的变化规律,孔隙水压力发展趋势分为四种类型。从结构安全不利角度选取增长型曲线进行数据拟合,得到半圆型防波堤下软土地基对数型的最大孔隙水压力发展模型。     

地震和波浪联合作用下自由场海水动水压力分析

假定基岩为弹性半空间、海床土为流固饱和介质,研究了SV波斜入射条件下地震和波浪联合作用下自由场海水的动水压力反应问题。以输入El Centro地震动为例,结果表明:对于地震和波浪联合作用下的动水压力,无论是浅水或是深水情况,当波浪频率很小时,在一个波浪波长范围内的动水压力随水平位置的变化很小,随着波浪频率的增大,水平位置影响加强;波浪作用对联合动水压力的主导影响随波浪频率的增高在深水区变弱,此时,联合动水压力取决于相应频率地震动能量的大小。     

软件ABAQUS在饱和土体动力响应分析中的应用

研究表明:地震作用下土体的动力特性及变形特性与超静孔隙水压力的发展变化密切相关,因此,在土体动力分析过程中考虑孔隙水压的影响是非常必要的。本文通过对基本方程的推导,借助于大型有限元软件ABAQUS,进行了饱和土体在动力作用下孔隙水压变化的数值模拟。计算结果表明,ABAQUS完全适用于此类问题的数值模拟,并且稳定性和收敛性较好。     

Numerical analysis of liquefaction of porous seabed around pipeline fixed in space under seismic loading

Liquefaction of seabed under seismic loading is one of the main points that govern the overall stability of submarine pipeline. However, most previous investigations concerned only with free seabed and searched for seismic accumulative excess pore pressure by solving Terzaghi's consolidation equation containing pore pressure source term. It is not able to introduce two-dimensional structures such as submarine pipelines in one-dimensional problem, and it is also not able to obtain the distribution of seismic accumulative excess pore pressure in seabed around submarine pipelines by such a way. In this study, a FEM numerical analysis method for determining the liquefaction of sandy seabed around a buried pipeline under seismic loading is presented. The empirical mode of dynamic increase of pore pressure under undrained shearing induced by seismic loading is incorporated with two-dimensional dynamic consolidation equation and a numerical procedure based on FEM is developed to assess the accumulative excess pore pressure. By numerical computations, the accumulative process of pore pressure and liquefaction potential of seabed soil during seismic loading is evaluated. From a series of numerical computations based on the presented model with various parameters, the effects of soil characteristic parameters and pipeline geometry on seismic accumulative excess pore pressure around submarine pipeline and along the depth of seabed are explored in detail.     

Effects of cross-anisotropic soil behaviour on the wave-induced residual liquefaction in the vicinity of pipeline buried in elasto-plastic seabed foundations

In this paper, a two-dimensional integrated numerical model is developed to examine the influences of cross-anisotropic soil behaviour on the wave-induced residual liquefaction in the vicinity of a pipeline buried in a porous seabed. In the wave model, the RANS (Reynolds Averaged Navier–Stokes) equation is used to govern the wave motion. In the seabed model, the residual soil response in the vicinity of an embedded pipeline is considered with the 2-D elasto-plastic solution, where the phase-resolved shear stress is used as a source for the build-up of residual pore pressure. Classical Biot׳s consolidation equation is used for linking the solid-pore fluid interaction. The validation of the proposed integrated numerical model is conducted by the comparisons with the previous experimental data. Numerical examples show that the pore pressures can accumulate to a large value, thus resulting in a larger area of liquefaction potential in the given anisotropic soil compared to that with isotropic solution. The influences of anisotropic parameters on the wave-induced residual soil response in the vicinity of pipeline are significant. A high rate of pore pressure accumulation and dissipation is observed and the liquefaction potential develops faster as the anisotropic parameters increase. Finally, a simplified approximation based on a detailed parametric investigations is proposed for the evaluation of maximum liquefaction depth (z_L) in engineering application.     

Three-dimensional poro-elasto-plastic model for wave-induced seabed response around submarine pipeline

The evaluation of the wave-induced excess pore pressure around a buried pipeline is particularly important for pipeline engineers involved in the design of offshore pipelines. Existing models for the wave-induced seabed response around submarine pipeline have been limited to poro-elastic soil behavior and de-coupled oscillatory and residual mechanisms for the rise in excess pore water pressure. To overcome the shortcoming of the existing models, in this study a three-dimensional poro-elasto-plastic soil model with submarine pipeline is established, in which both oscillatory and residual mechanisms can be simulated simultaneously. With the proposed model, a parametric study is conducted to investigate the relative differences of the predictions of the wave-induced pore pressure with poro-elasto-plastic model. Based on numerical examples, it can be concluded that the poro-elasto-plastic behaviors of soil have more significant influence on wave-induced pore pressure of seabed around submarine pipeline. As the seabed depth increases, the normalized pore pressures decrease rapidly at the upper part of seabed, and then change slightly at the lower part of the seabed. Soil permeability and wave period have obvious influence on the wave-induced normalized pore pressure.     

Finite element modelling for water waves-soil interaction

The soil permeability and shear modulus of many marine sediments vary with depth because of consolidation under overburden pressure. However, conventional theories for wave-induced soil response have assumed a homogeneous porous seabed, with constant soil permeability and shear modulus. This paper presents a finite element model for the wave-induced soil response in a porous seabed, with variable permeability and shear modulus as a function of burial depth. The soil matrix considered here is unsaturated and hydraulically anisotropic, and subjected to a three-dimensional short-crested wave system. The present finite element formulation is established by using a combination of semi-analytical techniques and the Galerkin method. The nodal effective stresses directly derived from the governing equations can be calculated accurately in the present model. Verification is available through the reduction to the simple case of homogeneous seabed. Three typical marine materials, course, fine sand and gravel, are considered in this study. The numerical results indicate that the soil permeability affects the wave-induced seabed response significantly especially for gravelled seabed, as does the soil shear modulus for sandy seabed.     

含砾量对饱和砂砾土液化特性的影响

利用GDS循环三轴仪进行一系列饱和砂砾土不排水动三轴液化试验,研究其在循环荷载作用下的液化特性,分析含砾量对饱和砂砾土动强度和动孔压的影响规律。研究表明:含砾量对砂砾土液化性能影响较大,随着含砾量的增加砂砾土抗液化强度呈单调增加趋势;随循环周次的增加孔隙水压力不断升高,增长速率与所施加的循环应力幅值有关,同一固结压力下,振次比相同时循环动应力幅值越大动孔压比越大;破坏振次对动孔压增长模式存在影响,破坏振次较小时砂砾土动孔压增长模式呈双曲线型发展,破坏振次较大时砂砾土的动孔压增长模式可用反正弦函数来表示,且含砾量越大循环荷载引起的孔隙水压力越高;含砾量对砂砾土液化特性的影响可从砂砾土的微细观结构特征得到阐释,并借助其粒间状态参量进行分析。     

可液化地基土三维地震响应分析

编制完全耦合的三维排水有效应力动力反应分析程序，对可液化地基进行三维地震响应分析，探讨了不同土性参数、不同土层构成和不同附加压重等因素对可液化地基抗液化性能的影响。结果表明：在地震荷载作用下，天然饱和砂土地基中的超孔隙水压力随深度的增大而增大；在不同深度处，超孔压峰值到达的时刻比地震加速度峰值到达的时刻要晚；随输入地震加速度的减弱，深层处的超孔压开始消散或基本保持不变，浅层处的超孔压保持不变或略有上升，这一现象与土性参数、输入地震荷载的情况等因素有关；土性参数对土体本身的抗液化性能有重要影响，初始孔隙比越小，相对密度越大，土体的抗液化能力越强；附加压重有利于地基抗液化能力的提高；随着附加压重的增大，超孔压比减小；附加压重对地基中超孔隙水压力的增长有明显的抑制作用。     

Investigation of liquefaction and pore water pressure development in layered sands

This paper presents the results of shaking table model tests which were carried out to investigate the pore water pressure generation and related liquefaction mechanism in layered sand deposits. The experiments were performed on uniform sand columns, silt interlayered sand columns and two layered sand columns deposited at various relative densities and subjected to different input excitations. During the experiments excess pore water pressures were measured by pore pressure transducers installed at three different depths and, surface settlements and thickness of water film developed under less permeable inclusions were measured by a digital camera. The experimental results are discussed and compared to demonstrate the effects of relative density, input acceleration and presence of a silt seam on the generation of excess pore water pressure in sand deposits subjected to dynamic loading. The results showed that the presence of a less permeable silt interlayer within the sand deposit and existence of a loose sand layer underlying dense sand deposits can have significant effect on the pore water pressure generation mechanism.