微震信号自动检测的STA/LTA算法及其改进分析

通过对合成微震数据和实测微震记录的处理实验,对自动检测有效微震信号的STA/LTA(短时窗平均/长时窗平均)算法及其改进的加权系数法、多窗口算法和修正的能量比算法进行了分析和对比,给出了时窗长度、触发阈值和特征函数对算法性能的影响特征及其选取规律.与原STA/LTA算法相比,加权系数法,降低了微震事件的漏判率;多窗口算法和修正的能量比法提高了对低信噪比微震记录检测的正确率及微震到时的拾取精度.     

STA/LTA方法拾取天然地震波初至及其改进分析

长短时窗均值比（Short Term Average/Long Term Average,STA/LTA）方法因原理简单、实时性强,在地震波初至拾取中应用最为广泛．传统STA/LTA方法阈值选取依赖于人工经验,且其针对单一信号设定的阈值无法适用于不同类型的地震记录．针对此问题,本文通过建立阈值与背景噪声之间的联系,提出两种基于参考阈值拾取地震波初至新方法,即基于参考阈值的STA/LTA方法与基于参考阈值的STA/LTA改进法．首先,分析不同特征函数拾取地震波初至的灵敏度,引用关于信噪比（Signal-to-Noise Ratio,SNR）的特征函数抑制背景噪声干扰,降低阈值选取的难度;其次,给出不同背景噪声环境下阈值的计算公式,将阈值选取建立在严密的数学推导之上,提出基于参考阈值的STA/LTA方法;最后,针对天然地震背景噪声复杂,地震波初至拾取受短时强噪声干扰大的问题,通过改进时窗位置并加入取消时窗的方法提高算法的抗干扰能力,提出了基于参考阈值的STA/LTA改进法．实际地震数据处理结果表明,本文提出的两种方法能够克服固定阈值不能适用于所有地震记录的缺点,相较于传统STA/LTA方法...     

近震信号检测参数设置研究

地震信号检测是进行各种地震数据分析和处理的首要任务,STA/LTA方法具有算法简单、便于实时处理等特点,被广泛应用于地震信号检测.结合实际震例数据研究STA/LTA方法进行地震信号检测的各种影响因素,得到该方法进行检测时最合理的参数设置范围.     

STA/LTA—AIC算法对地震P波震相拾取稳定性影响

选取区域地震台网记录的地震波形数据,使用STA/LTA算法与STA/LTA—AIC算法,进行地震P波震相初至到时自动拾取,对地方震及震中距较大的震相进行P波震相拾取效果分析,发现:STA/LTA算法对于地方震P波震相识别精度较高,与STA/LTA—AIC算法拾取的P波震相初至到时相差不大;震中距变大后,STA/LTA算法对P波拾取位置相对于最佳位置向后延迟,STA/LTA—AIC算法有效矫正了STA/LTA算法拾取位置的延迟问题,与人工拾取位置差别可忽略不计。     

地震事件自动识别技术及其在南岭流动台阵的应用?

地震事件识别是地震层析成像的重要组成部分。然而,在处理宽频带流动台阵天然地震记录中识别地震事件过程中,利用传统的人工识别方法耗时巨大,效率十分低。本文首先运用STA/LTA 对地震事件进行初步判断,并结合支持向量机信号检测算法和多台联合检验法来提高地震事件判别的准确度及抗干扰能力,达到天然地震事件的自动识别。南岭流动台阵数据的应用结果表明该综合识别算法可自动快速准确地判别地震事件,并可用于地震震相的拾取。     

强噪声环境下基于信噪比的地震P波到时自动提取方法

大数据量、强噪声环境给地震P波到时的自动提取带来很大挑战.针对此问题,本文通过构建特殊的特征函数,建立SNR与STA/LTA的内在联系,提出两种基于SNR的地震P波到时自动提取方法,即基于SNR的STA/LTA方法与基于SNR的综合方法.这两种方法分别是运用SNR概念对传统STA/LTA方法和STA/LTA与AIC综合方法的改进.仿真分析结果表明:对于弱噪声环境(10dB)和一般噪声环境(6dB),本文方法较传统STA/LTA方法对地震P波到时提取的准确度更高;而对于强噪声环境(3dB),本文方法仍能准确提取地震P波到时,而传统STA/LTA方法则出现了较大的误判率(10%)与漏判率(65%).本文方法为STA/LTA赋予了明确的物理意义,使其阈值的选取建立在严密的数学推导之上.另外,本文方法在进行地震P波到时自动提取的同时,兼具数据预处理功能,无需额外的基线校正或高通滤波,因而具有较好的实时性.     

STA/LTA算法在MEMS烈度计中的适用性分析

为解决用于高密度布设的低成本MEMS烈度计集成软、硬件资源有限,且难以嵌入较为复杂算法的这一问题,基于Matlab的仿真计算,通过讨论在不同特征函数、时窗长度和短窗位置下STA/LTA值的变化趋势、拾取效果和运算时间,以选取能提高算法灵敏性、改善地震事件拾取效果和提高算法计算效率的参数,并将改进的STA/LTA算法应用于实际地震数据处理。结果表明:不同的特征函数对事件拾取率、拾取时间偏差和算法运算时间影响不同;长短时窗长度相差越大,STA/LTA值的变化越明显;时窗越长,算法运算时间越长;短窗置后可以增大STA/LTA值的变化幅度、减少算法计算量,改善算法拾取时间。改进的STA/LTA算法拾取效果更好,计算效率更高,占用内存资源更小,更适用于集成资源有限的MEMS烈度计。     

基于支持向量机和小波包的金属矿床地震数据去噪

针对深部找矿地震资料信噪比很低的问题,结合小波包和支持向量机的理论,提出了一种新的去噪算法.该算法首先从地震资料中找出噪声干扰极小的和噪声很强的数据,利用支持向量机进行训练学习,提取噪声和有效信号的样本特征.然后将地震资料实施小波包变换得到更加精细和不同频带的信号,利用支持向量机训练出的样本特征对小波包变换后的数据进行...     

基于STA/LTA算法的地脉动有效信号自动识别研究

地脉动测试已经广泛应用于工程领域,如测试计算场地特征周期,利用地脉动台阵反演土层剪切波速结构等.但是对地脉动数据规范化处理存在争议.以26个场地采集的108条地脉动测试数据为研究对象,自编反STA/LTA算法程序,从计算方法、特征函数和长短时窗时长的选取,探究STA/LTA算法对于地脉动测试数据处理的可行性.结果表明:...     

岩石超声检测信号初至的AIC自动拾取方法

岩石超声检测中最重要的一个环节是初至的拾取,然而该项工作往往费时费力,拾取精度受人为因素影响较大。为提高声波速度检测、声发射定位、以及超声层析成像的应用效率和精度,本研究将地震学中应用比较广泛的AIC初至自动提取技术引入到岩石超声检测中,并进行了适当改进。利用改进前后的AIC方法,自动拾取仿真信号和实际信号的初至,并利用长短时窗比方法(STA/LTA)和手动方法拾取了初至,同时分别与设定的实际初至进行对比。根据实验结果,对于信噪比较低的信号AIC方法要优于STA/LTA方法;改进前的AIC方法适用于起跳干脆、幅度变化大的信号,而改进后的AIC方法则适用于起跳较平缓的信号,且拾取到的初至与手动拾取的初至更加接近。      

SCIENCE CHINA Earth Sciences SUBJECT INDEX TO VOLUME 57(2014)

正~~     

Distribution of throughfall and stemflow in multi‐strata agroforestry,perennial monoculture,fallow and primary forest in central Amazonia,Brazil

The partitioning of rain water into throughfall, stemflow and interception loss when passing through plant canopies depends on properties of the respective plant species, such as leaf area and branch angles. In heterogeneous vegetation, such as tropical forest or polycultural systems, the presence of different plant species may consequently result in a mosaic of situations with respect to quantity and quality of water inputs into the soil. As these processes influence not only the water availability for the plants, but also water infiltration and nutrient leaching, the understanding of plant effects on the repartitioning of rain water may help in the optimization of land use systems and management practices. We measured throughfall and stemflow in a perennial polyculture (multi‐strata agroforestry), monocultures of peach palm (Bactris gasipaes) for fruit and for palmito, a monoculture of cupuaçu (Theobroma grandiflorum), spontaneous fallow and primary forest during one year in central Amazonia, Brazil. The effect on rain water partitioning was measured separately for four useful tree species in the polyculture and for two tree species in the primary forest. Throughfall at two stem distances, and stemflow, differed significantly between tree species, resulting in pronounced spatial patterns of water input into the soil in the polyculture system. For two tree species, peach palm for fruit (Bactris gasipaes) and Brazil nut trees (Bertholletia excelsa), the water input into the soil near the stem was significantly higher than the open‐area rainfall. This could lead to increased nutrient leaching when fertilizer is applied close to the stem of these trees. In the primary forest, such spatial patterns could also be detected, with significantly higher water input near a palm (Oenocarpus bacaba) than near a dicotyledonous tree species (Eschweilera sp.). Interception losses were 6·4% in the polyculture, 13·9 and 12·3% in the peach palm monocultures for fruit and for palmito, respectively, 0·5% in the cupuaçu monoculture and 3·1% in the fallow. With more than 20% of the open‐area rainfall, the highest stemflow contributions to the water input into the soil were measured in the palm monocultures and in the fallow. Copyright © 1999 John Wiley & Sons, Ltd.     

A Monte Carlo study of rainfall forecasting with a stochastic model

A procedure for short-term rainfall forecasting in real-time is developed and a study of the role of sampling on forecast ability is conducted. Ground level rainfall fields are forecasted using a stochastic space-time rainfall model in state-space form. Updating of the rainfall field in real-time is accomplished using a distributed parameter Kalman filter to optimally combine measurement information and forecast model estimates. The influence of sampling density on forecast accuracy is evaluated using a series of a simulated rainfall events generated with the same stochastic rainfall model. Sampling was conducted at five different network spatial densities. The results quantify the influence of sampling network density on real-time rainfall field forecasting. Statistical analyses of the rainfall field residuals illustrate improvement in one hour lead time forecasts at higher measurement densities.     

Anthropogenic Eutrophication and Red Tide Outbreak in Lacustrine Systems of the Kashmir Himalaya

Red tide, a recurrent phenomenon has become conspicuous in several Kashmir lake ecosystems since 1991. The responsible organism (Euglena pedunculata), a rare flagellate rediscovered in the Kashmir Himalaya (Khan 1993) caused first and unprecedented red tide outbreak, constituting a maximum of 96% of resident numerical phytoplankton density in Dal Lake. At present, conflicting hypotheses exist on the generation of causal assemblage(s) imparting redness to waters: Jeeji Bai (1991) linked its origin to acid precipitation – a fallout of burning oil‐fields during the Gulf War – whilst Khan (1993) holds local factor(s) responsible. Field/experimental studies support the latter contention that the influx of untreated sewage, in unison with warm temperatures, high levels of PhAR, iron and interruption to hydrological flow‐pattern together with absence/or reduction in grazing activity created conducive environmental milieu for red tide outbreak. Dal Lake “red tide” drifted the bloom‐inoculum to other waters, including Lake Wular, where additional ecological niches were carved out, threatening the aesthetic value and biological diversity of Kashmir lakes. Ecological monitoring indicates frequent seasonal red tide occurrence in Dal Lake (including summer‐autumn event of 1998) which testifies its unabated eutrophication status. Further studies are needed on ecological adaptability and biogeographic distribution of this rare and unique red tide‐causing flagellate.