典型矩形高层建筑风荷载与风振响应分析

对典型矩形高层建筑进行风洞试验,根据试验结果计算了各风向角下的等效静风荷载和风振响应,同时采用《建筑结构荷载规范》(GB50009-2012)计算方法对该建筑正交角度下的风荷载进行计算,结合风洞试验风荷载与规范计算结果,研究典型矩形高层建筑等效静风荷载和加速度响应分布规律。结果表明:结构基底风致响应最不利角度并非完全出现在正交角度,风洞试验楼层风荷载整体趋势与规范计算结果相同,数值上存在差异,宜以风洞试验结果为准,该结构的顶层加速度响应小于高规限值,舒适度满足要求。     

Longitudinal integral response deformation method for the seismic analysis of a tunnel structure

For the longitudinal seismic response analysis of a tunnel structure under asynchronous earthquake excitations, a longitudinal integral response deformation method classified as a practical approach is proposed in this paper. The determinations of the structural critical moments when maximal deformations and internal forces in the longitudinal direction occur are deduced as well. When applying the proposed method, the static analysis of the free-field computation model subjected to the least favorable free-field deformation at the tunnel buried depth is performed first to calculate the equivalent input seismic loads. Then, the equivalent input seismic loads are imposed on the integral tunnel-foundation computation model to conduct the static calculation. Afterwards, the critical longitudinal seismic responses of the tunnel are obtained. The applicability of the new method is verified by comparing the seismic responses of a shield tunnel structure in Beijing, determined by the proposed procedure and by a dynamic time-history analysis under a series of obliquely incident out-ofplane and in-plane waves. The results show that the proposed method has a clear concept with high accuracy and simple progress. Meanwhile, this method provides a feasible way to determine the critical moments of the longitudinal seismic responses of a tunnel structure. Therefore, the proposed method can be effectively applied to analyze the seismic response of a long-line underground structure subjected to non-uniform excitations.     

Multivariate stationary non-Gaussian process simulation for wind pressure fields

Stochastic simulation is an important means of acquiring fluctuating wind pressures for wind induced response analyses in structural engineering. The wind pressure acting on a large-span space structure can be characterized as a stationary non-Gaussian field. This paper reviews several simulation algorithms related to the Spectral Representation Method (SRM) and the Static Transformation Method (STM). Polynomial and Exponential transformation functions (PSTM and ESTM) are discussed. Deficiencies in current algorithms, with respect to accuracy, stability and efficiency, are analyzed, and the algorithms are improved for better practical application. In order to verify the improved algorithm, wind pressure fields on a large-span roof are simulated and compared with wind tunnel data. The simulation results fit well with the wind tunnel data, and the algorithm accuracy, stability and efficiency are shown to be better than those of current algorithms.     

高层建筑动态和静态风荷载的确定

简单介绍了利用高频天平测量高层建筑风荷载的原理和试验方法，讨论了高层建筑风响应的计算，提出了一种动态风荷载和静态风荷载沿高度分布的计算方法。结果分析指出：提出的求沿高层建筑高度分布的等效静态风荷载的方法适用于顺风向风力，应用于横风向风力有理论误差。     

Research on wind-induced responses of a large-scale membrane structure

The wind-induced responses of a large-scale membrane structure, Expo Boulevard, are evaluated in this study. To obtain the wind pressure distribution on the roof surface, a wind tunnel test is performed. A brief analysis of wind pressure on the membrane roof is conducted first and then an analysis of the wind-induced responses of the structure is carried out using a numerical integral method in the time domain. In the process of calculation, the geometrical nonlinearity is taken into account. Results indicate that mean, RSM and peak values of the structure responses increase nonlinearly while the approaching flow velocity increases. Strong nonlinear characteristics are observed in the displacement responses, whereas the responses of nodal stress and cable axial force show minimal nonlinear properties when the membrane structure is subjected to wind loads. Different values of the damping ratio only have a minimal impact on the RSM response of the structure because the background component is a dominant part of the total dynamic response and the resonant component is too small. As the damping ratio increases from 0.02 to 0.05, the RMS responses of vertical displacement, nodal stress and cable axial force decrease by 8.1%, 6.7% and 17.9%, respectively. Since the mean component plays a significant role in the wind-induced response, the values of the gust response factor are not high for Expo Boulevard.     

A new framework for evaluating along-wind responses of a transmission tower

In this paper, an analytical framework to evaluate the along-wind-induced dynamic responses of a transmission tower is presented. Two analytical models and a new method are developed: (1) a higher mode generalized force spectrum (GFS) model of the transmission tower is deduced; (2) an analytical model that includes the contributions of the higher modes is further derived as a rational algebraic formula to estimate the structural displacement response; and (3) a new approach, applying load with displacement (ALD) instead of force, to solve the internal force of transmission tower is given. Unlike conventional methods, the ALD method can avoid calculating equivalent static wind loads (ESWLs). Finally, a transmission tower structure is used as a numerical example to verify the feasibility and accuracy of the ALD method.     

Full-scale tests of wind effects on a long span roof structure

Full-scale measurements are regarded as the most reliable method to evaluate wind effects on large buildings and structures. Some selected results are presented in this paper from the full-scale measurement of wind effects on a long-span steel roof structure during the passage of Typhoon Fanapi. Some fi eld data, including wind speed and direction, acceleration responses, etc., were continuously and simultaneously recorded during the passage of the typhoon. Comprehensive analysis of the measured data is conducted to evaluate the typhoon-generated wind characteristics and its effects on a long-span steel roof. The fi rst four natural frequencies and their vibration mode shapes of the Guangzhou International Sports Arena(GISA) roof are evaluated by the stochastic subspace identifi cation(SSI) method and comparisons with those from fi nite element(FE) analysis are made. Meanwhile, damping ratios of the roof are also identifi ed by the SSI method and compared with those identifi ed by the random decrement method; the amplitude-dependent damping behaviors are also discussed. The fullscale measurement results are further compared with the corresponding wind tunnel test results to evaluate its reliability. The results obtained from this study are valuable for academic and professional engineers involved in the design of large-span roof structures.     

弦支穹顶结构动力反应分析

以天津开发区商务中心大堂的弦支穹顶为研究对象,分析了弦支穹顶结构体系的自振特性,分别运用随机模拟风振分析方法和时间历程分析方法,对其进行了风振和地震反应分析,得到了结构在动力荷载作用下的响应时程,并对分析结果进行了频谱分析和统计分析。研究发现弦支穹顶结构的自振频率呈密集型分布,且振型复杂;结构的风振响应基本以受迫振动为主,没有出现明显的峰值共振现象;结构的地震响应在前几阶基频处出现了较为明显的峰值共振现象;从振动的幅值角度看,风荷载的动力作用效应相对于地震荷载要显著。     

Equivalent linear method considering frequency dependent characteristics of stiffness and damping

Equivalent linear dynamic response analysis of ground is based on complex moduli and Fourier series expansion; therefore, it is not an equivalent method but an approximate method. Two deficiencies in the conventional equivalent linear method represented by SHAKE are described first. The maximum shear strength is overestimated, resulting in overestimation of the peak acceleration under a strong ground motion, and the amplification is underestimated at high frequency. The latter sometimes results in underestimation of the peak acceleration under weak ground shaking, and gives an incident wave with unrealistic large accelerations or a divergence of analysis in deconvolution analysis under strong ground motion. Both deficiencies are shown to come from the same cause, i.e. computing the effective strain as a constant fraction of the maximum strain. Since this is a key concept of the equivalent linear analysis, one cannot overcome both deficiencies at the same time in the conventional method. An apparent frequency dependence in stiffness and damping is shown to appear in the dynamic response, although soil itself does not show frequency dependent characteristics. Following this observation, the effective strain is expressed in terms of frequency from the similarity concept of the strain–frequency relationship between time domain and frequency domain. This enables the reduction of both deficiencies at the same time, resulting in a marked improvement in the equivalent linear analysis. The accuracy of the proposed method is examined by the simulations of three vertical array records during large earthquakes. The proposed method always gives much better prediction than conventional equivalent linear methods for both convolution and deconvolution analyses, and it is confirmed to be applicable at more than 1% shear strain.     

新型超高层节能建筑抗风研究

在大气边界层风洞进行了"珠江城"商务写字楼大比例尺(1:150)模型风洞试验,通过对风洞试验数据分析,获得了基础等效静风荷载及结构顶部风致加速度响应。并将其结果与其它较小比例尺的两个风洞试验结果相对比,分析了模型几何缩尺比、周边建筑及平均风剖面对试验结果的影响。获得的结果可以为此结构设计提供风荷载,同时也为其他建筑的抗风设计和风洞实验提供技术参考。     

Consolidation of inelastic clays under rectangular cyclic loading

This paper presents a semi-analytical solution for one dimensional consolidation problem of inelastic clays under cyclic loading considering the effect of the change of the consolidation coefficient of the soil layer. Due to change of the consolidation coefficient, and time-dependant loading, Terzaghi's theory would not be applicable in cyclic conditions. In this research, a method based on the time variable exchange along with the superimposing rule is employed to overcome these shortcomings. Changes in the consolidation coefficient are applied in the solution by modifying the loading and unloading durations introducing a Virtual Time. Based on the superimposing rule a set of continuous static loads in specified times are used instead of the cyclic load in the transformed time space. Each full cycle of loading is replaced by a pair of static loads with different signs. Based on the Terzaghi's theory the pore-water pressure distribution and the degree of consolidation are calculated for each static load and the results are superimposed. A set of laboratory consolidation tests under cyclic load and numerical analysis are performed in order to verify the presented method. The numerical solution and laboratory tests results showed the accuracy of the presented method.     

Shaking table test and numerical analysis of offshore wind turbine tower systems controlled by TLCD

A wind turbine system equipped with a tuned liquid column damper(TLCD) is comprehensively studied via shaking table tests using a 1/13-scaled model. The effects of wind and wave actions are considered by inputting responseequivalent accelerations on the shaking table. The test results show that the control effect of the TLCD system is significant in reducing the responses under both wind-wave equivalent loads and ground motions, but obviously varies for different inputs. Further, a blade-hub-tower integrated numerical model for the wind turbine system is established. The model is capable of considering the rotational effect of blades by combining Kane’s equation with the finite element method. The responses of the wind tower equipped with TLCD devices are numerically obtained and compared to the test results, showing that under both controlled and uncontrolled conditions with and without blades’ rotation, the corresponding responses exhibit good agreement. This demonstrates that the proposed numerical model performs well in capturing the wind-wave coupled response of the offshore wind turbine systems under control. Both numerical and experimental results show that the TLCD system can significantly reduce the structural response and thus improve the safety and serviceability of the offshore wind turbine tower systems. Additional issues that require further study are discussed.     

基于能力谱法的SSI体系抗震pushover分析方法

本文首先经过2次等效将土与结构相互作用的多自由度体系等效为单自由度体系,并给出了修正反应谱和等价能力谱的确定方法,进而提出了基于能力谱法考虑土与结构动力相互作用(SSI)效应的结构体系pushover分析方法(SSIPA);然后对3种不同高度考虑SSI效应的结构体系在5条地震动作用下采用本文提出的方法进行了算例分析,将结果与非线性时程分析的结果进行了比较,研究了本方法的适用性和准确性;最后,与建筑抗震设计规范的设计反应谱相结合,对9层考虑SSI效应的钢结构用本文提出的方法进行了弹塑性地震反应分析,根据我国抗震设计规范的规定进行抗震性能的评估验证了本方法的可行性。     

大跨预应力混凝土空间框架结构的地震振动台试验研究

利用地震振动台对大跨预应力混凝土井式梁空间框架结构的抗震性能进行了实验研究。两个模型的实验结果表明：(1)大跨预应力井式梁空间框架结构可以提供大的楼层平面内刚度；(2)对称大跨预应力井式梁空间框架结构，可以不考虑耦合地震反应；(3)大跨预应力井式梁空间框架结构的竖向地震反应中心大而周边小；(4)在相同加速度但不同的地震波作用下，结构的竖向地震反应不同。     

土工三轴试验方法-静动耦合试验

尝试了一种新的土工三轴试验方法,即在一个试样同时得到与土体静动变形和强度特性相关的各种参数。文中讨论了采用耦合试验方法时应变循环大小对静力变形和强度特性的影响;并通过与常规试验结果的比较,给出了等效弹性模量、等效阻尼比和动永久应变等动力变形参数的试验结果。试验结果表明：采用耦合试验复杂加载方式,能够更深入地研究土体的静、动变形和强度特性,尤其在复杂应力条件下的动力变形特性方面。     

Principal axes of M-DOF structures part I: Static loading

This paper is the first in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and control modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended control devices/systems, and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects - of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading. This first paper deals with quantitative definitions of principal axes and “cross effects” of three-dimensional structures under static load by using linear algebra. It shows theoretically that, for three-dimensional structures, such principal axes rarely exist. Under static loading conditions, the cross effect is typically small and negligible from the viewpoint of engineering applications. However, it provides the theoretical base for subsequent quantification of the response couplings under dynamic loads, which is reported in part II of this series.     

Correlating measured and simulated dynamic responses of a tall building to long‐distance earthquakes

For almost a decade, a 66‐storey, 280m tall building in Singapore has been instrumented to monitor its dynamic responses to wind and seismic excitations. The dynamic characteristics of the tall building have been investigated via both the finite element method and the experimental modal analysis. The properties of the finite element model have been shown to correlate well with those derived from the data recorded during the ambient vibration tests. During the study period, 21 sets of earthquake ground motions have been recorded at the building site. The basement motions may be divided into three categories based on their predominant frequency components with respect to the building's fundamental frequency. The calibrated three‐dimensional finite element model is employed to simulate the seismic response of the tall building. Correlation analysis of the time histories between the recorded data and the simulated results has been carried out. The correlation analysis results show that the simulated dynamic response time histories match well with those of the recorded dynamic responses at the roof level. The results also show that the simulated maximum response at the roof level is close to the peak response recorded during the earthquakes. Copyright © 2004 John Wiley & Sons, Ltd.     

LQG control of lateral–torsional motion of Nanjing TV transmission tower

The 310 m Nanjing TV transmission tower in China will be installed with an active mass driver on the upper observation deck in order to reduce the acceleration responses under strong wind gusts. This paper presents the linear–quadratic–Gaussian (LQG) control strategy using acceleration feedback to reduce the tower responses under coupled lateral–torsional motion. Emphasis is placed on the practical applications, such as the limitations on actuator peak force and stroke, limited number of sensors, etc. The along‐ and across‐wind components of the wind velocity are defined by the cross‐power spectra. In the simulation analysis, both deterministic and stochastic approaches have been used, and the power spectral density, rms values and peak values of response quantities have been computed. Comparisons of the responses of the TV tower due to wind loads from different angles of attack have been made. Simulation results demonstrate that (i) the performance of the active mass driver using the LQG control strategy is remarkable in reducing coupled lateral‐torsional motions of the tower, and (ii) the LQG strategy is robust with respect to uncertainties in the angle of attack of wind loads. The LQG strategy is suitable for the full‐scale implementation of active mass driver on Nanjing Tower. Copyright © 2000 John Wiley & Sons, Ltd.     

Dynamic analysis of offshore wind turbine in clay considering soil–monopile–tower interaction

A comprehensive study is performed on the dynamic behavior of offshore wind turbine (OWT) structure supported on monopile foundation in clay. The system is modeled using a beam on nonlinear Winkler foundation model. Soil resistance is modeled using American Petroleum Institute based cyclic p–y and t–z curves. Dynamic analysis is carried out in time domain using finite element method considering wind and wave loads. Several parameters, such as soil–monopile–tower interaction, rotor and wave frequencies, wind and wave loading parameters, and length, diameter and thickness of monopile affecting the dynamic characteristics of OWT system and the responses are investigated. The study shows soil–monopile–tower interaction increases response of tower and monopile. Soil nonlinearity increases the system response at higher wind speed. Rotor frequency is found to have dominant role than blade passing frequency and wave frequency. Magnitude of wave load is important for design rather than resonance from wave frequency.     

基于输电塔风致响应的节点螺栓脱落损伤自动诊断的小波识别方法

以法兰螺栓联结为节点连接型式的输电塔架结构是一类应用广泛的结构型式。其中节点螺栓脱落损伤是一种常见的损伤形式。为了确保电力工业的正常运行,及时进行法兰联结节点螺栓松动损伤的诊断是十分必要的。本文依据输电塔结构塔身竖杆法兰联结节点风致响应的特点,推导了只与结构的损伤程度有关,与外加的风荷载无关的塔身竖杆节点风致竖向应变响应方差的归一化公式,并借助于噪声抑制能力强且对突变信号敏感的小波变换方法对该统计方差进行了小波变换分析,达到了对螺栓脱落损伤位置的有效识别,实际输电塔法兰螺栓松动损伤的仿真分析表明,本文提出的方法是有效而可行的,具有一定的实践价值。