A new technique for moment tensor inversion with applications to the 2008 Wenchuan <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>8.0 earthquake sequence

A M_S8.0 earthquake occurred in Wenchuan County, Sichuan Province, China, on May 12, 2008, and subsequently, numerous aftershocks followed. We obtained the moment tensor solutions and source time functions (STFs) for the Wenchuan earthquake and its seven larger aftershocks (M_S5.0～6.0) by a new technique of moment tensor inversion using the broadband and long-period seismic waveform data from the Global Seismic Network (GSN). Firstly, the theoretical background and technical flow of the new technique was briefly introduced, and an aftershock of the Wenchuan earthquake sequence was employed to illustrate the real procedure for inverting the moment tensor; secondly, the moment tensor solutions and STFs of the eight events, including the main shock, were presented, and finally, the interpretation of the results was made. The agreement of our results with the GCMT results indicates the new approach is efficient and feasible. By using this approach, not only the moment tensor solution can be obtained but also the STF can be retrieved; the inverted STFs indicate that the source rupture process may be complicated even for the moderate earthquakes. The inverted focal mechanisms of the Wenchuan earthquake sequence show that the most of the aftershocks occurred in the main faults of the Longmenshan fault zone with predominantly thrustingwith minor right-lateral strike-slip component, but some of them may have occurred in the subfaults with strike-slip faulting in the vicinity of the main faults.     

A new technique for moment tensor inversion with applications to the 2008 Wen-chuan M_s8.0 earthquake sequence

A MS8.0 earthquake occurred in Wenchuan County, Sichuan Province, China, on May 12, 2008, and subsequently, numerous aftershocks followed. We obtained the moment tensor solutions and source time functions (STFs) for the Wenchuan earthquake and its seven larger aftershocks (MS5.0~6.0) by a new technique of moment tensor inversion using the broadband and long-period seismic waveform data from the Global Seismic Network (GSN). Firstly, the theoretical background and technical flow of the new technique was brie...     

2022年门源MS6.9和2016年门源MS6.4地震序列比较分析

2022年1月8日青海省海北州门源县发生M_S6.9地震,震中距离2016年1月21日门源M_S6.4地震震中约33km,两次门源地震均发生在冷龙岭断裂附近,但在震源机制、主发震断层破裂过程及地震序列余震活动等方面显著不同。针对两次门源地震序列的比较分析,对研究冷龙岭断裂及其附近区域强震序列和余震衰减特征等具有重要研究意义。通过对比分析2022年门源M_S6.9地震和2016年门源M_S6.4地震余震的时空演化特征,发现二者在震源过程和断层破裂尺度上存在明显差异,前者发震断层破裂充分,震后能量释放充分,余震丰富且震级偏高;而后者发震断层未破裂至地表,余震震级水平偏低。综合分析两次门源地震序列表现出来的差异性,认为其可能与地震发震断层的破裂过程密切相关,且同时受到区域构造环境的影响。     

2015年11月23日青海祁连MS5.2地震震源机制解及发震构造初步探讨

采用CAP（Cut and Paste）方法反演了2015年11月23日青海祁连M_S5.2主震的震源机制解,其最佳双力偶解：节面Ⅰ走向109°、倾角58°、滑动角21°,节面Ⅱ走向8°、倾角72°、滑动角146°,矩震级M_W5.16,矩心震源深度约为9 km。结合震区的活动构造,判定发震断层面为节面Ⅰ,推测托勒山北缘活动断裂中段为此次地震的发震断裂。     

Spatio-temporal variation and focal mechanism of the Wenchuan MS8.0 earthquake sequence

Based on abundant aftershock sequence data of the Wenchuan M_S8.0 earthquake on May 12, 2008, we studied the spatio-temporal variation process and segmentation rupture characteristic. Dense aftershocks distribute along Longmenshan central fault zone of NE direction and form a narrow strip with the length of 325 km and the depth between several and 40 km. The depth profile (section of NW direction) vertical to the strike of aftershock zone (NE direction) shows anisomerous wedgy distribution characteristic of aftershock concentrated regions; it is related to the force form of the Longmenshan nappe tectonic belt. The stronger aftershocks could be divided into northern segment and southern segment apparently and the focal depths of strong aftershocks in the 50 km area between northern segment and southern segment are shallower. It seems like 'to be going to rupture' segment. We also study focal mechanisms and segmentation of strong aftershocks. The principal compressive stress azimuth of aftershock area is WNW direction and the faulting types of aftershocks at southern and northern segment have the same proportion. Because aftershocks distribute on different secondary faults, their focal mechanisms present complex local tectonic stress field. The faulting of seven strong earthquakes on the Longmenshan central fault is mainly characterized by thrust with the component of right-lateral strike-slip. Meantime six strong aftershocks on the Longmenshan back-range fault and Qingchuan fault present strike-slip faulting. At last we discuss the complex segmentation rupture mechanism of the Wenchuan earthquake.     

Moment tensor inversion and source rupture process of the September 27, 2003 M S=7.9 earthquake occurred in the border area of China, Russia and Mongolia

We conducted moment tensor inversion and studied source rupture process for M _S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock distribution and the tectonic settings around the epicentral area, we propose that the M _S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of M _S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M ₀=0.97×10²⁰ N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the M _S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.     

2021年青海玛多MS7.4地震精定位和发震构造初探

2021年5月22日青海省果洛州玛多县发生M_S7.4地震。为探究本次地震的发震构造及余震分布特征,选取2021年5月1日—6月3日青海测震台网观测到的33°～36°N,97°～99.5°E空间范围内的地震观测报告,利用双差精定位方法进行双差精定位处理。重定位后整体残差平均减小了0.23,深度在5～25 km间随机分布。根据地震迁移方向和震区地质构造,认为本次地震的发震构造为昆仑山口—江错断裂,玛多—甘德东段受主震触发影响爆发一系列小震,两条断裂之间可能因为本次地震产生一定联系。本次地震产生新的断裂,突破了两条断裂之前的空区,连接到玛多—甘德断层,使两条断层交叉相连,形成新的断层构造。     

Structural analysis and interpretation of the surface deformation associated with the Ning’er, Yunnan Province, China M S6.4 earthquake of June 3, 2007

The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province MS6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, land-slide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mecha-nism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er MS6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of MS≥2 is 330°, and the focal depths are within the range of 3~12 km, predominantly within 3~10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic     

九寨沟M_S7.0地震震源机制解及构造应力场研究

2017年8月8日四川九寨沟县发生M_S7.0地震。根据中国地震台网固定台站的记录波形,利用gCAP方法和P波初动符号反演方法求解了主震的震源机制解,其结果与哈佛CMT震源机制解、美国地质勘探局发布的震源机制以及中国地震局发布的各震源机制解有很好的一致性。此外,还求解了九寨沟地震震中附近2010—2016年间28次小震的震源机制解,利用得到的小震震源机制解反演了该区域的构造应力场。结果表明,这一区域构造应力场的最大应力轴与最小应力轴均为水平方向,其中最大应力轴方向为NWW方向,最小应力轴方向为SSW方向。     

基于Sentinel-1A数据反演漾濞MS6.4地震的同震形变场及断层几何参数

2021年5月21日晚21时48分,云南省大理州漾濞县(震中:25.67°N,99.87°E)发生M_S6.4地震,震源深度8 km。为快速获得此次地震同震形变场及断层几何参数,研究该次地震的发震构造等,文章基于震前、震后的sentinel-1A卫星升降轨SAR数据进行二轨法差分雷达干涉测量(DInSAR),并基于Okada弹性半空间位错模型反演断层几何参数。研究结果如下:(1)此次地震造成的同震形变场长约19 km,宽约20 km;(2)升轨雷达视线向最大形变约为8.2 cm,降轨雷达视线向最大形变约为8.7 cm;(3)地震断层走向为313.7°,倾角为87°,滑动角为175°,为右旋走滑型断层,最大滑动量为0.79 m,反演得出的地震矩为1.48×10~(18) N·m,矩震级为M_W6.1。在川滇块体向南挤出的构造背景下,块体西边界的维西—乔后断裂、红河断裂发生右旋走滑,本次地震便是维西—乔后断裂南段分支断裂右旋走滑活动的体现。     

Structural analysis and interpretation of the surface deformation associated with the Ning’er,Yunnan Province,China <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>6.4 earthquake of June 3, 2007

The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province M_S6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, landslide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mechanism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er M_S6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of M_S≥2 is 330°, and the focal depths are within the range of 3～12 km, predominantly within 3～10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic framework might be the main cause of the frequent occurrence of M_S6.0～6.9 earthquakes in the area.     

A Preliminary Analysis of the Seismogenic Structure of the Akto MS6.7 Earthquake Sequence on November 25, 2016

In this study,data from the Xinjiang regional network and IRIS shared global stations are used to relocate the Akto M_S6. 7 earthquake sequence on November 25,2016 by using double difference location method. Three earthquakes of M_S4. 8,M_S6. 7 and M_S5. 0 are inverted by using the g CAP method,and the focal mechanism solutions are obtained.According to the results of relocating,the location of the main shock is 39. 22°N,73. 98°E,the distribution of the earthquake sequence is about 70 km in length,and the focal depth is mainly within the range of 5-20 km. The plane and depth profiles of the earthquake sequence show that aftershocks extended in SEE direction after the main shock and the dip angle of fault plane is steep. Focal mechanism results show that the three earthquakes are characterized by strike-slip movement. Based on the results of field geological investigation,it is inferred that the seismogenic fault of the Akto earthquake is Muji fault,which is located at the northernmost end of the Kongur extensional system.The possible cause of this earthquake is that the Indian Plate continues to push northward,and during this compression process,the Indian Plate is affected by the clockwise rotation of the Tarim basin,which causes the accumulation of right-lateral action of the Muji fault,resulting in this earthquake.     

汶川8.0级大震的余震最大强度用科里奥利力效应方法的判定

用科里奥利力效应预测强余震是一种震源物理的方法。回顾2008年汶川8.0级大震时用该方法判定余震最大强度的过程,半定性与综合判定为可能发生的最大余震强度为6.5级左右,实际发生了6.4级地震,与主震震级相差大于1级（M_主—M_余=1.6）。验证结果进一步说明该方法的科学性,给科里奥利力效应判定余震增加了一个可靠的判例。     

Relocation of the MS5.7 Earthquake Sequence in Songyuan, Jilin Province, 2018 and the Analysis of Its Seismogenic Structure

The 2018,Songyuan,Jilin M_S5. 7 earthquake occurred at the intersection of the FuyuZhaodong fault and the Second Songhua River fault. The moment magnitude of this earthquake is M_W5. 3,the centroid depth by the waveform fitting is 12 km,and it is a strike-slip type event. In this paper,with the seismic phase data provided by the China Earthquake Network, the double-difference location method is used to relocate the earthquake sequence,finally the relocation results of 60 earthquakes are obtained. The results show that the aftershock zone is about 4. 3km long and 3. 1km wide,which is distributed in the NE direction. The depth distribution of the seismic sequence is 9km-10 km. 1-2 days after the main shock,the aftershocks were scattered throughout the aftershock zone,and the largest aftershock occurred in the northeastern part of the aftershock zone. After 3-8 days,the aftershocks mainly occurred in the southwestern part of the aftershock zone. The profile distribution of the earthquake sequence shows that the fault plane dips to the southeast with the dip angle of about 75°. Combined with the regional tectonic setting,focal mechanism solution and intensity distribution,we conclude that the concealed fault of the Fuyu-Zhaodong fault is the seismogenic fault of the Songyuan M_S5. 7 earthquake. This paper also relocates the earthquake sequence of the previous magnitude 5. 0 earthquake in 2017. Combined with the results of the focal mechanism solution,we believe that the two earthquakes have the same seismogenic structure,and the earthquake sequence generally develops to the southwest. The historical seismic activity since 2009 shows that after the magnitude 5. 0 earthquake in 2017,the frequency and intensity of earthquakes in the earthquake zone are obviously enhanced,and attention should be paid to the development of seismic activity in the southwest direction of the earthquake zone.     

Tempo-spatial rupture process of the 1997 Mani, Xizang (Tibet), China earthquake of M S=7.9

An earthquake of M _S=7.4 occurred in Mani, Xizang (Tibet), China on November 8, 1997. The moment tensor of this earthquake was inverted using the long period body waveform data from China Digital Seismograph Network (CDSN). The apparent source time functions (ASTFs) were retrieved from P and S waves, respectively, using the deconvolution technique in frequency domain, and the tempo-spatial rupture process on the fault plane was imaged by inverting the azimuth dependent ASTFs from different stations. The result of the moment tensor inversion indicates that the P and T axes of earthquake-generating stress field were nearly horizontal, with the P axis in the NNE direction (29°), the T axis in the SEE direction (122°) and that the NEE-SWW striking nodal plane and NNW-SSE striking nodal plane are mainly left-lateral and right-lateral strike-slip, respectively; that this earthquake had a scalar seismic moment of 3.4×10²⁰ N·m, and a moment magnitude of M _W=7.6. Taking the aftershock distribution into account, we proposed that the earthquake rupture occurred in the fault plane with the strike of 250°, the dip of 88° and the rake of 19°. On the basis of the result of the moment tensor inversion, the theoretical seismograms were synthesized, and then the ASTFs were retrieved by deconvoving the synthetic seismograms from the observed seismograms. The ASTFs retrieved from the P and S waves of different stations identically suggested that this earthquake was of a simple time history, whose ASTF can be approximated with a sine function with the half period of about 10 s. Inverting the azimuth dependent ASTFs from P and S waveforms led to the image showing the tempo-spatial distribution of the rupture on the fault plane. From the "remembering" snap-shots, the rupture initiated at the western end of the fault, and then propagated eastward and downward, indicating an overall unilateral rupture. However, the slip distribution is non-uniform, being made up of three sub-areas, one in the western end, about 10 km deep ("western area"); another about 55 km away from the western end and about 35 km deep ("eastern area"); the third about 30 km away from the western end and around 40 km deep ("central area"). The total rupture area was around 70 km long and 60 km wide. From the "forgetting" snap-shots, the rupturing appeared quite complex, with the slip occurring in different position at different time, and the earthquake being of the characteristics of "healing pulse". Another point we have to stress is that the locations in which the rupture initiated and terminated were not where the main rupture took place. Eventually, the static slip distribution was calculated, and the largest slip values of the three sub-areas were 956 cm, 743 cm and 1 060 cm, for the western, eastern and central areas, respectively. From the slip distribution, the rupture mainly distributed in the fault about 70 km eastern to the epicenter; from the aftershock distribution, however, the aftershocks were very sparse in the west to the epicenter while densely clustered in the east to the epicenter. It indicated that the Mani M _S=7.9 earthquake was resulted from the nearly eastward extension of the NEE-SWW to nearly E-W striking fault in the northwestern Tibetan plateau. Contribution No. 99FE2016, Institute of Geophysics, China Seismological Bureau. This work is supported by SSTCC Climb Project 95-S-05 and NSFDYS 49725410.     

Source parameters of the Gonghe,Qinghai Province,China,earthquake from inversion of digital broadband waveform data

ＳｏｕｒｃｅｐａｒａｍｅｔｅｒｓｏｆｔｈｅＧｏｎｇｈｅ，ＱｉｎｇｈａｉＰｒｏｖｉｎｃｅ，Ｃｈｉｎａ，ｅａｒｔｈｑｕａｋｅｆｒｏｍｉｎｖｅｒｓｉｏｎｏｆｄｉｇｉｔａｌｂｒｏａｄｂａｎｄｗａｖｅｆｏｒｍｄａｔａＬＩ－ＳＨＥＮＧＸＵ（许立生）ａｎｄＹＵＮ...     

2020年云南巧家M_S5.0地震微震检测及发震构造初步探讨

利用匹配定位方法对2020年5月18日云南巧家M_S5.0地震震后24h震源附近台站记录的连续波形进行遗漏地震扫描和定位,共识别出327个地震事件,约为台网目录的2.4倍,最小完整震级由最初的M_L1.9降至M_L1.1。随后,依据最新目录计算了震后震源区的b值,并结合余震展布形态,初步分析此次地震发震构造。研究结果显示,余震序列在平面上显示出NNW-SSE优势展布方向,长度约14km,震源优势深度集中在3～15km;深度剖面展示出主震的发震断层面较陡,并且具有向西倾的趋势。综合主震震源机制解、余震展布形态和周边地质构造背景,认为巧家M_S5.0地震发震断层可能为NNW-SSE向走滑性质的断裂,与2014年鲁甸MS6.5地震的发震构造密切相关。     

The seismicity and tectonic stress field characteristics of the Longmenshan fault zone before the Wenchuan MS8.0 earthquake

The seismicity of Longmenshan fault zone and its vicinities before the 12 May 2008 Wenchuan M_S8.0 earthquake is studied. Based on the digital seismic waveform data observed from regional seismic networks and mobile stations, the focal mechanism solutions are determined. Our analysis results show that the seismicities of Longmenshan fault zone before the 12 May 2008 Wenchuan earthquake were in stable state. No obvious phenomena of seismic activity intensifying appeared. According to focal mechanism solutions of some small earthquakes before the 12 May 2008 Wenchuan earthquake, the direction of principal compressive stress P-axis is WNW-ESE. The two hypocenter fault planes are NE-striking and NW-striking. The plane of NE direction is among N50°?70°E, the dip angles of fault planes are 60°?70° and it is very steep. The faultings of most earthquakes are dominantly characterized by dip-slip reverse and small part of faultings present strike-slip. The azimuths of principal compressive stress, the strikes of source fault planes and the dislocation types calculated from some small earthquakes before the 12 May 2008 Wenchuan earthquake are in accordance with that of the main shock. The average stress field of micro-rupture along the Longmenshan fault zone before the great earthquake is also consistent with that calculated from main shock. Zipingpu dam is located in the east side 20 km from the initial rupture area of the 12 May 2008 Wenchuan earthquake. The activity increment of small earthquakes in the Zipingpu dam is in the period of water discharging. The source parameter results of the small earthquakes which occurred near the initial rupture area of the 12 May 2008 Wenchuan earthquake indicate that the focal depths are 5 to 14 km and the source parameters are identical with that of earthquake.     

Inversion of long-period body-wave data for the source process of the Gonghe, Qinghai, China earthquake

Long period body waves data recorded by the China Digital Seismograph Network (CDSN) are inverted for the seismic moment tensors of the April 26, 1990, Gonghe, QinghaiM _S=6.9 earthquake and itsM _S=5.0 after-shock occurred on May 7, 1990. In the inversion, the generalized reflection-transmission coefficient matrix method is used to generate Green’s function. From the inversion it is obtained that the rupture process of theM _S=5.0 aftershock is relatively simple, and that of the main shock is rather complex. There are at least two events during main shock rupture process with an interval about 35 seconds. The focal mechanisms of two events are roughly the same as that of the aftershock, all of them were mainly reverse dip-slipping faulting with minor left-lateral strike-slip motion. These results indicate that the Gonghe earthquake was the result of the farther extension of one NWW-SEE striking buried fault on the southern margin of Gonghe basin from shallower depth to deeper depth and from NW to SE under the action of a nearly horizontal NE direction compressive stress. Contribution No. 95A0111, Institute of Geophysics, SSB, China.