NUMERICAL SIMULATION OF DEFORMATION MOVEMENT AND STRESS ACCUMULATION IN LONGMENSHAN AND ITS ADJACENT FAULTS BEFORE WENCHUAN EARTHQUAKE

In order to reveal the deformation and cumulative stress state in Longmenshan and its adjacent faults before Wenchuan earthquake,a 3D viscoelastic finite element model,which includes Longmenshan,Longriba,Minjiang and Huya faults is built in this paper.Using the GPS measurement results of 1999-2004 as the boundary constraints,the deformation and movement of Longmenshan fault zone and its adjacent zones before Wenchuan earthquake are simulated.The conclusions are drawn in this paper as follows:First,velocity component parallel to Longmenshan Fault is mainly absorbed by Longriba Fault and velocity component perpendicular to the Longmenshan Fault is mainly absorbed by itself.Because of the barrier effect of Minjiang and Huya faults on the north section of Longmenshan Fault,the compression rate in the northern part of Longmenshan Fault is lower than that in the southern part.Second,extending from SW to NE direction along Longmenshan Fault,the angle between the main compressive stress and the direction of the fault changes gradually from the nearly vertical to 45 degrees. Compressive stress and shear stress accumulation rate is high in southwest segment of Longmenshan Fault and compressive stress is greater;the stress accumulation rate is low and the compressive stress is close to shear stress in the northeast segment of the fault.This is coincident with the fact that small and medium-sized earthquakes occurred frequently and seismic activity is strong in the southwest of the fault,and that there are only occasional small earthquakes and the seismic activity is weak in the northeast of the fault.It is also coincident with the rupture type of thrust and right-lateral strike-slip of the Wenchuan earthquake and thrust of the Lushan earthquake.Third,assuming that the same type and magnitude of earthquake requires the same amount of stress accumulation,the rupture of Minjiang Fault,the southern segment of Longmenshan Fault and the Huya Fault are mainly of thrust movement and the earthquake recurrence period of the three faults increases gradually.In the northern segment of Longriba Fault and Longmenshan Fault,earthquake rupture is of thrusting and right-lateral strike-slip. The earthquake recurrence period of former is shorter than the latter.In the southern segment of Longriba Fault,earthquake rupture is purely of right-lateral strike-slip,it is possible that the earthquake recurrence period on the fault is the shortest in the study region.     

郯庐断裂带鲁苏皖段构造应力场及分段特征研究

利用Snoke方法求解和收集得到的77次中小地震的震源机制解资料, 采用Gephart应力张量反演方法, 获得了郯庐断裂带鲁苏皖段构造应力场, 最大主压应力方位角为80°, 最小主压应力方位角为172°, 最大、 中等和最小主压应力倾角分别为15°、 65°和19°, 反映了研究区处于近EW向水平作用和近NS向的水平拉张作用环境下。 根据地震活动、 地质构造及震源机制解差异, 我们将郯庐断裂带鲁苏皖段分5个区段开展研究, 结果显示: 5个分区应力场存在局部差异, 最大主压应力方位角处于63°～88°之间, 从北往南总体方向成顺时针偏转的趋势。 跨郯庐断裂带两侧的应力场研究结果显示, 从西到东最大主压应力方向有一个逆时针偏转的趋势, 西侧最大主压应力方向更接近EW向, 东侧更接近NE向, 郯庐断裂带内处于两侧的过渡地段。     

STUDY ON THE SEISMOGENIC FAULT CHARACTERSTICS OF 2016 MW5.9 MENYUAN EARTHQUAKE BASED ON Sentinel -1A DATA

In this paper, we processed and analyzed the Sentinel-1A data by "two-pass" method and acquired the surface deformation fields of Menyuan earthquake. The results show the deformation occurred mainly in the south wall of fault, where uplift deformation is dominant. The uplift deformation is significantly larger than the subsidence and the maximum uplift of ascending and descending in the LOS is 6cm, 8cm respectively. Meanwhile, based on the Okada model, we use the ascending and descending passes data as constraints to invert jointly the fault distribution and source parameters through constructing fault model of different dip directions. The optimum fault parameters are:The dip is 43°, the strike is 128°with the mean rake of 85°. The maximum slip is about 0.27m. The inverted seismic moment M₀ is 1.13×10¹⁸N·m, and the moment magnitude M_W is 5.9. The SW-dipping Minyue-Damaying Fault is possibly the seismogenic fault, based on the comprehensive analysis of the focal mechanisms, aftershocks relocation results and the regional tectonic background. The focus property is dominated by thrust movement with a small amount of dextral strike-slip component. The earthquake is the result of local stress adjustment nearby the Lenglongling Fault under the background of northeastward push and growth of Tibet Plateau.     

RESEARCH ON THE CHARACTERISTICS OF QUATERNARY ACTIVITIES OF SU-XI-CHANG FAULT

Running across the urban areas of Changzhou, Wuxi and Suzhou, the NW-trending Su-Xi-Chang Fault is an important buried fault in Yangtze River Delta. In the respect of structural geomorphology, hilly landform is developed along the southwest side of the Su-Xi-Chang Fault, and a series of lakes and relatively low-lying depressions are developed on its northeast side, which is an important landform and neotectonic boundary line. The fault controlled the Jurassic and Cretaceous stratigraphic sedimentary and Cenozoic volcanic activities, and also has obvious control effects on the modern geomorphology and Quaternary stratigraphic distribution. Su-Xi-Chang Fault is one of the target faults of the project "Urban active fault exploration and seismic risk assessment in Changzhou City" and "Urban active fault exploration and seismic risk assessment in Suzhou City". Hidden in the ground with thick cover layer, few researches have been done on this fault in the past. The study on the activity characteristics and the latest activity era of the Su-Xi-Chang Fault is of great significance for the prevention and reduction of earthquake disaster losses caused by the destructive earthquakes to the cities of Changzhou, Wuxi and Suzhou. Based on shallow seismic exploration and drilling joint profiling method, Quaternary activities and distribution characteristics of the Su-Xi-Chang Fault are analyzed systematically. Shallow seismic exploration results show that the south branch of the Su-Xi-Chang Fault in Suzhou area is dominated by normal faulting, dipping to the north-east, with a dip angle of about 60° and a displacement of 3~5m on the bedrock surface. The north branch of the Su-Xi-Chang Fault in Changzhou area is dominated by normal faulting, dipping to the south, with a dip angle of about 55°~70° and a displacement of 4~12m on the bedrock surface. All breakpoints of Su-Xi-Chang Fault on the seismic exploration profiles show that only the bedrock surface was dislocated, not the interior strata of the Quaternary. On the drilling joint profile in the Dongqiao site of Suzhou, the latest activity of the south branch of Su-Xi-Chang Fault is manifested as reverse faulting, with maximum displacement of 2.9m in the upper part of Lower Pleistocene, and the Middle Pleistocene has not been dislocated by the fault. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 3.7m in the Neogene stratum. On the drilling joint profile in the Chaoyang Road site of Changzhou, the latest activity of the north branch of Su-Xi-Chang Fault is manifested as reverse faulting too, with maximum displacement of 2.8m in the bottom layer of the Middle Pleistocene. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 10.2m in the bedrock surface. Combining the above results, we conclude that the latest activity era of Su-Xi-Chang Fault is early Middle Pleistocene. The Su-Xi-Chang Fault was dominated by the sinistral normal faulting in the pre-Quaternary period, and turned into sinistral reverse faulting after the early Pleistocene, with displacement of about 3m in the Quaternary strata. The maximum magnitude of potential earthquake on the Su-Xi-Chang Fault is estimated to be 6.0.     

2014年秭归M_S4.5和M_S4.9地震震源与发震构造特征

2014年3月27日和30日湖北秭归县发生了三峡水库蓄水以来该地区最大的2次地震,文中通过多种方法分析了2次地震的震源与发震构造特征。采用Kiwi方法反演2次地震的矩张量解,该方法中使用了湖北和重庆测震台网14个宽频带波形记录和6层地壳速度结构模型,反演结果显示,2次地震观测谱和波形与理论谱和波形拟合得比较好,非拟合误差数0.57,表明反演结果是可靠的。2次地震均为走滑兼少量逆冲错动,但前一地震为左旋走滑,后一地震为右旋走滑,矩张量解中DC成分偏少而ISO成分多可能是库水对地下介质物性影响的反映。同时也使用三峡台网15个子台记录的波形资料,采用双差定位法重新精定位了从3月27日至4月27日时段内超过500次地震序列事件,结果显示余震序列分布方向为NNW向和NE向,但主要集中在NE向,并分别沿NNW和NE向作了深度剖面,剖面显示震源深度为4.5~10.0km,余震在深部呈现2个较明显的断面,与震源机制解NE向节面产状一致。野外现场宏观烈度调查指出,Ⅴ度极震区等震线为一椭圆,长轴NWW向,短轴NE向,结合野外现场考察结果和震源区地质构造背景,综合推断仙女山断裂北端的NE向破裂面为2次地震的发震断面,余震序列的NE和NNW向分布、剖面上发震层的形态和深度特征表明,这次地震活动受到了仙女山断裂和九畹溪断裂活动的控制与影响。     

RELOCATION OF MAIN SHOCK AND AFTERSHOCKS OF THE 2014 YINGJIANG MS5.6 AND MS6.1 EARTHQUAKES IN YUNNAN

Yingjiang area is located in the China-Burma border,the Sudian-Xima arc tectonic belt,which lies in the collision zone between the Indian and Eurasian plates.The Yingjiang earthquake occurring on May 30th,2014 is the only event above M_S6.0 in this region since seismicity can be recorded.In this study,we relocated the Yingjiang M_S5.6 and M_S6.1 earthquake sequences by using the double-difference method.The results show that two main shocks are located in the east of the Kachang-Dazhuzhai Fault,the northern segment of the Sudian-Xima Fault.Compared with the Yingjiang M_S5.6 earthquake,the Yingjiang M_S6.1 earthquake is nearer to the Kachang-Dazhuzhai Fault.The aftershocks of the two earthquakes are distributed along the strike direction of the Kachang-Dazhuzhai Fault (NNE).The rupture zone of the main shock of Yingjiang M_S6.1 earthquake extends northward approximately 5km.The aftershocks of two earthquakes are mainly located in the eastern side of the Kachang-Dazhuzhai Fault with a significant asymmetry along the fault,which differ from the characteristics of the aftershock distribution of the strike-slip earthquake.It may indicate that the Yingjiang earthquakes are conjugate rupture earthquakes.The non-double-couple components are relatively high in the moment tensor.We speculate that the Yingjiang earthquakes are related to the fractured zone caused by the long-term seismic activity and heat effect in the deep between Kachang-Dazhuzhai Fault and its neighboring secondary faults.Aftershock distribution of the Yingjiang M_S6.1 earthquake on the southern area crosses a secondary fault on the right of the Kachang-Dazhuzhai Fault,suggesting that the coseismic rupture of the secondary fault may be triggered by the dynamic stress of the main shock.     

2017年九寨沟MS7.0地震对周围地区的静态应力影响

基于九寨沟M_S7.0地震的破裂模型及均匀弹性半空间模型,本文计算了该地震在周围主要活动断层上产生的库仑应力变化、在周围地区产生的应力场和位移场和同震库仑应力变化对余震的触发.结果表明：（1）九寨沟地震造成虎牙断裂中段库仑破裂应力有较大增加,已经超过0.01 MPa的阈值,虎牙断裂北段、塔藏断裂中段和岷江断裂北段北部的库仑破裂应力有较大降低,因此尤其要注意虎牙断裂中段的危险性.（2）水平面应力场在该地震震中东西两侧增加（拉张）,张应力起主要作用.在震中南北两侧降低（压缩）,压应力起主要作用.从水平主压和主张应力方向来看,均呈现出条形磁铁的磁场形态.从剖面上的应力场来看,在上盘的面膨胀区域内,大部分点的主张应力方向与地表是垂直的,在其他区域内,主张应力和主压应力均以震中为中心,向外呈辐射状.（3）从地表水平位移场来看,震中东西两侧物质朝震中位置汇聚,南北两侧物质向外流出,在震中处的最大水平位移量达43 mm.从地表垂直位移场来看,震中南北两侧出现明显的隆升,隆升最大值达56.8 mm.震中东西两侧出现明显的沉降,沉降最大值达74.5 mm.从剖面的位移场来看,九寨沟地震为左旋走滑地震,且有一定的正断成分.由分析可以推测该断层破裂在大致22~26 km的深度上就截止了.并推测下盘物质运动的动力来自震源北东东方向（四川块体）深度在6~30 km的下盘下层物质,上盘物质运动的动力来自震源北西西方向（巴颜喀拉块体）深度在0~6 km的上盘上层物质.（4）通过计算不同深度上主震对余震的触发作用可知,主震后的最大余震受到了主震的触发作用,多数其他余震也受到主震的触发作用.主震的发生促使了库仑应力增加地区余震的发生,抑制了一部分库仑应力减少地区余震的发生.     

新疆精河M_W6.3地震产生的静态应力变化研究

利用精河M_W6.3地震有限断层破裂模型,计算了精河地震产生的位移场、应力场、周围主要断层上的静态库仑应力变化以及主震对余震的触发作用。结果表明:(1)精河地震产生的地表隆升最大值约为6.6cm,沉降最大值约为1.8cm;水平位移方向呈现震中南北侧向震中汇聚、震中东西侧向外"流出"的特点。(2)精河地震产生的水平面应力场展布南北侧物质主要受到指向震中的拉张力作用,东西两侧物质主要受到因震中过剩物质东西向排出而导致的东西向挤压力作用。(3)震中西侧距震中约20km的库松木契克山前断裂中段和震中东北部距震中约50km的四棵树-古尔图南断裂西段的库仑应力加载均大于0.01MPa,即2处为地震危险区。(4)在震源深度为8~12km的余震事件中,约有85.5%处于库仑应力加载区,即受到主震的的触发作用;在深度为4~8km的余震事件中,约有87%受到主震的应力触发作用。     

Basement structural architecture and hydrocarbon conduit potential of polygonal faults in the Cooper‐Eromanga Basin,Australia

A thorough and complete understanding of the structural geology and evolution of the Cooper‐Eromanga Basin has been hampered by low‐resolution seismic data that becomes particularly difficult to interpret below the thick Permian coal measures. As a result, researchers are tentative to interpret the basement fault architecture within the basin, which is largely undefined. To provide a better understanding of the basement fault geometry, all available two‐dimensional seismic lines together with 12 three‐dimensional seismic surveys were structurally interpreted with assistance from seismic attribute analysis. The Upper Cretaceous Cadna‐owie Formation and top Permian reflectors were analysed using a common seismic attribute technique (incoherency) that was used to infer the presence of faults that may have otherwise been overlooked. Detailed basement fault maps for each seismic survey were constructed and used in conjunction with two‐dimensional seismic data interpretation to produce a regional basement fault map. Large north‐northeast–south‐southwest‐striking sinistral strike–slip faults were identified within the Patchawarra Trough appearing to splay from the main northeast–southwest‐striking ridge. These sinistral north‐northeast–south‐southwest‐striking faults, together with field‐scale southeast–northwest‐striking dextral strike–slip faults, are optimally oriented to have potentially developed as a conjugated fault set under a south‐southeast–north‐northwest‐oriented strike–slip stress regime. Geomechanical modelling for a regionally extensive system of Cretaceous polygonal faults was performed to calculate the Leakage Factor and Dilation Tendency of individual faults. Faults that extend into Lower Cretaceous oil‐rich reservoirs with strikes of between 060°N and 140°N and a high to near‐vertical dip angle were identified to most likely be acting as conduits for the tertiary migration of hydrocarbons from known Lower Cretaceous hydrocarbon reservoirs into shallow Cretaceous sediments. This research provides valuable information on the regional basement fault architecture and a more detailed exploration target for the Cooper‐Eromanga Basin, which were previously not available in literature.     

断层厚度的地震效应和非对称地震矩张量

本文导出了具有厚度和滑动弱化区域的断层的非对称地震矩张量表示式,指出要求地震矩张量具有对称性不是一个绝对必要的限制.在非对称地震矩张量中,位错项对应于对称地震矩张量,拉力项对应于非对称地震矩张量.由于拉力项等效于单力偶,所以在非对称地震矩张量解的两个节面上,沿滑动矢量方向的力偶强度不再相同,与较大力偶相联系的节面为断层面,与较小力偶相联系的节面为辅助面.这一性质可用以从两个正交的节面中判断哪一个节面是断层面.如果忽略拉力项,会高估与位错对应的标量地震矩.只有满足相应的约束条件的非对称地震矩张量才能表示具有厚度和滑动弱化区域的断层模型,并从中分离出与位错和拉力对应的地震矩张量.     

2008年5月12日四川汶川8.0级地震与部分余震的震源机制解

采用区域和远台Pn或Pg初至波初动符号, 利用下半球等面积投影, 求解了2008年5月12日四川汶川8.0级地震和截止到2008年12月10日发生的部分4级以上余震的震源机制解。 汶川8.0级地震的震源机制为: 节面Ⅰ的走向为5°, 倾角为48°, 滑动角为39°; 节面Ⅱ的走向为247°, 倾角为62°, 滑动角为131°。 P轴方位角为309°, 仰角为8°, T轴方位角为208°, 仰角为54 °, B轴方位角为44°, 仰角为35°。 结合地质构造和余震空间分布, 可以确定节面Ⅱ为发震断层面。 根据震源机制解, 引发本次地震的断层活动主要表现为逆冲, 主破裂面为S67°W与该地震所在断层的走向基本一致(断裂总体走向N45°E)^[1]; 主压应力轴P轴为N51 °W, 主压应力轴P轴方位与该区域构造应力场方向基本一致。 根据余震震源机制解结果, 龙门山断裂带南段发生的余震与北段发生的余震的震源机制都具有优势分布, 且两者差异明显。 早期发生在南段的余震的破裂是以逆倾滑动为主, 兼有走向滑动; 而随着时间的推移, 余震向北段迁移, 在龙门山构造的北段地震震源的破裂方式以走向滑动为主, 兼有一定的逆倾滑动; 龙门构造带南段震源应力场受主震应力场的控制, 而龙门构造带北段震源应力场不仅受区域应力场的影响, 还受主震应力场的影响。     

汶川地震序列早期特征及成因探讨

地震序列的特征和震型判定工作有助于抗震救灾工作的开展,对其发生成因的研究是解决地震预报难题必须面对的科学问题。汶川8．0级地震序列的初步研究表明：①余震沿龙门山断裂带分布于宽100km,长约330km的带状区域内,并侧向于主震震中的北侧;②序列发展初期有2个快速衰减过程;③序列类型为主震一余震型,最大强余震6．4级;④序列的空间演化过程,强余震震源机制结果和地震精确定位结果分析表明,序列具有分段特征;⑤8．0级地震的发震构造是龙门山断裂带,发震构造在剖面上呈现出“犁形”或“铲形”。地球物理勘探和壳、幔结构反演结果表明,自青藏高原穿越龙门山到四川盆地存在地幔阶梯,上地幔阶梯的阻挡作用使得物质东移速率减慢,并蕴积了汶川8．0级地震所需能量。地震的产生正是东西向应力平衡被打破的结果,余震沿龙门山断裂的分布是高原地壳在印度板块的推挤作用下向北北东方向的运动得以继续的表现。整个龙门山断裂带都参与了活动,龙门山断裂带北端作为断裂带的止裂端与南段同期活动。     

USING DEFORMED FLUVIALTERRACES OF THE QINGYIJIANG RIVER TO STUDY THE TECTONIC ACTIVITY OF THE SOUTHERN SEGMENT OF LONGMENSHAN FAULT ZONE

On 20 April 2013, a destructive earthquake, the Lushan M_S7.0 earthquake, occurred in the southern segment of the Longmenshan Fault zone, the eastern margin of the Tibetan plateau in Sichuan, China. This earthquake did not produce surface rupture zone, and its seismogenic structure is not clear. Due to the lack of Quaternary sediment in the southern segment of the Longmenshan fault zone and the fact that fault outcrops are not obvious, there is a shortage of data concerning the tectonic activity of this region. This paper takes the upper reaches of the Qingyijiang River as the research target, which runs through the Yanjing-Wulong Fault, Dachuan-Shuangshi Fault and Lushan Basin, with an attempt to improve the understanding of the tectonic activity of the southern segment of the Longmenshan fault zone and explore the seismogenic structure of Lushan earthquake. In the paper, the important morphological features and tectonic evolution of this area were reviewed. Then, field sites were selected to provide profiles of different parts of the Qingyijiang River terraces, and the longitudinal profile of the terraces of the Qingyijiang River in the south segment of the Longmenshan fault zone was reconstructed based on geological interpretation of high-resolution remote sensing images, continuous differential GPS surveying along the terrace surfaces, geomorphic field evidence, and correlation of the fluvial terraces. The deformed longitudinal profile reveals that the most active tectonics during the late Quaternary in the south segment of the Longmenshan Fault zone are the Yanjing-Wulong Fault and the Longmenshan range front anticline. The vertical thrust rate of the Yanjing-Wulong Fault is nearly 0.6~1.2mm/a in the late Quaternary. The tectonic activity of the Longmenshan range front anticline may be higher than the Yanjing-Wulong Fault. Combined with the relocations of aftershocks and other geophysical data about the Lushan earthquake, we found that the seismogenic structure of the Lushan earthquake is the range front blind thrust and the back thrust fault, and the pop-up structure between the two faults controls the surface deformation of the range front anticline.     

MECHANISM OF THE 2015 PISHAN,XINJIANG, MS6.5 MAINSHOCK AND RELOCATION OF ITS AFTERSHOCK SEQUENCES

Using the digital broadband seismic data recorded by Xinjiang network stations, we obtained focal mechanism of the July 3 Pishan, Xinjiang, M_S6.5 earthquake with generalized Cut and Paste(gCAP)inversion method. The strike, dip and rake of first nodal plane are 97°, 27°, 51°, and the second nodal plane are 318°, 70°, 107°. The centroid depth and moment magnitude are calculated to be 12km and 6.4. Combining with the distribution of aftershocks, we conclude that the first nodal plane is the seismogenic fault, and the main shock presents a thrust earthquake at low angle. We relocated 1014 earthquakes using the double-difference algorithm, and finally obtained 937 relocated events. Our results show that the earthquake sequences clearly demonstrate a unilateral extension about 50km nearly in NWW direction, and are mainly located above 25km depth, especially the small earthquakes are predominately located at the shallow parts. Furthermore, the focal depth profile shows a southwestward dipping fault plane at the main shock position, suggesting listric thrust faulting, which is consistent with the dip of the mainshock rupture plane. The spatial distribution of aftershocks represents that the Tarim block was thrust under the West Kunlun orogenic belt. In addition, the dip angle of the fault plane gradually increases along the NWW direction, possibly suggesting a gradual increase of strike-slip component during the NWW rupturing process. From above, we conclude that the Pishan M_S6.5 earthquake is the result of Tibet plateau pushing onto the Tarim block from south to north, which further confirms that the continuous collision of India plate and Eurasia plate has strong influence on the seismic activity in and around the Tibet plateau.     

THE ACTIVITY CHARACTERISTICS OF ZHENGZHOU-KAIFENG FAULT DURING KAINOZOIC

As one of the rhombic blocks in North China, Kaifeng depression is on the south of the northern Huabei depression and in the north of the southern Huabei depression, bounded by Xinxiang-Shangqiu Fault and Zhengzhou-Kaifeng Fault, respectively. So far, the activity of Zhengzhou-Kaifeng Fault during Kainozoic era and the relationship between Zhengzhou-Kaifeng Fault and Xinxiang-Shangqiu Fault is still unknown. We interpreted several deep seismic profiles across Taikang uplift and Kaifeng depression on the basis of the strata sequence exposed by the 8 drill holes in the related area. The outcomes indicate that the Zhengzhou-Kaifeng Fault strikes EW on the whole, presenting undulating feature in plain, with a length about 154km. The profiles show the dip angle of the fault is steeper in the shallow than that in the deep, with an obvious "L-shaped" turning point. In Paleogene, the fault was a normal fault. In its hanging wall, the Kaifeng depression, there deposited hundreds of meters of Eogene. After middle Himalayan movement, Zhengzhou-Kaifeng Fault converted to a strike-slip fault, the dip angle became steeper, but the activity became weaker. The Zhengzhou-Kaifeng Fault ended its activity before Quaternary. As a response to the compression in the footwall caused by the sustained sinistral shearing, there developed a series of NW-trending, en echelon wide and gentle folds. Then, the activity in Kaifeng depression shifted to its north boundary.     

Fault geometrical model of Dujiangyan section in Longmenshan fault zone

The focal mechanism solution on the seismic fault plane can reflect the geometric and kinematic characteristics of faults, and it is an important way to further study the fine structure of fault plane. From the focal mechanism solution of the earthquakes around the Dujiangyan fault in Longmenshan fault zone, we derived the average dip angle of Dujiangyan fault is 45.1° based on the seismic moment tensor theory. In order to refine the fault geometry structure, this paper decomposed it into multiple sub-fault planes along the length and width of the fault plane and forms a number of models A13, B13, A23 a, A23 b, A23 c, B23 a,B23 b and B23 c, then calculated the sub-fault's dip of each model. In order to clarify exactly which one of the fault models is closest to the real fault model, the fault slip was carried out for each model in turn, then compared the surface displacement of each model with GPS observations. The results show that B23 c model with high dip in shallow and small dip in deep is the best model, the lengths of each subfault of Dujiangyan fault from south to north are 33 km, 21 km and 46 km, respectively. When the depth of the fault bottom is about 11 km, the dip angles are 70.56°, 67.41° and 45.55°.When the depth of the fault bottom is about 30 km, The fault dip angles are 44.55°, 29.18° and 44.25°.     

Current Activity Characteristics of the Fault Zone Along the Northern Margin of West Qinling Range Revealed by GPS Measurementl

The fault zone along the northern margin of West Qinling Range is a major active fault zonein the key seismic monitoring area in the southeastern part of Gansu Province.In order tostudy the current activity characteristics of this fault,GPS monitoring network has beenarranged along both sides of the fault and 3 measurements have been made from 1996 to1998.The result indicates that obvious differential movement exists along the north and southsides of the fault and the eastward movement on the south side is 3.8mm/a larger than thaton the north side.In the GPS network,the shortened side is generally in the trend of EW andthe extended side is basically NW to SE.The principal compressional stress trend in this areais about EW and the sinistral motion is obvious in the eastern part of the fault(nearWushan).The measured results also indicate that the displacement rate has decreased by50% and the compressional strain has increased by 100% as compared the data of 1997～1998 with those of 1996～1997,which shows t     

Relocation of the M 8.0 Wenchuan earthquake and its aftershock sequence

We relocated M8.0 Wenchuan earthquake and 2706 aftershocks with M⩾2.0 using double-difference algorithm and obtained relocations of 2553 events. To reduce the influence of lateral variation in crustal and upper mantle velocity structure, we used different velocity models for the east and west side of Longmenshan fault zone. In the relocation process, we added seismic data from portable seismic stations close to the shocks to constrain focal depths. The precisions in E-W, N-S, and U-D directions after relocation are 0.6, 0.7, and 2.5 km respectively. The relocation results show that the aftershock epi-centers of Wenchuan earthquake were distributed in NE-SW direction, with a total length of about 330 km. The aftershocks were concentrated on the west side of the central fault of Longmenshan fault zone, excluding those on the north of Qingchuan, which obviously deviated from the surface fault and passed through Pingwu-Qingchuan fault in the north. The dominant focal depths of the aftershocks are between 5 and 20 km, the average depth is 13.3 km, and the depth of the relocated main shock is 16.0 km. The depth profile reveals that focal depth distribution in some of the areas is characterized by high-angle westward dipping. The rupture mode of the main shock features reverse faulting in the south, with a large strike-slip component in the north. Supported by the Basic Research Project of Institute of Geophysics, China Earthquake Administration (Grant No. DQJB08Z03)     

RESEARCH OF FOCAL MECHANISM AND DEPTH OF TWOMS4.5 EARTHQUAKES IN YONGNING

TwoM_S4.5 earthquakes happened in Yongning, a county of Yinchuan in Ningxia on June 22, 2010 and November 20, 2012, which were both strongly felt in Yinchuan and its vicinities. In order to understand the seismogenic structure better, we collected the regional earthquake waveform data of Ningxia and nearby seismic networks. Locating main shocks and aftershocks distribution by Hyp2000 and inversing the focal mechanism and depth by TDMT, we got results as follows: for the June 22 earthquake, nodal plane Ⅰ: strike 208, dip 89, and rake -164; nodal plane Ⅱ: strike 117, dip 74, and rake -2. For the November 20 earthquake: nodal plane Ⅰ: strike 284, dip 79, and rake 12, nodal plane II strike 192, dip 79, and rake 169. By means of reference to Snoke method, it is known that the main fractures of the two earthquakes are both strike slip faults with NNE-trending and NNW-dipping, while the former has a small amount of tension component and the latter has a small amount of thrust component. And the moment magnitudes of them areM_W4.5 andM_W4.3. According to Hyp2000 location, TDMT moment tensor fitting error and sPn depth phases, we consider that the focal depths of the two earthquakes are 22km and 8km, both are shallow-focus ones. Though the epicenters of the two earthquakes are 13km apart from each other, the former one is deeper, the reason is that the November 20 earthquake was controlled by the major fault of Yinchuan Fault, while the June 22 earthquake was controlled by south branch of Yinchuan Fault.     

VELOCITY STRUCTURE TOMOGRAPHY OF REGIONS DOWNSTREAM THE JINSHA RIVER BASED ON DENSE OBSERVATION

In this paper, the double difference seismic tomography method is applied to the phase arrival times of 7 465 seismic events to determine the hypocenter parameters of events as well as detailed 3D velocity structure at the northern segment of Xiaojiang Fault and its surrounding area. The data was recorded by 42 stations of the Jinshajiang River network from August 2013 to November 2016. At 2~6km, V_P and V_S present low velocity anomalies along the northern segment of Xiaojiang Fault, and the V_S anomaly is especially remarkable. On both sides of the Xiaojiang Fault, there also exist obvious P and S wave low velocity areas. These low velocity areas correspond to the terrain, lithology distribution and the watershed of Jinsha River at shallower layer in the study area. Starting from 6km, a NE-directed high V_P band along Zhaotong-Ludian and Huize-Yiliang Fault is formed on the eastern side of the northern segment of Xiaojiang Fault. V_S also shows the high value in the area bounded by Lianfeng Fault, Baogunao-Xiaohe Fault and Huize-Yiliang Fault. Above 10km depth, to the west side of the Xiaojiang Fault including the Ninghui Fault, V_P shows a significant low-velocity anomaly, while to the east side it presents high velocity feature. The Xiaojiang fault zone shows a significant low V_P from north to south in the study region, and the low velocity anomaly in the northern segment is relatively significant, especially the low velocity anomaly area reaches 15km deep around Qiaojia area. Beneath the Baihetan Dam, a significant low V_P area reaching to 5km deep is found. The earthquakes around the dam formed a strip from shallow to deep on the low-velocity area side. Whereas, a stable high-velocity area is found under the Wudongde Dam. The events relocation result shows that:all the focal depths in the study area are shallower than 20km, and the predominant focal depth is within 15km. Different from the NE-trending of the major faults in the study area, the relocated seismic events are obviously distributed nearly east-west along Matang Fault and Daduo Fault and the region around Huize. The focal depths of M_S6.5 Ludian earthquake sequences are shallower than 15km, and mostly less than 10km. The aftershocks within 2a after the Ludian M6.5 earthquake form two predominant bands of about 40km and 20km along near EW and SN direction, respectively.