1969年渤海7．4级地震区地质构造和发震构造的初步研究

根据石油地质勘探资料和地震学等研究的成果,对1969年渤海7.4级地震的构造条件作了具体而较深入的分析,填补了华北渤海大震区地震构造研究的空白.震区位于渤海湾新生代裂陷盆地的东部,地处北北东向营潍断裂带与北西向北京-蓬莱断裂带交汇的地区.早第三纪断陷阶段,该区于地壳上部主要发育北北东、北西和东西向3组断裂,呈铲状和平面状形态,正断性质,多属断陷主断裂.晚第三纪以来的拗陷阶段,先存断裂有不同程度的活动;同时还新发育一条北东向黄河口-庙西北断裂带.7.4级地震的震源断层走向为北东45°,倾向南东,近于直立,呈右旋走滑性质,埋藏于15～34km的深度范围.大震的发震断裂不是营潍断裂带,而是黄河口-庙西北新生断裂带.     

渤海盆地现代构造应力场与强震活动

渤海位于北华北新生代裂陷盆地的东部，是一个晚第四纪形成的内陆海盆. 渤海盆地活动断裂发育，地震活动强烈，交会于渤海中部的NE向营口——潍坊断裂带北段、庙西北——黄河口——临邑断裂带及NW向北京——蓬莱断裂带是主要的活动构造带，将海区分成4个次级新构造区，成为现代应力场作用的构造基础. 综合研究38个震源机制解和75个井区应力场等资料，以及构造应力场二维数值模拟计算结果表明，渤海及其邻区现代构造应力场的压应力方向为NE60～90，张应力为SN——NW30；以水平和近水平应力作用为主；不同构造区主应力方向存在一定的差异. 现今渤海地区地壳发育以NNE——NE和NW——WNW走向的共轭剪切破裂为特征，是控制地震活动的主要构造.      

营口-潍坊断裂带新构造和新构造活动的再认识

营潍断裂带是郯庐断裂带通过渤海的部分,亦为渤海湾盆地东部构造的重要组成部分,近年来一些研究者从不同角度对断裂带的新构造和新构造活动等进行了不同程度的研究。文中基于以往的工作并结合其他研究者的成果,对该断裂带的新构造和新构造活动及有关问题再次作了分析。渤海地区新构造运动开始于中新世晚期(12~10MaBP),它源自区域地壳水平运动,新构造应力场以NEE-SWW至近EW向水平挤压为特征。营潍断裂带的新构造,主要表现为先存古近纪断裂复活和新构造应力场初始应力作用在其上覆新近系--第四系中形成的构造变形,它以断裂极其发育为特征。NE向斜切营潍断裂带中段的庙西北-黄河口新生断裂带的产生,不仅使营潍断裂带的新构造和新构造活动具分段性,而且使该断裂带的新构造活动显著减弱。渤海东部地震基本沿庙西北-黄河口断裂带分布,营潍断裂带辽东湾段和莱州湾段地震较少且震级小。为究其原因,最后还作了初步的力学分析。     

渤海东南部NE向黄河口-庙西北新生断裂带的存在

根据中国海洋石油研究中心勘探研究院新取得的渤海明化镇组(N21—N2)和第四系底部构造的资料,在从黄河口到长兴岛的NE向地带发育近600条断裂,其中NE—NEE走向的有近500条,占断裂总数的83%,一般长5～20km,最长40～50km。这组断裂有少数为NE—NEE向古近纪断裂新活动的产物,其余是新形成的,它们总体组成宽约60km的NE向断裂带,具右旋走滑性质。该断裂带不受古近纪断裂构造控制,属新近纪以来发育的新生断裂带。这一现象证实了以前推断的黄河口-庙西北新生断裂带的存在     

张家口-蓬莱断裂带地震构造特征的初步探讨

北西向张家口－蓬莱断裂带由近２０条北西至北西西向断裂组成,是一条对新生代区域地质构造发育起到重要控制作用的地壳构造带。断裂带新生代活动由中部向西北和东南部发展,总体表现左旋走滑性质。断裂带有山西断陷盆地带等几条北东向活动构造带与之交汇,形成北西和北东向两组断裂相互交切的构造组合,出现５个复杂的构造交接段。６级以上强震和大多数中小地震群集于这些地段,其中北西和北东向断裂都可能发生地震,显示共轭破裂错动特征,但北东向断裂发生的地震强度较大。张北－尚义６．２级地震发生于断裂带与山西断陷盆地带交接段的西缘,是断裂带向西北扩展的结果     

渤海地震活动特征

渤海是我国东部陆缘海湾地震活动性最高的地区。研究渤海的地震活动特征,对探讨我国沿海地震的成因、沿海现代地质构造活动性质以及海洋石油开发都有一定意义。本文研究了渤海的历史地震资料,除中国大地震目录已发表的地震外,本文新增补了2次6—61/2级地震和3次5级左右地震。讨论了1969年渤海大地震的震源深度,大地震目录给出的深度为35公里(位于地壳以下)。根据其他作者的最新测定的结果和作者等人重新测定的微震震源深度,认为1969年渤海大地震的震源深度为25公里较合适,渤海地震都位于地壳以内。渤海地震活动的时间分布与华北地震区完全一致,渤海地震是华北地震区的一部分。渤海内部的现代构造运动是以水平构造应力场作用下的走滑运动为主要特征。渤海地震活动与北北东向的郯庐断裂的右旋走滑活动以及与其共轭的北西西断裂的左旋走滑活动有关。     

渤海海域新生代盆地中的郯庐断裂带构造

郯庐断裂带从渤海海域新生代盆地东部边缘穿过,在盆地新生代盖层中主要表现为NNE向的右旋走滑断裂带,切割了控制古近纪盆地形成的NE-NNE向伸展断层.近年来的油气勘探成果表明,郯庐断裂带新生代构造活动对渤海海域的油气藏分布有直接或间接的影响.作为深断裂带的一部分,渤海海域新生代盆地中的郯庐断裂带的主要活动时期为渐新世以后,对渤海海域盆地渐新世以来的构造演化有明显的影响.然而郯庐深断裂带在晚中生代就已经存在,渤海海域古近纪裂陷盆地的形成利用了先存的郯庐断裂带中的构造要素.     

张家口-渤海地震构造带的地壳形变研究

华北北部地区的张家口-渤海断裂带是控制现代强震的一条地震构造带。新近纪以来,在区域NEE向主压应力的作用下,新发育了一系列的NE向构造活动带,与张家口-渤海断裂带组成1组共轭的剪切破裂系统,控制了近代强震的发生。文中主要探讨了这条断裂带的地壳形变特征。长趋势GPS地壳形变图像反映了这条活动断裂带相对完整的左旋走滑活动。分期的地壳形变图像揭示了在中强地震前,沿该断裂带出现一系列的NE向梯度异常带,分别指示了唐山-河间、三河-涞水以及延怀-山西地震构造活动带的活动,表明了沿张家口-渤海断裂带出现了中强地震的中期前兆。研究认为,强震前地壳形变揭示的是深部蕴震层的应变活动信息,而强震之后比较杂乱的图像特征体现了盖层的调整运动     

甘东南地区震情预警指标模型及方案研究

甘东南地区位于青藏块体东缘,地处南北地震带中段,其边界和内部发育多组活动断裂。在北东-北东东向区域应力场作用下,南北边界断裂发生左旋走滑运动,西部边界断裂发生右旋走滑活动,导致整个地块向南东方向挤出,在东南部遇到龙门山中央隆起带,造成东部边界地区地壳的缩短和山体的隆升,是青藏高原北部区域构造活动强烈的地区之一,也是中强震和强震发生的主要场所。     

营口潍坊断裂带新生代活动的特征

营潍断裂带以北西向北京 蓬莱断裂带与之交汇的部位为界分南北两段,北段由辫状交织的两条断裂组成;南段为并列的东西两支断裂,但被黄北、莱北和潍北等北东东向断裂横切成4节。断裂带北段早第三纪水平拉张和垂直差异活动强烈,控制了断陷盆地的发育,晚第三纪—第四纪右旋走滑活动显著。南段本身活动甚弱,但黄北等横向断裂早第三纪水平拉张和垂直差异活动强烈,相应形成了黄北等几个断陷盆地;晚第三纪—第四纪横向断裂仍有活动。断裂带活动具明显的分段性,南段是受横向断裂强烈分割、改造而被“废弃”的一段。断裂带新生代活动具由南部和北部统一向中部迁移的特点,北段还有向东侧迁移的趋势。断裂带地震活动微弱,渤海中部斜穿断裂带分布的北东向地震带,可能是黄河口聊城新生地震构造带向海区延伸的部分     

RE-COGNITION OF THE NEOTECTONICS AND ACTIVITIES OF THE YINGKOU-WEIFANG FAULT ZONE

The Yingkou-Weifang fault zone (YWFZ) is the part of the Tanlu fault zone across the Bohai Sea, and is also an important part of the tectonics of the eastern Bohai Bay Basin. Many studies have been carried out on the neo-tectonics and activities of the YWFZ in recent years. In this paper, the neo-tectonics and activities of the YWFZ, and other related issues were studied again, based on our previous work and results of other researchers. The neo-tectonic movement in the Bohai Sea area began in the late Miocene (12~10Ma BP), which originated from the local crust horizontal movement, the tectonic stress field is characterized by NEE-SWW and near E-W horizontal compression. The neo-tectonics of the YWFZ is represented mainly by Neogene-Quaternary deformation, due to rejuvenation of Paleogene faults. Many faults have developed. The neo-tectonics and activities of YWFZ have characteristics of segmentation and weakening, because of the development of the NE-trending Northwest Miao Island-the Yellow River Estuary fault zone, which crosses the YWFZ. Earthquakes in the east of Bohai Sea are distributed along the Northwest Miao Island-the Yellow River Estuary fault zone, only few and small earthquakes along the Liaodong Bay and the Laizhou Bay section of the YWFZ. We made a preliminary analysis of the mechanics for this phenomenon.     

Structural characteristics of the Tan-Lu fault zone in Cenozoic basins offshore the Bohai Sea

The Tan-Lu fault zone across the eastern margin of the Cenozoic basins offshore the Bohai Sea is a NNE-trending right-lateral strike-slip fault system developed in the Cenozoic basin cover. It cuts through NE-to NNE-striking major extensional faults that controlled the formation of Paleogene basins. Recent petroleum exploration indicates that Cenozoic structural activities of the Tan-Lu fault system have directly or indirectly affected oil and gas distribution offshore the Bohai Sea. As part of a deep fault zone the Tan-Lu fault zone has been activated since the Oligocene,and obviously affected the tectonic evolution of offshore Bohai basins since then. The formation of Paleogene rift basins offshore the Bohai Sea has utilized the pre-existing structural elements of the Tan-Lu fault zone that developed in the late Mesozoic.     

Recent tectonic stress field and major earthquakes of the Bohai Sea basin

Introduction The present Bohai Sea is a half-closed shallow one in the continent, located at the northeast to North China, with an area about 7.3104 km2. Geologically, it is situated in the northern North China basin and of a short development history. Previous studies (WANG, LI, 1983; Institute of Oceanology, Chinese Academy of Sciences, 1985; HUANG, et al, 1993) show that the Fu-jian-Lingnan uplift in the East China Sea continental shelf sank gradually into the oceanic bottom, mak…     

中国大陆现今地应力场黏弹性球壳数值模拟综合研究

中国大陆现今实测地应力场的状态与板块构造环境、活动断裂带分布、地形地貌以及地壳结构呈现一定相关性. 在中国大陆西缘,印度洋板块与欧亚板块陆发生陆碰撞,在中国大陆东缘,菲律宾海板块、太平洋板块俯冲到欧亚板块之下. 中国大陆内部被大型活动断裂带分割为多个块体,各个块体的地壳结构和厚度呈不均匀分布,地形地貌起伏具有很大的差异. 笔者以中国大陆块体模型为基础,把板块构造作用和重力势作为主要影响地应力状态的两个主要要素,在现今活动构造、GPS和实测地应力等成果的约束下,利用线性黏弹体球壳有限元模拟分析了中国大陆现今地应力场的分布特征和控制因素. 结果表明: (1)构造应力场总体上呈现出西部挤压,东部拉张的特征,印度板块与欧亚板块的持续碰撞形成了青藏高原及其周缘的挤压性质的构造应力场,而东部菲律宾板块与太平洋板块的俯冲形成了黄海、东海和环渤海区域的拉张性质的构造应力场,中间为拉张环境和挤压环境的过渡,最大主应力的方向受到板块构造环境和活动构造分布的控制;(2)重力的影响主要体现在地形梯度大和地壳厚度结构变化大的地壳浅部区域,在藏南、滇西北局部地区的地壳浅部由于受到重力势控制,呈现为张性应力场,在塔里木地区由于重力势引起的应力场与构造应力场同为挤压性质,因此该区的挤压强度得以增加;(3)中国大陆浅部地应力场的状态主要受到区域板块构造环境、块体边界活动构造带的展布和地形的控制,总体上以南北构造带为界,西部以较强的压性构造环境为主,东部为较弱的压性构造环境,藏南和滇西北局部地区存在有张性构造环境;构造应力对地应力的贡献比重随着深度增加而增加;(4)采用黏弹性模型的构造应力场模拟结果比完全弹性模型的模拟结果能够更好地与实测地应力场相吻合,利用完全弹性模型分析由地震等诱发的地应力瞬时变化是有效的;(5)青藏高原东南缘最大主应力方向发生了较大的偏转,其主要控制因素有:印度板块持续的碰撞、中下地壳对上地壳拖曳以及印度板块通过实皆断裂对欧亚板块的剪切拉伸作用. 中国大陆现今地应力场是整个地壳岩石黏弹特性长期演化和断裂活动的结果,是地应力场动态演化过程中在现今时间点上的状态,受到板块构造环境、大陆内部活动断裂分布、地形地貌和地壳结构等因素不同程度的控制,模拟结果为中国大陆地应力场提供了一个定量的参考模型.     

钻探揭示的黄河断裂北段活动性和滑动速率

黄河断裂是银川盆地内展布最长、切割最深的一条深大断裂,也是银川盆地的东边界。由于其北段呈隐伏状,因此,该段的活动性和滑动速率长期未知,影响了对盆地演化和地震危险性的认识。文中选择具有石油地震勘探基础的陶乐镇为研究场点,以人工浅层地震勘探结果为依据,在黄河断裂北段布设了一排钻孔联合剖面,并对标志层进行年代测试,获得了断裂的活动时代和滑动速率。结果表明,黄河断裂北段在晚更新世末期或全新世有过活动,在（28.16±0.12）ka BP 以来的累积位移为0.96m,晚第四纪以来的平均滑动速率为0.04mm/a,该值明显低于南段灵武断层（0.24mm/a）;尽管向下切割了莫霍面,黄河断裂晚第四纪活动强度和发震能力均要低于切割相对浅的贺兰山东麓断裂;黄河断裂可能在新生代之前已经强烈活动并深切莫霍面,新生代以来,银川盆地的构造活动迁移分解到以贺兰山东麓断裂为主的多条断裂之上,地壳双层伸展模型可解释银川盆地现今深浅部构造活动间的联系。     

黄海的地壳速度结构与中朝—扬子块体拼合边界

利用中国、韩国和ISC台站的地震走时数据反演了黄海地区的地壳P波速度结构,对比重力异常和断裂体系、Pn波速度及其各向异性,分析了不同地球物理异常的相互关系以及黄海东部和西部的结构差异,为厘定黄海东部断裂暨中朝—扬子块体的拼合边界提供了新的信息.反演结果表明,北黄海和南黄海西部具有沉积盆地的地壳结构特征,P波速度明显偏低且深度较大,说明盆地内部沉积层较厚、沉降幅度较大,以北黄海、南黄海海州湾和苏北—南黄盆地最为突出.南黄海中部、胶东半岛、辽东半岛和朝鲜半岛显示出构造隆起区的地壳速度特征,其中南黄海中部的高速异常具有北东方向的伸展痕迹,与胶东地区的区域构造走向趋于一致,但是与朝鲜半岛的高速异常并不相连,其间存在明显的分界.据此推测南黄海与朝鲜半岛之间可能存在一个近南北方向的深断裂——黄海东部断裂,至于该断裂是否可以作为中朝—扬子块体在海区的拼合边界,尚需获取黄海东部及朝鲜半岛更详细的相关资料提供依据.     

2016年阿克陶MS 6.7地震地表破裂特征和帕米尔现代构造应力场初步分析

帕米尔高原位于地中海－喜马拉雅地震带上,晚新生代以来随着印度板块向欧亚板块持续不断地挤压汇聚,其构造运动是欧亚大陆最强烈的地区。高原腹地发育一系列近SN向正断层,包括近SN向的塔什库尔干正断层所处的帕米尔中部现代区域的构造应力场以EW向水平拉张为主。2016年11月25日发生的阿克陶M_S 6.7级地震的发震构造为塔什库尔干断层分支的NWW向木吉盆地北缘断层,其具有右旋走滑兼正断性质。地震在震中附近产生同震地表形变带,全长约1km,呈近SN－NNE向水平拉伸,发育近EW—NWW向的张裂缝,为地震破裂的产物,张裂缝的最大水平拉伸位移量和最大垂直位移量分别为46cm和16cm。地表破裂带中的NE和NW向张剪裂缝只是连接贯通这些雁列的张裂缝,其水平相对位移量取决于张裂缝的水平拉伸量和张裂缝之间的几何关系。地表形变带表现的拉张性质与帕米尔高原腹地区域现代应力场最大主压应力为垂直向基本一致,可能与深部热物质上涌造成的上地壳拉伸有关。而地表形变带呈近SN向水平拉张,与区域近EW向拉张应力场之间存在显著差异,这可能是木吉盆地北缘右旋走滑正断层阶区局部应力场调整的结果。     

银川地堑地壳挤压应力场:深地震反射剖面

银川地堑位于南北地震带北段,地质结构复杂,活动构造发育.为了调查银川地堑的构造特征及断裂分布情况,布设了NW向跨银川地堑的深地震反射剖面,首次获得银川地堑地壳的精细结构.结果表明,银川地堑具有典型的拉张-挤压型沉积盆地特征,上地壳反射连续性好,层位丰富,能量强,断裂发育.下地壳和莫霍面记录了挤压与拉张的发展过程.奠霍面...     

松辽盆地南部十屋断陷构造特征研究

十屋断陷位于松辽盆地东南隆起区南端,是一个断坳叠置型复合盆地,下部为西断东超单断箕状盆地,地层由西向东部斜坡区逐层超覆.本文通过对700多平方公里三维地震资料的解释成果研究认为,十屋断陷的构造特征呈 “三隆两凹”特征,三隆分别为：中央构造带、秦家屯-艾家构造带和皮家构造带;而其间由两个凹带（十屋深凹区、小宽深凹区）所分割.十屋断陷深层油气主要聚集在这三个构造带上.三个构造带的产生原因与基底断层密切相关.营城组末期和登娄库组末期的构造运动对油气的早期生成和聚集都起到至关重要的作用,在这两期形成的局部构造都是油气聚集的重要场所.     

ANALYSIS OF EVOLUTION OF THE RIYUESHAN FAULT SINCE LATE PLEISTOCENE USING STRUCTURAL GEOMORPHOLOGY

The northeastern margin of Tibetan plateau is an active block controlled by the eastern Kunlun fault zone, the Qilian Shan-Haiyuan fault zone, and the Altyn Tagh fault zone. It is the frontier and the sensitive area of neotectonic activity since the Cenozoic. There are widespread folds, thrust faults and stike-slip faults in the northeastern Tibetan plateau produced by the intensive tectonic deformation, indicating that this area is suffering the crustal shortening, left-lateral shear and vertical uplift. The Riyueshan Fault is one of the major faults in the dextral strike-slip faults systems, which lies between the two major large-scale left-lateral strike-slip faults, the Qilian-Haiyuan Fault and the eastern Kunlun Fault. In the process of growing and expanding of the entire Tibetan plateau, the dextral strike-slip faults play an important role in regulating the deformation and transformation between the secondary blocks. In the early Quaternary, because of the northeastward expansion of the northeastern Tibetan plateau, tectonic deformations such as NE-direction extrusion shortening, clockwise rotation, and SEE-direction extrusion occurred in the northeastern margin of the Tibetan plateau, which lead to the left-lateral slip movement of the NWW-trending major regional boundary faults. As the result, the NNW-trending faults which lie between these NWW direction faults are developed. The main geomorphic units developed within the research area are controlled by the Riyueshan Fault, formed due to the northeastward motion of the Tibet block. These geomorphic units could be classified as:Qinghai Lake Basin, Haiyan Basin, Datonghe Basin, Dezhou Basin, and the mountains developed between the basins such as the Datongshan and the Riyueshan. Paleo basins, alluvial fans, multiple levels of terraces are developed at mountain fronts. The climate variation caused the formation of the geomorphic units during the expansion period of the lakes within the northeastern Tibetan plateau. There are two levels of alluvial fans and three levels of fluvial terrace developed in the study area, the sediments of the alluvial fans and fluvial terraces formed by different sources are developed in the same period. The Riyueshan Fault connects with the NNW-trending left-lateral strike-slip north marginal Tuoleshan fault in the north, and obliquely connects with the Lajishan thrust fault in the south. The fault extends for about 180km from north to south, passing through Datonghe, Reshui coal mine, Chaka River, Tuole, Ketu and Xicha, and connecting with the Lajishan thrusts near the Kesuer Basin. The Riyueshan Fault consists of five discontinuous right-step en-echelon sub-fault segments, with a spacing of 2~3km, and pull-apart basins are formed in the stepovers. The Riyueshan Fault is a secondary fault located in the Qaidam-Qilian active block which is controlled by the major boundary faults, such as the East Kunlun Fault and the Qilian-Haiyuan Fault. Its activity characteristics provide information of the outward expansion of the northeastern margin of Tibet. Tectonic landforms are developed along the Riyueshan Fault. Focusing on the distinct geomorphic deformation since late Pleistocene, the paper obtains the vertical displacement along the fault strike by RTK measurement method. Based on the fault growth-linkage theory, the evolution of the Riyueshan Fault and the related kinetic background are discussed. The following three conclusions are obtained:1)According to the characteristics of development of the three-stage 200km-long steep fault scarp developed in the landforms of the late Pleistocene alluvial fans and terraces, the Riyueshan Fault is divided into five segments, with the most important segment located in the third stepover(CD-3); 2)The three-stage displacement distribution pattern of the Riyueshan Fault reveals that the fault was formed by the growths and connections of multiple secondary faults and is in the second stage of fault growth and connection. With CD-3 as the boundary, the faults on the NW side continue to grow and connect; the fault activity time on the SE side is shorter, and the activity intensity is weaker; 3)The extreme value of the fault displacement distribution curve indicates the location of strain concentration and stress accumulation. With the stepover CD-3 as the boundary, the stress and strain on NW side are mainly concentrated in the middle and fault stepovers. The long-term accumulation range of stress on the SE side is relatively dispersed. The stress state may be related to the counterclockwise rotation inside the block under the compression of regional tectonic stress.