长期静水浸泡对三峡库区滑带土物理-化学-力学性质的影响

三峡水库蓄水使得库岸大量土体长期处于浸泡状态,导致土体软化从而诱发滑坡失稳。为研究长期浸泡对滑坡土体物理-化学-力学性质的影响,以马家沟滑坡原状滑带土为对象开展了浸泡软化试验,通过比较不同浸泡时间滑带土的粒度分布、界限含水率、化学与矿物成分、剪切特性等特征,探讨了滑带土浸泡软化机理。研究结果表明:浸泡过程中滑带土中Ca2+、Mg2+等离子流失较多,但矿物成分无变化;浸泡后滑带土出现阶段性粒度细化现象,液塑限和塑性指数均随黏粒含量增加而增大;随着浸泡时间增加,滑带土应力应变关系在低法向应力下由强软化型变为弱软化型,在高法向应力下由软化型变为硬化型;滑带土抗剪强度参数随着浸泡时间增加呈指数形式降低,黏聚力c降低程度大于内摩擦角φ。研究成果可以为水库滑坡稳定性评价提供理论依据。      

平面剪切岩质边坡滑裂面的确定及稳定性分析

由于传统搜索方法对岩质边坡滑裂面的确定无法兼顾效率与精度, 如何迅速准确确定潜在滑裂面仍然是个难题。极限平衡法在岩质边坡稳定性分析中备受认可, 采用岩质边坡平面剪切滑动模型, 以滑裂面的倾角来表征潜在滑裂面的位置; 基于极值法, 推导了极限平衡条件下平面剪切破坏型岩质边坡潜在滑裂面的解析解, 并结合香港秀茂坪路边坡对其准确性进行了验证, 进一步对四川宜宾打营盘山公路多级边坡进行了整体稳定性分析。结果表明: 香港秀茂坪边坡采用本文方法确定的边坡潜在滑裂面倾角与实际滑坡倾角基本一致。实际工程应用中, 采用Slide软件中布谷鸟搜索法和模拟退火法两种搜索方法得到的滑裂面倾角分别为38.0°和37.0°, 本解析法所得倾角为34.8°; 选用Janbu法、Morgenstern-Price法和Sarma法分别计算对应的稳定系数, 结果均为1.04左右, 本文所得稳定系数为1.15, 可见本文方法所得结果基本准确。通过参数敏感性分析发现, 随着黏聚力的增加, 边坡滑裂面倾角越来越小, 稳定系数也随之增加; 而当内摩擦角增大时, 边坡滑裂面倾角和稳定系数也随之增大。      

Limit equilibrium method (LEM) of slope stability and calculation of comprehensive factor of safety with double strength-reduction technique

When the slope is in critical limit equilibrium(LE) state, the strength parameters have different contribution to each other on maintaining slope stability. That is to say that the strength parameters are not simultaneously reduced. Hence, the LE stress method is established to analyze the slope stability by employing the double strengthreduction(DSR) technique in this work. For calculation model of slope stability under the DSR technique, the general nonlinear Mohr–Coulomb(M–C) criterion is used to describe the shear failure of slope. Meanwhile, the average and polar diameter methods via the DSR technique are both adopted to calculate the comprehensive factor of safety(FOS) of slope. To extend the application of the polar diameter method, the original method is improved in the proposed method. After comparison and analysis on some slope examples, the proposed method's feasibility is verified. Thereafter, the stability charts of slope suitable for engineering application are drawn. Moreover, the studies show that:(1) the average method yields similar results as that of the polardiameter method;(2) compared with the traditional uniform strength-reduction(USR) technique, the slope stability obtained using the DSR techniquetends to be more unsafe; and(3) for a slope in the critical LE state, the strength parameter φ, i.e., internal friction angle, has greater contribution on the slope stability than the strength parameters c, i.e., cohesion.     

Three-dimensional stability of landslides based on local safety factor

Unlike the limit equilibrium method (LEM), with which only the global safety factor of the landslide can be calculated, a local safety factor (LSF) method is proposed to evaluate the stability of different sections of a landslide in this paper. Based on three-dimensional (3D) numerical simulation results, the local safety factor is defined as the ratio of the shear strength of the soil at an element on the slip zone to the shear stress parallel to the sliding direction at that element. The global safety factor of the landslide is defined as the weighted average of all local safety factors based on the area of the slip surface. Some example analyses show that the results computed by the LSF method agree well with those calculated by the General Limit Equilibrium (GLE) method in two-dimensional (2D) models and the distribution of the LSF in the 3D slip zone is consistent with that indicated by the observed deformation pattern of an actual landslide in China.     

基于模型试验的动水驱动型顺层岩质滑坡启滑机制初探

动水驱动型顺层岩质滑坡数量多、灾害频发、危害大, 是滑坡地质灾害领域的研究重点, 但目前对于滑坡启滑机制的认识仍不充分, 滑坡的准确预报还面临巨大挑战。鉴于此, 以含软弱夹层的中倾角顺层岩质滑坡为研究对象, 通过构建理想的单层滑带滑坡物理模型, 开展了一系列动水作用下的滑坡模型试验研究。结果表明, 动水作用下顺层岩质滑坡从开始变形至失稳滑动需经历初始变形、缓慢变形、加速变形和失稳破坏4个阶段, 而各个阶段的演化特征与滑面粗糙度和倾角密切相关。滑面倾角越大或粗糙度越小, 滑坡体从开始变形至失稳滑动所需的时间则越短; 相应地, 坡体加速变形阶段越不明显, 滑坡破坏的突发性越强。滑带内的渗流冲蚀作用会使滑带土中的骨料流失, 导致其抗剪强度降低, 进而引发坡体滑动。与此同时, 上覆坡体的压剪作用以及变形演化过程亦将反过来影响冲蚀强度。基于滑带土黏聚力随水力梯度和冲蚀时间的变化关系, 提出了渗流驱动下滑带土黏聚力演化模型, 可较好地描述滑带土黏聚力的退化过程。滑面粗糙度的存在不仅显著影响了滑带的冲蚀劣化规律, 还改变了滑带不同区域的破坏模式。此外, 通过考虑滑面粗糙度对滑带不同区域破坏模式的影响, 开展了动水多效应关联分析, 建立了滑坡地质体力学分析模型, 实现了动水作用下顺层岩质滑坡动态稳定性的有效评估。本研究成果可为实际动水驱动型顺层岩质滑坡的预测和防治提供理论参考。      

数字摄影测量的发展与展望

简要说明了数字摄影测量的发展,提出了数字摄影测量快速发展方向的问题,介绍了在数字摄影测量发展过程中出现的新的理论与实践,并指出GIS数据更新是数字摄影测量发展的重要方向,数字近景摄影测量则是摄影测量发展的崭新领域。     

Inversion analysis of the shear strength parameters for a high loess slope in the limit state

It is difficult to obtain reliable shear strength parameters for the stability analysis and evaluation of high loess slopes.Hence,this paper determines slope elements and physical parameter of 79 slopes with heights of[40,120]m based on the measured loess slopes in the Ganquan and Tonghuang subregions of northern Shaanxi Province,China.In the limit state of the loess slope(stability factor Fs is 1.0),a fitting equation for the slope height and width is established.Then,the model is developed by stability analysis software-SLOPE/W,and the comprehensive shear strength parameters corresponding to different slope heights of the high slope in the study area are obtained by inversion using the Morgenstern-Price method.The results show that when the height of the slope increases,the cohesion c increases in the soil,and the internal friction angle j decreases.This change is consistent with the characteristics reflected in the composition and physical properties of the slopes,and the comprehensive strength parametric curves are very similar between the Ganquan subregion and the Tonghuang subregion.A landslide that occurred in Miaodian-zaitou of Jingyang County,Shaanxi Province,is selected to verify this inversion method,and the results show that the calculated shear strength parameters of the inversion are consistent with the measured value of the actual slope.     

Z���ζϲ�ϵͳ����Ӧ�䶸��ʱ�շֲ�����ֵģ��

????Z???ζ????????????????ο?????FLAC??3D??????о????????????????????????9??????????????????????й???????????????о?????????????λ???????м????????????????????м??????????????????????????????Щ??????????й???????Щ???????????й??????????????????????????д??????????????????????????     

基于一阶线性应变软化理论的边坡稳定性研究

在持续降雨或开挖卸荷作用下, 土体的强度指标会发生劣化, 但现今采用的边坡稳定性计算大多直接将其视为一个常数。为接近真实的边坡失稳破坏模式, 基于瑞典条分法以及一阶线性应变软化机制, 提出了一种边坡渐进破坏分析新方法, 推导出应变软化型边坡极限平衡表达式, 并获得了各破坏进度下边坡的安全系数。通过对模拟算例进行分析, 证明了条分-软化法的可靠性, 且计算结果表明渐进破坏过程中安全系数不仅取决于边坡的破坏方式与强度参数, 还与岩土体的软化模量密切相关。同时, 通过与滑坡实际案例的对比验算, 证实其强度指标存在不同的衰减系数, 即黏聚力的衰减系数大于摩擦角。从理论到应用, 最终获得的条分-软化法, 不仅考虑了岩土体的强度劣化效应以及滑动面的渐进发展, 还能有效地服务于实际工程背景下边坡的稳定性分析, 可以为滑坡的预防与治理提供指导建议。      

Evaluation of the possible slip surface of a highly heterogeneous rock slope using dynamic reduction method

A new method, the dynamic reduction method (DRM) combined with the strain-softening method, was applied to evaluate the possible slip surface of a highly heterogeneous rock slope of the Dagangshan hydropower station in Southwest China. In DRM, only the strength of the failure elements is reduced and the softening reduction factor K is adopted to calculate the strength parameters. The simulation results calculated by DRM show that the further slip surface on the right slope of the Dagangshan hydropower station is limited in the middle part of the slope, while both SRM (strength reduction method) and LEM (limit equilibrium method) predict a failure surface which extends upper and longer. The observations and analysis from the three recorded sliding events indicate that the failure mode predicted by DRM is more likely the scenario. The results in this study illustrate that for highly heterogeneous slopes with geological discontinuities in different length scales, the proposed DRM can provide a reliable prediction of the location of the slip surface.     

基于室内大型剪切试验及工程地质类比法的弃渣场抗剪强度参数综合取值与稳定性研究

目前工程实践中弃渣场抗剪强度参数主要采用工程地质类比法进行取值, 参数误差较大, 有必要采用多种方法对弃渣场抗剪强度参数进行综合取值研究。以某公路弃渣场为工程实例, 通过室内颗分试验确定弃渣场弃渣的颗粒级配, 在此基础上采用室内大型剪切试验及工程地质类比法综合确定该弃渣的抗剪强度参数, 并以此参数计算弃渣体的稳定性。计算结果表明, 弃渣体在天然工况条件下稳定性系数为1.369, 在暴雨工况条件下稳定性系数为1.083, 弃渣场在计算工况条件下处于基本稳定-稳定状态, 与现场巡查及监测结果基本一致。说明该弃渣抗剪强度参数取值比较合理准确, 可为公路弃渣场参数取值提供参考。      

不同环剪条件下三峡库区童家坪滑坡滑带土强度特性

研究不同环剪条件下库岸堆积层滑坡滑带土强度特性对滑坡稳定性评价具有重要意义。针对目前在库岸堆积层滑坡滑带土力学特性方面研究薄弱的问题, 以三峡库区童家坪滑坡滑带土为研究对象, 采用ARS-E2环剪仪开展了不同剪切速率下的剪切试验, 研究了等速剪切、加速剪切以及减速剪切作用下滑带土强度变化特征。试验结果表明: 滑带土试样在恒定的低速剪切条件下更容易得到稳定的残余强度, 并且达到峰值强度后易出现"应变软化"现象; 在相同剪切应力条件下, 滑带土加速环剪和减速环剪的剪应力变化趋势基本一致, 与法向应力均呈正相关关系; 剪切速率的变化会显著影响滑带土峰值黏聚力的大小。研究成果揭示了不同环剪条件下滑带土力学特性, 可以为揭示库岸堆积层滑坡变形破坏的力学机制提供理论依据。      

Landslide stability for Shuitianba in the Three Gorges area

According to the data of preliminary survey, the authors established a landslide geological model,on the basis of analyses on the sensitivity of landslide, tried to simulate and calculate the landslide stability of Shuitianba with the method of transfer coefficient when it is under different strength parameters, and study the landslide mechanism. The results show that it is sensitive to the effects of shear strength parameters of sliding zone and groundwater level on landslide stability safety coefficient, which provides reliable basis for calculation of landslide stability.     

一种新的聚焦点不同的近景影像融合方法

近景摄影测量是实现地面目标高精度三维建模的主要方法之一。实际摄影测量过程中,普通数字摄像机在拍摄与镜头距离不同的多个目标时,无法同时聚焦到所有目标而使近景影像各处都清晰。本文以不同聚焦点近景影像的融合为研究内容,以图像一层小波分解的高频系数能量为影像清晰度衡量指标。通过计算小波影像能量,将整幅影像划分为清晰区域、模糊区域及二者的交界区域。对于清晰区域和模糊区域,将清晰区域的像元值直接应用于融合影像,而对于二者的交界区域,将curvelet变换所得初始融合影像的像元值应用于对应位置处的融合影像,从而得到融合影像。最后,用两组实例数据对融合方法进行了验证,并采用信息熵、均方根误差和峰值信噪比三种客观评价准则,对所得融合影像进行定量分析。     

�����������������Ӱ����Զ��򷽷��о�

???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????о??????????????????????????????????????????????????????????????????????????????????????????????????????????????????     

基于内外功率比的非直线坡面型边坡的稳定系数研究

在边坡稳定性上极限分析中, 由于考虑了材料的理想弹塑性本构关系与相关流动法则, 相比极限平衡法更符合岩土材料的特征。在以往的二维边坡极限分析上限法中, 要求坡面形态为规则的直线, 而无论是天然边坡还是人工边坡, 边坡的坡面形态往往并非规则的直线。此外, 以往的边坡极限上限分析中得到的稳定数N_s=c/γH主要针对土坡的临界高度计算, 且未考虑孔压等外力对边坡施加的外功率。不同于传统极限平衡法采用静力学的平衡条件, 本研究针对非直线型坡面边坡稳定性问题, 假定滑动面为对数螺旋线, 基于极限分析上限定理和虚功原理, 提出了一种边坡发生旋转破坏时旋转中心的确定方法, 推导出了非直线型坡面边坡的重力虚功功率和能量平衡方程的解析解, 并提出了基于内、外功率之比的稳定系数K用以评价边坡的稳定性。通过算例比较了不同形态天然边坡的稳定性和人工削坡对边坡稳定性的影响, 并分析了边坡的坡度(β)、土体的内摩擦角(φ)、黏聚力(c)以及孔压系数(r_u)对稳定系数K的影响规律。对于坡度较大的边坡, 通过削坡改变坡面形态提高了边坡的稳定系数K。稳定系数K随黏聚力的增加而非线性增大, 随孔压系数的增加而降低。当黏聚力相对于孔压系数对边坡稳定性影响更大时, 稳定系数K随内摩擦角的增加而增大; 反之, 稳定系数K则随内摩擦角的增加而减小。以上结果符合对边坡稳定性分析的普遍认知, 验证了模型的合理性。另外, 通过将该方法与传统的Bishop法的计算结果进行对比, 发现安全系数F_s=1与稳定系数K=0的临界状态物理意义相同, 稳定系数K随黏聚力非线性增加, 更符合边坡的渐进破坏过程。      

球形全景影像核线方程推导及其应用

核线约束是影像在数字摄影测量中的一项核心技术,可限制同名像点的搜索范围,显著提高计算效率和可靠性。目前,核线约束在传统中心投影影像与卫星扫描影像上取得了广泛的应用,而全景影像具有不同的几何模型,核线模型的推导与应用存在很大的难度。以往实现全景三维重建方法大多通过不同方位影像,应用大量的控制点,结合光束法平差以实现构筑物三维重构,缺乏球形全景核线数学方程的推导及应用。鉴此,本文通过对球形全景影像的投影几何研究,基于共面方程建立该类影像的核线几何模型,推导出数学方程及其特性,为核线在球形全景影像中的应用提供了理论基础,实验表明该球形全景核线方程的正确性与可行性。     

橡胶纤维-砂混合料力学特性的离散元三轴试验研究

橡胶砂作为一种轻质填料在岩土工程中具有良好的应用前景，为揭示橡胶纤维-砂混合料强度特性、偏应力-轴向应变曲线及微观结构的变化规律，开展了橡胶纤维-砂不同配比的三轴剪切试验，基于颗粒流理论和PFC3D程序，对橡胶纤维-砂混合料的三轴剪切试验进行了数值模拟，并与室内试验结果进行了比较。结果表明:随着橡胶含量的增加，试样的应力-应变关系由应变软化型向应变硬化型过渡，试样剪切过程中体变形式逐渐由体胀型变为体缩型；同一围压下橡胶纤维含量高的试样变形模量小，表明橡胶材料的掺入有助于增强试样的压缩性能。      

极限平衡方法在夏日哈木镍钴矿山拟建露天采场边坡角优化中的应用

夏日哈木镍钴矿为大型镍钴硫化物矿床,现拟建大型露天采场,边坡采用分台阶式高边坡,最高边坡高度超过600m。该工程具有开挖成本高,边坡一但失稳后果严重的特点。为此需要选择一个即节约经济成本又保障整体边坡稳定的最佳边坡角。本文采取Geostudio软件中的Slope模块极限平衡方法对拟建露天采场假设开挖边坡角的整体边坡稳定性进行分析,提出最佳设计边坡角。　本次边坡角优化的思路：首先根据场地工程地质条件和拟建边坡的高度等因素将拟建边坡划分为5个区,选择典型边坡工程地质剖面并进行工程地质岩体分段,然后通过岩石强度指标折减计算（本文采用费辛柯法、M.Georgi法和经验法）给各分段的岩体赋予凝聚力、内摩擦角等计算参数,采用极限平衡方法（Geostudio软件中的Slope模块法）对不同角度下对各分区边坡的破坏形式及安全系数进行计算,最后提出了各分区边坡的最佳设计边坡角。     

Simulation study of the void space gas effect on slope instability triggered by an earthquake

This study aims at exploring the void space gas effect of earthquake-triggered slope instability and providing a new method for studying the formation mechanism of earthquake-triggered landslides. We analysed the basic characteristics, kinematic characteristics, initiation mechanisms and physical mechanical parameters of the Daguangbao landslide, generalized a landslide prototype, and established a geological model and performed simulation tests. Based on the seismic wave propagation theory of rock-soil mass, rock fracture mechanics and the effective stress principle, we found that the void space gas effect is due to the occurrence of excess void space gas pressure when the dynamic response of seismic loads impacts the void space gas in weak intercalated layers of the slope. The excess void space gas pressure generated by the vibration(earthquake) damages the rock mass around the void space with a certain regularity. The model test results show that the effective shear strength of the rock mass can be reduced by 4.4% to 21.6% due to the void space gas effect.