Tharsis block tectonics on Mars

The concept of block tectonics provides a framework for understanding many aspects of Tharsis and adjoining structures. This Tharsis block tectonics on Mars is manifested partly by mantle-related doming and partly by response to loading by subsequent volcanic construction. Although the origin of the volcanism from beneath Tharsis is a subject of controversy explanations have to include inhomogenities in Martian internal structure, energy distribution, magma accumulation and motion below the lithosphere. Thermal convection can be seen as a necessary consequence for transient initial phase of Martian cooling. This produced part of the elevated topography with tensional stresses and graben systems radial to the main bulge. The linear grabens, radial to the Tharsis center, can be interpreted to indicate rift zones that define the crustal block boundaries. The load-induced stresses may then have contributed on further graben and ridge formation over an extended period of time.On leave from Dept. of Astronomy University of Oulu, Oulu, Finland.     

Tectonics of Tharsis dorsa on Mars

The tectonics of the Tharsis and adjoining areas is considered to be associated with the convection in the Martian mantle. Convection and mantle plume have been responsible for the primary uplift and volcanism of the Tharsis area. The radial compressional forces generated by the tendency for downslope movement of surface strata, vertical volcanic intrusions and traction of mantle spreading beneath Tharsis were transmitted through the lithosphere to form peripheral mare ridge zones. The locations of mare ridges were thus mainly controlled by the Tharsis-radial compression. The load-induced stresses then contributed on further ridge formation over an extended period of time by the isostatic readjustment which was reponsible for long-term stresses in the adjoining areas. Extrusions, changes in internal temperature and possible phase changes may also have caused changes in mantle volume giving rise to additional compressional forces and crustal deformations.On leave from Dept. of Astronomy, University of Oulu, Oulu, Finland     

Composite graben tectonics of Alba Patera on Mars

The Alba Patera main graben zone is radial to the Tharsis bulge, indicating the importance of the Tharsis bulge-related peripheral rift tectonics. The concentric grabens around the Alba Patera area are also partly caused by crustal bending due to the central load of the Alba Patera volcano. These two graben sets partly coincide forming composite structures. Both tectonic systems were still active after the last major volcanic lava extrusions took place. After this, the crater chain grabens, radial to the northernmost part of the Tharsis bulge were formed. These collapse craters were evidently caused by the late-tectonic forces due to the northern Tharsis and adjoining lava loads, resulting in flexural tension and activating previous faults.     

Gravity studies of the Tharsis area on Mars

The Tharsis rise on Mars with a diameter of about 8000 km and an elevation up to 10 km shows extensive volcanism and an extensional fracture system. Other authors explained this structure by (I) an uplift due to mantle processes and by (II) volcanic construction. Gravity models of four profiles are in accordance with a total Airy isostatic compensation of the whole rise with mean crustal thicknesses of 50 km and 100 km. But two regions exhibit significant mass deficits: (i) the area between Olympus Mons and the three large Tharsis volcanoes and (ii) central Tharsis. This can be explained by (1) a heated upper mantle, (2) a chemically modified upper mantle, (3) a crustal thickening, or (4) a combination of these three processes. Crustal thickening is mainly a constructional process, but the mass deficit should contribute to a certain degree of uplift causing the extensional area of Labyrinthus Noctis. Gravity modelling results in a different isostatic state of the three Tharsis volcanoes. Pavonis Mons is not compensated, Ascraeus Mons is highly or totally compensated, and Arsia Mons is medium or not compensated. The large, flat volcanic structure Alba Patera has been explained by a hot spot with an evolution of a mantle diapir.The results have shown that the Tharsis rise is a very complex structure. The central and eastern part of the rise is characterized by extensional features and a mass deficit (Extensional Province). The western part is dominated by many volcanic features and a central elongated mass deficit (Volcanic Province). The northern part consists of Alba Patera. It seems unlikely that the whole rise has been generated by one stationary large axisymmetric plume or hot spot. There could have been one or more active hot spots with an evolution in space and time.Contribution Nr. 421, Institut für Geophysik der Universität Kiel, Germany.     

Mars

Mars is the fourth planet out from the sun. It is a terrestrial planet with a density suggesting a composition roughly similar to that of the Earth. Its orbital period is 687 days, its orbital eccentricity is 0.093 and its rotational period is about 24 hours. Mars has two small moons of asteroidal shapes and sizes (about 11 and 6 km mean radius), the bigger of which, Phobos, orbits with decreasing semimajor orbit axis. The decrease of the orbit is caused by the dissipation of tidal energy in the Martian mantle. The other satellite, Deimos, orbits close to the synchronous position where the rotation period of a planet equals the orbital period of its satellite and has hardly evolved with time. Mars has a tenous atmosphere composed mostly of CO with strong winds and with large scale aeolian transport of surface material during dust storms and in sublimation-condensation cycles between the polar caps. The planet has a small magnetic field, probably not generated by dynamo action in the core but possibly due to remnant magnetization of crustal rock acquired earlier from a stronger magnetic field generated by a now dead core dynamo. A dynamo powered by thermal power alone would have ceased a few billions of years ago as the core cooled to an extent that it became stably stratified. Mars' topography and its gravity field are dominated by the Tharsis bulge, a huge dome of volcanic origin. Tharsis was the major center of volcanic activity, a second center is Elysium about 100° in longitude away. The Tharsis bulge is a major contributor to the non-hydrostaticity of the planet's figure. The moment of inertia factor together with the mass and the radius presently is the most useful constraint for geophysical models of the Martian interior. It has recently been determined by Doppler range measurements to the Mars Pathfinder Lander to be (Folkner et al. 1997). In addition, models of the interior structure use the chemistry of the SNC meteorites which are widely believed to have originated on Mars. According to the models, Mars is a differentiated planet with a 100 to 200 km thick basaltic crust, a metallic core with a radius of approximately half the planetary radius, and a silicate mantle. Mantle dynamics is essential in forming the elements of the surface tectonics. Models of mantle convection find that the pressure-induced phase transformations of -olivine to -spinel, -spinel to -spinel, and -spinel to perovskite play major roles in the evolution of mantle flow fields and mantle temperature. It is not very likely that the -spinel to perovskite transition is present in Mars today, but a few 100 km thick layer of perovskite may have been present in the lower mantle immediately above the core-mantle boundary early in the Martian history when mantle temperatures were hotter than today. The phase transitions act to reduce the number of upwellings to a few major plumes which is consistent with the bipolar distribution of volcanic centers of Mars. The phase transitions also cause a partial layering of the lower mantle which keeps the lower mantle and the core from extensive cooling over the past aeons. A relatively hot, fluid core is the most widely accepted explanation for the present lack of a self-generated magnetic field. Growth of an inner core which requires sub-liquidus temperatures in the core would have provided an efficient mechanism to power a dynamo up to the present day. Received 10 May 1997     

Tharsis province of Mars: Geologic sequence,geometry, and a deformation mechanism

The early history of Mars included two large-scale events of great significance: (1) the lowering and resurfacing of one-third of the crust, followed closely by (2) evolution of the Tharsis bulge. Tharsis development apparently involved two stages: (1) an initial rapid topographic rise accompanied by the development of a vast radial fault system, and (2) an extremely long-lived volcanic stage apparently continuing to the geologic present. A deformational model is proposed whereby a first-order mantle convection cell caused early subcrustal erosion and foundering of the low third of the planet. Underplating and deep intrusion by the eroded materials beneath Tharsis caused isostatic doming. Minor radial gravity motions of surficial layers off the dome produced the radial fault system. The hot underplate eventually affected the surface to cause the very long-lived volcanic second stage. Deep crustal anisotropy associated with the locally NE-trending boundary between the highland two-thirds and the lowland one-third caused the NE elongation of many features of Tharsis.     

The crustal dichotomy of Mars

The crustal dichotomy of Mars describes the topographic division between the young plains in the northern hemisphere and the old terrain in the southern hemisphere. The highland-lowland boundary separates the younger plains from the older, high-standing terrain and consists of three geologically-distinct regions: the Tharsis Province, the chaotic terrain, and the fretted terrain (which includes gradational boundary types)-all are characterised by tensional tectonics. This paper presents new geological evidence that shows the topographic division at the fretted terrain formed in the late Noachian-early Hesperian time period: the same time period in which the Tharsis Province and chaotic terrain formed, and fracturing of a southern-hemisphere-type surface beneath the northern plains occurred. These are inherent features of the crustal dichotomy, indicating it must have also formed during the late Noachian-early Hesperian time period. An analogy is made between the northern lowlands and sedimentary basins on Earth: both are basin like and are surrounded by provinces that have been subjected to pronounced tensional tectonics. This paper uses the White and McKenzie model (1989a) to propose that a lithospheric-stretching event on Mars, in the late Noachian-early Hesperian time period, produced the crustal dichotomy; the Tharsis Province formed by uplift (over a sub-surface hotspot) and gave rise to lithospheric stretching, and the northern lowlands formed by subsidence (over normal asthenospheric temperatures). Detachment faults, operating from the Tharsis Province and around northern lowlands, allowed structural equilibrium and large lithospheric extensions to be attained during this period: they also defined the geometry of the lowlands. The proposal is supported with calculations used to estimate the amount of subsidence that can be achieved in this way.     

Implications of lithospheric bending and faulting in lunar mare-terra tectonics

It is evident that lunar mare basins have been subsiding and one reason for such subsidence was the existence of their mascons and their volcanic fills as loads that flexed the lithosphere. The additional effects of drying up and cooling of internal hot volumes may also have been important, leading to still more compressional mare environment. The remaining relicic thermal pulse-induced dilatation within large areas surrounding the mare basins may be responsible for the extensional rille tectonics together with the flexural peripheral bulge due to tensional arching and bending due to differences in internal volume changes. The internal attack against the lunar crust has been quite different above and below the mean surface. Below this level the old crust was more easily attacked by volcanic extrusions, causing thick lava covers and, as a consequence, broken by compressional forces; while above this level the old crust has instead been temporarily and in places attacked by tensional forces in dimensions determined by the internal energy sources and their interaction with the lithospheric roof, thus enabling the internal forces together with flexural bending to dome and fault the upper crustal surface to some extent in respect to mare areas. The rille formation can be characterized by peripheral bulging and bending. The share of asthenosphere-related effects in lunar tectonics must be considered to have been very important. If only lava load and mascons have raised compression within mare areas and tension within the surrounding terra how can be explained those rille graben which do not have any extra mass concentrations nor lavas on their sides and why some major mascon basins have so few tensional rille graben structures around them?     

A plume tectonics model for the Tharsis province, Mars

Morphological and structural data from the whole Tharsis province suggest that a number of shallow grabens radially oriented about the Tharsis bulge on Mars are underlain by dykes, which define giant radiating swarms similar to, e.g. the Mackenzie dyke swarm of the Canadian shield. Mechanisms for graben formation are proposed, and the depth, width, and height of the associated dykes are estimated. Structural mapping leads to define successive stages of dyke emplacement, and provide stress-trajectory maps that indicate a steady source of the regional stress during the whole history of the Tharsis province. A new tectonic model of Tharsis is presented, based on an analogy with dyke swarms on the Earth that form inside hot spots. This model successfully matches the following features: (1) the geometry of the South Tharsis Ridge Belt, which may have been a consequence of the compressional stress field at the boundary between the uplifted and non-uplifted areas in the upper part of the lithosphere at the onset of hot spot activity; (2) extensive lava flooding, interpreted as a consequence of the high thermal anomaly at the onset of plume (hot spot) activity; (3) wrinkle ridge geometry in the Tharsis hemisphere, the formation of which is interpreted as a consequence of buoyant subsidence of the brittle crust in response to the lava load; (4) Valles Marineris limited stretching by preliminary passive rifting, and uplift, viewed as a necessary consequence of adiabatic mantle decompression induced by stretching. The geometrical analysis of dyke swarms suggests the existence of a large, Tharsis-independent extensional state of stress during all the period of tectonic activity, in which the minimum compressive stress is roughly N---S oriented. Although magmatism must have loaded the lithosphere significantly after the plume activity ceased and be responsible for additional surface deformations, there is no requirement for further loading stress to explain surficial features. Comparison with succession of magmatic and tectonic events related to hot spots on the Earth suggests that the total time required to produce all the surface deformation observed in the Tharsis province over the last 3.8 Ga does probably not exceed 10 or 15 Ma.     

Major volcanic landform formation on Venus: Possible determination by compression tectonics and crustal thickening

While low level shield volcanoes have formed on Venus, major volcanic structure formation in Ishtar Terra has been restricted to caldera formation. It is possible that the combination of compression tectonics and crustal thickening inhibits the amount of magma which reaches the surface in Ishtar Terra. In certain situations, coronae on Venus may form as undeveloped volcanic structures due to restricted magma rise in thick crustal areas.     

The rocks of Mars,from far and near

Abstract— The age, structure, composition, and petrogenesis of the martian lithosphere have been constrained by spacecraft imagery and remote sensing. How well do martian meteorites conform to expectations derived from this geologic context? Both data sets indicate a thick, extensive igneous crust formed very early in the planet's history. The composition of the ancient crust is predominantly basaltic, possibly andesitic in part, with sediments derived from volcanic rocks. Later plume eruptions produced igneous centers like Tharsis, the composition of which cannot be determined because of spectral obscuration by dust. Martian meteorites (except Allan Hills 84001) are inferred to have come from volcanic flows in Tharsis or Elysium, and thus are not petrologically representative of most of the martian surface. Remote‐sensing measurements cannot verify the fractional crystallization and assimilation that have been documented in meteorites, but subsurface magmatic processes are consistent with orbital imagery indicating thick crust and large, complex magma chambers beneath Tharsis volcanoes. Meteorite ejection ages are difficult to reconcile with plausible impact histories for Mars, and oversampling of young terrains suggests either that only coherent igneous rocks can survive the ejection process or that older surfaces cannot transmit the required shock waves. The mean density and moment of inertia calculated from spacecraft data are roughly consistent with the proportions and compositions of mantle and core estimated from martian meteorites. Thermal models predicting the absence of crustal recycling, and the chronology of the planetary magnetic field agree with conclusions from radiogenic isotopes and paleomagnetism in martian meteorites. However, lack of vigorous mantle convection, as inferred from meteorite geochemistry, seems inconsistent with their derivation from the Tharsis or Elysium plumes. Geological and meteoritic data provide conflicting information on the planet's volatile inventory and degassing history, but are apparently being reconciled in favor of a periodically wet Mars. Spacecraft measurements suggesting that rocks have been chemically weathered and have interacted with recycled saline groundwater are confirmed by weathering products and stable isotope fractionations in martian meteorites.     

Stress models for Tharsis formation, Mars

A critical survey is presented of most stress models proposed for the formation of the tectonic structures in the Tharsis volcano-tectonic province on Mars and provides new constraints for further models. First papers, in the 1970s, attempted to relate the Tharsis formation to asthenospheric movements and lithosphere loading by magma bodies. These processes were then quantified in terms of stress trajectory and magnitude models in elastic lithosphere (e.g. Banerdt et al., J. Geophys. Res. 87(B12), 9723–9733, 1982). Stresses generated by dynamic lithosphere uplift were rapidly dismissed because of the poor agreement between the stress trajectories provided by the elastic models and the structural observations. The preferred stress models involved lithosphere loading, inducing isostatic compensation, and then lithosphere flexure. Some incomsistency with structural interpretation of Viking imagery has been found. In the early 1990s, an attempt to solve this problem resulted in a model involving the existence of a Tharsis-centred brittle crustal cap, deteched from the strong mantle by a weak crustal layer (Tanaka et al., J. Geophys. Res. 96(E1), 15617–15633, 1991). Such a configuration should produce loading stresses akin to those predicted by some combination of the two loading modes. This model has not been quantified yet, however it is expected to reconcile stress trajectories and most structural patterns. Nevertheless, some inconsistencies with observed structures are also expected to remain. Parallel to this approach focused on loading mechanisms, the idea that volcanism and tectonic structures could be related to mantle circulation began to be considered again through numerical convection experiments, whose results have however not been clearly correlated with surface observations. Structural clues to early Tharsis dynamic uplift are reported. These structures have little to do with those predicted by elastic stress modelling of dynamic lithosphere uplift. They denote the existence of unsteady stress trajectories responsible for surface deformations that cannot be readily predicted by elastic models. These structures illustrate that improving current stress models for Tharsis formation shall come from deeper consideration of rock failure criterion and load growth in the lithosphere (e.g. Schultz and Zuber, J. Geophys. Res. 99(E7), 14691–14702, 1994). Improvements should also arise from better understanding rheological layering in the lithosphere and its evolution with time, and from consideration of stress associated to magma emplacement in the crust, which may have produced many tectonic structures before loading stress resulting from magma freezing became significant (Mège and Masson, Planet. Space Sci. 44, 1499–1546, 1996a).     

Unveiling the origin of radial grabens on Alba Patera volcano by finite element modelling

The Tharsis region is an 8000-km-wide structural dome that incorporates a concentration of the main volcanic and tectonic activity on the Planet Mars. The area of structural doming is characterised by giant radial graben-dike systems. Nested on a set of these giant dikes to the northern side of Tharsis, is Alba Patera, one of the largest volcanoes in the planetary system. The regional dikes there are in arcuate arrangement and imply an E-W to NW-SE regional extension at Alba Patera. To assess the influence of regional and local tectonics, we studied the dike orientations on the volcano with Viking mosaic data and simulated plausible stress fields with finite element modelling. We found that the influence of a NW-SE regional extension was strong near the volcano centre but decreased rapidly in importance towards the northern pole, i.e., far from the Tharsis centre. By combining this regional stress with a broad uplift that is due to a buoyancy zone of about 1400 km in lateral extent and centred under Alba Patera, we reproduced the radial pattern of dike swarms that diverge from the Tharsis trend. Regional tectonics may have dominated the early stages of dike injection. During the evolution of Alba Patera, however, local updoming controlled the dike pattern, supporting the idea of a hotspot under Alba Patera. The well-expressed dike geometry and characteristics of Alba Patera provide an ideal example for comparative study with analogue hotspots on Earth where plate tectonics and active erosion may complicate the reconstruction of volcanic and tectonic history and the understanding of involved geodynamic processes.     

The cause for the north-south orientation of the crustal dichotomy and the equatorial location of Tharsis on Mars

The crustal dichotomy and the Tharsis rise are the most prominent topographic features on Mars. The dichotomy is largely an expression of different crustal thicknesses in the northern and southern hemispheres, while Tharsis is centered near the equator at the dichotomy boundary. However, the cause for the orientation of the dichotomy and the equatorial location of Tharsis remains poorly understood. Here we show that the crustal thickness variations associated with the dichotomy may have driven true polar wander, establishing the north-south orientation of the dichotomy very early in martian history. Such a reorientation that placed the dichotomy boundary near the equator would also have constrained the Tharsis region on the dichotomy boundary to have originated near the equator. We present a scenario for the early generation and subsequent reorientation of the hemispheric dichotomy, although the reorientation is independent of the formation mechanism. Our results also have implications for the sharply different remanent magnetizations between the two hemispheres.     

Comparison of Earth and Mars as differentiated planets

Histories of the terrestrial planets are traceable to combinations of to five large-scale postaccretion processes: planetary differentiation, crustal differentiation, outgassing, plate tectonics, and recycling. All have operated on Earth to make a planet that was early differentiated into core, mantle, and crust and at very nearly the same time outgassed to form a differentiated crust, atmosphere and oceans. This gave rise to plate tectonics, recycling and thus two-way communication of the surface crust-atmosphere-ocean system with lower crust and upper mantle. Recycling of the Martian surface is probably restricted to limited chemical weathering of thin alteration surfaces of primary minerals because of the extreme slowness of diffusion controlled alteration where surfaces are not stripped by solution. There is evidence for neither subsidence of sedimentary basins nor subduction zones; thus internal recycling and two-way surface-interior communication is improbable. All sedimentary particles produced by mechanical erosion on Mars through its history are still at the surface or shallowly buried by later sediment. Any atmospheric components reacted with weathering crust are removed from the atmosphere. These and exospheric escape processes must have early reduced an original denser atmosphere to its present pressure after an early episode of planetary differentiation coupled to crustal differentiation and out-gassing. The early history of Mars may have been something like that of Earth until weathering and gas escape drew down its atmosphere.     

Tectonic patterns on a reoriented planet: Mars

Both geologic and free-air-gravity data suggest that the positive mass anomaly associated with the Tharsis volcanoes may have reoriented Mars' lithosphere by as much as 25°. Since Mars is oblate (with flattening $\text{? ?0.005}$), rotation of the lithosphere over the equatorial bulge by 25° produces membrane stresses of several kilobars, large enough to initiate faulting. These stresses were first evaluated by F.A. Vening-Meinesz (1947, Trans. Amer. Geophys. Union28, 1–61) who treated the lithosphere as a thin elastic shell. The fracture patterns which result from these stresses are determined by the relation between stress and faulting proposed by E.M. Anderson (1951, The Dynamics of Faulting, Oliver & Boyd, Edinburgh). Plots of the magnitude and direction of stresses in a reoriented planet show that near Tharsis the dominant fault type should be north-south- trending normal faults. This normal fault province is centered about 30°N latitude and extends about 45° east and west in longitude. Similar faults should occur at the antipodes, north of Hellas Planitia. The polar regions should be occupied by roughly north-south-trending thrust faults which extend close to the equator south of Tharsis and north of Hellas. The regions between Tharsis and Hellas are subject to compression on a NE-trending axis and extension along a NW axis east of Tharsis (west of Tharsis the directions are NW compression and NE extension), thus predicting a zone of NNW and ENE strike slip faults east of Tharsis (NNE and WNW west of Tharsis). Although these patterns, except for the north-south normal faults north of Tharsis, have not yet been recognized, the discovery of such a tectonic system of the same age as Tharsis would provide strong support for the reorientation idea. Stresses due to reorientation appear to have little to do with Valles Marineris, since the stress normal to the axis of the Valles is predicted to be compressive, whereas geologic evidence suggests extension.     

Spectrophotometry of Comet Austin (1982g) during post-perihelion period

Lunar crustal shortening does not seem to be restricted to the lava-filled basins alone; but there are some young scarp-like terra ridges in places around mare areas where they often continue other tectonic structures. This crustal shortening has not reached the same intensity as in the case of the lobate scarp overthrusts on Mercury. Young lunar terra ridges indicate that crustal shortening with an areal extent also took place slightly around mare basins. Thus they link tensional rille tectonics with compressional mare ridge tectonics and indicate that areal heating/bending/extension — cooling/ shortening/compression may describe an important explaining factor in lunar mare- and near-mare tectonics in addition to the volcanic extrusions.     

A lunar crustal gravity model across the Triesnecker-Hyginus area,Mare Tranquillitatis,and Mare Fecunditatis

LOS Bouguer gravity anomalies have been calculated from a low altitude LOS free air Doppler gravity profile across northern Mare Fecunditatis, southern Mare Tranquillitatis and the Aridaeus Rille. The Hyginus-Triesnecker area has been included in model calculations, though here only free air anomalies are present. A crustal density model has been fitted to the Bouguer anomalies and to the free air anomalies in the case of the Hyginus-Triesnecker area.On a regional scale northern Fecunditatis has Bouguer anomalies up to 80 mgal and lithostatic stresses of 29 bar and thus is nearly in isostatic equilibrium. Tranquillitatis can be divided into three regions of different crustal structure: (1) northern Tranquillitatis with only minor free air gravity anomalies is more or less in isostatic balance, (2) the southeastern region with Bouguer anomalies to –100 mgal and lithostatic stresses of –73 bar has a considerable mass deficit, (3) the southwestern basin is dominated by the local structure Lamont with a Bouguer maximum of 200 mgal and extremely high lithostatic stresses of 285 bar.The Bouguer minimum of –180 mgal of the Aridaeus area has been modelled by two alternative models: (i) a crustal thickening of 33 km and associated lithostatic stresses of –164 bar, and (ii) a crustal thickening of 20 km plus a low density intrusion. The free air maximum of the Hyginus-Triesnecker area has been fitted by a mantle plug connected with stresses of 116 bar.As the old irregular maria could not sustain large mascon stresses, it has been concluded that the local high stresses of Lamont, Aridaeus, and Hyginus-Triesnecker have been evolved after the impacts of the circular maria. Intrusional activities in these areas could have proceeded to fault zones generated by the large impacts.Contribution No. 211, Institut für Geophysik der Universität Kiel, F.R.G.     

The composition and thickness of the crust of Mars estimated from rare earth elements and neodymium-isotopic compositions of Martian meteorites

Abstract— Isotopic and trace element compositions of Martian meteorites show that early differentiation of Mars produced complementary crustal and mantle reservoirs that were sampled by later magmatic events. This paper describes a mass balance model that estimates the rare earth element (REE) content and thickness of the crust of Mars from the compositions of shergottites. The diverse REE and Nd isotopic compositions of shergottites are most easily explained by variable addition of light rare earth element (LREE)–enriched crust to basaltic magmas derived from LREE-depleted mantle source regions. Antarctic shergottites EET 79001, ALH 77005, LEW 88516, and QUE 94201 all have strongly LREE-depleted patterns and positive initial ¹⁴³Nd isotopic compositions, which is consistent with the generation of these magmas from depleted mantle sources and little or no interaction with enriched crust. In contrast, Shergotty and Zagami have negative initial ¹⁴³Nd isotopic compositions and less pronounced depletions of the LREE, which have been explained by incorporation of enriched crustal components into mantle-derived magmas (Jones, 1989; Longhi, 1991; Borg et al., 1997). The mass balance model presented here derives the REE composition of the crustal component in Shergotty by assuming it represents a mixture between a mantle-derived magma similar in composition to EET 79001A and a LREE-enriched crustal component. The amount of crust in Shergotty is constrained by mixing relations based on Nd-isotopic compositions, which allows the REE pattern of the crustal component to be calculated by mass balance. The effectiveness of this model is demonstrated by the successful recovery of important characteristics of the Earth's continental crust from terrestrial Columbia River basalts. Self-consistent results for Nd-isotopic compositions and REE abundances are obtained if Shergotty contains ～10–30% of LREE-enriched crust with >10 ppm Nd. This crustal component would have moderately enriched LREE (Sm/Nd = 0.25–0.27; ¹⁴⁷Sm/¹⁴⁴Nd = 0.15–0.17; La/Yb = 2.7–3.8), relatively unfractionated heavy rare earth elements (HREE), and no Eu anomaly. Crust with these characteristics can be produced from a primitive lherzolitic Martian mantle by modest amounts (2–8%) of partial melting, and it would have a globally averaged thickness of <45 km, which is consistent with geophysical estimates. Mars may serve as a laboratory to investigate planetary differentiation by extraction of a primary basaltic crust.     

Martian surface and crust: Review and synthesis

Mariner 9 data and earlier data are combined to investigate the nature of the classical markings on Mars. This leads to a model of crustal evolution and structure. Combination of radar and spectrophotometric data strengthens earlier evidence for petrologic distinctions between surface materials in dark and light regions. The classical surface markings are a complex result of three influences: (1) availability of two types of rock material transportable by wind, (2) topographic control of deposition, and (3) prevailing winds producing quasipermanent preferential deposition patterns. The crust, especially in the Tharsis region, bears strong evidence of mantle-induced uplift of a type recognized on Earth as long ago as 1939. Such uplifts have obliterated ancient craters, caused fractures, and graben systems such as the Coprates canyon, and resulted in intense volcanism. This evidence, combined with an apparent bimodal hypsometric diagram, indicates Mars has current or recent mantle activity sufficient to disturb the crust, aid in petrologic differentiation, and cause development of protocontinental units, but insufficient to cause full-fledged continental drift or fold-causing plate collisions as are common on Earth.