Nighttime convection in the interior of a dense Douglas fir forest

Infrared radiative surface temperatures as observed over a dense Douglas fir forest during stable atmospheric conditions are analyzed. It is shown that the concept of a single surface temperature to describe both the thermal coupling and the radiative coupling between atmosphere and forest fails when longwave cooling is large and wind speeds are low. In such cases a decoupling of the radiative surface temperature from the air temperature aloft is observed. Conditions for decoupling are formulated in terms of an appropriate Richardson number. It is shown that a convective surface temperature comes into play that is coupled to the forest interior air temperature. Observed radiative surface temperature is then composed of this convective surface temperature and the aerodynamic surface temperature. Forest interior air temperature during nighttime is, in general, lower than air temperature above the canopy. A simple two-layer canopy model is used to explain this phenomenon in terms of the distribution of atmospheric sensible heat flux and storage heat flux over the two canopy layers.     

A Vegetated Urban Canopy Model for Meteorological and Environmental Modelling

An urban canopy model is developed for use in mesoscale meteorological and environmental modelling. The urban geometry is composed of simple homogeneous buildings characterized by the canyon aspect ratio (h/w) as well as the canyon vegetation characterized by the leaf aspect ratio (σ _l ) and leaf area density profile. Five energy exchanging surfaces (roof, wall, road, leaf, soil) are considered in the model, and energy conservation relations are applied to each component. In addition, the temperature and specific humidity of canopy air are predicted without the assumption of thermal equilibrium. For radiative transfer within the canyon, multiple reflections for shortwave radiation and one reflection for longwave radiation are considered, while the shadowing and absorption of radiation due to the canyon vegetation are computed by using the transmissivity and the leaf area density profile function. The model is evaluated using field measurements in Vancouver, British Columbia and Marseille, France. Results show that the model quite well simulates the observations of surface temperatures, canopy air temperature and specific humidity, momentum flux, net radiation, and energy partitioning into turbulent fluxes and storage heat flux. Sensitivity tests show that the canyon vegetation has a large influence not only on surface temperatures but also on the partitioning of sensible and latent heat fluxes. In addition, the surface energy balance can be affected by soil moisture content and leaf area index as well as the fraction of vegetation. These results suggest that a proper parameterization of the canyon vegetation is prerequisite for urban modelling.     

Simultaneous determinations of the sensible and latent heat transfer coefficients for tree leaves

The heat and mass transfer coefficients for exchange across the fluid dynamic boundary layer over tree leaves were simultaneously determined in a controlled environment chamber. The mass transfer coefficients were calculated from measured values of evaporation, air specific humidity and a value of leaf specific humidity at leaf temperature. The heat transfer coefficients were calculated from measured values of air temperature, leaf temperature and an estimate of the sensible heat flux density calculated as the measured net radiation at the leaf surfaces minus the latent heat flux density. The experiments described in this paper indicate that the equations based on laminar boundary-layer theory can give reasonable estimates of the transfer coefficients of real tree leaves for the velocities most commonly experienced in plant canopies, if they are adjusted by a constant multiplier greater than one. Calculations of local mass transfer coefficients based on temperature measurements at three locations at different distances from the leading edge of the leaves, indicate that the deviation from theory is probably the result of transition to turbulent boundary-layer flow at some distance from the leading edge.     

Utility of Radiometric–aerodynamic Temperature Relations for Heat Flux Estimation

In many land-surface models using bulk transfer (one-source) approaches, the application of radiometric surface temperature observations in energy flux computations has given mixed results. This is due in part to the non-unique relationship between the so-called aerodynamic temperature, which relates to the efficiency of heat exchange between the land surface and overlying atmosphere, and a surface temperature measurement from a thermal-infrared radiometer, which largely corresponds to a weighted soil and canopy temperature as a function of radiometer viewing angle. A number of studies over the past several years using multi-source canopy models and/or experimental data have developed simplified methods to accommodate radiometric–aerodynamic temperature differences in one-source approaches. A recent investigation related the variability in the radiometric–aerodynamic relation to solar radiation using experimental data from a variety of landscapes, while another used a multi-source canopy model combined with measurements over a wide range in vegetation density to derive a relationship based on leaf area index. In this study, simulations by a detailed multi-source soil–plant–environment model, Cupid, which considers both radiative and turbulent exchanges across the soil–canopy–air interface, are used to explore the radiometric–aerodynamic temperature relations for a semi-arid shrubland ecosystem under a range of leaf area/canopy cover, soil moisture and meteorological conditions. The simulated radiometric-aerodynamic temperatures indicate that, while solar radiation and leaf area both strongly affect the magnitude of this temperature difference, the relationships are non-unique, having significant variability depending on local conditions. These simulations also show that soil–canopy temperature differences are highly correlated with variations in the radiometric–aerodynamic temperature differences, with the slope being primarily a function of leaf area. This result suggests that two-source schemes with reliable estimates of component soil and canopy temperatures and associated resistances may be better able to accommodate variability in the radiometric–aerodynamic relation for a wider range in vegetated canopy cover conditions than is possible with one-source schemes. However, comparisons of sensible heat flux estimates with Cupid using a simplified two-source model and a one-source model accommodating variability in the radiometric-aerodynamic relation based on vegetation density gave similar scatter. On the other hand, with experimental data from the shrubland site, the two-source model generally outperformed the one-source scheme. Clearly, vegetation density/leaf area has a major effect on the radiometric–aerodynamic temperature relation and must be considered in either one-source or two-source formulations. Hence these adjusted one-source models require similar inputs as in two-source approaches, but provide as output only bulk heat fluxes; this is not as useful for monitoring vegetation conditions.     

Infrared measurement of canopy temperature and detection of plant water stress

Summary Leaf temperature is directly determined by leaf energy and water balance. If diminished water availability decreases latent heat flux at the leaf surface, a complementary increase of sensible heat will occur and create a larger temperature difference between foliage and air. Radiation, air temperature, humidity and wind speed modify leaf temperature and may mask indications of water stress. The position, inclination and orientation of leaves within the canopy also produce considerable variation of leaf temperature. These factors were incorporated in a linear transpiration model, using physical and physiological characteristics of cotton. Water stress was simulated by imposing a limit value for stomatal conductance. The energy balance equation was solved as a function of angle between leaf and solar beam, to determine leaf temperature frequency distribution. The results show that stress induced temperature rise occurs over a small percentage of the total leaf area. Detection of moderate stress requires a normalizing procedure which takes into account meteorological conditions. The leaf temperature distribution is a better indicator of stress than the average value.The infrared thermometer integrates thermal radiation emitted by the foliage included in its field of view. The model simulated the temperature composition of the field of view as a function of sighting angle and orientation relative to the incident solar beam. The spatial averaging of the signal in the field of view, attenuated the sensitivity of the measurement to water stress. The results also indicated that pointing the infrared thermometer towards the canopy in the same direction as the sun, and at an angle of incidence as close as possible to the solar zenith angle, improved the ability to detect water stress.Contribution from the Agricultural Research Organization, The Volcani Center, Bet Dagan, Israel. No. 2638-E, 1989 series. This work was supported by grant No. US-1138-86 from the Binational Agricultural Research and Development Fund.With 9 Figures     

Further Development of the Vegetated Urban Canopy Model Including a Grass-Covered Surface Parametrization and Photosynthesis Effects

The vegetated urban canopy model (VUCM), which includes parametrizations of urban physical processes for artificial surfaces and vegetated areas in an integrated system, has been further developed by including physical processes associated with grass-covered surfaces in urban pervious surfaces and the photosynthesis effects of urban vegetation. Using measurements made from three urban/suburban sites during the BUBBLE field campaign in 2002, the model’s performance in modelling surface fluxes (momentum flux, net radiation, sensible and latent heat fluxes and storage heat flux) and canopy air conditions (canopy air temperature and specific humidity) was critically evaluated for the non-precipitation and the precipitation days. The observed surface fluxes at the urban/suburban sites were significantly altered by precipitation as well as urban vegetation. Especially, the storage heat at urban surfaces and underlying substrates varied drastically depending on weather conditions while having an important role in the formation of a nocturnal urban surface layer. Unlike the nighttime canopy air temperature that was largely affected by the storage-heat release, the daytime canopy air conditions were highly influenced by the vertical turbulent exchange with the overlying atmosphere. The VUCM well reproduced these observed features in surface fluxes and canopy air conditions at all sites while performing well for both the non-precipitation and the precipitation days. The newly implemented parametrizations clearly improved the model’s performance in the simulation of sensible and latent heat fluxes at the sites, more noticeably at the suburban site where the vegetated area fraction is the largest among the sites. Sensitivity analyses for model input parameters in VUCM elucidated the relative importance of the morphological, aerodynamic, hydrological and radiative/thermal properties in modelling urban surface fluxes and canopy air conditions for daytime and nighttime periods. These results suggest that the VUCM has great potential for urban atmospheric numerical modelling for a range of cities and weather conditions in addition to having a better physical basis in the representation of urban vegetated areas and associated physical processes.     

Leaf temperature measurement techniques

Three types of thermocouple sensing elements were used to measure potato leaf temperatures in the uppermost layer of the canopy. A comparison between thermocouple hypodermic needles inserted into the midrib of the potato leaf and thermocouple clips fastened on its surface gave near-identical temperature readings. Miniature screens housing thermocouple sensors exposed at the upper canopy level and measuring ambient air temperatures showed excellent agreement (r = 0.996, N = 68) with potato leaf temperatures. This was not the case for temperatures recorded at the standard meteorological screen 2 m above the ground. It is therefore suggested that for micrometeorological measurements, where accuracy of crop temperature values is biologically significant, accurate information can be obtained with such miniature screens.     

Interpretation of Crown Radiation Temperatures of a Dense Douglas fir Forest with Similarity Theory

Infrared crown radiation temperatures as observed over a dense Douglas fir forest are analyzed in the context of similarity theory and the concept of transport resistances. As such we obtain a rather high value of the roughness length for heat, which is about equal to the roughness length for momentum. This value can be explained by the more efficient transport of heat relative to momentum in the roughness sublayer of the forest. Correcting for this effect we arrive at the classic value for homogeneous terrain of about 0.1 times the roughness length for momentum. For unstable cases the presence of enhanced mixing of heat in the roughness sublayer leads to a modified integral stability function for the dimensionless potential temperature difference between the surface and the top of the roughness sublayer. The observations give some evidence for this different stability behaviour. The analysis suggests that during daytime the radiative surface temperature and the aerodynamic surface temperature are not significantly different when used to estimate fluxes. Daytime trunk space air temperature is satisfactory parameterized with the concept of gusts and with surface renewal analysis. As such it is related to the sensible heat flux and the storage heat flux. Night time radiation temperatures at times strongly deviate from the expected behaviour based on similarity theory and the roughness length for heat, suggesting that the concept of a single surface temperature is too simple for such cases.     

应用城市冠层模式研究建筑物形态对城市边界层的影响

文中将城市冠层模式耦合到南京大学城市尺度边界层模式中,通过模拟对比发现,耦合模式对城市地区气温模拟结果更接近于观测值,尤其是对城市地区夜间气温模拟的改进.运用改进耦合模式通过多个敏感性试验的模拟,从城市面积扩张、建筑物高度增加、建筑物分布密度变化等角度研究城市建筑物三维几何形态变化对城市边界层及城市气象环境的影响,试验结果表明:(1)城市面积扩张使得城市下垫面的热通量增大,热力湍流活动增强,动量通量输送增强,城市湍能增大,湍流扩散系数变大,城市气温升高,且对不同时刻城市区域大气层结稳定度均有不同程度的影响.(2)建筑物高度增加增大了城市下垫面的粗糙度和零平面位移.同时也增大了城市街渠高宽比.城市建筑物越高,白天城市地区地表热通量越小,城市上空大气温度越低,平均风速减小,湍能减小;夜间由于高大建筑物释放储热比低矮建筑物要多,其热力湍流相对活跃,地表热通量增大,使得城市区域气温较高.(3)建筑物密度增大,会减小城市下垫面的粗糙度同时增强街渠对辐射的影响.建筑物密度增大在白天会减小地表热通量和动量通量,使城市气温降低,平均风速增大,城市湍流活动能力减弱;夜间城市释放较多储热使得气温较高.     

Study on Effects of Building Morphology on Urban Boundary Layer Using an Urban Canopy Model

An urban canopy model is incorporated into the Nanjing University Regional Boundary Layer Model. Temperature simulated by the urban canopy model is in better agreement with the observation, especially in the night time, than that simulated by the traditional slab model. The coupled model is used to study the effects of building morphology on urban boundary layer and meteorological environment by changing urban area, building height, and building density.It is found that when the urban area is expanded, the urban boundary layer heat flux, thermal turbulence, and the turbulent momentum flux and kinetic energy all increase or enhance, causing the surface air temperature to rise up. The stability of urban atmospheric stratification is affected to different extent at different times of the day.When the building height goes up, the aerodynamic roughness height, zero plane displacement height of urban area, and ratio of building height to street width all increase. Therefore, the increase in building height results in the decrease of the surface heat flux, urban surface temperature, mean wind speed, and turbulent kinetic energy in daytime. While at night, as more heat storage is released by higher buildings, thermal turbulence is more active and surface heat flux increases, leading to a higher urban temperature.As the building density increases, the aerodynamic roughness height of urban area decreases, and the effect of urban canopy on radiation strengthens. The increase of building density results in the decrease in urban surface heat flux, momentum flux, and air temperature, the increase in mean wind speed, and the weakening of turbulence in the daytime. While at night, the urban temperature increases due to the release of more heat storage.     

Ambient biogenic hydrocarbons and isoprene emissions from a mixed deciduous forest

Experiments were conducted during the growing season of 1993 at a mixed deciduous forest in southern Ontario, Canada to investigate the atmospheric abundance of hydrocarbons from phytogenic origins, and to measure emission rates from foliage of deciduous trees. The most abundant phytogenic chemical species found in the ambient air were isoprene and the monoterpenes -pinene and -pinene. Prior to leaf-bud break during spring, ambient hydrocarbon mixing ratios above the forest remained barely above instrument detection limit (20 parts per trillion), but they became abundant during the latter part of the growing season. Peak isoprene mixing ratios reached nearly 10 parts per billion (ppbv) during mid-growing season while maximum monoterpene mixing ratios were close to 2 ppbv. Both isoprene and monoterpene mixing ratios exhibited marked diurnal variations. Typical isoprene mixing ratios were highest during mid-afternoon and were lowest during nighttime. Peak isoprene mixing ratios coincided with maximum canopy temperature. The diurnal pattern of ambient isoprene mixing ratio was closely linked to the local emissions from foliage. Isoprene emission rates from foliage were measured by enclosing branches of trees inside environment-controlled cuvette systems and measuring the gas mixing ratio difference between cuvette inlet and outlet airstream. Isoprene emissions depended on tree species, foliage ontogeny, and environmental factors such as foliage temperature and intercepted photosynthetically active radiation (PAR). For instance, young (<1 month old) aspen leaves released approximately 80 times less isoprene than mature (>3 months old) leaves. During the latter part of the growing season the amount of carbon released back to the atmosphere as isoprene by big-tooth and trembling aspen leaves accounted for approximately 2% of the photosynthetically fixed carbon. Significant isoprene mixing ratio gradients existed between the forest crown and at twice canopy height above the ground. The gradient diffusion approach coupled with similarity theory was used to estimate canopy isoprene flux densities. These canopy fluxes compared favorably with values obtained from a multilayered canopy model that utilized locally measured plant microclimate, biomass distribution and leaf isoprene emission rate data. Modeled isoprene fluxes were approximately 30% higher compared to measured fluxes. Further comparisons between measured and modeled canopy biogenic hydrocarbon flux densities are required to assess uncertainties in modeling systems that provide inventories of biogenic hydrocarbons.     

Surface energy budget dynamics of short-rotation willow forest

Summary Knowledge of how energy budget components vary with time, vegetation type and stage of development and field size is important if we are to increase our understanding of the energy budget on a regional scale. The aim of this study was to quantify the seasonal and diurnal variation of energy budget components of a 2.6 ha short-rotation stand. Measurements were made using a thermometer interchange system for gradient and Bowen ratio estimations. Energy storage in soil, air and biomass was determined from temperature and humidity measurements. The partitioning of available energy between sensible and latent heat fluxes changed drastically at the beginning of the season. From the first half of May until the second half of June the maximum (noon) latent heat flux increased by a factor of 3, the total storage decreased by a factor of 2 and the sensible heat flux decreased by a factor of 4.5, while net radiation was unchanged. The vapour pressure deficit was similar during these periods but the leaf area index increased from about zero to three. On a mean monthly basis, the sensible heat flux was negative (directed towards the surface) from June to October, i.e., during most of the season. Heat was supplied to the atmosphere only at the beginning of the season for this type of short-rotation stand. Heat storage in air and biomass was significant on an hourly basis, especially in mornings and evenings when it could be of the same order as the net radiation. It was concluded that the development stage of the short-rotation stand had a large influence on how the energy was distributed between the convective fluxes. It was also concluded that storage in air and biomass had to be accounted for if precise estimates of energy balance on a shorter (hourly) time scale were required.With 5 Figures     

Precipitation projections under GCMs perspective and Turkish Water Foundation (TWF) statistical downscaling model procedures

Insect outbreaks are major disturbances that affect a land area similar to that of forest fires across North America. The recent mountain pine bark beetle (D endroctonus ponderosae) outbreak and its associated blue stain fungi (Grosmannia clavigera) are impacting water partitioning processes of forests in the Rocky Mountain region as the spatially heterogeneous disturbance spreads across the landscape. Water cycling may dramatically change due to increasing spatial heterogeneity from uneven mortality. Water and energy storage within trees and soils may also decrease, due to hydraulic failure and mortality caused by blue stain fungi followed by shifts in the water budget. This forest disturbance was unique in comparison to fire or timber harvesting because water fluxes were altered before significant structural change occurred to the canopy. We investigated the impacts of bark beetles on lodgepole pine (Pinus contorta) stand and ecosystem level hydrologic processes and the resulting vertical and horizontal spatial variability in energy storage. Bark beetle-impacted stands had on average 57 % higher soil moisture, 1.5 °C higher soil temperature, and 0.8 °C higher tree bole temperature over four growing seasons compared to unimpacted stands. Seasonal latent heat flux was highly correlated with soil moisture. Thus, high mortality levels led to an increase in ecosystem level Bowen ratio as sensible heat fluxes increased yearly and latent heat fluxes varied with soil moisture levels. Decline in canopy biomass (leaf, stem, and branch) was not seen, but ground-to-atmosphere longwave radiation flux increased, as the ground surface was a larger component of the longwave radiation. Variability in soil, latent, and sensible heat flux and radiation measurements increased during the disturbance. Accounting for stand level variability in water and energy fluxes will provide a method to quantify potential drivers of ecosystem processes and services as well as lead to greater confidence in measurements for all dynamic disturbances.     

An annual cycle of vegetation in a GCM. Part II: global impacts on climate and hydrology

The Met Office Hadley Centre Unified Model (HadAM3) with the tiled version of the Met Office Surface Exchange Scheme (MOSES2) land surface scheme is used to assess the impact of a comprehensive imposed vegetation annual cycle on global climate and hydrology. Two 25-year numerical experiments are completed: the first with structural vegetation characteristics (Leaf Area Index, LAI, canopy height, canopy water capacity, canopy heat capacity, albedo) held at annual mean values, the second with realistic seasonally varying vegetation characteristics. It is found that the seasonalities of latent heat flux and surface temperature are widely affected. The difference in latent heat flux between experiments is proportional to the difference in LAI. Summer growing season surface temperatures are between 1 and 4 K lower in the phenology experiment over a majority of grid points with a significant vegetation annual cycle. During winter, midlatitude surface temperatures are also cooler due to brighter surface albedo over low LAI surfaces whereas during the dry season in the tropics, characterized by dormant vegetation, surface temperatures are slightly warmer due to reduced transpiration. Precipitation is not as systematically affected as surface temperature by a vegetation annual cycle, but enhanced growing season precipitation rates are seen in regions where the latent heat flux (evaporation) difference is large. Differences between experiments in evapotranspiration, soil moisture storage, the timing of soil thaw, and canopy interception generate regional perturbations to surface and sub-surface runoff annual cycles in the model.     

Relationship of surface heat flux to microscale temperature variations: Application to boreas

The surface heat flux is normally parameterized in terms of the difference between the air temperature and the surface radiative temperature, or equivalently, the temperature computed from the surface energy balance. In this note, the relationship between the heat flux and the air-surface temperature difference is shown to be sensitive to the microscale variability of the surface radiation temperature caused by differences between the well-ventilated tree tops and less ventilated ground surface. This conclusion is based on surface and aircraft data collected during the Boreal Ecosystem-Atmosphere Study (BOREAS). For this case, the heat flux cannot be predicted by adjusting the thermal roughness height. As an alternative, the aerodynamic temperature can be related to a weighted average of the surface radtation temperature analogous to application of a simple canopy model. Here, the total heat flux is the sum of the heat fluxes from each individual surface type weighted by the area-fractional coverage.Part of this work was carried out in the Dept. of Earth and Atmospheric Sciences, St. Louis University and the Mesoscale and Microscale Meteorology Division of the National Center for Atmospheric Research.Part of this work was carried out in the Mesoscale and Microscale Meteorology Division of the National Center for Atmospheric Research.     

Urban heat island diagnosis using ASTER satellite images and ‘in situ’ air temperature

This study demonstrates that thermal satellite images combined with ‘in situ’ ground data can be used to examine models of heat island genesis and thus identify the main causes of urban heat islands (UHIs). The models, although proposed over 30 years ago, have not been thoroughly evaluated due to a combination of inadequate ground data and the low resolution of thermal satellite data. Also there has been limited understanding of the relevance of satellite-derived surface temperatures to local and regional scale air temperatures. A cloud-free ASTER thermal image of urban and rural areas of Hong Kong was obtained on a winter night with a well-developed heat island, accompanied by a 148 km vehicle traverse of air temperatures. Over the whole traverse a high R² of 0.80 was observed between surface and air temperatures, with the two datasets showing a similar amplitude and general trend, but with the surface exhibiting much higher local variability than air temperature. Gradients in both surface and air temperature could be related to differences in land cover, with little evidence of large scale advection, thus supporting the population/physical structure model of UHI causation, rather than the advection model. However, the much higher surface and air temperatures observed over the largest urban area, Kowloon, than over any smaller urban centre with similar physical structure in the New Territories, would seem more indicative of the advection model. The image and ground data suggest that Kowloon's urban canopy layer climate is mainly influenced by local city structure, but it is also modified by a strongly developed, regional scale urban boundary layer which has developed over the largest urban centre of Kowloon, and reinforces heating from both above and below.     

Modelling the Effect of Tree Foliage on Sprayer Airflow in Orchards

The effect of tree foliage on sprayer airflow through pear trees in a fruit orchard was studied and modelled in detail. A new three-dimensional (3-D) computational fluid dynamics model that integrates the 3-D canopy architecture with a local closure model to simulate the effect of the stem and branches and leaves of trees separately on airflow was developed. The model was validated with field observations made in an experimental orchard (pcfruit, Sint-Truiden, Belgium) in spring and summer 2008 and was used to investigate the airflow from three air-assisted orchard sprayers (Condor V, Duoprop and AirJet quatt). Velocity magnitudes were measured before and behind leafless and fully-leafed pear canopies across the row while the operating sprayers are passing along the row, and were compared with the simulations. The simulation results predicted the measured values well with all the local relative errors within 20%. The effect of foliar density on airflow from the three air assisted sprayers was manifested by changing the magnitude and direction of the sprayers’ air velocity behind the canopy, especially at the denser regions of the canopy and by changing the pattern of velocity decay horizontally along the jet. The developed methodology will also allow a thorough investigation of atmospheric airflow in canopy structures.     

阿尔卑斯山杉林冠层影响辐射传输的个例分析

利用瑞士Alptal观测站杉树林冠层上方、下方的辐射观测资料,分析了冠层对短波辐射的减弱及对长波辐射的增幅作用及其季节变化。结果表明,对比较密集的常绿针叶林,冠层对入射短波辐射的透过率随着太阳高度的降低而减小,春季以后趋于稳定;冠层对长波辐射的增幅作用随天气状况而变化,这种增幅作用在晴空条件下最显著,可达1.5倍。在冬季,因为太阳辐射较弱,冠层对长波辐射的增幅作用超过对短波辐射的减弱从而增加地面净辐射。在其它季节,太阳辐射比较强,冠层对短波辐射的减弱超过对长波辐射的增幅作用而减少地面净辐射。地面净辐射与冠层上方气温的变化趋势虽然在有些时段一致,但在伴随降雪过程的降温时段,地面净辐射与气温的变化趋势近乎反相,在积雪融化时段,地面净辐射的增加比气温升高更显著,尤其是在白天。     

春秋季节侧柏-山毛桃群落演替初期的小气候特征

开展森林小气候研究,对于协调生物与环境的关系、保护生物多样性以及实现森林的可持续高效管理,都是十分重要的。选择5月和10月典型的晴朗无风天气条件,以侧柏纯林为对照,研究了郁闭度为0.25、0.54和0.87的侧柏-山毛桃群落演替初期小气候特征。结果表明,侧柏-山毛桃混交林对春季和秋季林内空气温度的早间增温效应和午间降温效应,随着郁闭度增加而增大。春季的高温峰值出现在15时,晚于秋季的高温峰值13时。春季和秋季林内10 cm处地温日间呈持续增加趋势,春季以郁闭度为0.25的B点为最高,秋季侧柏纯林在12时前为最低,14时后为最高。春季林内空气相对湿度从07时到11时呈快速降低的趋势,然后逐渐缓慢回升;而秋季林内的相对湿度,随着郁闭度的增加而增大,但日间变化幅度比较小。无论春季还是秋季,侧柏和山毛桃的叶片温度日间变化均呈先升高后缓慢降低的趋势。春季郁闭度对侧柏和山毛桃的叶片温度影响不显著,但秋季11-15时,随着郁闭度的增加,叶片温度有降低的趋势。在太行山区,以山毛桃为保护树种,快速提高侧柏-山毛桃混交林的郁闭度,对有效地改善林内小气候,促进森林更新和管理都是十分重要的。     

Application of transilient turbulent theory to study interactions between the atmospheric boundary layer and forest canopies

The new Forest-Land-Atmosphere ModEl called FLAME is presented. The first-order, nonlocal turbulence closure called transilient turbulence theory (Stull, 1993) is applied to study the interactions between a forested land-surface and the atmospheric boundary layer (ABL). The transilient scheme is used for unequal vertical grid spacing and includes the effects of drag, wake turbulence, and interference to vertical mixing by plant elements. Radiation transfer within the vegetation and the equations for the energy balance at the leaf surface have been taken from Norman (1979). Among others, the model predicts profiles of air temperature, humidity and wind velocity within the ABL, sensible and latent heat fluxes from the soil and the vegetation, the stomata and aerodynamic resistances, as well as profiles of temperature and water content in the soil. Preliminary studies carried out for a cloud free day and idealized initial conditions are presented. The canopy height is 30 m within a vertical domain of 3 km. The model is able to capture some of the effects usually observed within and above forested areas, including the relative wind speed maximum in the trunk space and the counter gradient-fluxes in the lower part of the plant stand. Of special interest is the determination of the location and magnitude of the turbulent mixing between model layers, which permits one to identify the effects of large eddies transporting momentum and scalar quantities into the canopy. A comparison between model simulations and field measurements will be presented in a future paper.