激光剥蚀-等离子体质谱技术及其在地球化学宇宙化学和环境研究中的应用

激光剥蚀-等离子体质谱(LA-ICPMS)已成为地球化学、宇宙化学和环境研究领域元素和同位素原位分析最重要的技术之一。文章介绍了多种类型的质谱仪及其使用的激光器。用途最广的LA-ICPMS仪器之一是单接收器扇形磁场质谱仪,配有Nd:YAG激光剥蚀系统(激光波长分为193 nm和213 nm两种),MPI Mainz实验室使用的就是这套系统,文章对此作一详细介绍。文中阐述了数据优化技术及其多种校正过程;介绍LA-ICPMS在痕量元素和同位素分析领域的一些应用,包括参考物质的研制,Hawaiian玄武岩、Martian陨石、生物骨针和珊瑚虫中痕量元素分析及熔融包裹体和富钙-铝碳质球粒陨石中的铅和锶同位素测量。     

Laser Ablation ICP-MS Developments and Trends for 2003

This annual review of laser-ablation inductively coupled plasma-mass spectrometry (LA-ICP-MS) covers the year 2003. Significant advances were made in understanding laser-sample interactions. In particular, research defined the distribution of particle sizes produced by the interplay of laser wavelength, laser pulse width and the gas environment of ablation. A link between particle sizes and elemental and isotopic fractionation at both the ablation site and in the ICP was established. Experimental 15 7 nm and femtosecond laser systems were tested with promising results. The number of applications of LA-ICP-MS in geology and environmental Earth science continued to grow with particular interest in element concentration and isotope ratio profiling of materials, linking composition to time scales. In situ isotopic ratio measurements were increasingly made using multicollector magnetic sector ICP-MS instruments. Other applications of wide interest included bulk sampling of rocks and ores prepared as lithium borate glasses; low level analysis of platinum-group elements, rhenium and gold in sulfides, metal and silicates; in situ uranium-lead zircon geochronology; and melt and fluid inclusion analysis.     

Assessment of Nanosecond Laser Ablation Multi‐Collector Inductively Coupled Plasma‐Mass Spectrometry for Pb and Sr Isotopic Determination in Archaeological Glass: Mass Bias Correction Strategies and Results for Corning Glass Reference Materials

This work presents an evaluation of various methods for in situ high‐precision Sr and Pb isotopic determination in archaeological glass (containing 100–500 μg g^?1 target element) by nanosecond laser ablation multi‐collector‐inductively coupled plasma‐mass spectrometry (ns‐LA‐MC‐ICP‐MS). A set of four soda‐lime silicate glasses, Corning A–D, mimicking the composition of archaeological glass and produced by the Corning Museum of Glass (Corning, New York, USA), were investigated as candidates for matrix‐matched reference materials for use in the analysis of archaeological glass. Common geological reference materials with known isotopic compositions (USGS basalt glasses BHVO‐2G, GSE‐1G and NKT‐1G, soda‐lime silicate glass NIST SRM 610 and several archaeological glass samples with known Sr isotopic composition) were used to evaluate the ns‐LA‐MC‐ICP‐MS analytical procedures. When available, ns‐LA‐MC‐ICP‐MS results for the Corning glasses are reported. These were found to be in good agreement with results obtained via pneumatic nebulisation (pn) MC‐ICP‐MS after digestion of the glass matrix and target element isolation. The presence of potential spectral interference from doubly charged rare earth element (REE) ions affecting Sr isotopic determination was investigated by admixing Er and Yb aerosols by means of pneumatic nebulisation into the gas flow from the laser ablation system. It was shown that doubly charged REE ions affect the Sr isotope ratios, but that this could be circumvented by operating the instrument at higher mass resolution. Multiple strategies to correct for instrumental mass discrimination in ns‐LA‐MC‐ICP‐MS and the effects of relevant interferences were evaluated. Application of common glass reference materials with basaltic matrices for correction of ns‐LA‐MC‐ICP‐MS isotope data of archaeological glasses results in inaccurate Pb isotope ratios, rendering application of matrix‐matched reference materials indispensable. Correction for instrumental mass discrimination using the exponential law, with the application of Tl as an internal isotopic standard element introduced by pneumatic nebulisation and Corning D as bracketing isotopic calibrator, provided the most accurate results for Pb isotope ratio measurements in archaeological glass. Mass bias correction relying on the power law, combined with intra‐element internal correction, assuming a constant ⁸⁸Sr/⁸⁶Sr ratio, yielded the most accurate results for ⁸⁷Sr/⁸⁶Sr determination in archaeological glasses     

Precise and Accurate In Situ Determination of Lead Isotope Ratios in NIST,USGS, MPI‐DING and CGSG Glass Reference Materials using Femtosecond Laser Ablation MC‐ICP‐MS

Lead isotope ratio data were obtained with good precision and accuracy using a 266 nm femtosecond laser ablation (fLA) system connected to a multi‐collector ICP‐MS (MC‐ICP‐MS) and through careful control of analytical procedures. The mass fractionation coefficient induced by 266 nm femtosecond laser ablation was approximately 28% lower than that by 193 nm excimer laser ablation (eLA) with helium carrier gas. The exponential law correction method for Tl normalisation with optimum adjusted Tl ratio was utilised to obtain Pb isotopic data with good precision and accuracy. The Pb isotopic ratios of the glass reference materials NIST SRM 610, 612, 614; USGS BHVO‐2G, BCR‐2G, GSD‐1G, BIR‐1G; and MPI‐DING GOR132‐G, KL2‐G, T1‐G, StHs60/80‐G, ATHO‐G and ML3B‐G were determined using fLA‐MC‐ICP‐MS. The measured Pb isotopic ratios were in good agreement with the reference or published values within 2s measurement uncertainties. We also present the first high‐precision Pb isotopic data for GSE‐1G, GSC‐1G, GSA‐1G and CGSG‐1, CGSG‐2, CGSG‐4 and CGSG‐5 glass reference materials obtained using the femtosecond laser ablation MC‐ICP‐MS analysis technique.     

湖南黄沙坪多金属矿床成矿斑岩锆石U-Pb年代学及Hf同位素制约

湖南黄沙坪铅锌钨钼多金属矿床位于南岭花岗岩带中段的北缘,是区内的典型矿床之一.该矿床与成矿关系密切的岩体为花岗斑岩、花斑岩和石英斑岩.LA-ICP-MS锆石U-Pb年代学显示,花岗斑岩的成岩年龄为(150.1±0.4) Ma,花斑岩的年龄为(150.2±0.4) Ma,石英斑岩的年龄为(155.3±0.7) Ma,表明岩体形成于晚侏罗世.锆石原位Hf同位素数据分析结果表明,含矿斑岩可能来源于中元古代古老基底的重熔,其中石英斑岩主要来源于地壳,花岗斑岩与花斑岩的形成伴有少量地幔物质的加入,是壳幔相互作用的产物.另外,由于花岗斑岩与花斑岩成岩年龄相近,Hf同位素组成相似,进一步印证了花斑岩和花岗斑岩是同源同期岩浆的产物.结合该矿床所处的区域大地构造背景以及成矿年龄,认为该矿床形成的动力学机制主要为中-晚侏罗世活动的Farallon-Izanagi洋岭和转换断层俯冲,导致华南内陆岩石圈全面伸展-减薄-地幔物质上涌,从而使得地壳物质部分熔融.     

南秦岭柞水—山阳矿集区夏家店金矿床黄铁矿微量元素和氢、氧、硫同位素对矿床成因的制约

为了研究柞水—山阳矿集区夏家店金矿床成因,采用LA-ICP-MS和LA-MC-ICP-MS技术分析夏家店金矿床矿体及围岩样品中黄铁矿原位微量元素及氢、氧、硫同位素组成特征。结果表明,该矿床黄铁矿的Co/Ni 比值为0.11~0.76,说明其与沉积作用有关。矿石中黄铁矿的δ³⁴S值(-9.40‰~7.16‰)与围岩碳质板岩的δ³⁴S值(-8.84‰~10.64‰)接近,黄铁矿的δ³⁴S均值(2.47‰)基本落在岩浆硫的范围内,指示矿石硫可能由地层硫和岩浆硫混合而成。氢、氧同位素测试结果表明,夏家店矿床成矿流体可能主要来自岩浆水,成矿后期有大气降水的加入。综合矿床地质特征、成矿温度、金赋存状态等特征和黄铁矿微量元素、硫同位素组成可知,夏家店金矿床属于卡林型金矿,其成矿流体主要来自岩浆水,成矿后期有大气降水加入;其成矿物质是由深部岩浆与地层混合而成。     

LA‐(MC)‐ICP‐MS Trends in 2006 and 2007 with Particular Emphasis on Measurement Uncertainties

Research in 2006 and 2007 dealing with laser ablation‐(multicollector)‐inductively coupled plasma‐mass spectrometry, LA‐(MC)‐ICP‐MS, involved studies concerned with optimising the technique itself, as well as applying the method to a variety of problems in the Earth sciences. The causes of elemental and isotopic fractionation produced during laser ablation continues to be of considerable interest, with evidence mounting that processes occurring both at the ablation site and in the argon plasma of the ICP are culpable. There is growing excitement in the use of femtosecond lasers for LA‐(MC)‐ICP‐MS, with the hope that they reduce or eliminate melting and non‐congruent volatilisation at the ablation site and thus approach stoichiometric sampling. Ablation chamber design emerged as a serious concern, particularly with respect to achieving the rapid washout needed for fine‐scale compositional mapping of geological objects. LA‐MC‐ICP‐MS provided data for a wide range of isotopic systems, especially hafnium, but also B, S, Mg, Cu, Fe, Sr, Nd, Pb and U. Measurement uncertainties in LA‐ICP‐MS were discussed by several researchers, and are critically reviewed here ‐ total uncertainties for trace element concentration measurements of silicates including errors on the calibration values of common reference materials are ～10% (95% confidence limits), though the precision of individual spot measurements (50 to 100 μm) is much better, ～1% RSD, using a 193 nm laser and a sector field‐ICP‐MS. LA‐ICP‐MS U‐Pb ages for zircon and other U‐rich accessory phases are claimed by most geoanalysts to have 2s uncertainties of ～0.7 and 1.3% respectively but the actual accuracy of the method is probably only as good as ～2% (2s), when uncertainties associated with laser‐induced Pb/U fractionation are included.     

微区原位普通铅同位素分析技术及其地质应用进展

应用激光剥蚀-多接收器电感耦合等离子体质谱(LA-MC-ICP-MS)和二次离子质谱(SIMS)等分析技术进行微区原位普通Pb同位素分析是微区地球化学研究的重要内容之一.综述了矿物、熔体包裹体和沉积结核的微区原位普通Pb同位素分析技术及其地质应用的新进展.这些研究资料表明该分析技术在岩浆岩成因、沉积物物源示踪、地幔地球化学、古海洋学以及矿床学等的研究中提供了常规的全岩Pb同位素分析方法难以获得的重要信息,充分展示了该分析技术在地球科学研究中的应用前景.     

桂东大瑶山南缘社山花岗闪长岩的锆石U-Pb年龄及Hf同位素特征: 对区内加里东期成岩成矿作用的制约

利用激光剥蚀(MC)-ICP-MS方法对桂东大瑶山南缘的社垌钨钼矿床中的花岗岩类进行研究, 精确限定社山黑云母花岗闪长岩(SD256)中锆石的206Pb/238U加权平均年龄为438.7±3.0 Ma(MSWD=0.22), 侵位于平头背石英砂岩的花岗闪长(斑)岩脉(SD190)形成于438.1±2.6 Ma(MSWD=0.28);花岗岩中新生岩浆锆石的Hf同位素特征较为一致, 176Hf/177Hf比值分布于0.282 406~0.282 518, 对应的ε_Hf(438 Ma)值变化于-3.7~0, 两阶段Hf模式年龄(T_DM2)集中在1 226~1 417 Ma之间.这表明大瑶山地区社山花岗闪长岩类的形成时间在438 Ma左右(加里东期), 成岩成矿作用可能与中元古代新生地壳物质(1.2~1.4 Ga)的部分熔融密切相关.结合区域内已有可靠年龄进行分析, 认为华南加里东期成岩成矿作用应该不是呈简单的北东向分布, 而是呈面状展布, 且该期构造-岩浆-成矿运动可能是引起华南地区在印支期、燕山早期发生大规模的岩浆作用和金属成矿作用的关键原因之一.      

GGR Biennial Review: Advances in Laser Ablation and Solution ICP-MS from 2008 to 2009 with Particular Emphasis on Sensitivity Enhancements,Mitigation of Fractionation Effects and Exploration of New Applications

Recent developments from 2008 to 2009 in ICP-MS engineering, methods and applications are reviewed here. Of particular emphasis are advances in: (a) maximising sensitivity and reducing elemental/isotopic fractionation during laser ablation processing; (b) developing new analytical techniques to measure major, minor and trace element abundances without depending on matrix-matched calibrating materials, pre-determined internal standard concentrations and/or multiple analytical methods; (c) applying in situ and solution-based ICP-MS techniques to the analysis of forensic materials for criminal and/or nuclear investigations; and (d) improving precision and limits of detection of laser ablation multi-collector ICP-MS measurements of (ultra) trace elemental and isotopic abundances.     

Isotopic and Elemental Imaging of Geological Materials by Laser Ablation Inductively Coupled Plasma-Mass Spectrometry

Laser ablation ICP-MS represents a promising new development for the acquisition of elemental and isotopic images from a variety of different materials. Compared to existing methods for imaging, it offers relatively rapid throughput, very wide dynamic range, a relatively clean mass spectrum, utility at a variety of scales (from μm to cm) and multi-element/isotopic capability. Although developing rapidly in the biological sciences, the method has not yet seen widespread application to geological materials. This contribution documents some preliminary experiments aimed at understanding the fundamental aspects of elemental and isotopic image acquisition using laser ablation ICP-MS. In particular, we note that ablation cell designs must be optimised to promote rapid system response, in contrast to the signal-smoothing that is often preferred for simple spot analyses. Furthermore, experimental parameters must be carefully evaluated on a system-by-system basis to avoid the blurring effects of re-sampling phenomena. With careful attention to these details, and development of appropriate data processing software, laser ablation ICP-MS imaging has much to offer workers in the Earth and environmental sciences.     

Calcium Carbonate and Phosphate Reference Materials for Monitoring Bulk and Microanalytical Determination of Sr Isotopes

In situ laser ablation analyses rely on the microanalytical homogeneity of reference materials (RMs) and a similar matrix and mass fraction between unknown samples and RMs to obtain reliable results. Suitable carbonate and phosphate RMs for determination of Sr isotope ratios in such materials are limited. Thus, we determined ⁸⁷Sr/⁸⁶Sr ratios of several carbonate (JCt‐1, JCp‐1, MACS‐1, MACS‐3) and phosphate (MAPS‐4, MAPS‐5, NIST SRM 1400, NIST SRM 1486) international RMs using dissolved samples and two different multi‐collector inductively coupled plasma‐mass spectrometers (MC‐ICP‐MS). Our Sr isotope data are in agreement with published data and have an improved measurement precision for some RMs. For MACS‐1, we present the first ⁸⁷Sr/⁸⁶Sr value. We tested the suitability of these materials for microanalytical analyses by LA‐MC‐ICP‐MS, with two different laser ablation systems: a conventional nanosecond laser and a state‐of‐the‐art femtosecond laser. We investigated the RMs micro‐homogeneity and compared the data with our solution data. Both laser ablation systems yielded identical ⁸⁷Sr/⁸⁶Sr ratios within uncertainty to the solution data for RMs with low interferences of REEs. Therefore, these carbonate and phosphate RMs can be used to achieve accurate and precise results for in situ Sr isotope investigations by LA‐MC‐ICP‐MS of similar materials.     

Multiple Collector ICP-MS: Introduction to Instrumentation, Measurement Techniques and Analytical Capabilities

The technique of multiple collector ICP-MS (MC-ICP-MS) has recently attracted much attention, because it permits the precise measurement of isotope compositions for a wide range of elements. This review article discusses the particular advantages of this mass spectrometric technique and provides an overview of the instrumentation. The performance characteristics of MC-ICP-MS instruments and procedures for the correction of instrumental mass discrimination are covered. The strategies that are employed to avoid analytical artefacts from spectral interferences and matrix effects are also considered. A range of applications are then discussed, to provide an overview of the versatility of this mass spectrometric technique. The diversity of applications, which include the measurement of radiogenic and stable isotope ratios, the determination of trace element concentrations by isotope dilution and in situ isotopic measurements using a laser ablation system, highlight the great relevance of MC-ICP-MS to present and future research in various Earth science disciplines.     

CAMAM: A Miniature Laser Ablation Ionisation Mass Spectrometer and Microscope‐Camera System for In Situ Investigation of the Composition and Morphology of Extraterrestrial Materials

Performance studies of a microscope‐camera system (MCS) and a laser ablation/ionisation mass spectrometer (LIMS) instrument (referred to here as a laser mass spectrometer or LMS) are presented. These two instruments were designed independently for in situ analysis of solids on planetary surfaces and will be combined to a single miniature instrument suite for in situ chemical and morphological analysis of surface materials on planetary bodies. LMS can perform sensitive chemical (elemental, isotope and molecular) analyses with spatial resolution close to micrometre‐sized grains. It allows for studies with mass resolution (M/ΔM) up to 800 in ablation mode (elemental composition) and up to 1500 in desorption mode (molecular analysis). With an effective dynamic range of at least eight orders of magnitude, sensitive and quantitative measurements can be conducted of almost all elements and isotopes with a concentration larger than a few ppb atoms. Hence, in addition to the major element composition, which is important for the determination of mineralogical constituents of surface materials, trace elements can also be measured to provide information on mineral formation processes. Highly accurate isotope ratio measurements can be used to determine in situ geochronology of sample material and for investigations of various isotope fractionation processes. MCS can conduct optical imagery of mm‐sized objects at several wavelengths with micrometre spatial resolution for the characterisation of morphological surface details and to provide insight into surface mineralogy. Furthermore, MCS can help in the selection of sample surface areas for further mass spectrometric analysis of the chemical composition. Surface auto‐fluorescence measurements and images in polarised light are additional capabilities of the MCS, to identify either fluorescing minerals or organic materials, if present on the analysed surface, for further investigation by LMS. The results obtained by investigations of NIST reference materials, amino acid films and a natural graphite sample embedded in silicate rock are presented to illustrate the performance of the instruments and their potential to deliver chemical information for mineral and organic phases in their geological context.     

Precise and accurate in situ Pb-Pb dating of apatite, monazite, and sphene by laser ablation multiple-collector ICP-MS

To evaluate in situ Pb dating by laser ablation multiple-collector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS), we analysed apatite, sphene, and monazite from Paleoproterozoic metamorphic rocks from West Greenland. Pb isotope ratios were also determined in the National Institute of Standards and Technology (NIST) 610 glass standard and were corrected for mass fractionation by reference to the measured thallium isotope ratio. The NIST 610 glass was used to monitor Pb isotope mass fractionation in the low Tl/Pb accessory minerals. Replicate analyses of the glass (1 to 2 min) yielded ratios with an external reproducibility comparable to conventional analyses of standard reference material 981 by thermal ionisation mass spectrometry (TIMS). Mineral grains were generally analysed with a 100-μm laser beam, although some monazite crystals were analysed at smaller spot sizes (10 and 25 μm). The common Pb isotope ratios required for age calculations were either measured on coexisting plagioclase by LA-MC-ICP-MS or could be ignored, as individual crystals exhibit sufficient Pb isotopic heterogeneity to perform isochron calculations on replicate analyses of single crystals. Mean mineral ages with the ²⁰⁴Pb ion beam measured in the multiplier were as follows: apatite, 1715 ± 23 m.y.; sphene, 1789 ± 11 m.y.; and monazite, 1783 to 1888 m.y., with relative uncertainties on individual monazite ages of <0.2% but highly reproducible age determinations on single monazite crystals (?1%). Isochron ages calculated from several mineral analyses without assumption of common Pb also yield precise age determinations. Apatite and monazite Pb ages determined by in situ Pb isotope analysis are identical to those determined by conventional TIMS analysis of bulk mineral separates, and the analytical uncertainties of these short laser analyses with no prior mechanical or chemical separation are comparable to those obtained by TIMS. Detailed examination of the sphene in situ age data does, however, show a small discrepancy between the LA-MC-ICP-MS and TIMS ages (∼1% younger). High-resolution mass scans of the sphene during ablation clearly showed several small and as yet unidentified isobaric interferences that overlap with the ²⁰⁷Pb peak at the resolution conditions for measurement of isotope ratios. These might account for the age discrepancy between the LA-MC-ICP-MS and TIMS sphene ages. LA-MC-ICP-MS is a rapid, accurate, and precise method for in situ determination of Pb isotope ratios that can be used for geochronological studies in a manner similar to an ion microprobe, albeit currently at a somewhat degraded spatial resolution. Further modifications to the LA-MC-ICP-MS system, such as improved sensitivity, ion transmission, and LA methodology, may lead to this type of instrument becoming the method of choice for many types of in situ Pb isotope dating.     

激光探针稳定同位素分析技术的现状及发展前景

微区分析是同位素测试发展的重要方向。激光探针微区稳定同位素分析方法是同位素微区分析的重要手段。激光探针微区稳定同位素研究始于 2 0世纪 80年代 ,开始时主要集中于轻元素的稳定同位素研究。目前它已广泛用于碳酸盐碳、氧同位素 ,硫化物硫同位素 ,硅酸盐氧、硅同位素和氮同位素研究。近年来 ,多接收等离子质谱分析技术在重金属元素 (如铁、铜、锌、钼等 )的同位素分析方面取得迅速发展。因而 ,重金属元素的微区稳定同位素研究又成为当前的热点。文中对轻元素和重元素的激光探针微区稳定同位素分析的制样装置与设备 ,各种相关分析技术 ,以及在矿物、岩石与矿石研究中的应用现状进行了介绍。对激光探针微区稳定同位素分析技术的发展前景做了讨论。     

Matrix-independent Fe isotope ratio determination in silicates using UV femtosecond laser ablation

UV femtosecond laser ablation coupled to MC-ICP-MS provides a promising in situ tool to investigate elemental and isotope ratios by non-matrix-matched calibration. In this study, we investigate Fe isotope composition in siliceous matrices including biotite, hornblende, garnet, fayalite and forsterite (San Carlos Olivine), and an oceanic Fe–Mn crust using the iron reference material IRMM-014 for calibration. To test the accuracy of the laser ablation data, Fe isotope compositions were obtained independently by solution ICP-MS after chromatographic separation of Fe. Sample materials with low Cr content, i.e. biotite, hornblende, fayalite and the Fe–Mn crust, reveal δ^56/54Fe and δ^57/54Fe values that agree with those from solution ICP-MS data within the measured precision. For high Cr concentration (⁵⁴Cr/⁵⁴Fe >0.0001), i.e. in the garnet and forsterite sample, δ^56/54Fe and δ^57/54Fe values were derived from ⁵⁷Fe/⁵⁶Fe ratios as correction of the isobaric interference of ⁵⁴Cr on ⁵⁴Fe is unsatisfactory. This approach provides accurate results for both minerals. Moreover, the garnet crystal exhibits isotopic zonation with differences of 0.3‰ in δ^56/54Fe showing that substantial heterogeneities exist in high-temperature metamorphic minerals. Multiple analyses of homogeneous sample materials reveal a repeatability of 0.1‰ (2 SD) for δ^56/54Fe and 0.2‰ (2 SD) for δ^57/54Fe, respectively. This study adds to the observations of Horn et al. (2006) who have shown that the determination of Fe isotope ratios in various matrices including iron alloys, iron oxides and hydroxides, iron sulfide and iron carbonates can be performed with high accuracy and precision at high spatial resolution using UV femtosecond laser ablation ICP-MS. These results demonstrate that femtosecond laser ablation ICP-MS is a largely matrix-independent method, which provides a substantial advantage over commonly employed nanosecond laser ablation systems.     

Lead Isotope Homogeneity of NIST SRM 610 and 612 Glass Reference Materials: Constraints from Laser Ablation Multicollector ICP-MS (LA-MC-ICP-MS) Analysis

This contribution presents data for laser ablation multicollector ICP‐MS (LA‐MC‐ICP‐MS) analyses of NIST SRM 610 and 612 glasses with the express purpose of examining the Pb isotope homogeneity of these glasses at the ～ 100 μm spatial scale, relevant to in situ analysis. Investigation of homogeneity at these scales is important as these glasses are widely used as calibrators for in situ measurements of Pb isotope composition. Results showed that at the levels of analytical uncertainty obtained, there was no discernable heterogeneity in Pb isotope composition of NIST SRM 610 and also most probably for NIST SRM 612. Traverses across the ～ 1.5 mm glass wafers supplied by NIST, consisting of between 75 and 133 individual measurements, showed no compositional outliers at the two standard deviation level beyond those expected from population statistics. Overall, the measured Pb isotope ratios from individual traverses across NIST SRM 610 and 612 wafers closely approximate single normally‐distributed populations, with standard deviations similar to the average internal uncertainty for individual measurement blocks. Further, Pb isotope ratios do not correlate with Tl/Pb ratios measured during the analysis, suggesting that regions of volatile element depletion (marked by low Tl/Pb) in these glasses are not associated with changes in Pb isotope composition. For NIST SRM 610 there also appeared to be no variation in Pb isotope composition related to incomplete mixing of glass base and trace element spike during manufacture. For NIST SRM 612 there was some dispersion of measured ratios, including some in a direction parallel to the expected mixing line for base‐spike mixing. However, there was no significant correlation parallel to the mixing line. At this time this cannot be unequivocally demonstrated to result from glass heterogeneity, but it is suggested that NIST SRM 610 be preferred for standardising in situ Pb isotope measurements. Data from this study also showed significantly better accuracy and somewhat better precision for ratios corrected for mass bias by external normalisation to Pb isotope ratios measured in bracketing calibrators compared to mass bias corrected via internal normalisation to measured ²⁰⁵Tl/²⁰³Tl, although the Tl isotopic composition of both glasses appears to be homogeneous.     

AERYN: A simple standalone application for visualizing and enhancing elemental maps

Interpretation of high spatial resolution elemental mineral maps can be hindered by high frequency fluctuations, as well as by strong naturally-occurring or analytically-induced variations. We have developed a new standalone program named AERYN (Aspect Enhancement by Removing Yielded Noise) to produce more reliable element distribution maps from previously reduced geochemical data. The program is Matlab-based, designed with a graphic user interface and is capable of rapidly generating elemental maps from data acquired by a range of analytical techniques. A visual interface aids selection of appropriate outlier rejection and drift-correction parameters, thereby facilitating recognition of subtle elemental fluctuations which may otherwise be obscured. Examples of use are provided for quantitative trace element maps acquired using both laser ablation (LA-) ICP-MS and electron probe microanalysis (EPMA) of the cold-water coral Lophelia pertusa. We demonstrate how AERYN allows recognition of high frequency elemental fluctuations, including those which occur perpendicular to the maximum concentration gradient. Such data treatment compliments commonly used processing methods to provide greater flexibility and control in producing elemental maps from micro-analytical techniques.     

Mg isotope heterogeneity in the Allende meteorite measured by UV laser ablation-MC-ICPMS and comparisons with O isotopes

First results from a new UV laser ablation MC-ICPMS method for measuring Mg isotope ratios in situ in meteoritical materials show that there are mass-dependent variations in δ²⁵Mg and δ²⁶Mg up to 1.5 ‰ per amu in chondrules and 0.3‰ per amu in a CAI from the Allende meteorite. In both cases the mass-dependent fractionation is associated with alteration. Comparisons with laser ablation O isotope data indicate that incorporation of pre-existing grains of forsterite with distinct Mg and O isotopic compositions and post-formation alteration both contributed to the variability in Mg isotope ratios in the chondrules, resulting in a correlation between high δ²⁵Mg and low Δ¹⁷O. The laser ablation analyses of the CAI show that high-precision determinations of both δ²⁵Mg and δ²⁶Mg can be used to discriminate features of the ²⁶Al-²⁶Mg isotope system that are relevant to chronology from those that result from element mobility.