Zenisu Ridge: a deep intraoceanic thrust related to subduction, off southwest Japan

During the French-Japanese Kaiko project, Seabeam, seismic and submersible observations were made in the eastern part of the Nankai subduction zone, close to the area of collision between the Izu-Bonin island arc and the Japan margin. The most prominent feature is the Zenisu Ridge, an elongated relief of the Philippine Sea plate running parallel to the Trench. Magnetic anomalies indicate that the crust of the Zenisu Ridge is a part of the Shikoku oceanic basin formed in the Early Miocene, 23 Ma ago and presumably uplifted at a later stage. Structural analysis of seismic data and diving observations lead us to interpret the superficial structure as being due to compressive tectonics. Mapping the acoustic basement reveals that the southeastern flank of the ridge is bounded by a double thrust, both segments being of equal magnitude (vertical offset about 1 to 1.5 km). Geophysical data support the hypothesis of a main thrust cutting through most of the lithosphere and flattening at depth. The overall structure of the surrounding area reveals a compressive deformation zone widening toward the east, the magnitude of the compressive deformation decreasing westward as well as southward of the Zenisu Ridge.     

The dynamics of big mantle wedge,magma factory,and metamorphic–metasomatic factory in subduction zones

The East Asian continental margin is underlain by stagnant slabs resulting from subduction of the Pacific plate from the east and the Philippine Sea plate from the south. We classify the upper mantle in this region into three major domains: (a) metasomatic–metamorphic factory (MMF), subduction zone magma factory (SZMF), and the ‘big mantle wedge’ (BMW). Whereas the convection pattern is anticlockwise in the MMF domain, it is predominantly clockwise in the SZMF and BMW, along a cross section from the south. Here we define the MMF as a small wedge corner which is driven by the subducting Pacific plate and dominated by H₂O-rich fluids derived by dehydration reactions, and enriched in large ion lithophile elements (LILE) which cause the metasomatism. The SZMF is a zone intermediate between MMF and BMW domains and constitutes the main region of continental crust production by partial melting through wedge counter-corner flow. Large hydrous plume generated at about 200 km depth causes extensive reduction in viscosity and the smaller scale hydrous plumes between 60 km and 200 km also bring about an overall reduction in the viscosity of SZMF. More fertile and high temperature peridotites are supplied from the entrance to this domain. The domain extends obliquely to the volcanic front and then swings back to the deep mantle together with the subducting slab. The BMW occupies the major portion of upper mantle in the western Pacific and convects largely with a clockwise sense removing the eastern trench oceanward. Sporadic formation of hydrous plume at the depth of around 410 km and the curtain flow adjacent to the trench cause back arc spreading. We envisage that the heat source in BMW could be the accumulated TTG (tonalite–trondhjemite–granodiorite) crust on the bottom of the mantle transition zone. The ongoing process of transportation of granitic crust into the mantle transition zone is evident from the deep subduction of five intra-oceanic arcs on the subducting Philippine Sea plate from the south, in addition to the sediment trapped subduction by the Pacific plate and Philippine Sea plate. The dynamics of MMF, SZMF and BMW domains are controlled by the angle of subduction; a wide zone of MMF in SW Japan is caused by shallow angle subduction of the Philippine Sea plate and the markedly small MMF domain in the Mariana trench is due to the high angle subduction of Pacific plate. The domains in NE Japan and Kyushu region are intermediate between these two. During the Tertiary, a series of marginal basins were formed because of the nearly 2000 km northward shift of the subduction zone along the southern margin of Tethyan Asia, which may be related to the collision of India with Asia and the indentation. The volume of upper mantle under Asia was reduced extensively on the southern margin with a resultant oceanward trench retreat along the eastern margin of Asia, leading to the formation of a series of marginal basins. The western Pacific domain in general is characterized by double-sided subduction; from the east by the oldest Pacific plate and from the south by the oldest Indo-Australian plate. The old plates are hence hydrated extensively even in their central domains and therefore of low temperature. The cracks have allowed the transport of water into the deeper portions of the slab and these domains supply hydrous fluids even to the bottom of the upper mantle. Thus, a fluid dominated upper mantle in the western Pacific drives a number of microplates and promote the plate boundary processes.     

西太平洋边缘构造特征及其演化

西太平洋边缘构造带是地球上规模最大最复杂的板块边界,以台湾和马鲁古海为界,自北往南大致可以分为3段。北段是典型的沟-弧-盆体系,千岛海盆、日本海盆及冲绳海槽均为典型的弧后扩张盆地。中段菲律宾岛弧构造带为双向俯冲带,构造复杂,新生代经历大的位移和重组,使得欧亚大陆边缘的南海、苏禄海和苏拉威西海成因存在很大的争议。南段新几内亚—所罗门构造带是太平洋板块、印度—澳大利亚及欧亚板块共同作用的结果,既有不同阶段的俯冲、碰撞,也有大规模的走滑与弧后的扩张,其间既有新扩张的海盆,又有正在俯冲消亡的海盆。台湾岛处于枢纽部位,欧亚板块在此被撕裂,南部欧亚大陆边缘南海洋壳沿马尼拉海沟俯冲于菲律宾岛弧之下,而北部菲律宾海洋壳沿琉球海沟俯冲欧亚大陆之下。马鲁古海是西太平洋板块边界又一转折点,马鲁古海板块往东下插于哈马黑拉之下,往西下插于桑义赫弧,形成反U形双向俯冲汇聚带,其洋壳板块已基本全部消失,致使哈马黑拉弧与桑义赫弧形成弧-弧碰撞。     

Subduction erosion and accretion in the Solomon Sea region

The Solomon Sea region is an area of intense tectonic activity characterized by structural complexity, a high level of seismicity and volcanism, and rapid evolution of plate boundaries. There is little accretion in the eastern New Britain Trench. Accretion gradually increases westward with thick accretion in the western New Britain Trench and in the Trobriand Subduction System. The thick accretion in the western part of the New Britain Trench may be a result of collision from the north of Finisterre-Huon block with New Guinea mainland. The present boundary of the collision is along the Ram-Markham fault. Deformation structures and present day seismicity suggest that the northern block is under compression.

Accretion has occurred in the sediment filled trenches in the Solomon Sea. The scale of the accretionary wedge depends on the amount of trench-fill sediment available. It is unlikely that there is no sediment supply to the eastern part of the New Britain Trench where no accretion is observed and subduction erosion may be occurring. There are two possible mechanisms for subduction erosion of sediment; either a rapid rate of subduction relative to the supply of sediment inhibiting sediment accumulation in the trench; or horizontal tensional force superimposed on both the forearc and backarc regions of the arc. Seafloor spreading in both the Manus and Woodlark basins is fan-like with nearby poles in the western margins of the basins. This may be a reflection of a horizontally compressional field in the western part and a tensional field in the eastern part of the Solomon Sea. Therefore it is possible to conclude that the consumption of sediment in the eastern New Britain Trench is related to the horizontal tensional field superimposed on both the forearc and backarc regions of the subduction system.

Imbricated thrust and overthrust faults in the western New Britain Trench and Trobriand Trough are not linear over long distance, but form wavy patterns in blocks with unit distance of approximately 10 km.     

再论台湾造山带构造格架与演化过程SCIEI北大核心CSCD

台湾造山带是中新世晚期以来相邻菲律宾海板块往北西方向移动,导致北吕宋岛弧系统及弧前增生楔与欧亚大陆边缘斜碰撞形成的。目前该造山带仍在活动,虽然规模很小,但形成了多数大型碰撞造山带中的所有构造单元,是研究年轻造山系统的理想野外实验室,为理解西太平洋弧-陆碰撞过程和边缘海演化提供了一个独特的窗口。本文总结了二十一世纪以来对台湾造山带的诸多研究进展,讨论了其构造单元划分及演化过程。我们将台湾造山带重新划分为6个构造单元,由西至东分依次为:(1)西部前陆盆地;(2)中央山脉褶皱逆冲带;(3)太鲁阁带;(4)玉里-利吉蛇绿混杂岩带;(5)纵谷磨拉石盆地;(6)海岸山脉岛弧系统。其中,西部前陆盆地为6.5Ma以来伴随台湾造山带的隆升剥蚀形成沉积盆地。中央山脉褶皱逆冲带为新生代(57~5.3Ma)欧亚大陆东缘伸展盆地沉积物由于弧-陆碰撞受褶皱、逆冲及变质作用改造形成的。太鲁阁带是造山带中的古老陆块,主要记录中生代古太平洋俯冲在欧亚大陆活动边缘形成的岩浆、沉积和变质岩作用。玉里-利吉蛇绿混杂岩带和海岸山脉岛弧系统分别为中新世中期(~18Ma)以来南中国海板块向菲律宾海板块之下俯冲形成的岛弧和弧前增生楔,其中玉里混杂岩中有典型低温高压变质作用记录,变质年龄为11~9Ma;岛弧火山作用的主要时限为9.2~4.2Ma。纵谷磨拉石盆地记录1.1Ma以来的山间盆地沉积。台湾造山带的构造演化可划分为4个阶段:(a)古太平洋板块俯冲与欧亚大陆边缘增生阶段(200~60Ma);(b)欧亚大陆东缘伸展和南中国海扩张阶段(60~18Ma);(c)南中国海俯冲阶段(18~4Ma);(d)弧-陆碰撞阶段(<6Ma)。台湾弧-陆碰撞造山带是一个特殊案例,其弧-陆碰撞并不伴随着弧-陆之间的洋盆消亡,而是由于北吕宋岛弧及弧前增生楔伴随菲律宾海板块运动向西北方走滑,仰冲到欧亚大陆边缘,形成现今的台湾造山带。     

Westward migration of the Izu-Bonin Trench, northward motion of the Philippine Sea Plate, and their relationships to the Cenozoic tectonics of Japanese island arcs

The essential elements in the understanding of the Cenozoic island arc tectonics of the Japanese Islands came from reconstructing the paleo-position of the plate boundaries and estimating the change in the Philippine Sea Plate motion. By using the 2nd law of the convergence rate of plates, it was estimated that the Izu-Bonin Trench wandered around 400 km east from its present position during the Paleogene and migrated westward thereafter. Island-arc tectonism is related to the convergence rate of plates (1st law of the convergence rate of plates), hence the changes in the Philippine Sea Plate motion was examined by compiling paleomagnetic data. As a result, the main events of the Cenozoic tectonics of Japan were well explained by the change in the position of the plate boundaries and the change in motion of the Philippine Sea Plate.     

The dynamics of big mantle wedge, magma factory, and metamorphic–metasomatic factory in subduction zones

The East Asian continental margin is underlain by stagnant slabs resulting from subduction of the Pacific plate from the east and the Philippine Sea plate from the south. We classify the upper mantle in this region into three major domains: (a) metasomatic–metamorphic factory (MMF), subduction zone magma factory (SZMF), and the ‘big mantle wedge’ (BMW). Whereas the convection pattern is anticlockwise in the MMF domain, it is predominantly clockwise in the SZMF and BMW, along a cross section from the south. Here we define the MMF as a small wedge corner which is driven by the subducting Pacific plate and dominated by H₂O-rich fluids derived by dehydration reactions, and enriched in large ion lithophile elements (LILE) which cause the metasomatism. The SZMF is a zone intermediate between MMF and BMW domains and constitutes the main region of continental crust production by partial melting through wedge counter-corner flow. Large hydrous plume generated at about 200 km depth causes extensive reduction in viscosity and the smaller scale hydrous plumes between 60 km and 200 km also bring about an overall reduction in the viscosity of SZMF. More fertile and high temperature peridotites are supplied from the entrance to this domain. The domain extends obliquely to the volcanic front and then swings back to the deep mantle together with the subducting slab. The BMW occupies the major portion of upper mantle in the western Pacific and convects largely with a clockwise sense removing the eastern trench oceanward. Sporadic formation of hydrous plume at the depth of around 410 km and the curtain flow adjacent to the trench cause back arc spreading. We envisage that the heat source in BMW could be the accumulated TTG (tonalite–trondhjemite–granodiorite) crust on the bottom of the mantle transition zone. The ongoing process of transportation of granitic crust into the mantle transition zone is evident from the deep subduction of five intra-oceanic arcs on the subducting Philippine Sea plate from the south, in addition to the sediment trapped subduction by the Pacific plate and Philippine Sea plate. The dynamics of MMF, SZMF and BMW domains are controlled by the angle of subduction; a wide zone of MMF in SW Japan is caused by shallow angle subduction of the Philippine Sea plate and the markedly small MMF domain in the Mariana trench is due to the high angle subduction of Pacific plate. The domains in NE Japan and Kyushu region are intermediate between these two. During the Tertiary, a series of marginal basins were formed because of the nearly 2000 km northward shift of the subduction zone along the southern margin of Tethyan Asia, which may be related to the collision of India with Asia and the indentation. The volume of upper mantle under Asia was reduced extensively on the southern margin with a resultant oceanward trench retreat along the eastern margin of Asia, leading to the formation of a series of marginal basins. The western Pacific domain in general is characterized by double-sided subduction; from the east by the oldest Pacific plate and from the south by the oldest Indo-Australian plate. The old plates are hence hydrated extensively even in their central domains and therefore of low temperature. The cracks have allowed the transport of water into the deeper portions of the slab and these domains supply hydrous fluids even to the bottom of the upper mantle. Thus, a fluid dominated upper mantle in the western Pacific drives a number of microplates and promote the plate boundary processes.     

Ocean trench blocked and obliterated by Banda forearc collision with Australian proximal continental slope

The bathymetry and abrupt changes in earthquake seismicity around the eastern end of the Java Trench suggest it is now blocked south–east of Sumba by the Australian, Jurassic-rifted, continental margin forming the largely submarine Roti–Savu Ridge. Plate reconstructions have demonstrated that from at least 45 Ma the Java Trench continued far to the east of Sumba. From about 12 Ma the eastern part of the Java Trench (called Banda Trench) continued as the active plate boundary, located between what was to become Timor Island, then part of the Australian proximal continental slope, and the Banda Volcanic Arc. This Banda Trench began to be obliterated by continental margin-arc collision between about 3.5 and 2 Ma.The present position of the defunct Banda Trench can be located by use of plate reconstructions, earthquake seismology, deep reflection seismology, DSDP 262 results and geological mapping as being buried under the para-autochthon below the foothills of southern Timor. Locating the former trench guides the location of the apparently missing large southern part of the Banda forearc that was carried over the Australian continental margin during the final stage of the period of subduction of that continental margin that lasted from about 12 Ma to about 3.5 Ma.Tectonic collision is defined and distinguished from subduction and rollback. Collision in the southern part of the Banda Arc was initiated when the overriding forearc basement of the upper plate reached the proximal part of the Australian continental slope of the lower plate, and subduction stopped. Collision is characterised by fold and thrust deformation associated with the development of structurally high decollements. This collision deformed the basement and cover of the forearc accretionary prism of the upper plate with part of the unsubducted Australian cover rock sequences from the lower plate. Together with parts of the forearc basement they now form the exposed Banda orogen. The conversion of the northern flank of the Timor Trough from being the distal part of the Banda forearc accretionary prism, carried over the Australian continental margin, into a foreland basin was initiated by the cessation of subduction and simultaneous onset of collisional tectonics.This reinterpretation of the locked eastern end of the Java Trench proposes that, from its termination south of Sumba to at least as far east as Timor, and probably far beyond, the Java-Banda Trench and forearc overrode the subducting Australian proximal continental slope, locally to within 60 km of the shelf break. Part of the proximal forearc's accretionary prism together with part of the proximal continental slope cover sequence were detached and thrust northwards over the Java-Banda Trench and forearc by up to 80 km along the southwards dipping Savu Thrust and Wetar Suture. These reinterpretations explain the present absence of any discernible subduction ocean trench in the southern Banda Arc and the narrowness of the forearc, reduced to 30 km at Atauro, north of East Timor.     

Subducting seamounts and deformation of overriding forearc wedges around Japan

Two subducting seamounts under inner trench slopes have been identified around Japan on the basis of magnetic anomalies, morphology and geological structure. The first one is located under the foot of the inner trench slope at the junction between the Japan Trench and the Kuril Trench. Another one occurs beneath the slope slightly seaward of the Tosabae (the basement high at the trench slope break along the Nankai Trough off Shikoku). The magnetic anomalies of seamount origin are accompanied by the characteristic morphology of a forearc wedge i.e., a swell landward and a depression seaward. The seamounts beneath the inner trench slopes have preserved magnetization showing reasonably consistent directions, which suggests that the subducting seamounts have kept roughly their original shapes. The morphology of the forearc wedge can be explained by a subducting seamount on the oceanic crust pushing the forearc material forward and upward. Deformation of the forearc wedge by the subducting seamount extends to the forearc basin. The seamounts are stronger and less deformable than the inner slope material and are not offscraped onto inner trench slopes.

Two other examples of deformed inner trench slopes around Japan which can be explained by subduction of topographic highs are presented. One example is a depression on the foot of the inner trench slope northeast of the junction between the Kyushu-Palau Ridge and the Nankai Trough. Another one is an area of complex morphology of the inner trench slope along the Japan Trench around the Daiichi-Kashima Seamount.     

An expression of Philippine Sea plate rotation: the Parece Vela and Shikoku Basins

The Philippine Sea plate, located between the Pacific, Eurasian and Australian plates, is the world's largest marginal basin plate. The motion of the Philippine Sea plate through time is poorly understood as it is almost entirely surrounded by subduction zones and hence, previous studies have relied on palaeomagnetic analysis to constrain its rotation. We present a comprehensive analysis of geophysical data within the Parece Vela and Shikoku Basins—two Oligocene to Miocene back-arc basins—which provide independent constraints on the rotational history of the Philippine Sea plate by means of their seafloor spreading record. We have created a detailed plate model for the opening of the Parece Vela and Shikoku Basins based on an analysis of all available magnetic, gravity and bathymetric data in the region. Subduction along the Izu–Bonin–Mariana trench led to trench roll-back, arc rupture and back-arc rifting in the Parece Vela and Shikoku Basins at 30 Ma. Seafloor spreading in both basins developed by chron 9o (28 Ma), and possibly by chron 10o (29 Ma), as a northward and southward propagating rift, respectively. The spreading orientation in the Parece Vela Basin was E–W as opposed to ENE–WSW in the Shikoku Basin. The spreading ridges joined by chron 6By (23 Ma) and formed a R–R–R triple junction to accommodate the difference in spreading orientations in both basins. At chron 6No (20 Ma), the spreading direction in the Parece Vela Basin changed from E–W to NE–SW. At chron 5Ey (19 Ma), the spreading direction in the Shikoku Basin changed from ENE–WSW to NE–SW. This change was accompanied by a marked decrease in spreading rate. Cessation of back-arc opening occurred at 15 Ma, a time of regional plate reorganisation in SE Asia. We interpret the dramatic change in spreading rate and direction from E–W to NE–SW at 20±1.3 Ma as an expression of Philippine Sea plate rotation and is constrained by the spacing between our magnetic anomaly identifications and the curvature of the fracture zones. This rotation was previously thought to have begun at 25 Ma as a result of a global change in plate motions. Our results suggest that the Philippine Sea plate rotated clockwise by about 4° between 20 and 15 Ma about a pole located 35°N, 84°E. This implies that the majority of the 34° clockwise rotation inferred to have occurred between 25 and 5 Ma from paleomagnetic data may have in fact been confined to the period between 15 and 5 Ma.     

Deep slab subduction and dehydration and their geodynamic consequences: Evidence from seismology and mineral physics

We present new pieces of evidence from seismology and mineral physics for the existence of low-velocity zones in the deep part of the upper mantle wedge and the mantle transition zone that are caused by fluids from the deep subduction and deep dehydration of the Pacific and Philippine Sea slabs under western Pacific and East Asia. The Pacific slab is subducting beneath the Japan Islands and Japan Sea with intermediate-depth and deep earthquakes down to 600 km depth under the East Asia margin, and the slab becomes stagnant in the mantle transition zone under East China. The western edge of the stagnant Pacific slab is roughly coincident with the NE–SW Daxing'Anling-Taihangshan gravity lineament located west of Beijing, approximately 2000 km away from the Japan Trench. The upper mantle above the stagnant slab under East Asia forms a big mantle wedge (BMW). Corner flow in the BMW and deep slab dehydration may have caused asthenospheric upwelling, lithospheric thinning, continental rift systems, and intraplate volcanism in Northeast Asia. The Philippine Sea slab has subducted down to the mantle transition zone depth under Western Japan and Ryukyu back-arc, though the seismicity within the slab occurs only down to 200–300 km depths. Combining with the corner flow in the mantle wedge, deep dehydration of the subducting Pacific slab has affected the morphology of the subducting Philippine Sea slab and its seismicity under Southwest Japan. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent small mantle plumes, or hot upwelling associated with the deep slab subduction. Slab dehydration may also take place after a continental plate subducts into the mantle.     

History of the Celebes Sea Basin based on its stratigraphic and sedimentological record

The stratigraphic and sedimentary history of the Celebes Sea Basin provides the basis for a tectonic model for its evolution which is consistent with new regional plate reconstructions. Cores drilled on Leg 124 of the Ocean Drilling Program (sites 767 and 770) form a stratigraphic record from the basement to the sea floor in just under 800 metres of sedimentary succession. The basement itself is basalt with a strong MORB affinity. Radiolaria in pelagic mudstones at the base of the succession indicate a late middle Eocene age. A very condensed pelagic sequence (90 m in 20 Ma) suggests a setting which was distal from sources of terrigenous clastics and volcaniclastics and below the CCD. These characteristics are similar to the West Philippine Sea Basin (drilled on DSDP Legs 31 and 59), which also has oceanic basement, dated at 44–42 Ma, and Paleogene pelagic strata. These data are therefore consistent with any plate reconstruction model which has these two basins forming as part of the same ocean basin.During the Miocene quartz-rich sandy turbidites were deposited in the Celebes Sea Basin. This influx of terrigenous clastics occurred for a brief period in middle to late Miocene times (c. 10 Ma). The nearest large continental landmass which could have acted as the source of this mature siliciclastic detritus was the island of Borneo, and the onset of this clastic supply may be related to uplift caused by collision events on the island. Cessation of terrigenous clastic supply to the basin centre occurred as southward subduction of the underlying oceanic crust beneath the northern arm of Sulawesi began. It is speculated that the development of a trench along the southern margin of the basin acted as a trap for detritus coming from Borneo, diverting material from the basin centre.     

Structural characteristics controlling the seismicity crustal structure of southern Japan Trench fore-arc region, revealed by ocean bottom seismographic data

The Japan Trench is a plate convergent zone where the Pacific Plate is subducting below the Japanese islands. Many earthquakes occur associated with plate convergence, and the hypocenter distribution is variable along the Japan Trench. In order to investigate the detailed structure in the southern Japan Trench and to understand the variation of seismicity around the Japan Trench, a wide-angle seismic survey was conducted in the southern Japan Trench fore-arc region in 1998. Ocean bottom seismometers (15) were deployed on two seismic lines: one parallel to the trench axis and one perpendicular. Velocity structures along two seismic lines were determined by velocity modeling of travel time ray-tracing method. Results from the experiment show that the island arc Moho is 18–20 km in depth and consists of four layers: Tertiary and Cretaceous sedimentary rocks, island arc upper and lower crust. The uppermost mantle of the island arc (mantle wedge) extends to 110 km landward of the trench axis. The P-wave velocity of the mantle wedge is laterally heterogeneous: 7.4 km/s at the tip of the mantle wedge and 7.9 km/s below the coastline. An interplate layer is constrained in the subducting oceanic crust. The thickness of the interplate layer is about 1 km for a velocity of 4 km/s. Interplate layer at the plate boundary may cause weak interplate coupling and low seismicity near the trench axis. Low P-wave velocity mantle wedge is also consistent with weak interplate coupling. Thick interplate layer and heterogeneous P-wave velocity of mantle wedge may be associated with the variation of seismic activity.     

Deep slab subduction and dehydration and their geodynamic consequences: Evidence from seismology and mineral physics

We present new pieces of evidence from seismology and mineral physics for the existence of low-velocity zones in the deep part of the upper mantle wedge and the mantle transition zone that are caused by fluids from the deep subduction and deep dehydration of the Pacific and Philippine Sea slabs under western Pacific and East Asia. The Pacific slab is subducting beneath the Japan Islands and Japan Sea with intermediate-depth and deep earthquakes down to 600 km depth under the East Asia margin, and the slab becomes stagnant in the mantle transition zone under East China. The western edge of the stagnant Pacific slab is roughly coincident with the NE–SW Daxing'Anling-Taihangshan gravity lineament located west of Beijing, approximately 2000 km away from the Japan Trench. The upper mantle above the stagnant slab under East Asia forms a big mantle wedge (BMW). Corner flow in the BMW and deep slab dehydration may have caused asthenospheric upwelling, lithospheric thinning, continental rift systems, and intraplate volcanism in Northeast Asia. The Philippine Sea slab has subducted down to the mantle transition zone depth under Western Japan and Ryukyu back-arc, though the seismicity within the slab occurs only down to 200–300 km depths. Combining with the corner flow in the mantle wedge, deep dehydration of the subducting Pacific slab has affected the morphology of the subducting Philippine Sea slab and its seismicity under Southwest Japan. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent small mantle plumes, or hot upwelling associated with the deep slab subduction. Slab dehydration may also take place after a continental plate subducts into the mantle.     

Melanesian back-arc basin and arc development: Constraints from the eastern Coral Sea

The eastern Coral Sea is a poorly explored area at the north-eastern corner of the Australian Tectonic Plate, where interaction between the Pacific and Australian plate boundaries, and accretion of the world's largest submarine plateau – the Ontong Java Plateau – has resulted in a complex assemblage of back-arc basins, island arcs, continental plateaus and volcanic products. This study combines new and existing magnetic anomaly profiles, seafloor fabric from swath bathymetry data, Ar–Ar dating of E-MORB basalts, palaeontological dating of carbonate sediments, and plate modelling from the eastern Coral Sea. Our results constrain commencement of the opening of the Santa Cruz Basin and South Rennell Trough to c. 48 Ma and termination at 25–28 Ma. Simultaneous opening of the Melanesian Basin/Solomon Sea further north suggests that a single > 2000 km long back-arc basin, with at least one triple junction existed landward of the Melanesian subduction zone from Eocene–Oligocene times. The cessation of spreading corresponds with a reorganisation of the plate boundaries in the area and the proposed initial soft collision of the Ontong Java Plateau. The correlation between back-arc basin cessation and a widespread plate reorganisation event suggests that back-arc basins may be used as markers for both local and global plate boundary changes.     

从东海石油地质重要进展看西太平洋大陆边缘新生代盆地的构造演化——一种海沟向洋后退的残余弧后盆地演化模式

东海盆地石油地质研究在近二十年里主要取得五方面的进展 :证明了盆地是由一组大陆边缘新生界由西向东逐个变新的“盆地群体”组成 ,建立了陆架地区以组为单位的整个新生代地层单元 ,详细划分了西湖凹陷的内部地质结构 ,认定了煤和煤系沉积是东海陆架区的主力油气源岩 ,通过大量钻井验证了盆地中三类不同成因的圈闭。从环西太平洋盆地形成的地球动力学背景看 ,西太平洋是一个自北而南的沟—弧—盆 (陆缘海 )系统 ;大体以台湾海峡为界 ,东海盆地是一个由转换或被动边缘演化而来的聚敛边缘 ,而南海属于由活动或聚敛边缘转化而来的被动边缘。东海盆地与菲律宾海盆地具有相似的时空演化特征 ,由此论证了东海新生代盆地属于残余弧后向洋后退盆地     

中国近海海域新生代成盆动力机制分析

中国近海海域发育了渤海湾、东海和南海等10多个新生代富油气沉积盆地,其发育演化过程及动力学背景的异同需要在统一的研究思路和方法下进行系统的总结.以海域盆地油气勘探开发中积累的丰富的地质地球物理资料为基础,详细解释和分析了渤海、东海和南海三大海域新生代盆地的构造地层格架,进一步明确了渤海湾盆地斜向拉分盆地的演化阶段,证实了区域走滑断裂体系对盆地发育的重要控制作用;在东海陆架盆地划分出弧后前陆盆地的演化阶段,认识到区域挤压作用对该盆地的演化过程的重要性;在南海北部深水区发现了大型拆离断层及其所控制的拆离盆地,提出大型拆离断层作用是地壳薄化、地幔剥露和陆缘深水盆地形成演化的主要机制.研究揭示出中国近海海域盆地新生代期间在经历了古新世-中始新世期间分布全区的均一断陷作用之后,从晚始新世开始进入到区域构造的差异性演化阶段,其中渤海湾盆地进入斜向走滑拉分阶段,并持续到渐新世末期,随后是中新世的热沉降和上新世以来的加速沉降过程;东海陆架盆地则进入长期的弧后前陆盆地演化阶段,直到上新世开始才进入区域性的沉降过程;而南海则持续伸展形成深水拆离盆地,并最终在渐新世初期（32 Ma）发生岩石圈裂解,南海洋盆开始扩张,陆缘则进入被动大陆边缘演化阶段.区域板块运动学分析表明,晚始新世发生的全球板块运动重组事件导致了中国近海海域盆地构造的差异性演化.该事件发生之前,中国东部处于欧亚板块和太平洋板块相互作用构建的"双板块"动力体制之下,太平洋板块的俯冲后退作用导致了陆缘弧后伸展,形成了广布中国东部大陆边缘的盆岭式断陷盆地系.该事件之后,中国大陆处于印度板块、欧亚板块、太平洋板块和菲律宾海板块等构建的"多板块体制"之下,印度-欧亚大陆的碰撞、太平洋板块俯冲方向的转变、古南海的俯冲碰撞、菲律宾海板块的楔入及其与太平洋板块向西运移俯冲等产生了更为复杂的板块运动过程和多期次的运动重组事件导致了中国海域盆地成因类型的多样性和构造演化过程的差异性.海域盆地是我国重要的油气生产基地,本文的研究不仅进一步深化了中国海域盆地的形成演化过程和动力机制的认识,而且对于该区的油气勘探和开发也具有重要的实际应用价值.      

Identification and evolution of tectonic units in the Philippine Sea Plate

The Philippine Sea Plate is located at the convergence zone of the Eurasian Plate,the Pacific Plate,and the Indo-Australian Plate.This paper divides the Philippine Sea Plate into two second-order tectonic units and eight third-order tectonic units by summarizing the marine geological,geophysical,and submarine geomorphological data of the Philippine Sea Plate collected for years and referring to the seafloor spreading theory and the trench-arc-basin system.The two second-order tectonic units are the West Philippine Sea block and the Izu-Bonin-Mariana arc-basin system.The former includes the West Philippine Basin,the Huatung Basin,the Daito Basin,and the Palau Basin,while the latter consists of the Kyushu-Palau Ridge,the Shikoku-Parece Vela Basin,the Izu-Bonin Arc,and the Mariana Arc.Furthermore,this study concludes that the Philippine Sea Plate has undergone three stages of tectonic evolution,namely the early stage of the evolution of marginal basins with Cretaceous basement(Early Cretaceous),the middle stage of the spreading of the West Philippine Basin(Eocene),and the late stage of the subduction of the Izu-Bonin-Mariana arc-basin system(Oligocene-present).The Kyushu-Palau Ridge is a window to discover the tectonic evolution of the Philippine Sea Plate due to its unique geographical location.     

台湾岛以南海域新近纪的弧-陆碰撞造山作用

台湾岛以南海域(台南滨海)弧—陆碰撞带位于欧亚板块、菲律宾海板块和南海的结合部位,是新近纪弧—陆碰撞研究的理想场所。本文通过对南海973航次在该区域的多道地震剖面的解释,认为台南滨海弧—陆碰撞带增生的火山—沉积楔由恒春海脊和高屏斜坡两部分组成,前者是菲律宾海板块的增生楔,后者是欧亚板块的增生楔,在增生楔体和火山弧之间是作为弧前盆地的北吕宋海槽。自中新世中期以来,南海洋壳开始沿着马尼拉海沟向菲律宾海板块俯冲,形成活动大陆边缘的增生部分——恒春海脊;与此同时菲律宾海板块开始向北西方向移动,前缘的吕宋岛弧距今6.5Ma以来朝着亚洲陆缘斜向汇聚,形成了被动大陆边缘的增生部分——高屏斜坡。由于菲律宾海板块和欧亚板块之间的斜向汇聚,弧—陆碰撞具有穿时性,造山作用首先发生在台湾岛的北部,然后向南部及台南滨海发展。     

Eocene to Miocene geometry of the West Antarctic Rift System

Tectonic models for the Late Cretaceous/Tertiary evolution of the West Antarctic Rift System range from hundreds of kilometres of extension to negligible strike-slip displacement and are based on a variety of observations, as well as kinematic and geodynamic models. Most data constraining these models originate from the Ross Sea/Adare Trough area and the Transantarctic Mountains. We use a new Antarctic continental crustal-thinning grid, combined with a revised plate-kinematic model based on East Antarctic – Australia – Pacific – West Antarctic plate circuit closure, to trace the geometry and extensional style of the Eocene – Oligocene West Antarctic Rift from the Ross Sea to the South Shetland Trench. The combined data suggest that from chron 21 (48 Ma) to chron 8 (26 Ma), the West Antarctic Rift System was characterised by extension in the west to dextral strike-slip in the east, where it was connected to the Pacific – Phoenix – East Antarctic triple junction via the Byrd Subglacial Basin and the Bentley Subglacial Trench, interpreted as pullapart basins. Seismic-reflection profiles crossing the De Gerlache Gravity Anomaly, a tectonic scar from a former spreading ridge jump in the Bellingshausen Sea, suggest Late Tertiary reactivation in a dextral strike-slip mode. This is supported by seismic-reflection profiles crossing the De Gerlache Gravity Anomaly in the Bellingshausen Sea, which show incised narrow sediment troughs and vertical faults indicating strike-slip movement along a north – south direction. Using pre-48 Ma plate circuit closure, we test the hypothesis that the Lord Howe Rise was attached to the Pacific Plate during the opening of the Tasman Sea. We show that this plate geometry may be plausible at least between 74 and 48 Ma, but further work especially on Australian – Antarctic relative plate motions is required to test this hypothesis.