Origin of polyhalite deposits in the Zechstein (Upper Permian) Zdrada platform (northern Poland)

Polyhalite deposits in the Zechstein (Upper Permian) of northern Poland occur in the Lower Werra Anhydrite. In the Zdrada Sulphate Platform, the polyhalite appears to be a very early replacement of anhydrite. The replacement was caused by the halite-precipitating brines which contained potassium and magnesium ions. The formation of polyhalite was preceded by the syndepositional anhydritization of the original gypsum deposit which has often preserved its primary textures. This anhydritization on the platform and its slopes was a reaction of the precipitated gypsum in a hydrologically open evaporite basin, with brines of salt basins adjacent to the sulphate platform. These brines, when nearly saturated with respect to halite, and potassium and magnesium rich, reacted with anhydrite to precipitate polyhalite along the slopes of the Zdrada Platform. The oxygen and sulphur isotopic compositions of sulphate evaporites indicate that marine solutions were the only source of sulphate ions supplied to the Zechstein basin, and that anhydrite was transformed to polyhalite by reaction with marine brines more concentrated than those that precipitated precursor calcium sulphate minerals.     

Sulphate–borate relations in an evaporitic lacustrine environment: the Sultançayir Gypsum (Miocene, western Anatolia)

Calcium-borates, mainly pandermite (priceite) and howlite, but also bakerite and colemanite, are intercalated within the Sultançayir Gypsum (Miocene, Sultançayir Basin, western Anatolia). This lacustrine unit, represented by secondary gypsum in outcrop, is characterized by: (1) a clear facies distribution of depocentral laminated lithofacies and debris-flow deposits, a wide marginal zone of sabkha deposits, and at least one selenitic shoal located toward the basin margin; (2) evaporitic cycles displaying a shallowing-upward trend; and (3) a diagenetic evolution of primary gypsum to (burial) anhydrite followed by its final re-hydration. The calcium borates precipitated only in the depocentre of the lake and were partly affected by synsedimentary reworking, indicating that they formed during very early diagenesis. The lithofacies, which are made up of a host gypsum (finely laminated) and borates (nodules, irregular masses and discontinuous bands; also fine laminations), indicate that the borates grew interstitially because of the inflow and mixing of borate-rich solutions with basinal brines. Borate growth displaced and replaced primary gypsum beneath a relatively deep depositional floor. Borate formation as free precipitates was much less common. The anhydritization of primary gypsum took place during early to late diagenesis (burial <250 m deep). This process also resulted in partial replacement of pandermite and accompanying borates (bakerite and howlite) as well as other early diagenetic minerals (celestite) by anhydrite. Final exhumation resulted in the replacement of anhydrite by secondary gypsum, and in the partial transformation of pandermite and howlite into secondary calcite.     

Palaeogeographic and burial controls on anhydrite genesis: the Badenian basin in the Carpathian Foredeep (southern Poland, western Ukraine)

The Badenian (Middle Miocene) Ca-sulphate deposits of the fore-Carpathian basin – including the shelf and adjacent salt depocentre – have undergone varying degrees of diagenetic change: they are preserved mainly as primary gypsum in the peripheral part of the platform, whereas toward the centre of the basin, where great subsidence occurred during the Miocene, they have been totally transformed into anhydrite. The facies variation and sequence of Badenian anhydrites reflect different genetic patterns of two members of the Ca-sulphate formation. In the lower member (restricted to the platform), anhydrite formed mainly by synsedimentary anhydritization (via nodule formation), whereas in the upper member (distributed throughout the platform and depocentre) the various gypsum/anhydrite lithofacies display a continuum of distinctive anhydrite type-fabrics. These fabrics are based on petrographic features and show from the centre to the margin: (1) syndepositional, interstitial growth of displacive anhydrite; (2) early diagenetic, displacive to replacive (by replacement of former gypsum) anhydrite formation near the depositional surface; (3) early diagenetic, displacive to replacive anhydrite formation during shallow burial; and (4) late-diagenetic (and only partial) replacement of gypsum at deeper burial. The cross-shelf lateral relations of anhydrite lithofacies and fabrics suggest that the diagenesis developed as a diachronous process. These fabrics of the upper member reflect both palaeogeographic (linked to different parts of the basin) and burial controls. Anhydrite growth started very early in the basin centre, presumably related to high-salinity pore fluids; anhydritization prograded updip toward the shelf (landward in a generalized cross-section through the basin). The intensity of gypsum replacement by anhydrite was progressively attenuated landward by a decrease in the salinity of the pore fluids. In each part of the basin, the anhydrite fabric was also controlled by the texture and degree of lithification of the fine-grained primary gypsum lithofacies. Recrystallization of these anhydrite fabrics during late diagenesis, linked to deeper burial conditions, is insignificant, allowing reconstruction of the original anhydritization pattern.     

Meganodular anhydritization: a new mechanism of gypsum to anhydrite conversion (Palaeogene–Neogene,Ebro Basin,North‐east Spain)

A number of Palaeogene to Early Neogene gypsum units are located along the southern margins of the Ebro Basin (North‐east Spain). These marginal units, of Eocene to Lower Miocene age, formed and accumulated deposits of Ca sulphates (gypsum and anhydrite) in small, shallow saline lakes of low ionic concentration. The lakes were fed mainly by ground water from deep regional aquifers whose recharge areas were located in the mountain chains bounding the basin, and these aquifers recycled and delivered Ca sulphate and Na chloride from Mesozoic evaporites (Triassic and Lower Jurassic). In outcrop, the marginal sulphate units are largely secondary gypsum after anhydrite and exhibit meganodules (from 0·5 to >5 m across) and large irregular masses. In the sub‐surface these meganodules and masses are mostly made of anhydrite, which replaced the original primary gypsum. The isotopic composition (11·1 to 17·4‰ for δ¹⁸O_VSMOW; 10·7 to 15·3‰ for δ³⁴S_VCDT) of secondary gypsum in this meganodular facies indicates that the precursor anhydrite derived from in situ replacement of an initial primary gypsum. As a result of ascending circulation of deep regional fluid flows through the gypsum units near the basin margins, the gypsum was partly altered to anhydrite within burial conditions from shallow to moderate depths (from some metres to a few hundred metres?). At such depths, the temperatures and solute contents of these regional flows exceeded those of the ground water today. These palaeoflows became anhydritizing solutions and partly altered the subsiding gypsum units before they became totally transformed by deep burial anhydritization. The characteristics of the meganodular anhydritization (for example, size and geometry of the meganodules and irregular masses, spatial arrangement, relations with the associated lithologies and the depositional cycles, presence of an enterolithic vein complex and palaeogeographic distribution) are compared with those of the anhydritization generated both in a sabkha setting or under deep burial conditions, and a number of fundamental differences are highlighted.     

Depositional theme of a marginal marine evaporite

We have reconstructed the depositional environment of the gypsum-carbonate-shale sequence that comprises the Upper Permian Bellerophon Formation of the southeastern Alps in northern Italy. This formation, which reaches a maximum thickness of 600 m, is roughly divided into two facies: (a) a lower dolomite-gypsum facies, and (2) an upper micritic-skeletal limestone facies. It directly overlies, with transitional contact, a thick red-bed sequence (alluvial fanglomerates, fluviatile sandstones and flood-plain siltstones) and is sharply overlain by Lower Triassic calcarenites (oolites, grapestones, pellets, flat-pebble conglomerates). The lower evaporite facies rocks are found in well-defined cycles, each of which, from bottom to top, consists of (A) thin-bedded, worm-burrowed, vuggy ‘earthy’ micritic dolomite, (B) massive to poorly laminated dark grey to black sandy dolomite carrying isolated gypsum nodules, (C) layered (thin-bedded) nodular gypsum (commonly with ‘enterolithic’ folds) with fragmented partings of dolomite, and (D) massive ‘chicken-wire’ nodular gypsum. At Passo di Valles, just east of Predazzo, and 50 km from the basin margin, we measured forty-six consecutive complete cycles, with an average thickness of 3 m per cycle. We interpret the cyclic sequence as having been deposited in a prograding shallow lagoon—sabkha complex. The worm-burrowed ‘earthy’ dolomite mud accumulated in a shallow hypersaline subtidal lagoon. The black sandy dolomite was an ‘intertidal’ sand-flat devoid of algal mats and constantly churned by burrowers (likely crustaceans). As the shoreline prograded lagoonward evaporative concentration of the groundwater induced diagenetic growth of anhydrite nodules (now gypsum) within the porous sandy dolomite. The layered nodular and ‘chicken-wire’ gypsum of the cycle cap is an extreme product of such displacive intra-sediment growth of anhydrite (now gypsum) above the water table of a completely exposed sabkha, such as is found in the Persian Gulf today. We have observed the same cyclically arranged lithologies in two other evaporite sequences in Italy: the Triassic Raibl Formation of the Southern Alps and the Upper Triassic Burano Formation of the central Apennines. We suggest that this mode of deposition is likely a very common one for at least the early stages of marine evaporite accumulation.     

Deep-water resedimentation of anhydrite and gypsum deposits in the Middle Miocene (Belayim Formation) of the Red Sea, Egypt

The Middle Miocene evaporites in the Red Sea rift were deposited within a complex system of fault-bounded basins that were episodically active during sedimentation. Such a tectonic framework is known to be highly favourable to resedimentation processes. An offshore petroleum well in the north-western Red Sea has cored, below a massive salt unit, an anhydrite-bearing succession which provides an excellent opportunity to study the processes of gravity induced redeposition of Ca-sulphates in a deep basin. Anhydrite deposits, interbedded with siliciclastic layers and thin halite layers, are composed of resedimented facies ranging from fine-grained laminated sediments to coarse-grained breccias. The components derive from the reworking of shelf sediments deposited initially in shallow water to supratidal settings on the surface and edges of structural highs bordering depressions: proximal siliciclastic deposits with interstitial anhydrite (cement patches, nodules) or gypsum and dolostones with early diagenetic anhydrite facies (nodular, chicken-wire) formed in sabkha conditions, interstitially grown gypsum crystals and subaqueous gypsum crusts precipitated in hypersaline ponds, and diatom-rich oozes formed in marine, shallow-water conditions. The homogeneity of the stable isotope composition and petrography of sulphates argue for the initial crystallization of Ca-sulphates within brines of the same origin and in closely interconnected sedimentary settings. The unconsolidated sediments redeposited as slope-foot accumulations were carried both as anhydrite (nodules, soft masses, various fragments, individual grains or crystals released by disintegration of large masses) and gypsum (crystalline aggregates or single crystals) later converted to anhydrite during burial. Layers of chaotic breccia are interpreted as the result of seismic events, whereas the fine-grained deposits could be related to redistribution by nepheloid layers of suspensions of finer grains released by disintegration of the soft anhydrite masses during downslope transport, or of in situ deposits removed by the turbiditic flows.     

Sedimentological characteristics and facies of the evaporite-bearing Kirmir Formation (Neogene), Beypazari Basin, central Anatolia, Turkey

A thick sedimentary sequence comprising fluvial, lacustrine and volcano-sedimentary rocks is present in the Neogene Beypazari Basin, central Anatolia. These units display considerable lateral facies variation and interfinger with alkaline volcanic rocks along the north-eastern margin of the basin. The uppermost Miocene Kirmir Formation contains numerous evaporite horizons. The evaporite sequence is up to 250 m thick and may be divided into four lithofacies. In ascending stratigraphical order these are: (1) gypsiferous claystone facies, (2) thenardite-glauberite facies, (3) laminar gypsum facies and (4) crystalline gypsum facies. These facies interfinger with one another laterally along a section from the margins to central parts of the basin. The lithological and sedimentological features of the Kirmir Formation indicate fluvial, saline playa mudflat, hypersaline ephemeral playa lake and very shallow subaqueous playa lake depositional environments, which probably were influenced by alternating semi-arid and evaporative conditions.     

Sedimentology of Badenian (middle Miocene) gypsum in eastern Galicia, Podolia and Bukovina (West Ukraine)

Primary gypsum is the main evaporite mineral in the middle Miocene (Badenian) of the West Ukraine. The lower part of the gypsum sequence is built of autochthonous gypsum while the upper part is composed of allochthonous gypsum that formed following a major, tectonically induced, change in basin morphology. This change resulted in the destruction of the gypsum deposited on the margins of the basin and formation of redeposition features. Autochthonous gypsum facies were deposited in two main environments: (1) giant gypsum intergrowths precipitated from highly concentrated brines; (2) very shallow subaqueous gypsum deposited in a vast brine pan. The brine pan was characterized by a facies mosaic that reflects an interplay of concentrated brines from the central part of the evaporite basin and diluted brines due to the influx of continental meteoric waters. The facies continuum, microbial gypsum - bedded selenite - massive selenite - sabre gypsum, indicates increasing salinity of the brine with time. This type of facies pattern has been established in recent salinas that are analogous to Badenian gypsum in their lateral facies changes. However, the pattern of facies distribution with respect to the open sea in the Badenian basin is opposite to that found in recent salinas. The pattern of the Badenian gypsum facies in the Ukraine indicates that facies repetition may have been related to climatically controlled salinity changes and not to depth changes, as is commonly used to explain the repetition of sulphate facies in a vertical succession.     

Gypsum–anhydrite transformations in Messinian evaporites of central Tuscany (Italy)

The Messinian succession of Tuscany (central Italy) contains three evaporitic units. Among the several exposed evaporitic lithofacies, only selenitic gypsum precipitated directly from evaporating brines. All the other facies, nodular microcrystalline gypsum, gypsarenites and gypsum laminites, despite their macroscopic differences, display the same petrographic textures, indicating that they are the product of dehydration of gypsum to give anhydrite which has been successively rehydrated to secondary gypsum. These secondary facies show an entire array of textures ranging from cloudy ameboid (xenotopic) with anhydrite relics, to idiotopic without anhydrite relics, that are here interpreted as a sequence of progressive stages of rehydration. The presence of completely hydrated petrofacies at the core of nodules which display a less hydrated rim suggests that these rocks have undergone at least two cycles of a dehydration–rehydration process. This interpretation is supported by the presence of satin spar veins that are replaced by microcrystalline gypsum. Satin spar itself is considered to be a by-product of anhydrite hydration. The first dehydration–rehydration event affected the entire gypsum deposit, producing a completely hydrated (idiotopic) facies together with satin spar veins; the second affected only veins, fractures and the rims of nodules, turning the first generation of satin spar and idiotopic gypsum into cloudy ameboid gypsum. Sedimentary structures typical of sabkha environments indicate for the youngest formation that the first dehydration and rehydration process occurred syndepositionally. The preservation of primary gypsum facies only at sites with condensed sections, indicate for the oldest two formations that the first dehydration event occurred upon burial. This event has been estimated to have occurred in the earliest Pliocene. After the Early Pliocene, dehydration was favored even at shallow depths, due to an increased heat flow related with the emplacement of local crustal magmatic bodies. Rehydration possibly occurred when these formations were uplifted and exposed to ground and/or meteoric water. The Volterra Basin has undergone alternating subsidence and uplift events, that can account for two dehydration–rehydration processes at least, also driven by alternating circulation, in the tectonic fractures, of fresh and salty water, the latter derived from dissolution of Messinian halite.     

A barred-basin marine evaporite in the Upper Proterozoic of the Amadeus Basin, central Australia

The Ringwood evaporite is part of the 900 m.y. old Bitter Springs Formation, a warm-water shallow-marine sequence of stromatolitic dolomite and limestone, microfossiliferous chert, red beds, quartzite, and evaporites. The evaporite at Ringwood comprises two parts: (i) a lower 127 m characterized by brecciated pyritic bituminous dolomite, together with smaller amounts of dolomite-gypsum breccia, friable chloritic dololutite, coarsely crystalline anhydrite, and satin-spar gypsum; and (ii) an upper 133 m which is similar except that bituminous dolomite forms only one bed, and the characteristic rock-type is dolomite-gypsum breccia. The evaporite is overlain by limestone breccia and massive stromatolitic limestone, interpreted as an algal reef. Gypsum is secondary after anhydrite, and the ratio of gypsum to anhydrite increases upwards. The evaporite shows none of the features of a sabkha or desiccated deep ocean basin deposit, and instead is interpreted as the filling of a barred basin which was cut off from the ocean by growth of an algal barrier reef. As circulation became restricted, bituminous dolomite deposited in the lagoon behind the reef, together with pyrite from the destruction by anaerobic bacteria of algal debris derived from the reef. With continued evaporation, brine concentration increased and gypsum precipitated. Occasional dust storms contributed wind-blown clay to the deposit. The barrier reef transgressed diachronously across the evaporite lagoon, and was eventually drowned when normal marine conditions became established. Burial of the evaporite to about 7000 m beneath the succeeding sediments of the Amadeus Basin converted gypsum to anhydrite, and formed chlorite by reaction of clay with dolomite. Late Palaeozoic tectonism folded and brecciated the rocks, and was followed by erosion which eventually exposed the evaporite to ingress of meteoric water. Hydration of anhydrite to gypsum ensued, the reaction becoming less complete with increasing depth from the ground surface.     

Origin and evolution of major salts in the Darling pans,Western Cape,South Africa

Sediment and water samples from 12 saline pans on the semi-arid west coast of South Africa were analysed to determine the origin of salts and geochemical evolution of water in the pans. Pans in the area can be subdivided into large, gypsiferous coastal pans with 79–150 g/kg total dissolved salt (TDS), small inland brackish to saline (2–64 g/kg TDS) pans and small inland brine (168-531 g/kg TDS) pans that have a layer of black sulphidic mud below a halite crust. The salinity of coastal pan waters varies with the seasonal influx of dilute runoff and dissolution of relict Pleistocene marine evaporite deposits. In contrast, inland pans are local topographic depressions, bordered on the north by downslope lunette dunes, where solutes are concentrated by evaporation of runoff, throughflow and groundwater seepage. The composition of runoff and seepage inflow waters is determined by modification of coastal rainfall by weathering, calcite precipitation and ion exchange reactions in the predominantly granitic catchment soils. Evaporation of pan waters leads to precipitation of calcite, Mg–calcite, dolomite, gypsum and halite in a distinct stratigraphic succession in pan sediments. Bicarbonate limits carbonate precipitation, Ca limits gypsum precipitation and Na limits halite precipitation. Dolomitisation of calcite is enhanced by the high Mg/Ca ratio of brine pan waters. Brine pan waters evolve seasonally from Na–Cl dominated brines in the wet winter months to Mg–Cl dominated brines in the dry summer months, when 5–20 cm thick halite crusts cover pan surfaces. Pan formation was probably initiated during a drier climate period in the early Holocene. More recent replacement of natural vegetation by cultivated land may have accelerated salt accumulation in the pans.     

Saline lake carbonates within an Upper Jurassic-Lower Cretaceous continental red bed sequence in the Atacama region of northern Chile

The Codocedo Limestone Member is a thin but laterally persistent lacustrine sequence within the red beds of the Upper Jurassic-Lower Cretaceous Quebrada Monardes Formation, in the Atacama region of northern Chile. The thick succession of clastic terrigenous sediments of the Quebrada Monardes Formation was deposited in an arid to semi-arid environment. Sedimentary facies are indicative of deposition of aeolian dunes, alluvial fans and braided streams, playa-lake mudflats, and saline lakes and coastal lagoons. The strata accumulated in a N-S elongated extensional back-arc basin on the landward side of an active volcanic arc. The 3 m thick Codocedo Limestone Member marks striking facies changes within the Quebrada Monardes Formation. It is underlain by a thick sequence of conglomerates and sandstones, deposited on alluvial fans. The limestone itself is characterized by evaporite minerals and laterally continuous laminations, indicative of deposition by vertical accretion in a perennial saline lake. The overlying siltstones and fine sandstones contain geodes and gypsum pseudomorphs and were deposited on playa-lake mudflats. The limestone therefore represents a relatively short period of lacustrine deposition within an essentially terrigenous succession. The lake was possibly formed quite suddenly, for example by damming of the basin by a lava flow. Sedimentation in the perennial lake was predominantly cyclical. Seasonal planktonic algal blooms produced millimetre-scale laminations. Interbedded with these laminites are centimetre-scale beds of evaporitic gypsum, anhydrite and minor halite. The evaporite minerals have been largely replaced by calcite, chalcedony and quartz. The centimetre-scale cycles may have resulted from periodic freshwater input into the lake. After a period of about 3000 yr the lake dried up, to be replaced by extensive playa-lake mudflats. The Codocedo Limestone Member possibly formed a plane of detachment during an early Tertiary phase of E-W directed regional compression. The limestones and evaporites were folded and extensively brecciated. This deformation probably resulted from simple shear along the bedding plane of the relatively weak evaporite minerals prior to their replacement by calcite and quartz.     

Depositional environments of Upper Miocene (Messinian) evaporite deposits of the Sicilian Basin*

In Sicily, Messinian evaporitic sedimentary deposits are developed under a wide variety of hypersaline conditions and in environments ranging from continental margin (subaerial), to basin-margin supratidal, to intertidal, to subtidal and out into the hypersaline basin proper. The actual water depth at the time of deposition is indeterminate; however, relative terms such as ‘wave base’ and ‘photic zone’ are utilized. The inter-fingering relationships of specific evaporitic facies having clear and recognizable physical characteristics are presented. These include sub-aerial deposits of nodular calcium sulphate formed displacively within clastic sediments; gypsiferous rudites, arenites and arenitic marls, all of which are reworked sediments and are mixed in varying degrees with other clastic materials (subaerial, supratidal, and intertidal to deep basinal deposits). Laminated calcium sulphate alternating with very thin carbonate interlaminae and having two different aspects; one being even and continuous and the other of a wavy, irregular appearance (subtidal, intertidal, and supratidal deposits). Nodular calcium sulphate beds, usually associated with wavy, irregular laminated beds (supratidal, sabkha deposits); very coarsely crystalline gypsum beds (selenite), associated with more even, laminated beds (subaqueous, intertidal to subtidal deposits); wavy anastomozing gypsum beds, composed of very fine, often broken crystals (subaqueous, current-swept deposits); halite having hopper and chevron structures (supratidal to intertidal); and halite, potash salts, etc. having continuous laminated structure (subaqueous, possibly basinal). Evidence for diagenetic changes is observed in the calcium sulphate deposits which apparently formed by tectonic stress and also by migrating hypersaline waters. These observations suggest that the common, massive form of alabastrine gypsum (or anhydrite, in the subsurface) may not always be ascribed to original depositional features, to syndiagenesis or to early diagenesis but may be the result of late diagenesis.     

Evolution of late Triassic rift basin evaporites (Passaic Formation): Newark Basin, Eastern North America

The Passaic Formation of the late Triassic Newark Supergroup is 2700 m thick and was deposited in series of wide, deep to shallow lacustrine environments in the Newark rift basin (eastern North America). The Passaic Formation can be divided into lower, middle, and upper sections based on depositional structures, composition and the distribution and morphology of its evaporites. Evaporites formed as a result of syndiagenetic cementation and/or displacive processes. Evaporitive minerals now include gypsum and anhydrite, although other mineral species, such as glauberite, may have originally existed. Most of the evaporites of the Passaic Formation occur within massive red mudstone and siltstone lithologies in the form of diffuse cements, void-fillings, euhedral crystals, crystal clusters and nodules. These evaporites grew displacively within the fine siliciclastic matrix as a result of changes in the hydrochemical regimes of the rift basin. A well-developed upward increase in the amount of evaporite material is present in the Passaic Formation. This resulted from: (1) long-term, progressive increase in aridity, and (2) significant increase in evaporation surface area of the basin during its tectonic evolution. A nonmarine source for the evaporites is evident from the isotopic data. Sulphate δ³⁴S ranges from 11%. to 3.3%. CDT, while δ¹⁸O ranges from + 15.1%. to + 20.9%. SMOW, indicating derivation from early diagenetic oxidation of organic sulphur and pyrite within the organic-rich, lacustrine deposits. The ⁸⁷Sr/⁸⁶Sr ratios in sulphate are radiogenic (average 0.71211), showing the interaction of basin waters with detrital components and that the Newark Basin was isolated from the world ocean. Most of the original evaporites show evidence of diagenetic change to polycrystalline and polymineralic pseudomorphs now filled with recrystallized coarse-grained anhydrite (1–3 mm size) and low-temperature albite. Homogenization temperatures of fluid inclusions within the coarse-grained anhydrite indicate crystallization temperatures for anhydrite in the range of 150° to 280°C. Such elevated temperatures resulted from circulation of hot water in the basin. Later exhumation of these rocks caused partial to total replacement of anhydrite by gypsum in the upper part of the section. The resulting increase in volume due to hydration of anhydrite at shallow depths also emplaced non-evaporative satin-spar veins (fibrous gypsum) along bedding planes and in fractures. While the local geology of the Newark rift basin controlled the distribution of facies, the sedimentological development of the Passaic Formation evaporites resulted from the world-wide climatic aridity that prevailed during the late Triassic. because the Newark Basin sequence was only covered with about 3 km of sedimentary overburden that correspond to about 100°C and hence suggests that evaporites have experienced alteration by hot fluids. 5 As the Triassic marks the greatest evaporite formation world-wide and profound sense of parched continentality throughout the world existed before the final break-up of the Pangea, the Passaic Formation evaporites are an example of the influence of these palaeoclimatic conditions at the eastern margin of North America.     

The anatomy of a sulphate platform and adjacent basin system in the Leba sub-basin of the Lower Werra Anhydrite (Zechstein, Upper Permian), northern Poland

The Lower Werra Anhydrite (Zechstein, Upper Permian) deposits of the teba area originated in a deep basin setting, in shallow to deep water conditions. Facies changes occur within small distances and suggest fluctuating boundaries between well defined basins and platforms. This pattern of local platforms and adjacent basins developed during deposition. In basinal areas, the sequence is clearly transgressive, whereas on platforms accumulation kept pace with subsidence after an initial transgression. Nodular anhydrite represents a polygenetic deposit which formed at different times with respect to deposition. Massive anhydrite with pseudomorphs after upright-growth gypsum crystals suggest rapid precipitation in a subaqueous environment and/or fluctuating, but generally high, salinity conditions. Massive clastic sulphate originated due to periodic high energy events and resedimentation, or due to brecciation possibly connected with salinity fluctuations and the dissolution of halite. Massive, textureless anhydrite is locally porous and passes upward into breccia, indicating a strongly saline environment. Bedded anhydrite is considered to form in shallow water environments and laminated anhydrite in deep water. Bedded anhydrites contain portions which are graded. Intercalations of sulphate turbidites and upright-growth gypsum suggest fluctuating water depths, with comparatively deep water during turbidite deposition, but shallower conditions during upright-growth gypsum deposition. The sequence observed in slope zones at platform-basin margins, detrital (parautochthonous) sulphate sand to graded beds to basinal laminites, indicates that redistribution processes were important. At the onset of the Lower Werra Anhydrite deposition bathymetric relief existed between the central part of the basin and its margins, where carbonate platforms remained subaerially exposed. Formation of local platforms and adjacent basins required a relatively high subsidence rate, as pre-existing relief cannot account for the total accumulated thickness of the Lower Werra Anhydrite deposits. One implication of this is that the main argument against ‘the shallow water - shallow basin’ evaporite basin model, i.e.,a very fast rate of subsidence, may not be valid for the Łeba Lower Werra Anhydrite basin.     

Morphology and mineralogy of weathering crusts on highly porous oolitic limestones, a case study from Budapest

Black crusts are very common on limestones in polluted urban environments, but white crusts are less frequently developed. On the soft, porous and inherently weak oolitic limestone of Budapest both crusts are frequent, and indeed white ones are more common on the stone walls of the studied fortress. In this paper, black and white crusts and the host rock have been described using morphological criteria, mineralogical analyses (XRD, DTA), elements analyses (microprobe) and micro-morphological (SEM) tests. The analyses have shown that on white crusts the surface dissolution is combined with the precipitation of gypsum and calcite in the pores and accumulation of gypsum on the underside of the crust. Thin white crusts are removed by a combination of salt crystallisation (gypsum) and frost action while very thick stone layers scale off due to freeze-thaw cycles. Black crusts are enriched in gypsum relative to white crusts. Gypsum accumulates on the crust surface and signs of dissolution have not been observed. Airborne particulates (flyash, silt-sized quartz, and organic debris) adhere to the crust surface of sheltered black crusts. These particles are later incorporated into the expanding gypsum crystals, that are visible on the underside of the crust. The host rock also contains gypsum, but it is washed off the surface when the crust is removed. Further exposure of the host rock may lead to the dissolution of calcite crystals as it is observed by SEM. The micro-environment influences the crust formation and adherence of the crusts. On frequently wet and dry surfaces crust removal is more common. The crust serves as a protective layer on the stone surface, but this protection is temporary since trigger mechanisms such as salt crystallisation or frost action can cause rapid surface loss.Special Issue: Stone decay hazards     

Geochemical and isotopic constraints on the interaction between saline lakes and groundwater in southeast Australia

Major ion and stable isotope geochemistry allow groundwater/surface-water interaction associated with saline to hypersaline lakes from the Willaura region of Australia to be understood. Ephemeral lakes lie above the water table and locally contain saline water (total dissolved solids, TDS, contents up to 119,000 mg/L). Saline lakes that lack halite crusts and which have Cl/Br ratios similar to local surface water and groundwater are throughflow lakes with high relative rates of groundwater outflows. Permanent hypersaline lakes contain brines with TDS contents of up to 280,000 mg/L and low Cl/Br ratios due to the formation of halite in evaporite crusts. These lakes are throughflow lakes with relatively low throughflow rates relative to evaporation or terminal discharge lakes. Variations in stable isotope and major ion geochemistry show that the hypersaline lakes undergo seasonal cycles of mineral dissolution and precipitation driven by the influx of surface water and evaporation. Despite the generation of highly saline brines in these lakes, leakage from the adjacent ephemeral lakes or saline throughflow lakes that lack evaporite crusts is mainly responsible for the high salinity of shallow groundwater in this region.     

Environmental and sequence stratigraphic implications of anhydrite textures: A case from the Lower Triassic of the Central Persian Gulf

The Lower Triassic Kangan Formation in the Persian Gulf (South Pars Gas Field) and its adjacent areas are composed of carbonate–evaporite sequences. These sediments were deposited in a shallow marine homoclinal ramp. Study of the anhydrite-bearing intervals shows various structures and textures. The anhydrite structures are mainly bedded, massive, chicken-wire and nodular type and the main textures are felted, sparse crystal, needle shape, lath shape, equant and fibrous. Pervasive and poikilotopic cement together with replacement and porphyroblastic gypsum are accounted as the most common diagenetic features in anhydrite. Evaluation of anhydrite occurrences and features support both primary and secondary formations. The nodular to chicken-wire anhydrite formed under synsedimentary sabkha conditions, whereas anhydrite cements occurred during the late stages of diagenesis (shallow burial stage). Massive to bedded anhydrite could have been formed under subaqueous conditions or originated by coalescing and continued growth of anhydrite nodules in the sabkha zone. Anhydrite fabrics impose a significant control on the reservoir quality of the Kangan carbonates at the South Pars Gas Field. Thick massive and bedded anhydrite could have been formed as an intraformational seals and anhydrite cements occluded pore spaces and reduced the poroperm values. The sequence stratigraphic analysis revealed two depositional sequences in the studied intervals, which are composed of TST and HST. Investigation of anhydrite throughout depositional sequences indicates a change in the content and style of anhydrite texture. Anhydrite content (volume) decreases upward through transgressive system tract (sea-level rise) whereas, it enhances during highstand system tract (sea-level fall). Pervasive and poikilotopic anhydrite cements together with replacement by anhydrite are prevalent features during transgressive and early highstand system tract. At the late HST, with a progradational stacking pattern, anhydrite value increases and felted, radial, equant, crystalline and mosaic texture are the most common anhydrite fabrics. Sequence boundaries that indicate maximum sea level fall and exposure of successions are marked by the broad anhydrite deposits with massive to bedded and chicken-wire structures and various textures that located in late HST package. There is an unambiguous relationship between the microfacies associations, the evaporite textures, and the sea-level fluctuations. This relationship could lead to a predictable pattern that can be of use as a general guide for the sequence stratigraphic interpretations in the area.     

Diagenetic evolution of Aptian evaporites in the Namibe Basin (south‐west Angola)

The widespread and dissected nature of the Angolan gypsiferous salt residuals offers a uniquely detailed view of the lateral and vertical relations inherent to secondary evaporite textures, which typify exhumed salt masses worldwide. Such secondary textures are sometimes misinterpreted as primary evaporite textures. Thin, metre‐scale and patchy, dome‐like gypsum accumulations are well‐exposed within strongly incised present‐day river valleys along the eastern margin of the Namibe and Benguela basins (south‐west Angola). These sections are time equivalent to the main basinward subsurface evaporites (Aptian Loeme Formation) which mostly consist of halite. The gypsum (here called the Bambata Formation) is interpreted to represent the final residual product of fractional dissolution and recrystallization of the halite mass that occurred during Late Cretaceous margin uplift and continues today. This halite underwent multiple episodes of diagenetic alteration between its deposition and its final exhumation, leading to the formation of various secondary gypsum fabrics and solution‐related karst and breccia textures that typify the current evaporite outcrop. Four different diagenetic gypsum fabrics are defined: thinly bedded alabastrine, nodular alabastrine, displacive selenite rosettes and fibrous satin‐spar gypsum. Current arid conditions are responsible for a thin weathered crust developed at the top of the outcropping gypsum, but the fabrics in the main core of the current at‐surface evaporite unit mostly formed during the telogenetic stage of uplift prior to complete subaerial exposure. Alteration occurred as various dissolving and rehydrating saline minerals encountered shallow aquifers in the active phreatic and vadose zones. Geomorphological and petrographic analyses, mostly based on the cross‐cutting relations and crystallographic patterns in the outcrop, are used to propose a sequence of formation of these different fabrics.     

四川渠县三叠系膏盐的同生、成岩、后生及表生变化

本文论述了四川渠县三叠系的膏盐在沉积后的不同阶段所发生的各种变化,并提出根据膏盐的变化特征推测它们的原生沉积条件、卤水咸化程度及研究区的矿床保存条件。