Mineralogy and composition of Kuroko deposits from northeastern Honshu and their possible modern analogues from the Izu-Ogasawara (Bonin) Arc south of Japan: Implications for mode of formation

The Kuroko deposits of NE Honshu are a key type deposit for the study of volcanogenic massive sulfide deposits. However, these deposits have not been studied in detail since the early 1980's and knowledge of their mode of formation is now dated. In this study, we present the analysis of 12 samples of the Kuroko deposits, 12 samples of submarine hydrothermal minerals from the Sunrise deposit and 6 samples from Suiyo Seamount, both of which are located on the Izu-Ogasawara (Bonin) Arc, for 27 elements. For the Kuroko deposit, Cd>Sb>Ag>Pb>Hg>As>Zn>Cu are highly enriched, Au>Te>Bi>Ba>Mo are moderately enriched, In>Tl are somewhat enriched and Fe is not significantly enriched relative to the average continental crust. Within each of these deposits, a similar pattern of element associations is apparent: Zn–Pb with As, Sb, Cd, Ag, Hg, Tl and Au; Fe–Cu–Ba with As, Sb, Ag, Tl, Mo, Te and Au; Si–Ba with Ag and Au; CaSO₄. The enrichment of the chalcophilic elements in these deposits is consistent with hydrothermal leaching of these elements from the host rocks which are dominantly rhyolite–dacite in the case of the Kuroko deposits, rhyolite in the case of the Sunrise deposit and dacite–rhyolite in the case of the Suiyo Seamount deposit. However, this pattern of element enrichment is also similar to that observed in fumarolic gas condensates from andesitic volcanoes. This suggests that there may be a significant magmatic contribution to the composition of the hydrothermal fluids responsible for the formation of the Kuroko deposits, although it is not yet possible to quantify the relative contributions of these two sources of elements.The compositional data show that Sunrise and Suiyo Seamount deposits are much closer compositionally to the Kuroko deposits from NE Honshu than are the submarine hydrothermal deposits from the JADE site in the Okinawa Trough which contain, on average, significantly higher concentrations of Pb, Zn, Sb, As and Ag than each of these deposits. In spite of the greater similarity in tectonic setting of the Hokuroku Basin in which the Kuroko deposits formed to the Okinawa Trough (intracontinental rifted back-arc basin) compared to Myojin Knoll and Suiyo Seamount (active arc volcanoes), it appears that submarine hydrothermal deposits from Myojin Knoll and Suiyo Seamount are closer analogues of the Kuroko deposit than are those from the Okinawa Trough. The present data are consistent with the magmatic hydrothermal model for the formation of Kuroko-type deposits as formulated by Urabe and Marumo [Urabe, T., Marumo, K., 1991. A new model for Kuroko-type deposits of Japan. Episodes 14, 246–251].     

Jusa and Barsuchi Log Volcanogenic Massive Sulfide Deposits from the Southern Urals of Russia: Devonian Analogs of the Kuroko Deposits of NE Honshu, Japan

Chemical analysis of 60 samples from the Jusa and Barsuchi Log volcanogenic massive sulfide (VMS) deposits by inductively coupled plasma–mass spectrometry shows that, on average, the Jusa deposit is more enriched in the chalcophilic elements than the Barsuchi Log deposit, whereas the Barsuchi Log deposit is more enriched in the lithogenous elements and Te. In addition, the yellow ores in these deposits are more enriched on average in Cu, As and Mo and the black ores more enriched in Zn, Ga, Cd, Sb, Ba , Hg and Pb relative to each other. Both these deposits are similar in composition to the Kuroko deposits of NE Honshu and may be considered to be analogs of these deposits. The Kuroko deposits, however, contain much higher concentrations of As, Ag, Sb, Ba, Hg and lower contents of Te on average than the Jusa and Barsuchi Log deposits. Based on the higher contents of Te in the Barsuchi Log deposit compared to the Jusa deposit, as well as on textural considerations, it is concluded that the Barsuchi Log deposit is intermediate between the Urals- and Kuroko-type deposits, whereas the Jusa deposit is more analogous to the Kuroko-type deposits. Based on the compositional data presented here, the Jusa and Barsuchi Log deposits may be described as Zn-Pb-Cu-Ba deposits rather than as Zn-Cu-Ba deposits, as the Baimak-type deposits of the west Magnitogrosk zone have previously been described.     

Submarine hydrothermal mineralization in the Okinawa Trough, SW of Japan: an overview

The Okinawa Trough is a heavily sedimented, rifted back-arc basin formed in an intracontinental rift zone. Submarine hydrothermal activity is located within the six back-arc rifts located in the middle and southern Okinawa Trough and its distribution is controlled principally by tectonic factors. Subduction of the Daito and Gagua Ridges beneath the Ryukyu Arc has resulted in fracturing of the brittle lithosphere beneath the Okinawa Trough. Hydrothermal activity is strongest in the volcanic arc-rift migration phenomenon (VAMP) area plus the JADE site and Southernmost Part of the Okinawa Trough (SPOT) area which form the prolongation of these two ridges. These areas are characterized by extremely high heat flow locally. Submarine hydrothermal fluids from the Okinawa Trough tend to be strongly influenced by interaction of the hydrothermal fluids with organic matter in the sediment resulting in high alkalinity and NH₄⁺ concentrations of the fluids. The fluids also contain high concentrations of CO₂ of magmatic origin. Submarine hydrothermal mineralization in the trough is diverse. The CLAM site consists principally of carbonate chimneys. Interaction of the hydrothermal fluid with organic matter in the sediment is particularly strong at this site. This is most probably a sediment-hosted deposit in which sulphide minerals have deposited within the sediment column leaving ‘spent ore-fluids’ to emerge at the seafloor. The JADE site consists of active and inactive sulphide–sulphate chimneys and mounds. The Zn–Pb-rich sulphides at this site contain the highest concentrations of Pb, Ag and Au so far recorded in submarine hydrothermal sulphide deposits. At Minami-Ensei Knoll and Hatoma Knoll, active and inactive chimneys consist principally of anhydrite and barite as a result of phase separation of the hydrothermal fluids beneath the seafloor. An intense black smoker has recently been discovered at Yonaguni Knoll in the SPOT area. If it is confirmed that sulphide mineralization is dominant at this site, this could be a highly prospective area. The most prospective areas for economic-grade minerals in the Okinawa Trough appear to be the JADE site and the SPOT area.     

Distribution Patterns of Ag in Hydrothermal Precipitates from the Okinawa Trough

The Okinawa Trough is characterized by enrichment of Ag in hydrothermal precipitates; however, the distribution of this enrichment remains poorly constrained. This study presents the results of a field-emission scanning electron microscopy and electron-microprobe analysis based mineralogical and geochemical investigation of the spatial distribution of Ag within Ag-rich sulfide samples from the Okinawa Trough. The tetrahedrite, covellite, and galena in these samples contain high concentrations of Ag(average values of 1.60, 0.78, and 0.23 wt%, respectively) and also various Ag sulfosalts. Examination of the Ag budget of these samples indicates that most of the Ag is hosted by tetrahedrite followed by galena. The Ag within tetrahedrite is incorporated by substitution into the Cu site, whereas galena becomes Ag-enriched by the coupled incorporation of monovalent Ag, Tl, and Cu, and trivalent Sb and Bi into Pb lattice sites. Tetrahedrite and galena containing higher concentrations of Sb favor increased Ag substitution. Four sets of Ag host minerals are identified with distinct ore formation temperatures. Tetrahedrite and galena concentrate the majority of Ag at medium temperatures(150–300°C). Other Ag host minerals concentrate only minor or trace amounts of Ag, including massive sphalerite, chalcopyrite, and pyrite at high temperatures(300°C), colloform pyrite and sphalerite at low temperatures(150°C), and Ag-sulfosalts at even lower temperatures(100°C).     

古代与现代海底黑矿型块状硫化物矿床矿石地球化学比较研究

选择西南太平洋冲绳海槽现代海底烟囱硫化物矿床、日本小坂矿山上向黑矿（第三纪）和中国西南呷村黑矿型矿床（三叠纪）进行了矿石地球化学比较研究。黑矿型矿床矿石吨位－品位模式与其他火山成因块状硫化物（ＶＭＳ）矿床类似，矿田（２０－５０ｋｍ＾２）矿石吨位与单个喷气－沉积型（Ｓｅｄｅｘ）矿床相当，金属总量４－６Ｍｔ，为矿田范围内热液流体搬运的最大金属量。与洋脊环境ＶＭＳ矿床相比，岛弧裂谷环境产出的黑矿型矿床相     

Further Occurrence of Brown Ores in Kuroko-type Deposits in Japan

Abstract: The occurrence of so-called brown ore from the Kuroko-type deposits in Japan was examined. Brown ore specimens from the Kannondo, Inarizawa, Matsumine, Fukazawa, Uchinotai, Kosaka (orebody unknown) and Nurukawa deposits have been found in the ore collection stored by Dowa Mining Co. Ltd. and the subsidiary companies. In addition, occurrences from the Fukazawa, Matsumine, Ezuri, Shakanai, and Ginzan deposits were previously reported. The brown ore is characterized by its color and by its higher Ag concentration (up to around 2,400 g/t) than ordinary black ores. This type of ore occurs commonly in the Kuroko-type deposits in Japan, whereas its extent is limited. The brown ore is a type of Au-rich massive sulfide ore formed in submarine hydrothermal system.     

Exploration Indices and Mineral Potential Map of the Kuroko Deposits in Northeast Japan

Abstract. Recent discoveries of seafloor hydrothermal mineralization in submarine volcanic centers of felsic magma in western Pacific island arcs are regarded as modern analogues of Kuroko type deposits. Studies of these deposits and their surrounding geology raised question whether the exploration activity for the Kuroko deposits on land which peaked in the 1960's was adequate or not. However, such an evaluation is not easy because the exploration data are about to be lost as a result of the closure of all the Kuroko mines in the area since 1994.
The Metal Mining Agency of Japan (MMAJ), therefore, decided to compile existing data on about 180 Kuroko deposits and related mineral occurrences in northeast Japan as a new Kuroko database.
This study extends a concept called "exploration indices" which was developed based on a case study of the thoroughly surveyed Hokuroku district to draw a potential map of the Kuroko occurrences for the entire northeast Japan quantitatively with a Geographical Information System (GIS). Effective exploration indices include: 1) distribution of dacitic-rhy-olitic submarine volcanic rocks of the Nishikurosawa and Onnagawa stages, 2) distribution of intrusive rocks of pre- and post-Kuroko horizon, 3) low aeromagnetic anomaly caused by hydrothermal alteration of magnetite, 4) low gravity anomaly which suggests depressions in the basement rocks such as a tectonic basin and/or caldera, and 5) nearby existence of vein type deposits. It is concluded that about 33 % of known Kuroko deposits fall within the high potential zone (score=4 and 5) that occupies only 4 % of the entire northeast Japan arc. The Kuroko potential map is, therefore, useful for limiting the target area for Kuroko type deposits in an island arc setting.     

Whole-rock and sulfide lead-isotope data from the hydrothermal JADE field in the Okinawa back-arc trough

The mineralization of the active hydrothermal JADE field resembles in many aspects the Kuroko-type mineralization. The JADE field is located in a back-arc graben and is associated with a bimodal volcanism. Lead isotope data from igneous rocks, sediments, and ores further emphasize the similarities with the Kuroko ores and suggest that both sediments and volcanic rocks contributed comparable amounts of lead to the deposit. When compared to the sediments, a much larger volume of volcanic rocks must have contributed lead to the deposit, because of the considerably lower lead concentration of volcanic rocks. In contrast to the crustal type lead of the JADE field and the Kuroko-type sulfide deposits the lead isotope signatures of VMS-type deposits at mid-ocean ridges is distinctly different. In the absence of a sedimentary cover it reflects the composition of the mantle source, whereas in the presence of a sedimentary cover it is either a mixture of mantle and sedimentary lead or it may even be completely dominated by the latter. Received: 5 October 1995 / Accepted: 10 May 1996     

Supergene sulphides and related minerals in the supergene profiles of VHMS deposits from the South Urals

The mineralogy and structure of the supergene profile in recently-exploited volcaniс hosted massive sulphide (VHMS) deposits of Cyprus, Uralian and Kuroko type in the South Urals, Russia, have been studied. Specific subzones enriched in secondary sulphides and associated minerals have been distinguished in residual pyrite and quartz–pyrite sands at the Gayskoye, Zapadno-Ozernoye, Dzhusinskoye and Alexandrinskoye deposits. Besides minerals which are common to the cementation subzones (covellite, chalcocite and acanthite), non-stoichiometric colloform and framboidal pyrite, pyrite–dzharkenite, pyrrhotite-like and jordanite-like minerals, metacinnabar, sphalerite, selenium-enriched tetrahedrite and unidentified As-, Sb sulphosalts of Pb or Hg and Ag, sulphur-bearing clausthalite, naumannite and tiemannite were also found. Secondary sulphide minerals in VHMS deposits of the South Urals region are characterized by light sulphur isotope compositions (− 8.1 to − 17.2‰). Superposition of the advanced oxidation of colloform pyrite, an enrichment in impurities (sphalerite, galena, and tennantite) from the primary ores, stagnant water conditions, an elevation of the water table during oxidation, and bacterial activity led to supergene concentrations of the base metals as sulphide, selenides or sulphosalts.     

Interpretation of Mineral Zoning in Submarine Hydrothermal Ore Deposits in Terms of Coupled Fluid Flow‐Precipitation Kinetics Model

Major minerals (sulfates, sulfides, quartz) are distributed in different parts of submarine hydrothermal ore deposits. For instance, the abundance of barite increases stratigraphically upwards in the massive orebodies of the Kuroko deposits (black and yellow ores), while quartz is abundant in the lower parts (siliceous ore). The different distribution of barite and quartz in the Kuroko deposits can not be accounted for by thermochemical equilibrium calculations based on the precipitation due to mixing of ascending hydrothermal solutions with ambient cold seawater. In the present study, a coupled fluid flow‐precipitation kinetics model was used to calculate the amounts of quartz, barite, and anhydrite precipitated from a hydrothermal solution mixed with seawater, assuming reasonable values for temperature, precipitation rate, fluid flow velocity, mineral surface area/fluid mass ratio (A/M), and initial concentrations of hydrothermal solution and seawater before mixing occurred. The results indicate that barite precipitates more efficiently than quartz from discharging fluids with relatively higher flow velocity, lower temperatures and under the condition of lower A/M ratios on the seafloor (black ore), whereas quartz precipitates more effectively from solutions with lower flow velocity, higher temperatures and higher A/M ratios beneath the seafloor (siliceous ore) and in the orebody (barite ore, ferruginous chert ore). Anhydrite precipitates in shallow sub‐seafloor environments with lower precipitation rates and higher A/M ratios than barite and higher precipitation rates and lower A/M ratios than quartz. These results explain the observed occurrences of barite, anhydrite, and quartz in the Kuroko deposits. Namely, barite is abundant in black ore and barite ore which formed above the seafloor, anhydrite formed in high‐permeability tuff breccias, and quartz formed in low permeability dacite intrusive bodies in the sub‐seafloor environment.     

Nature, diversity of deposit types and metallogenic relations of South China

The South China Region is rich in mineral resources and has a wide diversity of deposit types. The region has undergone multiple tectonic and magmatic events and related metallogenic processes throughout the earth history. These tectonic and metallogenic processes were responsible for the formation of the diverse styles of base and precious metal deposits in South China making it one of the resource-rich regions in the world. During the Proterozoic, the South China Craton was characterised by rifting of continental margin before eruption of submarine volcanics and development of platform carbonate rocks, and the formation of VHMS, stratabound copper and MVT deposits. The Phanerozoic metallogeny of South China was related to opening and closing of the Tethyan Ocean involving multiple orogenies by subduction, back-arc rifting, arc–continent collision and post-collisional extension during the Indosinian (Triassic), Yanshanian (Jurassic to Cretaceous) and Himalayan (Tertiary) Orogenies. The Late Palaeozoic was a productive metallogenic period for South China resulting from break-up and rifting of Gondwana. Significant stratabound base and precious metal deposits were formed during the Devonian and Carboniferous (e.g., Fankou and Dabaoshan deposits). These Late Palaeozoic SEDEX-style deposits have been often overprinted by skarn systems associated with Yanshanian magmatism (e.g., Chengmenshan, Dongguashan and Qixiashan). A number of Late Palaeozoic to Early Mesozoic VHMS deposits also developed in the Sanjiang fold belt in the western part of South China (e.g., Laochang and Gacun).South China has significant sedimentary rock-hosted Carlin-like deposits, which occur in the Devonian- to Triassic-aged accretionary wedge or rift basins at the margin of the South China Craton. They are present in a region at the junction of Yunnan, Guizhou, and Guangxi Provinces called the ‘Southern Golden Triangle’, and are also present in NW Sichuan, Gansu and Shaanxi, in an area known as the ‘Northern Golden Triangle’ of China. These deposits are mostly epigenetic hydrothermal micron-disseminated gold deposits with associated As, Hg, Sb + Tl mineralisation similar to Carlin-type deposits in USA. The important deposits in the Southern Golden Triangle are Jinfeng (Lannigou), Zimudang, Getang, Yata and Banqi in Guizhou Province, and the Jinya and Gaolong deposits in Guangxi District. The most important deposits in the Northern Golden Triangle are the Dongbeizhai and Qiaoqiaoshang deposits.Many porphyry-related polymetallic copper–lead–zinc and gold skarn deposits occur in South China. These deposits are related to Indosinian (Triassic) and Yanshanian (Jurassic to Cretaceous) magmatism associated with collision of the South China and North China Cratons and westward subduction of the Palaeo-Pacific Plate. Most of these deposits are distributed along the Lower to Middle Yangtze River metallogenic belt. The most significant deposits are Tonglushan, Jilongshan, Fengshandong, Shitouzui and Jiguanzui. Au–(Ag–Mo)-rich porphyry-related Cu–Fe skarn deposits are also present (Chengmenshan and Wushan in Jiangxi Province and Xinqiao, Mashan-Tianmashan, Shizishan and Huangshilaoshan in Anhui Province). The South China fold belt extending from Fujian to Zhejiang Provinces is characterised by well-developed Yanshanian intrusive to subvolcanic rocks associated with porphyry to epithermal type mineralisation and mesothermal vein deposits. The largest porphyry copper deposit in China, Dexing, occurs in Jiangxi Province and is hosted by Yanshanian granodiorite. The high-sulphidation epithermal system occurs at the Zijinshan district in Fujian Province and epithermal to mesothermal vein-type deposits are also found in the Zhejiang Province (e.g., Zhilingtou). Part of Shandong Province is located at the northern margin of the South China Craton and the province has unique world class granite-hosted orogenic gold deposits. Occurrences of Pt–Pd–Ni–Cu–Co are found in Permian-aged Emeishan continental flood basalt (ECFB) in South China (Jinbaoshan and Baimazhai in Yunnan Province and Yangliuping in Sichuan Province). South China also has major vein-type tungsten–tin–bismuth–beryllium–sulphide and REE deposits associated with Yanshanian magmatism (e.g., Shizhuyuan and Xihuashan), important world class stratabound base metal–tin deposits (Dachang deposit), and the large antimony deposits (Xikuangshan and Woxi). During the Himalayan Orogeny, many giant deposits were formed in South China including the recently emerging Yulong and Gangdese porphyry copper belts in Tibet and the Ailaoshan orogenic gold deposits in Yunnan.     

Jusa and Barsuchi Log Volcanogenic Massive Sulfide Deposits from the Southern Urals of Russia: Tectonic Setting, Structure and Mode of Formation

The Jusa and Barsuchi Log volcanogenic massive sulfide (VMS) deposits formed along a paleo island arc in the east Magnitogrosk zone of the Southern Urals between ca 398 and 390 Ma. By analogy with the VMS deposits of the west Magnitogrosk zone, they are considered to be Baimak type deposits, which are Zn‐Cu‐Ba deposits containing Au, Ag and minor Pb. Detailed mapping and textural analysis of the two deposits shows that they formed as submarine hydrothermal mounds which were subsequently destroyed on the sea floor under the influence of ocean bottom currents and slumping. Both deposits display a ratio of the length to the maximum width of the deposit >15 and are characterized by ribbon‐like layers composed mainly of bedded ore and consisting principally of altered fine clastic ore facies. The Jusa deposit appears to have formed in two stages: deposition of colloform pyrite followed by deposition of copper–zinc–lead sulfides characterized by the close association of pyrite, chalcopyrite, sphalerite, galena, tennantite, arsenopyrite, marcasite, pyrrhotite, bornite, native gold and electrum and high concentrations of gold and silver. The low metamorphic grade of the east Magnitogorsk zone accounts for the exceptional degree of preservation of these deposits.     

Chimneys in Paleozoic massive sulfide mounds of the Urals VMS deposits: Mineral and trace element comparison with modern black,grey, white and clear smokers

In the Urals, a wide range of well-preserved chimneys are found in VMS deposits, which are associated with ultramafic (Atlantic type: Dergamysh), mafic (Cyprus type: Buribay), bimodal mafic (Uralian type: Yubileynoye, Sultanovskoye, Yaman-Kasy, Molodezhnoye, Uzelga-4, Valentorskoye) and bimodal felsic (Kuroko or Baymak type: Oktyabrskoye, Tash-Tau, Uselga-1, Talgan, Alexandrinskoye) sequences. Chimneys have also been found in the Safyanovskoye deposit (Altay type) that is hosted by intercalated felsic lavas and carbonaceous shales. A combination of geological, mineralogical and trace element data provide a general outline for comparison between chimneys from the Urals deposits and modern vent sites. The chimneys from the Dergamysh deposit show a broad affinity with those from the Rainbow and other vent sites associated with serpentinites of the Mid-Atlantic Ridge. The chimneys from the Buribay deposit are similar to the black smokers of the EPR vent sites including the scarcity of rare minerals. The chimneys from the Urals type of the VMS deposits show some similarities with grey smokers from the Brother Volcano and PACMANUS sites. The chimneys from the Baymak type of the VMS deposits resemble grey and white smokers of the PACMANUS and grey smokers of the Suiyo vent sites. The chimneys from the Safyanovskoye deposit are similar to the black and clear smokers from the Okinawa Trough. Mineral assemblages are controlled by the combination of host rock composition and physico-chemical conditions of the ore-forming processes. Amount of colloform pyrite, isocubanite and pseudomorphic pyrite and marcasite after pyrrhotite decreases in the chimneys across the range from ultramafic and mafic to felsic-hosted deposits and is concomitant with increase in the contents of sphalerite, galena, bornite, fahlores, native gold and barite across this range. The chimneys from the Urals type contain abundant tellurides and sulfoarsenides, while these minerals are rare (except for hessite) in the Baymak type deposits. In the same range, the buffering capacity of host rocks decreases in contrast to the increase in ƒS₂ and ƒO₂. With the exception of the Safyanovskoye deposit, trace element assemblages in chalcopyrite vary to reflect the host rock: ultramafic (high Se, Sn, Co, Ni, Ag and Au) → mafic (high Co, Se, Mo and low Bi, Au and Pb) → bimodal mafic (high Te, Au, Ag, Bi, Pb, Co, moderate Se, and variable As and Sb) → bimodal felsic (high As, Sb, Mo, Pb, moderate Bi, and low Co, Te and Se). In sphalerite of the same range, the contents of Bi, Pb, Ag, Au and Sb increase versus Fe, Se and Сo. The variations in trace elements in colloform pyrite coincide with these changes. The specific mineral changes in the local ranges from Cu- to Zn-rich chimneys in each VMS deposit are similar to the general changes in the range of host rock classes of the deposits. However, the local T, ƒS₂ and ƒO₂ changes can broadly be interpreted in terms of contribution of variable oxygenated cold seawater to the subseafloor and seafloor hydrothermal processes.     

西太平洋冲绳海槽烟囱硫化物矿床矿石化学特征与分带型式

西太平洋冲绳海槽烟囱式硫化物矿床分布于琉球弧后扩张盆地、产于尹是名洼陷盆地（深１４００ｍ），其特征与日本黑矿类似。硫化物矿石及烟囱主要有３种化学类型：Ｐｂ－Ｚｎ－Ｂａ型、Ｚｎ－Ｐｂ型和Ｃｕ－Ｚｎ型，三者分别代表温度不断升高的热液体系的早、中、晚３个成矿阶段产物，其中，Ｐｂ－Ｚｎ－Ｂａ矿石及烟囱形成于高ｆｏ２环境和高流速、低温、富Ｐｂ、Ｚｎ、Ｂａ热液体系，Ｃｕ－Ｚｎ矿石及烟囱形成于低流速、高温、富Ｃｕ热液体系，Ｚｎ－Ｐｂ矿石则介于其间。硫化物烟囱显示明显的矿物－化学分带。在Ｐｂ－Ｚｎ－Ｂａ矿石（烟囱），Ｚｎ、Ｃｄ集中于烟囱中央，Ｂａ、Ｆｅ、Ａｓ、Ｓｂ、Ａｇ、Ｐｂ集中于烟囱外带，Ｃｕ则富集于烟囱中外部。在Ｃｕ－Ｚｎ矿石，Ａｓ、Ｓｂ、Ｆｅ、Ａｇ、Ａｕ仍富集于烟囱外带，Ｃｕ、Ｚｎ、Ｐｂ则在烟囱中央富集。依此元素化学分带型式，建立了古代黑矿硫化物矿体分带与硫化物堆积模式。     

云南墨江金矿热水喷流沉积成岩成矿的地质地球化学证据

在墨江金矿区发现了两个热水喷流沉积旋回，赋矿地层烂山段出露的硅质岩和（黄铁矿）硫化物岩具有低TiO2,Al2O3和富含As,Sb,Au,Ag,Hg含量特征，稀土元素具有总量低，轻稀土总量高于重稀土特征，其球粒陨石标准化模式为向右倾曲线，大多数样品具有负Eu异常；而其北美页岩标准化曲线向左倾，在SiO2-Al2O3,Al-Fe-Mn和Al2O3-TFeO-CaO等地球化学图解上，大多数样品位于热水沉积区，当样品中含有火山角砾成分时偏离热水沉积区，研究表明硅质岩和（黄铁矿）硫化物岩主要由热水喷流沉积形成的，再结合矿床地质特征，认为墨江金矿存在早期热水喷流沉积成岩成矿作用，形成了矿化或低品位矿石，并可能与下伏火山喷发有关，这为墨江金矿的成因研究和进一步找矿开辟新的思路。     

Actively forming Kuroko-type volcanic-hosted massive sulfide (VHMS) mineralization at Iheya North,Okinawa Trough,Japan

Modern seafloor hydrothermal systems provide important insights into the formation and discovery of ancient volcanic-hosted massive sulfide (VHMS) deposits. In 2010, Integrated Ocean Drilling Program (IODP) Expedition 331 drilled five sites in the Iheya North hydrothermal field in the middle Okinawa Trough back-arc basin, Japan. Hydrothermal alteration and sulfide mineralization is hosted in a geologically complex, mixed sequence of coarse pumiceous volcaniclastic and fine hemipelagic sediments, overlying a dacitic to rhyolitic volcanic substrate. At site C0016, located adjacent to the foot of the actively venting North Big Chimney massive sulfide mound, massive sphalerite-(pyrite-chalcopyrite ± galena)-rich sulfides were intersected (to 30.2% Zn, 12.3% Pb, 2.68% Cu, 33.1 ppm Ag and 0.07 ppm Au) that strongly resemble the black ore of the Miocene-age Kuroko deposits of Japan. Sulfide mineralization shows clear evidence of formation through a combination of surface detrital and subsurface chemical processes, with at least some sphalerite precipitating into void space in the rock. Volcanic rocks beneath massive sulfides exhibit quartz-muscovite/illite and quartz-Mg-chlorite alteration reminiscent of VHMS proximal footwall alteration associated with Kuroko-type deposits, characterized by increasing MgO, Fe/Zn and Cu/Zn with depth. Recovered felsic footwall rocks are of FII to FIII affinity with well-developed negative Eu anomalies, consistent with VHMS-hosting felsic rocks in Phanerozoic ensialic arc/back-arc settings worldwide.Site C0013, ∼100 m east of North Big Chimney, represents a likely location of recent high temperature discharge, preserved as surficial coarse-grained sulfidic sediments (43.2% Zn, 4.4% Pb, 5.4% Cu, 42 ppm Ag and 0.02 ppm Au) containing high concentrations of As, Cd, Mo, Sb, and W. Near surface hydrothermal alteration is dominated by kaolinite and muscovite with locally abundant native sulfur, indicative of acidic hydrothermal fluids. Alteration grades to Mg-chlorite dominated assemblages at depths of >5 mbsf (metres below sea floor). Late coarse-grained anhydrite veining overprints earlier alteration and is interpreted to have precipitated from down welling seawater as hydrothermal activity waned. At site C0014, ∼350 m farther east, hydrothermal assemblages are characterized by illite/montmorillonite, with Mg-chlorite present at depths below ∼30 mbsf. Recovered lithologies from distal, recharge site C0017 are unaltered, with low MgO, Fe₂O₃ and base metal concentrations.Mineralization and alteration assemblages are consistent with the Iheya North system representing a modern analogue for Kuroko-type VHMS mineralization. Fluid flow is focussed laterally along pumiceous volcaniclastic strata (compartmentalized between impermeable hemipelagic sediments), and vertically along faults. The abundance of Fe-poor sphalerite and Mg-rich chlorite (clinochlore/penninite) is consistent with the lower Fe budget, temperature and higher oxidation state of felsic volcanic-hosted hydrothermal systems worldwide compared to Mid Ocean Ridge black smoker systems.     

Unique Origin of Skarn at the Ohori Base Metal Deposit,Yamagata Prefecture,NE Japan: C,O and S Isotopic Study

The Ohori ore deposit is one of the Cu–Pb–Zn deposits in the Green Tuff region, NE Japan, and consists of skarn‐type (Kaninomata) and vein‐type (Nakanomata) orebodies. The former has a unique origin because its original calcareous rocks were made by hydrothermal precipitation during Miocene submarine volcanism. Carbon and oxygen isotope ratios of skarn calcite and sulfur isotope ratios of sulfides were measured in and around the deposit. Carbon and oxygen isotope ratios of the skarn calcite are δ¹³C = ?15.51 to ?5.1‰, δ¹⁸O = +3.6 to +22.5‰. δ¹³C values are slightly lower than those of the Cretaceous skarn deposits in Japan. These isotope ratios of the Kaninomata skarn show that the original calcareous rocks resemble the present submarine hydrothermal carbonates at the CLAM Site, Okinawa Trough, than Cenozoic limestones, even though some isotopic shifts had occurred during later skarnization. δ³⁴S ratios of the sulfide minerals from the Kaninomata and Nakanomata orebodies are mostly in a narrow range of +4.0 to +7.0‰ and they resemble each other, suggesting the same sulfur origin for the both deposits. The magnetite‐series Tertiary Kaninomatasawa granite is distributed just beneath the skarn layer and has δ³⁴S ratios of +7.5 to 8.1‰. The heavy sulfur isotope ratio of the skarn sulfides may have been affected by the Kaninomatasawa granite.     

Comparison between magmatic activity and gold mineralization at Conical Seamount and Lihir Island, Papua New Guinea

Summary Grab samples from the submarine Conical Seamount, located about 10km south of the giant Ladolam gold deposit, Lihir Island, reveal the highest gold concentrations yet reported from the modern seafloor. Lavas from Conical Seamount are characterized by high K₂O contents, high K₂O/Na₂O ratios, and high Ce/Yb ratios, which are typical of high-K igneous rocks from oceanic (island) arc-settings. The primitive character of the rocks from Conical Seamount implies a magmatic evolution related to a single eruptive phase, which contrasts with the more evolved rocks forming Lihir Island. Geochemical as well as mineral chemical data suggest that the melts from both Conical Seamount and Lihir Island originate from the same magma source. In common with the samples from Lihir Island, elevated oxygen fugacities of 0.7–2.5log units above the FMQ buffer are recorded from the Conical Seamount lavas.There are distinct differences between the mineralization styles at Conical Seamount and at the Ladolam gold deposit, Lihir Island. While early-stage pyritic stockwork mineralization at Conical Seamount is hosted by clay-silica altered basaltic rocks with local alunite±kaolinite alteration, main-stage Au-mineralization occurs in sericite-alkali feldspar altered polymetallic sulfide-bearing siliceous veins. By contrast, early-stage pyritic stockwork mineralization at Ladolam is restricted to biotite–magnetite ± silica-altered monzodiorite, while the main-stage bulk-tonnage mineralization occurs as auriferous pyrite-bearing hydrothermal breccias which, in places, are cut by quartz–chalcedony–illite–adularia–pyrite±marcasite veins containing isolated bonanza gold grades.     

Metallogenesis of the Carajás Mineral Province, Southern Amazon Craton, Brazil: Varying styles of Archean through Paleoproterozoic to Neoproterozoic base- and precious-metal mineralisation

The Itacaiúnas Belt of the highly mineralised Carajás Mineral Province comprises ca. 2.75 Ga volcanic rocks overlain by sedimentary sequences of ca. 2.68 Ga age, that represent an intracratonic basin rather than a greenstone belt. Rocks are generally at low strain and low metamorphic grade, but are often highly deformed and at amphibolite facies grade adjacent to the Cinzento Strike Slip System. The Province has been long recognised for its giant enriched iron and manganese deposits, but over the past 20 years has been increasingly acknowledged as one of the most important Cu–Au and Au–PGE provinces globally, with deposits extending along an approximately 150 km long WNW-trending zone about 60 km wide centred on the Carajás Fault. The larger deposits (approx. 200–1000 Mt @ 0.95–1.4% Cu and 0.3–0.85 g/t Au) are classic Fe-oxide Cu–Au deposits that include Salobo, Igarapé Bahia–Alemão, Cristalino and Sossego. They are largely hosted in the lower volcanic sequences and basement gneisses as pipe- or ring-like mineralised, generally breccia bodies that are strongly Fe- and LREE-enriched, commonly with anomalous Co and U, and quartz- and sulfur-deficient. Iron oxides and Fe-rich carbonates and/or silicates are invariably present. Rhenium–Os dating of molybdenite at Salobo and SHRIMP Pb–Pb dating of hydrothermal monazite at Igarapé-Bahia indicate ages of ca. 2.57 Ga for mineralisation, indistinguishable from ages of poorly-exposed Archean alkalic and A-type intrusions in the Itacaiúnas Belt, strongly implicating a deep magmatic connection.A group of smaller, commonly supergene-enriched Cu–Au deposits (generally < 50 Mt @ < 2% Cu and < 1 g/t Au in hypogene ore), with enrichment in granitophile elements such as W, Sn and Bi, spatially overlap the Archean Fe-oxide Cu–Au deposits. These include the Breves, Águas Claras, Gameleira and Estrela deposits which are largely hosted by the upper sedimentary sequence as greisen-to ring-like or stockwork bodies. They generally lack abundant Fe-oxides, are quartz-bearing and contain more S-rich Cu–Fe sulfides than the Fe-oxide Cu–Au deposits, although Cento e Dezoito (118) appears to be a transitional type of deposit. Precise Pb–Pb in hydrothermal phosphate dating of the Breves and Cento e Dezoito deposits indicate ages of 1872 ± 7 Ma and 1868 ± 7 Ma, respectively, indistinguishable from Pb–Pb ages of zircons from adjacent A-type granites and associated dykes which range from 1874 ± 2 Ma to 1883 ± 2 Ma, with 1878 ± 8 Ma the age of intrusions at Breves. An unpublished Ar/Ar age for hydrothermal biotite at Estrela is indistinguishable, and a Sm–Nd isochron age for Gameleira is also similar, although somewhat younger. The geochronological data, combined with geological constraints and ore-element associations, strongly implicate a magmatic connection for these deposits.The highly anomalous, hydrothermal Serra Pelada Au–PGE deposit lies at the north-eastern edge of the Province within the same fault corridor as the Archean and Paleoproterozoic Cu–Au deposits, and like the Cu–Au deposits is LREE enriched. It appears to have formed from highly oxidising ore fluids that were neutralised by dolomites and reduced by carbonaceous shales in the upper sedimentary succession within the hinge of a reclined synform. The imprecise Pb–Pb in hydrothermal phosphate age of 1861 ± 45 Ma, combined with an Ar/Ar age of hydrothermal biotite of 1882 ± 3 Ma, are indistinguishable from a Pb–Pb in zircon age of 1883 ± 2 Ma for the adjacent Cigano A-type granite and indistinguishable from the age of the Paleoproterozoic Cu–Au deposits. Again a magmatic connection is indicated, particularly as there is no other credible heat or fluid source at that time.Finally, there is minor Au–(Cu) mineralisation associated with the Formiga Granite whose age is probably ca. 600 Ma, although there is little new zircon growth during crystallisation of the granite. This granite is probably related to the adjacent Neoproterozoic (900–600 Ma) Araguaia Fold Belt, formed as part of the Brasiliano Orogeny.Thus, there are two major and one minor period of Cu–Au mineralisation in the Carajás Mineral Province. The two major events display strong REE enrichment and strongly enhanced LREE. There is a trend from strongly Fe-rich, low-SiO₂ and low-S deposits to quartz-bearing and more S-rich systems with time. There cannot be significant connate or basinal fluid (commonly invoked in the genesis of Fe-oxide Cu–Au deposits) involved as all host rocks were metamorphosed well before mineralisation: some host rocks are at mid- to high-amphibolite facies. The two major periods of mineralisation correspond to two periods of alkalic to A-type magmatism at ca. 2.57 Ga and ca. 1.88 Ga, and a magmatic association is compelling.The giant to world-class late Archean Fe-oxide Cu–Au deposits show the least obvious association with deep-seated alkaline bodies as shown at Palabora, South Africa, and implied at Olympic Dam, South Australia. The smaller Paleoproterozoic Cu–Au–W–Sn–Bi deposits and Au–PGE deposit show a more obvious relationship to more fractionated A-type granites, and the Neoproterozoic Au–(Cu) deposit to crustally-derived magmas. The available data suggest that magmas and ore fluids were derived from long-lived metasomatised lithosphere and lower crust beneath the eastern margin of the Amazon Craton in a tectonic setting similar to that of other large Precambrian Fe-oxide Cu–Au deposits.     

论华南喷流—沉积块状硫化物矿床

现代海底喷流－沉积硫化物矿床的发现极大地推动了海底热液成矿理论的发展,也大大地提高了对古代海底喷流块充化物矿术的研究水平。本文指出喷流－沉积是重要的成矿作用,提出喷流－沉积矿床是华南Ｃｕ、Ｐｂ、Ｚｎ、Ｓｎ、Ａｇ、Ａｕ等矿产资源的重要来源,形成了一批超大型矿床,并将华南许多曾被认为属夕卡岩矿床重新确认为喷流－沉积岩床。文章还论述了华南喷流－沉积块状硫化物矿床的特征、分类、时空分布及其成矿特点等问题,提出断裂拗陷带型喷流－沉积块状硫化物矿床是华南具有特色的类型,而陆相断陷盆地中喷流－沉积矿床值得进一步深入研究。