Radarclinometry of the sand seas of Africa’s Namibia and Saturn’s moon Titan

Radarclinometry is a powerful technique for estimating heights of landforms in synthetic aperture radar (SAR) images of planetary surfaces. In particular, it has been used to estimate heights of dunes in the sand seas of Saturn’s moon Titan (Lorenz, R.D., and 39 colleagues [2006]. Science 312, 724-727). In this work, we verify the technique by comparing dune heights derived from radarclinometry to known topography of dune fields in the Namib sand sea of western Africa. We compared results from three different image grid spacings, and found that 350 m/pixel (the same spacing at which the Cassini RADAR data was processed) is sufficient to determine dune height for dunes of similar morphometry to those of the Namib sand sea. At this grid spacing, height estimates derived from radarclinometry are largely representative of, though may underestimate by as much as 30%, or overestimate by as much as 40%, true dune height. Applying the technique to three regions on Titan, we estimate dune heights of 45-180 m, and dune spacings of 2.3-3.3 km. Obtaining accurate heights of Titan’s dunes will help to constrain the total organic inventory on Titan.     

A half-century of terrestrial analog studies: From craters on the Moon to searching for life on Mars

Terrestrial analogs to the Moon and Mars have been used to advance knowledge in planetary science for over a half-century. They are useful in studies of comparative geology of the terrestrial planets and rocky moons, in astronaut training and testing of exploration technologies, and in developing hypotheses and exploration strategies in astrobiology. In fact, the use of terrestrial analogs can be traced back to the origins of comparative geology and astrobiology, and to the early phases of the Apollo astronaut program. Terrestrial analog studies feature prominently throughout the history of both NASA and the USGS’ Astrogeology Research Program. In light of current international plans for a return missions to the Moon, and eventually to send sample return and manned missions to Mars, as well as the recent creation of various analog research and development programs, this historical perspective is timely.     

Meteorites from the Lut Desert (Iran)

We present for the first time a detailed report on the discovery of a new meteorite collection region in the Lut Desert, eastern–southeastern Iran, describing its geological, morphological, and climatic setting. Our search campaigns, alongside with the activity of meteorite hunters, yielded >200 meteorite finds. Here, we report on their classification, spatial distribution, and terrestrial weathering. All the collected meteorites are ordinary chondrites (OCs). The most abundant by far are the highly weathered paired H5 distributed in the northwest of Kalut area (central Lut, Kerman dense collection area). The second are well‐preserved paired L5 also found in Kalut region. A detailed study of the geochemistry and mineralogy of selected meteorites reveals significant effects of terrestrial weathering. Fe,Ni metal (hereafter simply metal) and troilite are transformed into Fe oxyhydroxides. A rather unusual type of troilite weathering to pyrite/marcasite is observed in most of the Lut Desert meteorites. Magnetic measurements and X‐ray diffractometry confirm the occurrence of terrestrial weathering products, with the dominance of maghemite, goethite, and hematite. Mobile elements, such as Li, Sr, Mo, Ba, Tl, Th, and U, are enriched with respect to fresh falls. Meanwhile, a decrease in the V, Cr, Co, Rb (and possibly Fe) due to terrestrial weathering is detectable. The total carbon and CaCO₃ is higher than in samples from other hot deserts. The weathering effects observed in the Lut Desert OCs can be used as distinctive indicators to distinguish them from meteorites from other regions of the Earth. Measurements of terrestrial age (¹⁴C) show a range of 10–30 ka, which is in the range of ages reported for meteorites from other hot deserts except the Atacama Desert (Chile). Considering the high potential of the Lut Desert in meteorite preservation, systematic works should lead to the discovery of more samples giving access to interesting material for future studies.     

Test of a solar streamline analysis on terrestrial wind data

Terrestrial wind data are used to test a technique for obtaining solar streamline patterns from line-of-sight velocity measurements. The method of analysis and its limitations are discussed. The major features of the reconstructed terrestrial streamline pattern agree satisfactorily with those of the actual wind field.     

Geology of terrestrial planets with dynamic atmospheres

Geological exploration of the solar system shows that solid-surfaced planets and satellites are subject to endogenic processes (volcanism and tectonism) and exogenic processes (impact cratering and gradation). The present appearance of planetary suffaces is the result of the complex interplay of these processes and is the linked to the evolution of planets and their environments. Terrestrial planets that have dynamic atmospheres are Earth, Mars, and Venus. Atmospheric interaction with the surfaces of these planets, oraeolian activity, is a form of gradation. The manifestation of aeolian activity is the weathering and erosion of rocks into sediments, transportation of the weathered debris (mostly sand and dust) by the wind, and deposition of windblown material. Wind-eroded features include small-scale ventifacts (wind-sculptured rocks) and large-scale landforms such as yardangs. Wind depositional features include dunes, drifts, and mantles of windblown sediments. These and other aeolian features are observed on Earth, Mars, and Venus.     

Cassini SAR, radiometry, scatterometry and altimetry observations of Titan’s dune fields

Large expanses of linear dunes cover Titan’s equatorial regions. As the Cassini mission continues, more dune fields are becoming unveiled and examined by the microwave radar in all its modes of operation (SAR, radiometry, scatterometry, altimetry) and with an increasing variety of observational geometries. In this paper, we report on Cassini’s radar instrument observations of the dune fields mapped through May 2009 and present our key findings in terms of Titan’s geology and climate. We estimate that dune fields cover ∼12.5% of Titan’s surface, which corresponds to an area of ∼10 million km², roughly the area of the United States. If dune sand-sized particles are mainly composed of solid organics as suggested by VIMS observations (Cassini Visual and Infrared Mapping Spectrometer) and atmospheric modeling and supported by radiometry data, dune fields are the largest known organic reservoir on Titan. Dune regions are, with the exception of the polar lakes and seas, the least reflective and most emissive features on this moon. Interestingly, we also find a latitudinal dependence in the dune field microwave properties: up to a latitude of ∼11°, dune fields tend to become less emissive and brighter as one moves northward. Above ∼11° this trend is reversed. The microwave signatures of the dune regions are thought to be primarily controlled by the interdune proportion (relative to that of the dune), roughness and degree of sand cover. In agreement with radiometry and scatterometry observations, SAR images suggest that the fraction of interdunes increases northward up to a latitude of ∼14°. In general, scattering from the subsurface (volume scattering and surface scattering from buried interfaces) makes interdunal regions brighter than the dunes. The observed latitudinal trend may therefore also be partially caused by a gradual thinning of the interdunal sand cover or surrounding sand sheets to the north, thus allowing wave penetration in the underlying substrate. Altimetry measurements over dunes have highlighted a region located in the Fensal dune field (∼5° latitude) where the icy bedrock of Titan is likely exposed within smooth interdune areas. The hemispherical assymetry of dune field properties may point to a general reduction in the availability of sediments and/or an increase in the ground humidity toward the north, which could be related to Titan’s asymmetric seasonal polar insolation. Alternatively, it may indicate that either the wind pattern or the topography is less favorable for dune formation in Titan’s northern tropics.     

Weathering of ordinary chondrites from the Atacama Desert,Chile, by Mössbauer spectroscopy and synchrotron radiation X‐ray diffraction

Some terrestrial areas have climatic and geomorphologic features that favor the preservation, and therefore, accumulation of meteorites. The Atacama Desert in Chile is among the most important of such areas, known as DCA. This desert is the driest on Earth, one of the most arid, uninhabitable localities with semiarid, arid, and hyper‐arid conditions. The meteorites studied here were collected from within the DCA of San Juan and Pampa de Mejillones, located, respectively, in the Central Depression and the Coastal Range of the Atacama Desert. ⁵⁷Fe Mössbauer spectroscopy was used for quantitative analysis of the degree of weathering of the meteorites, through the determination of the proportions of the various Fe‐bearing phases and in particular the amount of oxidized iron in terrestrial alteration products. The abundance of ferric ions in weathered chondrites can be related to specific precursor compositions and to the level of terrestrial weathering. The aim of the study was the identification, quantification, and differentiation of the weathering products in the ordinary chondrites found in the San Juan and the Pampa de Mejillones areas of the Atacama Desert. The ⁵⁷Fe Mössbauer spectroscopy study was complemented by synchrotron radiation X‐ray diffraction and magnetic susceptibility measurements. The results allow a clear differentiation of the rate of weathering in meteorite samples collected from the San Juan versus the Pampa de Mejillones areas of the Atacama Desert.     

Distribution and interplay of geologic processes on Titan from Cassini radar data

The Cassini Titan Radar Mapper is providing an unprecedented view of Titan’s surface geology. Here we use Synthetic Aperture Radar (SAR) image swaths (Ta-T30) obtained from October 2004 to December 2007 to infer the geologic processes that have shaped Titan’s surface. These SAR swaths cover about 20% of the surface, at a spatial resolution ranging from ∼350 m to ∼2 km. The SAR data are distributed over a wide latitudinal and longitudinal range, enabling some conclusions to be drawn about the global distribution of processes. They reveal a geologically complex surface that has been modified by all the major geologic processes seen on Earth - volcanism, tectonism, impact cratering, and erosion and deposition by fluvial and aeolian activity. In this paper, we map geomorphological units from SAR data and analyze their areal distribution and relative ages of modification in order to infer the geologic evolution of Titan’s surface. We find that dunes and hummocky and mountainous terrains are more widespread than lakes, putative cryovolcanic features, mottled plains, and craters and crateriform structures that may be due to impact. Undifferentiated plains are the largest areal unit; their origin is uncertain. In terms of latitudinal distribution, dunes and hummocky and mountainous terrains are located mostly at low latitudes (less than 30°), with no dunes being present above 60°. Channels formed by fluvial activity are present at all latitudes, but lakes are at high latitudes only. Crateriform structures that may have been formed by impact appear to be uniformly distributed with latitude, but the well-preserved impact craters are all located at low latitudes, possibly indicating that more resurfacing has occurred at higher latitudes. Cryovolcanic features are not ubiquitous, and are mostly located between 30° and 60° north. We examine temporal relationships between units wherever possible, and conclude that aeolian and fluvial/pluvial/lacustrine processes are the most recent, while tectonic processes that led to the formation of mountains and Xanadu are likely the most ancient.     

Spectroscopy, morphometry, and photoclinometry of Titan's dunefields from Cassini/VIMS

Fine-resolution (500 m/pixel) Cassini Visual and Infrared Mapping Spectrometer (VIMS) T20 observations of Titan resolve that moon's sand dunes. The spectral variability in some dune regions shows that there are sand-free interdune areas, wherein VIMS spectra reveal the exposed dune substrate. The interdunes from T20 are, variously, materials that correspond to the equatorial bright, 5-μm-bright, and dark blue spectral units. Our observations show that an enigmatic “dark red” spectral unit seen in T5 in fact represents a macroscopic mixture with 5-μm-bright material and dunes as its spectral endmembers. Looking more broadly, similar mixtures of varying amounts of dune and interdune units of varying composition can explain the spectral and albedo variability within the dark brown dune global spectral unit that is associated with dunes. The presence of interdunes indicates that Titan's dunefields are both mature and recently active. The spectrum of the dune endmember reveals the sand to be composed of less water ice than the rest of Titan; various organics are consistent with the dunes' measured reflectivity. We measure a mean dune spacing of 2.1 km, and find that the dunes are oriented on the average in an east-west direction, but angling up to 10° from parallel to the equator in specific cases. Where no interdunes are present, we determine the height of one set of dunes photoclinometrically to be between 30 and 70 m. These results pave the way for future exploration and interpretation of Titan's sand dunes.     

Thermal conductivity modelling of terrestrial soil media—A comparative study

The paper describes prediction of thermal conductivity in terrestrial soil media. The model operates statistically by probability of occurrence for contacts between particular fractional compounds. It combines physical properties, specific to particular compounds, into one apparent conductance specific to the mixture. The concept of substituting grain compounds by hypothetical spheres is an essential tool to control porosity by the number of spheres, their radii and probability of contacts between them. The spheres are equal in radii. The spheres substitute compounds, regardless of the phase state. Control of particular phase states is possible by means of specific properties assigned to the spheres, at the input to the model. Performance of the model is successfully proved for many diverse terrestrial soil media in a wide range of bulk density, composition, water and water vapour content. Only the compounds of sand decline from the expected values and require introducing a correction to the thermal conductivity of sand grains. One possible explanation is that the thermal conductivity of sand is uncertain. Nevertheless, the model is useful and worth extending beyond terrestrial purposes.     

Barchan dune asymmetry: Observations from Mars and Earth

Barchan dune asymmetry refers to the extension of one barchan limb downwind. It is a common dune form on Earth and also occurs on Mars and Titan. A new classification of barchan limbs is presented where three types of limb morphology are identified: linear, kinked and beaded. These, along with other dune-scale morphological signatures, are used to identify three of the causes of barchan asymmetry on Mars: bi-directional winds, dune collision and the influence of inclined topography.The potential for specific dune asymmetric morphologies to indicate aspects of the formative wind regime on planetary surfaces is shown. For example, the placement of dune limbs can indicate the general direction and relative strength of formative oblique winds; an extreme barchan limb length may indicate a long duration oblique wind; a kinked limb may be evidence of the passage of a storm; beaded limbs may represent surface-wave instabilities caused by an increase in wind energy parallel to the dune. A preliminary application of these signatures finds evidence for bi-modal winds on Mars. However, these and other morphological signatures of wind direction and relative strength should be applied to planetary landforms with caution as more than one process (e.g., bi-modal winds and collision) may be operating together or sequentially on the dunefield. In addition, analysis should be undertaken at the dunefield scale and not on individual dunes. Finally, morphological data should be acquired from similar-scale dunes within a dunefield.In addition to bi-modal wind regimes on Mars, the frequent parallel alignment of the extended barchan limb to the dune suggests that dune collision is also an important cause of asymmetry on Mars. Some of the more complex dunefield patterns result from a combination of dune collision, limb extension and merging with downwind dunes.Dune asymmetric form does not inhibit dune migration in the Namib Desert or on Mars. Data from the Namib suggest that dune migration rates are similar for symmetric and asymmetric dunes. Further modeling and field studies are needed to refine our understanding of the potential range of limb and dune morphologies that can result from specific asymmetry causes.     

Elements of comparison between Martian and terrestrial mesoscale meteorological phenomena: Katabatic winds and boundary layer convection

Terrestrial and Martian atmospheres are both characterised by a large variety of mesoscale meteorological events, occurring at horizontal scales of hundreds of kilometres and below. Available measurements from space exploration and recently developed high-resolution numerical tools have given insights into Martian mesoscale phenomena, as well as similarities and differences with their terrestrial counterparts. The remarkable intensity of Martian mesoscale events compared to terrestrial phenomena mainly results from low density and strong radiative control. This is exemplified in the present paper by discussing two mesoscale phenomena encountered in the lowest atmospheric levels of both planets with notable differences: nighttime katabatic winds (drainage flow down sloping terrains) and daytime boundary layer convection (vertical growth of mixed layer over heated surfaces). While observations of katabatic events are difficult on Earth, except over vast ice sheets, intense clear-cut downslope circulations are expected to be widespread on Mars. Convective motions in the daytime Martian boundary layer are primarily driven by radiative contributions, usually negligible on Earth where sensible heat flux dominates, and exhibit turbulent variances one order of magnitude larger. Martian maximum heat fluxes are not attained close to the surface as on Earth but a few hundreds of metres above, which implies generalised definitions for mixing layer scales such as vertical velocity w_?. Measurements on Mars of winds in uneven topographical areas and of heat fluxes over flat terrains could be useful to assess general principles of mesoscale meteorology applicable to both terrestrial and Martian environments.     

High albedo dune features suggest past dune migration and possible geochemical cementation of aeolian sediments on Mars

High albedo features are identified in association with barchan dunes in an equatorial inter-crater dune field on Mars using images from the MRO mission. This paper describes the morphometric properties of these features and their association with the present barchan dune field. We propose that these features are cemented aeolian deposits that form at the foot of the dune avalanche face. A possible terrestrial analog exists at White Sands National Monument, in south-central New Mexico, USA. The presence of these features suggests past episodes of dune migration in inter-crater dunefields and liquid water in the near sub-surface in sufficient quantity to cause the cementation of aeolian dune sediment.     

The dynamic strength of an ordinary chondrite

Abstract– Dynamic and quasistatic unconfined compression experiments were performed on samples of the L5 ordinary chondrite MacAlpine Hills (MAC) 88118. The dynamic compressive strength measurements are the first of its kind for a stony meteorite, and indicate that the material tested here exhibits significant increase in compressive strength with increasing strain rate. This increase in compressive strength is larger than the increases typically observed in terrestrial rock specimens compressed over a similar range of strain rates. The details of the failure process are investigated by recording images of the experiments in real time. Specifically, the crack growth speeds in the dynamic compression experiments are measured from ultrahigh‐speed images. These speeds are significantly lower than the speeds observed in terrestrial analogs that are typically used in numerical investigations of large‐scale impacts. The implications of these measurements of strength and failure process are explored in the contexts of atmospheric disruption of meteors and impact cratering/disruption of asteroids.     

δ18O and chemical composition of Libyan Desert Glass,country rocks,and sands: New considerations on target material

Oxygen isotope and chemical measurements were carried out on 25 samples of Libyan Desert Glass (LDG), 21 samples of sandstone, and 3 of sand from the same area. The δ¹⁸O of LDG samples range from 9.0‰ to 11.9‰ (Vienna Standard Mean Ocean Water [VSMOW]); some correlations between isotope data and typological features of the LDG samples are pointed out. The initial δ¹⁸O of a bulk parent material may be slightly increased by fusion due to the loss of isotopically light pore water with no isotope exchange with oxygen containing minerals. Accordingly, the δ¹⁸O of the bulk parent material of LDG may have been about 9.0 ± 1‰ (VSMOW). The measured bulk sandstone and sand samples have δ¹⁸O values ranging from 12.6‰ to 19.5‰ and are consequently ruled out as parent materials, matching the results of previous studies. However, separated quartz fractions have δ¹⁸O values compatible with the LDG values suggesting that the modern surface sand inherited quartz from the target material. This hypothesis fits previous findings of lechatelierite and baddeleyite in these materials. As the age of the parent material reported in previous studies is Pan‐African, we measured the δ¹⁸O values of bulk rock and quartz from intrusives of Pan‐African age and the results obtained were compatible with the LDG values. The main element abundances (Fe, Mg, Ca, K, Na) in our LDG samples conform to previous estimates; Fe, Mg, and K tend to be higher in heterogeneous samples with dark layers. The hypothesis of a low‐altitude airburst involving silica‐rich surface materials deriving from weathered intrusives of Pan‐African age, partially melted and blown over a huge surface by supersonic winds matches the results obtained.     

Flood-formed dunes in Athabasca Valles, Mars: morphology, modeling, and implications

Estimates of discharge for martian outflow channels have spanned orders of magnitude due in part to uncertainties in floodwater height. A methodology of estimating discharge based on bedforms would reduce some of this uncertainty. Such a methodology based on the morphology and granulometry of flood-formed (‘diluvial’) dunes has been developed by Carling (1996b, in: Branson, J., Brown, A.G., Gregory, K.J. (Eds.), Global Continental Changes: The Context of Palaeohydrology. Geological Society Special Publication No. 115, London, UK, 165-179) and applied to Pleistocene flood-formed dunes in Siberia. Transverse periodic dune-like bedforms in Athabasca Valles, Mars, have previously been classified both as flood-formed dunes and as antidunes. Either interpretation is important, as they both imply substantial quantities of water, but each has different hydraulic implications. We undertook photoclinometric measurements of these forms, and compared them with data from flood-formed dunes in Siberia. Our analysis of those data shows their morphology to be more consistent with dunes than antidunes, thus providing the first documentation of flood-formed dunes on Mars. Other reasoning based on context and likely hydraulics also supports the bedforms' classification as dunes. Evidence does not support the dunes being aeolian, although a conclusive determination cannot be made with present data. Given the preponderance of evidence that the features are flood-formed instead of aeolian, we applied Carling's (1996b, in: Branson, J., Brown, A.G., Gregory, K.J. (Eds.), Global Continental Changes: The Context of Palaeohydrology. Geological Society Special Publication No. 115, London, UK, 165-179) dune-flow model to derive the peak discharge of the flood flow that formed them. The resultant estimate is approximately 2×10⁶ m³/s, similar to previous estimates. The size of the Athabascan dunes' in comparison with that of terrestrial dunes suggests that these martian dunes took at least 1-2 days to grow. Their flattened morphology implies that they were formed at high subcritical flow and that the flood flow that formed them receded very quickly.     

Dune fields on Mars: Recorders of a climate change?

Dunes have similar morphologies on the Earth and Mars. The main differences between Martian and terrestrial dunes are their size, which is larger on Mars, and their duration of formation, which is longer on Mars. As the characteristic time of Martian dunes is in the same order as that of the Martian climatic oscillations, Martian dunes could be recorders of past winds regimes and past climates. In order to test this hypothesis, we performed a morphological study of 550 dune fields with high resolution images and we inferred the directions of the dune formative winds from the orientation of the dune slip faces. Our study shows that 310 dune fields record one to four distinct wind directions with some geometric patterns that do not exist on the Earth such as barchans built by opposite wind directions coexisting in the same dune field. Our study demonstrates that the inferred formative wind directions are only partially in agreement with the current wind-patterns predicted by General Circulation Models (GCM). Several possible causes for the misalignment between dunes and GCM outputs are discussed: these include the local variation of the global circulation due to local topographic effects or the possibility that these dunes could be in a transient geometry or fossil. Such bedforms are considered indeed to be not in equilibrium with the present-day atmospheric conditions. This latter hypothesis is supported by the presence, in some ergs, of closely spaced dunes showing nearly opposite slip face orientations. Therefore, we propose that Martian dune fields are constituted, in some cases, by active and fossil dunes and therefore have the potential to preserve information on paleoclimates over extensive periods.     

Lava tubes and channels in the lunar Marius Hills

The Marius Hills region, a volcanic plateau in Oceanus Procellarum, contains numerous rilles, rille-like structures, and chains of elongate craters. Most of these structures characteristically: (1) originate on or near irregular shaped craters associated with features previously interpreted as volcanic domes, (2) trend downslope onto Plateau Plains, (3) generally taper in width and become shallower, (4) are often discountinuous, (5) occupy the center, or apparent crest of a broad ridge, (6) may contain cut-off branches and distributary structures, and (7) may have local reversals in longitudinal slope. Structures having these characteristics are interpreted to be lava channels or partly collapsed lava tubes. Terrestrial lava tubes form exclusively, and commonly, in fluid basalt flows. Recent evidence indicates that viscosities of lunar mare basalt lava flows were conducive for lava tube formation.Terrestrial analogs are offered for structures described in the Marius Hills. The analogs are comparable in qualitative and quantitative geomorphic aspects, excluding that of width. Scaling consideration of lunar reduced gravity accounts for increased width of the lunar structures. Linear and curvilinear rilles trending along equal elevations are interpreted to result from fracturing or faulting.     

Derivation of martian surface slope characteristics from directional thermal infrared radiometry

Directional thermal infrared measurements of the martian surface is one of a variety of methods that may be used to characterize surface roughness and slopes at scales smaller than can be obtained by orbital imagery. Thermal Emission Spectrometer (TES) emission phase function (EPF) observations show distinct apparent temperature variations with azimuth and emission angle that are consistent with the presence of warm, sunlit and cool, shaded slopes at typically ∼0.1 m scales. A surface model of a Gaussian distribution of azimuth independent slopes (described by θ-bar) is combined with a thermal model to predict surface temperature from each viewing angle and azimuth of the TES EPF observation. The models can be used to predict surface slopes using the difference in measured apparent temperature from 2 separate 60-70° emission angle observations taken ∼180° in azimuth relative to each other. Most martian surfaces are consistent with low to moderate slope distributions. The slope distributions display distinct correlations with latitude, longitude, and albedo. Exceptionally smooth surfaces are located at lower latitudes in both the southern highlands as well as in high albedo dusty terrains. High slopes are associated with southern high-latitude patterned ground and north polar sand dunes. There is little apparent correlation between high resolution imagery and the derived θ-bar, with exceptions such as duneforms. This method can be used to characterize potential landing sites by assuming fractal scaling behavior to meter scales. More precisely targeted thermal infrared observations from other spacecraft instruments are capable of significantly reducing uncertainty as well as reducing measurement spot size from 10s of kilometers to sub-kilometer scales.     

Spectral and geological study of the sulfate-rich region of West Candor Chasma, Mars

Sulfates have been discovered by the OMEGA spectrometer in different locations of the planet Mars. They are strongly correlated to light toned layered deposits in the equatorial regions. West Candor Chasma is the canyon with the thickest stack of layers and one with the largest area covered by sulfates. A detailed study coupling mineralogy derived from OMEGA spectral data and geology derived from HRSC imager and other datasets leads to some straightforward issues. The monohydrated sulfate kieserite is found mainly over heavily eroded scarps of light toned material. It likely corresponds to a mineral present in the initial rock formed either during formation and diagenesis of sediments, or during hydrothermal alteration at depth, because it is typically found on outcrops that are eroded and steep. Polyhydrated sulfates, that match any Ca-, Na-, Fe-, or Mg-sulfates with more than one water molecule, are preferentially present on less eroded and darker outcrops than outcrops of kieserite. These variations can be the result of a diversity in the composition and/or of the rehydration of kieserite on surfaces with longer exposure. The latter possibility of rehydration in the current, or recent, atmosphere suggests the low surface temperatures preserve sulfates from desiccation, and, also can rehydrate part of them. Strong signatures of iron oxides are present on sulfate-rich scarps and at the base of layered deposits scarps. They are correlated with TES gray hematite signature and might correspond to iron oxides present in the rock as sand-size grains, or possibly larger concretions, that are eroded and transported down by gravity at the base of the scarp. Pyroxenes are present mainly on sand dunes in the low lying terrains. Pyroxene is strongly depleted or absent in the layered deposits. When mixed with kieserite, local observations favor a spatial mixing with dunes over layered deposits. Sulfates such as those detected in the studied area require the presence of liquid water to form by precipitation, either in an intermittent lacustrine environment or by hydrothermal fluid circulation. Both possibilities require the presence of sulfur-rich groundwater to explain fluid circulation. The elevation of the uppermost sulfate signatures suggests the presence of aquifers up to 2.5 km above datum, only 1 km below the plateau surface.