基于粗糙集的支持向量机滑坡易发性评价

区域滑坡易发性评价对灾害中长期预测预报具有重要意义。以三峡库区秭归至巴东段为研究区,利用粗糙集理论对20个初始评价因子进行属性约简,去掉冗余或干扰信息,得到13个核心评价因子,并以此作为支持向量机的输入特征集,构建支持向量机模型,实现滑坡易发性评价。在易发性分区图中高易发区占8.2%,主要分布在童庄河右岸、归州河沿岸、青干河左岸、树坪至范家坪长江右岸、牛口到东壤口长江左岸和巴东附近;不易发区占 52.7%,主要分布于店子湾至巴东旧城以及远离长江水系及植被覆盖度高的区域。通过验证与分析,粗糙集-支持向量机模型在高中易发区中的预测精度为85.6%,其预测能力优于支持向量机模型;与野外调查对比,预测结果与实际情况吻合较好。研究表明,应用粗糙集和支持向量机相结合进行滑坡易发性评价具有预测能力强、计算效率高等优点。     

浙西梅雨滑坡易发性评价模型对比

我国目前滑坡易发性评价研究主要集中在西南地区,对东南部降雨引发特别是梅雨引发的滑坡研究较少.选取浙江省西北部梅雨控制区淳安县为研究区,通过遥感解译结合野外详细调查,共确定滑坡596处,并建立滑坡编录数据库.选取高程、坡向、坡度、曲率、工程岩组、断层、道路、建设用地、植被等9个滑坡影响因子,基于GIS栅格分析方法,采用人工神经网络(ANN)、logistic回归和信息量3种评价模型,分别对32种不同影响因子组合进行滑坡易发性对比评价,得到滑坡易发性指数图.应用评价曲线下面积AUC(area under curve)对评价结果进行检验,ANN、logistic回归和信息量3种模型的正确率分别是93.75%、89.76%和90.06%;采用淳安县2014年梅汛期发生的13处滑坡作为预测样本,3种模型预测率分别是94.75%、94.33%和77.21%.上述分析结果表明:ANN模型优于其他两者.以ANN模型评价结果指数图为基础进行易发性分区,采用滑坡强度指标进行分区结果检验,滑坡强度值由易发性低、较低、中和高依次递增,说明分区结果合理.研究成果可以为浙西降雨型滑坡特别是由梅雨引发滑坡的易发性评价提供参考.      

基于遥感影像多尺度分割与地质因子评价的滑坡易发性区划

区域滑坡易发性的研究是滑坡空间预测的核心内容之一。从影像多尺度分割和面向对象的分类理论出发,以研究区遥感影像的熵、能量、相关性、对比度共4个参数作为影像纹理因子提取易发性特征,利用滑坡所处区域的库水影响等级、坡度、斜坡结构、工程岩组4类地质因子分析地质背景,搭建C5.0决策树的易发性分类模型,实现了对研究区内4类滑坡易发性单元的预测。结果表明:高易发性单元的工程岩组通常发育为软岩岩组和软硬相间岩组,且坡度在15°～30°之间;模型显示该区域训练样本和测试样本平均正确率达91.64%,Kappa系数分别为0.84,0.51,因此这种基于影像多尺度分割与地质因子分级的滑坡易发性分类研究具有一定的适用性。     

基于斜坡单元的滑坡易发性评价 ——以遵义市汇川区山盆区域为例

贵州省遵义市汇川区是地质灾害相对频发的地区,以遵义市汇川区山盆区域为研究区,以斜坡单元为评价单元,提取地形坡度、地表粗糙指数、斜坡类型、工程岩组、地表起伏度、人类工程活动强度等6项因子,采用层次分析法对研究区滑坡地质灾害易发性进行评价,绘制基于斜坡单元的研究区易发性评价分级图,评价结果认为:滑坡高易发斜坡单元和较高易发...     

基于斜坡单元与信息量法结合的宝塔区黄土滑坡易发性评价

滑坡易发性评价对滑坡灾害的防治与管理具有重要意义。为了评价延安宝塔区黄土滑坡易发性,以斜坡为基本评价单元,选取斜坡坡度、坡高、坡向、坡形、斜坡结构类型、植被和人类工程活动7个指标作为评价因子,在Arc GIS平台下,利用信息量模型对研究区的黄土滑坡进行易发性分区评价。评价结果表明,宝塔区滑坡高易发区面积1092.39km~2,占全区面积的30.81%,主要分布于宝塔区的中部及北部地区,低易发区集中于宝塔区南部汾川河流域。以斜坡作为评价单元提高了与实际地形地貌的吻合度。应用信息量模型进行滑坡易发性评价具有较高的预测精度,已有滑坡点落在很高易发区和高易发区中的比例为95.7%,较真实地反映了客观实际。     

基于斜坡单元的山区城镇滑坡灾害易发性评价：以康定为例

山区地质灾害易发性评价对城镇地质灾害风险管理具有重要意义。本文以康定市为例,以斜坡单元为最小评价单元,选取高程、坡度、坡向、曲率、工程地质岩组、距道路距离、距断裂距离、距水系距离和斜坡结构等9个滑坡影响因子,根据各因子滑坡面积比曲线与证据权值曲线的突变点,划分滑坡影响因子二级状态,并对各影响因子进行相关性分析,剔除相关性较高的距道路距离因子,在此基础上,采用证据权模型进行滑坡易发性评价。对已有治理工程的斜坡单元,本文尝试利用折减系数法对其易发性进行进一步评价。结合现场调查,将研究区滑坡易发性程度划分为：极高易发、高易发、中等易发、低易发。评价结果表明,自然工况下极高易发区主要位于康定市炉城镇以及研究区北侧二道桥村一带,高易发区主要位于雅拉河、折多河与瓦斯沟河谷两侧,对治理工程所在的斜坡单元进行折减后,极高易发区面积由11.21%降至8.42%,滑坡比率由4.03降低至2.3,研究结果符合实际情况,模型精度达77.8%。评价结果较好地反映了康定市区的滑坡易发性分布情况,可为城镇精细化评价提供一定的参考依据。     

基于XGBoost模型的三峡库区燕山乡滑坡易发性评价与区划

滑坡易发性评价是精细化滑坡灾害风险评价的基础。为了提升滑坡易发性评价模型的精度和稳健性,以三峡库区万州区燕山乡为例,选取工程地质岩组、堆积层厚度等九个影响因子构建滑坡易发性评价指标体系,应用信息量模型定量分析滑坡发育与指标之间的关系。在此基础上,随机选取70%/30%的滑坡样本作为训练/验证数据集,应用极致梯度提升模型(extreme gradient boosting, XGBoost)开展易发性评价。随后从模型预测精度和模型稳定性两方面将其与决策树模型(decision tree, DT)和梯度提升树模型(gradient boosting decision tree, GBDT)进行对比。结果表明：研究区堆积层滑坡主要受长江水系、堆积层厚度和工程地质岩组影响。XGBoost模型具有最高的准确率(94.3%)和预测精度(97.3%)。在模型稳定性验证中,平均预测精度最高(97.3%),优于DT(91.3%)和GBDT(95.7%),模型标准差和变异系数均为0.01,低于其余两种模型。XGBoost在区域滑坡易发性评价与制图中得到了可靠的结果,为滑坡灾害空间预测提供了新的技术支撑。     

贵州省都匀市滑坡易发性评价研究

都匀市是贵州省城镇滑坡地质灾害多发频发区。文章以都匀市沙包堡镇为研究区,采用栅格单元提取高程、坡度、岩性、水系等9项致灾因子,分别使用都基于数学统计模型的定量分析方法（二元逻辑回归模型、信息量模型）和定性分析方法（层次分析模型）对都匀市研究区滑坡地质灾害易发性进行评价。结果表明:二元逻辑回归模型预测精度与预测效果均为最优,其ROC曲线下面积AUC值为0.873,易发性分区中高易发区和中易发区内预测发生滑坡面积比占95.41%,且最符合野外实地调查验证情况。评价方法与结果可为贵州城镇地区滑坡地质灾害评价和防治提供借鉴。     

基于深度神经网络模型的雅安市滑坡易发性评价CSCD

准确的滑坡易发性评价结果是滑坡风险评估的基础,对防灾减灾工作有着重要的意义。文章以雅安市为研究区,在野外地质调查的基础上,选取高程、坡度、坡向、平面曲率、剖面曲率、地形湿度指数、泥沙输运指数、径流强度指数、归一化植被指数、年均降雨量、地震动峰值加速度、地形起伏度、距断层距离、地层岩性、距河流距离、距道路距离等16个因子,构建研究区滑坡易发性评价指标体系,采用度神经网深络(DNN)模型进行滑坡易发性评价,根据易发性指数将研究区划分为极高易发区(12.2%)、高易发区(7.0%)、中易发区(9.8%)、低易发区(17.0%)、极低易发区(54.1%)五个等级,并与人工神经网络(ANN)模型进行对比,用ROC曲线的AUC值进行精度检验。结果表明,DNN模型的评价精度AUC(0.99)大于ANN(0.96)模型。因此,相比ANN模型,DNN模型在该研究区有着更好的拟合能力和预测能力,滑坡极高和高易发区主要分布于雅安市人类工程活动强烈的低海拔地区,沿着道路和水系分布,距道路距离、高程、年均降雨量是影响雅安滑坡发育的主要影响因子。     

雷达数据辅助下的滑坡易发性评价

岩土体含水量对滑坡,尤其是土质滑坡的稳定性具有极大的影响。本文以三峡库区秭归段内土质滑坡作为研究对象,利用Sentinel-1雷达数据反演地表岩土体含水量来替代传统的湿度指数因子,在保持其他因子不变的情况下,构建二元逻辑回归模型进行滑坡易发性评价。结果表明,利用成功率曲线对结果进行分析,采用岩土体含水量因子时预测精度达到80.2%,高于采用地形湿度指数的77.2%。利用雷达数据反演得到的岩土体含水量代替地形湿度指数进行滑坡易发性评价精度较高、预测能力较强。     

Application of an incomplete landslide inventory, logistic regression model and its validation for landslide susceptibility mapping related to the May 12, 2008 Wenchuan earthquake of China

The main purpose of this paper is to present the use of multi-resource remote sensing data, an incomplete landslide inventory, GIS technique and logistic regression model for landslide susceptibility mapping related to the May 12, 2008 Wenchuan earthquake of China. Landslide location polygons were delineated from visual interpretation of aerial photographs, satellite images in high resolutions, and verified by selecting field investigations. Eight factors, including slope angle, slope aspect, elevation, distance from drainages, distance from roads, distance from main faults, seismic intensity and lithology were selected as controlling factors for earthquake-triggered landslide susceptibility mapping. Qualitative susceptibility analyses were carried out using the map overlaying techniques in GIS platform. The validation result showed a success rate of 82.751 % between the susceptibility probability index map and the location of the initial landslide inventory. The predictive rate of 86.930 % was obtained by comparing the additional landslide polygons and the landslide susceptibility probability index map. Both the success rate and the predictive rate show sufficient agreement between the landslide susceptibility map and the existing landslide data, and good predictive power for spatial prediction of the earthquake-triggered landslides.     

基于GIS与WOE-BP模型的滑坡易发性评价

区域滑坡易发性研究对地质灾害风险管理具有重要意义.以往研究中,将多元统计模型与机器学习方法相结合用于滑坡易发性评价的研究较少.以三峡库区万州区为例,首先选取9种指标因子（坡度、坡向、剖面曲率、地表纹理、地层岩性、斜坡结构、地质构造、水系分布及土地利用类型）作为滑坡易发性评价指标.基于证据权模型（weights of evidence,WOE）计算得到的对比度和滑坡面积比与分级面积比的相对大小,对各指标因子进行状态分级;再利用粒子群法优化的BP神经网络模型（PSO-BP）得到各指标因子权重.综合两种模型确定的状态分级权重和指标因子权重（WOE-BP）计算滑坡易发性指数（landslide susceptibility index,LSI）,基于GIS平台得到全区滑坡易发性分区图.结果表明:水系、地层岩性和地质构造是影响万州区滑坡发育的主要指标因子;WOE-BP模型的预测精度为80.8%,优于WOE模型的73.1%和BP神经网络模型的71.6%,可为定量计算指标因子权重和优化滑坡易发性评价提供有效途径.      

A comparative study on the landslide susceptibility mapping using evidential belief function and weights of evidence models

The purpose of this study is to produce landslide susceptibility map of a landslide-prone area (Daguan County, China) by evidential belief function (EBF) model and weights of evidence (WoE) model to compare the results obtained. For this purpose, a landslide inventory map was constructed mainly based on earlier reports and aerial photographs, as well as, by carrying out field surveys. A total of 194 landslides were mapped. Then, the landslide inventory was randomly split into a training dataset; 70% (136 landslides) for training the models and the remaining 30% (58 landslides) was used for validation purpose. Then, a total number of 14 conditioning factors, such as slope angle, slope aspect, general curvature, plan curvature, profile curvature, altitude, distance from rivers, distance from roads, distance from faults, lithology, normalized difference vegetation index (NDVI), sediment transport index (STI), stream power index (SPI), and topographic wetness index (TWI) were used in the analysis. Subsequently, landslide susceptibility maps were produced using the EBF and WoE models. Finally, the validation of landslide susceptibility map was accomplished with the area under the curve (AUC) method. The success rate curve showed that the area under the curve for EBF and WoE models were of 80.19% and 80.75% accuracy, respectively. Similarly, the validation result showed that the susceptibility map using EBF model has the prediction accuracy of 80.09%, while for WoE model, it was 79.79%. The results of this study showed that both landslide susceptibility maps obtained were successful and would be useful for regional spatial planning as well as for land cover planning.     

A comparative study on the landslide susceptibility mapping using logistic regression and statistical index models

The logistic regression and statistical index models are applied and verified for landslide susceptibility mapping in Daguan County, Yunnan Province, China, by means of the geographic information system (GIS). A detailed landslide inventory map was prepared by literatures, aerial photographs, and supported by field works. Fifteen landslide-conditioning factors were considered: slope angle, slope aspect, curvature, plan curvature, profile curvature, altitude, STI, SPI, and TWI were derived from digital elevation model; NDVI was extracted from Landsat ETM7; rainfall was obtained from local rainfall data; distance to faults, distance to roads, and distance to rivers were created from a 1:25,000 scale topographic map; the lithology was extracted from geological map. Using these factors, the landslide susceptibility maps were prepared by LR and SI models. The accuracy of the results was verified by using existing landslide locations. The statistical index model had a predictive rate of 81.02%, which is more accurate prediction in comparison with logistic regression model (80.29%). The models can be used to land-use planning in the study area.     

Estimating potential landslide sites of an upland sub-watershed in Western Ghat’s of Kerala (India) through frequency ratio and GIS

The purpose of this study is to assess the susceptibility of landslides in parts of Western Ghats, Kerala, India, using a geographical information system (GIS). Landslide inventory of the area was made by detailed field surveys and the analysis of the topographical maps. The landslide triggering factors are considered to be slope angle, slope aspect, slope curvature, slope length, distance from drainage, distance from lineaments, lithology, land use and geomorphology. ArcGIS version 8.3 was used to manipulate and analyse all the collected data. Probabilistic-likelihood ratio was used to create a landslide susceptibility map for the study area. The result was validated using the Area under Curve (AUC) method and temporal data of landslide occurrences. The validation results showed satisfactory agreement between the susceptibility map and the existing data on landslide locations. As the result, the success rate of the model was (84.46%) and the prediction rate of the model was (82.38%) shows high prediction accuracy. In the reclassified final landslide susceptibility zone map, 5.68% of the total area is classified as critical in nature. The landslide susceptibility map thus produced can be used to reduce hazards associated with landslides and to land cover planning.     

Landslide susceptibility mapping using certainty factor, index of entropy and logistic regression models in GIS and their comparison at Mugling�CNarayanghat road section in Nepal Himalaya

Landslide susceptibility maps are vital for disaster management and for planning development activities in the mountainous country like Nepal. In the present study, landslide susceptibility assessment of Mugling?CNarayanghat road and its surrounding area is made using bivariate (certainty factor and index of entropy) and multivariate (logistic regression) models. At first, a landslide inventory map was prepared using earlier reports and aerial photographs as well as by carrying out field survey. As a result, 321 landslides were mapped and out of which 241 (75?%) were randomly selected for building landslide susceptibility models, while the remaining 80 (25?%) were used for validating the models. The effectiveness of landslide susceptibility assessment using GIS and statistics is based on appropriate selection of the factors which play a dominant role in slope stability. In this case study, the following landslide conditioning factors were evaluated: slope gradient; slope aspect; altitude; plan curvature; lithology; land use; distance from faults, rivers and roads; topographic wetness index; stream power index; and sediment transport index. These factors were prepared from topographic map, drainage map, road map, and the geological map. Finally, the validation of landslide susceptibility map was carried out using receiver operating characteristic (ROC) curves. The ROC plot estimation results showed that the susceptibility map using index of entropy model with AUC value of 0.9016 has highest prediction accuracy of 90.16?%. Similarly, the susceptibility maps produced using logistic regression model and certainty factor model showed 86.29 and 83.57?% of prediction accuracy, respectively. Furthermore, the ROC plot showed that the success rate of all the three models performed more than 80?% accuracy (i.e. 89.15?% for IOE model, 89.10?% for LR model and 87.21?% for CF model). Hence, it is concluded that all the models employed in this study showed reasonably good accuracy in predicting the landslide susceptibility of Mugling?CNarayanghat road section. These landslide susceptibility maps can be used for preliminary land use planning and hazard mitigation purpose.     

Mapping landslide susceptibility with frequency ratio,statistical index,and weights of evidence models: a case study in northern Iran

The main objective of this study is to investigate potential application of frequency ratio (FR), weights of evidence (WoE), and statistical index (SI) models for landslide susceptibility mapping in a part of Mazandaran Province, Iran. First, a landslide inventory map was constructed from various sources. The landslide inventory map was then randomly divided in a ratio of 70/30 for training and validation of the models, respectively. Second, 13 landslide conditioning factors including slope degree, slope aspect, altitude, plan curvature, stream power index, topographic wetness index, sediment transport index, topographic roughness index, lithology, distance from streams, faults, roads, and land use type were prepared, and the relationships between these factors and the landslide inventory map were extracted by using the mentioned models. Subsequently, the multi-class weighted factors were used to generate landslide susceptibility maps. Finally, the susceptibility maps were verified and compared using several methods including receiver operating characteristic curve with the areas under the curve (AUC), landslide density, and spatially agreed area analyses. The success rate curve showed that the AUC for FR, WoE, and SI models was 81.51, 79.43, and 81.27, respectively. The prediction rate curve demonstrated that the AUC achieved by the three models was 80.44, 77.94, and 79.55, respectively. Although the sensitivity analysis using the FR model revealed that the modeling process was sensitive to input factors, the accuracy results suggest that the three models used in this study can be effective approaches for landslide susceptibility mapping in Mazandaran Province, and the resultant susceptibility maps are trustworthy for hazard mitigation strategies.     

GIS-based landslide susceptibility mapping with probabilistic likelihood ratio and spatial multi-criteria evaluation models (North of Tehran,Iran)

The aim of this study is to produce landslide susceptibility mapping by probabilistic likelihood ratio (PLR) and spatial multi-criteria evaluation (SMCE) models based on geographic information system (GIS) in the north of Tehran metropolitan, Iran. The landslide locations in the study area were identified by interpretation of aerial photographs, satellite images, and field surveys. In order to generate the necessary factors for the SMCE approach, remote sensing and GIS integrated techniques were applied in the study area. Conditioning factors such as slope degree, slope aspect, altitude, plan curvature, profile curvature, surface area ratio, topographic position index, topographic wetness index, stream power index, slope length, lithology, land use, normalized difference vegetation index, distance from faults, distance from rivers, distance from roads, and drainage density are used for landslide susceptibility mapping. Of 528 landslide locations, 70 % were used in landslide susceptibility mapping, and the remaining 30 % were used for validation of the maps. Using the above conditioning factors, landslide susceptibility was calculated using SMCE and PLR models, and the results were plotted in ILWIS-GIS. Finally, the two landslide susceptibility maps were validated using receiver operating characteristic curves and seed cell area index methods. The validation results showed that area under the curve for SMCE and PLR models is 76.16 and 80.98 %, respectively. The results obtained in this study also showed that the probabilistic likelihood ratio model performed slightly better than the spatial multi-criteria evaluation. These landslide susceptibility maps can be used for preliminary land use planning and hazard mitigation purpose.     

A novel hybrid integration model using support vector machines and random subspace for weather-triggered landslide susceptibility assessment in the Wuning area (China)

This study proposed a hybrid modeling approach using two methods, support vector machines and random subspace, to create a novel model named random subspace-based support vector machines (RSSVM) for assessing landslide susceptibility. The newly developed model was then tested in the Wuning area, China, to produce a landslide susceptibility map. With the purpose of achieving the objective of the study, a spatial dataset was initially constructed that includes a landslide inventory map consisting of 445 landslide regions. Then, various landslide-influencing factors were defined, including slope angle, aspect, altitude, topographic wetness index, stream power index, sediment transport index, soil, lithology, normalized difference vegetation index, land use, rainfall, distance to roads, distance to rivers, and distance to faults. Next, the result of the RSSVM model was validated using statistical index-based evaluations and the receiver operating characteristic curve approach. Then, to evaluate the performance of the suggested RSSVM model, a comparison analysis was performed to other existing approaches such as artificial neural network, Naïve Bayes (NB) and support vector machine (SVM). In general, the performance of the RSSVM model was better than the other models for spatial prediction of landslide susceptibility. The AUC results of the applied models are as follows: RSSVM (AUC = 0.857), followed by MLP (AUC = 0.823), SVM (AUC = 0.814) and NB (AUC = 0.783). The present study indicates that RSSVM can be used for landslide susceptibility evaluation, and the results are very useful for local governments and people living in the Wuning area.     

Application of weights-of-evidence and certainty factor models and their comparison in landslide susceptibility mapping at Haraz watershed, Iran

The main goal of this study was to investigate the application of the weights-of-evidence and certainty factor approaches for producing landslide susceptibility maps of a landslide-prone area (Haraz) in Iran. For this purpose, the input layers of the landslide conditioning factors were prepared in the first stage. The landslide conditioning factors considered for the study area were slope gradient, slope aspect, altitude, lithology, land use, distance from streams, distance from roads, distance from faults, topographic wetness index, stream power index, stream transport index and plan curvature. For validation of the produced landslide susceptibility maps, the results of the analyses were compared with the field-verified landslide locations. Additionally, the receiver operating characteristic curves for all the landslide susceptibility models were constructed and the areas under the curves were calculated. The landslide locations were used to validate results of the landslide susceptibility maps. The verification results showed that the weights-of-evidence model (79.87%) performed better than certainty factor (72.02%) model with a standard error of 0.0663 and 0.0756, respectively. According to the results of the area under curve evaluation, the map produced by weights-of-evidence exhibits satisfactory properties.