Heavy metal biosorption potential of a Malaysian Rhodophyte (<Emphasis Type="Italic">Eucheuma denticulatum</Emphasis>) from aqueous solutions

Biosorption is a promising technology for the removal of heavy metals from industrial wastes and effluents. In the present study, biosorption of Pb²⁺, Cu²⁺, Fe²⁺ and Zn²⁺ onto the dried biomass of Eucheuma denticulatum (Rhodophyte) was investigated as a function of solution pH, contact time, temperature and initial metal ion concentration. The experimental data were evaluated by Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. The sorption isotherm data followed Langmuir and Freundlich models, and the maximum Langmuir monolayer biosorption capacity was found as 81.97, 66.23, 51.02 and 43.48 mg g^?1 for Pb²⁺, Cu²⁺, Fe²⁺ and Zn²⁺, respectively. The sorption kinetic data followed pseudo-second-order and intraparticle diffusion models. Thermodynamic study revealed feasible, spontaneous and endothermic nature of the sorption process. Fourier transform infrared analysis showed the presence of amine, aliphatic, carboxylate, carboxyl, sulfonate and ether groups in the cell wall matrix involved in metal biosorption process. A total of nine error functions were applied in order to evaluate the best-fitting models. We strongly suggest the analysis of error functions for evaluating the fitness of the isotherm and kinetic models. The present work shows that E. denticulatum can be a promising low-cost biosorbent for removal of the experimental heavy metals from aqueous solutions. Further study is warranted to evaluate its potential for the removal of heavy metals from the real environment.     

Adsorption characteristics of phenol and heavy metals on biochar from <Emphasis Type="Italic">Hizikia fusiformis</Emphasis>

The objective of the present study is to evaluate the absorption efficacy of H. fusiformis biochar (HFB) for the removal of phenol and heavy metals from single and mixed solute systems of these species under different experimental conditions. The effects of contact time, pH change, initial phenol concentration, and heavy metal concentration on the adsorption capacity of HFB were investigated. The kinetics and equilibrium models of sorption of the components of the single and mixed solute systems on HFB were also studied. The experimental data were fitted to kinetic and equilibrium models. The batch experiments revealed that 360 min of contact time was sufficient to achieve equilibrium for the adsorption of both phenol and heavy metals. The adsorption of phenol and nickel by HFB followed the pseudo-second-order kinetic model, which was quite adequate for describing the adsorption mechanism. The equilibrium data for the adsorption of phenol and heavy metals fit well to the Langmuir model with regression coefficients of R ² > 0.819. The maximum Langmuir adsorption capacities were 10.39, 12.13, 22.25, 2.24, 2.89, and 22.03 mg/g for phenol, Ni²⁺, Zn²⁺, Cu²⁺, Pb²⁺, and Cd²⁺, respectively. Moreover, HFB exhibited optimal sorption under slightly acidic conditions at pH 6. The HFB used in the present study exhibited higher adsorption capacity for the removal of phenol and heavy metals from aqueous solutions compared to documented sorbents. These results demonstrate that HFB is potentially useful for alleviating the harmful effects of phenol and heavy metal in wastewater treatment systems.     

Biosorption characteristics of heavy metals (Ni2+, Zn2+, Cd2+, Pb2+) from aqueous solution by Hizikia fusiformis

Heavy metal ions (Pb²⁺, Cd²⁺, Ni²⁺, and Zn²⁺) were biosorbed by brown seaweed (Hizikia fusiformis), which was collected from Jeju Island of South Korea. The metal adsorption capacity of H. fusiformis improved significantly by washing with water or by base or acid treatments. The maximum sorption by NaOH-pretreated biomass was observed near a slightly acidic pH (pH 4?6) for Pb²⁺, Cd²⁺, Ni²⁺, and Zn²⁺. This result suggests that the treatment of H. fusiformis biomass with NaOH helped increase the functional forms of carboxylate ester units. Kinetic data showed that the biosorption occurred rapidly during the first 60 min, and most of the heavy metals were bound to the seaweed within 180 min. The maximum metal adsorption capacities assumed by a Langmuir model were on the order of Pb²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺. Equilibrium adsorption data for the heavy metal ions could fit well in the Langmuir model with regression coefficients R ² > 0.97.     

Competitive adsorption of metal ions onto goethite–humic acid-modified kaolinite clay

A binary mixture of humic acid and geothite was prepared and used to modify kaolinite to produce geothite–humic acid (GHA)-modified kaolinite adsorbent useful for the adsorption of Pb²⁺, Cd²⁺, Zn²⁺, Ni²⁺ and Cu²⁺ from Single and Quinary (5) metal ion systems. The cation exchange capacity (CEC) and specific surface area of GHA-modified kaolinite clay adsorbent were found to be 40 meq/100 g and 13 m²/g, respectively, with the CEC being five times that of raw kaolinite clay (7.81 meq/100 g). The Langmuir–Freundlich equilibrium isotherm model gave better fit to experimental data as compared with other isotherm models. In Quinary metal ion system, the presence of Zn²⁺ and Cu²⁺ appears to have an antagonistic effect on the adsorption of Pb²⁺, Cd²⁺ and Ni²⁺, while the presence of Pb²⁺, Cd²⁺ and Ni²⁺ shows a synergistic effect on the adsorption of Zn²⁺ and Cu²⁺. The GHA-modified kaolinite showed strong preference for the adsorption of Pb²⁺ in both metal ion systems. Brouers–Weron–Sotolongo (BWS) kinetic model gave better fit to kinetic data compared with other kinetic models used. Data from BWS kinetic model indicate that adsorption of metal ions onto GHA-modified adsorbent in both metal ion systems followed strictly, diffusion-controlled mechanism with adsorption reaction proceeding to 50 % equilibrium in <2 min in the Single metal ion system and <1 min in the Quinary metal ion system. Adsorption of metal ions onto GHA-modified kaolinite is fairly spontaneous and endothermic in nature in both metal ion systems although the rate of metal ion uptake and spontaneity of reaction are reduced in the Quinary metal ion system.     

Biosorption of trace metals from aqueous multimetal solutions by green microalgae

Two strains of green microalgae C.reinhardti and C.pyrenoidosa were examined for their biosorption of Mn2+,Fe2+,Co2+,Ni2+,Cu2+,Zn2+,and Cd2+from aqueous multi-metal solutions.A wide range of biosorption capacities can be observed due to different strains of microalgae and different species of trace metals.This characteristic was ascribed to the distinct components and structures of algal cell walls and the different physicochemical properties of trace metals,such as atomic weight and ion density.C.pyrenoidosa showed higher uptake capacities than C.reinhardti and both of them had a preference for the uptake of cadmium over others in the trace metal solution,suggesting they can be a good biomaterial for biosorption of cadmium.Live microalgal cells displayed a more complex sorption process than dead microalgal cells because of cell assimilation.     

Removal of Lead,Copper, Zinc and Cadmium from Water Using Phosphate Rock

Removal of Pb^2＋, Cu^2＋, Zn^2＋ and Cd^2＋ from aqueous solutions by sorption on a natural phosphate rock （FAP） was investigated. The effects of the contact time and initial metal concentration were examined in the batch method. The percentage sorption of heavy metals from solution ranges generally between 50% and 99%. The amount of sorbed metal ions follows the order Cu〉Pb〉Cd〉Zn. Heavy metal immobilization was attributed to both surface complexation of metal ions on the surface of FAP grains and partial dissolution and precipitation of a heavy metal-containing phosphate. The very low desorption ratio of heavy metals further supports the effectiveness of FAP as an alternative and low-cost material to remove toxic Pb^2＋, Cu^2＋, Zn^2＋ and Cd^2＋ from polluted waters.     

Biosorption an innovative tool for bioremediation of metal-contaminated municipal solid waste leachate: optimization and mechanisms exploration

Municipal solid waste poses a risk on surrounding environment and public health, mainly because of unscientific disposal and shortage of facilities for proper handling and recycling of leachate. This research article objective is to pinpoint the indigenous fungal isolates of waste leachate samples. Therefore, we carried out biosorption of Cd²⁺ tested the applicability by applying indigenous fungal isolates. The limited number of fungal isolates was found based on their ability for biosorption of Cd²⁺ metal. The fungal strains Trichoderma sp., Aspergillus niger and Aspergillus flavus were reported as potential strains for metal exclusion ability from the leachate. Among them, the Trichoderma sp. was found as excellent fungal agent for Cd²⁺ absorption. The optimum pH was 5.5 ± 1, temperature 45 °C, and spore concentration 10^?5 to achieve the maximum biosorption, and 35 days of incubation period were required by three strains. The maximum metal biosorption achieved was comparable for the three isolates: 56.34% by Trichoderma sp., 44.74 and 42.04% by A. niger and A. flavus, respectively. Concluding, the further intending application to identified potentially fungal isolates is able to improve the efficiency of metal biosorption. These strains are recommended for development of consortia could become a best technique for MSW leachate treatment if its reliability and applicability should be verified prior to technology acceptance.     

In situ formation of AgNPs on <Emphasis Type="Italic">S. cerevisiae</Emphasis> surface as bionanocomposites for bacteria killing and heavy metal removal

Novel bionanocomposites, S. cerevisiae–AgNPs, were synthesized by in situ formation of AgNPs on S. cerevisiae surface using fulvic acids as reductants under simulated sunlight. S. cerevisiae–AgNPs were characterized using UV–Vis spectroscopy, scanning electron microscope, transmission electron microscope and Fourier transform infrared spectroscopy. These analyses showed that AgNPs were distributed on the surface of S. cerevisiae. The application of S. cerevisiae–AgNPs in bacteria killing and heavy metal removal was studied. S. cerevisiae–AgNPs effectively inhibited the growth of E. coli with increasing concentrations of S. cerevisiae–AgNPs. E. coli was killed completely at high concentration S. cerevisiae–AgNPs (e.g., 100 or 200 µg mL^?1). S. cerevisiae–AgNPs as excellent heavy metal absorbents also have been studied. Using Cd²⁺ as model heavy metal, batch experiments confirmed that the adsorption behavior fitted the Langmuir adsorption isotherms and the Cd²⁺ adsorption capacity of S. cerevisiae–AgNPs was 15.01 mg g^?1. According to adsorption data, the kinetics of Cd²⁺ uptake by S. cerevisiae–AgNPs followed pseudo second-order kinetic model. Moreover, S. cerevisiae–AgNPs possessed ability of different heavy metals’ removal (e.g., Cr⁵⁺, As⁵⁺, Pb²⁺, Cu²⁺, Mn²⁺, Zn²⁺, Hg²⁺, Ni²⁺). The simulated contaminated water containing E. coli, Cd²⁺ and Pb²⁺ was treated using S. cerevisiae–AgNPs. The results indicated that the bionanocomposites can be used to develop antibacterial agents and bioremediation agents for water treatment.     

Lead and nickel biosorption with a fungal biomass isolated from metal mine drainage: Box–Behnken experimental design

The Pb(II) and Ni(II) biosorption of a fungal biomass isolated from mine drainage of metal-processing industries in Balya (Bal?kesir province, Turkey) was optimized using a response surface methodology by altering parameters such as pH, initial metal concentration, contact time and biosorbent dosage. This strain was shown to be highly similar to Penicillium sp. Furthermore, zeta potential measurements and Fourier transform infrared spectroscopy were performed to understand the adsorption mechanism. A Box–Behnken design with 29 experiments was used to evaluate the interactions between independent variables. The results showed that the fungal biomass isolated from the metal mine drainage could have a significant environmental impact through the biosorption of Pb(II) and Ni(II) in waters polluted with heavy metals, particularly in the drainage from metal mines. The maximum removal values were 76 and 47 % at pH 4.5 for both Pb(II) and Ni(II), with 123 and 33 mg/L initial metal concentrations, 65 and 89 min contact times and 0.2 and 1.6 g/L biosorbent, respectively.     

Readily dispersible clay and its role in the mobility of transition metals Cd2+, Cu2+ and Zn2+ in an alkaline alluvial soil

Readily dispersible clay is the part of the clay fraction in soils that potentially disperses in water when a small amount of mechanical energy is applied to soil. Column and batch experiments were conducted to identify the effect of readily dispersible clay on the mobility of some metal ions in a disturbed soil sample. The clay fraction (<0.002 mm) was separated from an alkaline Vertisol from the Nile River Delta. X-ray diffraction technique was used to identify minerals present in the clay fraction. Clay suspensions and deionized H₂O solutions of Cd²⁺, Cu²⁺, and Zn²⁺ were prepared and used as influents in soil columns. Adsorption capability of the studied soil among the three metal ions was investigated. The results showed high adsorption capacity of Cd²⁺, Cu²⁺, but not Zn²⁺ for the studied soil. Cu²⁺ was the highest adsorbed metal by soil and its sorption increased at small equilibrium concentrations compared with Cd²⁺ and Zn²⁺. For the three studied metal ions, Langmuir model represented the best fit to the adsorption data. The concentration of Zn²⁺ and Cd²⁺ in leachates increased as the leaching solution volume increased, while Cu²⁺ showed a homogeneous distribution throughout the soil column. According to DTPA extractable metals, Zn²⁺ was appeared at greater depths than Cd²⁺, while Cu²⁺ had homogeneous distribution through the soil column.     

Experimental Study on Surface Reactions of Heavy Metal Ions With Quartz—Aqueous Ion Concentration Dependence

Adsorption of divalent metal ions, including Cu²⁺, Pb²⁺, Zn²⁺, Cd²⁺ and Ni²⁺, on quartz surface was measured as a function of metal ion concentration at 30°C under conditions of solution pH= 6. 5 and ion strength I = 0. 1mol/L. Results of the experimental measurements can be described very well by adsorption isotherm equations of Freudlich. The correlation coefficients (r) of adsorption isotherm lines are > 0. 96. Moreover, the experimental data were interpreted on the basis of surface complexation model. The experimental results showed that the monodentate-coordinated metal ion surface complex species (SOM⁺) are predominant over the bidentate-coordinated metal ion surface complex species [(SO)₂M] formed only by the ions Cu²⁺, Zn²⁺ and Ni²⁺. And the relevant apparent surface complexation constants are lgK_M = 2.2–3.3 in order of K_Cd≥K_Pb > K_Zn > K_Ni≥K_Cu, and lgβ_M = 5.9-6.8 in order of β_Ni > β_Zn > β_Cu. Therefore, the reactive ability of the ions onto mineral surface of quartz follows the order of Cd > Pb > Zn > Ni> Cu under the above-mentioned solution conditions. The apparent surface complexation constants, influenced by the surface potential, surface species and hydrolysis of metal ions, depend mainly on the Born solvation coefficient of the metal ions. This project was financially supported by the National Natural Science Foundation of China (No. 49572091).     

Biosorption of 4-chlorophenol by dried anaerobic digested sludge: artificial neural network modeling,equilibrium isotherm,and kinetic study

In this study, dried anaerobic digested sludge (DADS) was utilized to remove 4-chlorophenol (4-CP) from aqueous solutions. Batch biosorption experiments were carried out to investigate the effects of physicochemical parameters such as pH, contact time, biosorbent dosage, and initial concentration. Artificial neural network (ANN) was then used to predict the removal efficiency of the process. The comparison between predicted and experimental results provided a high degree of determination coefficient (R² = 0.98), indicating that the model could predict the biosorption efficiency with reasonable accuracy. Biosorption data were successfully described by the Freundlich isotherm and pseudofirst-order model. The Weber–Morris kinetic model indicated that intraparticle diffusion was not the only rate-controlling step, and other mechanisms may be involved in the biosorption process. The optimum pH was detected to be 3 for DADS. By increasing contact time and biosorbent dosage, the removal efficiency of 4-CP increased. Also, a decreasing trend was observed when initial concentrations were increased. The findings suggested that the results predicted by ANN are very close to the experimental values, and DADS as an available adsorbent can efficiently remove 4-CP from aqueous solutions.     

Theoretical investigations of the local structures and the <Emphasis Type="Italic">g</Emphasis> factors for 3d<Superscript>9</Superscript> ions in CdS

The local structures and the g factors g _// and g _⊥ for the isoelectronic 3d⁹ ions Cu²⁺ and Ni⁺ in CdS are theoretically investigated from the perturbation formulas of these parameters for a 3d⁹ ion under trigonally distorted tetrahedral environments. In consideration of significant covalency of the [MS₄] combinations (M = Cu and Ni), the ligand orbital and spin–orbit coupling contributions are taken into account using the cluster approach. Based on the studies, the substitutional impurity Cu²⁺ (or Ni⁺) on Cd²⁺ site is found to undergo a small inward displacement 0.026 Å (or a slight outward shift 0.017 Å) towards (or away from) the ligand triangle along C ₃ axis. The theoretical g factors for both ions based on the above impurity displacements are in good agreement with the experimental data.     

Biosorption of cadmium(II), lead(II) and cobalt(II) from aqueous solution by biochar from cones of larch (<Emphasis Type="Italic">Larix decidua</Emphasis> Mill. <Emphasis Type="Italic">subsp. decidua</Emphasis>) and spruce (<Emphasis Type="Italic">Picea abies</Emphasis> L. H. Karst)

Because of their physicochemical properties, biochars can be used as sorption materials for removal of toxic substances. The purpose of the present study was to determine whether biochar obtained from cones of larch (Larix decidua Mill. subsp. decidua) and spruce (Picea abies L. H. Karst) could be used as a sorbent for Cd²⁺, Pb²⁺ and Co²⁺ in aqueous solutions. So far, this feedstock had not been tested in this respect. The material was subjected to pyrolysis at 500 and 600 °C for the duration of 5, 10 and 15 min. The obtained pyrolysates were found to differ in terms of pH and the contents of the essential macroelements. The different values of these parameters were determined for varying temperature, duration of the pyrolysis process and type of feedstock. Sorption capacities of the biochars for removal of Cd²⁺, Pb²⁺ and Co²⁺ were examined using simulated contamination of aqueous solutions with salts of these metals. The findings showed the highest, nearly complete, removal for Pb²⁺ were maximum 99.7%, and almost three times lower value for Cd²⁺ and Co²⁺ (respectively, 35.7 and 24.8%). It was demonstrated that pyrolysis of conifer cones produced optimum sorption capacities when the process was conducted at a temperature of 500 °C for the duration of 5 min. It was shown that products of spruce cone pyrolysis were characterized by better sorption capacity in comparison with products of larch cone pyrolysis. The properties of conifer cone biochar create the possibility of using it as an adsorbent in water and wastewater treatment as well as in production of filters and activated carbon.     

Effects of heavy metals on the performance of anaerobic sulfidogenic reactor using rape straw as carbon source

Effects of Zn²⁺, Cu²⁺ and Cd²⁺ in the synthetic acid mine drainage on the performance of the anaerobic sulfidogenic reactor using rape straw as carbon source were explored. Two different cases were respectively observed for the different metal dosages: stimulatory at lower concentrations and toxic/inhibitory at higher concentrations. Cellulose and hemicellulose were the major components hydrolyzed in the rape straw. Analysis of the heavy metals distribution in the anaerobic digested solid residue showed that adsorption and precipitation were the major mechanisms for the removal of heavy metals. This was also confirmed by the results of scanning electron microscopy and energy-dispersive spectrometry analysis.     

Geochemical evaluation and environmental application of Yemeni natural zeolite as sorbent for Cd<Superscript>2+</Superscript> from solution: kinetic modeling,equilibrium studies,and statistical optimization

Yemeni natural zeolite was characterized by XRD, SEM, FTIR and XRF as well as its applicability as a sorbent material for Cd²⁺ ions in aqueous solutions. The zeolitic sample is clinoptilolite-K of heulandite group with intermediate Si/Al ratio. The removal% of Cd²⁺ by natural clinoptilolite was investigated as a function of contact time, zeolite dose, pH and initial concentration of Cd²⁺ ions. Kinetic experiments indicated that sorption of Cd²⁺ follows two steps: rapid ion exchange process on the outer surface is followed by slow adsorption process on the inner surface of clinoptilolite. The equilibrium was attained after 120 min, and the results were fitted well with pseudo-second order and Elovich kinetic models. The Cd²⁺ removal% is strongly dependent on pH value and increases with the increasing pH value. Equilibrium sorption isotherm of Cd²⁺ by clinoptilolite was described well using the Langmuir, Freundlich, and Temkin isotherms models. However, the data relatively well fitted with Freundlich model (R ² = 0.97) rather than by the other models. Response surface methodology in conjunction with central composite rotatable statistical design was used to optimize the sorption process. The model F-value indicated the high significance of second-order polynomial model to represent the interaction between the operating parameters. From the Design Expert’s optimization function, the predicted optimum conditions for maximum removal% of Cd²⁺ (80.77%) are 116 min contact time, 0.27 gm dose, and pH 7 at an initial Cd²⁺ concentration of 25 mg/L.     

Adsorption of lead, zinc and cadmium ions from contaminated water onto Peganum harmala seeds as biosorbent

Peganum harmala seeds were assessed as biosorbent for removing Pb²⁺, Zn²⁺and Cd²⁺ ions from aqueous solutions. The effects of various parameters such as the aqueous solution pH, the contact time, the initial metal concentration and the amount of adsorbent in the process were investigated. The adsorption efficiencies increased with pH. It was found that about 95 % of lead, 75 % of zinc and 90 % of cadmium ions could be removed from 45 ml of aqueous solution containing 20 mg l^?1 of each cation with 2 g of adsorbent at pH 4.5 after 15 min. The quantitative desorption of cadmium from adsorbent surface was achieved using 10 ml of a 0.5 M nitric acid solution. This condition was attained for lead and zinc ions with 10 ml of 1 M hydrochloric acid solution. Kinetic investigation of the process was performed by considering a pseudo-second-order model. This model predicts the chemisorption mechanism of the process. Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models were tested for describing the equilibrium data. It was found that the Freundlich model describes the experimental data resulting from the adsorption of lead ions. However for cadmium and zinc ions, the adsorption equilibria were interpreted with the Langmuir model.     

Biosorption of Cr(III) and Cr(VI) species from aqueous solution by Cabomba caroliniana: kinetic and equilibrium study

This study reports the potential ability of non-living biomass of Cabomba caroliniana for biosorption of Cr(III) and Cr(VI) from aqueous solutions. Effects of contact time, biosorbent dosage, pH of the medium, initial concentration of metal ion and protonation of the biosorbent on heavy metal–biosorbent interactions were studied through batch sorption experiments. Cr(III) was sorbed more rapidly than Cr(VI) and the pH of the medium significantly affected the extent of biosorption of the two metal species differently. Surface titrations showed that the surface of the biosorbent is positively charged at low pH while it is negatively charged at pH higher than 4.0. Protonation of the biosorbent increased its capacity for removal of Cr(III), while decreasing that of Cr(VI). FT-IR spectra of the biosorbent confirmed the involvement of –OH groups on the biosorbent surface in the chromium removal process. Kinetic and equilibrium data showed that the sorption process of each chromium species followed pseudo second-order kinetic model and both Langmuir and Freundlich isothermal models. A possible mechanism for the biosorption of chromium species by non-living C. caroliniana is suggested.     

Biosorption of ammoniacal nitrogen from aqueous solutions with low-cost biomaterials: kinetics and optimization of contact time

The biosorption of ammoniacal nitrogen (N-NH₄ ⁺) from aqueous solutions by dead biomass of brown seaweed Cystoseira indica and Jatropha oil cake (JOC), which is generated in the process of biodiesel recovery from its seeds, was studied under diverse experimental conditions. The N-NH₄ ⁺ biosorption was strictly pH dependent, and maximum uptake capacity of C. indica (15.21 mg/g) and JOC (13.59 mg/g) was observed at initial pH 7 and 3, respectively. For each biosorbent–N-NH₄ ⁺ system, kinetic models were applied to the experimental data to examine the mechanisms of sorption and potential rate-controlling steps. The generalized rate model and pseudo-second-order kinetic models described the biosorption kinetics accurately, and the sorption process was found to be controlled by pore and surface diffusion for these biosorbents. Results of four-stage batch biosorber design analysis revealed that the required time for the 99 % efficiency removal of 40 mg/L N-NH₄ ⁺ from 500 L of aqueous solution were 76 and 96 min for C. indica and JOC, respectively. The Fourier transform infrared spectroscopy analysis before and after biosorption of ammonium onto C. indica and JOC revealed involvement of carboxylic and hydroxyl functional groups.     

Influence of operating conditions on the removal of Cu, Zn, Cd and Pb ions from wastewater by adsorption

Nile Rose Plant was used to study adsorption of several cations (Cu²+, Zn²+, Cd²+ and Pb²+) from wastewater within various experimental conditions. The dried leaves of Nile Rose Plant were used at different adsorbent/ metal ion ratios. The influence of pH, contact time, metal concentration, and adsorbent loading weight on the removal process was investigated. Batch adsorption studies were carried out at room temperature. The adsorption efficiencies were found to be pH dependent, increasing by increasing the pH in the range from 2.5 to 8.5 exept for Pb. The equilibrium time was attained within 60 to 90 min. and the maximum removal percentage was achieved at an adsorbent loading weight of 1.5 g/50 mL mixed ions solution. Isothermal studies showed that the data were best fitted to the Temkin isotherm model. The removal order was found to be Pb²⁺> Zn²⁺> Cu²⁺> Cd²⁺. The surface IR-characterization of Nile rose plant showed the presence of many functional groups capable of binding to the metal cations.