大埋深高地应力关山隧道围岩变形破坏分析

甘肃省关山隧道是一条受高地应力影响的大埋深硬脆性闪长岩铁路隧道,位于青藏高原东北缘,构造活跃,运动速率较大,且方向变化显著的六盘山挤压隆升构造区。在隧道开挖过程中围岩变形破坏现象明显,围岩等级低于前期岩体质量分级,表现出强烈的岩体质量劣化和各向异性。针对该问题,除了采用矿物成分和微结构分析寻找原因,还通过现场结构面统计分析对围岩质量劣化和各向异性进行描述,同时运用自行研发的钻孔电视进一步分析开挖前后一定时间间隔内围岩的渐进式变形和破坏。钻孔电视试验结果表明,尽管闪长岩作为一种硬脆性岩体,单轴抗压强度（UCS）高于现场地应力值,但其变形和破坏却普遍发生,开挖过程中新生裂隙迅速发育,原先在高地应力下闭合的裂隙也会重新张开和发展,围岩劣化,稳定性降低。为了进一步分析围岩的变形破坏过程,设计了变压力大小和方向的单轴抗压试验,试验中闪长岩的单轴压力值低于单轴抗压强度,试验结果与钻孔电视试验观测结果吻合,证明了在开挖引起的地应力剧烈变化条件下硬脆性闪长岩结构劣化,存在变形破坏的可能性。在大埋深高地应力条件下,除了岩体的各向异性,地应力的变化也是硬脆性围岩稳定性的重要考量因素。     

Effect of Excavation-Induced Groundwater Level Drawdown on Tunnel Inflow in a Jointed Rock Mass

Analytical and empirical methods used in current engineering practice for estimating inflow rate into a tunnel do not adequately account for the effect of groundwater level drawdown which triggers changes of the flow pattern as well as reductions of the hydraulic head. When there is no reservoir or a large body of water near the tunnel alignment, the groundwater recharge above the tunnel might not be fast enough to avoid a significant excavation-induced water level drawdown. This paper provides analytical methods for estimating groundwater inflow rate taking into account the groundwater table drawdown. The proposed analytical solutions presented here compare well with field observations as well as with results from numerical analysis using distinct element method which can adequately simulate the hydro-mechanically coupled behavior of joints in a rock mass.     

Influence of rock mass properties on tunnel inflow using hydromechanical numerical study

One of the primary geotechnical problems encountered during tunnel construction involves the inflow of groundwater into the tunnel. Heavy inflows make tunnel construction difficult and result in higher costs and delays in construction period. Therefore, it is essential to estimate the volume and rate of water inflow that is likely to appear in the tunnel. In this research, water inflow to the tunnel was calculated using numerical hydromechanical analysis. Effect of rock mass properties including fracture characteristics (normal and shear stiffness, hydraulic aperture, dilation angle, and fracture nonlinear behavior) on inflow was studied using a two-dimensional distinct element method. Results show that fracture properties play important role in inflow to the tunnel and must be considered in prediction of inflow to the tunnel. Based on numerical analysis results, inflow of groundwater into the tunnel increases with the increasing of normal and shear stiffness, dilation angle, and hydraulic aperture of rock mass fractures. The measured inflow with considering nonlinear fracture behavior was more than the calculated inflow with linear constitutive behavior.     

金丽温高速公路连拱隧道超挖预测及原因分析

通过对金丽温高速公路连拱隧道的地质特征进行现场调查,经分析得出隧道区岩体结构面的特征参数,利用分析出的结构面特征参数值,结合隧道超挖预测中的神经网络理论及结构面网络模拟理论,对连拱隧道的超挖情况进行预测。从分析结果看,超挖问题在连拱隧道的施工过程中不可避免,其产生部位主要集中在中导洞与隧道的连接部位,通过预测得出的结果与现场开挖情况进行对比分析说明,隧道的超挖预测理论预测结果与实际有较好的一致性,文中最后针对隧道的特点,分析了产生超挖的基本原因,为确保隧道开挖过程中减少超挖提供依据。     

Prediction of water inflow into underground excavations in fractured rocks using a 3D discrete fracture network (DFN) model

Groundwater flow is a major issue in underground opening in fractured rocks. Because of finding the fracture connectivity, contribution of each fracture in flow, and fracture connectivity to excavation boundary, the prediction of water flow to underground excavations is difficult. Simulation of fracture characteristics and spatial distribution is necessary to obtain realistic estimation of inflow quantity to tunnel and underground excavations. In this research, a computer code for three-dimensional discrete fracture network modeling of water inflow into underground excavations was developed. In this code, the fractures are simulated as ellipsoid while geometrical properties of the fractures are reproduced using a stochastic method. Properties such as the size, orientation, and density of the fractures are modeled by their respective probability distributions, which are obtained from field measurements. According to the fracture condition, the flow paths in rock mass are determined. The flow paths are considered as channels with rectangular sections in which channel width and fracture aperture determine geometry of channel section. Inflow into excavation is predicted ignoring matrix permeability and considering the hydrogeological conditions. To verify presented model, simulation results were compared to a part of the Cheshmeh-Roozieh water transfer tunnel in Iran. The results obtained from this research are in good agreement with the field data. Thus, the average of the predicted inflow has just an approximation error equal to 17.8%, and its standard deviation is 8.6 l/s, which is equal to 21% of the observed value that demonstrates low dispersion of the predicted values.     

深部复合地层TBM开挖扰动模型试验研究

针对全断面隧道掘进机（TBM）开挖过程掌子面岩体软硬交替变化的特点,以兰州水源地建设工程为背景,采用模型试验与数值模拟方法研究了复合地层TBM开挖过程隧洞围岩的动态响应规律。通过开展相似配比试验配制了不同围岩强度比的复合地层岩体相似材料,运用光纤光栅技术全程捕捉了隧洞开挖过程复合地层应变演化规律,并分析了隧洞围岩的宏观破裂形态。模型试验结果表明：TBM推进过程中复合地层应变变化规律体现了掌子面推进的空间效应,软岩部分应变要大于硬岩部分应变,且随着开挖步数的增加两种岩层应变差值越大;隧洞内岩体完全挖除后,围岩宏观破裂形态表明因复合地层岩体物理力学性质的差异,上覆软岩变形破坏较为严重,破裂和变形较为显著,在软、硬岩层交界面出现“变形不协调”现象。选取工程沿线某洞段的地质力学参数,基于破坏接近度（FAI）指标评价了隧洞开挖过程中复合地层围岩的稳定性,数值结果表明：开挖过程软岩中FAI变化较为明显,塑性区和破坏区分布范围更广,而下部硬岩受开挖扰动影响较小,只有拱底小范围岩体进入破坏状态。模型试验和数值结果均说明交替变化的掌子面岩体在开挖过程中其围岩在变形破坏等规律方面存在明显差异,因此,TBM在复合地层施工可采取重点部位监测预警、提前采取相应措施等手段,减少或避免卡机事故的发生。该研究成果对于指导复合地层TBM施工具有一定的借鉴和指导意义。     

裂隙岩体渗透性影响因素的研究

采用UDEC离散单元法中关于裂隙岩体开挖模拟及水力全耦合分析模型,分析裂隙岩体洞室开挖后,因围岩应力与水力耦合作用导致裂隙隙宽变化及渗流变化的过程。为了更直观地了解耦合作用对裂隙岩体渗透特性的影响,以隧洞开挖为例,用开挖后隧洞内总涌水量来表征岩体的渗透特性。利用数值试验的方法,研究了块体边界大小、初始应力比、裂隙隙宽和裂隙夹角对开挖后隧洞内涌水量变化的影响,进而可以看出它们对裂隙岩体渗透性的影响。并得出如下结论：随着块体尺寸和初始应力比的增大,隧洞内总涌水量减少;随初始隙宽的增大涌水量增加并当达到某一固定值时保持不变;隧洞涌水量在θ2/θ1=3.5,其中θ1=30°,即两组节理的夹角为75°处达到最大。     

岩溶地区隧道裂隙水突出力学机制研究

岩溶地下水是诱发隧道发生突（涌）水地质灾害的主导因素之一,岩溶裂隙水对隧道围岩的危害越来越成为岩溶地区隧道建设中的热点研究问题之一。基于目前岩溶裂隙水突出机制研究现状,运用岩溶地质学、工程水力学和断裂力学相关理论分析岩溶地区隧道水岩相互作用机制,探讨了水岩相互作用对岩溶地区隧道施工发生突（涌）水的影响,揭示岩溶地区隧道裂隙水突出前后过程的力学机制。研究表明：岩溶隧道裂隙水突出是裂隙岩体在岩溶水及水压的持续作用下受施工外力干扰发生劈裂的结果,岩溶水和水压在裂隙岩体突水破坏过程中的力学作用主要体现在4个方面,即突水蓄势期岩溶水对裂隙岩体的软化溶蚀作用、水压对裂隙岩体的劈裂作用,突水失稳期水流的冲刷扩径作用、水压对突水量的动力控制作用。基于上述分析,以断裂力学、弹塑性力学理论为基础,提出岩溶隧道岩溶裂隙水突出的最小岩石防突厚度概念,推导了其半解析解表达式,并为工程实例所验证,其结果可为高风险岩溶地区隧道突水理论与防治措施提供参考。     

基于DDA方法一种流-固耦合模型的建立及裂隙体渗流场分析和应用

以非连续变形分析方法（DDA）为基础并采用稳态流体计算方法将二者结合进行裂隙岩体流-固耦合分析。利用DDA方法生成裂隙岩体模型,在此基础上采用矩阵搜索等方法形成新的裂隙水通网络模型。采用稳态迭代算法和立方定律求得裂隙水压力,并把裂隙水压力作为线载荷施加到块体边界,在DDA算法中每个迭代步完成后更新裂隙开度和水压值,与DDA算法结合研究裂隙水与块体之间相互作用关系。利用以上裂隙岩体流-固耦合计算方法研究了某水封油库开挖和运行过程洞室围岩流量和密封性,为该工程预测水封效果提供了有益的主要依据,也是国内首次采用DDA方法做大型工程的流-固耦合模型分析。     

花岗岩隧道脆性破坏的温度效应研究

目前深埋硬岩隧道的岩爆等脆性破坏研究还较少考虑到温度的作用效应。采用精细网格数值模型,提出热-脆性-精细力学计算方法,应用能反映高地应力下硬岩脆性破坏特点的岩体劣化模型,结合能量计算指标,开展了不同温度作用下隧道硬岩脆性破坏的热力耦合分析。以瑞典APSE花岗岩隧洞岩柱为例,进行不同地温下隧道破坏区、能量释放值和应力指标的定量化对比研究。研究结果表明,隧道地温的增加将使岩体产生附加温度应力,进而增大其脆性破坏程度,计算结果与隧道现场的破坏规律基本一致。热-脆性-精细力学计算能合理描述硬岩的损伤和渐进破坏过程,计算结果较好地揭示了花岗岩等硬岩深埋隧道脆性破坏的温度作用效应,对于高应力、高地温下深部工程的稳定性评价具有指导意义。     

岩爆与围岩分类

岩爆是高地应力条件下完整脆性硬质围岩失稳的一种表现型式,岩爆烈度如何影响围岩类别尚不清楚,探索岩爆与围岩分类的关系,对准确判别高地应力条件下的围岩类别有着重要意义。本文以某深埋隧洞围岩分类为依据,对我国水利水电地下洞室围岩分类中岩爆烈度与围岩类别的关系、岩爆判别指标的选取等问题进行了探讨。     

The Investigation of Twin Tunnel Stability: Effect of Spacing and Diameter

The underground excavation became the backbone of developing as well as developed country due to unavailability of surface area and increase demand of space for transportation, water channeling, waste disposal and storage. Except for transportation, the crystalline rocks (high strength, low porosity and less permeability) are considered most suitable and safe space for the storage of radioactive waste as well as petroleum. The role of spacing between twin tunnel and tunnel’s diameter in its stability was carried out using finite element method. Not much research has been done on twin tunnel spacing in hard rock. In the present study, a total of ninety simulations were performed to investigate critical spacing of the twin tunnel in granitic rock mass. Twin tunnel diameter is varied from the 2 m to 10 m and their spacing varied from 0.2 to 2 times of diameter. It was concluded that minimum spacing should be 0.8 times of the tunnel diameter. It was also found that small diameter tunnel effects only near field but large diameter tunnel effect near field as well as far field. The vertical hole, approximately 3m diameter, containing radioactive waste canister should be drilled at the interval of more than 2.4m.     

隧道掘进面接近地质界面时围岩的应力特征研究

隧道开挖地层中往往呈现出明显的地质变异性,如软硬岩层的不均匀分布等,使隧道开挖后的力学行为十分复杂.本文采用FLAC3D初步分析了隧道掘进面接近地质界面时围岩的应力状态,并探讨侧向应力、纵向应力、断面形式对围岩应力的影响规律.分析结果表明:当隧道由硬岩往软岩或由软岩往硬岩向地质界面掘进时,掘进面前方围岩均有应力集中现象.隧道无论由硬岩往软岩还是由软岩往硬岩掘进至地质界面时,掘进面前方边墙位置围岩径向应力均随侧向应力的增大而增大,掘进面前方拱顶和边墙位置围岩纵向应力均随纵向应力的增大而增大.马蹄彤隧道开挖至硬岩与软岩的地质界面时,掘进面后方边墙位置围岩应力均小于圆形隧道相应位置的围岩应力.     

Engineering geological assessment of the proposed Uru Dam, Turkey

This paper describes the results of the engineering geological investigations and rock mechanics studies carried out at the proposed Uru Dam site. Analyses were carried out in terms of rock mass classifications for diversion tunnel, kinematic analysis of excavation slopes, permeability of the dam foundation and determination of rock mass strength parameters.Uru Dam is a rock-filled dam with upstream concrete slab. The dam will be built on the Suveri River in the central part of Turkey. The foundation rocks are volcanic rocks, which consist of andesite, basalt and tuff of Neogene Age. Studies were carried out both at the field and the laboratory. Field studies include engineering geological mapping, intensive discontinuity surveying, core drilling, pressurized water tests and sampling for laboratory testing.Uniaxial, triaxial and tensile strength tests were performed and deformation parameters, unit weight and porosity were determined on the intact rock specimens in the laboratory. Rock mass strength and modulus of elasticity of rock mass are determined using the Hoek–Brown empirical strength criterion. Rock mass classifications have been performed according to RMR and Q systems for the diversion tunnel.Engineering geological assessment of the proposed dam and reservoir area indicated that there will be no foundation stability problems. Detailed geotechnical investigations are required for the final design of the dam.     

糯扎渡水电站1#导流隧洞三维非线性有限元开挖模拟分析

糯扎渡水电站1#导流隧洞开挖经过F3断层,开挖过程中,F3断层影响带附近的岩体力学参数直接控制着围岩的变形和应力分布。为了评判后续Ⅱ,Ⅲ层开挖围岩的稳定性,首先利用隧洞第Ⅰ层开挖的位移监测数据反演出F3断层附近围岩的岩体力学参数和初始地应力场;然后,利用反演得到的初始地应力场和岩体力学参数进行Ⅰ,Ⅱ,Ⅲ层开挖模拟分析,得到了F3断层附近围岩的应力变形情况。计算结果表明：随着开挖的不断进行,隧洞F3断层周围岩体的约束逐渐解除,围岩的应力逐渐增大,隧洞周边的位移也不断增大,并且隧洞周围应力变形在F3断层中心区域有明显的错动现象,说明F3断层对隧洞的开挖影响比较大,有必要对此区域后期变形加强观测和分析。     

隧洞断层破碎带岩体涌水量分析——安哥拉某水电站为例

隧道涌水量预测对隧道的设计和施工至关重要.笔者以安哥拉某水电站进厂交通洞涌水为例,基于涌水发生后实测的涌水量、水温、水化学、附近地下水位变化等特征,分析涌水成因.根据涌水洞段岩体透水性的不同,将隧洞断层区岩体划分为3个透水性段.根据建立的模型,采用流体力学伯努利方程对最大涌水量进行估算;利用稳定流裘布依理论公式对正常涌...     

水-力耦合作用下三趾马红土围岩变形特征研究

以地下水位线以下的石楼隧道典型三趾马红土围岩段为例,通过现场监测对三趾马红土围岩的体积含水量、孔隙水压力、围岩应力（土压力）、拱顶沉降与水平收敛进行了分析。在此基础上,通过原位大剪试验获得了可靠的围岩抗剪强度参数,并建立了隧道三维有限元数值模型,分别对考虑水-力耦合效应、不考虑水-力耦合效应的三趾马红土围岩变形规律进行了探讨,分析了孔隙水压力随着隧道开挖的变化和三趾马红土围岩位移场、应力场受水-力耦合效应的影响程度,并提出了围岩破坏变形机制。结果表明:（1）实测拱顶下沉大于围岩水平变形,围岩应力可分为增长期（ < 20d）、调整期（20~60d）、稳定期（>60d）3个阶段,且整体应力水平较高,下台阶含水量大于上台阶,孔隙水压力经历了由负变正的过程。（2）现场剪切试验所测围岩的黏聚力为64.0kPa,内摩擦角为27.7°。（3）数值分析表明,隧道开挖后孔隙水压力场变化十分明显,这是由地下水流速场的改变引起的,水力坡降在衬砌面附近最为明显,渗透动水压力导致土体产生一定的渗透变形;考虑水-力耦合后围岩剪应力、最大剪应变、拱顶沉降、水平收敛、底板隆起均较大。（4）受开挖及支护的影响,地下水产生渗流并依次经过拱顶、边墙,最终汇集于隧底;受开挖、地下水渗流的影响,围岩节理裂隙进一步扩张,成为地下水良好的运移通道;围岩的有效应力随着孔隙水压力的减小而增大,围岩的力学强度在土体趋于饱和状态时骤降,反过来,高有效应力、低围岩强度以及贯通性节理裂隙三者共同改变着地下水渗流场的状态。（5）为保障围岩整体稳定性,建议及时排出隧道底部积水并施做仰拱。