相邻结构地震反应MR阻尼器控制的仿真分析

本文仿真分析了应用磁流变(MR)阻尼器对相邻结构地震反应的控制效果,为进一步开展模型试验研究奠定了基础。建立了地震激励下相邻结构MR阻尼器控制系统的运动方程,提出了描述MR阻尼器阻尼力滞回特性的改进S igmoid模型,分别对应用开关控制、半主动控制以及最小或最大电流被动控制的四种控制方法的相邻结构地震反应的控制效果进行了仿真分析。结果表明,在相邻结构间连接安装MR阻尼器可以有效地控制相邻结构的地震反应,且开关控制方法和半主动控制方法的控制效果均好于两种被动控制方法,体现了MR阻尼器阻尼力可调的优点;在四种控制方法中,半主动控制方法的控制效果最好,体现了MR阻尼器阻尼力具有连续调节能力的优点;若能解决MR阻尼器的剩磁问题,半主动控制方法的控制效果会得到进一步的提高。     

Fuzzy logic control of bridge structures using intelligent semi-active seismic isolation systems

Passive supplemental damping in a seismically isolated structure provides the necessary energy dissipation to limit the isolation system displacement. However, damper forces can become quite large as the passive damping level is increased, resulting in the requirement to transfer large forces at the damper connections to the structure which may be particularly difficult to accommodate in retrofit applications. One method to limit the level of damping force while simultaneously controlling the isolation system displacement is to utilize an intelligent hybrid isolation system containing semi-active dampers in which the damping coeffic ient can be modulated. The effectiveness of such a hybrid seismic isolation system for earthquake hazard mitigation is investigated in this paper. The system is examined through an analytical and computational study of the seismic response of a bridge structure containing a hybrid isolation system consisting of elastomeric bearings and semi-active dampers. Control algorithms for operation of the semi-active dampers are developed based on fuzzy logic control theory. Practical limits on the response of the isolation system are considered and utilized in the evaluation of the control algorithms. The results of the study show that both passive and semi-active hybrid seismic isolation systems consisting of combined base isolation bearings and supplemental energy dissipation devices can be beneficial in reducing the seismic response of structures. These hybrid systems may prevent or significantly reduce structural damage during a seismic event. Furthermore, it is shown that intelligent semi-active seismic isolation systems are capable of controlling the peak deck displacement of bridges, and thus reducing the required length of expansion joints, while simultaneously limiting peak damper forces. Copyright © 1999 John Wiley & Sons, Ltd.     

Experimental test of asymmetrical cable-stayed bridges using MR-damper for vibration control

In this paper, a semi-active control by MR-damper is researched; its purpose is to effectively control vibration of asymmetrical cable-stayed bridges when earthquake is loaded on the type of bridge. For an experimental study, a model of 10.2 m high and 28 m long asymmetrical cable-stayed bridge structure was built being similar to a real one in size and function. A MR damper was also designed in proper size suitable for the control of the model. The experiment was performed in the way in which three piers were fixed on three shaking tables with 30% of El-centro earthquake wave, and a control device was placed on the lower part of its upper deck for horizontal control. As for control algorithms, Lyapunov and Clipped-optimal control algorithms were applied. The effectiveness of the semi-active control with MR damper for the asymmetrical cable-stayed bridge was measured under five control conditions: Un-control, Passive-off, Passive-on, Lyapunov Control, Clipped-optimal Control. The experiment showed that the semi-active control applying Lyapunov and Clipped-optimal algorithms effectively increased controllability almost in double, and decreased displacement 75% compared with the condition of passive-off. Therefore the semi-active method suggested in this paper is proven effective in controlling asymmetrical cable-stayed bridges.     

Semi-active control of the benchmark highway bridge based on seismic early warning systems

Possible interactions between seismic early warning systems and structural control are herein investigated. A SEWS can provide the knowledge of some parameters, ahead of time, of the seismic event that is going to occur in a certain site. Current research activities on SEWS include the estimate of the anticipated peak ground acceleration (PGA) and the acceleration response spectrum (S_a) of an incoming earthquake. This paper proposes the exploitation of this information in the framework of semi-active (SA) control strategies, by using magnetorheological dampers. The latter are time-varying properties devices able to achieve a wide range of physical behaviours using low-power electrical currents. The main idea of this work consists in changing the MR damper behaviour according to the forecasted intensity of an incoming earthquake provided by the SEWS, in order to obtain the optimal seismic response of the hosting structure. This is investigated assuming a case-study problem. It consists in the 91/5 highway bridge located in Orange County of southern California and proposed in literature as a benchmark structure for applications in the field of structural control. The effectiveness of the proposed control strategy is assessed and compared to more consolidated control techniques.     

Seismic response control of frame structures using magnetorheological/electrorheological dampers

Semi‐active control of buildings and structures for earthquake hazard mitigation represents a relatively new research area. Two optimal displacement control strategies for semi‐active control of seismic response of frame structures using magnetorheological (MR) dampers or electrorheological (ER) dampers are proposed in this study. The efficacy of these displacement control strategies is compared with the optimal force control strategy. The stiffness of brace system supporting the smart damper is also taken into consideration. An extensive parameter study is carried out to find the optimal parameters of MR or ER fluids, by which the maximum reduction of seismic response may be achieved, and to assess the effects of earthquake intensity and brace stiffness on damper performance. The work on example buildings showed that the installation of the smart dampers with proper parameters and proper control strategy could significantly reduce seismic responses of structures, and the performance of the smart damper is better than that of the common brace or the passive devices. The optimal parameters of the damper and the proper control strategy could be identified through a parameter study. Copyright © 2000 John Wiley & Sons, Ltd.     

高架桥地震反应半主动控制分析

本文探讨了高架桥结构地震反应LQR(Linear Quadratic Regulator)半主动控制算法以及考虑刚度退化的桥墩非线性计算模型，并利用Matlab语言编制的程序对其进行了数值仿真计算。结果表明，将隔震技术与利用MR阻尼器的半主动控制技术相结合，能够有效地减小高架桥的地震反应；MR阻尼器的设置位置以及结构的参数对控制效果有较大影响。考虑桥墩非线性影响将能得到更为接近实际的计算结果。     

半主动磁流变阻尼控制结构的地震反应分析

本文对磁流变阻尼器的性能及恢复力模型进行了介绍,并对其参数进行了设计,提出了基于现代最优控制理论的半主动控制方法．计算实例分析结果表明,采用磁流变阻尼器对结构进行半主动控制能够有效地减小结构的地震反应．     

行波效应对桥梁不同振动控制方法减震效果的影响分析

给出了地震行波输入下大跨度桥梁的主动、半主动和被动控制分析方法,并对1座4跨连续刚构桥梁进行了行波输入下地震反应计算,分析了8种振动控制情况下纵桥向和横桥向地震反应的减震效果。结果表明,行波效应会明显降低该连续刚构桥梁8种振动控制方法的纵桥向地震反应减震效果,最大开关控制算法对纵桥向的减震效果相对最好;最大阻尼力被动控制和最大开关控制算法对横桥向的减震效果相对最好,采用该2种控制方法时行波效应对横桥向总体减震效果影响不大。     

磁流变阻尼器的半主动控制及实时混合模拟试验研究

磁流变阻尼器作为一种比较典型的半主动控制元件,具有构造简单、响应速度快、耐久性好、阻尼力大且连续可调等优点。即使地震中能源中断,磁流变阻尼器仍可以作为被动耗能装置继续工作发挥作用,可靠性高。设计合理有效的磁流变阻尼器半主动控制方法,对于整体结构的减震效果尤其重要。提出一种改进的磁流变阻尼器的半主动控制策略-改进的Bang-Bang控制策略,对装有磁流变阻尼器的减震控制3层框架结构进行了一系列的实时混合模拟试验,对多种半主动控制方法下的振动控制效果进行试验分析。试验结果表明:磁流变阻尼器对框架结构的减震效果显著,并验证了提出的磁流变阻尼器半主动控制策略的有效性。     

地震作用下公路桥梁碰撞的半主动控制研究

针对地震作用下公路桥梁的碰撞问题,采用接触单元法模拟桥梁之间的碰撞作用,并在此基础上研究了采用磁流变阻尼器的公路桥梁碰撞的半主动控制方法。通过对某公路桥梁的数值模拟发现,地震作用下桥梁之间的相互碰撞,将大幅增加桥梁的绝对加速度响应。采用磁流变阻尼器的半主动控制系统能够较好地降低结构的地震响应和消除地震作用下的碰撞。     

基于AFSMC算法的结构非线性振动MR控制与仿真分析

作为最近发展起来的高性能半主动控制装置,磁流变阻尼器通过改变磁场强度来调节控制力,可靠度高,体积小,出力大,并且具有Fail-Safe的特点,是一种具有广泛应用前景的新型结构控制装置。本文主要研究结构非线性振动的磁流变阻尼半主动控制。首先采用我们提出的自适应模糊滑模控制(AFSMC)算法得到了结构非线性振动的主动控制力,然后参照主动控制力,提出和仿真实现了结构非线性振动的磁流变阻尼半主动控制。最后,针对3层和20层benchm ark非线性模型,每层均设置一个磁流变阻尼器,对在给定的地震动下的结构响应进行了计算,分析了半主动控制跟踪主动控制的效果,并且对于半主动控制下的结构位移响应、加速度响应等各项指标也进行了对比分析。仿真结果表明,由于自适应模糊滑模控制算法与半主动控制算法相结合可以很好地实现结构非线性振动的半主动控制,所以能够得到令人满意的控制结果。     

Semi‐active neuro‐control for base‐isolation system using magnetorheological (MR) dampers

Vibration mitigation using smart, reliable and cost‐effective mechanisms that requires small activation power is the primary objective of this paper. A semi‐active controller‐based neural network for base‐isolation structure equipped with a magnetorheological (MR) damper is presented and evaluated. An inverse neural network model (INV‐MR) is constructed to replicate the inverse dynamics of the MR damper. Next, linear quadratic Gaussian (LQG) controller is designed to produce the optimal control force. Thereafter, the LQG controller and the INV‐MR models are linked to control the structure. The coupled LQG and INV‐MR system was used to train a semi‐active neuro‐controller, designated as SA‐NC, which produces the necessary control voltage that actuates the MR damper. To evaluate the proposed method, the SA‐NC is compared to passive lead–rubber bearing isolation systems (LRBs). Results revealed that the SA‐NC was quite effective in seismic response reduction for wide range of motions from moderate to severe seismic events compared to the passive systems. In addition, the semi‐active MR damper enjoys many desirable features, such as its inherent stability, practicality and small power requirements. The effectiveness of the SA‐NC is illustrated and verified using simulated response of a six‐degree‐of‐freedom model of a base‐isolated building excited by several historical earthquake records. Copyright © 2006 John Wiley & Sons, Ltd.     

SEMI-ACTIVE TUNED MASS DAMPERS FOR SEISMIC PROTECTION OF CIVIL STRUCTURES

A semi-active tuned mass damper (TMD) which is capable of adjusting initial displacement and damping is applied to seismic protection of structures. Control algorithms are derived in closed forms using perturbation analysis on modal properties of the single degree of freedom (SDOF) structure/TMD system. Because perturbation solutions are given in a relatively simple form, the control algorithms are developed in a physically intuitive manner. In the first half of the paper, the control algorithms are introduced using numerical simulations of the impulse response. Then the algorithms are applied to seismic protection of civil structures using the strategy of multiple releasing and capturing of TMDs. The control strategy for seismic control is summarized in a flow chart. Numerical studies with the El Centro earthquake record show that the proposed semi-active method has higher performance than conventional passive TMDs.     

Neuro-fuzzy control strategy for earthquake-excited nonlinear magnetorheological structures

Magnetorheological (MR) damper is a prominent semi-active control device for earthquake responses mitigation of structures. The most important topic for the intelligent MR structures is choosing the control current of MR dampers quickly and accurately. The typical control strategy is on–off control strategy, i.e. bi-state control strategy, while inherent time-delay and coarse control precision lie in this strategy. This paper proposes neuro-fuzzy control strategy, in which the neural-network technique is adopted to solve time-delay problem and the fuzzy controller is used to determine the control current of MR dampers quickly and accurately. Through comparison between the bi-state control and the neuro-fuzzy control strategies and a numerical example about a three-story reinforced concrete structure, it can be concluded that the control strategy is very important for semi-active control, the neuro-fuzzy control strategy can determine currents of MR dampers quickly and accurately, and the control effect of the neuro-fuzzy control strategy is better than that of the bi-state control strategy.     

高架桥梁地震响应模糊半主动控制

提出了使用MR阻尼器（Magnetorheological Damper）作为控制设备，以模糊集为基础的半主动控制算法，研究了8种模糊控制规则在高架桥梁地震响应中的控制效果。本文提出的模糊方法的优势在于算法自身的鲁棒性、处理非线性问题的能力和不需要结构的精确数学模型，算法需要的输入变量少，模糊算法的输出直接控制MR阻尼器的输入电压，与LQR-clipped算法不同，MR阻尼器的输入电压可以是零与最大值之间的任意值。根据高架桥梁的结构特点，将典型的墩-支座-桥面结构简化为一个两自由度的线性系统，计算了El Centro地震激励下，MR模糊半主动控制的地震响应，并分别与没有控制及其他控制时的地震响应进行了对比，分析了各种控制算法的控制效果。研究结果表明，MR模糊半主动控制算法可以达到LQR-clipped半主动的控制效果，且模糊控制所需要的控制力较小，为有效地发挥MR阻尼器的功能提供了一种简单的半主动算法。     

带裙房高层建筑地震反应控制振动台试验研究

2002年9月在香港理工大学成功地进行了带裙房高层建筑地震反应控制试验研究。设计和制作的结构模型是带3层裙房的12层高楼剪切模型,在裙房顶层与主楼之间安装单MR阻尼器形成MR阻尼器耦联结构模型。MR阻尼器采用美国LORD公司摩擦型MR阻尼器,并且选用其配套产品计算机电流控制器对其进行控制,控制系统采用德国dSPACE公司实时控制系统。对独立主楼、独立裙房和原结构模型的动力特性进行了辨识;对结构模型进行了El Centro地震动作用下的地震反应振动台试验;以作者提出的MR阻尼器半主动逻辑控制算法,对MR阻尼器耦联的结构模型进行了地震反应振动台试验。试验结果表明：用MR阻尼器耦联主楼与裙房,采用半主动逻辑控制方法进行控制,能有效抑制主楼的鞭梢效应并使主楼和裙房的地震反应减小。     

工程结构地震响应模糊半主动控制

提出了使用MR阻尼器（Magnetorheological Damper）作为控制设备,模糊集为基础的半主动控制算法,并运用提出的算法对土木工程结构地震响应进行了振动控制分析.本文方法的优势在于算法自身的鲁棒性、处理非线性问题的能力和不需要结构的精确数学模型,算法需要的输入变量少,可以解决实际工程中结构响应信息难以测量的困难.模糊算法的输出直接控制MR阻尼器的输入电压,控制器的计算非常简单且易于在工程中实现.本文以一个3层框架结构为算例,分析了本文算法与前人研究算法的异同.数值结果表明,本文提出的模糊半主动控制具有较高的效率,可以减小需要的控制力,充分使用了MR阻尼器的输入电压可以调节的功能,使MR阻尼器的功能得到了更好的发挥.     

安装复合MR阻尼器的结构振动台试验研究

对不同控制策略下安装有复合MR(磁流变)阻尼器的模型结构进行了振动台试验研究.在El Centro地震动激励下,基于线性二次高斯(LQG)和广义预测(GP)两种控制算法,针对半主动控制系统、MR阻尼器以恒定电流(-0.5A(Passive-on 1)、0A(Passive-off)、2A(Passive-on 2)的控制系统,以及由半主动控制方式和基础隔震组合而成的混合控制系统,在WINCON/SIMULINK实时控制软件平台下对一个1:4的三层钢框架模型进行了地震模拟振动台试验.试验结果表明:基于复合MR阻尼器的控制系统是有效的,无论是被动控制、半主动控制还是混合控制,都显著降低了模型结构各层的加速度、位移响应;复合MR阻尼器在不通入电流时具有一定的被动控制效果;采用考虑时滞自补偿的广义预测控制效果要好于LQG控制,并且这两种控制策略的都能以较被动控制小的控制力达到较好的控制效果.     

大跨铁路钢桁连续梁桥减隔震方案比较研究

为研究适用于大跨铁路钢桁连续梁桥的减隔震方案及合理优化参数,以一座全长504 m的三跨铁路钢桁连续梁特大桥为工程背景,使用非线性结构分析软件SAP2000建立有限元模型,采用快速非线性分析方法分析对比摩擦摆、阻尼器、速度锁定器等减隔震方案在各种装置参数下的减震效率。研究表明:由于大跨铁路钢桁连续梁桥墩身自振导致的地震力较大,摩擦摆方案内力减震效率一般,同时墩底内力对滑动面半径变化并不敏感,在选取滑动半径时应更多地考虑行车平顺性和梁端位移值的限制。速度锁定器会极大地增加此类桥梁地震输入能量,不适用于此类桥型。阻尼器方案对活动墩内力减震效果明显,但不能有效降低固定墩内力。摩擦摆支座附加阻尼器组合减震方案能有效控制此类桥梁的内力和位移响应。研究结论可为大跨度钢桁连续梁桥减隔震设计提供参考。     

铅阻尼器在自锚式悬索桥横向减震设计中的应用研究

某自锚式钢桁架悬索桥结构主跨408m,采用双层桥面,2根主缆为空间线形布置。本文根据自锚式悬索桥独特的动力特性,提出在悬索桥主梁与过渡墩、辅助墩之间沿横向设置铅挤压阻尼器的消能减震设计方案,以控制悬索桥的横向地震反应。根据风、行车和地震荷载等各种工况可能引起的支座剪力值,提出了铅挤压阻尼器临界滑移荷载值的确定方法。研究表明,同时采用铅挤压阻尼器和粘滞阻尼器的消能减震技术,可以有效地减小悬索桥的横向地震反应,可供工程实践参考。