Constraints of U-Pb zircon dating on the evolution of the Nan-Uttaradit suture zone in northern Thailand

Nan-Uttaradit suture zone in northern Thailand is a narrow N-S trending and discontinuous ophiolite belt along the Nan River (Barr and MacDonald, 1987). It was interpreted as the Paleo-Tethys oceanic remnants that separate Shan-Thai (Sibumasu) terrane and Indo-china terrane (Bunopas, 1981; Hada, 1999), and rein-terpreted as the boundary of Sukhothai (or Simao) terrane and the Indochina terrane that representing a segment of the back-arc basin (Barr and MacDonald, 1991; Ueno and Hisada, 2001; Metcalfe, 2006; Ferrari et al., 2008; Sone and Metcalfe, 2008). This zone is dominated by Carboniferous to Permian Pha Som Metamorphic Complex (Hess and Koch, 1975). The Pha Som Metamorphic Complex consists of several tectonostratigraphic slices of volcanic rocks, schists, meta-greywacke, serpentinite and bedded chert. And it is in fault contact with Pak Pat volcanic rocks. Both of Pha Som Metamorphic Complex and Pak Pat volcanic rocks are covered by the Upper Triassic and the Juras-sic red sandstones with angular unconformity. Previ-ous studies mainly focused on the amalgamation epi-sodes of the Sukhothai terrane and Indochina terrane. The Late Carboniferous to Early Permian age of the opening of the basin was proposed by some authors (Singharajwarapan and Berry, 2000; Metcalfe, 2006; Ferrari et al., 2008) on the basis of the regional strati-graphy, different dating of cherts, and schists from the Pha Som Metamorphic Complex.     

Tectonic evolution of the Malay Peninsula

The Malay Peninsula is characterised by three north–south belts, the Western, Central, and Eastern belts based on distinct differences in stratigraphy, structure, magmatism, geophysical signatures and geological evolution. The Western Belt forms part of the Sibumasu Terrane, derived from the NW Australian Gondwana margin in the late Early Permian. The Central and Eastern Belts represent the Sukhothai Arc constructed in the Late Carboniferous–Early Permian on the margin of the Indochina Block (derived from the Gondwana margin in the Early Devonian). This arc was then separated from Indochina by back-arc spreading in the Permian. The Bentong-Raub suture zone forms the boundary between the Sibumasu Terrane (Western Belt) and Sukhothai Arc (Central and Eastern Belts) and preserves remnants of the Devonian–Permian main Palaeo-Tethys ocean basin destroyed by subduction beneath the Indochina Block/Sukhothai Arc, which produced the Permian–Triassic andesitic volcanism and I-Type granitoids observed in the Central and Eastern Belts of the Malay Peninsula. The collision between Sibumasu and the Sukhothai Arc began in Early Triassic times and was completed by the Late Triassic. Triassic cherts, turbidites and conglomerates of the Semanggol “Formation” were deposited in a fore-deep basin constructed on the leading edge of Sibumasu and the uplifted accretionary complex. Collisional crustal thickening, coupled with slab break off and rising hot asthenosphere produced the Main Range Late Triassic-earliest Jurassic S-Type granitoids that intrude the Western Belt and Bentong-Raub suture zone. The Sukhothai back-arc basin opened in the Early Permian and collapsed and closed in the Middle–Late Triassic. Marine sedimentation ceased in the Late Triassic in the Malay Peninsula due to tectonic and isostatic uplift, and Jurassic–Cretaceous continental red beds form a cover sequence. A significant Late Cretaceous tectono-thermal event affected the Peninsula with major faulting, granitoid intrusion and re-setting of palaeomagnetic signatures.     

泰国难府-程逸缝合带中灰岩块的 虫筳 类生物地层学

The study area, Nan Province, northern Thailand is geotectonically situated within the Nan-Uttaradit Suture, the once back-arc basin between the Sukhothai Zone and Indochina Block. Permian Fusulinacean fauna from limestone blocks within the suture has been investigated and the Nan area has been mapped in detail. These may provide the useful information for understanding the faunal assemblage and overall ge-ometry of stratigraphic successions in the basin. The strata were intensely folded and thrust. Scattered Per-mian limestones found in Nan area are blocks within shale interbedded with tuffaceous rock. The contact between this unit and the adjacent units, the strongly foliated shale and tuffaceous sedimentary strata that are mildly metamorphosed and giving phyllitic tex-tures, has been interpreted as a west-dipping normal fault, namely the Pha Sing Fault. This fault runs par-allel to the Highway no.1080 (Nan-Tha Wang Pha). Middle and early Late Permian fusulinacean fauna found in the Nan area contains Neoschwagerina, Pseudodoliolina, Colania, Lepidolina, and Colaniella. Additionally, late Early Permian fusulinacean and Middle Triassic radiolarian fauna have been reported in this area (e.g., Fontaine, 2002; Saesaengseerung et al. 2008). These paleontological data show the existence of Nan Back-arc Basin during late Early Permian (Artin-skian) to Middle Triassic. Moreover, the similarity of fusulinacean assemblage yielding Permian limestone blocks of the Nan Back-arc Basin and the ones of the Indochina Block has been interpreted that the Permian limestone blocks in the Nan Back-arc Basin were part of the continental shelf within the Indochina Block.     

Geochronology and petrogeochemistry of Late Permian volcanic rocks in the B.Xiengnou area,Northwestern Laos: Petrogenesis and tectonic significance

The Nan Suture and Sukhothai Arc Terrane are products of the eastward subduction of the Paleotethyan Ocean during the Late Carboniferous to Triassic. However, their footprints in northwestern Laos are poorly constrained. New geochronological and geochemical data presented in this study demonstrate a Late Permian origin for the andesitic rocks in the B.Xiengnou area rather than Late Triassic. The breccia-bearing andesitic tuff in the B.On ultramafic complex yield a zircon U-Pb age of 260 ± 1.4 Ma, geochemically displaying a MORB-like signature. The andesitic tuff in the B.Kiophoulan-B.Houayhak belt gave the U-Pb age of 254 ± 1.3 Ma, with arc-like geochemical affinity. By combining geochronological and geochemical data from the Nan Suture and Sukhothai Arc Terrane, the authors suggest that the andesitic rocks in the B.On ultramafic complex formed in a back-arc basin background, which connected the Jinghong and Nan back-arc basin during the Permian; while the andesitic tuff in the B.Kiophoulan-B.Houayhak belt erupted in the Sukhothai continental arc setting.©2021 China Geology Editorial Office.     

Metallogeny and tectonic development of the Tasman Fold Belt System in Queensland

The northern part of the Tasman Fold Belt System in Queensland comprises three segments, the Thomson, Hodgkinson- Broken River, and New England Fold Belts. The evolution of each fold belt can be traced through pre-cratonic (orogenic), transitional, and cratonic stages. The different timing of these stages within each fold belt indicates differing tectonic histories, although connecting links can be recognised between them from Late Devonian time onward. In general, orogenesis became younger from west to east towards the present continental margin. The most recent folding, confined to the New England Fold Belt, was of Early to mid-Cretaceous age. It is considered that this eastward migration of orogenic activity may reflect progressive continental accretion, although the total amount of accretion since the inception of the Tasman Fold Belt System in Cambrian time is uncertain.The Thomson Fold Belt is largely concealed beneath late Palaeozoic and Mesozoic intracratonic basin sediments. In addition, the age of the more highly deformed and metamorphosed rocks exposed in the northeast is unknown, being either Precambrian or early Palaeozoic. Therefore, the tectonic evolution of this fold belt must remain very speculative. In its early stages (Precambrian or early Palaeozoic), the Thomson Fold Belt was probably a rifted continental margin adjacent to the Early to Middle Proterozoic craton to the west and north. The presence of calc-alkaline volcanics of Late Cambrian Early Ordovician and Early-Middle Devonian age suggests that the fold belt evolved to a convergent Pacific-type continental margin. The tectonic setting of the pre-cratonic (orogenic) stage of the Hodgkinson—Broken River Fold Belt is also uncertain. Most of this fold belt consists of strongly deformed, flysch-type sediments of Silurian-Devonian age. Forearc, back-arc and rifted margin settings have all been proposed for these deposits. The transitional stage of the Hodgkinson—Broken River Fold Belt was characterised by eruption of extensive silicic continental volcanics, mainly ignimbrites, and intrusion of comagmatic granitoids in Late Carboniferous Early Permian time. An Andean-type continental margin model, with calc-alkaline volcanics erupted above a west-dipping subduction zone, has been suggested for this period. The tectonic history of the New England Fold Belt is believed to be relatively well understood. It was the site of extensive and repeated eruption of calc-alkaline volcanics from Late Silurian to Early Cretaceous time. The oldest rocks may have formed in a volcanic island arc. From the Late Devonian, the fold belt was a convergent continental margin above a west-dipping subduction zone. For Late Devonian- Early Carboniferous time, parallel belts representing continental margin volcanic arc, forearc basin, and subduction complex can be recognised.A great variety of mineral deposits, ranging in age from Late Cambrian-Early Ordovician and possibly even Precambrian to Early Cretaceous, is present in the exposed rocks of the Tasman Fold Belt System in Queensland. Volcanogenic massive sulphides and slate belt-type gold-bearing quartz veins are the most important deposits formed in the pre-cratonic (orogenic) stage of all three fold belts. The voicanogenic massive sulphides include classic Kuroko-type orebodies associated with silicic volcanics, such as those at Thalanga (Late Cambrian-Early Ordovician. Thomson Fold Belt) and at Mount Chalmers (Early Permian New England Fold Belt), and Kieslager or Besshi-type deposits related to submarine mafic volcanics, such as Peak Downs (Precambrian or early Palaeozoic, Thomson Fold Belt) and Dianne. OK and Mount Molloy (Silurian—Devonian, Hodgkinson Broken River Fold Belt). The major gold—copper orebody at Mount Morgan (Middle Devonian, New England Fold Belt), is considered to be of volcanic or subvolcanic origin, but is not a typical volcanogenic massive sulphide.The most numerous ore deposits are associated with calc-alkaline volcanics and granitoid intrusives of the transitional tectonic stage of the three fold belts, particularly the Late Carboniferous Early Perman of the Hodgkinson—Broken River Fold Belt and the Late Permian—Middle Triassic of the southeast Queensland part of the New England Fold Belt. In general, these deposits are small but rich. They include tin, tungsten, molybdenum and bismuth in granites and adjacent metasediments, base metals in contact meta somatic skarns, gold in volcanic breccia pipes, gold-bearing quartz veins within granitoid intrusives and in volcanic contact rocks, and low-grade disseminated porphyry-type copper and molybdenum deposits. The porphyry-type deposits occur in distinct belts related to intrusives of different ages: Devonian (Thomson Fold Belt), Late Carboniferous—Early Permian (Hodgkinson—Broken River Fold Belt). Late Permian Middle Triassic (southeast Queensland part of the New England Fold Belt), and Early Cretaceous (northern New England Fold Belt). All are too low grade to be of economic importance at present.Tertiary deep weathering events were responsible for the formation of lateritic nickel deposits on ultramafics and surficial manganese concentrations from disseminated mineralisation in cherts and jaspers.     

Parallel Tethyan sutures in mainland Southeast Asia: New insights for Palaeo-Tethys closure and implications for the Indosinian orogeny

Two contrasting parallel tectonic sutures can be recognised through the Yunnan–Thailand region of mainland Southeast Asia; they are sutures of the Devonian–Triassic Palaeo-Tethys Ocean and a Permian back-arc basin. The Changning–Menglian and Inthanon suture zones are regarded as the Palaeo-Tethys Suture Zone. The Jinghong–Nan–Sra Kaeo suture is regarded as a closed back-arc basin. The Sukhothai Zone is no longer treated as a part of the Sibumasu Terrane, but is defined as the core part of the Permian island-arc system developed on the western margin of the Indochina Terrane. Two tectonic events are interpreted from the parallel sutures; a Late Permian collapse of the back-arc basin and a mid-Triassic collision of Sibumasu to the Sukhothai Arc of Indochina (= closure of the Palaeo-Tethys). The Early–early Middle Triassic thermotectonism of Vietnam as linked to the Indosinian orogeny by some authors is incompatible with the suggested timing of Sibumasu collision, but instead it is temporally closer to the back-arc compression of western Indochina.     

Metallogeny and tectonic development of the Tasman Fold Belt System in New South Wales

The northwestern corner of New South Wales consists of the paratectonic Late Proterozoic to Early Cambrian Adelaide Fold Belt and older rocks, which represent basement inliers in this fold belt. The rest of the state is built by the composite Late Proterozoic to Triassic Tasman Fold Belt System or Tasmanides.In New South Wales the Tasman Fold Belt System includes three fold belts: (1) the Late Proterozoic to Early Palaeozoic Kanmantoo Fold Belt; (2) the Early to Middle Palaeozoic Lachlan Fold Belt; and (3) the Early Palaeozoic to Triassic New England Fold Belt. The Late Palaeozoic to Triassic Sydney—Bowen Basin represents the foredeep of the New England Fold Belt.The Tasmanides developed in an active plate margin setting through the interaction of East Gondwanaland with the Ur-(Precambrian) and Palaeo-Pacific plates. The Tasmanides are characterized by a polyphase terrane accretion history: during the Late Proterozoic to Triassic the Tasmanides experienced three major episodes of terrane dispersal (Late Proterozoic—Cambrian, Silurian—Devonian, and Late Carboniferous—Permian) and six terrane accretionary events (Cambrian—Ordovician, Late Ordovician—Early Silurian, Middle Devonian, Carboniferous, Middle-Late Permian, and Triassic). The individual fold belts resulted from one or more accretionary events.The Kanmantoo Fold Belt has a very restricted range of mineralization and is characterized by stratabound copper deposits, whereas the Lachlan and New England Fold Belts have a great variety of metallogenic environments associated with both accretionary and dispersive tectonic episodes.The earliest deposits in the Lachlan Fold Belt are stratabound Cu and Mn deposits of Cambro-Ordovician age. In the Ordovician Cu deposits were formed in a volcanic are. In the Silurian porphyry Cu---Au deposits were formed during the late stages of development of the same volcanic are. Post-accretionary porphyry Cu---Au deposits were emplaced in the Early Devonian on the sites of the accreted volcanic arc. In the Middle to Late Silurian and Early Devonian a large number of base metal deposits originated as a result of rifting and felsic volcanism. In the Silurian and Early Devonian numerous Sn---W, Mo and base metal—Au granitoid related deposits were formed. A younger group of Mo---W and Sn deposits resulted from Early—Middle Carboniferous granitic plutonism in the eastern part of the Lachlan Fold Belt. In the Middle Devonian epithermal Au was associated with rifting and bimodal volcanism in the extreme eastern part of the Lachlan Fold Belt.In the New England Fold Belt pre-accretionary deposits comprise stratabound Cu and Mn deposits (pre-Early Devonian): stratabound Cu and Mn and ?exhalite Au deposits (Late Devonian to Early Carboniferous); and stratabound Cu, exhalite Au, and quartz—magnetite (?Late Carboniferous). S-type magmatism in the Late Carboniferous—Early Permian was responsible for vein Sn and possibly Au---As---Ag---Sb deposits. Volcanogenic base metals, when compared with the Lachlan Fold Belt, are only poorly represented, and were formed in the Early Permian. The metallogenesis of the New England Fold Belt is dominated by granitoid-related mineralization of Middle Permian to Triassic age, including Sn---W, Mo---W, and Au---Ag---As Sb deposits. Also in the Middle Permian epithermal Au---Ag mineralization was developed. During the above period of post-orogenic magmatism sizeable metahydrothermal Sb---Au(---W) and Au deposits were emplaced in major fracture and shear zones in central and eastern New England. The occurrence of antimony provides an additional distinguishing factor between the New England and Lachlan Fold Belts. In the New England Fold Belt antimony deposits are abundant whereas they are rare in the Lachlan Fold Belt. This may suggest fundamental crustal differences.     

难府缝合带：航空地球物理结果

Nan suture in northern Thailand, representing a complex zone with complex geology and structures, has been selected for airborne geophysical investiga-tions. The suture has been widely accepted as an early Triassic collision zone between Shan-Thai and Indo-china microcontinental blocks. Our field data suggest the occurrence of a mélange zone in response to com-pression tectonics. Moreover, previous petrochemical and field investigations suggest that the Nan suture may have been formed as a result of a subduction zone.     

Gondwana dispersion and Asian accretion: Tectonic and palaeogeographic evolution of eastern Tethys

Present-day Asia comprises a heterogeneous collage of continental blocks, derived from the Indian–west Australian margin of eastern Gondwana, and subduction related volcanic arcs assembled by the closure of multiple Tethyan and back-arc ocean basins now represented by suture zones containing ophiolites, accretionary complexes and remnants of ocean island arcs. The Phanerozoic evolution of the region is the result of more than 400 million years of continental dispersion from Gondwana and plate tectonic convergence, collision and accretion. This involved successive dispersion of continental blocks, the northwards translation of these, and their amalgamation and accretion to form present-day Asia. Separation and northwards migration of the various continental terranes/blocks from Gondwana occurred in three phases linked with the successive opening and closure of three intervening Tethyan oceans, the Palaeo-Tethys (Devonian–Triassic), Meso-Tethys (late Early Permian–Late Cretaceous) and Ceno-Tethys (Late Triassic–Late Cretaceous). The first group of continental blocks dispersed from Gondwana in the Devonian, opening the Palaeo-Tethys behind them, and included the North China, Tarim, South China and Indochina blocks (including West Sumatra and West Burma). Remnants of the main Palaeo-Tethys ocean are now preserved within the Longmu Co-Shuanghu, Changning–Menglian, Chiang Mai/Inthanon and Bentong–Raub Suture Zones. During northwards subduction of the Palaeo-Tethys, the Sukhothai Arc was constructed on the margin of South China–Indochina and separated from those terranes by a short-lived back-arc basin now represented by the Jinghong, Nan–Uttaradit and Sra Kaeo Sutures. Concurrently, a second continental sliver or collage of blocks (Cimmerian continent) rifted and separated from northern Gondwana and the Meso-Tethys opened in the late Early Permian between these separating blocks and Gondwana. The eastern Cimmerian continent, including the South Qiangtang block and Sibumasu Terrane (including the Baoshan and Tengchong blocks of Yunnan) collided with the Sukhothai Arc and South China/Indochina in the Triassic, closing the Palaeo-Tethys. A third collage of continental blocks, including the Lhasa block, South West Borneo and East Java–West Sulawesi (now identified as the missing “Banda” and “Argoland” blocks) separated from NW Australia in the Late Triassic–Late Jurassic by opening of the Ceno-Tethys and accreted to SE Sundaland by subduction of the Meso-Tethys in the Cretaceous.     

泰国北部难河构造带二叠纪放射虫、硅质岩和玄武岩

在泰国北部难河构造带Pha Som变质杂岩中发现保存很好的放射虫硅质岩、玄武岩地层层序.层状硅质岩含放射虫化石Follicucullus porrectus, 地质时代为中二叠世晚期至晚二叠世早期.其硅质岩SiO₂含量均在92.5%以上, Al/ (Al+Fe+Mn) 平均比值为0.51, Ce/Ce*比值为1.14, 为大陆边缘型硅质岩.玄武岩具有富集大离子亲石元素与高场强元素以及轻稀土富集等洋岛玄武岩的特点.说明难河构造带中-晚二叠世之交存在洋岛型火山岩和靠近大陆边缘的深海盆地硅质岩, 代表了小洋盆的沉积组合.该构造带闭合时间应在晚二叠世与晚三叠世之间.      

Evolution of a reworked orogenic zone: The boundary between the delamerian and lachlan fold belts,southeastern Australia *

⁴⁰Ar/³⁹Ar age data from the boundary between the Delamerian and Lachlan Fold Belts identify the Moornambool Metamorphic Complex as a Cambrian metamorphic belt in the western Stawell Zone of the Palaeozoic Tasmanide System of southeastern Australia. A reworked orogenic zone exists between the Lachlan and Delamerian Fold Belts that contains the eastern section of the Cambrian Delamerian Fold Belt and the western limit of orogenesis associated with the formation of an Ordovician to Silurian accretionary wedge (Lachlan Fold Belt). Delamerian thrusting is craton-verging and occurred at the same time as the final consolidation of Gondwana. ⁴⁰Ar/³⁹Ar age data indicate rapid cooling of the Moornambool Metamorphic Complex at about 500 Ma at a rate of 20 – 30°C per million years, temporally associated with calc-alkaline volcanism followed by clastic sedimentation. Extension in the overriding plate of a subduction zone is interpreted to have exhumed the metamorphic rocks within the Moornambool Metamorphic Complex. The Delamerian system varies from a high geothermal gradient with syntectonic plutonism in the west to lower geothermal gradients in the east (no syntectonic plutonism). This metamorphic zonation is consistent with a west-dipping subduction zone. Contrary to some previous models involving a reversal in subduction polarity, the Ross and Delamerian systems of Antarctica and Australia are inferred to reflect deformation processes associated with a Cambrian subduction zone that dipped towards the Gondwana supercontinent. Western Lachlan Fold Belt orogenesis occurred about 40 million years after the Delamerian Orogeny and deformed older, colder, and denser oceanic crust, with metamorphism indicative of a low geothermal gradient. This orogenesis closed a marginal ocean basin by west-directed underthrusting of oceanic crust that produced an accretionary wedge with west-dipping faults that verge away from the major craton. The western Lachlan Fold Belt was not associated with arc-related volcanism and plutonism occurred 40 – 60 million years after initial deformation. The revised orogenic boundaries have implications for the location of world-class 440 Ma orogenic gold deposits. The structural complexity of the 440 Ma Stawell gold deposit reflects its location in a reworked part of the Cambrian Delamerian Fold Belt, while the structurally simpler 440 Ma Bendigo deposit is hosted by younger Ordovician turbidites solely deformed by Lachlan orogenesis.     

北羌塘地区北缘上三叠统若拉岗日岩群地层特征及沉积环境

北羌塘地区北缘上三叠统若拉岗日岩群分布于北羌塘陆块与拉竹龙-金沙江缝合带之间的若拉岗日冲断带,以砂泥质复理石、中基性-超基性火山岩及大理岩组合为特征,夹晚二叠世灰岩岩片及蛇绿岩残块。岩石低-中级变质,构造变形强烈,顶底均被断层切割断失,为总体无序、局部有序的构造-地层体。若拉岗日岩群中基性火山岩具有洋岛和岛弧型成因,它是金沙江洋盆在晚三叠世向南俯冲,而在其南缘形成的岛弧带沉积。在若拉岗日岩群采获大量上三叠统常见的孢粉、腕足、双壳类生物化石,其玄武岩年龄值为201±4Ma(Ar-Ar法),时代属诺利期。     

U–Pb ages of detrital zircons within the Inthanon Zone of the Paleo-Tethyan subduction zone,northern Thailand: New constraints on accretionary age and arc activity

U–Pb dating of detrital zircons was performed on mélange-hosted lithic and basaltic sandstones from the Inthanon Zone in northern Thailand to determine the timing of accretion and arc activity associated with Paleo-Tethys subduction. The detrital zircons have peak ages at 3400–3200, 2600–2400, 1000–700, 600–400, and 300–250 Ma, similar to the peaks ages of detrital zircons associated with other circum-Paleo-Tethys subduction zones. We identified two types of sandstone in the study area based on the youngest detrital zircon ages: Type 1 sandstones have Late Carboniferous youngest zircon U–Pb ages of 308 ± 14 and 300 ± 16 Ma, older than associated radiolarian chert blocks within the same outcrop. In contrast, Type 2 sandstones have youngest zircon U–Pb ages of 238 ± 10 and 236 ± 15 Ma, suggesting a Middle Triassic maximum depositional age. The youngest detrital zircons in Type 1 sandstones were derived from a Late Carboniferous–Early Permian ‘missing’ arc, suggesting that the Sukhothai Arc was active during sedimentation. The data presented within this study provide information on the development of the Sukhothai Arc, and further suggest that subduction of the Paleo-Tethyan oceanic plate beneath the Indochina Block had already commenced by the Late Carboniferous. Significant Middle Triassic arc magmatism, following the Late Carboniferous–Early Permian arc activity, is inferred from the presence of conspicuous detrital zircon U–Pb age peaks in Type 2 sandstones and the igneous rock record of the Sukhothai Arc. In contrast, only minimal arc activity occurred during the Middle Permian–earliest Triassic. Type 1 sandstones were deposited between the Late Permian and the earliest Triassic, after the deposition of associated Middle–Late Permian cherts that occur in the same mélanges and during a hiatus in Sukhothai Arc magmatism. In contrast, Type 2 sandstones were deposited during the Middle Triassic, coincident with the timing of maximum magmatism in the Sukhothai Arc, as evidenced by the presence of abundant Middle Triassic detrital zircons. These two types of sandstone were probably derived from discrete accretionary units in an original accretionary prism that was located along the western margin of the Sukhothai Arc.     

Magmatic changes during the stabilisation of a cordilleran fold belt: the Late Carboniferous–Triassic igneous history of eastern New South Wales, Australia

In a 60 Ma interval between the Late Carboniferous and the Late Permian, the magmatic arc associated with the cordilleran-type New England Fold Belt in northeast New South Wales shifted eastward and changed in trend from north–northwest to north. The eastern margin of the earlier (Devonian–Late Carboniferous) arc is marked by a sequence of calcalkaline lava flows, tuffs and coarse volcaniclastic sedimentary rocks preserved in the west of the Fold Belt. The younger arc (Late Permian–Triassic) is marked by I-type calcalkaline granitoids and comagmatic volcanic rocks emplaced mostly in the earlier forearc, but extending into the southern Sydney Basin, in the former backarc region. The growth of the younger arc was accompanied by widespread compressional deformation that stabilised the New England Fold Belt. During the transitional interval, two suites of S-type granitoids were emplaced, the Hillgrove Suite at about 305 Ma during an episode of compressive deformation and regional metamorphism, and the Bundarra Suite at about 280 Ma, during the later stages of an extensional episode. Isotopic and REE data indicate that both suites resulted from the partial melting of young silicic sedimentary rocks, probably part of the Carboniferous accretionary subduction complex, with heat supplied by the rise of asthenospheric material. Both mafic and silicic volcanic activity were widespread within and behind the Fold Belt from the onset of rifting (ca. 295 Ma) until the reestablishment of the arc. These volcanic rocks range in composition from MORB-like to calcalkaline and alkaline. The termination of the earlier arc, and the subsequent widespread and diverse igneous activity are considered to have resulted from the shallow breakoff of the downgoing plate, which allowed the rise of asthenosphere through a widening lithospheric gap. In this setting, division of the igneous rocks into pre-, syn-, and post-collisional groups is of limited value.     

Isotopic constraints on crustal architecture and Permo‐Triassic tectonics in New Guinea: Possible links with eastern Australia

New U–Pb zircon ages and Sr–Nd isotopic data for Triassic igneous and metamorphic rocks from northern New Guinea help constrain models of the evolution of Australia's northern and eastern margin. These data provide further evidence for an Early to Late Triassic volcanic arc in northern New Guinea, interpreted to have been part of a continuous magmatic belt along the Gondwana margin, through South America, Antarctica, New Zealand, the New England Fold Belt, New Guinea and into southeast Asia. The Early to Late Triassic volcanic arc in northern New Guinea intrudes high‐grade metamorphic rocks probably resulting from Late Permian to Early Triassic (ca 260–240 Ma) orogenesis, as recorded in the New England Fold Belt. Late Triassic magmatism in New Guinea (ca 220 Ma) is related to coeval extension and rifting as a precursor to Jurassic breakup of the Gondwana margin. In general, mantle‐like Sr–Nd isotopic compositions of mafic Palaeozoic to Tertiary granitoids appear to rule out the presence of a North Australian‐type Proterozoic basement under the New Guinea Mobile Belt. Parts of northern New Guinea may have a continental or transitional basement whereas adjacent areas are underlain by oceanic crust. It is proposed that the post‐breakup margin comprised promontories of extended Proterozoic‐Palaeozoic continental crust separated by embayments of oceanic crust, analogous to Australia's North West Shelf. Inferred movement to the south of an accretionary prism through the Triassic is consistent with subduction to the south‐southwest beneath northeast Australia generating arc‐related magmatism in New Guinea and the New England Fold Belt.     

Evolution of the Loei Belt in northeastern Thailand and northwestern Laos

On the tectonic evolution of the mainland South-east Asia, researchers pay more attention to the Chiang Mae and Nan belts. Investigation on the Loei Belt is usually ignored. Therefore, there are different opinions about its naming and evolution: Loei Fold-belt located at the western margin of the Indochina Block during the Late Paleozoic and Triassic (Bunopas, 1981; Man-tajit, 1999), Petchabun Fold-belt between the Khao Khwang and Pha Nok Khao carbonate plateforms dur-ing the Carboniferous and Permian (Helmcke, 1983, 1986; Altermann, 1989, 1991), Loei Suture Zone be-tween the Nakhon Thai and Indochina blocks during the Late Paleozoic and early Mesozoic (Charusiri et al., 1997, 2002; Chutakositkanon et al., 1997, 1999)     

Sedimentary response to the paleogeographic and tectonic evolution of the southern North China Craton during the late Paleozoic and Mesozoic

With the aim of constraining the influence of the surrounding plates on the Late Paleozoic–Mesozoic paleogeographic and tectonic evolution of the southern North China Craton (NCC), we undertook new U–Pb and Hf isotope data for detrital zircons obtained from ten samples of upper Paleozoic to Mesozoic sediments in the Luoyang Basin and Dengfeng area. Samples of upper Paleozoic to Mesozoic strata were obtained from the Taiyuan, Xiashihezi, Shangshihezi, Shiqianfeng, Ermaying, Shangyoufangzhuang, Upper Jurassic unnamed, and Lower Cretaceous unnamed formations (from oldest to youngest). On the basis of the youngest zircon ages, combined with the age-diagnostic fossils, and volcanic interlayer, we propose that the Taiyuan Formation (youngest zircon age of 439 Ma) formed during the Late Carboniferous and Early Permian, the Xiashihezi Formation (276 Ma) during the Early Permian, the Shangshihezi (376 Ma) and Shiqianfeng (279 Ma) formations during the Middle–Late Permian, the Ermaying Group (232 Ma) and Shangyoufangzhuang Formation (230 and 210 Ma) during the Late Triassic, the Jurassic unnamed formation (154 Ma) during the Late Jurassic, and the Cretaceous unnamed formation (158 Ma) during the Early Cretaceous. These results, together with previously published data, indicate that: (1) Upper Carboniferous–Lower Permian sandstones were sourced from the Northern Qinling Orogen (NQO); (2) Lower Permian sandstones were formed mainly from material derived from the Yinshan–Yanshan Orogenic Belt (YYOB) on the northern margin of the NCC with only minor material from the NQO; (3) Middle–Upper Permian sandstones were derived primarily from the NQO, with only a small contribution from the YYOB; (4) Upper Triassic sandstones were sourced mainly from the YYOB and contain only minor amounts of material from the NQO; (5) Upper Jurassic sandstones were derived from material sourced from the NQO; and (6) Lower Cretaceous conglomerate was formed mainly from recycled earlier detritus.The provenance shift in the Upper Carboniferous–Mesozoic sediments within the study area indicates that the YYOB was strongly uplifted twice, first in relation to subduction of the Paleo-Asian Ocean Plate beneath the northern margin of the NCC during the Early Permian, and subsequently in relation to collision between the southern Mongolian Plate and the northern margin of the NCC during the Late Triassic. The three episodes of tectonic uplift of the NQO were probably related to collision between the North and South Qinling terranes, northward subduction of the Mianlue Ocean Plate, and collision between the Yangtze Craton and the southern margin of the NCC during the Late Carboniferous–Early Permian, Middle–Late Permian, and Late Jurassic, respectively. The southern margin of the central NCC was rapidly uplifted and eroded during the Early Cretaceous.     

U–Pb ages and Lu–Hf isotopes of detrital zircons from the southern Qinling Orogen: Implications for Precambrian to Phanerozoic tectonics in central China

The Qinling Orogen, central China, was constructed during the Mesozoic collision between the North China and Yangtze continental plates. The orogen includes four tectonic units, from north to south, the Huaxiong Block (reactivated southern margin of the North China Craton), North Qinling Accretion Belt, South Qinling Fold Belt (or block) and Songpan Fold Belt, evolved from the northernmost Paleo-Tethys Ocean separating the Gondwana and Laurentia supercontinents. Here we employ detrital zircons from the Early Cretaceous alluvial sediments within the Qinling Orogen to trace the tectonic evolution of the orogen. The U–Pb ages of the detrital zircon grains from the Early Cretaceous Donghe Group sediments in the South Qinling Fold Belt cluster around 2600–2300 Ma, 2050–1800 Ma, 1200–700 Ma, 650–400 Ma and 350–200 Ma, corresponding to the global Kenorland, Columbia, Rodinia, Gondwana and Pangaea supercontinent events, respectively. The distributions of ages and εHf(t) values of zircon grains show that the Donghe Group sediments have a complex source comprising components mainly recycled from the North Qinling Accretion Belt and the North China Craton, suggesting that the South Qinling Fold Belt was a part of the united Qinling–North China continental plate, rather than an isolated microcontinent, during the Devonian–Triassic. The youngest age peak of 350–200 Ma reflects the magmatic event related to subduction and termination of the Mian-Lue oceanic plate, followed by the collision between the Yangtze Craton and the united Qinling–North China continent that came into existence at the Triassic–Jurassic transition. The interval of 208–145 Ma between the sedimentation of the Early Cretaceous Donghe Group and the youngest age of detrital zircons was coeval with the post-subduction collision between the Yangtze and the North China continental plates in Jurassic.     

Plate tectonic model of the South Urals development

The Uralian Fold Belt originated due to the East European-Kazakhstan continental collision in the Late Paleozoic-Early Triassic. The Uralian paleo-ocean existed from the Ordovician to Early Carboniferous. It evolved along the Western Pacific pattern with island arcs and subduction zones moving oceanwards from the East European margin and leaving newly opened back-arc basins behind from the Silurian to the Middle Devonian. A fossil spreading pattern similar to present one can be reconstructed for the Mugodjarian back-arc basin with the spreading rate of 5 cm/yr and depth of basaltic eruption of 3000 m. Since the Devonian, the closure of the Uralian paleo-ocean has begun. A subduction zone flipped over under the Kazakhstan continent, and remnants of an oceanic floor were completely consumed before the Late Carboniferous. After that the continental collision began which lasted nearly 90 Ma. As a result, the distinct linear shape and nappe structure of the Urals were formed.     

滇西昌宁─孟连带南部地层地质问题

滇西孟连以南，整合于南段组浊积岩之上的拉巴群硅质岩含晚二叠世早期放射虫化石，南段组时代不仅限于石炭纪，可能延入二叠纪。二者为晚古生代思茅地块的外陆坡沉积。其西面的南基河杂岩（新名）由层序混乱的晚古生代硅质岩、泥岩和少量砂岩、玄武岩构成。放射虫化石证据表明，硅质岩时代不仅限于晚泥盆世－早二叠世，还延入晚二叠世，而有的砂岩时代为早石炭世，它们是经过强烈构造变动的古特提斯洋的沉积记录。昌宁－孟连带向南可能延至泰国北部的清迈带，而非东北部的难河带。