Tectono-metamorphic history of the ophiolitic Lento unit (northern Corsica): evidences for the complexity of accretion-exhumation processes in a fossil subduction system

The Alpine Corsica (Corsica Island, France) is characterized by a stack of continent- and ocean-derived tectonic units, known as Schistes Lustrés complex. This complex is affected by deformation and metamorphic imprint achieved during Late Cretaceous – Early Tertiary subduction- related processes connected with the closure of the Ligure-Piemontese oceanic basin and subsequent continental collision. In the Schistes Lustrés complex, the Lento oceanic unit is characterized by four deformation phases, from D1 to D4 phase. The D1 phase, characterized by blueschist metamorphism, is regarded as related to coherent underplating in a subduction zone at a depth of about 25-30 km. The subsequent deformation phases can be referred to exhumation history, as suggested by the continuous decrease of metamorphic conditions. The transition from accretion to exhumation is represented by the D2 phase, achieved during the development of a duplex structure of accreted units. The D3 phase is in turn achieved by a further horizontal shortening, whereas the D4 phase is developed during an extensional event representing the final exhumation of the Lento unit.

On the whole, the data collected for the Lento unit suggest an history that include an accretion by coherent underplating followed by exhumation, more complex than previous described.     

Structural and metamorphic evolution of the phengite‐bearing schists of the northern Adula Nappe (Central Alps,Switzerland)

Phengite‐bearing schists of the northern Adula Nappe experienced a polymetamorphic and polycyclic evolution that was associated with five deformation episodes. Evidence of a pre‐Alpine metamorphic event is preserved within garnet cores of some amphibole‐bearing schists. The D1 and D2 deformation episodes are recorded by S1 and S2 foliations preserved only within metre‐scale domains of low‐D3 strain. S1 is a relict foliation. Blueschist‐facies conditions at 565 ± 10°C and 11.5 ± 1.5 kbar were attained during D2 and were associated with the development of isoclinal folding and an S2 foliation. The D3 episode took place at 665 ± 50°C and 11.5 ± 2.1 kbar and was responsible for the development of a transpositive S3 foliation. The D4 episode took place at T < 550 ± 10°C and was associated with the development of a discrete S4 foliation and S‐C structures. The D5 episode is recorded by sub‐vertical metre‐scale open folds or centimetre‐scale kinks. The structural and metamorphic evolution described here indicates that the northern and central parts of the Adula Nappe were distinct continental crustal fragments and were brought together under amphibolite‐facies conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

Deformation during exhumation of medium‐ and high‐grade metamorphic rocks in the Variscan chain in northern Sardinia (Italy)

The Anglona and SW Gallura regions represent key places to investigate the tectonic evolution of medium‐ and high‐grade metamorphic rocks cropping out in northern Sardinia (Italy). From south to north we distinguish two different metamorphic complexes recording similar deformation histories but different metamorphic evolution: the Medium Grade Metamorphic Complex (MGMC) and the High Grade Metamorphic Complex (HGMC). After the initial collisional stage (D1 deformation phase), both complexes were affected by three contractional deformational phases (D2, D3 and D4) followed by later extensional tectonics. The D2 deformation phase was the most significant event producing an important deformation partitioning that produced localized shearing and folding domains at the boundary between the two metamorphic complexes. We highlight the presence of two previously undocumented systems of shear belts with different kinematics but analogous orientation in the axial zone of Sardinia. They became active at the boundary between the MGMC and HGMC from the beginning of D2. They formed a transpressive regime responsible for the exhumation of the medium‐ and high‐grade metamorphic rocks, and overall represent a change from orthogonal to orogen‐parallel tectonic transport. Copyright © 2008 John Wiley & Sons, Ltd.     

Structural styles and tectonic evolution of the Kolia-Boboti sedimentary Basin,Kédougou-Kéniéba inlier,eastern Senegal

New structural data obtained on the Birimian terranes of the Kolia-Boboti sedimentary Basin, the eastern part of the Dialé-Daléma Supergroup in the Kédougou-Kéniéba inlier show two major phases of Eburnean compressional deformation: (1) a D1 phase of thrusting tectonics affected the Lower Birimian B1 tourmalinized sediments. This first tectonic phase is characterized by isoclinals overturned to recumbent folds P1 with N040° 20°NE trending axis, associated with axial plane schistosity S₀S₁ which is mainly transposed in the bedding; (2) a D2 phase of compressional (D2a) and transpressional (D2b) tectonics is responsible for the crossfolds P2a-P2b exhibiting curved axes. These P2 folds are associated with the major schistosity S₂, north-south to SW-NE trending, mainly dipping to the south-east. The S₂ schistosity is mostly displayed in the large shear zones corridors where it steeply dips locally toward the north-west. A north-west vergence thrusting phase (D2c) of flats and ramps, associated with reverse folds, represents the last Eburnean event. This geometrical feature is characteristic of a “positive flower structure”. These different Eburnean compressional phases are separated by extensional deformation which is characterized by sedimentary deposits and volcanic flows.     

P–T–t–d evolution of orogenic middle crust of the Roc de Frausa Massif (Eastern Pyrenees): a result of horizontal crustal flow and Carboniferous doming?

Structural, petrological and textural studies are combined with phase equilibria modelling of metapelites from different structural levels of the Roc de Frausa Massif in the Eastern Pyrenees. The pre‐Variscan lithological succession is divided into the Upper, Intermediate and Lower series by two orthogneiss sheets and intruded by Variscan igneous rocks. Structural analysis reveals two phases of Variscan deformation. D1 is marked by tight to isoclinal small‐scale folds and an associated flat‐lying foliation (S1) that affects the whole crustal section. D2 structures are characterized by tight upright folds facing to the NW with steep NE–SW axial planes. D2 heterogeneously reworks the D1 fabrics, leading to an almost complete transposition into a sub‐vertical foliation (S2) in the high‐grade metamorphic domain. All structures are affected by late open to tight, steeply inclined south‐verging NW–SE folds (F3) compatible with steep greenschist facies dextral shear zones of probable Alpine age. In the micaschists of the Upper series, andalusite and sillimanite grew during the formation of the S1 foliation indicating heating from 580 to 640 °C associated with an increase in pressure. Subsequent static growth of cordierite points to post‐D1 decompression. In the Intermediate series, a sillimanite–biotite–muscovite‐bearing assemblage that is parallel to the S1 fabric is statically overgrown by cordierite and K‐feldspar. This sequence points to ~1 kbar of post‐D1 decompression at 630–650 °C. The Intermediate series is intruded by a gabbro–diorite stock that has an aureole marked by widespread migmatization. In the aureole, the migmatitic S1 foliation is defined by the assemblage biotite–sillimanite–K‐feldspar–garnet. The microstructural relationships and garnet zoning are compatible with the D1 pressure peak at ~7.5 kbar and ~750 °C. Late‐ to post‐S2 cordierite growth implies that F2 folds and the associated S2 axial planar leucosomes developed during nearly isothermal decompression to <5 kbar. The Lower series migmatites form a composite S1–S2 fabric; the garnet‐bearing assemblage suggests peak P–T conditions of >5 kbar at suprasolidus conditions. Almost complete consumption of garnet and late cordierite growth points to post‐D2 equilibration at <4 kbar and <750 °C. The early metamorphic history associated with the S1 fabric is interpreted as a result of horizontal middle crustal flow associated with progressive heating and possible burial. The upright F2 folding and S2 foliation are associated with a pressure decrease coeval with the intrusion of mafic magma at mid‐crustal levels. The D2 tectono‐metamorphic evolution may be explained by a crustal‐scale doming associated with emplacement of mafic magmas into the core of the dome.     

Deformational and crystallization history of the Precambrian rocks in north-central Aravalli Mountain,Rajasthan, India

Large-scale structures, textures and mineral assemblages in the Precambrian rocks of the Banded Gneissic Complex and the overlying Delhi Group in north-central Aravalli Mountain reveal a complex deformational-crystallization history. In the basement Gneissic Complex at least three deformational events, D₀, D₁ and D₂, and two separate episodes of metamorphism, M₁ and M₂, are recognized. The supracrustal Delhi Rocks display only two phases of deformation, D₁ and D₂, associated with a single protracted period of metamorphism, M₂.The first phase of deformation (D₁) of the Delhi orogeny (1650-900 m.y.) produced large isoclinal folds that are overturned towards the southeast and have gentle plunges in NE and SW directions. The second phase of deformation (D₂) gave rise to tight open folds on the limbs and axial-plane surfaces of the D₁ folds. These folds generally plunge towards the N and NNW at 30°–80°. In the Basement Complex one more deformation (D₀) of the Pre-Delhi orogeny (> 2000 m.y.) is recorded by the presence of reclined and recumbent folds with W to WNW trending fold axes. The D₀ folds were superimposed by D₁ and D₂ folds during the Delhi orogeny.The three deformational events have been correlated with the crystallization periods of minerals in the rocks and a setting in time is established for this part of the Aravalli range.     

Deformation history of the ophiolite sequence from the Balagne Nappe,northern Corsica: insights in the tectonic evolution of Alpine Corsica

In Alpine Corsica, the Jurassic ophiolites represent remnants of oceanic lithosphere belonging to the Ligure‐Piemontese Basin located between the Europe/Corsica and Adria continental margins. In the Balagne area, a Jurassic ophiolitic sequence topped by a Late Jurassic–Late Cretaceous sedimentary cover crops out at the top of the nappe pile. The whole ophiolitic succession is affected by polyphase deformation developed under very low‐grade orogenic metamorphic conditions. The original palaeogeographic location and the emplacement mechanisms for the Balagne ophiolites are still a matter of debate and different interpretations for its history have been proposed. The deformation features of the Balagne ophiolites are outlined in order to provide constraints on their history in the framework of the geodynamic evolution of Alpine Corsica. The deformation history reconstructed for the Balagne Nappe includes five different deformation phases, from D1 to D5. The D1 phase was connected with the latest Cretaceous/Palaeocene accretion into the accretionary wedge related to an east‐dipping subduction zone followed by a Late Eocene D2 phase related to emplacement onto the Europe/Corsica continental margin. The subsequent D3 phase was characterized by sinistral strike‐slip faults and related deformations of Late Eocene–Early Oligocene age. The D4 and D5 phases were developed during the Early Oligocene–Late Miocene extensional processes connected with the collapse of the Alpine belt. Copyright © 2003 John Wiley & Sons, Ltd.     

Polyphase Alpine deformation at the northern edge of the Menderes–Taurus block, North Konya, Central Turkey

Low-grade metamorphic rocks of Paleozoic–Mesozoic age to the north of Konya, consist of two different groups. The Silurian–Lower Permian Sizma Group is composed of reefal complex metacarbonates at the base, and flyschoid metaclastics at the top. Metaigneous rocks of various compositions occur as dykes, sills, and lava flows within this group. The ?Upper Permian–Mesozoic age Ardicli Group unconformably overlies the Sizma Group and is composed of, from bottom to top, coarse metaclastics, a metaclastic–metacarbonate alternation, a thick sequence of metacarbonate, and alternating units of metachert, metacarbonates and metaclastics. Although pre-Alpine overthrusts can be recognized in the Sizma Group, intense Alpine deformation has overprinted and obliterated earlier structures. Both the Sizma and Ardicli Groups were deformed, and metamorphosed during the Alpine orogeny. Within the study area evidence for four phases of deformation and folding is found. The first phase of deformation resulted in the major Ertugrul Syncline, overturned tight to isoclinal and minor folding, and penetrative axial planar cleavage developed during the Alpine crustal shortening at the peak of metamorphism. Depending on rock type, syntectonic crystallization, rotation, and flattening of grains and pressure solution were the main deformation mechanisms. During the F₂-phase, continued crustal shortening produced coaxial Type-3 refolded folds, which can generally be observed in outcrop with associated crenulation cleavage (S₂). Refolding of earlier folds by the noncoaxial F₃-folding event generated Type-2 interference patterns and the major Meydan Synform which is the largest map-scale structure within the study area. Phase 3 structures also include crenulation cleavage (S₃) and conjugate kink folds. Further shortening during phase 4 deformation also resulted in crenulation cleavage and conjugate kink folds. According to thin section observations, phases 2–4 crenulation cleavages are mainly the result of microfolding with pressure solution and mineral growth.     

Geochronology and geochemistry of high‐pressure granulites of the Arthur River Complex,Fiordland, New Zealand: Cretaceous magmatism and metamorphism on the palaeo‐Pacific Margin

The Arthur River Complex is a suite of gabbroic to dioritic orthogneisses in northern Fiordland, New Zealand. The Arthur River Complex separates rocks of the Median Tectonic Zone, a Mesozoic island arc complex, from Palaeozoic rocks of the palaeo‐Pacific Gondwana margin, and is itself intruded by the Western Fiordland Orthogneiss. New SHRIMP U/Pb single zircon data are presented for magmatic, metamorphic and deformation events in the Arthur River Complex and adjacent rocks from northern Fiordland. The Arthur River Complex orthogneisses and dykes are dominated by magmatic zircon dated at 136–129 Ma. A dioritic orthogneiss that occurs along the eastern margin of the Complex is dated at 154.4 ± 3.6 Ma and predates adjacent plutons of the Median Tectonic Zone. Rims on zircon cores from this sample record a thermal event at c. 120 Ma, attributed to the emplacement of the Western Fiordland Orthogneiss. Migmatitic Palaeozoic orthogneiss from the Arthur River Complex (346 ± 6 Ma) is interpreted as deformed wall rock. Very fine rims (5–20 µm) also indicate a metamorphic age of c. 120–110 Ma. A post‐tectonic pegmatite (81.8 ± 1.8 Ma) may be related to phases of crustal extension associated with the opening of the Tasman Sea. The Arthur River Complex is interpreted as a batholith, emplaced at mid‐crustal levels and then buried to deep crustal levels due to convergence of the Median Tectonic Zone arc and the continental margin.     

Geological evolution and structural style of the Palaeozoic Tafilalt sub‐basin,eastern Anti‐Atlas (Morocco,North Africa)

The Tafilalt is one of a number of generally unexplored sub‐basins in the eastern Anti‐Atlas of Morocco, all of which probably underwent a similar tectono‐stratigraphic evolution during the Palaeozoic Era. Analysis of over 1000 km of 2‐D seismic reflection profiles, with the interpretation of ten regional seismic sections and five isopach and isobath maps, suggests a multi‐phase deformation history for the Palaeozoic‐aged Tafilalt sub‐basins. Extensional phases were probably initiated in the Cambrian, followed by uniform thermal subsidence up to at least the end of the Silurian. Major extension and subsidence did not begin prior to Middle/Upper Devonian times. Extensional movements on the major faults bounding the basin to the north and to the south took place in synchronisation with Upper Devonian sedimentation, which provides the thickest part of the sedimentary sequence in the basin. The onset of the compressional phase in Carboniferous times is indicated by reflectors in the Carboniferous sequence progressively onlapping onto the Upper Devonian sequence. This period of compression developed folds and faults in the Upper Palaeozoic‐aged strata, producing a structural style characteristic of thin‐skinned fold and thrust belts. The Late Palaeozoic units are detached over a regional décollement with a northward tectonic vergence. The folds have been formed by the process of fault‐propagation folding related to the thrust imbricates that ramp up‐section from the décollement. Copyright © 2007 John Wiley & Sons, Ltd.     

Thrust faulting in the northern flinders range,South Australia

The geology of the Northern Flinders Range has been reinterpreted.

Three clastic units, mapped previously (1, 2), were supposed to have been evidence of three late Proterozoic transgressions over the Archaean basement. Tectonic movements resulted in east‐west folds and major fractures zones.

Recent structural and petrographic observations in the western part of the Mt Painter block lead to a reinterpretation of this region. Three tectonic phases may be observed in the Proterozoic rocks: the first phase is characterized by isoclinal folds with axial‐plane cleavage. Three thrust slices of quartzite, carbonate, and schist can be delineated. These thrust slices are separated by shear zones marked by mica schists which could be either basement or strongly deformed Adelaidean rocks. The second phase shows east‐west concentric upright folds with secondary cleavage in their hinges; this phase refolds the first‐phase structures and affects the underlying basement. The third phase created large strike‐slip faults which are superimposed on the first and second deformation.     

Neoproterozoic Granitic Magmatism and Evolution of the Eastern Dom Feliciano Belt in Southernmost Brazil: A Tectonic Model

The eastern side of the Dom Feliciano Belt consists of supracrustal rocks and granitic batholiths whose emplacements were controlled by the tectonic evolution of the belt. The evolution of this belt had both a tangential tectonic regime and a transcurrent one. The tangential regime, defined by low angle planar and linear structures with W-NW tectonic transport, was responsible for crustal thickening and tectonic imbrication and controlled the syn-kinematic injections of high-K calc-alkaline granitoid plutons of the Arroio Solidão Intrusive Suite about 800 Ma. The transcurrent regime is defined by high angle deformation sets of planar and linear structures, parallel to the elongation of the belt, and indicative of a N-NE tectonic transport. Its associated magmatism began about 672 Ma with the intrusion of the calc-alkaline granitoids of the Arroio Moinho Intrusive Suite, followed by basic dykes and the 630–617 Ma crustal melt granites of the Cordilheira Intrusive Suite. The transcurrent tectonics generated shear zones hundreds of meters in width, which probably extend deep into the mantle. At the end of this process, an extensional regime was installed and during this transition, late- to post-kinematic calc-alkaline granitoids of the Campinas Intrusive Suite were intruded. This magmatism developed during the extensive regime and is represented by the 585 Ma post-transcurrent calc-alkaline granitoids of the Canguçu Intrusive Suite. Alkaline-metaluminous granitoids of the Encruzilhada Intrusive Suite and a few small bodies of peralkaline granitoids represent the final episodes of the granitic magmatism in this region. The syn-tangential granitoids are high-K calc-alkaline and have similarities to those of a continental collision regime. The syn- to post-transcurrent high-K calc-alkaline granitoids are similar to the late- to post-orogenic injections of other orogenic belts. Peraluminous leucogranites of the Cordilheira Intrusive Suite occur also in this transcurrent tectonic setting. The main characteristics of the calc-alkaline magmatism can be related to the participation of a thick continental crust during its generation similar to the granitic systems of a continental collision. Their negative ɛNd values may reflect a magma source closely connected to the continental crust, with their igneous protoliths of relatively homogeneous composition related to a continental collision phase. This continental collision occurred concurrent with the closing of a passive platform-type basin, after the end of sedimentation and tholeiitic volcanic activities.     

Structural evolution of the Tuscan Nappe in the southeastern sector of the Apuan Alps metamorphic dome (Northern Apennines,Italy)

Structural analysis carried out in the Tuscan Nappe (TN) in the southeastern sector of the Apuan Alps highlights a structural evolution much more complex than that proposed so far. The TN has been deformed by structures developed during four deformation phases. The three early phases resulted from a compressive tectonic regime linked to the construction of the Apenninic fold‐and‐thrust‐belt. The fourth phase, instead, is connected with the extensional tectonics, probably related to the collapse of the belt and/or to the opening of the Tyrrhenian Sea. Our structural and field data suggest the following. (1) The first phase is linked to the main crustal shortening and deformation of the Tuscan Nappe in the internal sectors of the belt. (2) The second deformation phase is responsible for the prominent NW–SE‐trending folds recognized in the study area (Mt. Pescaglino and Pescaglia antiforms and Mt. Piglione and Mt. Prana synforms). (3) The direction of shortening related to the third phase is parallel to the main structural trend of the belt. (4) The interference between the third folding phase and the earlier two tectonic phases could be related to the development of the metamorphic domes. The two directions of horizontal shortening induced buckling and vertical growth of the metamorphic domes, enhancing the process of exhumation of the metamorphic rocks. (5) The exhumation of the Tuscan Nappe occurred mostly in a compressive tectonic setting. A new model for the exhumation of the metamorphic dome of the Apuan Alps is proposed. Its tectonic evolution does not fit with the previously suggested core complex model, but is due to compressive tectonics. Copyright © 2004 John Wiley & Sons, Ltd.     

The Migif–Hafafit gneissic complex of the Egyptian Eastern Desert: fold interference patterns involving multiply deformed sheath folds

The Wadi Hafafit Complex (WHC) is an arcuate belt of orthogneisses, migmatites and other high-grade metamorphic rocks, which marks the boundary between the Central Eastern and the South Eastern Deserts of Egypt. In the WHC, gneissic meta-gabbro outlines macroscopic fold interference patterns characterized by elliptical to irregular culminations cored by gneissic meta-tonalite to meta-trondhjemite. The five main culminations of the WHC have previously been labeled A (most northerly), B, C, D and E (most southerly). A detailed structural investigation of B, C, D and E reveals that these structures are a result of the interference of four macroscopic fold phases, the first three of which may represent a single deformation event. The first folding involved sheath-like fold nappes, which were transported to the N or NW, assisted by translation on gently dipping mylonite zones. The regional gneissosity and mineral extension lineations formed during this folding event. The fold nappes were deformed by mainly open upright small macroscopic and mesocopic folds with approximately NE-trending hinges. As a probable continuation of the latter folding, the sheaths were buckled into large macroscopic folds and monoclines with the same NE-trends. The fourth macroscopic folding resulted from shortening along the NE–SW direction, producing mainly NW–SE-trending upright gently plunging folds. Gravitative uplift is disputed as a component of the deformation history of the WHC. The peculiarities of the fold interference pattern result from the interesting behaviour of sheath folds during their refolding.     

Rootless calc-silicate folds in granite: An implication towards syn- to post-plutonic emplacement

Deformation of the Champaner Group of rocks that form a part of Southern Aravalli Mountain Belt, western India, occurred during the Grenville orogeny (ca. 1400–935 Ma). Two phases of deformation are recorded: \(\hbox {D}_{1}\), persistent throughout the group and characterised by westerly plunging tight isoclinal folds and \(\hbox {D}_{2}\), a localized phase of deformation associated with shortening of the earlier folds from the eastern margin. Both the phases of deformation are in association with the syn-tectonically emplaced Godhra granite. The present work records rootless calc-silicate folds in granite belonging to the older formation, located at the eastern fringe of the Champaner Group. Field evidences suggest superimposition of Type 2 interference pattern trending NE–SW over rootless Type 0 of varying trends from NW–SE to N–S. The superposed pattern obtained from the field study differs in terms of structural trends with the neighbouring Precambrian stratigraphic units. These stratigraphic units include the Champaner Group to which the study area belongs, the Kadana Formation of the Lunavada Group and Pre-Chamapaner Gneissic Complex. Rootless character of folds found within the study area imply syn-post plutonic emplacement of Godhra granite.     

Polyphase Deformation of the Weihai-Rongcheng UHP Unit Rocks, NE Sulu： Insights into the Tectonic Evolution of the Dabie-Sulu UHP and HP Belts, China

Different scales of structural data reveal a complex deformation history of ultrahigh- pressure （UHP） rocks exposed in the Weihai-Rongcbeng area, NE Sulu （northern Jiangsu-eastern Shandong）, eastern China. Excluding pre-UHP deformations, at least five major sequential deformational stages （D1-Ds） are recognized. The first deformation （DO produced a weak foliation and lineation in massive eclogites. The foliated eclogite with a dominant foliation containing a stretching and mineral lineation was developed during the I）2 deformation. Both the D1 and D2 deformations occurred under UHP metamorphic conditions, and are well preserved in the eclogite bodies. D3 structures which developed shortly after the formation of granulite/amphibolite facies symplectites are characterized by imbricated associations marked by a regional, steeply dipping foliation, compositional layering, eclogite boudinage, isoclinal folds and reverse ductile shear zones. The D3 deformation was accompanied by decompressional partial melting. A regional, gently dipping amphibolite facies foliation and stretching lineation, low-angle detachments, and dome- and arc-shaped structures formed during the D4 deformation stage dominate to some degree the map pattern of the Weihai-Rongcbeng UHP domain. The last stage of deformation （Ds） gave rise to the final exhumation of the UHP rocks. Ds is characterized by development of brittle-dominated high-angle faulting associated with emplacement of large volmnes of undeformed granite plutons and dykes dated at 134-100 Ma. The deformational and metamorphic sequence followed by the UHP rocks in the Weihai-Rongcheng area is similar to that studied in the entire Dabie-Sulu UHP and HP metamorphic belts from microscopic to mapping scale. Based on structural data, combined with available petrographic, metamorphic and geochronological data, a speculative tectonic evolutionary model for the Dabie-Sulu UHP and IIP belts is proposed, involving continental subduction/collision between the Sino-Korean and Yangtze cratons and subsequent polyphase exhumation histories of the UHP and IIP metamorphic rocks.     

陆相湖盆沉积物滑塌变形研究进展

陆相湖盆中沉积物滑塌常造成复杂的同沉积变形,对确定古地震事件、古地形等有重要作用,系统研究滑塌变形体系有助于厘清变形成因、理解变形机理和深化区域构造背景认识。本文梳理国内外滑塌变形研究进展,总结沉积物顺坡滑塌的形成条件、滑塌变形特征,尤其是滑塌褶皱的形态演化、伴生构造、对古斜坡的指示、有关滑塌变形的物理模拟等,并结合野外变形成因的识别,探讨滑塌成因与后期构造成因变形的有效鉴别标志。综合分析认为,陆相湖盆滑塌变形与重力流沉积密不可分,单一滑塌体的褶皱形态从滑塌体后缘到前缘由圆柱状褶皱、紧闭等厚直立褶皱转变为蘑菇状褶皱,演化过程可划分为多个阶段。在滑塌褶皱中存在逆冲断层、碎屑脉体、不规则侵蚀面、软布丁构造等,引起滑塌变形的机制可分为应力作用机制和液化作用机制。物理模拟因其可改变材料物理参数的优势,可能成为未来滑塌变形的重要研究方向。指出在鉴别滑塌成因变形和后期构造成因变形研究中仍然存在较多争议,其中未固结沉积物的活化、再改造、生物扰动、液化现象的存在是确定软沉积物变形的关键,变形构造在大尺度、层系规模上具有相同的应力场并与区域构造背景相符合是后期构造成因变形的最有力证据。     

Complex and imitation Tectonites from the Kosciusko Pluton,snowy mountains,New South Wales

Rocks of Upper Precambrian age near Adelaide show evidence of two or more phases of deformation. The first phase has resulted in concentric and similar folds with an associated slaty cleavage. Structures of this phase are overprinted by folds with associated crenulation cleavage. Minor occurrences of later kink folds are also observed. The hypothesis that the first phase folds overprint very large folds not observable in the field is examined. The observed variation in the attitude of first phase folds could also have resulted from large scale inhomogeneities of strain.

1 “Torrens Group” is used in place of the “Torrensian Series” of Mawson and Sprigg (1950) at the suggestion of Daily (1963) since the Torrensian Series has an unwarranted time significance.

2 The scale of folds follows that of Weiss (1957). Macroscopic‐folds larger than a single outcrop. Mesoscopic‐folds on the scale of a hand specimen or single outcrop. Microscopic‐folds on the scale of a thin section.     

Discussion on initial mechanism of the Tan-Lu fault zone北大核心CSCD

The Dabie and Sulu orogens between the North China and the Yangtze cratons were left-laterally offset about 4(H) km along the NE-striking Tan-Lu Fault Zone. The fault zone terminates abruptly at the southeastern corner of the Dabie Orogen, suggesting unique origin of the fault zone which remains controversial. Structures in the Zhangbaling Croup and Feidong Complex in the Zhangbaling Uplift formed in a flat-lying ductile detachment zone with a shear sense of top to the SSW. Whereas, the Tan-Lu shear zone in the l.ujiang area exhibits as a sinistral ductile shear zone. Thus, the Tan-Lu Fault Zone in the east of the Dabie Orogen experienced two phases of deformation. The first phase deformation exhibits as sinistral ductile shear belts, the sinistral ductile shear zone was then involved in the NK-SW trending tightly folds and thrusts deformation. The Susong Complex and Zhangbaling Group in the Dabie Orogens exhibit as exhumation structures. According previous muscovite 4'Ar/,>Ar ages and deformation of syn-collisional folds and thrusts, we propose an indentation-induced continent-Tearing model for the initialization the Tan-Lu Fault Zone.     

Syn-deformational migmatites and magmatic-arc metamorphism in the Xolapa Complex, southern Mexico

The Xolapa Complex (XC) is the largest plutonic and metamorphic mid‐crustal basement unit in Mexico and represents an ancient continental magmatic‐arc. A complete range from metatexite to diatexite migmatitic structures has been produced during a single high‐grade metamorphic event. However, structural relics reveal the existence of early Cpx + Pl + Qtz ± Opx and Grt + Opx + Pl + Qtz ± Cpx pre‐migmatitic metamorphic assemblages. Field relationships and microstructural observations allow us to constrain five pre‐, syn‐ and post‐migmatitic deformational phases. It is argued that migmatitic structures and minor anatectic granites were developed during ductile recumbent folding and shear structures related to the D2–D3 phases. Late post‐migmatitic ductile‐brittle deformation is evidenced by the development of NNE trending transpressional thrusting (D4), and E–W left‐lateral mylonitic shear zones (D5). Biotite‐breakdown melting in felsic rocks and amphibole‐breakdown melting in mafic rocks, as well as geothermobarometric results, indicate that metamorphism took place at temperatures from 830 to 900 °C and pressures ranging from ≥6.3 to 9.5 kbar. Late migmatitic assemblages equilibrated in the highest temperature range along a clockwise P–T path. The relationships between the large diversity of migmatitic structures and the progressive production of melt suggest that feedback relations prevailed as a time‐marker during a contractional regime. Deformation, metamorphism, and plutonism of the XC show that this terrane evolved as a north‐east‐verging thrust system with synkinematic metamorphism and partial melting, during the Late Cretaceous – Palaeogene. The tectonothermal history of XC is analogous to a Cordilleran metamorphic magmatic‐arc formed in an accretionary tectonic framework. This new model provides constraints on the exhumation mechanism and thermal evolution of southern Mexico.